andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

✨ MAX7219 idle profiler (#24375)

FB4S_WIFI
tombrazier 3 years ago
committed by Scott Lahteine
parent
537af0bb03
commit
4694a7fe74
4 changed files with 150 additions and 48 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 12
      Marlin/Configuration_adv.h
  2. 4
      Marlin/src/MarlinCore.cpp
  3. 104
      Marlin/src/feature/max7219.cpp
  4. 78
      Marlin/src/feature/max7219.h

12
Marlin/Configuration_adv.h
View File

@ -3595,7 +3595,7 @@
// ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander
// the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ...
// (250000 / SPINDLE_LASER_FREQUENCY) = max value.
#endif
#endif
//#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11
#if ENABLED(AIR_EVACUATION)
@ -4289,7 +4289,8 @@
#define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain.
#define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°)
// connector at: right=0 bottom=-90 top=90 left=180
//#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order
//#define MAX7219_REVERSE_ORDER // The order of the LED matrix units may be reversed
//#define MAX7219_REVERSE_EACH // The LEDs in each matrix unit row may be reversed
//#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side
/**
@ -4297,12 +4298,15 @@
* If you add more debug displays, be careful to avoid conflicts!
*/
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning
#define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row
#define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row
#define MAX7219_DEBUG_PLANNER_HEAD 2 // Show the planner queue head position on this and the next LED matrix row
#define MAX7219_DEBUG_PLANNER_TAIL 4 // Show the planner queue tail position on this and the next LED matrix row
#define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row
// If you experience stuttering, reboots, etc. this option can reveal how
// tweaks made to the configuration are affecting the printer in real-time.
#define MAX7219_DEBUG_PROFILE 6 // Display the fraction of CPU time spent in profiled code on this LED matrix
// row. By default idle() is profiled so this shows how "idle" the processor is.
// See class CodeProfiler.
#endif
/**

4
Marlin/src/MarlinCore.cpp
View File

@ -776,6 +776,10 @@ inline void manage_inactivity(const bool no_stepper_sleep=false) {
* - Handle Joystick jogging
*/
void idle(bool no_stepper_sleep/*=false*/) {
#ifdef MAX7219_DEBUG_PROFILE
CodeProfiler idle_profiler;
#endif
#if ENABLED(MARLIN_DEV_MODE)
static uint16_t idle_depth = 0;
if (++idle_depth > 5) SERIAL_ECHOLNPGM("idle() call depth: ", idle_depth);

104
Marlin/src/feature/max7219.cpp
View File

@ -62,6 +62,15 @@
#error "MAX7219_ROTATE must be a multiple of +/- 90°."
#endif
#ifdef MAX7219_DEBUG_PROFILE
CodeProfiler::Mode CodeProfiler::mode = ACCUMULATE_AVERAGE;
uint8_t CodeProfiler::instance_count = 0;
uint32_t CodeProfiler::last_calc_time = micros();
uint8_t CodeProfiler::time_fraction = 0;
uint32_t CodeProfiler::total_time = 0;
uint16_t CodeProfiler::call_count = 0;
#endif
Max7219 max7219;
uint8_t Max7219::led_line[MAX7219_LINES]; // = { 0 };
@ -69,7 +78,7 @@ uint8_t Max7219::suspended; // = 0;
#define LINE_REG(Q) (max7219_reg_digit0 + ((Q) & 0x7))
#if _ROT == 0 || _ROT == 270
#if (_ROT == 0 || _ROT == 270) == DISABLED(MAX7219_REVERSE_EACH)
#define _LED_BIT(Q) (7 - ((Q) & 0x7))
#else
#define _LED_BIT(Q) ((Q) & 0x7)
@ -266,26 +275,27 @@ void Max7219::set(const uint8_t line, const uint8_t bits) {
#endif // MAX7219_NUMERIC
// Modify a single LED bit and send the changed line
void Max7219::led_set(const uint8_t x, const uint8_t y, const bool on) {
void Max7219::led_set(const uint8_t x, const uint8_t y, const bool on, uint8_t * const rcm/*=nullptr*/) {
if (x >= MAX7219_X_LEDS || y >= MAX7219_Y_LEDS) return error(F("led_set"), x, y);
if (BIT_7219(x, y) == on) return;
XOR_7219(x, y);
refresh_unit_line(LED_IND(x, y));
if (rcm != nullptr) *rcm |= _BV(LED_IND(x, y) & 0x07);
}
void Max7219::led_on(const uint8_t x, const uint8_t y) {
void Max7219::led_on(const uint8_t x, const uint8_t y, uint8_t * const rcm/*=nullptr*/) {
if (x >= MAX7219_X_LEDS || y >= MAX7219_Y_LEDS) return error(F("led_on"), x, y);
led_set(x, y, true);
led_set(x, y, true, rcm);
}
void Max7219::led_off(const uint8_t x, const uint8_t y) {
void Max7219::led_off(const uint8_t x, const uint8_t y, uint8_t * const rcm/*=nullptr*/) {
if (x >= MAX7219_X_LEDS || y >= MAX7219_Y_LEDS) return error(F("led_off"), x, y);
led_set(x, y, false);
led_set(x, y, false, rcm);
}
void Max7219::led_toggle(const uint8_t x, const uint8_t y) {
void Max7219::led_toggle(const uint8_t x, const uint8_t y, uint8_t * const rcm/*=nullptr*/) {
if (x >= MAX7219_X_LEDS || y >= MAX7219_Y_LEDS) return error(F("led_toggle"), x, y);
led_set(x, y, !BIT_7219(x, y));
led_set(x, y, !BIT_7219(x, y), rcm);
}
void Max7219::send_row(const uint8_t row) {
@ -448,7 +458,7 @@ void Max7219::register_setup() {
pulse_load(); // Tell the chips to load the clocked out data
}
#ifdef MAX7219_INIT_TEST
#if MAX7219_INIT_TEST
uint8_t test_mode = 0;
millis_t next_patt_ms;
@ -536,13 +546,9 @@ void Max7219::init() {
register_setup();
LOOP_LE_N(i, 7) { // Empty registers to turn all LEDs off
led_line[i] = 0x00;
send(max7219_reg_digit0 + i, 0);
pulse_load(); // Tell the chips to load the clocked out data
}
clear();
#ifdef MAX7219_INIT_TEST
#if MAX7219_INIT_TEST
start_test_pattern();
#endif
}
@ -554,41 +560,47 @@ void Max7219::init() {
*/
// Apply changes to update a marker
void Max7219::mark16(const uint8_t pos, const uint8_t v1, const uint8_t v2) {
void Max7219::mark16(const uint8_t pos, const uint8_t v1, const uint8_t v2, uint8_t * const rcm/*=nullptr*/) {
#if MAX7219_X_LEDS > 8 // At least 16 LEDs on the X-Axis. Use single line.
led_off(v1 & 0xF, pos);
led_on(v2 & 0xF, pos);
led_off(v1 & 0xF, pos, rcm);
led_on(v2 & 0xF, pos, rcm);
#elif MAX7219_Y_LEDS > 8 // At least 16 LEDs on the Y-Axis. Use a single column.
led_off(pos, v1 & 0xF);
led_on(pos, v2 & 0xF);
led_off(pos, v1 & 0xF, rcm);
led_on(pos, v2 & 0xF, rcm);
#else // Single 8x8 LED matrix. Use two lines to get 16 LEDs.
led_off(v1 & 0x7, pos + (v1 >= 8));
led_on(v2 & 0x7, pos + (v2 >= 8));
led_off(v1 & 0x7, pos + (v1 >= 8), rcm);
led_on(v2 & 0x7, pos + (v2 >= 8), rcm);
#endif
}
// Apply changes to update a tail-to-head range
void Max7219::range16(const uint8_t y, const uint8_t ot, const uint8_t nt, const uint8_t oh, const uint8_t nh) {
void Max7219::range16(const uint8_t y, const uint8_t ot, const uint8_t nt, const uint8_t oh,
const uint8_t nh, uint8_t * const rcm/*=nullptr*/) {
#if MAX7219_X_LEDS > 8 // At least 16 LEDs on the X-Axis. Use single line.
if (ot != nt) for (uint8_t n = ot & 0xF; n != (nt & 0xF) && n != (nh & 0xF); n = (n + 1) & 0xF)
led_off(n & 0xF, y);
led_off(n & 0xF, y, rcm);
if (oh != nh) for (uint8_t n = (oh + 1) & 0xF; n != ((nh + 1) & 0xF); n = (n + 1) & 0xF)
led_on(n & 0xF, y);
led_on(n & 0xF, y, rcm);
#elif MAX7219_Y_LEDS > 8 // At least 16 LEDs on the Y-Axis. Use a single column.
if (ot != nt) for (uint8_t n = ot & 0xF; n != (nt & 0xF) && n != (nh & 0xF); n = (n + 1) & 0xF)
led_off(y, n & 0xF);
led_off(y, n & 0xF, rcm);
if (oh != nh) for (uint8_t n = (oh + 1) & 0xF; n != ((nh + 1) & 0xF); n = (n + 1) & 0xF)
led_on(y, n & 0xF);
led_on(y, n & 0xF, rcm);
#else // Single 8x8 LED matrix. Use two lines to get 16 LEDs.
if (ot != nt) for (uint8_t n = ot & 0xF; n != (nt & 0xF) && n != (nh & 0xF); n = (n + 1) & 0xF)
led_off(n & 0x7, y + (n >= 8));
led_off(n & 0x7, y + (n >= 8), rcm);
if (oh != nh) for (uint8_t n = (oh + 1) & 0xF; n != ((nh + 1) & 0xF); n = (n + 1) & 0xF)
led_on(n & 0x7, y + (n >= 8));
led_on(n & 0x7, y + (n >= 8), rcm);
#endif
}
// Apply changes to update a quantity
void Max7219::quantity16(const uint8_t pos, const uint8_t ov, const uint8_t nv) {
void Max7219::quantity(const uint8_t pos, const uint8_t ov, const uint8_t nv, uint8_t * const rcm/*=nullptr*/) {
for (uint8_t i = _MIN(nv, ov); i < _MAX(nv, ov); i++)
led_set(i, pos, nv >= ov, rcm);
}
void Max7219::quantity16(const uint8_t pos, const uint8_t ov, const uint8_t nv, uint8_t * const rcm/*=nullptr*/) {
for (uint8_t i = _MIN(nv, ov); i < _MAX(nv, ov); i++)
led_set(
#if MAX7219_X_LEDS > 8 // At least 16 LEDs on the X-Axis. Use single line.
@ -599,6 +611,7 @@ void Max7219::quantity16(const uint8_t pos, const uint8_t ov, const uint8_t nv)
i >> 1, pos + (i & 1)
#endif
, nv >= ov
, rcm
);
}
@ -636,16 +649,20 @@ void Max7219::idle_tasks() {
register_setup();
}
#ifdef MAX7219_INIT_TEST
#if MAX7219_INIT_TEST
if (test_mode) {
run_test_pattern();
return;
}
#endif
// suspend updates and record which lines have changed for batching later
suspended++;
uint8_t row_change_mask = 0x00;
#if ENABLED(MAX7219_DEBUG_PRINTER_ALIVE)
if (do_blink) {
led_toggle(MAX7219_X_LEDS - 1, MAX7219_Y_LEDS - 1);
led_toggle(MAX7219_X_LEDS - 1, MAX7219_Y_LEDS - 1, &row_change_mask);
next_blink = ms + 1000;
}
#endif
@ -655,7 +672,7 @@ void Max7219::idle_tasks() {
static int16_t last_head_cnt = 0xF, last_tail_cnt = 0xF;
if (last_head_cnt != head || last_tail_cnt != tail) {
range16(MAX7219_DEBUG_PLANNER_HEAD, last_tail_cnt, tail, last_head_cnt, head);
range16(MAX7219_DEBUG_PLANNER_HEAD, last_tail_cnt, tail, last_head_cnt, head, &row_change_mask);
last_head_cnt = head;
last_tail_cnt = tail;
}
@ -665,7 +682,7 @@ void Max7219::idle_tasks() {
#ifdef MAX7219_DEBUG_PLANNER_HEAD
static int16_t last_head_cnt = 0x1;
if (last_head_cnt != head) {
mark16(MAX7219_DEBUG_PLANNER_HEAD, last_head_cnt, head);
mark16(MAX7219_DEBUG_PLANNER_HEAD, last_head_cnt, head, &row_change_mask);
last_head_cnt = head;
}
#endif
@ -673,7 +690,7 @@ void Max7219::idle_tasks() {
#ifdef MAX7219_DEBUG_PLANNER_TAIL
static int16_t last_tail_cnt = 0x1;
if (last_tail_cnt != tail) {
mark16(MAX7219_DEBUG_PLANNER_TAIL, last_tail_cnt, tail);
mark16(MAX7219_DEBUG_PLANNER_TAIL, last_tail_cnt, tail, &row_change_mask);
last_tail_cnt = tail;
}
#endif
@ -684,11 +701,26 @@ void Max7219::idle_tasks() {
static int16_t last_depth = 0;
const int16_t current_depth = (head - tail + BLOCK_BUFFER_SIZE) & (BLOCK_BUFFER_SIZE - 1) & 0xF;
if (current_depth != last_depth) {
quantity16(MAX7219_DEBUG_PLANNER_QUEUE, last_depth, current_depth);
quantity16(MAX7219_DEBUG_PLANNER_QUEUE, last_depth, current_depth, &row_change_mask);
last_depth = current_depth;
}
#endif
#ifdef MAX7219_DEBUG_PROFILE
static uint8_t last_time_fraction = 0;
const uint8_t current_time_fraction = (uint16_t(CodeProfiler::get_time_fraction()) * MAX7219_NUMBER_UNITS + 8) / 16;
if (current_time_fraction != last_time_fraction) {
quantity(MAX7219_DEBUG_PROFILE, last_time_fraction, current_time_fraction, &row_change_mask);
last_time_fraction = current_time_fraction;
}
#endif
// batch line updates
suspended--;
if (!suspended)
LOOP_L_N(i, 8) if (row_change_mask & _BV(i))
refresh_line(i);
// After resume() automatically do a refresh()
if (suspended == 0x80) {
suspended = 0;

78
Marlin/src/feature/max7219.h
View File

@ -73,6 +73,67 @@
#define max7219_reg_shutdown 0x0C
#define max7219_reg_displayTest 0x0F
#ifdef MAX7219_DEBUG_PROFILE
// This class sums up the amount of time for which its instances exist.
// By default there is one instantiated for the duration of the idle()
// function. But an instance can be created in any code block to measure
// the time spent from the point of instantiation until the CPU leaves
// block. Be careful about having multiple instances of CodeProfiler as
// it does not guard against double counting. In general mixing ISR and
// non-ISR use will require critical sections but note that mode setting
// is atomic so the total or average times can safely be read if you set
// mode to FREEZE first.
class CodeProfiler {
public:
enum Mode : uint8_t { ACCUMULATE_AVERAGE, ACCUMULATE_TOTAL, FREEZE };
private:
static Mode mode;
static uint8_t instance_count;
static uint32_t last_calc_time;
static uint32_t total_time;
static uint8_t time_fraction;
static uint16_t call_count;
uint32_t start_time;
public:
CodeProfiler() : start_time(micros()) { instance_count++; }
~CodeProfiler() {
instance_count--;
if (mode == FREEZE) return;
call_count++;
const uint32_t now = micros();
total_time += now - start_time;
if (mode == ACCUMULATE_TOTAL) return;
// update time_fraction every hundred milliseconds
if (instance_count == 0 && ELAPSED(now, last_calc_time + 100000)) {
time_fraction = total_time * 128 / (now - last_calc_time);
last_calc_time = now;
total_time = 0;
}
}
static void set_mode(Mode _mode) { mode = _mode; }
static void reset() {
time_fraction = 0;
last_calc_time = micros();
total_time = 0;
call_count = 0;
}
// returns fraction of total time which was measured, scaled from 0 to 128
static uint8_t get_time_fraction() { return time_fraction; }
// returns total time in microseconds
static uint32_t get_total_time() { return total_time; }
static uint16_t get_call_count() { return call_count; }
};
#endif
class Max7219 {
public:
static uint8_t led_line[MAX7219_LINES];
@ -110,10 +171,10 @@ public:
#endif
// Set a single LED by XY coordinate
static void led_set(const uint8_t x, const uint8_t y, const bool on);
static void led_on(const uint8_t x, const uint8_t y);
static void led_off(const uint8_t x, const uint8_t y);
static void led_toggle(const uint8_t x, const uint8_t y);
static void led_set(const uint8_t x, const uint8_t y, const bool on, uint8_t * const rcm=nullptr);
static void led_on(const uint8_t x, const uint8_t y, uint8_t * const rcm=nullptr);
static void led_off(const uint8_t x, const uint8_t y, uint8_t * const rcm=nullptr);
static void led_toggle(const uint8_t x, const uint8_t y, uint8_t * const rcm=nullptr);
// Set all LEDs in a single column
static void set_column(const uint8_t col, const uint32_t val);
@ -147,11 +208,12 @@ private:
static void set(const uint8_t line, const uint8_t bits);
static void send_row(const uint8_t row);
static void send_column(const uint8_t col);
static void mark16(const uint8_t y, const uint8_t v1, const uint8_t v2);
static void range16(const uint8_t y, const uint8_t ot, const uint8_t nt, const uint8_t oh, const uint8_t nh);
static void quantity16(const uint8_t y, const uint8_t ov, const uint8_t nv);
static void mark16(const uint8_t y, const uint8_t v1, const uint8_t v2, uint8_t * const rcm=nullptr);
static void range16(const uint8_t y, const uint8_t ot, const uint8_t nt, const uint8_t oh, const uint8_t nh, uint8_t * const rcm=nullptr);
static void quantity(const uint8_t y, const uint8_t ov, const uint8_t nv, uint8_t * const rcm=nullptr);
static void quantity16(const uint8_t y, const uint8_t ov, const uint8_t nv, uint8_t * const rcm=nullptr);
#ifdef MAX7219_INIT_TEST
#if MAX7219_INIT_TEST
static void test_pattern();
static void run_test_pattern();
static void start_test_pattern();

Write Preview
Loading…
Cancel
Save