Scott Lahteine
8 years ago
committed by
GitHub
GitHub
36 changed files with 351 additions and 202 deletions
@ -0,0 +1,115 @@ |
|||
/**
|
|||
* Marlin 3D Printer Firmware |
|||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|||
* |
|||
* Based on Sprinter and grbl. |
|||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm |
|||
* |
|||
* This program is free software: you can redistribute it and/or modify |
|||
* it under the terms of the GNU General Public License as published by |
|||
* the Free Software Foundation, either version 3 of the License, or |
|||
* (at your option) any later version. |
|||
* |
|||
* This program is distributed in the hope that it will be useful, |
|||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
|||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
|||
* GNU General Public License for more details. |
|||
* |
|||
* You should have received a copy of the GNU General Public License |
|||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
* |
|||
*/ |
|||
|
|||
/*
|
|||
* Driver for the Philips PCA9632 LED driver. |
|||
* Written by Robert Mendon Feb 2017. |
|||
*/ |
|||
|
|||
#include "MarlinConfig.h" |
|||
|
|||
#if ENABLED(PCA9632) |
|||
|
|||
#include "pca9632.h" |
|||
|
|||
#define PCA9632_MODE1_VALUE 0b00000001 //(ALLCALL)
|
|||
#define PCA9632_MODE2_VALUE 0b00010101 //(DIMMING, INVERT, CHANGE ON STOP,TOTEM)
|
|||
#define PCA9632_LEDOUT_VALUE 0b00101010 |
|||
|
|||
|
|||
/* Register addresses */ |
|||
#define PCA9632_MODE1 0x00 |
|||
#define PCA9632_MODE2 0x01 |
|||
#define PCA9632_PWM0 0x02 |
|||
#define PCA9632_PWM1 0x03 |
|||
#define PCA9632_PWM2 0x04 |
|||
#define PCA9632_PWM3 0x05 |
|||
#define PCA9632_GRPPWM 0x06 |
|||
#define PCA9632_GRPFREQ 0x07 |
|||
#define PCA9632_LEDOUT 0X08 |
|||
#define PCA9632_SUBADR1 0x09 |
|||
#define PCA9632_SUBADR2 0x0A |
|||
#define PCA9632_SUBADR3 0x0B |
|||
#define PCA9632_ALLCALLADDR 0x0C |
|||
|
|||
#define PCA9632_NO_AUTOINC 0x00 |
|||
#define PCA9632_AUTO_ALL 0x80 |
|||
#define PCA9632_AUTO_IND 0xA0 |
|||
#define PCA9632_AUTOGLO 0xC0 |
|||
#define PCA9632_AUTOGI 0xE0 |
|||
|
|||
// Red LED0
|
|||
// Green LED1
|
|||
// Blue LED2
|
|||
#define PCA9632_RED 0x00 |
|||
#define PCA9632_GRN 0x02 |
|||
#define PCA9632_BLU 0x04 |
|||
|
|||
#define LED_OFF 0x00 |
|||
#define LED_ON 0x01 |
|||
#define LED_PWM 0x02 |
|||
|
|||
#define PCA9632_ADDRESS 0b01100000 |
|||
|
|||
byte PCA_init = 0; |
|||
|
|||
static void PCA9632_WriteRegister(const byte addr, const byte regadd, const byte value) { |
|||
Wire.beginTransmission(addr); |
|||
Wire.write(regadd); |
|||
Wire.write(value); |
|||
Wire.endTransmission(); |
|||
} |
|||
|
|||
static void PCA9632_WriteAllRegisters(const byte addr, const byte regadd, const byte value1, const byte value2, const byte value3) { |
|||
Wire.beginTransmission(addr); |
|||
Wire.write(PCA9632_AUTO_IND | regadd); |
|||
Wire.write(value1); |
|||
Wire.write(value2); |
|||
Wire.write(value3); |
|||
Wire.endTransmission(); |
|||
} |
|||
|
|||
static byte PCA9632_ReadRegister(const byte addr, const byte regadd) { |
|||
Wire.beginTransmission(addr); |
|||
Wire.write(regadd); |
|||
const byte value = Wire.read(); |
|||
Wire.endTransmission(); |
|||
return value; |
|||
} |
|||
|
|||
void PCA9632_SetColor(const byte r, const byte g, const byte b) { |
|||
if (!PCA_init) { |
|||
PCA_init = 1; |
|||
Wire.begin(); |
|||
PCA9632_WriteRegister(PCA9632_ADDRESS,PCA9632_MODE1, PCA9632_MODE1_VALUE); |
|||
PCA9632_WriteRegister(PCA9632_ADDRESS,PCA9632_MODE2, PCA9632_MODE2_VALUE); |
|||
} |
|||
|
|||
const byte LEDOUT = (r ? LED_PWM << PCA9632_RED : 0) |
|||
| (g ? LED_PWM << PCA9632_GRN : 0) |
|||
| (b ? LED_PWM << PCA9632_BLU : 0); |
|||
|
|||
PCA9632_WriteAllRegisters(PCA9632_ADDRESS,PCA9632_PWM0, r, g, b); |
|||
PCA9632_WriteRegister(PCA9632_ADDRESS,PCA9632_LEDOUT, LEDOUT); |
|||
} |
|||
|
|||
#endif // PCA9632
|
|||
@ -0,0 +1,36 @@ |
|||
/**
|
|||
* Marlin 3D Printer Firmware |
|||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|||
* |
|||
* Based on Sprinter and grbl. |
|||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm |
|||
* |
|||
* This program is free software: you can redistribute it and/or modify |
|||
* it under the terms of the GNU General Public License as published by |
|||
* the Free Software Foundation, either version 3 of the License, or |
|||
* (at your option) any later version. |
|||
* |
|||
* This program is distributed in the hope that it will be useful, |
|||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
|||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
|||
* GNU General Public License for more details. |
|||
* |
|||
* You should have received a copy of the GNU General Public License |
|||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
* |
|||
*/ |
|||
|
|||
/*
|
|||
* Driver for the Philips PCA9632 LED driver. |
|||
* Written by Robert Mendon Feb 2017. |
|||
*/ |
|||
|
|||
#ifndef __PCA9632_H__ |
|||
#define __PCA9632_H__ |
|||
|
|||
#include "Arduino.h" |
|||
#include "Wire.h" |
|||
|
|||
void PCA9632_SetColor(const byte r, const byte g, const byte b); |
|||
|
|||
#endif // __PCA9632_H__
|
|||
Loading…
Reference in new issue