|
|
|
@ -113,6 +113,10 @@ |
|
|
|
#include "../../module/temperature.h" |
|
|
|
#include "../../lcd/marlinui.h" |
|
|
|
|
|
|
|
#if ENABLED(UBL_HILBERT_CURVE) |
|
|
|
#include "../../feature/bedlevel/hilbert_curve.h" |
|
|
|
#endif |
|
|
|
|
|
|
|
#define EXTRUSION_MULTIPLIER 1.0 |
|
|
|
#define PRIME_LENGTH 10.0 |
|
|
|
#define OOZE_AMOUNT 0.3 |
|
|
|
@ -145,24 +149,9 @@ |
|
|
|
|
|
|
|
constexpr float g26_e_axis_feedrate = 0.025; |
|
|
|
|
|
|
|
static MeshFlags circle_flags, horizontal_mesh_line_flags, vertical_mesh_line_flags; |
|
|
|
static MeshFlags circle_flags; |
|
|
|
float g26_random_deviation = 0.0; |
|
|
|
|
|
|
|
static bool g26_retracted = false; // Track the retracted state of the nozzle so mismatched
|
|
|
|
// retracts/recovers won't result in a bad state.
|
|
|
|
|
|
|
|
float g26_extrusion_multiplier, |
|
|
|
g26_retraction_multiplier, |
|
|
|
g26_layer_height, |
|
|
|
g26_prime_length; |
|
|
|
|
|
|
|
xy_pos_t g26_xy_pos; // = { 0, 0 }
|
|
|
|
|
|
|
|
int16_t g26_bed_temp, |
|
|
|
g26_hotend_temp; |
|
|
|
|
|
|
|
int8_t g26_prime_flag; |
|
|
|
|
|
|
|
#if HAS_LCD_MENU |
|
|
|
|
|
|
|
/**
|
|
|
|
@ -178,52 +167,17 @@ int8_t g26_prime_flag; |
|
|
|
|
|
|
|
#endif |
|
|
|
|
|
|
|
mesh_index_pair find_closest_circle_to_print(const xy_pos_t &pos) { |
|
|
|
float closest = 99999.99; |
|
|
|
mesh_index_pair out_point; |
|
|
|
|
|
|
|
out_point.pos = -1; |
|
|
|
|
|
|
|
GRID_LOOP(i, j) { |
|
|
|
if (!circle_flags.marked(i, j)) { |
|
|
|
// We found a circle that needs to be printed
|
|
|
|
const xy_pos_t m = { _GET_MESH_X(i), _GET_MESH_Y(j) }; |
|
|
|
|
|
|
|
// Get the distance to this intersection
|
|
|
|
float f = (pos - m).magnitude(); |
|
|
|
|
|
|
|
// It is possible that we are being called with the values
|
|
|
|
// to let us find the closest circle to the start position.
|
|
|
|
// But if this is not the case, add a small weighting to the
|
|
|
|
// distance calculation to help it choose a better place to continue.
|
|
|
|
f += (g26_xy_pos - m).magnitude() / 15.0f; |
|
|
|
|
|
|
|
// Add the specified amount of Random Noise to our search
|
|
|
|
if (g26_random_deviation > 1.0) f += random(0.0, g26_random_deviation); |
|
|
|
|
|
|
|
if (f < closest) { |
|
|
|
closest = f; // Found a closer un-printed location
|
|
|
|
out_point.pos.set(i, j); // Save its data
|
|
|
|
out_point.distance = closest; |
|
|
|
} |
|
|
|
} |
|
|
|
} |
|
|
|
circle_flags.mark(out_point); // Mark this location as done.
|
|
|
|
return out_point; |
|
|
|
} |
|
|
|
|
|
|
|
void move_to(const_float_t rx, const_float_t ry, const_float_t z, const_float_t e_delta) { |
|
|
|
static float last_z = -999.99; |
|
|
|
|
|
|
|
const xy_pos_t dest = { rx, ry }; |
|
|
|
|
|
|
|
const bool has_xy_component = dest != current_position; // Check if X or Y is involved in the movement.
|
|
|
|
const bool has_e_component = e_delta != 0.0; |
|
|
|
|
|
|
|
destination = current_position; |
|
|
|
const bool has_xy_component = dest != current_position, // Check if X or Y is involved in the movement.
|
|
|
|
has_e_component = e_delta != 0.0; |
|
|
|
|
|
|
|
if (z != last_z) { |
|
|
|
last_z = destination.z = z; |
|
|
|
last_z = z; |
|
|
|
destination.set(current_position.x, current_position.y, z, current_position.e); |
|
|
|
const feedRate_t fr_mm_s = planner.settings.max_feedrate_mm_s[Z_AXIS] * 0.5f; // Use half of the Z_AXIS max feed rate
|
|
|
|
prepare_internal_move_to_destination(fr_mm_s); |
|
|
|
} |
|
|
|
@ -239,241 +193,293 @@ void move_to(const_float_t rx, const_float_t ry, const_float_t z, const_float_t |
|
|
|
prepare_internal_move_to_destination(fr_mm_s); |
|
|
|
} |
|
|
|
|
|
|
|
FORCE_INLINE void move_to(const xyz_pos_t &where, const_float_t de) { move_to(where.x, where.y, where.z, de); } |
|
|
|
void move_to(const xyz_pos_t &where, const_float_t de) { move_to(where.x, where.y, where.z, de); } |
|
|
|
|
|
|
|
void retract_filament(const xyz_pos_t &where) { |
|
|
|
if (!g26_retracted) { // Only retract if we are not already retracted!
|
|
|
|
g26_retracted = true; |
|
|
|
move_to(where, -1.0f * g26_retraction_multiplier); |
|
|
|
} |
|
|
|
} |
|
|
|
typedef struct { |
|
|
|
float extrusion_multiplier = EXTRUSION_MULTIPLIER, |
|
|
|
retraction_multiplier = G26_RETRACT_MULTIPLIER, |
|
|
|
layer_height = MESH_TEST_LAYER_HEIGHT, |
|
|
|
prime_length = PRIME_LENGTH; |
|
|
|
|
|
|
|
// TODO: Parameterize the Z lift with a define
|
|
|
|
void retract_lift_move(const xyz_pos_t &s) { |
|
|
|
retract_filament(destination); |
|
|
|
move_to(current_position.x, current_position.y, current_position.z + 0.5f, 0.0); // Z lift to minimize scraping
|
|
|
|
move_to(s.x, s.y, s.z + 0.5f, 0.0); // Get to the starting point with no extrusion while lifted
|
|
|
|
} |
|
|
|
int16_t bed_temp = MESH_TEST_BED_TEMP, |
|
|
|
hotend_temp = MESH_TEST_HOTEND_TEMP; |
|
|
|
|
|
|
|
float nozzle = MESH_TEST_NOZZLE_SIZE, |
|
|
|
filament_diameter = DEFAULT_NOMINAL_FILAMENT_DIA, |
|
|
|
ooze_amount; // 'O' ... OOZE_AMOUNT
|
|
|
|
|
|
|
|
void recover_filament(const xyz_pos_t &where) { |
|
|
|
if (g26_retracted) { // Only un-retract if we are retracted.
|
|
|
|
move_to(where, 1.2f * g26_retraction_multiplier); |
|
|
|
g26_retracted = false; |
|
|
|
bool continue_with_closest, // 'C'
|
|
|
|
keep_heaters_on; // 'K'
|
|
|
|
|
|
|
|
xy_pos_t xy_pos; // = { 0, 0 }
|
|
|
|
|
|
|
|
int8_t prime_flag = 0; |
|
|
|
|
|
|
|
bool g26_retracted = false; // Track the retracted state during G26 so mismatched
|
|
|
|
// retracts/recovers don't result in a bad state.
|
|
|
|
|
|
|
|
void retract_filament(const xyz_pos_t &where) { |
|
|
|
if (!g26_retracted) { // Only retract if we are not already retracted!
|
|
|
|
g26_retracted = true; |
|
|
|
move_to(where, -1.0f * retraction_multiplier); |
|
|
|
} |
|
|
|
} |
|
|
|
} |
|
|
|
|
|
|
|
/**
|
|
|
|
* print_line_from_here_to_there() takes two cartesian coordinates and draws a line from one |
|
|
|
* to the other. But there are really three sets of coordinates involved. The first coordinate |
|
|
|
* is the present location of the nozzle. We don't necessarily want to print from this location. |
|
|
|
* We first need to move the nozzle to the start of line segment where we want to print. Once |
|
|
|
* there, we can use the two coordinates supplied to draw the line. |
|
|
|
* |
|
|
|
* Note: Although we assume the first set of coordinates is the start of the line and the second |
|
|
|
* set of coordinates is the end of the line, it does not always work out that way. This function |
|
|
|
* optimizes the movement to minimize the travel distance before it can start printing. This saves |
|
|
|
* a lot of time and eliminates a lot of nonsensical movement of the nozzle. However, it does |
|
|
|
* cause a lot of very little short retracement of th nozzle when it draws the very first line |
|
|
|
* segment of a 'circle'. The time this requires is very short and is easily saved by the other |
|
|
|
* cases where the optimization comes into play. |
|
|
|
*/ |
|
|
|
void print_line_from_here_to_there(const xyz_pos_t &s, const xyz_pos_t &e) { |
|
|
|
// TODO: Parameterize the Z lift with a define
|
|
|
|
void retract_lift_move(const xyz_pos_t &s) { |
|
|
|
retract_filament(destination); |
|
|
|
move_to(current_position.x, current_position.y, current_position.z + 0.5f, 0.0f); // Z lift to minimize scraping
|
|
|
|
move_to(s.x, s.y, s.z + 0.5f, 0.0f); // Get to the starting point with no extrusion while lifted
|
|
|
|
} |
|
|
|
|
|
|
|
// Distances to the start / end of the line
|
|
|
|
xy_float_t svec = current_position - s, evec = current_position - e; |
|
|
|
void recover_filament(const xyz_pos_t &where) { |
|
|
|
if (g26_retracted) { // Only un-retract if we are retracted.
|
|
|
|
move_to(where, 1.2f * retraction_multiplier); |
|
|
|
g26_retracted = false; |
|
|
|
} |
|
|
|
} |
|
|
|
|
|
|
|
const float dist_start = HYPOT2(svec.x, svec.y), |
|
|
|
dist_end = HYPOT2(evec.x, evec.y), |
|
|
|
line_length = HYPOT(e.x - s.x, e.y - s.y); |
|
|
|
/**
|
|
|
|
* print_line_from_here_to_there() takes two cartesian coordinates and draws a line from one |
|
|
|
* to the other. But there are really three sets of coordinates involved. The first coordinate |
|
|
|
* is the present location of the nozzle. We don't necessarily want to print from this location. |
|
|
|
* We first need to move the nozzle to the start of line segment where we want to print. Once |
|
|
|
* there, we can use the two coordinates supplied to draw the line. |
|
|
|
* |
|
|
|
* Note: Although we assume the first set of coordinates is the start of the line and the second |
|
|
|
* set of coordinates is the end of the line, it does not always work out that way. This function |
|
|
|
* optimizes the movement to minimize the travel distance before it can start printing. This saves |
|
|
|
* a lot of time and eliminates a lot of nonsensical movement of the nozzle. However, it does |
|
|
|
* cause a lot of very little short retracement of th nozzle when it draws the very first line |
|
|
|
* segment of a 'circle'. The time this requires is very short and is easily saved by the other |
|
|
|
* cases where the optimization comes into play. |
|
|
|
*/ |
|
|
|
void print_line_from_here_to_there(const xyz_pos_t &s, const xyz_pos_t &e) { |
|
|
|
|
|
|
|
// If the end point of the line is closer to the nozzle, flip the direction,
|
|
|
|
// moving from the end to the start. On very small lines the optimization isn't worth it.
|
|
|
|
if (dist_end < dist_start && (INTERSECTION_CIRCLE_RADIUS) < ABS(line_length)) |
|
|
|
return print_line_from_here_to_there(e, s); |
|
|
|
// Distances to the start / end of the line
|
|
|
|
xy_float_t svec = current_position - s, evec = current_position - e; |
|
|
|
|
|
|
|
// Decide whether to retract & lift
|
|
|
|
if (dist_start > 2.0) retract_lift_move(s); |
|
|
|
const float dist_start = HYPOT2(svec.x, svec.y), |
|
|
|
dist_end = HYPOT2(evec.x, evec.y), |
|
|
|
line_length = HYPOT(e.x - s.x, e.y - s.y); |
|
|
|
|
|
|
|
move_to(s, 0.0); // Get to the starting point with no extrusion / un-Z lift
|
|
|
|
// If the end point of the line is closer to the nozzle, flip the direction,
|
|
|
|
// moving from the end to the start. On very small lines the optimization isn't worth it.
|
|
|
|
if (dist_end < dist_start && (INTERSECTION_CIRCLE_RADIUS) < ABS(line_length)) |
|
|
|
return print_line_from_here_to_there(e, s); |
|
|
|
|
|
|
|
const float e_pos_delta = line_length * g26_e_axis_feedrate * g26_extrusion_multiplier; |
|
|
|
// Decide whether to retract & lift
|
|
|
|
if (dist_start > 2.0) retract_lift_move(s); |
|
|
|
|
|
|
|
recover_filament(destination); |
|
|
|
move_to(e, e_pos_delta); // Get to the ending point with an appropriate amount of extrusion
|
|
|
|
} |
|
|
|
move_to(s, 0.0); // Get to the starting point with no extrusion / un-Z lift
|
|
|
|
|
|
|
|
inline bool look_for_lines_to_connect() { |
|
|
|
xyz_pos_t s, e; |
|
|
|
s.z = e.z = g26_layer_height; |
|
|
|
const float e_pos_delta = line_length * g26_e_axis_feedrate * extrusion_multiplier; |
|
|
|
|
|
|
|
GRID_LOOP(i, j) { |
|
|
|
recover_filament(destination); |
|
|
|
move_to(e, e_pos_delta); // Get to the ending point with an appropriate amount of extrusion
|
|
|
|
} |
|
|
|
|
|
|
|
if (TERN0(HAS_LCD_MENU, user_canceled())) return true; |
|
|
|
void connect_neighbor_with_line(const xy_int8_t &p1, int8_t dx, int8_t dy) { |
|
|
|
xy_int8_t p2; |
|
|
|
p2.x = p1.x + dx; |
|
|
|
p2.y = p1.y + dy; |
|
|
|
|
|
|
|
if (p2.x < 0 || p2.x >= (GRID_MAX_POINTS_X)) return; |
|
|
|
if (p2.y < 0 || p2.y >= (GRID_MAX_POINTS_Y)) return; |
|
|
|
|
|
|
|
if(circle_flags.marked(p1.x, p1.y) && circle_flags.marked(p2.x, p2.y)) { |
|
|
|
xyz_pos_t s, e; |
|
|
|
s.x = _GET_MESH_X(p1.x) + (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)) * dx; |
|
|
|
e.x = _GET_MESH_X(p2.x) - (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)) * dx; |
|
|
|
s.y = _GET_MESH_Y(p1.y) + (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)) * dy; |
|
|
|
e.y = _GET_MESH_Y(p2.y) - (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)) * dy; |
|
|
|
s.z = e.z = layer_height; |
|
|
|
|
|
|
|
#if HAS_ENDSTOPS |
|
|
|
LIMIT(s.y, Y_MIN_POS + 1, Y_MAX_POS - 1); |
|
|
|
LIMIT(e.y, Y_MIN_POS + 1, Y_MAX_POS - 1); |
|
|
|
LIMIT(s.x, X_MIN_POS + 1, X_MAX_POS - 1); |
|
|
|
LIMIT(e.x, X_MIN_POS + 1, X_MAX_POS - 1); |
|
|
|
#endif |
|
|
|
|
|
|
|
if (position_is_reachable(s.x, s.y) && position_is_reachable(e.x, e.y)) |
|
|
|
print_line_from_here_to_there(s, e); |
|
|
|
} |
|
|
|
} |
|
|
|
|
|
|
|
if (i < (GRID_MAX_POINTS_X)) { // Can't connect to anything farther to the right than GRID_MAX_POINTS_X.
|
|
|
|
// Already a half circle at the edge of the bed.
|
|
|
|
/**
|
|
|
|
* Turn on the bed and nozzle heat and |
|
|
|
* wait for them to get up to temperature. |
|
|
|
*/ |
|
|
|
bool turn_on_heaters() { |
|
|
|
|
|
|
|
if (circle_flags.marked(i, j) && circle_flags.marked(i + 1, j)) { // Test whether a leftward line can be done
|
|
|
|
if (!horizontal_mesh_line_flags.marked(i, j)) { |
|
|
|
// Two circles need a horizontal line to connect them
|
|
|
|
s.x = _GET_MESH_X( i ) + (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)); // right edge
|
|
|
|
e.x = _GET_MESH_X(i + 1) - (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)); // left edge
|
|
|
|
SERIAL_ECHOLNPGM("Waiting for heatup."); |
|
|
|
|
|
|
|
#if HAS_ENDSTOPS |
|
|
|
LIMIT(s.x, X_MIN_POS + 1, X_MAX_POS - 1); |
|
|
|
s.y = e.y = constrain(_GET_MESH_Y(j), Y_MIN_POS + 1, Y_MAX_POS - 1); |
|
|
|
LIMIT(e.x, X_MIN_POS + 1, X_MAX_POS - 1); |
|
|
|
#else |
|
|
|
s.y = e.y = _GET_MESH_Y(j); |
|
|
|
#endif |
|
|
|
#if HAS_HEATED_BED |
|
|
|
|
|
|
|
if (position_is_reachable(s.x, s.y) && position_is_reachable(e.x, e.y)) |
|
|
|
print_line_from_here_to_there(s, e); |
|
|
|
if (bed_temp > 25) { |
|
|
|
#if HAS_WIRED_LCD |
|
|
|
ui.set_status_P(GET_TEXT(MSG_G26_HEATING_BED), 99); |
|
|
|
ui.quick_feedback(); |
|
|
|
TERN_(HAS_LCD_MENU, ui.capture()); |
|
|
|
#endif |
|
|
|
thermalManager.setTargetBed(bed_temp); |
|
|
|
|
|
|
|
horizontal_mesh_line_flags.mark(i, j); // Mark done, even if skipped
|
|
|
|
} |
|
|
|
// Wait for the temperature to stabilize
|
|
|
|
if (!thermalManager.wait_for_bed(true |
|
|
|
#if G26_CLICK_CAN_CANCEL |
|
|
|
, true |
|
|
|
#endif |
|
|
|
) |
|
|
|
) return G26_ERR; |
|
|
|
} |
|
|
|
|
|
|
|
if (j < (GRID_MAX_POINTS_Y)) { // Can't connect to anything further back than GRID_MAX_POINTS_Y.
|
|
|
|
// Already a half circle at the edge of the bed.
|
|
|
|
|
|
|
|
if (circle_flags.marked(i, j) && circle_flags.marked(i, j + 1)) { // Test whether a downward line can be done
|
|
|
|
if (!vertical_mesh_line_flags.marked(i, j)) { |
|
|
|
// Two circles that need a vertical line to connect them
|
|
|
|
s.y = _GET_MESH_Y( j ) + (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)); // top edge
|
|
|
|
e.y = _GET_MESH_Y(j + 1) - (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)); // bottom edge
|
|
|
|
|
|
|
|
#if HAS_ENDSTOPS |
|
|
|
s.x = e.x = constrain(_GET_MESH_X(i), X_MIN_POS + 1, X_MAX_POS - 1); |
|
|
|
LIMIT(s.y, Y_MIN_POS + 1, Y_MAX_POS - 1); |
|
|
|
LIMIT(e.y, Y_MIN_POS + 1, Y_MAX_POS - 1); |
|
|
|
#else |
|
|
|
s.x = e.x = _GET_MESH_X(i); |
|
|
|
#endif |
|
|
|
#else |
|
|
|
|
|
|
|
if (position_is_reachable(s.x, s.y) && position_is_reachable(e.x, e.y)) |
|
|
|
print_line_from_here_to_there(s, e); |
|
|
|
UNUSED(bed_temp); |
|
|
|
|
|
|
|
vertical_mesh_line_flags.mark(i, j); // Mark done, even if skipped
|
|
|
|
} |
|
|
|
} |
|
|
|
} |
|
|
|
} |
|
|
|
#endif // HAS_HEATED_BED
|
|
|
|
|
|
|
|
// Start heating the active nozzle
|
|
|
|
#if HAS_WIRED_LCD |
|
|
|
ui.set_status_P(GET_TEXT(MSG_G26_HEATING_NOZZLE), 99); |
|
|
|
ui.quick_feedback(); |
|
|
|
#endif |
|
|
|
thermalManager.setTargetHotend(hotend_temp, active_extruder); |
|
|
|
|
|
|
|
// Wait for the temperature to stabilize
|
|
|
|
if (!thermalManager.wait_for_hotend(active_extruder, true |
|
|
|
#if G26_CLICK_CAN_CANCEL |
|
|
|
, true |
|
|
|
#endif |
|
|
|
)) return G26_ERR; |
|
|
|
|
|
|
|
#if HAS_WIRED_LCD |
|
|
|
ui.reset_status(); |
|
|
|
ui.quick_feedback(); |
|
|
|
#endif |
|
|
|
|
|
|
|
return G26_OK; |
|
|
|
} |
|
|
|
return false; |
|
|
|
} |
|
|
|
|
|
|
|
/**
|
|
|
|
* Turn on the bed and nozzle heat and |
|
|
|
* wait for them to get up to temperature. |
|
|
|
*/ |
|
|
|
inline bool turn_on_heaters() { |
|
|
|
/**
|
|
|
|
* Prime the nozzle if needed. Return true on error. |
|
|
|
*/ |
|
|
|
bool prime_nozzle() { |
|
|
|
|
|
|
|
SERIAL_ECHOLNPGM("Waiting for heatup."); |
|
|
|
const feedRate_t fr_slow_e = planner.settings.max_feedrate_mm_s[E_AXIS] / 15.0f; |
|
|
|
#if HAS_LCD_MENU && !HAS_TOUCH_BUTTONS // ui.button_pressed issue with touchscreen
|
|
|
|
#if ENABLED(PREVENT_LENGTHY_EXTRUDE) |
|
|
|
float Total_Prime = 0.0; |
|
|
|
#endif |
|
|
|
|
|
|
|
#if HAS_HEATED_BED |
|
|
|
if (prime_flag == -1) { // The user wants to control how much filament gets purged
|
|
|
|
ui.capture(); |
|
|
|
ui.set_status_P(GET_TEXT(MSG_G26_MANUAL_PRIME), 99); |
|
|
|
ui.chirp(); |
|
|
|
|
|
|
|
if (g26_bed_temp > 25) { |
|
|
|
destination = current_position; |
|
|
|
|
|
|
|
recover_filament(destination); // Make sure G26 doesn't think the filament is retracted().
|
|
|
|
|
|
|
|
while (!ui.button_pressed()) { |
|
|
|
ui.chirp(); |
|
|
|
destination.e += 0.25; |
|
|
|
#if ENABLED(PREVENT_LENGTHY_EXTRUDE) |
|
|
|
Total_Prime += 0.25; |
|
|
|
if (Total_Prime >= EXTRUDE_MAXLENGTH) { |
|
|
|
ui.release(); |
|
|
|
return G26_ERR; |
|
|
|
} |
|
|
|
#endif |
|
|
|
prepare_internal_move_to_destination(fr_slow_e); |
|
|
|
destination = current_position; |
|
|
|
planner.synchronize(); // Without this synchronize, the purge is more consistent,
|
|
|
|
// but because the planner has a buffer, we won't be able
|
|
|
|
// to stop as quickly. So we put up with the less smooth
|
|
|
|
// action to give the user a more responsive 'Stop'.
|
|
|
|
} |
|
|
|
|
|
|
|
ui.wait_for_release(); |
|
|
|
|
|
|
|
ui.set_status_P(GET_TEXT(MSG_G26_PRIME_DONE), 99); |
|
|
|
ui.quick_feedback(); |
|
|
|
ui.release(); |
|
|
|
} |
|
|
|
else |
|
|
|
#endif |
|
|
|
{ |
|
|
|
#if HAS_WIRED_LCD |
|
|
|
ui.set_status_P(GET_TEXT(MSG_G26_HEATING_BED), 99); |
|
|
|
ui.set_status_P(GET_TEXT(MSG_G26_FIXED_LENGTH), 99); |
|
|
|
ui.quick_feedback(); |
|
|
|
TERN_(HAS_LCD_MENU, ui.capture()); |
|
|
|
#endif |
|
|
|
thermalManager.setTargetBed(g26_bed_temp); |
|
|
|
|
|
|
|
// Wait for the temperature to stabilize
|
|
|
|
if (!thermalManager.wait_for_bed(true |
|
|
|
#if G26_CLICK_CAN_CANCEL |
|
|
|
, true |
|
|
|
#endif |
|
|
|
) |
|
|
|
) return G26_ERR; |
|
|
|
destination = current_position; |
|
|
|
destination.e += prime_length; |
|
|
|
prepare_internal_move_to_destination(fr_slow_e); |
|
|
|
destination.e -= prime_length; |
|
|
|
retract_filament(destination); |
|
|
|
} |
|
|
|
|
|
|
|
#endif // HAS_HEATED_BED
|
|
|
|
return G26_OK; |
|
|
|
} |
|
|
|
|
|
|
|
// Start heating the active nozzle
|
|
|
|
#if HAS_WIRED_LCD |
|
|
|
ui.set_status_P(GET_TEXT(MSG_G26_HEATING_NOZZLE), 99); |
|
|
|
ui.quick_feedback(); |
|
|
|
#endif |
|
|
|
thermalManager.setTargetHotend(g26_hotend_temp, active_extruder); |
|
|
|
/**
|
|
|
|
* Find the nearest point at which to print a circle |
|
|
|
*/ |
|
|
|
mesh_index_pair find_closest_circle_to_print(const xy_pos_t &pos) { |
|
|
|
|
|
|
|
// Wait for the temperature to stabilize
|
|
|
|
if (!thermalManager.wait_for_hotend(active_extruder, true |
|
|
|
#if G26_CLICK_CAN_CANCEL |
|
|
|
, true |
|
|
|
#endif |
|
|
|
)) return G26_ERR; |
|
|
|
mesh_index_pair out_point; |
|
|
|
out_point.pos = -1; |
|
|
|
|
|
|
|
#if HAS_WIRED_LCD |
|
|
|
ui.reset_status(); |
|
|
|
ui.quick_feedback(); |
|
|
|
#endif |
|
|
|
#if ENABLED(UBL_HILBERT_CURVE) |
|
|
|
|
|
|
|
return G26_OK; |
|
|
|
} |
|
|
|
auto test_func = [](uint8_t i, uint8_t j, void *data) -> bool { |
|
|
|
if (!circle_flags.marked(i, j)) { |
|
|
|
mesh_index_pair *out_point = (mesh_index_pair*)data; |
|
|
|
out_point->pos.set(i, j); // Save its data
|
|
|
|
return true; |
|
|
|
} |
|
|
|
return false; |
|
|
|
}; |
|
|
|
|
|
|
|
/**
|
|
|
|
* Prime the nozzle if needed. Return true on error. |
|
|
|
*/ |
|
|
|
inline bool prime_nozzle() { |
|
|
|
hilbert_curve::search_from_closest(pos, test_func, &out_point); |
|
|
|
|
|
|
|
const feedRate_t fr_slow_e = planner.settings.max_feedrate_mm_s[E_AXIS] / 15.0f; |
|
|
|
#if HAS_LCD_MENU && !HAS_TOUCH_BUTTONS // ui.button_pressed issue with touchscreen
|
|
|
|
#if ENABLED(PREVENT_LENGTHY_EXTRUDE) |
|
|
|
float Total_Prime = 0.0; |
|
|
|
#endif |
|
|
|
#else |
|
|
|
|
|
|
|
if (g26_prime_flag == -1) { // The user wants to control how much filament gets purged
|
|
|
|
ui.capture(); |
|
|
|
ui.set_status_P(GET_TEXT(MSG_G26_MANUAL_PRIME), 99); |
|
|
|
ui.chirp(); |
|
|
|
float closest = 99999.99; |
|
|
|
|
|
|
|
destination = current_position; |
|
|
|
GRID_LOOP(i, j) { |
|
|
|
if (!circle_flags.marked(i, j)) { |
|
|
|
// We found a circle that needs to be printed
|
|
|
|
const xy_pos_t m = { _GET_MESH_X(i), _GET_MESH_Y(j) }; |
|
|
|
|
|
|
|
recover_filament(destination); // Make sure G26 doesn't think the filament is retracted().
|
|
|
|
// Get the distance to this intersection
|
|
|
|
float f = (pos - m).magnitude(); |
|
|
|
|
|
|
|
while (!ui.button_pressed()) { |
|
|
|
ui.chirp(); |
|
|
|
destination.e += 0.25; |
|
|
|
#if ENABLED(PREVENT_LENGTHY_EXTRUDE) |
|
|
|
Total_Prime += 0.25; |
|
|
|
if (Total_Prime >= EXTRUDE_MAXLENGTH) { |
|
|
|
ui.release(); |
|
|
|
return G26_ERR; |
|
|
|
// It is possible that we are being called with the values
|
|
|
|
// to let us find the closest circle to the start position.
|
|
|
|
// But if this is not the case, add a small weighting to the
|
|
|
|
// distance calculation to help it choose a better place to continue.
|
|
|
|
f += (xy_pos - m).magnitude() / 15.0f; |
|
|
|
|
|
|
|
// Add the specified amount of Random Noise to our search
|
|
|
|
if (g26_random_deviation > 1.0) f += random(0.0, g26_random_deviation); |
|
|
|
|
|
|
|
if (f < closest) { |
|
|
|
closest = f; // Found a closer un-printed location
|
|
|
|
out_point.pos.set(i, j); // Save its data
|
|
|
|
out_point.distance = closest; |
|
|
|
} |
|
|
|
#endif |
|
|
|
prepare_internal_move_to_destination(fr_slow_e); |
|
|
|
destination = current_position; |
|
|
|
planner.synchronize(); // Without this synchronize, the purge is more consistent,
|
|
|
|
// but because the planner has a buffer, we won't be able
|
|
|
|
// to stop as quickly. So we put up with the less smooth
|
|
|
|
// action to give the user a more responsive 'Stop'.
|
|
|
|
} |
|
|
|
} |
|
|
|
|
|
|
|
ui.wait_for_release(); |
|
|
|
|
|
|
|
ui.set_status_P(GET_TEXT(MSG_G26_PRIME_DONE), 99); |
|
|
|
ui.quick_feedback(); |
|
|
|
ui.release(); |
|
|
|
} |
|
|
|
else |
|
|
|
#endif |
|
|
|
{ |
|
|
|
#if HAS_WIRED_LCD |
|
|
|
ui.set_status_P(GET_TEXT(MSG_G26_FIXED_LENGTH), 99); |
|
|
|
ui.quick_feedback(); |
|
|
|
#endif |
|
|
|
destination = current_position; |
|
|
|
destination.e += g26_prime_length; |
|
|
|
prepare_internal_move_to_destination(fr_slow_e); |
|
|
|
destination.e -= g26_prime_length; |
|
|
|
retract_filament(destination); |
|
|
|
|
|
|
|
circle_flags.mark(out_point); // Mark this location as done.
|
|
|
|
return out_point; |
|
|
|
} |
|
|
|
|
|
|
|
return G26_OK; |
|
|
|
} |
|
|
|
} g26_helper_t; |
|
|
|
|
|
|
|
/**
|
|
|
|
* G26: Mesh Validation Pattern generation. |
|
|
|
@ -510,20 +516,11 @@ void GcodeSuite::G26() { |
|
|
|
// Change the tool first, if specified
|
|
|
|
if (parser.seenval('T')) tool_change(parser.value_int()); |
|
|
|
|
|
|
|
g26_extrusion_multiplier = EXTRUSION_MULTIPLIER; |
|
|
|
g26_retraction_multiplier = G26_RETRACT_MULTIPLIER; |
|
|
|
g26_layer_height = MESH_TEST_LAYER_HEIGHT; |
|
|
|
g26_prime_length = PRIME_LENGTH; |
|
|
|
g26_bed_temp = MESH_TEST_BED_TEMP; |
|
|
|
g26_hotend_temp = MESH_TEST_HOTEND_TEMP; |
|
|
|
g26_prime_flag = 0; |
|
|
|
|
|
|
|
float g26_nozzle = MESH_TEST_NOZZLE_SIZE, |
|
|
|
g26_filament_diameter = DEFAULT_NOMINAL_FILAMENT_DIA, |
|
|
|
g26_ooze_amount = parser.linearval('O', OOZE_AMOUNT); |
|
|
|
g26_helper_t g26; |
|
|
|
|
|
|
|
bool g26_continue_with_closest = parser.boolval('C'), |
|
|
|
g26_keep_heaters_on = parser.boolval('K'); |
|
|
|
g26.ooze_amount = parser.linearval('O', OOZE_AMOUNT); |
|
|
|
g26.continue_with_closest = parser.boolval('C'); |
|
|
|
g26.keep_heaters_on = parser.boolval('K'); |
|
|
|
|
|
|
|
// Accept 'I' if temperature presets are defined
|
|
|
|
#if PREHEAT_COUNT |
|
|
|
@ -548,14 +545,14 @@ void GcodeSuite::G26() { |
|
|
|
SERIAL_ECHOLNPAIR("?Specified bed temperature not plausible (40-", BED_MAX_TARGET, "C)."); |
|
|
|
return; |
|
|
|
} |
|
|
|
g26_bed_temp = bedtemp; |
|
|
|
g26.bed_temp = bedtemp; |
|
|
|
} |
|
|
|
|
|
|
|
#endif // HAS_HEATED_BED
|
|
|
|
|
|
|
|
if (parser.seenval('L')) { |
|
|
|
g26_layer_height = parser.value_linear_units(); |
|
|
|
if (!WITHIN(g26_layer_height, 0.0, 2.0)) { |
|
|
|
g26.layer_height = parser.value_linear_units(); |
|
|
|
if (!WITHIN(g26.layer_height, 0.0, 2.0)) { |
|
|
|
SERIAL_ECHOLNPGM("?Specified layer height not plausible."); |
|
|
|
return; |
|
|
|
} |
|
|
|
@ -563,8 +560,8 @@ void GcodeSuite::G26() { |
|
|
|
|
|
|
|
if (parser.seen('Q')) { |
|
|
|
if (parser.has_value()) { |
|
|
|
g26_retraction_multiplier = parser.value_float(); |
|
|
|
if (!WITHIN(g26_retraction_multiplier, 0.05, 15.0)) { |
|
|
|
g26.retraction_multiplier = parser.value_float(); |
|
|
|
if (!WITHIN(g26.retraction_multiplier, 0.05, 15.0)) { |
|
|
|
SERIAL_ECHOLNPGM("?Specified Retraction Multiplier not plausible."); |
|
|
|
return; |
|
|
|
} |
|
|
|
@ -576,8 +573,8 @@ void GcodeSuite::G26() { |
|
|
|
} |
|
|
|
|
|
|
|
if (parser.seenval('S')) { |
|
|
|
g26_nozzle = parser.value_float(); |
|
|
|
if (!WITHIN(g26_nozzle, 0.1, 2.0)) { |
|
|
|
g26.nozzle = parser.value_float(); |
|
|
|
if (!WITHIN(g26.nozzle, 0.1, 2.0)) { |
|
|
|
SERIAL_ECHOLNPGM("?Specified nozzle size not plausible."); |
|
|
|
return; |
|
|
|
} |
|
|
|
@ -586,16 +583,16 @@ void GcodeSuite::G26() { |
|
|
|
if (parser.seen('P')) { |
|
|
|
if (!parser.has_value()) { |
|
|
|
#if HAS_LCD_MENU |
|
|
|
g26_prime_flag = -1; |
|
|
|
g26.prime_flag = -1; |
|
|
|
#else |
|
|
|
SERIAL_ECHOLNPGM("?Prime length must be specified when not using an LCD."); |
|
|
|
return; |
|
|
|
#endif |
|
|
|
} |
|
|
|
else { |
|
|
|
g26_prime_flag++; |
|
|
|
g26_prime_length = parser.value_linear_units(); |
|
|
|
if (!WITHIN(g26_prime_length, 0.0, 25.0)) { |
|
|
|
g26.prime_flag++; |
|
|
|
g26.prime_length = parser.value_linear_units(); |
|
|
|
if (!WITHIN(g26.prime_length, 0.0, 25.0)) { |
|
|
|
SERIAL_ECHOLNPGM("?Specified prime length not plausible."); |
|
|
|
return; |
|
|
|
} |
|
|
|
@ -603,17 +600,17 @@ void GcodeSuite::G26() { |
|
|
|
} |
|
|
|
|
|
|
|
if (parser.seenval('F')) { |
|
|
|
g26_filament_diameter = parser.value_linear_units(); |
|
|
|
if (!WITHIN(g26_filament_diameter, 1.0, 4.0)) { |
|
|
|
g26.filament_diameter = parser.value_linear_units(); |
|
|
|
if (!WITHIN(g26.filament_diameter, 1.0, 4.0)) { |
|
|
|
SERIAL_ECHOLNPGM("?Specified filament size not plausible."); |
|
|
|
return; |
|
|
|
} |
|
|
|
} |
|
|
|
g26_extrusion_multiplier *= sq(1.75) / sq(g26_filament_diameter); // If we aren't using 1.75mm filament, we need to
|
|
|
|
g26.extrusion_multiplier *= sq(1.75) / sq(g26.filament_diameter); // If we aren't using 1.75mm filament, we need to
|
|
|
|
// scale up or down the length needed to get the
|
|
|
|
// same volume of filament
|
|
|
|
|
|
|
|
g26_extrusion_multiplier *= g26_filament_diameter * sq(g26_nozzle) / sq(0.3); // Scale up by nozzle size
|
|
|
|
g26.extrusion_multiplier *= g26.filament_diameter * sq(g26.nozzle) / sq(0.3); // Scale up by nozzle size
|
|
|
|
|
|
|
|
// Get a temperature from 'I' or 'H'
|
|
|
|
celsius_t noztemp = 0; |
|
|
|
@ -632,7 +629,7 @@ void GcodeSuite::G26() { |
|
|
|
SERIAL_ECHOLNPGM("?Specified nozzle temperature not plausible."); |
|
|
|
return; |
|
|
|
} |
|
|
|
g26_hotend_temp = noztemp; |
|
|
|
g26.hotend_temp = noztemp; |
|
|
|
} |
|
|
|
|
|
|
|
// 'U' to Randomize and optionally set circle deviation
|
|
|
|
@ -660,9 +657,9 @@ void GcodeSuite::G26() { |
|
|
|
} |
|
|
|
|
|
|
|
// Set a position with 'X' and/or 'Y'. Default: current_position
|
|
|
|
g26_xy_pos.set(parser.seenval('X') ? RAW_X_POSITION(parser.value_linear_units()) : current_position.x, |
|
|
|
g26.xy_pos.set(parser.seenval('X') ? RAW_X_POSITION(parser.value_linear_units()) : current_position.x, |
|
|
|
parser.seenval('Y') ? RAW_Y_POSITION(parser.value_linear_units()) : current_position.y); |
|
|
|
if (!position_is_reachable(g26_xy_pos)) { |
|
|
|
if (!position_is_reachable(g26.xy_pos)) { |
|
|
|
SERIAL_ECHOLNPGM("?Specified X,Y coordinate out of bounds."); |
|
|
|
return; |
|
|
|
} |
|
|
|
@ -680,12 +677,12 @@ void GcodeSuite::G26() { |
|
|
|
planner.calculate_volumetric_multipliers(); |
|
|
|
#endif |
|
|
|
|
|
|
|
if (turn_on_heaters() != G26_OK) goto LEAVE; |
|
|
|
if (g26.turn_on_heaters() != G26_OK) goto LEAVE; |
|
|
|
|
|
|
|
current_position.e = 0.0; |
|
|
|
sync_plan_position_e(); |
|
|
|
|
|
|
|
if (g26_prime_flag && prime_nozzle() != G26_OK) goto LEAVE; |
|
|
|
if (g26.prime_flag && g26.prime_nozzle() != G26_OK) goto LEAVE; |
|
|
|
|
|
|
|
/**
|
|
|
|
* Bed is preheated |
|
|
|
@ -698,14 +695,12 @@ void GcodeSuite::G26() { |
|
|
|
*/ |
|
|
|
|
|
|
|
circle_flags.reset(); |
|
|
|
horizontal_mesh_line_flags.reset(); |
|
|
|
vertical_mesh_line_flags.reset(); |
|
|
|
|
|
|
|
// Move nozzle to the specified height for the first layer
|
|
|
|
destination = current_position; |
|
|
|
destination.z = g26_layer_height; |
|
|
|
destination.z = g26.layer_height; |
|
|
|
move_to(destination, 0.0); |
|
|
|
move_to(destination, g26_ooze_amount); |
|
|
|
move_to(destination, g26.ooze_amount); |
|
|
|
|
|
|
|
TERN_(HAS_LCD_MENU, ui.capture()); |
|
|
|
|
|
|
|
@ -732,7 +727,7 @@ void GcodeSuite::G26() { |
|
|
|
mesh_index_pair location; |
|
|
|
do { |
|
|
|
// Find the nearest confluence
|
|
|
|
location = find_closest_circle_to_print(g26_continue_with_closest ? xy_pos_t(current_position) : g26_xy_pos); |
|
|
|
location = g26.find_closest_circle_to_print(g26.continue_with_closest ? xy_pos_t(current_position) : g26.xy_pos); |
|
|
|
|
|
|
|
if (location.valid()) { |
|
|
|
const xy_pos_t circle = _GET_MESH_POS(location.pos); |
|
|
|
@ -762,7 +757,7 @@ void GcodeSuite::G26() { |
|
|
|
if (!b) { e.x = circle.x; e.y += INTERSECTION_CIRCLE_RADIUS; } |
|
|
|
arc_length = (f || b) ? ARC_LENGTH(1) : ARC_LENGTH(2); |
|
|
|
} |
|
|
|
else if (r) { // right edge
|
|
|
|
else if (r) { // right edge
|
|
|
|
if (b) s.set(circle.x - (INTERSECTION_CIRCLE_RADIUS), circle.y); |
|
|
|
else s.set(circle.x, circle.y + INTERSECTION_CIRCLE_RADIUS); |
|
|
|
if (f) e.set(circle.x - (INTERSECTION_CIRCLE_RADIUS), circle.y); |
|
|
|
@ -782,25 +777,24 @@ void GcodeSuite::G26() { |
|
|
|
const xy_float_t dist = current_position - s; // Distance from the start of the actual circle
|
|
|
|
const float dist_start = HYPOT2(dist.x, dist.y); |
|
|
|
const xyze_pos_t endpoint = { |
|
|
|
e.x, e.y, g26_layer_height, |
|
|
|
current_position.e + (arc_length * g26_e_axis_feedrate * g26_extrusion_multiplier) |
|
|
|
e.x, e.y, g26.layer_height, |
|
|
|
current_position.e + (arc_length * g26_e_axis_feedrate * g26.extrusion_multiplier) |
|
|
|
}; |
|
|
|
|
|
|
|
if (dist_start > 2.0) { |
|
|
|
s.z = g26_layer_height + 0.5f; |
|
|
|
retract_lift_move(s); |
|
|
|
s.z = g26.layer_height + 0.5f; |
|
|
|
g26.retract_lift_move(s); |
|
|
|
} |
|
|
|
|
|
|
|
s.z = g26_layer_height; |
|
|
|
s.z = g26.layer_height; |
|
|
|
move_to(s, 0.0); // Get to the starting point with no extrusion / un-Z lift
|
|
|
|
|
|
|
|
recover_filament(destination); |
|
|
|
g26.recover_filament(destination); |
|
|
|
|
|
|
|
const feedRate_t old_feedrate = feedrate_mm_s; |
|
|
|
feedrate_mm_s = PLANNER_XY_FEEDRATE() * 0.1f; |
|
|
|
plan_arc(endpoint, arc_offset, false, 0); // Draw a counter-clockwise arc
|
|
|
|
feedrate_mm_s = old_feedrate; |
|
|
|
destination = current_position; |
|
|
|
{ REMEMBER(fr, feedrate_mm_s, PLANNER_XY_FEEDRATE() * 0.1f); |
|
|
|
plan_arc(endpoint, arc_offset, false, 0); // Draw a counter-clockwise arc
|
|
|
|
destination = current_position; |
|
|
|
} |
|
|
|
|
|
|
|
if (TERN0(HAS_LCD_MENU, user_canceled())) goto LEAVE; // Check if the user wants to stop the Mesh Validation
|
|
|
|
|
|
|
|
@ -828,8 +822,8 @@ void GcodeSuite::G26() { |
|
|
|
|
|
|
|
if (TERN0(HAS_LCD_MENU, user_canceled())) goto LEAVE; // Check if the user wants to stop the Mesh Validation
|
|
|
|
|
|
|
|
xyz_float_t p = { circle.x + _COS(ind ), circle.y + _SIN(ind ), g26_layer_height }, |
|
|
|
q = { circle.x + _COS(ind + 1), circle.y + _SIN(ind + 1), g26_layer_height }; |
|
|
|
xyz_float_t p = { circle.x + _COS(ind ), circle.y + _SIN(ind ), g26.layer_height }, |
|
|
|
q = { circle.x + _COS(ind + 1), circle.y + _SIN(ind + 1), g26.layer_height }; |
|
|
|
|
|
|
|
#if IS_KINEMATIC |
|
|
|
// Check to make sure this segment is entirely on the bed, skip if not.
|
|
|
|
@ -841,13 +835,17 @@ void GcodeSuite::G26() { |
|
|
|
LIMIT(q.y, Y_MIN_POS + 1, Y_MAX_POS - 1); |
|
|
|
#endif |
|
|
|
|
|
|
|
print_line_from_here_to_there(p, q); |
|
|
|
g26.print_line_from_here_to_there(p, q); |
|
|
|
SERIAL_FLUSH(); // Prevent host M105 buffer overrun.
|
|
|
|
} |
|
|
|
|
|
|
|
#endif // !ARC_SUPPORT
|
|
|
|
|
|
|
|
if (look_for_lines_to_connect()) goto LEAVE; |
|
|
|
g26.connect_neighbor_with_line(location.pos, -1, 0); |
|
|
|
g26.connect_neighbor_with_line(location.pos, 1, 0); |
|
|
|
g26.connect_neighbor_with_line(location.pos, 0, -1); |
|
|
|
g26.connect_neighbor_with_line(location.pos, 0, 1); |
|
|
|
if (TERN0(HAS_LCD_MENU, user_canceled())) goto LEAVE; |
|
|
|
} |
|
|
|
|
|
|
|
SERIAL_FLUSH(); // Prevent host M105 buffer overrun.
|
|
|
|
@ -857,12 +855,9 @@ void GcodeSuite::G26() { |
|
|
|
LEAVE: |
|
|
|
ui.set_status_P(GET_TEXT(MSG_G26_LEAVING), -1); |
|
|
|
|
|
|
|
retract_filament(destination); |
|
|
|
g26.retract_filament(destination); |
|
|
|
destination.z = Z_CLEARANCE_BETWEEN_PROBES; |
|
|
|
move_to(destination, 0); // Raise the nozzle
|
|
|
|
|
|
|
|
destination = g26_xy_pos; // Move back to the starting XY position
|
|
|
|
move_to(destination, 0); // Move back to the starting position
|
|
|
|
move_to(destination, 0); // Raise the nozzle
|
|
|
|
|
|
|
|
#if DISABLED(NO_VOLUMETRICS) |
|
|
|
parser.volumetric_enabled = volumetric_was_enabled; |
|
|
|
@ -871,7 +866,7 @@ void GcodeSuite::G26() { |
|
|
|
|
|
|
|
TERN_(HAS_LCD_MENU, ui.release()); // Give back control of the LCD
|
|
|
|
|
|
|
|
if (!g26_keep_heaters_on) { |
|
|
|
if (!g26.keep_heaters_on) { |
|
|
|
TERN_(HAS_HEATED_BED, thermalManager.setTargetBed(0)); |
|
|
|
thermalManager.setTargetHotend(active_extruder, 0); |
|
|
|
} |
|
|
|
|
Marcio T
3 years ago
GitHub