Browse Source

Prusa => Průša

vanilla_fb_2.0.x
Scott Lahteine 4 years ago
parent
commit
4955aa5b78
  1. 8
      Marlin/Configuration.h
  2. 8
      Marlin/Configuration_adv.h
  3. 4
      Marlin/src/MarlinCore.cpp
  4. 2
      Marlin/src/gcode/calibrate/G76_M871.cpp
  5. 2
      Marlin/src/inc/Conditionals_LCD.h
  6. 2
      Marlin/src/inc/SanityCheck.h
  7. 2
      Marlin/src/module/thermistor/thermistors.h
  8. 2
      Marlin/src/pins/stm32f4/pins_LERDGE_S.h
  9. 2
      Marlin/src/pins/stm32f4/pins_VAKE403D.h

8
Marlin/Configuration.h

@ -177,7 +177,7 @@
#endif
/**
* Prusa Multi-Material Unit v2
* Průša Multi-Material Unit v2
*
* Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails.
* Requires EXTRUDERS = 5
@ -373,7 +373,7 @@
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
* 501 : 100K Zonestar (Tronxy X3A) Thermistor
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Prusa P802M
* 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
* 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
@ -1720,9 +1720,9 @@
#define DISPLAY_CHARSET_HD44780 JAPANESE
/**
* Info Screen Style (0:Classic, 1:Prusa)
* Info Screen Style (0:Classic, 1:Průša)
*
* :[0:'Classic', 1:'Prusa']
* :[0:'Classic', 1:'Průša']
*/
#define LCD_INFO_SCREEN_STYLE 0

8
Marlin/Configuration_adv.h

@ -2424,7 +2424,7 @@
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_09STEP_24V // 0.9 degree steppers (24V)
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
@ -3396,7 +3396,7 @@
#endif
/**
* Prusa Multi-Material Unit v2
* Průša Multi-Material Unit v2
* Enable in Configuration.h
*/
#if ENABLED(PRUSA_MMU2)
@ -3420,7 +3420,7 @@
//#define MMU2_MENUS
#if ENABLED(MMU2_MENUS)
// Settings for filament load / unload from the LCD menu.
// This is for Prusa MK3-style extruders. Customize for your hardware.
// This is for Průša MK3-style extruders. Customize for your hardware.
#define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0
#define MMU2_LOAD_TO_NOZZLE_SEQUENCE \
{ 7.2, 1145 }, \
@ -3446,7 +3446,7 @@
/**
* MMU Extruder Sensor
*
* Support for a Prusa (or other) IR Sensor to detect filament near the extruder
* Support for a Průša (or other) IR Sensor to detect filament near the extruder
* and make loading more reliable. Suitable for an extruder equipped with a filament
* sensor less than 38mm from the gears.
*

4
Marlin/src/MarlinCore.cpp

@ -684,7 +684,7 @@ inline void manage_inactivity(const bool ignore_stepper_queue=false) {
* - Read Buttons and Update the LCD
* - Run i2c Position Encoders
* - Auto-report Temperatures / SD Status
* - Update the Prusa MMU2
* - Update the Průša MMU2
* - Handle Joystick jogging
*/
void idle(TERN_(ADVANCED_PAUSE_FEATURE, bool no_stepper_sleep/*=false*/)) {
@ -760,7 +760,7 @@ void idle(TERN_(ADVANCED_PAUSE_FEATURE, bool no_stepper_sleep/*=false*/)) {
}
#endif
// Update the Prusa MMU2
// Update the Průša MMU2
TERN_(PRUSA_MMU2, mmu2.mmu_loop());
// Handle Joystick jogging

2
Marlin/src/gcode/calibrate/G76_M871.cpp

@ -45,7 +45,7 @@
* - When calibrating bed, probe temperature is held constant.
* Compensation values are deltas to first probe measurement at bed temp. = 60°C.
* - The hotend will not be heated at any time.
* - On my Prusa MK3S clone I put a piece of paper between the probe and the hotend
* - On my Průša MK3S clone I put a piece of paper between the probe and the hotend
* so the hotend fan would not cool my probe constantly. Alternativly you could just
* make sure the fan is not running while running the calibration process.
*

2
Marlin/src/inc/Conditionals_LCD.h

@ -512,7 +512,7 @@
#undef DISABLE_INACTIVE_EXTRUDER
#endif
// Prusa MK2 Multiplexer and MMU 2.0 force SINGLENOZZLE
// Průša MK2 Multiplexer and MMU 2.0 force SINGLENOZZLE
#if EITHER(MK2_MULTIPLEXER, PRUSA_MMU2)
#define SINGLENOZZLE
#endif

2
Marlin/src/inc/SanityCheck.h

@ -2876,7 +2876,7 @@ static_assert( _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
#endif
/**
* Prusa MMU2 requirements
* Průša MMU2 requirements
*/
#if ENABLED(PRUSA_MMU2)
#if EXTRUDERS != 5

2
Marlin/src/module/thermistor/thermistors.h

@ -72,7 +72,7 @@ typedef struct { int16_t value, celsius; } temp_entry_t;
#if ANY_THERMISTOR_IS(501) // 100K Zonestar thermistor
#include "thermistor_501.h"
#endif
#if ANY_THERMISTOR_IS(502) // Unknown thermistor used by the Zonestar Prusa P802M hot bed
#if ANY_THERMISTOR_IS(502) // Unknown thermistor used by the Zonestar Průša P802M hot bed
#include "thermistor_502.h"
#endif
#if ANY_THERMISTOR_IS(512) // 100k thermistor in RPW-Ultra hotend, Pull-up = 4.7 kOhm, "unknown model"

2
Marlin/src/pins/stm32f4/pins_LERDGE_S.h

@ -127,7 +127,7 @@
#endif
//
// Prusa i3 MK2 Multi Material Multiplexer Support
// Průša i3 MK2 Multi Material Multiplexer Support
//
//#define E_MUX0_PIN -1
//#define E_MUX1_PIN -1

2
Marlin/src/pins/stm32f4/pins_VAKE403D.h

@ -147,7 +147,7 @@
//#define NEOPIXEL_PIN PF13
//
// Prusa i3 MK2 Multi Material Multiplexer Support
// Průša i3 MK2 Multi Material Multiplexer Support
//
//#define E_MUX0_PIN PG3
//#define E_MUX1_PIN PG4

Loading…
Cancel
Save