From 416234f43a347394d639fbacc3183891d7b0bb50 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Wed, 18 Aug 2021 20:12:41 -0500 Subject: [PATCH] =?UTF-8?q?=E2=9C=A8=20Add=20TEMP=5FSENSOR=5FBOARD=20(#222?= =?UTF-8?q?79,=20#22342,=20#22343,=20#22344,=20#22350)?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- Marlin/Configuration.h | 16 +- Marlin/Configuration_adv.h | 40 +- Marlin/src/MarlinCore.cpp | 4 +- Marlin/src/core/language.h | 3 + Marlin/src/feature/controllerfan.cpp | 11 +- Marlin/src/inc/Conditionals_adv.h | 414 +++++++++++++++- Marlin/src/inc/Conditionals_post.h | 456 +++--------------- Marlin/src/inc/SanityCheck.h | 124 +++-- Marlin/src/lcd/thermistornames.h | 2 + Marlin/src/module/temperature.cpp | 143 ++++-- Marlin/src/module/temperature.h | 41 +- .../src/module/thermistor/thermistor_2000.h | 60 +++ Marlin/src/module/thermistor/thermistors.h | 21 + Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h | 2 +- .../src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h | 2 +- Marlin/src/pins/rambo/pins_EINSY_RAMBO.h | 9 +- Marlin/src/pins/sam/pins_DUE3DOM_MINI.h | 2 +- .../src/pins/stm32f4/pins_BTT_BTT002_V1_0.h | 1 + buildroot/tests/mega2560 | 11 + 19 files changed, 836 insertions(+), 526 deletions(-) create mode 100644 Marlin/src/module/thermistor/thermistor_2000.h diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index a74cca4faf..d01fc98b40 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -452,6 +452,7 @@ * 67 : 500kΩ SliceEngineering 450°C Thermistor * 70 : 100kΩ bq Hephestos 2 * 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32 + * 2000 : 100kΩ Ultimachine Rambo TDK NTCG104LH104KT1 NTC100K motherboard Thermistor * * Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ. * ------- (but gives greater accuracy and more stable PID) @@ -475,7 +476,7 @@ * NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C. * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x * - * Custom/Dummy/Other Thermos + * Custom/Dummy/Other Thermal Sensors * ------ * 0 : not used * 1000 : Custom - Specify parameters in Configuration_adv.h @@ -497,6 +498,7 @@ #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 +#define TEMP_SENSOR_BOARD 0 #define TEMP_SENSOR_REDUNDANT 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 @@ -529,17 +531,11 @@ * the print will be aborted. Whichever sensor is selected will have its normal functions disabled; i.e. selecting * the Bed sensor (-1) will disable bed heating/monitoring. * - * Use the following to select temp sensors: - * -5 : Cooler - * -4 : Probe - * -3 : not used - * -2 : Chamber - * -1 : Bed - * 0-7 : E0 through E7 + * For selecting source/target use: COOLER, PROBE, BOARD, CHAMBER, BED, E0, E1, E2, E3, E4, E5, E6, E7 */ #if TEMP_SENSOR_REDUNDANT - #define TEMP_SENSOR_REDUNDANT_SOURCE 1 // The sensor that will provide the redundant reading. - #define TEMP_SENSOR_REDUNDANT_TARGET 0 // The sensor that we are providing a redundant reading for. + #define TEMP_SENSOR_REDUNDANT_SOURCE E1 // The sensor that will provide the redundant reading. + #define TEMP_SENSOR_REDUNDANT_TARGET E0 // The sensor that we are providing a redundant reading for. #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 2186ed543b..9293ffabee 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -125,6 +125,12 @@ #define PROBE_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_BOARD == 1000 + #define BOARD_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define BOARD_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define BOARD_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_REDUNDANT == 1000 #define REDUNDANT_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define REDUNDANT_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -224,6 +230,18 @@ #endif #endif +// +// Motherboard Sensor options +// +#if TEMP_SENSOR_BOARD + #define THERMAL_PROTECTION_BOARD // Halt the printer if the board sensor leaves the temp range below. + #define BOARD_MINTEMP 8 // (°C) + #define BOARD_MAXTEMP 70 // (°C) + #ifndef TEMP_BOARD_PIN + //#define TEMP_BOARD_PIN -1 // Board temp sensor pin, if not set in pins file. + #endif +#endif + // // Laser Coolant Flow Meter // @@ -480,16 +498,20 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered - //#define CONTROLLER_FAN_IGNORE_Z // Ignore Z stepper. Useful when stepper timeout is disabled. - #define CONTROLLERFAN_SPEED_MIN 0 // (0-255) Minimum speed. (If set below this value the fan is turned off.) - #define CONTROLLERFAN_SPEED_ACTIVE 255 // (0-255) Active speed, used when any motor is enabled - #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled - #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors - //#define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered + //#define CONTROLLER_FAN_IGNORE_Z // Ignore Z stepper. Useful when stepper timeout is disabled. + #define CONTROLLERFAN_SPEED_MIN 0 // (0-255) Minimum speed. (If set below this value the fan is turned off.) + #define CONTROLLERFAN_SPEED_ACTIVE 255 // (0-255) Active speed, used when any motor is enabled + #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled + #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors + + // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan + //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature + + //#define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings #if ENABLED(CONTROLLER_FAN_EDITABLE) - #define CONTROLLER_FAN_MENU // Enable the Controller Fan submenu + #define CONTROLLER_FAN_MENU // Enable the Controller Fan submenu #endif #endif diff --git a/Marlin/src/MarlinCore.cpp b/Marlin/src/MarlinCore.cpp index 4c6c745df2..3bd64de429 100644 --- a/Marlin/src/MarlinCore.cpp +++ b/Marlin/src/MarlinCore.cpp @@ -1218,10 +1218,10 @@ void setup() { SETUP_RUN(HAL_init()); // Init and disable SPI thermocouples; this is still needed - #if TEMP_SENSOR_0_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && TEMP_SENSOR_REDUNDANT_SOURCE == 0) + #if TEMP_SENSOR_0_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && REDUNDANT_TEMP_MATCH(SOURCE, E0)) OUT_WRITE(TEMP_0_CS_PIN, HIGH); // Disable #endif - #if TEMP_SENSOR_1_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && TEMP_SENSOR_REDUNDANT_SOURCE == 1) + #if TEMP_SENSOR_1_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && REDUNDANT_TEMP_MATCH(SOURCE, E1)) OUT_WRITE(TEMP_1_CS_PIN, HIGH); #endif diff --git a/Marlin/src/core/language.h b/Marlin/src/core/language.h index 8e97ec66a9..8de8397593 100644 --- a/Marlin/src/core/language.h +++ b/Marlin/src/core/language.h @@ -231,6 +231,9 @@ #define STR_HEATER_BED "bed" #define STR_HEATER_CHAMBER "chamber" #define STR_COOLER "cooler" +#define STR_MOTHERBOARD "motherboard" +#define STR_PROBE "probe" +#define STR_REDUNDANT "redundant " #define STR_LASER_TEMP "laser temperature" #define STR_STOPPED_HEATER ", system stopped! Heater_ID: " diff --git a/Marlin/src/feature/controllerfan.cpp b/Marlin/src/feature/controllerfan.cpp index 0206467752..35f567fa8f 100644 --- a/Marlin/src/feature/controllerfan.cpp +++ b/Marlin/src/feature/controllerfan.cpp @@ -76,9 +76,14 @@ void ControllerFan::update() { ) ); - // If any of the drivers or the heated bed are enabled... - if (motor_on || TERN0(HAS_HEATED_BED, thermalManager.temp_bed.soft_pwm_amount > 0)) - lastMotorOn = ms; //... set time to NOW so the fan will turn on + // If any triggers for the controller fan are true... + // - At least one stepper driver is enabled + // - The heated bed is enabled + // - TEMP_SENSOR_BOARD is reporting >= CONTROLLER_FAN_MIN_BOARD_TEMP + if ( motor_on + || TERN0(HAS_HEATED_BED, thermalManager.temp_bed.soft_pwm_amount > 0) + || TERN0(HAS_CONTROLLER_FAN_MIN_BOARD_TEMP, thermalManager.wholeDegBoard() >= CONTROLLER_FAN_MIN_BOARD_TEMP) + ) lastMotorOn = ms; //... set time to NOW so the fan will turn on // Fan Settings. Set fan > 0: // - If AutoMode is on and steppers have been enabled for CONTROLLERFAN_IDLE_TIME seconds. diff --git a/Marlin/src/inc/Conditionals_adv.h b/Marlin/src/inc/Conditionals_adv.h index 7fe0ee6def..c259750c6f 100644 --- a/Marlin/src/inc/Conditionals_adv.h +++ b/Marlin/src/inc/Conditionals_adv.h @@ -112,17 +112,419 @@ #undef STEALTHCHOP_E #endif -#if TEMP_SENSOR_BED == 0 - #undef THERMAL_PROTECTION_BED - #undef THERMAL_PROTECTION_BED_PERIOD +/** + * Temperature Sensors; define what sensor(s) we have. + */ + +// Temperature sensor IDs +#define HID_REDUNDANT -6 +#define HID_COOLER -5 +#define HID_PROBE -4 +#define HID_BOARD -3 +#define HID_CHAMBER -2 +#define HID_BED -1 +#define HID_E0 0 +#define HID_E1 1 +#define HID_E2 2 +#define HID_E3 3 +#define HID_E4 4 +#define HID_E5 5 +#define HID_E6 6 +#define HID_E7 7 + +#define ANY_TEMP_SENSOR_IS(n) (n == TEMP_SENSOR_0 || n == TEMP_SENSOR_1 || n == TEMP_SENSOR_2 || n == TEMP_SENSOR_3 \ + || n == TEMP_SENSOR_4 || n == TEMP_SENSOR_5 || n == TEMP_SENSOR_6 || n == TEMP_SENSOR_7 \ + || n == TEMP_SENSOR_BED \ + || n == TEMP_SENSOR_PROBE \ + || n == TEMP_SENSOR_CHAMBER \ + || n == TEMP_SENSOR_COOLER \ + || n == TEMP_SENSOR_REDUNDANT ) +#if ANY_TEMP_SENSOR_IS(1000) + #define HAS_USER_THERMISTORS 1 +#endif +#undef ANY_TEMP_SENSOR_IS + +#if TEMP_SENSOR_REDUNDANT + #define _HEATER_ID(M) HID_##M + #define HEATER_ID(M) _HEATER_ID(M) + #define REDUNDANT_TEMP_MATCH(M,N) (HEATER_ID(TEMP_SENSOR_REDUNDANT_##M) == _HEATER_ID(N)) +#else + #define REDUNDANT_TEMP_MATCH(...) 0 #endif -#if TEMP_SENSOR_CHAMBER == 0 - #undef THERMAL_PROTECTION_CHAMBER +#if TEMP_SENSOR_0 == -5 || TEMP_SENSOR_0 == -3 || TEMP_SENSOR_0 == -2 + #define TEMP_SENSOR_0_IS_MAX_TC 1 + #if TEMP_SENSOR_0 == -5 + #define TEMP_SENSOR_0_IS_MAX31865 1 + #define TEMP_SENSOR_0_MAX_TC_TMIN 0 + #define TEMP_SENSOR_0_MAX_TC_TMAX 1024 + #ifndef MAX31865_SENSOR_WIRES_0 + #define MAX31865_SENSOR_WIRES_0 2 + #endif + #elif TEMP_SENSOR_0 == -3 + #define TEMP_SENSOR_0_IS_MAX31855 1 + #define TEMP_SENSOR_0_MAX_TC_TMIN -270 + #define TEMP_SENSOR_0_MAX_TC_TMAX 1800 + #elif TEMP_SENSOR_0 == -2 + #define TEMP_SENSOR_0_IS_MAX6675 1 + #define TEMP_SENSOR_0_MAX_TC_TMIN 0 + #define TEMP_SENSOR_0_MAX_TC_TMAX 1024 + #endif +#elif TEMP_SENSOR_0 == -4 + #define TEMP_SENSOR_0_IS_AD8495 1 +#elif TEMP_SENSOR_0 == -1 + #define TEMP_SENSOR_0_IS_AD595 1 +#elif TEMP_SENSOR_0 > 0 + #define TEMP_SENSOR_0_IS_THERMISTOR 1 + #if TEMP_SENSOR_0 == 1000 + #define TEMP_SENSOR_0_IS_CUSTOM 1 + #elif TEMP_SENSOR_0 == 998 || TEMP_SENSOR_0 == 999 + #define TEMP_SENSOR_0_IS_DUMMY 1 + #endif +#else + #undef HEATER_0_MINTEMP + #undef HEATER_0_MAXTEMP +#endif + +#if TEMP_SENSOR_1 == -5 || TEMP_SENSOR_1 == -3 || TEMP_SENSOR_1 == -2 + #define TEMP_SENSOR_1_IS_MAX_TC 1 + #if TEMP_SENSOR_1 == -5 + #define TEMP_SENSOR_1_IS_MAX31865 1 + #define TEMP_SENSOR_1_MAX_TC_TMIN 0 + #define TEMP_SENSOR_1_MAX_TC_TMAX 1024 + #ifndef MAX31865_SENSOR_WIRES_1 + #define MAX31865_SENSOR_WIRES_1 2 + #endif + #elif TEMP_SENSOR_1 == -3 + #define TEMP_SENSOR_1_IS_MAX31855 1 + #define TEMP_SENSOR_1_MAX_TC_TMIN -270 + #define TEMP_SENSOR_1_MAX_TC_TMAX 1800 + #elif TEMP_SENSOR_1 == -2 + #define TEMP_SENSOR_1_IS_MAX6675 1 + #define TEMP_SENSOR_1_MAX_TC_TMIN 0 + #define TEMP_SENSOR_1_MAX_TC_TMAX 1024 + #endif + + #if TEMP_SENSOR_1 != TEMP_SENSOR_0 + #if TEMP_SENSOR_1 == -5 + #error "If MAX31865 Thermocouple (-5) is used for TEMP_SENSOR_1 then TEMP_SENSOR_0 must match." + #elif TEMP_SENSOR_1 == -3 + #error "If MAX31855 Thermocouple (-3) is used for TEMP_SENSOR_1 then TEMP_SENSOR_0 must match." + #elif TEMP_SENSOR_1 == -2 + #error "If MAX6675 Thermocouple (-2) is used for TEMP_SENSOR_1 then TEMP_SENSOR_0 must match." + #endif + #endif +#elif TEMP_SENSOR_1 == -4 + #define TEMP_SENSOR_1_IS_AD8495 1 +#elif TEMP_SENSOR_1 == -1 + #define TEMP_SENSOR_1_IS_AD595 1 +#elif TEMP_SENSOR_1 > 0 + #define TEMP_SENSOR_1_IS_THERMISTOR 1 + #if TEMP_SENSOR_1 == 1000 + #define TEMP_SENSOR_1_IS_CUSTOM 1 + #elif TEMP_SENSOR_1 == 998 || TEMP_SENSOR_1 == 999 + #define TEMP_SENSOR_1_IS_DUMMY 1 + #endif +#else + #undef HEATER_1_MINTEMP + #undef HEATER_1_MAXTEMP +#endif + +#if TEMP_SENSOR_REDUNDANT == -5 || TEMP_SENSOR_REDUNDANT == -3 || TEMP_SENSOR_REDUNDANT == -2 + #define TEMP_SENSOR_REDUNDANT_IS_MAX_TC 1 + + #if TEMP_SENSOR_REDUNDANT == -5 + #if !REDUNDANT_TEMP_MATCH(SOURCE, E0) && !REDUNDANT_TEMP_MATCH(SOURCE, E1) + #error "MAX31865 Thermocouples (-5) not supported for TEMP_SENSOR_REDUNDANT_SOURCE other than TEMP_SENSOR_0/TEMP_SENSOR_1 (0/1)." + #endif + + #define TEMP_SENSOR_REDUNDANT_IS_MAX31865 1 + #define TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN 0 + #define TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX 1024 + #elif TEMP_SENSOR_REDUNDANT == -3 + #if !REDUNDANT_TEMP_MATCH(SOURCE, E0) && !REDUNDANT_TEMP_MATCH(SOURCE, E1) + #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_REDUNDANT_SOURCE other than TEMP_SENSOR_0/TEMP_SENSOR_1 (0/1)." + #endif + + #define TEMP_SENSOR_REDUNDANT_IS_MAX31855 1 + #define TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN -270 + #define TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX 1800 + #elif TEMP_SENSOR_REDUNDANT == -2 + #if !REDUNDANT_TEMP_MATCH(SOURCE, E0) && !REDUNDANT_TEMP_MATCH(SOURCE, E1) + #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_REDUNDANT_SOURCE other than TEMP_SENSOR_0/TEMP_SENSOR_1 (0/1)." + #endif + + #define TEMP_SENSOR_REDUNDANT_IS_MAX6675 1 + #define TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN 0 + #define TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX 1024 + #endif + + // mimic setting up the source TEMP_SENSOR + #if REDUNDANT_TEMP_MATCH(SOURCE, E0) + #define TEMP_SENSOR_0_MAX_TC_TMIN TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN + #define TEMP_SENSOR_0_MAX_TC_TMAX TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX + #ifndef MAX31865_SENSOR_WIRES_0 + #define MAX31865_SENSOR_WIRES_0 2 + #endif + #elif REDUNDANT_TEMP_MATCH(SOURCE, E1) + #define TEMP_SENSOR_1_MAX_TC_TMIN TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN + #define TEMP_SENSOR_1_MAX_TC_TMAX TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX + #ifndef MAX31865_SENSOR_WIRES_1 + #define MAX31865_SENSOR_WIRES_1 2 + #endif + #endif + + #if (TEMP_SENSOR_0_IS_MAX_TC && TEMP_SENSOR_REDUNDANT != TEMP_SENSOR_0) || (TEMP_SENSOR_1_IS_MAX_TC && TEMP_SENSOR_REDUNDANT != TEMP_SENSOR_1) + #if TEMP_SENSOR_REDUNDANT == -5 + #error "If MAX31865 Thermocouple (-5) is used for TEMP_SENSOR_0/TEMP_SENSOR_1 then TEMP_SENSOR_REDUNDANT must match." + #elif TEMP_SENSOR_REDUNDANT == -3 + #error "If MAX31855 Thermocouple (-3) is used for TEMP_SENSOR_0/TEMP_SENSOR_1 then TEMP_SENSOR_REDUNDANT must match." + #elif TEMP_SENSOR_REDUNDANT == -2 + #error "If MAX6675 Thermocouple (-2) is used for TEMP_SENSOR_0/TEMP_SENSOR_1 then TEMP_SENSOR_REDUNDANT must match." + #endif + #endif +#elif TEMP_SENSOR_REDUNDANT == -4 + #define TEMP_SENSOR_REDUNDANT_IS_AD8495 1 +#elif TEMP_SENSOR_REDUNDANT == -1 + #define TEMP_SENSOR_REDUNDANT_IS_AD595 1 +#elif TEMP_SENSOR_REDUNDANT > 0 + #define TEMP_SENSOR_REDUNDANT_IS_THERMISTOR 1 + #if TEMP_SENSOR_REDUNDANT == 1000 + #define TEMP_SENSOR_REDUNDANT_IS_CUSTOM 1 + #elif TEMP_SENSOR_REDUNDANT == 998 || TEMP_SENSOR_REDUNDANT == 999 + #error "Dummy sensors are not supported for TEMP_SENSOR_REDUNDANT." + #endif +#endif + +#if TEMP_SENSOR_0_IS_MAX_TC || TEMP_SENSOR_1_IS_MAX_TC || TEMP_SENSOR_REDUNDANT_IS_MAX_TC + #define HAS_MAX_TC 1 +#endif +#if TEMP_SENSOR_0_IS_MAX6675 || TEMP_SENSOR_1_IS_MAX6675 || TEMP_SENSOR_REDUNDANT_IS_MAX6675 + #define HAS_MAX6675 1 +#endif +#if TEMP_SENSOR_0_IS_MAX31855 || TEMP_SENSOR_1_IS_MAX31855 || TEMP_SENSOR_REDUNDANT_IS_MAX31855 + #define HAS_MAX31855 1 +#endif +#if TEMP_SENSOR_0_IS_MAX31865 || TEMP_SENSOR_1_IS_MAX31865 || TEMP_SENSOR_REDUNDANT_IS_MAX31865 + #define HAS_MAX31865 1 #endif -#if TEMP_SENSOR_COOLER == 0 +#if TEMP_SENSOR_2 == -4 + #define TEMP_SENSOR_2_IS_AD8495 1 +#elif TEMP_SENSOR_2 == -3 + #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_2." +#elif TEMP_SENSOR_2 == -2 + #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_2." +#elif TEMP_SENSOR_2 == -1 + #define TEMP_SENSOR_2_IS_AD595 1 +#elif TEMP_SENSOR_2 > 0 + #define TEMP_SENSOR_2_IS_THERMISTOR 1 + #if TEMP_SENSOR_2 == 1000 + #define TEMP_SENSOR_2_IS_CUSTOM 1 + #elif TEMP_SENSOR_2 == 998 || TEMP_SENSOR_2 == 999 + #define TEMP_SENSOR_2_IS_DUMMY 1 + #endif +#else + #undef HEATER_2_MINTEMP + #undef HEATER_2_MAXTEMP +#endif + +#if TEMP_SENSOR_3 == -4 + #define TEMP_SENSOR_3_IS_AD8495 1 +#elif TEMP_SENSOR_3 == -3 + #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_3." +#elif TEMP_SENSOR_3 == -2 + #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_3." +#elif TEMP_SENSOR_3 == -1 + #define TEMP_SENSOR_3_IS_AD595 1 +#elif TEMP_SENSOR_3 > 0 + #define TEMP_SENSOR_3_IS_THERMISTOR 1 + #if TEMP_SENSOR_3 == 1000 + #define TEMP_SENSOR_3_IS_CUSTOM 1 + #elif TEMP_SENSOR_3 == 998 || TEMP_SENSOR_3 == 999 + #define TEMP_SENSOR_3_IS_DUMMY 1 + #endif +#else + #undef HEATER_3_MINTEMP + #undef HEATER_3_MAXTEMP +#endif + +#if TEMP_SENSOR_4 == -4 + #define TEMP_SENSOR_4_IS_AD8495 1 +#elif TEMP_SENSOR_4 == -3 + #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_4." +#elif TEMP_SENSOR_4 == -2 + #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_4." +#elif TEMP_SENSOR_4 == -1 + #define TEMP_SENSOR_4_IS_AD595 1 +#elif TEMP_SENSOR_4 > 0 + #define TEMP_SENSOR_4_IS_THERMISTOR 1 + #if TEMP_SENSOR_4 == 1000 + #define TEMP_SENSOR_4_IS_CUSTOM 1 + #elif TEMP_SENSOR_4 == 998 || TEMP_SENSOR_4 == 999 + #define TEMP_SENSOR_4_IS_DUMMY 1 + #endif +#else + #undef HEATER_4_MINTEMP + #undef HEATER_4_MAXTEMP +#endif + +#if TEMP_SENSOR_5 == -4 + #define TEMP_SENSOR_5_IS_AD8495 1 +#elif TEMP_SENSOR_5 == -3 + #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_5." +#elif TEMP_SENSOR_5 == -2 + #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_5." +#elif TEMP_SENSOR_5 == -1 + #define TEMP_SENSOR_5_IS_AD595 1 +#elif TEMP_SENSOR_5 > 0 + #define TEMP_SENSOR_5_IS_THERMISTOR 1 + #if TEMP_SENSOR_5 == 1000 + #define TEMP_SENSOR_5_IS_CUSTOM 1 + #elif TEMP_SENSOR_5 == 998 || TEMP_SENSOR_5 == 999 + #define TEMP_SENSOR_5_IS_DUMMY 1 + #endif +#else + #undef HEATER_5_MINTEMP + #undef HEATER_5_MAXTEMP +#endif + +#if TEMP_SENSOR_6 == -4 + #define TEMP_SENSOR_6_IS_AD8495 1 +#elif TEMP_SENSOR_6 == -3 + #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_6." +#elif TEMP_SENSOR_6 == -2 + #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_6." +#elif TEMP_SENSOR_6 == -1 + #define TEMP_SENSOR_6_IS_AD595 1 +#elif TEMP_SENSOR_6 > 0 + #define TEMP_SENSOR_6_IS_THERMISTOR 1 + #if TEMP_SENSOR_6 == 1000 + #define TEMP_SENSOR_6_IS_CUSTOM 1 + #elif TEMP_SENSOR_6 == 998 || TEMP_SENSOR_6 == 999 + #define TEMP_SENSOR_6_IS_DUMMY 1 + #endif +#else + #undef HEATER_6_MINTEMP + #undef HEATER_6_MAXTEMP +#endif + +#if TEMP_SENSOR_7 == -4 + #define TEMP_SENSOR_7_IS_AD8495 1 +#elif TEMP_SENSOR_7 == -3 + #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_7." +#elif TEMP_SENSOR_7 == -2 + #error "MAX7775 Thermocouples (-2) not supported for TEMP_SENSOR_7." +#elif TEMP_SENSOR_7 == -1 + #define TEMP_SENSOR_7_IS_AD595 1 +#elif TEMP_SENSOR_7 > 0 + #define TEMP_SENSOR_7_IS_THERMISTOR 1 + #if TEMP_SENSOR_7 == 1000 + #define TEMP_SENSOR_7_IS_CUSTOM 1 + #elif TEMP_SENSOR_7 == 998 || TEMP_SENSOR_7 == 999 + #define TEMP_SENSOR_7_IS_DUMMY 1 + #endif +#else + #undef HEATER_7_MINTEMP + #undef HEATER_7_MAXTEMP +#endif + +#if TEMP_SENSOR_BED == -4 + #define TEMP_SENSOR_BED_IS_AD8495 1 +#elif TEMP_SENSOR_BED == -3 + #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_BED." +#elif TEMP_SENSOR_BED == -2 + #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_BED." +#elif TEMP_SENSOR_BED == -1 + #define TEMP_SENSOR_BED_IS_AD595 1 +#elif TEMP_SENSOR_BED > 0 + #define TEMP_SENSOR_BED_IS_THERMISTOR 1 + #if TEMP_SENSOR_BED == 1000 + #define TEMP_SENSOR_BED_IS_CUSTOM 1 + #elif TEMP_SENSOR_BED == 998 || TEMP_SENSOR_BED == 999 + #define TEMP_SENSOR_BED_IS_DUMMY 1 + #endif +#else + #undef THERMAL_PROTECTION_BED + #undef THERMAL_PROTECTION_BED_PERIOD + #undef BED_MINTEMP + #undef BED_MAXTEMP +#endif + +#if TEMP_SENSOR_CHAMBER == -4 + #define TEMP_SENSOR_CHAMBER_IS_AD8495 1 +#elif TEMP_SENSOR_CHAMBER == -3 + #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_CHAMBER." +#elif TEMP_SENSOR_CHAMBER == -2 + #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_CHAMBER." +#elif TEMP_SENSOR_CHAMBER == -1 + #define TEMP_SENSOR_CHAMBER_IS_AD595 1 +#elif TEMP_SENSOR_CHAMBER > 0 + #define TEMP_SENSOR_CHAMBER_IS_THERMISTOR 1 + #if TEMP_SENSOR_CHAMBER == 1000 + #define TEMP_SENSOR_CHAMBER_IS_CUSTOM 1 + #elif TEMP_SENSOR_CHAMBER == 998 || TEMP_SENSOR_CHAMBER == 999 + #define TEMP_SENSOR_CHAMBER_IS_DUMMY 1 + #endif +#else + #undef THERMAL_PROTECTION_CHAMBER + #undef CHAMBER_MINTEMP + #undef CHAMBER_MAXTEMP +#endif + +#if TEMP_SENSOR_COOLER == -4 + #define TEMP_SENSOR_COOLER_IS_AD8495 1 +#elif TEMP_SENSOR_COOLER == -3 + #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_COOLER." +#elif TEMP_SENSOR_COOLER == -2 + #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_COOLER." +#elif TEMP_SENSOR_COOLER == -1 + #define TEMP_SENSOR_COOLER_IS_AD595 1 +#elif TEMP_SENSOR_COOLER > 0 + #define TEMP_SENSOR_COOLER_IS_THERMISTOR 1 + #if TEMP_SENSOR_COOLER == 1000 + #define TEMP_SENSOR_COOLER_IS_CUSTOM 1 + #elif TEMP_SENSOR_COOLER == 998 || TEMP_SENSOR_COOLER == 999 + #define TEMP_SENSOR_COOLER_IS_DUMMY 1 + #endif +#else #undef THERMAL_PROTECTION_COOLER + #undef COOLER_MINTEMP + #undef COOLER_MAXTEMP +#endif + +#if TEMP_SENSOR_PROBE == -4 + #define TEMP_SENSOR_PROBE_IS_AD8495 1 +#elif TEMP_SENSOR_PROBE == -3 + #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_PROBE." +#elif TEMP_SENSOR_PROBE == -2 + #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_PROBE." +#elif TEMP_SENSOR_PROBE == -1 + #define TEMP_SENSOR_PROBE_IS_AD595 1 +#elif TEMP_SENSOR_PROBE > 0 + #define TEMP_SENSOR_PROBE_IS_THERMISTOR 1 + #if TEMP_SENSOR_PROBE == 1000 + #define TEMP_SENSOR_PROBE_IS_CUSTOM 1 + #elif TEMP_SENSOR_PROBE == 998 || TEMP_SENSOR_PROBE == 999 + #define TEMP_SENSOR_PROBE_IS_DUMMY 1 + #endif +#endif + +#if TEMP_SENSOR_BOARD == -4 + #define TEMP_SENSOR_BOARD_IS_AD8495 1 +#elif TEMP_SENSOR_BOARD == -3 + #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_BOARD." +#elif TEMP_SENSOR_BOARD == -2 + #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_BOARD." +#elif TEMP_SENSOR_BOARD == -1 + #define TEMP_SENSOR_BOARD_IS_AD595 1 +#elif TEMP_SENSOR_BOARD > 0 + #define TEMP_SENSOR_BOARD_IS_THERMISTOR 1 + #if TEMP_SENSOR_BOARD == 1000 + #define TEMP_SENSOR_BOARD_IS_CUSTOM 1 + #elif TEMP_SENSOR_BOARD == 998 || TEMP_SENSOR_BOARD == 999 + #define TEMP_SENSOR_BOARD_IS_DUMMY 1 + #endif #endif #if ENABLED(MIXING_EXTRUDER) && (ENABLED(RETRACT_SYNC_MIXING) || BOTH(FILAMENT_LOAD_UNLOAD_GCODES, FILAMENT_UNLOAD_ALL_EXTRUDERS)) diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h index 2fb276b10c..04848bd0d6 100644 --- a/Marlin/src/inc/Conditionals_post.h +++ b/Marlin/src/inc/Conditionals_post.h @@ -513,103 +513,90 @@ #endif /** - * Temp Sensor defines + * Temp Sensor defines; set up pins as needed. */ -#define ANY_TEMP_SENSOR_IS(n) ( \ - n == TEMP_SENSOR_0 || n == TEMP_SENSOR_1 || n == TEMP_SENSOR_2 || n == TEMP_SENSOR_3 \ - || n == TEMP_SENSOR_4 || n == TEMP_SENSOR_5 || n == TEMP_SENSOR_6 || n == TEMP_SENSOR_7 \ - || n == TEMP_SENSOR_BED \ - || n == TEMP_SENSOR_PROBE \ - || n == TEMP_SENSOR_CHAMBER \ - || n == TEMP_SENSOR_COOLER \ - || n == TEMP_SENSOR_REDUNDANT ) -#if ANY_TEMP_SENSOR_IS(1000) - #define HAS_USER_THERMISTORS 1 -#endif -#undef ANY_TEMP_SENSOR_IS - // Usurp a sensor to do redundant readings #if TEMP_SENSOR_REDUNDANT #ifndef TEMP_SENSOR_REDUNDANT_SOURCE - #define TEMP_SENSOR_REDUNDANT_SOURCE 1 + #define TEMP_SENSOR_REDUNDANT_SOURCE E1 #endif #ifndef TEMP_SENSOR_REDUNDANT_TARGET - #define TEMP_SENSOR_REDUNDANT_TARGET 0 + #define TEMP_SENSOR_REDUNDANT_TARGET E0 #endif #if !PIN_EXISTS(TEMP_REDUNDANT) #ifndef TEMP_SENSOR_REDUNDANT_MAX_DIFF #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 #endif - #if TEMP_SENSOR_REDUNDANT_SOURCE == -5 + #if REDUNDANT_TEMP_MATCH(SOURCE, COOLER) #if !PIN_EXISTS(TEMP_COOLER) #error "TEMP_SENSOR_REDUNDANT_SOURCE set to COOLER requires TEMP_COOLER_PIN." #else #define TEMP_REDUNDANT_PIN TEMP_COOLER_PIN #endif - #elif TEMP_SENSOR_REDUNDANT_SOURCE == -4 + #elif REDUNDANT_TEMP_MATCH(SOURCE, PROBE) #if !PIN_EXISTS(TEMP_PROBE) #error "TEMP_SENSOR_REDUNDANT_SOURCE set to PROBE requires TEMP_PROBE_PIN." #else #define TEMP_REDUNDANT_PIN TEMP_PROBE_PIN #endif - #elif TEMP_SENSOR_REDUNDANT_SOURCE == -2 + #elif REDUNDANT_TEMP_MATCH(SOURCE, CHAMBER) #if !PIN_EXISTS(TEMP_CHAMBER) #error "TEMP_SENSOR_REDUNDANT_SOURCE set to CHAMBER requires TEMP_CHAMBER_PIN." #else #define TEMP_REDUNDANT_PIN TEMP_CHAMBER_PIN #endif - #elif TEMP_SENSOR_REDUNDANT_SOURCE == -1 + #elif REDUNDANT_TEMP_MATCH(SOURCE, BED) #if !PIN_EXISTS(TEMP_BED) #error "TEMP_SENSOR_REDUNDANT_SOURCE set to BED requires TEMP_BED_PIN." #else #define TEMP_REDUNDANT_PIN TEMP_BED_PIN #endif - #elif TEMP_SENSOR_REDUNDANT_SOURCE == 0 + #elif REDUNDANT_TEMP_MATCH(SOURCE, E0) #if !PIN_EXISTS(TEMP_0) - #error "TEMP_SENSOR_REDUNDANT_SOURCE set to 0 requires TEMP_0_PIN." + #error "TEMP_SENSOR_REDUNDANT_SOURCE set to E0 requires TEMP_0_PIN." #else #define TEMP_REDUNDANT_PIN TEMP_0_PIN #endif - #elif TEMP_SENSOR_REDUNDANT_SOURCE == 1 + #elif REDUNDANT_TEMP_MATCH(SOURCE, E1) #if !PIN_EXISTS(TEMP_1) - #error "TEMP_SENSOR_REDUNDANT_SOURCE set to 1 requires TEMP_1_PIN." + #error "TEMP_SENSOR_REDUNDANT_SOURCE set to E1 requires TEMP_1_PIN." #else #define TEMP_REDUNDANT_PIN TEMP_1_PIN #endif - #elif TEMP_SENSOR_REDUNDANT_SOURCE == 2 + #elif REDUNDANT_TEMP_MATCH(SOURCE, E2) #if !PIN_EXISTS(TEMP_2) - #error "TEMP_SENSOR_REDUNDANT_SOURCE set to 2 requires TEMP_2_PIN." + #error "TEMP_SENSOR_REDUNDANT_SOURCE set to E2 requires TEMP_2_PIN." #else #define TEMP_REDUNDANT_PIN TEMP_2_PIN #endif - #elif TEMP_SENSOR_REDUNDANT_SOURCE == 3 + #elif REDUNDANT_TEMP_MATCH(SOURCE, E3) #if !PIN_EXISTS(TEMP_3) - #error "TEMP_SENSOR_REDUNDANT_SOURCE set to 3 requires TEMP_3_PIN." + #error "TEMP_SENSOR_REDUNDANT_SOURCE set to E3 requires TEMP_3_PIN." #else #define TEMP_REDUNDANT_PIN TEMP_3_PIN #endif - #elif TEMP_SENSOR_REDUNDANT_SOURCE == 4 + #elif REDUNDANT_TEMP_MATCH(SOURCE, E4) #if !PIN_EXISTS(TEMP_4) - #error "TEMP_SENSOR_REDUNDANT_SOURCE set to 4 requires TEMP_4_PIN." + #error "TEMP_SENSOR_REDUNDANT_SOURCE set to E4 requires TEMP_4_PIN." #else #define TEMP_REDUNDANT_PIN TEMP_4_PIN #endif - #elif TEMP_SENSOR_REDUNDANT_SOURCE == 5 + #elif REDUNDANT_TEMP_MATCH(SOURCE, E5) #if !PIN_EXISTS(TEMP_5) - #error "TEMP_SENSOR_REDUNDANT_SOURCE set to 5 requires TEMP_5_PIN." + #error "TEMP_SENSOR_REDUNDANT_SOURCE set to E5 requires TEMP_5_PIN." #else #define TEMP_REDUNDANT_PIN TEMP_5_PIN #endif - #elif TEMP_SENSOR_REDUNDANT_SOURCE == 6 + #elif REDUNDANT_TEMP_MATCH(SOURCE, E6) #if !PIN_EXISTS(TEMP_6) - #error "TEMP_SENSOR_REDUNDANT_SOURCE set to 6 requires TEMP_6_PIN." + #error "TEMP_SENSOR_REDUNDANT_SOURCE set to E6 requires TEMP_6_PIN." #else #define TEMP_REDUNDANT_PIN TEMP_6_PIN #endif - #elif TEMP_SENSOR_REDUNDANT_SOURCE == 7 + #elif REDUNDANT_TEMP_MATCH(SOURCE, E7) #if !PIN_EXISTS(TEMP_7) - #error "TEMP_SENSOR_REDUNDANT_SOURCE set to 7 requires TEMP_7_PIN." + #error "TEMP_SENSOR_REDUNDANT_SOURCE set to E7 requires TEMP_7_PIN." #else #define TEMP_REDUNDANT_PIN TEMP_7_PIN #endif @@ -617,170 +604,13 @@ #endif #endif -#if TEMP_SENSOR_0 == -5 || TEMP_SENSOR_0 == -3 || TEMP_SENSOR_0 == -2 - #define TEMP_SENSOR_0_IS_MAX_TC 1 - #if TEMP_SENSOR_0 == -5 - #define TEMP_SENSOR_0_IS_MAX31865 1 - #define TEMP_SENSOR_0_MAX_TC_TMIN 0 - #define TEMP_SENSOR_0_MAX_TC_TMAX 1024 - #ifndef MAX31865_SENSOR_WIRES_0 - #define MAX31865_SENSOR_WIRES_0 2 - #endif - #elif TEMP_SENSOR_0 == -3 - #define TEMP_SENSOR_0_IS_MAX31855 1 - #define TEMP_SENSOR_0_MAX_TC_TMIN -270 - #define TEMP_SENSOR_0_MAX_TC_TMAX 1800 - #elif TEMP_SENSOR_0 == -2 - #define TEMP_SENSOR_0_IS_MAX6675 1 - #define TEMP_SENSOR_0_MAX_TC_TMIN 0 - #define TEMP_SENSOR_0_MAX_TC_TMAX 1024 - #endif -#elif TEMP_SENSOR_0 == -4 - #define TEMP_SENSOR_0_IS_AD8495 1 -#elif TEMP_SENSOR_0 == -1 - #define TEMP_SENSOR_0_IS_AD595 1 -#elif TEMP_SENSOR_0 > 0 - #define TEMP_SENSOR_0_IS_THERMISTOR 1 - #if TEMP_SENSOR_0 == 1000 - #define TEMP_SENSOR_0_IS_CUSTOM 1 - #elif TEMP_SENSOR_0 == 998 || TEMP_SENSOR_0 == 999 - #define TEMP_SENSOR_0_IS_DUMMY 1 - #endif -#else - #undef HEATER_0_MINTEMP - #undef HEATER_0_MAXTEMP -#endif - -#if TEMP_SENSOR_1 == -5 || TEMP_SENSOR_1 == -3 || TEMP_SENSOR_1 == -2 - #define TEMP_SENSOR_1_IS_MAX_TC 1 - #if TEMP_SENSOR_1 == -5 - #define TEMP_SENSOR_1_IS_MAX31865 1 - #define TEMP_SENSOR_1_MAX_TC_TMIN 0 - #define TEMP_SENSOR_1_MAX_TC_TMAX 1024 - #ifndef MAX31865_SENSOR_WIRES_1 - #define MAX31865_SENSOR_WIRES_1 2 - #endif - #elif TEMP_SENSOR_1 == -3 - #define TEMP_SENSOR_1_IS_MAX31855 1 - #define TEMP_SENSOR_1_MAX_TC_TMIN -270 - #define TEMP_SENSOR_1_MAX_TC_TMAX 1800 - #elif TEMP_SENSOR_1 == -2 - #define TEMP_SENSOR_1_IS_MAX6675 1 - #define TEMP_SENSOR_1_MAX_TC_TMIN 0 - #define TEMP_SENSOR_1_MAX_TC_TMAX 1024 - #endif - - #if TEMP_SENSOR_1 != TEMP_SENSOR_0 - #if TEMP_SENSOR_1 == -5 - #error "If MAX31865 Thermocouple (-5) is used for TEMP_SENSOR_1 then TEMP_SENSOR_0 must match." - #elif TEMP_SENSOR_1 == -3 - #error "If MAX31855 Thermocouple (-3) is used for TEMP_SENSOR_1 then TEMP_SENSOR_0 must match." - #elif TEMP_SENSOR_1 == -2 - #error "If MAX6675 Thermocouple (-2) is used for TEMP_SENSOR_1 then TEMP_SENSOR_0 must match." - #endif - #endif -#elif TEMP_SENSOR_1 == -4 - #define TEMP_SENSOR_1_IS_AD8495 1 -#elif TEMP_SENSOR_1 == -1 - #define TEMP_SENSOR_1_IS_AD595 1 -#elif TEMP_SENSOR_1 > 0 - #define TEMP_SENSOR_1_IS_THERMISTOR 1 - #if TEMP_SENSOR_1 == 1000 - #define TEMP_SENSOR_1_IS_CUSTOM 1 - #elif TEMP_SENSOR_1 == 998 || TEMP_SENSOR_1 == 999 - #define TEMP_SENSOR_1_IS_DUMMY 1 - #endif -#else - #undef HEATER_1_MINTEMP - #undef HEATER_1_MAXTEMP -#endif - -#if TEMP_SENSOR_REDUNDANT == -5 || TEMP_SENSOR_REDUNDANT == -3 || TEMP_SENSOR_REDUNDANT == -2 - #define TEMP_SENSOR_REDUNDANT_IS_MAX_TC 1 - - #if TEMP_SENSOR_REDUNDANT == -5 - #if TEMP_SENSOR_REDUNDANT_SOURCE != 0 && TEMP_SENSOR_REDUNDANT_SOURCE != 1 - #error "MAX31865 Thermocouples (-5) not supported for TEMP_SENSOR_REDUNDANT_SOURCE other than TEMP_SENSOR_0/TEMP_SENSOR_1 (0/1)." - #endif - - #define TEMP_SENSOR_REDUNDANT_IS_MAX31865 1 - #define TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN 0 - #define TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX 1024 - #elif TEMP_SENSOR_REDUNDANT == -3 - #if TEMP_SENSOR_REDUNDANT_SOURCE != 0 && TEMP_SENSOR_REDUNDANT_SOURCE != 1 - #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_REDUNDANT_SOURCE other than TEMP_SENSOR_0/TEMP_SENSOR_1 (0/1)." - #endif - - #define TEMP_SENSOR_REDUNDANT_IS_MAX31855 1 - #define TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN -270 - #define TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX 1800 - #elif TEMP_SENSOR_REDUNDANT == -2 - #if TEMP_SENSOR_REDUNDANT_SOURCE != 0 && TEMP_SENSOR_REDUNDANT_SOURCE != 1 - #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_REDUNDANT_SOURCE other than TEMP_SENSOR_0/TEMP_SENSOR_1 (0/1)." - #endif - - #define TEMP_SENSOR_REDUNDANT_IS_MAX6675 1 - #define TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN 0 - #define TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX 1024 - #endif - - // mimic setting up the source TEMP_SENSOR - #if TEMP_SENSOR_REDUNDANT_SOURCE == 0 - #define TEMP_SENSOR_0_MAX_TC_TMIN TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN - #define TEMP_SENSOR_0_MAX_TC_TMAX TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX - #ifndef MAX31865_SENSOR_WIRES_0 - #define MAX31865_SENSOR_WIRES_0 2 - #endif - #elif TEMP_SENSOR_REDUNDANT_SOURCE == 1 - #define TEMP_SENSOR_1_MAX_TC_TMIN TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN - #define TEMP_SENSOR_1_MAX_TC_TMAX TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX - #ifndef MAX31865_SENSOR_WIRES_1 - #define MAX31865_SENSOR_WIRES_1 2 - #endif - #endif - - #if (TEMP_SENSOR_0_IS_MAX_TC && TEMP_SENSOR_REDUNDANT != TEMP_SENSOR_0) || (TEMP_SENSOR_1_IS_MAX_TC && TEMP_SENSOR_REDUNDANT != TEMP_SENSOR_1) - #if TEMP_SENSOR_REDUNDANT == -5 - #error "If MAX31865 Thermocouple (-5) is used for TEMP_SENSOR_0/TEMP_SENSOR_1 then TEMP_SENSOR_REDUNDANT must match." - #elif TEMP_SENSOR_REDUNDANT == -3 - #error "If MAX31855 Thermocouple (-3) is used for TEMP_SENSOR_0/TEMP_SENSOR_1 then TEMP_SENSOR_REDUNDANT must match." - #elif TEMP_SENSOR_REDUNDANT == -2 - #error "If MAX6675 Thermocouple (-2) is used for TEMP_SENSOR_0/TEMP_SENSOR_1 then TEMP_SENSOR_REDUNDANT must match." - #endif - #endif -#elif TEMP_SENSOR_REDUNDANT == -4 - #define TEMP_SENSOR_REDUNDANT_IS_AD8495 1 -#elif TEMP_SENSOR_REDUNDANT == -1 - #define TEMP_SENSOR_REDUNDANT_IS_AD595 1 -#elif TEMP_SENSOR_REDUNDANT > 0 - #define TEMP_SENSOR_REDUNDANT_IS_THERMISTOR 1 - #if TEMP_SENSOR_REDUNDANT == 1000 - #define TEMP_SENSOR_REDUNDANT_IS_CUSTOM 1 - #elif TEMP_SENSOR_REDUNDANT == 998 || TEMP_SENSOR_REDUNDANT == 999 - #error "Dummy sensors are not supported for TEMP_SENSOR_REDUNDANT." - #endif -#endif - -#if TEMP_SENSOR_0_IS_MAX_TC || TEMP_SENSOR_1_IS_MAX_TC || TEMP_SENSOR_REDUNDANT_IS_MAX_TC - #define HAS_MAX_TC 1 -#endif -#if TEMP_SENSOR_0_IS_MAX6675 || TEMP_SENSOR_1_IS_MAX6675 || TEMP_SENSOR_REDUNDANT_IS_MAX6675 - #define HAS_MAX6675 1 -#endif -#if TEMP_SENSOR_0_IS_MAX31855 || TEMP_SENSOR_1_IS_MAX31855 || TEMP_SENSOR_REDUNDANT_IS_MAX31855 - #define HAS_MAX31855 1 -#endif -#if TEMP_SENSOR_0_IS_MAX31865 || TEMP_SENSOR_1_IS_MAX31865 || TEMP_SENSOR_REDUNDANT_IS_MAX31865 - #define HAS_MAX31865 1 -#endif - -// -// Compatibility layer for MAX (SPI) temp boards -// +/** + * Compatibility layer for MAX (SPI) temp boards + */ #if HAS_MAX_TC // Translate old _SS, _CS, _SCK, _DO, _DI, _MISO, and _MOSI PIN defines. - #if TEMP_SENSOR_0_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && TEMP_SENSOR_REDUNDANT_SOURCE == 1) + #if TEMP_SENSOR_0_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && REDUNDANT_TEMP_MATCH(SOURCE, E1)) #if !PIN_EXISTS(TEMP_0_CS) // SS, CS #if PIN_EXISTS(MAX6675_SS) @@ -849,7 +679,7 @@ #endif // TEMP_SENSOR_0_IS_MAX_TC - #if TEMP_SENSOR_1_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && TEMP_SENSOR_REDUNDANT_SOURCE == 1) + #if TEMP_SENSOR_1_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && REDUNDANT_TEMP_MATCH(SOURCE, E1)) #if !PIN_EXISTS(TEMP_1_CS) // SS2, CS2 #if PIN_EXISTS(MAX6675_SS2) @@ -938,203 +768,6 @@ #endif //HAS_MAX_TC -#if TEMP_SENSOR_2 == -4 - #define TEMP_SENSOR_2_IS_AD8495 1 -#elif TEMP_SENSOR_2 == -3 - #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_2." -#elif TEMP_SENSOR_2 == -2 - #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_2." -#elif TEMP_SENSOR_2 == -1 - #define TEMP_SENSOR_2_IS_AD595 1 -#elif TEMP_SENSOR_2 > 0 - #define TEMP_SENSOR_2_IS_THERMISTOR 1 - #if TEMP_SENSOR_2 == 1000 - #define TEMP_SENSOR_2_IS_CUSTOM 1 - #elif TEMP_SENSOR_2 == 998 || TEMP_SENSOR_2 == 999 - #define TEMP_SENSOR_2_IS_DUMMY 1 - #endif -#else - #undef HEATER_2_MINTEMP - #undef HEATER_2_MAXTEMP -#endif - -#if TEMP_SENSOR_3 == -4 - #define TEMP_SENSOR_3_IS_AD8495 1 -#elif TEMP_SENSOR_3 == -3 - #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_3." -#elif TEMP_SENSOR_3 == -2 - #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_3." -#elif TEMP_SENSOR_3 == -1 - #define TEMP_SENSOR_3_IS_AD595 1 -#elif TEMP_SENSOR_3 > 0 - #define TEMP_SENSOR_3_IS_THERMISTOR 1 - #if TEMP_SENSOR_3 == 1000 - #define TEMP_SENSOR_3_IS_CUSTOM 1 - #elif TEMP_SENSOR_3 == 998 || TEMP_SENSOR_3 == 999 - #define TEMP_SENSOR_3_IS_DUMMY 1 - #endif -#else - #undef HEATER_3_MINTEMP - #undef HEATER_3_MAXTEMP -#endif - -#if TEMP_SENSOR_4 == -4 - #define TEMP_SENSOR_4_IS_AD8495 1 -#elif TEMP_SENSOR_4 == -3 - #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_4." -#elif TEMP_SENSOR_4 == -2 - #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_4." -#elif TEMP_SENSOR_4 == -1 - #define TEMP_SENSOR_4_IS_AD595 1 -#elif TEMP_SENSOR_4 > 0 - #define TEMP_SENSOR_4_IS_THERMISTOR 1 - #if TEMP_SENSOR_4 == 1000 - #define TEMP_SENSOR_4_IS_CUSTOM 1 - #elif TEMP_SENSOR_4 == 998 || TEMP_SENSOR_4 == 999 - #define TEMP_SENSOR_4_IS_DUMMY 1 - #endif -#else - #undef HEATER_4_MINTEMP - #undef HEATER_4_MAXTEMP -#endif - -#if TEMP_SENSOR_5 == -4 - #define TEMP_SENSOR_5_IS_AD8495 1 -#elif TEMP_SENSOR_5 == -3 - #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_5." -#elif TEMP_SENSOR_5 == -2 - #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_5." -#elif TEMP_SENSOR_5 == -1 - #define TEMP_SENSOR_5_IS_AD595 1 -#elif TEMP_SENSOR_5 > 0 - #define TEMP_SENSOR_5_IS_THERMISTOR 1 - #if TEMP_SENSOR_5 == 1000 - #define TEMP_SENSOR_5_IS_CUSTOM 1 - #elif TEMP_SENSOR_5 == 998 || TEMP_SENSOR_5 == 999 - #define TEMP_SENSOR_5_IS_DUMMY 1 - #endif -#else - #undef HEATER_5_MINTEMP - #undef HEATER_5_MAXTEMP -#endif - -#if TEMP_SENSOR_6 == -4 - #define TEMP_SENSOR_6_IS_AD8495 1 -#elif TEMP_SENSOR_6 == -3 - #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_6." -#elif TEMP_SENSOR_6 == -2 - #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_6." -#elif TEMP_SENSOR_6 == -1 - #define TEMP_SENSOR_6_IS_AD595 1 -#elif TEMP_SENSOR_6 > 0 - #define TEMP_SENSOR_6_IS_THERMISTOR 1 - #if TEMP_SENSOR_6 == 1000 - #define TEMP_SENSOR_6_IS_CUSTOM 1 - #elif TEMP_SENSOR_6 == 998 || TEMP_SENSOR_6 == 999 - #define TEMP_SENSOR_6_IS_DUMMY 1 - #endif -#else - #undef HEATER_6_MINTEMP - #undef HEATER_6_MAXTEMP -#endif - -#if TEMP_SENSOR_7 == -4 - #define TEMP_SENSOR_7_IS_AD8495 1 -#elif TEMP_SENSOR_7 == -3 - #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_7." -#elif TEMP_SENSOR_7 == -2 - #error "MAX7775 Thermocouples (-2) not supported for TEMP_SENSOR_7." -#elif TEMP_SENSOR_7 == -1 - #define TEMP_SENSOR_7_IS_AD595 1 -#elif TEMP_SENSOR_7 > 0 - #define TEMP_SENSOR_7_IS_THERMISTOR 1 - #if TEMP_SENSOR_7 == 1000 - #define TEMP_SENSOR_7_IS_CUSTOM 1 - #elif TEMP_SENSOR_7 == 998 || TEMP_SENSOR_7 == 999 - #define TEMP_SENSOR_7_IS_DUMMY 1 - #endif -#else - #undef HEATER_7_MINTEMP - #undef HEATER_7_MAXTEMP -#endif - -#if TEMP_SENSOR_BED == -4 - #define TEMP_SENSOR_BED_IS_AD8495 1 -#elif TEMP_SENSOR_BED == -3 - #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_BED." -#elif TEMP_SENSOR_BED == -2 - #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_BED." -#elif TEMP_SENSOR_BED == -1 - #define TEMP_SENSOR_BED_IS_AD595 1 -#elif TEMP_SENSOR_BED > 0 - #define TEMP_SENSOR_BED_IS_THERMISTOR 1 - #if TEMP_SENSOR_BED == 1000 - #define TEMP_SENSOR_BED_IS_CUSTOM 1 - #elif TEMP_SENSOR_BED == 998 || TEMP_SENSOR_BED == 999 - #define TEMP_SENSOR_BED_IS_DUMMY 1 - #endif -#else - #undef BED_MINTEMP - #undef BED_MAXTEMP -#endif - -#if TEMP_SENSOR_CHAMBER == -4 - #define TEMP_SENSOR_CHAMBER_IS_AD8495 1 -#elif TEMP_SENSOR_CHAMBER == -3 - #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_CHAMBER." -#elif TEMP_SENSOR_CHAMBER == -2 - #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_CHAMBER." -#elif TEMP_SENSOR_CHAMBER == -1 - #define TEMP_SENSOR_CHAMBER_IS_AD595 1 -#elif TEMP_SENSOR_CHAMBER > 0 - #define TEMP_SENSOR_CHAMBER_IS_THERMISTOR 1 - #if TEMP_SENSOR_CHAMBER == 1000 - #define TEMP_SENSOR_CHAMBER_IS_CUSTOM 1 - #elif TEMP_SENSOR_CHAMBER == 998 || TEMP_SENSOR_CHAMBER == 999 - #define TEMP_SENSOR_CHAMBER_IS_DUMMY 1 - #endif -#else - #undef CHAMBER_MINTEMP - #undef CHAMBER_MAXTEMP -#endif - -#if TEMP_SENSOR_COOLER == -4 - #define TEMP_SENSOR_COOLER_IS_AD8495 1 -#elif TEMP_SENSOR_COOLER == -3 - #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_COOLER." -#elif TEMP_SENSOR_COOLER == -2 - #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_COOLER." -#elif TEMP_SENSOR_COOLER == -1 - #define TEMP_SENSOR_COOLER_IS_AD595 1 -#elif TEMP_SENSOR_COOLER > 0 - #define TEMP_SENSOR_COOLER_IS_THERMISTOR 1 - #if TEMP_SENSOR_COOLER == 1000 - #define TEMP_SENSOR_COOLER_IS_CUSTOM 1 - #elif TEMP_SENSOR_COOLER == 998 || TEMP_SENSOR_COOLER == 999 - #define TEMP_SENSOR_COOLER_IS_DUMMY 1 - #endif -#else - #undef COOLER_MINTEMP - #undef COOLER_MAXTEMP -#endif - -#if TEMP_SENSOR_PROBE == -4 - #define TEMP_SENSOR_PROBE_IS_AD8495 1 -#elif TEMP_SENSOR_PROBE == -3 - #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_PROBE." -#elif TEMP_SENSOR_PROBE == -2 - #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_PROBE." -#elif TEMP_SENSOR_PROBE == -1 - #define TEMP_SENSOR_PROBE_IS_AD595 1 -#elif TEMP_SENSOR_PROBE > 0 - #define TEMP_SENSOR_PROBE_IS_THERMISTOR 1 - #if TEMP_SENSOR_PROBE == 1000 - #define TEMP_SENSOR_PROBE_IS_CUSTOM 1 - #elif TEMP_SENSOR_PROBE == 998 || TEMP_SENSOR_PROBE == 999 - #define TEMP_SENSOR_PROBE_IS_DUMMY 1 - #endif -#endif - /** * X_DUAL_ENDSTOPS endstop reassignment */ @@ -2608,6 +2241,9 @@ #if HAS_ADC_TEST(COOLER) #define HAS_TEMP_ADC_COOLER 1 #endif +#if HAS_ADC_TEST(BOARD) + #define HAS_TEMP_ADC_BOARD 1 +#endif #if HAS_ADC_TEST(REDUNDANT) #define HAS_TEMP_ADC_REDUNDANT 1 #endif @@ -2628,6 +2264,9 @@ #if HAS_TEMP(COOLER) #define HAS_TEMP_COOLER 1 #endif +#if HAS_TEMP(BOARD) + #define HAS_TEMP_BOARD 1 +#endif #if HAS_TEMP(REDUNDANT) #define HAS_TEMP_REDUNDANT 1 #endif @@ -2699,7 +2338,8 @@ #if HAS_HEATED_BED || HAS_TEMP_CHAMBER #define BED_OR_CHAMBER 1 #endif -#if HAS_TEMP_HOTEND || BED_OR_CHAMBER || HAS_TEMP_PROBE || HAS_TEMP_COOLER + +#if HAS_TEMP_HOTEND || BED_OR_CHAMBER || HAS_TEMP_PROBE || HAS_TEMP_COOLER || HAS_TEMP_BOARD #define HAS_TEMP_SENSOR 1 #endif @@ -2837,9 +2477,6 @@ #endif #undef _NOT_E_AUTO #undef _HAS_FAN -#if PIN_EXISTS(CONTROLLER_FAN) - #define HAS_CONTROLLER_FAN 1 -#endif #if BED_OR_CHAMBER || HAS_FAN0 #define BED_OR_CHAMBER_OR_FAN 1 @@ -2916,6 +2553,27 @@ #define FAST_PWM_FAN_FREQUENCY ((F_CPU) / (2 * 255 * 1)) // Fan frequency default #endif +/** + * Controller Fan Settings + */ +#if PIN_EXISTS(CONTROLLER_FAN) + #define HAS_CONTROLLER_FAN 1 + #if CONTROLLER_FAN_MIN_BOARD_TEMP + #define HAS_CONTROLLER_FAN_MIN_BOARD_TEMP 1 + #endif +#endif + +#if HAS_CONTROLLER_FAN + #if ENABLED(CONTROLLER_FAN_USE_BOARD_TEMP) + #define HAS_CONTROLLER_FAN_BOARD_TEMP_TRIGGER 1 + #ifndef CONTROLLER_FAN_TRIGGER_TEMP + #define CONTROLLER_FAN_TRIGGER_TEMP 30 + #endif + #else + #undef CONTROLLER_FAN_TRIGGER_TEMP + #endif +#endif + // Servos #if PIN_EXISTS(SERVO0) && NUM_SERVOS > 0 #define HAS_SERVO_0 1 diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index a953e7cab8..9b731a7c73 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -585,6 +585,10 @@ #error "TEMP_SENSOR_1_AS_REDUNDANT is now TEMP_SENSOR_REDUNDANT, with associated TEMP_SENSOR_REDUNDANT_* config." #elif defined(MAX_REDUNDANT_TEMP_SENSOR_DIFF) #error "MAX_REDUNDANT_TEMP_SENSOR_DIFF is now TEMP_SENSOR_REDUNDANT_MAX_DIFF" +#elif MOTHERBOARD == BOARD_DUE3DOM_MINI && PIN_EXISTS(TEMP_2) && DISABLED(TEMP_SENSOR_BOARD) + #warning "Onboard temperature sensor for BOARD_DUE3DOM_MINI has moved from TEMP_SENSOR_2 (TEMP_2_PIN) to TEMP_SENSOR_BOARD (TEMP_BOARD_PIN)." +#elif MOTHERBOARD == BOARD_BTT_SKR_E3_TURBO && PIN_EXISTS(TEMP_2) && DISABLED(TEMP_SENSOR_BOARD) + #warning "Onboard temperature sensor for BOARD_BTT_SKR_E3_TURBO has moved from TEMP_SENSOR_2 (TEMP_2_PIN) to TEMP_SENSOR_BOARD (TEMP_BOARD_PIN)." #endif constexpr float arm[] = AXIS_RELATIVE_MODES; @@ -1985,6 +1989,8 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS #error "TEMP_SENSOR_CHAMBER 1000 requires CHAMBER_PULLUP_RESISTOR_OHMS, CHAMBER_RESISTANCE_25C_OHMS and CHAMBER_BETA in Configuration_adv.h." #elif TEMP_SENSOR_PROBE_IS_CUSTOM && !(defined(PROBE_PULLUP_RESISTOR_OHMS) && defined(PROBE_RESISTANCE_25C_OHMS) && defined(PROBE_BETA)) #error "TEMP_SENSOR_PROBE 1000 requires PROBE_PULLUP_RESISTOR_OHMS, PROBE_RESISTANCE_25C_OHMS and PROBE_BETA in Configuration_adv.h." +#elif TEMP_SENSOR_BOARD_IS_CUSTOM && !(defined(BOARD_PULLUP_RESISTOR_OHMS) && defined(BOARD_RESISTANCE_25C_OHMS) && defined(BOARD_BETA)) + #error "TEMP_SENSOR_BOARD 1000 requires BOARD_PULLUP_RESISTOR_OHMS, BOARD_RESISTANCE_25C_OHMS and BOARD_BETA in Configuration_adv.h." #elif TEMP_SENSOR_REDUNDANT_IS_CUSTOM && !(defined(REDUNDANT_PULLUP_RESISTOR_OHMS) && defined(REDUNDANT_RESISTANCE_25C_OHMS) && defined(REDUNDANT_BETA)) #error "TEMP_SENSOR_REDUNDANT 1000 requires REDUNDANT_PULLUP_RESISTOR_OHMS, REDUNDANT_RESISTANCE_25C_OHMS and REDUNDANT_BETA in Configuration_adv.h." #endif @@ -1992,14 +1998,14 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS /** * Required MAX31865 settings */ -#if TEMP_SENSOR_0_IS_MAX31865 || (TEMP_SENSOR_REDUNDANT_IS_MAX31865 && TEMP_SENSOR_REDUNDANT_SOURCE == 0) +#if TEMP_SENSOR_0_IS_MAX31865 || (TEMP_SENSOR_REDUNDANT_IS_MAX31865 && REDUNDANT_TEMP_MATCH(SOURCE, E0)) #if !defined(MAX31865_SENSOR_WIRES_0) || !WITHIN(MAX31865_SENSOR_WIRES_0, 2, 4) #error "MAX31865_SENSOR_WIRES_0 must be defined as an integer between 2 and 4." #elif !defined(MAX31865_SENSOR_OHMS_0) || !defined(MAX31865_CALIBRATION_OHMS_0) #error "MAX31865_SENSOR_OHMS_0 and MAX31865_CALIBRATION_OHMS_0 must be set if TEMP_SENSOR_0/TEMP_SENSOR_REDUNDANT is MAX31865." #endif #endif -#if TEMP_SENSOR_1_IS_MAX31865 || (TEMP_SENSOR_REDUNDANT_IS_MAX31865 && TEMP_SENSOR_REDUNDANT_SOURCE == 1) +#if TEMP_SENSOR_1_IS_MAX31865 || (TEMP_SENSOR_REDUNDANT_IS_MAX31865 && REDUNDANT_TEMP_MATCH(SOURCE, E1)) #if !defined(MAX31865_SENSOR_WIRES_1) || !WITHIN(MAX31865_SENSOR_WIRES_1, 2, 4) #error "MAX31865_SENSOR_WIRES_1 must be defined as an integer between 2 and 4." #elif !defined(MAX31865_SENSOR_OHMS_1) || !defined(MAX31865_CALIBRATION_OHMS_1) @@ -2015,56 +2021,52 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS #error "TEMP_SENSOR_REDUNDANT requires TEMP_SENSOR_REDUNDANT_SOURCE." #elif !defined(TEMP_SENSOR_REDUNDANT_TARGET) #error "TEMP_SENSOR_REDUNDANT requires TEMP_SENSOR_REDUNDANT_TARGET." - #elif TEMP_SENSOR_REDUNDANT_SOURCE == TEMP_SENSOR_REDUNDANT_TARGET + #elif REDUNDANT_TEMP_MATCH(SOURCE, TEMP_SENSOR_REDUNDANT_TARGET) #error "TEMP_SENSOR_REDUNDANT_SOURCE can't be the same as TEMP_SENSOR_REDUNDANT_TARGET." - #elif TEMP_SENSOR_REDUNDANT_SOURCE < -5 || TEMP_SENSOR_REDUNDANT_SOURCE > 7 - #error "TEMP_SENSOR_REDUNDANT_SOURCE must be between -5 and 7." - #elif TEMP_SENSOR_REDUNDANT_TARGET < -5 || TEMP_SENSOR_REDUNDANT_TARGET > 7 - #error "TEMP_SENSOR_REDUNDANT_TARGET must be between -5 and 7." - #elif TEMP_SENSOR_REDUNDANT_SOURCE == -3 - #error "TEMP_SENSOR_REDUNDANT_SOURCE can't be -3 (not used)." - #elif TEMP_SENSOR_REDUNDANT_TARGET == -3 - #error "TEMP_SENSOR_REDUNDANT_TARGET can't be -3 (not used)." #elif HAS_MULTI_HOTEND && TEMP_SENSOR_REDUNDANT_SOURCE < HOTENDS - #error "TEMP_SENSOR_REDUNDANT_SOURCE must be after the last TEMP_SENSOR used with a hotend; you can't use a sensor in the middle of two hotends." - #endif - - #if TEMP_SENSOR_REDUNDANT_SOURCE == 0 && HAS_HOTEND - #error "TEMP_SENSOR_REDUNDANT_SOURCE can not be 0 if a hotend is used. E0 always uses TEMP_SENSOR_0." - #elif TEMP_SENSOR_REDUNDANT_SOURCE == -5 && HAS_TEMP_COOLER - #error "TEMP_SENSOR_REDUNDANT_SOURCE can't be Cooler (-5): TEMP_SENSOR_COOLER has already defined the sensor." - #elif TEMP_SENSOR_REDUNDANT_SOURCE == -4 && HAS_TEMP_PROBE - #error "TEMP_SENSOR_REDUNDANT_SOURCE can't be Probe (-4): TEMP_SENSOR_PROBE has already defined the sensor." - #elif TEMP_SENSOR_REDUNDANT_SOURCE == -2 && HAS_TEMP_CHAMBER - #error "TEMP_SENSOR_REDUNDANT_SOURCE can't be Chamber (-2): TEMP_SENSOR_CHAMBER has already defined the sensor." - #elif TEMP_SENSOR_REDUNDANT_SOURCE == -1 && HAS_TEMP_BED - #error "TEMP_SENSOR_REDUNDANT_SOURCE can't be Bed (-1): TEMP_SENSOR_BED has already defined the sensor." - #endif - - #if TEMP_SENSOR_REDUNDANT_TARGET == 0 && !PIN_EXISTS(TEMP_0) - #error "TEMP_SENSOR_REDUNDANT_TARGET can't be E0 (0): requires TEMP_0_PIN" - #elif TEMP_SENSOR_REDUNDANT_TARGET == 1 && !PIN_EXISTS(TEMP_1) - #error "TEMP_SENSOR_REDUNDANT_TARGET can't be E1 (1): requires TEMP_1_PIN" - #elif TEMP_SENSOR_REDUNDANT_TARGET == 2 && !PIN_EXISTS(TEMP_2) - #error "TEMP_SENSOR_REDUNDANT_TARGET can't be E2 (2): requires TEMP_2_PIN" - #elif TEMP_SENSOR_REDUNDANT_TARGET == 3 && !PIN_EXISTS(TEMP_3) - #error "TEMP_SENSOR_REDUNDANT_TARGET can't be E3 (3): requires TEMP_3_PIN" - #elif TEMP_SENSOR_REDUNDANT_TARGET == 4 && !PIN_EXISTS(TEMP_4) - #error "TEMP_SENSOR_REDUNDANT_TARGET can't be E4 (4): requires TEMP_4_PIN" - #elif TEMP_SENSOR_REDUNDANT_TARGET == 5 && !PIN_EXISTS(TEMP_5) - #error "TEMP_SENSOR_REDUNDANT_TARGET can't be E5 (5): requires TEMP_5_PIN" - #elif TEMP_SENSOR_REDUNDANT_TARGET == 6 && !PIN_EXISTS(TEMP_6) - #error "TEMP_SENSOR_REDUNDANT_TARGET can't be E6 (6): requires TEMP_6_PIN" - #elif TEMP_SENSOR_REDUNDANT_TARGET == 7 && !PIN_EXISTS(TEMP_7) - #error "TEMP_SENSOR_REDUNDANT_TARGET can't be E7 (7): requires TEMP_7_PIN" - #elif TEMP_SENSOR_REDUNDANT_TARGET == -1 && !PIN_EXISTS(TEMP_BED) - #error "TEMP_SENSOR_REDUNDANT_TARGET can't be Bed (-1): requires TEMP_BED_PIN" - #elif TEMP_SENSOR_REDUNDANT_TARGET == -2 && !PIN_EXISTS(TEMP_CHAMBER) - #error "TEMP_SENSOR_REDUNDANT_TARGET can't be Chamber (-2): requires TEMP_CHAMBER_PIN" - #elif TEMP_SENSOR_REDUNDANT_TARGET == -4 && !PIN_EXISTS(TEMP_PROBE) - #error "TEMP_SENSOR_REDUNDANT_TARGET can't be Probe (-4): requires TEMP_PROBE_PIN" - #elif TEMP_SENSOR_REDUNDANT_TARGET == -5 && !PIN_EXISTS(TEMP_COOLER) - #error "TEMP_SENSOR_REDUNDANT_TARGET can't be Cooler (-5): requires TEMP_COOLER_PIN" + #error "TEMP_SENSOR_REDUNDANT_SOURCE must be after the last used hotend TEMP_SENSOR." + #endif + + #if REDUNDANT_TEMP_MATCH(SOURCE, E0) && HAS_HOTEND + #error "TEMP_SENSOR_REDUNDANT_SOURCE can't be E0 if a hotend is used. E0 always uses TEMP_SENSOR_0." + #elif REDUNDANT_TEMP_MATCH(SOURCE, COOLER) && HAS_TEMP_COOLER + #error "TEMP_SENSOR_REDUNDANT_SOURCE can't be COOLER. TEMP_SENSOR_COOLER is in use." + #elif REDUNDANT_TEMP_MATCH(SOURCE, PROBE) && HAS_TEMP_PROBE + #error "TEMP_SENSOR_REDUNDANT_SOURCE can't be PROBE. TEMP_SENSOR_PROBE is in use." + #elif REDUNDANT_TEMP_MATCH(SOURCE, BOARD) && HAS_TEMP_BOARD + #error "TEMP_SENSOR_REDUNDANT_SOURCE can't be BOARD. TEMP_SENSOR_BOARD is in use." + #elif REDUNDANT_TEMP_MATCH(SOURCE, CHAMBER) && HAS_TEMP_CHAMBER + #error "TEMP_SENSOR_REDUNDANT_SOURCE can't be CHAMBER. TEMP_SENSOR_CHAMBER is in use." + #elif REDUNDANT_TEMP_MATCH(SOURCE, BED) && HAS_TEMP_BED + #error "TEMP_SENSOR_REDUNDANT_SOURCE can't be BED. TEMP_SENSOR_BED is in use." + #endif + + #if REDUNDANT_TEMP_MATCH(TARGET, E0) && !PIN_EXISTS(TEMP_0) + #error "TEMP_SENSOR_REDUNDANT_TARGET can't be E0 without TEMP_0_PIN defined." + #elif REDUNDANT_TEMP_MATCH(TARGET, E1) && !PIN_EXISTS(TEMP_1) + #error "TEMP_SENSOR_REDUNDANT_TARGET can't be E1 without TEMP_1_PIN defined." + #elif REDUNDANT_TEMP_MATCH(TARGET, E2) && !PIN_EXISTS(TEMP_2) + #error "TEMP_SENSOR_REDUNDANT_TARGET can't be E2 without TEMP_2_PIN defined." + #elif REDUNDANT_TEMP_MATCH(TARGET, E3) && !PIN_EXISTS(TEMP_3) + #error "TEMP_SENSOR_REDUNDANT_TARGET can't be E3 without TEMP_3_PIN defined." + #elif REDUNDANT_TEMP_MATCH(TARGET, E4) && !PIN_EXISTS(TEMP_4) + #error "TEMP_SENSOR_REDUNDANT_TARGET can't be E4 without TEMP_4_PIN defined." + #elif REDUNDANT_TEMP_MATCH(TARGET, E5) && !PIN_EXISTS(TEMP_5) + #error "TEMP_SENSOR_REDUNDANT_TARGET can't be E5 without TEMP_5_PIN defined." + #elif REDUNDANT_TEMP_MATCH(TARGET, E6) && !PIN_EXISTS(TEMP_6) + #error "TEMP_SENSOR_REDUNDANT_TARGET can't be E6 without TEMP_6_PIN defined." + #elif REDUNDANT_TEMP_MATCH(TARGET, E7) && !PIN_EXISTS(TEMP_7) + #error "TEMP_SENSOR_REDUNDANT_TARGET can't be E7 without TEMP_7_PIN defined." + #elif REDUNDANT_TEMP_MATCH(TARGET, BED) && !PIN_EXISTS(TEMP_BED) + #error "TEMP_SENSOR_REDUNDANT_TARGET can't be BED without TEMP_BED_PIN defined." + #elif REDUNDANT_TEMP_MATCH(TARGET, CHAMBER) && !PIN_EXISTS(TEMP_CHAMBER) + #error "TEMP_SENSOR_REDUNDANT_TARGET can't be CHAMBER without TEMP_CHAMBER_PIN defined." + #elif REDUNDANT_TEMP_MATCH(TARGET, BOARD) && !PIN_EXISTS(TEMP_BOARD) + #error "TEMP_SENSOR_REDUNDANT_TARGET can't be BOARD without TEMP_BOARD_PIN defined." + #elif REDUNDANT_TEMP_MATCH(TARGET, PROBE) && !PIN_EXISTS(TEMP_PROBE) + #error "TEMP_SENSOR_REDUNDANT_TARGET can't be PROBE without TEMP_PROBE_PIN defined." + #elif REDUNDANT_TEMP_MATCH(TARGET, COOLER) && !PIN_EXISTS(TEMP_COOLER) + #error "TEMP_SENSOR_REDUNDANT_TARGET can't be COOLER without TEMP_COOLER_PIN defined." #endif #if TEMP_SENSOR_REDUNDANT_IS_MAX_TC && REDUNDANT_TEMP_MATCH(SOURCE, E0) && !PIN_EXISTS(TEMP_0_CS) @@ -2235,6 +2237,28 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS #endif #endif +#if TEMP_SENSOR_PROBE + #if !PIN_EXISTS(TEMP_PROBE) + #error "TEMP_SENSOR_PROBE requires TEMP_PROBE_PIN." + #elif !HAS_TEMP_ADC_PROBE + #error "TEMP_PROBE_PIN must be an ADC pin." + #elif DISABLED(FIX_MOUNTED_PROBE) + #error "TEMP_SENSOR_PROBE shouldn't be set without FIX_MOUNTED_PROBE." + #endif +#endif + +#if TEMP_SENSOR_BOARD + #if !PIN_EXISTS(TEMP_BOARD) + #error "TEMP_SENSOR_BOARD requires TEMP_BOARD_PIN." + #elif !HAS_TEMP_ADC_BOARD + #error "TEMP_BOARD_PIN must be an ADC pin." + #elif ENABLED(THERMAL_PROTECTION_BOARD) && (!defined(BOARD_MINTEMP) || !defined(BOARD_MAXTEMP)) + #error "THERMAL_PROTECTION_BOARD requires BOARD_MINTEMP and BOARD_MAXTEMP." + #endif +#elif CONTROLLER_FAN_MIN_BOARD_TEMP + #error "CONTROLLER_FAN_MIN_BOARD_TEMP requires TEMP_SENSOR_BOARD." +#endif + #if ENABLED(LASER_COOLANT_FLOW_METER) && !(PIN_EXISTS(FLOWMETER) && ENABLED(LASER_FEATURE)) #error "LASER_COOLANT_FLOW_METER requires FLOWMETER_PIN and LASER_FEATURE." #endif diff --git a/Marlin/src/lcd/thermistornames.h b/Marlin/src/lcd/thermistornames.h index f9f91ac49a..4f6dd23ece 100644 --- a/Marlin/src/lcd/thermistornames.h +++ b/Marlin/src/lcd/thermistornames.h @@ -128,6 +128,8 @@ #define THERMISTOR_NAME "Pt100 1K" #elif THERMISTOR_ID == 666 #define THERMISTOR_NAME "Einstart S" +#elif THERMISTOR_ID == 2000 + #define THERMISTOR_NAME "TDK NTCG104LH104JT1" // High Temperature thermistors #elif THERMISTOR_ID == 61 diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp index 56322135a4..52d0dfb56e 100644 --- a/Marlin/src/module/temperature.cpp +++ b/Marlin/src/module/temperature.cpp @@ -58,8 +58,8 @@ #endif // MAX TC related macros -#define TEMP_SENSOR_IS_MAX(n, M) (ENABLED(TEMP_SENSOR_##n##_IS_MAX##M) || (ENABLED(TEMP_SENSOR_REDUNDANT_IS_MAX##M) && TEMP_SENSOR_REDUNDANT_SOURCE == (n))) -#define TEMP_SENSOR_IS_ANY_MAX_TC(n) (ENABLED(TEMP_SENSOR_##n##_IS_MAX_TC) || (ENABLED(TEMP_SENSOR_REDUNDANT_IS_MAX_TC) && TEMP_SENSOR_REDUNDANT_SOURCE == n)) +#define TEMP_SENSOR_IS_MAX(n, M) (ENABLED(TEMP_SENSOR_##n##_IS_MAX##M) || (ENABLED(TEMP_SENSOR_REDUNDANT_IS_MAX##M) && REDUNDANT_TEMP_MATCH(SOURCE, E##n))) +#define TEMP_SENSOR_IS_ANY_MAX_TC(n) (ENABLED(TEMP_SENSOR_##n##_IS_MAX_TC) || (ENABLED(TEMP_SENSOR_REDUNDANT_IS_MAX_TC) && REDUNDANT_TEMP_MATCH(SOURCE, E##n))) // LIB_MAX6675 can be added to the build_flags in platformio.ini to use a user-defined library // If LIB_MAX6675 is not on the build_flags then raw SPI reads will be used. @@ -281,7 +281,7 @@ const char str_t_thermal_runaway[] PROGMEM = STR_T_THERMAL_RUNAWAY, #endif #if HAS_TEMP_REDUNDANT - redundant_temp_info_t Temperature::temp_redundant; + redundant_info_t Temperature::temp_redundant; #endif #if ENABLED(AUTO_POWER_E_FANS) @@ -455,6 +455,14 @@ const char str_t_thermal_runaway[] PROGMEM = STR_T_THERMAL_RUNAWAY, probe_info_t Temperature::temp_probe; // = { 0 } #endif +#if HAS_TEMP_BOARD + board_info_t Temperature::temp_board; // = { 0 } + #if ENABLED(THERMAL_PROTECTION_BOARD) + int16_t Temperature::mintemp_raw_BOARD = TEMP_SENSOR_BOARD_RAW_LO_TEMP, + Temperature::maxtemp_raw_BOARD = TEMP_SENSOR_BOARD_RAW_HI_TEMP; + #endif +#endif + #if ENABLED(PREVENT_COLD_EXTRUSION) bool Temperature::allow_cold_extrude = false; celsius_t Temperature::extrude_min_temp = EXTRUDE_MINTEMP; @@ -956,14 +964,26 @@ void Temperature::_temp_error(const heater_id_t heater_id, PGM_P const serial_ms SERIAL_ERROR_START(); SERIAL_ECHOPGM_P(serial_msg); SERIAL_ECHOPGM(STR_STOPPED_HEATER); - if (heater_id >= 0) - SERIAL_ECHO(heater_id); - else if (TERN0(HAS_HEATED_CHAMBER, heater_id == H_CHAMBER)) - SERIAL_ECHOPGM(STR_HEATER_CHAMBER); - else if (TERN0(HAS_COOLER, heater_id == H_COOLER)) - SERIAL_ECHOPGM(STR_COOLER); - else - SERIAL_ECHOPGM(STR_HEATER_BED); + + heater_id_t real_heater_id = heater_id; + + #if HAS_TEMP_REDUNDANT + if (heater_id == H_REDUNDANT) { + SERIAL_ECHOPGM(STR_REDUNDANT); // print redundant and cascade to print target, too. + real_heater_id = (heater_id_t)HEATER_ID(TEMP_SENSOR_REDUNDANT_TARGET); + } + #endif + + switch (real_heater_id) { + OPTCODE(HAS_TEMP_COOLER, case H_COOLER: SERIAL_ECHOPGM(STR_COOLER); break) + OPTCODE(HAS_TEMP_PROBE, case H_PROBE: SERIAL_ECHOPGM(STR_PROBE); break) + OPTCODE(HAS_TEMP_BOARD, case H_BOARD: SERIAL_ECHOPGM(STR_MOTHERBOARD); break) + OPTCODE(HAS_TEMP_CHAMBER, case H_CHAMBER: SERIAL_ECHOPGM(STR_HEATER_CHAMBER); break) + OPTCODE(HAS_TEMP_BED, case H_BED: SERIAL_ECHOPGM(STR_HEATER_BED); break) + default: + if (real_heater_id >= 0) + SERIAL_ECHOLNPAIR("E", real_heater_id); + } SERIAL_EOL(); } @@ -1322,7 +1342,7 @@ void Temperature::manage_heater() { #if HAS_TEMP_REDUNDANT // Make sure measured temperatures are close together if (ABS(degRedundantTarget() - degRedundant()) > TEMP_SENSOR_REDUNDANT_MAX_DIFF) - _temp_error((heater_id_t)TEMP_SENSOR_REDUNDANT_TARGET, PSTR(STR_REDUNDANCY), GET_TEXT(MSG_ERR_REDUNDANT_TEMP)); + _temp_error((heater_id_t)HEATER_ID(TEMP_SENSOR_REDUNDANT_TARGET), PSTR(STR_REDUNDANCY), GET_TEXT(MSG_ERR_REDUNDANT_TEMP)); #endif #if HAS_AUTO_FAN @@ -1682,6 +1702,9 @@ void Temperature::manage_heater() { #if TEMP_SENSOR_PROBE_IS_CUSTOM { true, 0, 0, PROBE_PULLUP_RESISTOR_OHMS, PROBE_RESISTANCE_25C_OHMS, 0, 0, PROBE_BETA, 0 }, #endif + #if TEMP_SENSOR_BOARD_IS_CUSTOM + { true, 0, 0, BOARD_PULLUP_RESISTOR_OHMS, BOARD_RESISTANCE_25C_OHMS, 0, 0, BOARD_BETA, 0 }, + #endif #if TEMP_SENSOR_REDUNDANT_IS_CUSTOM { true, 0, 0, REDUNDANT_PULLUP_RESISTOR_OHMS, REDUNDANT_RESISTANCE_25C_OHMS, 0, 0, REDUNDANT_BETA, 0 }, #endif @@ -1717,6 +1740,7 @@ void Temperature::manage_heater() { TERN_(TEMP_SENSOR_CHAMBER_IS_CUSTOM, t_index == CTI_CHAMBER ? PSTR("CHAMBER") :) TERN_(TEMP_SENSOR_COOLER_IS_CUSTOM, t_index == CTI_COOLER ? PSTR("COOLER") :) TERN_(TEMP_SENSOR_PROBE_IS_CUSTOM, t_index == CTI_PROBE ? PSTR("PROBE") :) + TERN_(TEMP_SENSOR_BOARD_IS_CUSTOM, t_index == CTI_BOARD ? PSTR("BOARD") :) TERN_(TEMP_SENSOR_REDUNDANT_IS_CUSTOM, t_index == CTI_REDUNDANT ? PSTR("REDUNDANT") :) nullptr ); @@ -1952,14 +1976,32 @@ void Temperature::manage_heater() { } #endif // HAS_TEMP_PROBE +#if HAS_TEMP_BOARD + // For motherboard temperature measurement. + celsius_float_t Temperature::analog_to_celsius_board(const int16_t raw) { + #if TEMP_SENSOR_BOARD_IS_CUSTOM + return user_thermistor_to_deg_c(CTI_BOARD, raw); + #elif TEMP_SENSOR_BOARD_IS_THERMISTOR + SCAN_THERMISTOR_TABLE(TEMPTABLE_BOARD, TEMPTABLE_BOARD_LEN); + #elif TEMP_SENSOR_BOARD_IS_AD595 + return TEMP_AD595(raw); + #elif TEMP_SENSOR_BOARD_IS_AD8495 + return TEMP_AD8495(raw); + #else + UNUSED(raw); + return 0; + #endif + } +#endif // HAS_TEMP_BOARD + #if HAS_TEMP_REDUNDANT // For redundant temperature measurement. celsius_float_t Temperature::analog_to_celsius_redundant(const int16_t raw) { #if TEMP_SENSOR_REDUNDANT_IS_CUSTOM return user_thermistor_to_deg_c(CTI_REDUNDANT, raw); - #elif TEMP_SENSOR_REDUNDANT_IS_MAX_TC && TEMP_SENSOR_REDUNDANT_SOURCE == 0 + #elif TEMP_SENSOR_REDUNDANT_IS_MAX_TC && REDUNDANT_TEMP_MATCH(SOURCE, E0) return TERN(TEMP_SENSOR_REDUNDANT_IS_MAX31865, max31865_0.temperature((uint16_t)raw), raw * 0.25); - #elif TEMP_SENSOR_REDUNDANT_IS_MAX_TC && TEMP_SENSOR_REDUNDANT_SOURCE == 1 + #elif TEMP_SENSOR_REDUNDANT_IS_MAX_TC && REDUNDANT_TEMP_MATCH(SOURCE, E1) return TERN(TEMP_SENSOR_REDUNDANT_IS_MAX31865, max31865_1.temperature((uint16_t)raw), raw * 0.25); #elif TEMP_SENSOR_REDUNDANT_IS_THERMISTOR SCAN_THERMISTOR_TABLE(TEMPTABLE_REDUNDANT, TEMPTABLE_REDUNDANT_LEN); @@ -1992,7 +2034,7 @@ void Temperature::updateTemperaturesFromRawValues() { TERN_(TEMP_SENSOR_0_IS_MAX_TC, temp_hotend[0].raw = READ_MAX_TC(0)); TERN_(TEMP_SENSOR_1_IS_MAX_TC, temp_hotend[1].raw = READ_MAX_TC(1)); - TERN_(TEMP_SENSOR_REDUNDANT_IS_MAX_TC, temp_redundant.raw = READ_MAX_TC(TEMP_SENSOR_REDUNDANT_SOURCE)); + TERN_(TEMP_SENSOR_REDUNDANT_IS_MAX_TC, temp_redundant.raw = READ_MAX_TC(HEATER_ID(TEMP_SENSOR_REDUNDANT_SOURCE))); #if HAS_HOTEND HOTEND_LOOP() temp_hotend[e].celsius = analog_to_celsius_hotend(temp_hotend[e].raw, e); @@ -2002,6 +2044,7 @@ void Temperature::updateTemperaturesFromRawValues() { TERN_(HAS_TEMP_CHAMBER, temp_chamber.celsius = analog_to_celsius_chamber(temp_chamber.raw)); TERN_(HAS_TEMP_COOLER, temp_cooler.celsius = analog_to_celsius_cooler(temp_cooler.raw)); TERN_(HAS_TEMP_PROBE, temp_probe.celsius = analog_to_celsius_probe(temp_probe.raw)); + TERN_(HAS_TEMP_BOARD, temp_board.celsius = analog_to_celsius_board(temp_board.raw)); TERN_(HAS_TEMP_REDUNDANT, temp_redundant.celsius = analog_to_celsius_redundant(temp_redundant.raw)); TERN_(FILAMENT_WIDTH_SENSOR, filwidth.update_measured_mm()); @@ -2049,23 +2092,28 @@ void Temperature::updateTemperaturesFromRawValues() { #endif // HAS_HOTEND + #define TP_CMP(S,A,B) (TEMPDIR(S) < 0 ? ((A)<(B)) : ((A)>(B))) #if ENABLED(THERMAL_PROTECTION_BED) - #define BEDCMP(A,B) (TEMPDIR(BED) < 0 ? ((A)<(B)) : ((A)>(B))) - if (BEDCMP(temp_bed.raw, maxtemp_raw_BED)) max_temp_error(H_BED); - if (temp_bed.target > 0 && BEDCMP(mintemp_raw_BED, temp_bed.raw)) min_temp_error(H_BED); + if (TP_CMP(BED, temp_bed.raw, maxtemp_raw_BED)) max_temp_error(H_BED); + if (temp_bed.target > 0 && TP_CMP(BED, mintemp_raw_BED, temp_bed.raw)) min_temp_error(H_BED); #endif #if BOTH(HAS_HEATED_CHAMBER, THERMAL_PROTECTION_CHAMBER) - #define CHAMBERCMP(A,B) (TEMPDIR(CHAMBER) < 0 ? ((A)<(B)) : ((A)>(B))) - if (CHAMBERCMP(temp_chamber.raw, maxtemp_raw_CHAMBER)) max_temp_error(H_CHAMBER); - if (temp_chamber.target > 0 && CHAMBERCMP(mintemp_raw_CHAMBER, temp_chamber.raw)) min_temp_error(H_CHAMBER); + if (TP_CMP(CHAMBER, temp_chamber.raw, maxtemp_raw_CHAMBER)) max_temp_error(H_CHAMBER); + if (temp_chamber.target > 0 && TP_CMP(CHAMBER, mintemp_raw_CHAMBER, temp_chamber.raw)) min_temp_error(H_CHAMBER); #endif #if BOTH(HAS_COOLER, THERMAL_PROTECTION_COOLER) - #define COOLERCMP(A,B) (TEMPDIR(COOLER) < 0 ? ((A)<(B)) : ((A)>(B))) - if (cutter.unitPower > 0 && COOLERCMP(temp_cooler.raw, maxtemp_raw_COOLER)) max_temp_error(H_COOLER); - if (COOLERCMP(mintemp_raw_COOLER, temp_cooler.raw)) min_temp_error(H_COOLER); + if (cutter.unitPower > 0 && TP_CMP(COOLER, temp_cooler.raw, maxtemp_raw_COOLER)) max_temp_error(H_COOLER); + if (TP_CMP(COOLER, mintemp_raw_COOLER, temp_cooler.raw)) min_temp_error(H_COOLER); + #endif + + #if BOTH(HAS_TEMP_BOARD, THERMAL_PROTECTION_BOARD) + if (TP_CMP(BOARD, temp_board.raw, maxtemp_raw_BOARD)) max_temp_error(H_BOARD); + if (TP_CMP(BOARD, mintemp_raw_BOARD, temp_board.raw)) min_temp_error(H_BOARD); #endif + #undef TP_CMP + } // Temperature::updateTemperaturesFromRawValues /** @@ -2294,6 +2342,9 @@ void Temperature::init() { #if HAS_TEMP_ADC_PROBE HAL_ANALOG_SELECT(TEMP_PROBE_PIN); #endif + #if HAS_TEMP_ADC_BOARD + HAL_ANALOG_SELECT(TEMP_BOARD_PIN); + #endif #if HAS_TEMP_ADC_REDUNDANT HAL_ANALOG_SELECT(TEMP_REDUNDANT_PIN); #endif @@ -2407,6 +2458,7 @@ void Temperature::init() { #endif #endif // HAS_HOTEND + // TODO: combine these into the macros above #if HAS_HEATED_BED while (analog_to_celsius_bed(mintemp_raw_BED) < BED_MINTEMP) mintemp_raw_BED += TEMPDIR(BED) * (OVERSAMPLENR); while (analog_to_celsius_bed(maxtemp_raw_BED) > BED_MAXTEMP) maxtemp_raw_BED -= TEMPDIR(BED) * (OVERSAMPLENR); @@ -2422,18 +2474,25 @@ void Temperature::init() { while (analog_to_celsius_cooler(maxtemp_raw_COOLER) < COOLER_MAXTEMP) maxtemp_raw_COOLER -= TEMPDIR(COOLER) * (OVERSAMPLENR); #endif + #if BOTH(HAS_TEMP_BOARD, THERMAL_PROTECTION_BOARD) + while (analog_to_celsius_board(mintemp_raw_BOARD) < BOARD_MINTEMP) mintemp_raw_BOARD += TEMPDIR(BOARD) * (OVERSAMPLENR); + while (analog_to_celsius_board(maxtemp_raw_BOARD) > BOARD_MAXTEMP) maxtemp_raw_BOARD -= TEMPDIR(BOARD) * (OVERSAMPLENR); + #endif + #if HAS_TEMP_REDUNDANT temp_redundant.target = &( - #if TEMP_SENSOR_REDUNDANT_TARGET == -5 && HAS_TEMP_COOLER + #if REDUNDANT_TEMP_MATCH(TARGET, COOLER) && HAS_TEMP_COOLER temp_cooler - #elif TEMP_SENSOR_REDUNDANT_TARGET == -4 && HAS_TEMP_PROBE + #elif REDUNDANT_TEMP_MATCH(TARGET, PROBE) && HAS_TEMP_PROBE temp_probe - #elif TEMP_SENSOR_REDUNDANT_TARGET == -2 && HAS_TEMP_CHAMBER + #elif REDUNDANT_TEMP_MATCH(TARGET, BOARD) && HAS_TEMP_BOARD + temp_board + #elif REDUNDANT_TEMP_MATCH(TARGET, CHAMBER) && HAS_TEMP_CHAMBER temp_chamber - #elif TEMP_SENSOR_REDUNDANT_TARGET == -1 && HAS_TEMP_BED + #elif REDUNDANT_TEMP_MATCH(TARGET, BED) && HAS_TEMP_BED temp_bed #else - temp_hotend[TEMP_SENSOR_REDUNDANT_TARGET] + temp_hotend[HEATER_ID(TEMP_SENSOR_REDUNDANT_TARGET)] #endif ); #endif @@ -2806,6 +2865,7 @@ void Temperature::disable_all_heaters() { */ void Temperature::update_raw_temperatures() { + // TODO: can this be collapsed into a HOTEND_LOOP()? #if HAS_TEMP_ADC_0 && !TEMP_SENSOR_0_IS_MAX_TC temp_hotend[0].update(); #endif @@ -2827,6 +2887,7 @@ void Temperature::update_raw_temperatures() { TERN_(HAS_TEMP_ADC_BED, temp_bed.update()); TERN_(HAS_TEMP_ADC_CHAMBER, temp_chamber.update()); TERN_(HAS_TEMP_ADC_PROBE, temp_probe.update()); + TERN_(HAS_TEMP_ADC_BOARD, temp_board.update()); TERN_(HAS_TEMP_ADC_COOLER, temp_cooler.update()); TERN_(HAS_JOY_ADC_X, joystick.x.update()); @@ -2853,10 +2914,11 @@ void Temperature::readings_ready() { HOTEND_LOOP() temp_hotend[e].reset(); #endif - TERN_(HAS_HEATED_BED, temp_bed.reset()); - TERN_(HAS_TEMP_CHAMBER, temp_chamber.reset()); - TERN_(HAS_TEMP_PROBE, temp_probe.reset()); - TERN_(HAS_TEMP_COOLER, temp_cooler.reset()); + TERN_(HAS_HEATED_BED, temp_bed.reset()); + TERN_(HAS_TEMP_CHAMBER, temp_chamber.reset()); + TERN_(HAS_TEMP_PROBE, temp_probe.reset()); + TERN_(HAS_TEMP_COOLER, temp_cooler.reset()); + TERN_(HAS_TEMP_BOARD, temp_board.reset()); TERN_(HAS_TEMP_REDUNDANT, temp_redundant.reset()); TERN_(HAS_JOY_ADC_X, joystick.x.reset()); @@ -3283,6 +3345,11 @@ void Temperature::isr() { case MeasureTemp_PROBE: ACCUMULATE_ADC(temp_probe); break; #endif + #if HAS_TEMP_ADC_BOARD + case PrepareTemp_BOARD: HAL_START_ADC(TEMP_BOARD_PIN); break; + case MeasureTemp_BOARD: ACCUMULATE_ADC(temp_board); break; + #endif + #if HAS_TEMP_ADC_REDUNDANT case PrepareTemp_REDUNDANT: HAL_START_ADC(TEMP_REDUNDANT_PIN); break; case MeasureTemp_REDUNDANT: ACCUMULATE_ADC(temp_redundant); break; @@ -3449,6 +3516,9 @@ void Temperature::isr() { #if HAS_TEMP_COOLER case H_COOLER: k = 'L'; break; #endif + #if HAS_TEMP_BOARD + case H_BOARD: k = 'M'; break; + #endif #if HAS_TEMP_REDUNDANT case H_REDUNDANT: k = 'R'; break; #endif @@ -3478,7 +3548,7 @@ void Temperature::isr() { OPTARG(HAS_TEMP_REDUNDANT, const bool include_r/*=false*/) ) { #if HAS_TEMP_HOTEND - print_heater_state(H_NONE, degHotend(target_extruder), degTargetHotend(target_extruder) OPTARG(SHOW_TEMP_ADC_VALUES, rawHotendTemp(target_extruder))); + print_heater_state(H_E0, degHotend(target_extruder), degTargetHotend(target_extruder) OPTARG(SHOW_TEMP_ADC_VALUES, rawHotendTemp(target_extruder))); #endif #if HAS_HEATED_BED print_heater_state(H_BED, degBed(), degTargetBed() OPTARG(SHOW_TEMP_ADC_VALUES, rawBedTemp())); @@ -3490,7 +3560,10 @@ void Temperature::isr() { print_heater_state(H_COOLER, degCooler(), TERN0(HAS_COOLER, degTargetCooler()) OPTARG(SHOW_TEMP_ADC_VALUES, rawCoolerTemp())); #endif #if HAS_TEMP_PROBE - print_heater_state(H_PROBE, degProbe(), 0 OPTARG(SHOW_TEMP_ADC_VALUES, rawProbeTemp()) ); + print_heater_state(H_PROBE, degProbe(), 0 OPTARG(SHOW_TEMP_ADC_VALUES, rawProbeTemp())); + #endif + #if HAS_TEMP_BOARD + print_heater_state(H_BOARD, degBoard(), 0 OPTARG(SHOW_TEMP_ADC_VALUES, rawBoardTemp())); #endif #if HAS_TEMP_REDUNDANT if (include_r) print_heater_state(H_REDUNDANT, degRedundant(), degRedundantTarget() OPTARG(SHOW_TEMP_ADC_VALUES, rawRedundantTemp())); diff --git a/Marlin/src/module/temperature.h b/Marlin/src/module/temperature.h index c8d085133c..c78dfa9372 100644 --- a/Marlin/src/module/temperature.h +++ b/Marlin/src/module/temperature.h @@ -46,9 +46,13 @@ // Element identifiers. Positive values are hotends. Negative values are other heaters or coolers. typedef enum : int8_t { - H_NONE = -6, - H_COOLER, H_PROBE, H_REDUNDANT, H_CHAMBER, H_BED, - H_E0, H_E1, H_E2, H_E3, H_E4, H_E5, H_E6, H_E7 + H_REDUNDANT = HID_REDUNDANT, + H_COOLER = HID_COOLER, + H_PROBE = HID_PROBE, + H_BOARD = HID_BOARD, + H_CHAMBER = HID_CHAMBER, + H_BED = HID_BED, + H_E0 = HID_E0, H_E1, H_E2, H_E3, H_E4, H_E5, H_E6, H_E7 } heater_id_t; // PID storage @@ -105,6 +109,9 @@ enum ADCSensorState : char { #if HAS_TEMP_ADC_PROBE PrepareTemp_PROBE, MeasureTemp_PROBE, #endif + #if HAS_TEMP_ADC_BOARD + PrepareTemp_BOARD, MeasureTemp_BOARD, + #endif #if HAS_TEMP_ADC_REDUNDANT PrepareTemp_REDUNDANT, MeasureTemp_REDUNDANT, #endif @@ -192,7 +199,7 @@ typedef struct TempInfo { // A redundant temperature sensor typedef struct RedundantTempInfo : public TempInfo { temp_info_t* target; - } redundant_temp_info_t; + } redundant_info_t; #endif // A PWM heater with temperature sensor @@ -231,6 +238,9 @@ struct PIDHeaterInfo : public HeaterInfo { #elif HAS_TEMP_CHAMBER typedef temp_info_t chamber_info_t; #endif +#if HAS_TEMP_BOARD + typedef temp_info_t board_info_t; +#endif #if EITHER(HAS_COOLER, HAS_TEMP_COOLER) typedef heater_info_t cooler_info_t; #endif @@ -312,6 +322,9 @@ typedef struct { int16_t raw_min, raw_max; celsius_t mintemp, maxtemp; } temp_ra #if TEMP_SENSOR_COOLER_IS_CUSTOM CTI_COOLER, #endif + #if TEMP_SENSOR_BOARD_IS_CUSTOM + CTI_BOARD, + #endif #if TEMP_SENSOR_REDUNDANT_IS_CUSTOM CTI_REDUNDANT, #endif @@ -352,8 +365,11 @@ class Temperature { #if HAS_TEMP_COOLER static cooler_info_t temp_cooler; #endif + #if HAS_TEMP_BOARD + static board_info_t temp_board; + #endif #if HAS_TEMP_REDUNDANT - static redundant_temp_info_t temp_redundant; + static redundant_info_t temp_redundant; #endif #if ENABLED(AUTO_POWER_E_FANS) @@ -478,6 +494,10 @@ class Temperature { static int16_t mintemp_raw_COOLER, maxtemp_raw_COOLER; #endif + #if HAS_TEMP_BOARD && ENABLED(THERMAL_PROTECTION_BOARD) + static int16_t mintemp_raw_BOARD, maxtemp_raw_BOARD; + #endif + #if MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED > 1 static uint8_t consecutive_low_temperature_error[HOTENDS]; #endif @@ -551,6 +571,9 @@ class Temperature { #if HAS_TEMP_COOLER static celsius_float_t analog_to_celsius_cooler(const int16_t raw); #endif + #if HAS_TEMP_BOARD + static celsius_float_t analog_to_celsius_board(const int16_t raw); + #endif #if HAS_TEMP_REDUNDANT static celsius_float_t analog_to_celsius_redundant(const int16_t raw); #endif @@ -787,6 +810,14 @@ class Temperature { #endif #endif + #if HAS_TEMP_BOARD + #if ENABLED(SHOW_TEMP_ADC_VALUES) + static inline int16_t rawBoardTemp() { return temp_board.raw; } + #endif + static inline celsius_float_t degBoard() { return temp_board.celsius; } + static inline celsius_t wholeDegBoard() { return static_cast(temp_board.celsius + 0.5f); } + #endif + #if HAS_TEMP_REDUNDANT #if ENABLED(SHOW_TEMP_ADC_VALUES) static inline int16_t rawRedundantTemp() { return temp_redundant.raw; } diff --git a/Marlin/src/module/thermistor/thermistor_2000.h b/Marlin/src/module/thermistor/thermistor_2000.h new file mode 100644 index 0000000000..3815a6f256 --- /dev/null +++ b/Marlin/src/module/thermistor/thermistor_2000.h @@ -0,0 +1,60 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +// R25 = 100 KOhm, beta25 = 4550 K, 4.7 kOhm pull-up, TDK NTCG104LH104KT1 https://product.tdk.com/en/search/sensor/ntc/chip-ntc-thermistor/info?part_no=NTCG104LH104KT1 +constexpr temp_entry_t temptable_2000[] PROGMEM = { +{ OV(313), 125 }, +{ OV(347), 120 }, +{ OV(383), 115 }, +{ OV(422), 110 }, +{ OV(463), 105 }, +{ OV(506), 100 }, +{ OV(549), 95 }, +{ OV(594), 90 }, +{ OV(638), 85 }, +{ OV(681), 80 }, +{ OV(722), 75 }, +{ OV(762), 70 }, +{ OV(799), 65 }, +{ OV(833), 60 }, +{ OV(863), 55 }, +{ OV(890), 50 }, +{ OV(914), 45 }, +{ OV(934), 40 }, +{ OV(951), 35 }, +{ OV(966), 30 }, +{ OV(978), 25 }, +{ OV(988), 20 }, +{ OV(996), 15 }, +{ OV(1002), 10 }, +{ OV(1007), 5 }, +{ OV(1012), 0 }, +{ OV(1015), -5 }, +{ OV(1017), -10 }, +{ OV(1019), -15 }, +{ OV(1020), -20 }, +{ OV(1021), -25 }, +{ OV(1022), -30 }, +{ OV(1023), -35 }, +{ OV(1023), -40 } +}; diff --git a/Marlin/src/module/thermistor/thermistors.h b/Marlin/src/module/thermistor/thermistors.h index a6cd7c86df..28a1e2f90f 100644 --- a/Marlin/src/module/thermistor/thermistors.h +++ b/Marlin/src/module/thermistor/thermistors.h @@ -51,6 +51,7 @@ || TEMP_SENSOR_IS(n, CHAMBER) \ || TEMP_SENSOR_IS(n, COOLER) \ || TEMP_SENSOR_IS(n, PROBE) \ + || TEMP_SENSOR_IS(n, BOARD) \ || TEMP_SENSOR_IS(n, REDUNDANT) ) typedef struct { int16_t value; celsius_t celsius; } temp_entry_t; @@ -200,6 +201,9 @@ typedef struct { int16_t value; celsius_t celsius; } temp_entry_t; #if ANY_THERMISTOR_IS(1047) // Pt1000 with 4k7 pullup #include "thermistor_1047.h" #endif +#if ANY_THERMISTOR_IS(2000) // "Ultimachine Rambo TDK NTCG104LH104KT1 NTC100K motherboard Thermistor" https://product.tdk.com/en/search/sensor/ntc/chip-ntc-thermistor/info?part_no=NTCG104LH104KT1 + #include "thermistor_2000.h" +#endif #if ANY_THERMISTOR_IS(998) // User-defined table 1 #include "thermistor_998.h" #endif @@ -305,6 +309,13 @@ typedef struct { int16_t value; celsius_t celsius; } temp_entry_t; #define TEMPTABLE_PROBE_LEN 0 #endif +#if TEMP_SENSOR_BOARD > 0 + #define TEMPTABLE_BOARD TT_NAME(TEMP_SENSOR_BOARD) + #define TEMPTABLE_BOARD_LEN COUNT(TEMPTABLE_BOARD) +#else + #define TEMPTABLE_BOARD_LEN 0 +#endif + #if TEMP_SENSOR_REDUNDANT > 0 #define TEMPTABLE_REDUNDANT TT_NAME(TEMP_SENSOR_REDUNDANT) #define TEMPTABLE_REDUNDANT_LEN COUNT(TEMPTABLE_REDUNDANT) @@ -319,6 +330,7 @@ static_assert(255 > TEMPTABLE_0_LEN || 255 > TEMPTABLE_1_LEN || 255 > TEMPTABLE_ || 255 > TEMPTABLE_CHAMBER_LEN || 255 > TEMPTABLE_COOLER_LEN || 255 > TEMPTABLE_PROBE_LEN + || 255 > TEMPTABLE_BOARD_LEN || 255 > TEMPTABLE_REDUNDANT_LEN , "Temperature conversion tables over 255 entries need special consideration." ); @@ -513,6 +525,15 @@ static_assert(255 > TEMPTABLE_0_LEN || 255 > TEMPTABLE_1_LEN || 255 > TEMPTABLE_ #define TEMP_SENSOR_PROBE_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE #endif #endif +#ifndef TEMP_SENSOR_BOARD_RAW_HI_TEMP + #if TT_REVRAW(BOARD) + #define TEMP_SENSOR_BOARD_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE + #define TEMP_SENSOR_BOARD_RAW_LO_TEMP 0 + #else + #define TEMP_SENSOR_BOARD_RAW_HI_TEMP 0 + #define TEMP_SENSOR_BOARD_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE + #endif +#endif #ifndef TEMP_SENSOR_REDUNDANT_RAW_HI_TEMP #if TT_REVRAW(REDUNDANT) #define TEMP_SENSOR_REDUNDANT_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h index 9f33c7c3f8..cb3d3242e2 100644 --- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h @@ -65,7 +65,7 @@ #define TEMP_BED_PIN P0_23_A0 // A0 (T0) - (67) - TEMP_BED_PIN #endif -#if HOTENDS == 1 && TEMP_SENSOR_REDUNDANT_SOURCE != 1 +#if HOTENDS == 1 && !REDUNDANT_TEMP_MATCH(SOURCE, E1) #if TEMP_SENSOR_PROBE #define TEMP_PROBE_PIN TEMP_1_PIN #elif TEMP_SENSOR_CHAMBER diff --git a/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h b/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h index 8c3c2aedac..cecb44efbe 100644 --- a/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h +++ b/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h @@ -165,8 +165,8 @@ // #define TEMP_0_PIN P0_24 #define TEMP_1_PIN P0_23 -//#define TEMP_2_PIN P1_30 // Onboard thermistor #define TEMP_BED_PIN P0_25 +#define TEMP_BOARD_PIN P1_30 // Onboard thermistor, NTC100K // // Heaters / Fans diff --git a/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h b/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h index de50657b74..78465dd7a8 100644 --- a/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h +++ b/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h @@ -114,10 +114,11 @@ // // Temperature Sensors // -#define TEMP_0_PIN 0 // Analog Input -#define TEMP_1_PIN 1 // Analog Input -#define TEMP_BED_PIN 2 // Analog Input -#define TEMP_PROBE_PIN 3 // Analog Input +#define TEMP_0_PIN 0 // Analog Input, Header J2 +#define TEMP_1_PIN 1 // Analog Input, Header J3 +#define TEMP_BOARD_PIN 91 // Onboard thermistor, 100k TDK NTCG104LH104JT1 +#define TEMP_BED_PIN 2 // Analog Input, Header J6 +#define TEMP_PROBE_PIN 3 // Analog Input, Header J15 // // Heaters / Fans diff --git a/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h b/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h index bc0d29b00a..7754fa9329 100644 --- a/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h +++ b/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h @@ -68,8 +68,8 @@ // #define TEMP_0_PIN 0 // Analog Input (HOTEND0 thermistor) #define TEMP_1_PIN 2 // Analog Input (unused) -#define TEMP_2_PIN 5 // Analog Input (OnBoard thermistor beta 3950) #define TEMP_BED_PIN 1 // Analog Input (BED thermistor) +#define TEMP_BOARD_PIN 5 // Analog Input (OnBoard thermistor beta 3950) // SPI for MAX Thermocouple #if DISABLED(SDSUPPORT) diff --git a/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h b/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h index 408048bfe2..2bfbb19427 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h @@ -161,6 +161,7 @@ // #define TEMP_0_PIN PA2 // T0 <-> E0 #define TEMP_1_PIN PA0 // T1 <-> E1 +#define TEMP_BOARD_PIN PC2 // Onboard thermistor, NTC100K #define TEMP_BED_PIN PA1 // T2 <-> Bed #define TEMP_PROBE_PIN PC3 // Shares J4 connector with PD1 diff --git a/buildroot/tests/mega2560 b/buildroot/tests/mega2560 index d757a6c96f..723d133081 100755 --- a/buildroot/tests/mega2560 +++ b/buildroot/tests/mega2560 @@ -199,6 +199,17 @@ opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS EEPROM_BOO exec_test $1 $2 "REPRAP MEGA2560 RAMPS | Laser Feature | Air Evacuation | Air Assist | Cooler | Flowmeter | 44780 LCD " "$3" +# +# Test redundant temperature sensors + MAX TC +# +restore_configs +opt_set MOTHERBOARD BOARD_RAMPS_14_EFB EXTRUDERS 1 \ + TEMP_SENSOR_0 -2 TEMP_SENSOR_REDUNDANT -2 \ + TEMP_SENSOR_REDUNDANT_SOURCE E1 TEMP_SENSOR_REDUNDANT_TARGET E0 \ + TEMP_0_CS_PIN 11 TEMP_1_CS_PIN 12 + +exec_test $1 $2 "MEGA2560 RAMPS | Redundant temperature sensor | 2x MAX6675" "$3" + # # Language files test with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER #