committed by
Scott Lahteine
9 changed files with 142 additions and 378 deletions
@ -0,0 +1,71 @@ |
|||||
|
/**
|
||||
|
* Marlin 3D Printer Firmware |
||||
|
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
|
* |
||||
|
* Based on Sprinter and grbl. |
||||
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm |
||||
|
* |
||||
|
* This program is free software: you can redistribute it and/or modify |
||||
|
* it under the terms of the GNU General Public License as published by |
||||
|
* the Free Software Foundation, either version 3 of the License, or |
||||
|
* (at your option) any later version. |
||||
|
* |
||||
|
* This program is distributed in the hope that it will be useful, |
||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
* GNU General Public License for more details. |
||||
|
* |
||||
|
* You should have received a copy of the GNU General Public License |
||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
* |
||||
|
*/ |
||||
|
|
||||
|
/**
|
||||
|
* HAL_LPC1768/include/i2c_util.c |
||||
|
*/ |
||||
|
|
||||
|
#ifdef TARGET_LPC1768 |
||||
|
|
||||
|
#include "../../../inc/MarlinConfigPre.h" |
||||
|
#include "i2c_util.h" |
||||
|
|
||||
|
#define U8G_I2C_OPT_FAST 16 // from u8g.h
|
||||
|
|
||||
|
#ifdef __cplusplus |
||||
|
extern "C" { |
||||
|
#endif |
||||
|
|
||||
|
void configure_i2c(const uint8_t clock_option) { |
||||
|
/**
|
||||
|
* Init I2C pin connect |
||||
|
*/ |
||||
|
PINSEL_CFG_Type PinCfg; |
||||
|
PinCfg.OpenDrain = 0; |
||||
|
PinCfg.Pinmode = 0; |
||||
|
PinCfg.Portnum = 0; |
||||
|
#if USEDI2CDEV_M == 0 |
||||
|
PinCfg.Funcnum = 1; |
||||
|
PinCfg.Pinnum = 27; // SDA0 / D57 AUX-1 ... SCL0 / D58 AUX-1
|
||||
|
#elif USEDI2CDEV_M == 1 |
||||
|
PinCfg.Funcnum = 3; |
||||
|
PinCfg.Pinnum = 0; // SDA1 / D20 SCA ... SCL1 / D21 SCL
|
||||
|
#elif USEDI2CDEV_M == 2 |
||||
|
PinCfg.Funcnum = 2; |
||||
|
PinCfg.Pinnum = 10; // SDA2 / D38 X_ENABLE_PIN ... SCL2 / D55 X_DIR_PIN
|
||||
|
#endif |
||||
|
PINSEL_ConfigPin(&PinCfg); |
||||
|
PinCfg.Pinnum += 1; |
||||
|
PINSEL_ConfigPin(&PinCfg); |
||||
|
|
||||
|
// Initialize I2C peripheral
|
||||
|
I2C_Init(I2CDEV_M, (clock_option & U8G_I2C_OPT_FAST) ? 400000: 100000); // LCD data rates
|
||||
|
|
||||
|
// Enable Master I2C operation
|
||||
|
I2C_Cmd(I2CDEV_M, I2C_MASTER_MODE, ENABLE); |
||||
|
} |
||||
|
|
||||
|
#ifdef __cplusplus |
||||
|
} |
||||
|
#endif |
||||
|
|
||||
|
#endif // TARGET_LPC1768
|
@ -0,0 +1,46 @@ |
|||||
|
/**
|
||||
|
* Marlin 3D Printer Firmware |
||||
|
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
|
* |
||||
|
* Based on Sprinter and grbl. |
||||
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm |
||||
|
* |
||||
|
* This program is free software: you can redistribute it and/or modify |
||||
|
* it under the terms of the GNU General Public License as published by |
||||
|
* the Free Software Foundation, either version 3 of the License, or |
||||
|
* (at your option) any later version. |
||||
|
* |
||||
|
* This program is distributed in the hope that it will be useful, |
||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
* GNU General Public License for more details. |
||||
|
* |
||||
|
* You should have received a copy of the GNU General Public License |
||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
* |
||||
|
*/ |
||||
|
#pragma once |
||||
|
|
||||
|
/**
|
||||
|
* HAL_LPC1768/include/i2c_util.h |
||||
|
*/ |
||||
|
|
||||
|
#ifndef USEDI2CDEV_M |
||||
|
#define USEDI2CDEV_M 1 // By default use I2C1 controller
|
||||
|
#endif |
||||
|
|
||||
|
#if USEDI2CDEV_M == 0 |
||||
|
#define I2CDEV_M LPC_I2C0 |
||||
|
#elif USEDI2CDEV_M == 1 |
||||
|
#define I2CDEV_M LPC_I2C1 |
||||
|
#elif USEDI2CDEV_M == 2 |
||||
|
#define I2CDEV_M LPC_I2C2 |
||||
|
#else |
||||
|
#error "Master I2C device not defined!" |
||||
|
#endif |
||||
|
|
||||
|
#include <lpc17xx_i2c.h> |
||||
|
#include <lpc17xx_pinsel.h> |
||||
|
#include <lpc17xx_libcfg_default.h> |
||||
|
|
||||
|
void configure_i2c(const uint8_t clock_option); |
@ -1,254 +0,0 @@ |
|||||
/** |
|
||||
* Marlin 3D Printer Firmware |
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] |
|
||||
* |
|
||||
* Based on Sprinter and grbl. |
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm |
|
||||
* |
|
||||
* This program is free software: you can redistribute it and/or modify |
|
||||
* it under the terms of the GNU General Public License as published by |
|
||||
* the Free Software Foundation, either version 3 of the License, or |
|
||||
* (at your option) any later version. |
|
||||
* |
|
||||
* This program is distributed in the hope that it will be useful, |
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
|
||||
* GNU General Public License for more details. |
|
||||
* |
|
||||
* You should have received a copy of the GNU General Public License |
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. |
|
||||
* |
|
||||
*/ |
|
||||
|
|
||||
/** |
|
||||
* Based on U8G2 code - u8x8_byte.c |
|
||||
* |
|
||||
* Universal 8bit Graphics Library (https://github.com/olikraus/u8g2/) |
|
||||
* |
|
||||
* Copyright (c) 2016, olikraus@gmail.com |
|
||||
* All rights reserved. |
|
||||
* |
|
||||
* Redistribution and use in source and binary forms, with or without modification, |
|
||||
* are permitted provided that the following conditions are met: |
|
||||
* |
|
||||
* * Redistributions of source code must retain the above copyright notice, this list |
|
||||
* of conditions and the following disclaimer. |
|
||||
* |
|
||||
* * Redistributions in binary form must reproduce the above copyright notice, this |
|
||||
* list of conditions and the following disclaimer in the documentation and/or other |
|
||||
* materials provided with the distribution. |
|
||||
* |
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND |
|
||||
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, |
|
||||
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
|
||||
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR |
|
||||
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
|
||||
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF |
|
||||
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
|
||||
*/ |
|
||||
|
|
||||
/** |
|
||||
* Software i2c, |
|
||||
* ignores ACK response (which is anyway not provided by some displays) |
|
||||
* also does not allow reading from the device |
|
||||
*/ |
|
||||
|
|
||||
#ifdef TARGET_LPC1768 |
|
||||
|
|
||||
#include "../../inc/MarlinConfigPre.h" |
|
||||
|
|
||||
#if HAS_GRAPHICAL_LCD |
|
||||
|
|
||||
#include <U8glib.h> |
|
||||
|
|
||||
//void pinMode(int16_t pin, uint8_t mode); |
|
||||
//void digitalWrite(int16_t pin, uint8_t pin_status); |
|
||||
|
|
||||
|
|
||||
#define I2C_SLA (0x3C*2) |
|
||||
//#define I2C_CMD_MODE 0x080 |
|
||||
#define I2C_CMD_MODE 0x000 |
|
||||
#define I2C_DATA_MODE 0x040 |
|
||||
|
|
||||
//static uint8_t I2C_speed; // 3 - 400KHz, 13 - 100KHz |
|
||||
//#define SPEED_400KHz 3 |
|
||||
//#define SPEED_100KHz 13 |
|
||||
|
|
||||
// #define U8G_I2C_OPT_FAST 16 |
|
||||
|
|
||||
uint8_t SCL_pin_HAL_LPC1768_sw_I2C, SCL_port_HAL_LPC1768_sw_I2C, SDA_pin_HAL_LPC1768_sw_I2C, SDA_port_HAL_LPC1768_sw_I2C; |
|
||||
|
|
||||
#define SPI_SPEED 2 //20: 200KHz 5:750KHz 2:3-4MHz |
|
||||
|
|
||||
uint8_t u8g_i2c_send_byte_sw(uint8_t data) { |
|
||||
for (uint8_t i = 0; i < 9; i++) { // 1 extra bit for the ack/nak |
|
||||
|
|
||||
if (val & 0x80) |
|
||||
for (uint8_t j = 0; j < SPI_SPEED; j++) { |
|
||||
LPC_GPIO(SDA_port_HAL_LPC1768_sw_I2C)->FIOSET = LPC_PIN(SDA_pin_HAL_LPC1768_sw_I2C); |
|
||||
LPC_GPIO(SDA_port_HAL_LPC1768_sw_I2C)->FIOSET = LPC_PIN(SDA_pin_HAL_LPC1768_sw_I2C); |
|
||||
LPC_GPIO(SDA_port_HAL_LPC1768_sw_I2C)->FIOSET = LPC_PIN(SDA_pin_HAL_LPC1768_sw_I2C); |
|
||||
} |
|
||||
else |
|
||||
for (uint8_t j = 0; j < SPI_SPEED; j++) { |
|
||||
LPC_GPIO(SDA_port_HAL_LPC1768_sw_I2C)->FIOCLR = LPC_PIN(SDA_pin_HAL_LPC1768_sw_I2C); |
|
||||
LPC_GPIO(SDA_port_HAL_LPC1768_sw_I2C)->FIOCLR = LPC_PIN(SDA_pin_HAL_LPC1768_sw_I2C); |
|
||||
LPC_GPIO(SDA_port_HAL_LPC1768_sw_I2C)->FIOCLR = LPC_PIN(SDA_pin_HAL_LPC1768_sw_I2C); |
|
||||
} |
|
||||
|
|
||||
for (uint8_t j = 0; j < SPI_SPEED; j++) { |
|
||||
LPC_GPIO(SCL_port_HAL_LPC1768_sw_I2C)->FIOSET = LPC_PIN(SCL_pin_HAL_LPC1768_sw_I2C); |
|
||||
LPC_GPIO(SCL_port_HAL_LPC1768_sw_I2C)->FIOSET = LPC_PIN(SCL_pin_HAL_LPC1768_sw_I2C); |
|
||||
LPC_GPIO(SCL_port_HAL_LPC1768_sw_I2C)->FIOSET = LPC_PIN(SCL_pin_HAL_LPC1768_sw_I2C); |
|
||||
LPC_GPIO(SCL_port_HAL_LPC1768_sw_I2C)->FIOSET = LPC_PIN(SCL_pin_HAL_LPC1768_sw_I2C); |
|
||||
LPC_GPIO(SCL_port_HAL_LPC1768_sw_I2C)->FIOSET = LPC_PIN(SCL_pin_HAL_LPC1768_sw_I2C); |
|
||||
} |
|
||||
|
|
||||
for (uint8_t j = 0; j < SPI_SPEED; j++) { |
|
||||
LPC_GPIO(SCL_port_HAL_LPC1768_sw_I2C)->FIOCLR = LPC_PIN(SCL_pin_HAL_LPC1768_sw_I2C); |
|
||||
LPC_GPIO(SCL_port_HAL_LPC1768_sw_I2C)->FIOCLR = LPC_PIN(SCL_pin_HAL_LPC1768_sw_I2C); |
|
||||
} |
|
||||
val <<= 1; |
|
||||
} |
|
||||
return 1; |
|
||||
} |
|
||||
|
|
||||
|
|
||||
uint8_t u8g_i2c_start_sw(uint8_t sla) { // assert start condition and then send slave address with write bit |
|
||||
/* send the start condition, both lines go from 1 to 0 */ |
|
||||
|
|
||||
LPC_GPIO(SDA_port_HAL_LPC1768_sw_I2C)->FIOCLR = LPC_PIN(SDA_pin_HAL_LPC1768_sw_I2C); |
|
||||
LPC_GPIO(SCL_port_HAL_LPC1768_sw_I2C)->FIOCLR = LPC_PIN(SCL_pin_HAL_LPC1768_sw_I2C); |
|
||||
DELAY_US(2); |
|
||||
LPC_GPIO(SCL_port_HAL_LPC1768_sw_I2C)->FIOSET = LPC_PIN(SCL_pin_HAL_LPC1768_sw_I2C); |
|
||||
DELAY_US(2); |
|
||||
LPC_GPIO(SDA_port_HAL_LPC1768_sw_I2C)->FIOSET = LPC_PIN(SDA_pin_HAL_LPC1768_sw_I2C); |
|
||||
DELAY_US(2); |
|
||||
LPC_GPIO(SDA_port_HAL_LPC1768_sw_I2C)->FIOCLR = LPC_PIN(SDA_pin_HAL_LPC1768_sw_I2C); |
|
||||
DELAY_US(2); |
|
||||
LPC_GPIO(SCL_port_HAL_LPC1768_sw_I2C)->FIOCLR = LPC_PIN(SCL_pin_HAL_LPC1768_sw_I2C); |
|
||||
|
|
||||
u8g_i2c_send_byte_sw(I2C_SLA); // send slave address with write bit |
|
||||
} |
|
||||
|
|
||||
|
|
||||
void u8g_i2c_stop_sw() { } |
|
||||
|
|
||||
void u8g_i2c_init_sw(uint8_t clock_option) { u8g_i2c_start(0); } // send slave address and write bit |
|
||||
|
|
||||
uint8_t u8g_com_ssd_I2C_start_sequence_sw(u8g_t *u8g) { |
|
||||
/* are we requested to set the a0 state? */ |
|
||||
if (u8g->pin_list[U8G_PI_SET_A0] == 0) return 1; |
|
||||
|
|
||||
/* setup bus, might be a repeated start */ |
|
||||
if (u8g_i2c_start(I2C_SLA) == 0) return 0; |
|
||||
if (u8g->pin_list[U8G_PI_A0_STATE] == 0) { |
|
||||
if (u8g_i2c_send_byte(I2C_CMD_MODE) == 0) return 0; |
|
||||
} |
|
||||
else if (u8g_i2c_send_byte(I2C_DATA_MODE) == 0) return 0; |
|
||||
|
|
||||
u8g->pin_list[U8G_PI_SET_A0] = 0; |
|
||||
|
|
||||
return 1; |
|
||||
} |
|
||||
|
|
||||
uint8_t u8g_com_HAL_LPC1768_ssd_sw_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) { |
|
||||
switch (msg) { |
|
||||
case U8G_COM_MSG_INIT: |
|
||||
|
|
||||
#define LPC1768_PIN_PORT(pin) ((uint8_t)((pin >> 5) & 0b111)) |
|
||||
#define LPC1768_PIN_PIN(pin) ((uint8_t)(pin & 0b11111)) |
|
||||
SCL_pin_HAL_LPC1768_sw_I2C = LPC1768_PIN_PIN(u8g->pin_list[U8G_PI_SCL]); |
|
||||
SCL_port_HAL_LPC1768_sw_I2C = LPC1768_PIN_PORT(u8g->pin_list[U8G_PI_SCL]); |
|
||||
SDA_pin_HAL_LPC1768_sw_I2C = LPC1768_PIN_PIN(u8g->pin_list[U8G_PI_SDA]); |
|
||||
SDA_port_HAL_LPC1768_sw_I2C = LPC1768_PIN_PORT(u8g->pin_list[U8G_PI_SDA]); |
|
||||
// As defined by Arduino INPUT(0x0), OUTPUT(0x1), INPUT_PULLUP(0x2) |
|
||||
#define OUTPUT 0x1 |
|
||||
u8g_SetPIOutput(u8g, U8G_PI_SCL); |
|
||||
u8g_SetPIOutput(u8g, U8G_PI_SDA); |
|
||||
if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_CS]) u8g_SetPIOutput(u8g, U8G_PI_CS); |
|
||||
if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_A0]) u8g_SetPIOutput(u8g, U8G_PI_A0); |
|
||||
if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_RESET]) u8g_SetPIOutput(u8g, U8G_PI_RESET); |
|
||||
|
|
||||
//u8g_com_arduino_digital_write(u8g, U8G_PI_SCL, HIGH); |
|
||||
//u8g_com_arduino_digital_write(u8g, U8G_PI_SDA, HIGH); |
|
||||
//u8g->pin_list[U8G_PI_A0_STATE] = 0; /* initial RS state: unknown mode */ |
|
||||
|
|
||||
u8g_i2c_init_sw(u8g->pin_list[U8G_PI_I2C_OPTION]); |
|
||||
u8g_com_ssd_I2C_start_sequence_sw(u8g); |
|
||||
break; |
|
||||
|
|
||||
case U8G_COM_MSG_STOP: break; |
|
||||
|
|
||||
case U8G_COM_MSG_RESET: break; |
|
||||
|
|
||||
case U8G_COM_MSG_CHIP_SELECT: |
|
||||
u8g->pin_list[U8G_PI_A0_STATE] = 0; |
|
||||
u8g->pin_list[U8G_PI_SET_A0] = 1; /* force a0 to set again, also forces start condition */ |
|
||||
if (arg_val == 0) { |
|
||||
/* disable chip, send stop condition */ |
|
||||
u8g_i2c_stop_sw(); |
|
||||
} |
|
||||
else { |
|
||||
/* enable, do nothing: any byte writing will trigger the i2c start */ |
|
||||
} |
|
||||
break; |
|
||||
|
|
||||
case U8G_COM_MSG_WRITE_BYTE: |
|
||||
//u8g->pin_list[U8G_PI_SET_A0] = 1; |
|
||||
//if (u8g_com_arduino_ssd_start_sequence(u8g) == 0) |
|
||||
// return u8g_i2c_stop(), 0; |
|
||||
if (u8g_i2c_send_byte_sw(arg_val) == 0) |
|
||||
return u8g_i2c_stop_sw(), 0; |
|
||||
// u8g_i2c_stop(); |
|
||||
break; |
|
||||
|
|
||||
case U8G_COM_MSG_WRITE_SEQ: { |
|
||||
//u8g->pin_list[U8G_PI_SET_A0] = 1; |
|
||||
if (u8g_com_ssd_I2C_start_sequence_sw(u8g) == 0) |
|
||||
return u8g_i2c_stop_sw(), 0; |
|
||||
|
|
||||
uint8_t *ptr = (uint8_t *)arg_ptr; |
|
||||
while (arg_val > 0) { |
|
||||
if (u8g_i2c_send_byte_sw(*ptr++) == 0) |
|
||||
return u8g_i2c_stop_sw(), 0; |
|
||||
arg_val--; |
|
||||
} |
|
||||
} |
|
||||
// u8g_i2c_stop(); |
|
||||
break; |
|
||||
|
|
||||
case U8G_COM_MSG_WRITE_SEQ_P: { |
|
||||
//u8g->pin_list[U8G_PI_SET_A0] = 1; |
|
||||
if (u8g_com_ssd_I2C_start_sequence_sw(u8g) == 0) |
|
||||
return u8g_i2c_stop_sw(), 0; |
|
||||
|
|
||||
uint8_t *ptr = (uint8_t *)arg_ptr; |
|
||||
while (arg_val > 0) { |
|
||||
if (u8g_i2c_send_byte_sw(u8g_pgm_read(ptr)) == 0) return 0; |
|
||||
ptr++; |
|
||||
arg_val--; |
|
||||
} |
|
||||
} |
|
||||
// u8g_i2c_stop(); |
|
||||
break; |
|
||||
|
|
||||
case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */ |
|
||||
u8g->pin_list[U8G_PI_A0_STATE] = arg_val; |
|
||||
u8g->pin_list[U8G_PI_SET_A0] = 1; /* force a0 to set again */ |
|
||||
u8g_i2c_start_sw(0); // send slave address and write bit |
|
||||
u8g_i2c_send_byte_sw(arg_val ? 0x40 : 0x80); // Write to ? Graphics DRAM mode : Command mode |
|
||||
break; |
|
||||
} |
|
||||
return 1; |
|
||||
} |
|
||||
|
|
||||
#endif // HAS_GRAPHICAL_LCD |
|
||||
|
|
||||
#endif // TARGET_LPC1768 |
|
Loading…
Reference in new issue