Browse Source

Clean up whitespace, headings

vanilla_fb_2.0.x
Scott Lahteine 4 years ago
parent
commit
49b5e1d9bf
  1. 1
      Marlin/src/HAL/LINUX/main.cpp
  2. 1
      Marlin/src/HAL/STM32F1/eeprom_wired.cpp
  3. 2
      Marlin/src/lcd/extui/lib/mks_ui/mks_hardware_test.cpp
  4. 6
      Marlin/src/lcd/language/language_uk.h
  5. 1
      Marlin/src/libs/BL24CXX.cpp
  6. 2
      Marlin/src/pins/stm32f4/pins_ANET_ET4.h
  7. 2
      Marlin/src/pins/stm32f4/pins_ANET_ET4P.h
  8. 2
      Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3.h

1
Marlin/src/HAL/LINUX/main.cpp

@ -1,6 +1,5 @@
/** /**
* Marlin 3D Printer Firmware * Marlin 3D Printer Firmware
*
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* *
* This program is free software: you can redistribute it and/or modify * This program is free software: you can redistribute it and/or modify

1
Marlin/src/HAL/STM32F1/eeprom_wired.cpp

@ -1,6 +1,5 @@
/** /**
* Marlin 3D Printer Firmware * Marlin 3D Printer Firmware
*
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* *
* This program is free software: you can redistribute it and/or modify * This program is free software: you can redistribute it and/or modify

2
Marlin/src/lcd/extui/lib/mks_ui/mks_hardware_test.cpp

@ -157,7 +157,7 @@ void mks_gpio_test() {
&& (READ(PE6) == 0) && (READ(PE6) == 0)
&& (READ(PE7) == 0) && (READ(PE7) == 0)
#endif #endif
) )
disp_det_ok(); disp_det_ok();
else else
disp_det_error(); disp_det_error();

6
Marlin/src/lcd/language/language_uk.h

@ -215,7 +215,7 @@ namespace Language_uk {
PROGMEM Language_Str MSG_UBL_MESH_HEIGHT_AMOUNT = _UxGT("Висота"); PROGMEM Language_Str MSG_UBL_MESH_HEIGHT_AMOUNT = _UxGT("Висота");
PROGMEM Language_Str MSG_UBL_VALIDATE_MESH_MENU = _UxGT("Підтвердити сітку"); PROGMEM Language_Str MSG_UBL_VALIDATE_MESH_MENU = _UxGT("Підтвердити сітку");
PROGMEM Language_Str MSG_UBL_VALIDATE_CUSTOM_MESH = _UxGT("Підтвердити свою"); PROGMEM Language_Str MSG_UBL_VALIDATE_CUSTOM_MESH = _UxGT("Підтвердити свою");
PROGMEM Language_Str MSG_G26_HEATING_BED = _UxGT("G26 нагрів столу"); PROGMEM Language_Str MSG_G26_HEATING_BED = _UxGT("G26 нагрів столу");
PROGMEM Language_Str MSG_G26_HEATING_NOZZLE = _UxGT("G26 нагрів сопла"); PROGMEM Language_Str MSG_G26_HEATING_NOZZLE = _UxGT("G26 нагрів сопла");
PROGMEM Language_Str MSG_G26_MANUAL_PRIME = _UxGT("Ручне грунтування"); PROGMEM Language_Str MSG_G26_MANUAL_PRIME = _UxGT("Ручне грунтування");
@ -714,7 +714,7 @@ namespace Language_uk {
PROGMEM Language_Str MSG_CYCLE_MIX = _UxGT("Циклічне змішування"); PROGMEM Language_Str MSG_CYCLE_MIX = _UxGT("Циклічне змішування");
PROGMEM Language_Str MSG_GRADIENT_MIX = _UxGT("Градієнт змішування"); PROGMEM Language_Str MSG_GRADIENT_MIX = _UxGT("Градієнт змішування");
PROGMEM Language_Str MSG_REVERSE_GRADIENT = _UxGT("Змінити градієнт"); PROGMEM Language_Str MSG_REVERSE_GRADIENT = _UxGT("Змінити градієнт");
#if LCD_WIDTH > 21 #if LCD_WIDTH > 21
PROGMEM Language_Str MSG_ACTIVE_VTOOL = _UxGT("Активація В-інструменту"); PROGMEM Language_Str MSG_ACTIVE_VTOOL = _UxGT("Активація В-інструменту");
PROGMEM Language_Str MSG_GRADIENT_ALIAS = _UxGT("Псевдонім В-інструменту"); PROGMEM Language_Str MSG_GRADIENT_ALIAS = _UxGT("Псевдонім В-інструменту");
@ -728,7 +728,7 @@ namespace Language_uk {
PROGMEM Language_Str MSG_END_VTOOL = _UxGT("Кінець В-інструменту"); PROGMEM Language_Str MSG_END_VTOOL = _UxGT("Кінець В-інструменту");
PROGMEM Language_Str MSG_COMMIT_VTOOL = _UxGT("Змішати В-інструменти"); PROGMEM Language_Str MSG_COMMIT_VTOOL = _UxGT("Змішати В-інструменти");
PROGMEM Language_Str MSG_VTOOLS_RESET = _UxGT("В-інструменти зкинуті"); PROGMEM Language_Str MSG_VTOOLS_RESET = _UxGT("В-інструменти зкинуті");
PROGMEM Language_Str MSG_START_Z = _UxGT("Початок Z:"); PROGMEM Language_Str MSG_START_Z = _UxGT("Початок Z:");
PROGMEM Language_Str MSG_END_Z = _UxGT(" Кінець Z:"); PROGMEM Language_Str MSG_END_Z = _UxGT(" Кінець Z:");

1
Marlin/src/libs/BL24CXX.cpp

@ -1,6 +1,5 @@
/** /**
* Marlin 3D Printer Firmware * Marlin 3D Printer Firmware
*
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* *
* This program is free software: you can redistribute it and/or modify * This program is free software: you can redistribute it and/or modify

2
Marlin/src/pins/stm32f4/pins_ANET_ET4.h

@ -16,7 +16,7 @@
* GNU General Public License for more details. * GNU General Public License for more details.
* *
* You should have received a copy of the GNU General Public License * You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <https://www.gnu.org/licenses/>.
* *
*/ */

2
Marlin/src/pins/stm32f4/pins_ANET_ET4P.h

@ -16,7 +16,7 @@
* GNU General Public License for more details. * GNU General Public License for more details.
* *
* You should have received a copy of the GNU General Public License * You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <https://www.gnu.org/licenses/>.
* *
*/ */

2
Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3.h

@ -16,7 +16,7 @@
* GNU General Public License for more details. * GNU General Public License for more details.
* *
* You should have received a copy of the GNU General Public License * You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <https://www.gnu.org/licenses/>.
* *
*/ */
#pragma once #pragma once

Loading…
Cancel
Save