Browse Source

enable ENSURE_SMOOTH_MOVES

pull/1/head
Michael Henke 8 years ago
committed by Michael Henke
parent
commit
47729918fc
No known key found for this signature in database GPG Key ID: 4301AB1812B51829
  1. 8
      Marlin/example_configurations/delta/flsun_kossel_mini/Configuration.h
  2. 5
      Marlin/example_configurations/delta/flsun_kossel_mini/Configuration_adv.h

8
Marlin/example_configurations/delta/flsun_kossel_mini/Configuration.h

@ -908,8 +908,8 @@
// Set the number of grid points per dimension. // Set the number of grid points per dimension.
// Works best with 5 or more points in each dimension. // Works best with 5 or more points in each dimension.
#define ABL_GRID_POINTS_X 9 #define ABL_GRID_MAX_POINTS_X 9
#define ABL_GRID_POINTS_Y ABL_GRID_POINTS_X #define ABL_GRID_MAX_POINTS_Y ABL_GRID_MAX_POINTS_X
// Set the boundaries for probing (where the probe can reach). // Set the boundaries for probing (where the probe can reach).
#define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 15) #define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 15)
@ -1042,11 +1042,11 @@
// Preheat Constants // Preheat Constants
#define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_HOTEND 180
#define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_BED 70
#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
#define PREHEAT_2_TEMP_HOTEND 240 #define PREHEAT_2_TEMP_HOTEND 240
#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_BED 100
#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
// //
// Nozzle Park -- EXPERIMENTAL // Nozzle Park -- EXPERIMENTAL

5
Marlin/example_configurations/delta/flsun_kossel_mini/Configuration_adv.h

@ -217,12 +217,13 @@
* Multiple extruders can be assigned to the same pin in which case * Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold. * the fan will turn on when any selected extruder is above the threshold.
*/ */
#define E0_AUTO_FAN_PIN -1 #define E0_AUTO_FAN_PIN -1
#define E1_AUTO_FAN_PIN -1 #define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
// Define a pin to turn case light on/off // Define a pin to turn case light on/off
//#define CASE_LIGHT_PIN 4 //#define CASE_LIGHT_PIN 4
@ -529,7 +530,7 @@
// interrupts (without LCD update). By enforcing a minimum time-per-move, the buffer is prevented from // interrupts (without LCD update). By enforcing a minimum time-per-move, the buffer is prevented from
// draining. // draining.
// //
//#define ENSURE_SMOOTH_MOVES #define ENSURE_SMOOTH_MOVES
#if ENABLED(ENSURE_SMOOTH_MOVES) #if ENABLED(ENSURE_SMOOTH_MOVES)
//#define ALWAYS_ALLOW_MENU // If enabled, the menu will always be responsive. //#define ALWAYS_ALLOW_MENU // If enabled, the menu will always be responsive.
// WARNING: Menu navigation during short moves may cause stuttering! // WARNING: Menu navigation during short moves may cause stuttering!

Loading…
Cancel
Save