From 40d442fde294faedf839e3a80c82cd72c1824ba8 Mon Sep 17 00:00:00 2001 From: JoAnn Manges Date: Wed, 11 Nov 2020 16:52:35 -0500 Subject: [PATCH] Fix MAX31865 on SPI (PT100/1000) support (#20074) --- Marlin/Configuration.h | 10 +- Marlin/src/inc/Conditionals_post.h | 9 +- Marlin/src/inc/SanityCheck.h | 10 +- Marlin/src/module/temperature.cpp | 187 ++++++++++-------- Marlin/src/module/temperature.h | 2 +- .../PlatformIO/variants/archim/variant.h | 8 +- platformio.ini | 2 +- 7 files changed, 128 insertions(+), 100 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 785be167b8..374a420539 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -436,11 +436,11 @@ #define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_999_VALUE 100 -// Resistor values when using a MAX31865 (sensor -5) -// Sensor value is typically 100 (PT100) or 1000 (PT1000) -// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules. -//#define MAX31865_SENSOR_OHMS 100 -//#define MAX31865_CALIBRATION_OHMS 430 +// Resistor values when using MAX31865 sensors (-5) on TEMP_SENSOR_0 / 1 +//#define MAX31865_SENSOR_OHMS_0 100 // (Ω) Typically 100 or 1000 (PT100 or PT1000) +//#define MAX31865_CALIBRATION_OHMS_0 430 // (Ω) Typically 430 for AdaFruit PT100; 4300 for AdaFruit PT1000 +//#define MAX31865_SENSOR_OHMS_1 100 +//#define MAX31865_CALIBRATION_OHMS_1 430 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings // from the two sensors differ too much the print will be aborted. diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h index 9eeb39f9a8..9fb3e53c4e 100644 --- a/Marlin/src/inc/Conditionals_post.h +++ b/Marlin/src/inc/Conditionals_post.h @@ -445,9 +445,9 @@ #define HEATER_0_MAX6675_TMAX 1024 #endif #if TEMP_SENSOR_0 == -5 - #define MAX6675_IS_MAX31865 1 + #define MAX6675_0_IS_MAX31865 1 #elif TEMP_SENSOR_0 == -3 - #define MAX6675_IS_MAX31855 1 + #define MAX6675_0_IS_MAX31855 1 #endif #elif TEMP_SENSOR_0 == -4 #define HEATER_0_USES_AD8495 1 @@ -473,6 +473,11 @@ #define HEATER_1_MAX6675_TMIN 0 #define HEATER_1_MAX6675_TMAX 1024 #endif + #if TEMP_SENSOR_1 == -5 + #define MAX6675_1_IS_MAX31865 1 + #elif TEMP_SENSOR_1 == -3 + #define MAX6675_1_IS_MAX31855 1 + #endif #if TEMP_SENSOR_1 != TEMP_SENSOR_0 #if TEMP_SENSOR_1 == -5 #error "If MAX31865 Thermocouple (-5) is used for TEMP_SENSOR_1 then TEMP_SENSOR_0 must match." diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index 995daa7b8e..10f4676aa9 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -405,6 +405,10 @@ #error "MAX6675_SS is now MAX6675_SS_PIN. Please update your configuration and/or pins." #elif defined(MAX6675_SS2) #error "MAX6675_SS2 is now MAX6675_SS2_PIN. Please update your configuration and/or pins." +#elif defined(MAX31865_SENSOR_OHMS) + #error "MAX31865_SENSOR_OHMS is now MAX31865_SENSOR_OHMS_0. Please update your configuration." +#elif defined(MAX31865_CALIBRATION_OHMS) + #error "MAX31865_CALIBRATION_OHMS is now MAX31865_CALIBRATION_OHMS_0. Please update your configuration." #elif defined(SPINDLE_LASER_ENABLE) #error "SPINDLE_LASER_ENABLE is now SPINDLE_FEATURE or LASER_FEATURE. Please update your Configuration_adv.h." #elif defined(SPINDLE_LASER_ENABLE_PIN) @@ -1814,8 +1818,10 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal #error "TEMP_SENSOR_1 is required with TEMP_SENSOR_1_AS_REDUNDANT." #endif -#if MAX6675_IS_MAX31865 && !(defined(MAX31865_SENSOR_OHMS) && defined(MAX31865_CALIBRATION_OHMS)) - #error "MAX31865_SENSOR_OHMS and MAX31865_CALIBRATION_OHMS must be set in Configuration.h when using a MAX31865 temperature sensor." +#if MAX6675_0_IS_MAX31865 && !(defined(MAX31865_SENSOR_OHMS_0) && defined(MAX31865_CALIBRATION_OHMS_0)) + #error "MAX31865_SENSOR_OHMS_0 and MAX31865_CALIBRATION_OHMS_0 must be set in Configuration.h if TEMP_SENSOR_0 is MAX31865." +#elif MAX6675_1_IS_MAX31865 && !(defined(MAX31865_SENSOR_OHMS_1) && defined(MAX31865_CALIBRATION_OHMS_1)) + #error "MAX31865_SENSOR_OHMS_1 and MAX31865_CALIBRATION_OHMS_1 must be set in Configuration.h if TEMP_SENSOR_1 is MAX31865." #endif /** diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp index b476b35593..22c92fe448 100644 --- a/Marlin/src/module/temperature.cpp +++ b/Marlin/src/module/temperature.cpp @@ -44,30 +44,44 @@ #include "../lcd/extui/ui_api.h" #endif -#if MAX6675_IS_MAX31865 +#if MAX6675_0_IS_MAX31865 || MAX6675_1_IS_MAX31865 #include - #ifndef MAX31865_CS_PIN - #define MAX31865_CS_PIN MAX6675_SS_PIN // HW:49 SW:65 for example + #if MAX6675_0_IS_MAX31865 && !defined(MAX31865_CS_PIN) && PIN_EXISTS(MAX6675_SS) + #define MAX31865_CS_PIN MAX6675_SS_PIN + #endif + #if MAX6675_1_IS_MAX31865 && !defined(MAX31865_CS2_PIN) && PIN_EXISTS(MAX6675_SS2) + #define MAX31865_CS2_PIN MAX6675_SS2_PIN #endif #ifndef MAX31865_MOSI_PIN - #define MAX31865_MOSI_PIN MOSI_PIN // 63 + #define MAX31865_MOSI_PIN MOSI_PIN #endif #ifndef MAX31865_MISO_PIN - #define MAX31865_MISO_PIN MAX6675_DO_PIN // 42 + #define MAX31865_MISO_PIN MAX6675_DO_PIN #endif #ifndef MAX31865_SCK_PIN - #define MAX31865_SCK_PIN MAX6675_SCK_PIN // 40 + #define MAX31865_SCK_PIN MAX6675_SCK_PIN + #endif + #if MAX6675_0_IS_MAX31865 && PIN_EXISTS(MAX31865_CS) + #define HAS_MAX31865 1 + Adafruit_MAX31865 max31865_0 = Adafruit_MAX31865(MAX31865_CS_PIN + #if MAX31865_CS_PIN != MAX6675_SS_PIN + , MAX31865_MOSI_PIN, MAX31865_MISO_PIN, MAX31865_SCK_PIN // For software SPI also set MOSI/MISO/SCK + #endif + ); + #endif + #if MAX6675_1_IS_MAX31865 && PIN_EXISTS(MAX31865_CS2) + #define HAS_MAX31865 1 + Adafruit_MAX31865 max31865_1 = Adafruit_MAX31865(MAX31865_CS2_PIN + #if MAX31865_CS2_PIN != MAX6675_SS2_PIN + , MAX31865_MOSI_PIN, MAX31865_MISO_PIN, MAX31865_SCK_PIN // For software SPI also set MOSI/MISO/SCK + #endif + ); #endif - Adafruit_MAX31865 max31865 = Adafruit_MAX31865(MAX31865_CS_PIN - #if MAX31865_CS_PIN != MAX6675_SS_PIN - , MAX31865_MOSI_PIN // For software SPI also set MOSI/MISO/SCK - , MAX31865_MISO_PIN - , MAX31865_SCK_PIN - #endif - ); #endif -#define MAX6675_SEPARATE_SPI (EITHER(HEATER_0_USES_MAX6675, HEATER_1_USES_MAX6675) && PINS_EXIST(MAX6675_SCK, MAX6675_DO)) +#if EITHER(HEATER_0_USES_MAX6675, HEATER_1_USES_MAX6675) && PINS_EXIST(MAX6675_SCK, MAX6675_DO) + #define MAX6675_SEPARATE_SPI 1 +#endif #if MAX6675_SEPARATE_SPI #include "../libs/private_spi.h" @@ -1471,13 +1485,7 @@ void Temperature::manage_heater() { #if HEATER_0_USER_THERMISTOR return user_thermistor_to_deg_c(CTI_HOTEND_0, raw); #elif HEATER_0_USES_MAX6675 - return ( - #if MAX6675_IS_MAX31865 - max31865.temperature(MAX31865_SENSOR_OHMS, MAX31865_CALIBRATION_OHMS) - #else - raw * 0.25 - #endif - ); + return TERN(MAX6675_0_IS_MAX31865, max31865_0.temperature(MAX31865_SENSOR_OHMS_0, MAX31865_CALIBRATION_OHMS_0), raw * 0.25); #elif HEATER_0_USES_AD595 return TEMP_AD595(raw); #elif HEATER_0_USES_AD8495 @@ -1489,7 +1497,7 @@ void Temperature::manage_heater() { #if HEATER_1_USER_THERMISTOR return user_thermistor_to_deg_c(CTI_HOTEND_1, raw); #elif HEATER_1_USES_MAX6675 - return raw * 0.25; + return TERN(MAX6675_1_IS_MAX31865, max31865_1.temperature(MAX31865_SENSOR_OHMS_1, MAX31865_CALIBRATION_OHMS_1), raw * 0.25); #elif HEATER_1_USES_AD595 return TEMP_AD595(raw); #elif HEATER_1_USES_AD8495 @@ -1691,7 +1699,8 @@ void Temperature::updateTemperaturesFromRawValues() { */ void Temperature::init() { - TERN_(MAX6675_IS_MAX31865, max31865.begin(MAX31865_2WIRE)); // MAX31865_2WIRE, MAX31865_3WIRE, MAX31865_4WIRE + TERN_(MAX6675_0_IS_MAX31865, max31865_0.begin(MAX31865_2WIRE)); // MAX31865_2WIRE, MAX31865_3WIRE, MAX31865_4WIRE + TERN_(MAX6675_1_IS_MAX31865, max31865_1.begin(MAX31865_2WIRE)); #if EARLY_WATCHDOG // Flag that the thermalManager should be running @@ -2200,50 +2209,64 @@ void Temperature::disable_all_heaters() { #define THERMOCOUPLE_MAX_ERRORS 15 #endif - int Temperature::read_max6675( - #if COUNT_6675 > 1 - const uint8_t hindex - #endif - ) { - #if COUNT_6675 == 1 - constexpr uint8_t hindex = 0; - #else - // Needed to return the correct temp when this is called too soon - static uint16_t max6675_temp_previous[COUNT_6675] = { 0 }; - #endif - - static uint8_t max6675_errors[COUNT_6675] = { 0 }; - + int Temperature::read_max6675(TERN_(HAS_MULTI_6675, const uint8_t hindex/*=0*/)) { #define MAX6675_HEAT_INTERVAL 250UL - #if MAX6675_IS_MAX31855 + #if MAX6675_0_IS_MAX31855 || MAX6675_1_IS_MAX31855 static uint32_t max6675_temp = 2000; #define MAX6675_ERROR_MASK 7 #define MAX6675_DISCARD_BITS 18 - #define MAX6675_SPEED_BITS 3 // (_BV(SPR1)) // clock ÷ 64 + #define MAX6675_SPEED_BITS 3 // (_BV(SPR1)) // clock ÷ 64 + #elif HAS_MAX31865 + static uint16_t max6675_temp = 2000; // From datasheet 16 bits D15-D0 + #define MAX6675_ERROR_MASK 1 // D0 Bit not used + #define MAX6675_DISCARD_BITS 1 // Data is in D15-D1 + #define MAX6675_SPEED_BITS 3 // (_BV(SPR1)) // clock ÷ 64 #else static uint16_t max6675_temp = 2000; #define MAX6675_ERROR_MASK 4 #define MAX6675_DISCARD_BITS 3 - #define MAX6675_SPEED_BITS 2 // (_BV(SPR0)) // clock ÷ 16 + #define MAX6675_SPEED_BITS 2 // (_BV(SPR0)) // clock ÷ 16 #endif + #if HAS_MULTI_6675 + // Needed to return the correct temp when this is called between readings + static uint16_t max6675_temp_previous[COUNT_6675] = { 0 }; + #define MAX6675_TEMP(I) max6675_temp_previous[I] + #define MAX6675_SEL(A,B) (hindex ? (B) : (A)) + #define MAX6675_WRITE(V) do{ switch (hindex) { case 1: WRITE(MAX6675_SS2_PIN, V); break; default: WRITE(MAX6675_SS_PIN, V); } }while(0) + #define MAX6675_SET_OUTPUT() do{ switch (hindex) { case 1: SET_OUTPUT(MAX6675_SS2_PIN); break; default: SET_OUTPUT(MAX6675_SS_PIN); } }while(0) + #else + constexpr uint8_t hindex = 0; + #define MAX6675_TEMP(I) max6675_temp + #if MAX6675_1_IS_MAX31865 + #define MAX6675_SEL(A,B) B + #else + #define MAX6675_SEL(A,B) A + #endif + #if HEATER_0_USES_MAX6675 + #define MAX6675_WRITE(V) WRITE(MAX6675_SS_PIN, V) + #define MAX6675_SET_OUTPUT() SET_OUTPUT(MAX6675_SS_PIN) + #else + #define MAX6675_WRITE(V) WRITE(MAX6675_SS2_PIN, V) + #define MAX6675_SET_OUTPUT() SET_OUTPUT(MAX6675_SS2_PIN) + #endif + #endif + + static uint8_t max6675_errors[COUNT_6675] = { 0 }; + // Return last-read value between readings static millis_t next_max6675_ms[COUNT_6675] = { 0 }; millis_t ms = millis(); - if (PENDING(ms, next_max6675_ms[hindex])) - return int( - #if COUNT_6675 == 1 - max6675_temp - #else - max6675_temp_previous[hindex] // Need to return the correct previous value - #endif - ); - + if (PENDING(ms, next_max6675_ms[hindex])) return int(MAX6675_TEMP(hindex)); next_max6675_ms[hindex] = ms + MAX6675_HEAT_INTERVAL; - #if MAX6675_IS_MAX31865 - max6675_temp = int(max31865.temperature(MAX31865_SENSOR_OHMS, MAX31865_CALIBRATION_OHMS)); + #if HAS_MAX31865 + Adafruit_MAX31865 &maxref = MAX6675_SEL(max31865_0, max31865_1); + max6675_temp = int(maxref.temperature( + MAX6675_SEL(MAX31865_SENSOR_OHMS_0, MAX31865_SENSOR_OHMS_1), + MAX6675_SEL(MAX31865_CALIBRATION_OHMS_0, MAX31865_CALIBRATION_OHMS_1) + )); #endif // @@ -2254,39 +2277,24 @@ void Temperature::disable_all_heaters() { spiInit(MAX6675_SPEED_BITS); #endif - #if COUNT_6675 > 1 - #define WRITE_MAX6675(V) do{ switch (hindex) { case 1: WRITE(MAX6675_SS2_PIN, V); break; default: WRITE(MAX6675_SS_PIN, V); } }while(0) - #define SET_OUTPUT_MAX6675() do{ switch (hindex) { case 1: SET_OUTPUT(MAX6675_SS2_PIN); break; default: SET_OUTPUT(MAX6675_SS_PIN); } }while(0) - #elif HEATER_1_USES_MAX6675 - #define WRITE_MAX6675(V) WRITE(MAX6675_SS2_PIN, V) - #define SET_OUTPUT_MAX6675() SET_OUTPUT(MAX6675_SS2_PIN) - #else - #define WRITE_MAX6675(V) WRITE(MAX6675_SS_PIN, V) - #define SET_OUTPUT_MAX6675() SET_OUTPUT(MAX6675_SS_PIN) - #endif - - SET_OUTPUT_MAX6675(); - WRITE_MAX6675(LOW); // enable TT_MAX6675 + MAX6675_SET_OUTPUT(); + MAX6675_WRITE(LOW); // enable TT_MAX6675 DELAY_NS(100); // Ensure 100ns delay // Read a big-endian temperature value max6675_temp = 0; for (uint8_t i = sizeof(max6675_temp); i--;) { - max6675_temp |= ( - #if MAX6675_SEPARATE_SPI - max6675_spi.receive() - #else - spiRec() - #endif - ); + max6675_temp |= TERN(MAX6675_SEPARATE_SPI, max6675_spi.receive(), spiRec()); if (i > 0) max6675_temp <<= 8; // shift left if not the last byte } - WRITE_MAX6675(HIGH); // disable TT_MAX6675 + MAX6675_WRITE(HIGH); // disable TT_MAX6675 + + const uint8_t fault_31865 = TERN1(HAS_MAX31865, maxref.readFault()); - if (DISABLED(IGNORE_THERMOCOUPLE_ERRORS) && (max6675_temp & MAX6675_ERROR_MASK)) { - max6675_errors[hindex] += 1; + if (DISABLED(IGNORE_THERMOCOUPLE_ERRORS) && (max6675_temp & MAX6675_ERROR_MASK) && fault_31865) { + max6675_errors[hindex]++; if (max6675_errors[hindex] > THERMOCOUPLE_MAX_ERRORS) { SERIAL_ERROR_START(); SERIAL_ECHOPGM("Temp measurement error! "); @@ -2298,18 +2306,29 @@ void Temperature::disable_all_heaters() { SERIAL_ECHOLNPGM("Short to GND"); else if (max6675_temp & 4) SERIAL_ECHOLNPGM("Short to VCC"); + #elif HAS_MAX31865 + if (fault_31865) { + maxref.clearFault(); + SERIAL_ECHOPAIR("MAX31865 Fault :(", fault_31865, ") >>"); + if (fault_31865 & MAX31865_FAULT_HIGHTHRESH) + SERIAL_ECHOLNPGM("RTD High Threshold"); + else if (fault_31865 & MAX31865_FAULT_LOWTHRESH) + SERIAL_ECHOLNPGM("RTD Low Threshold"); + else if (fault_31865 & MAX31865_FAULT_REFINLOW) + SERIAL_ECHOLNPGM("REFIN- > 0.85 x Bias"); + else if (fault_31865 & MAX31865_FAULT_REFINHIGH) + SERIAL_ECHOLNPGM("REFIN- < 0.85 x Bias - FORCE- open"); + else if (fault_31865 & MAX31865_FAULT_RTDINLOW) + SERIAL_ECHOLNPGM("REFIN- < 0.85 x Bias - FORCE- open"); + else if (fault_31865 & MAX31865_FAULT_OVUV) + SERIAL_ECHOLNPGM("Under/Over voltage"); + } #else SERIAL_ECHOLNPGM("MAX6675"); #endif // Thermocouple open - max6675_temp = 4 * ( - #if COUNT_6675 > 1 - hindex ? HEATER_1_MAX6675_TMAX : HEATER_0_MAX6675_TMAX - #else - TERN(HEATER_1_USES_MAX6675, HEATER_1_MAX6675_TMAX, HEATER_0_MAX6675_TMAX) - #endif - ); + max6675_temp = 4 * MAX6675_SEL(HEATER_0_MAX6675_TMAX, HEATER_1_MAX6675_TMAX); } else max6675_temp >>= MAX6675_DISCARD_BITS; @@ -2319,13 +2338,11 @@ void Temperature::disable_all_heaters() { max6675_errors[hindex] = 0; } - #if ENABLED(MAX6675_IS_MAX31855) + #if MAX6675_0_IS_MAX31855 || MAX6675_1_IS_MAX31855 if (max6675_temp & 0x00002000) max6675_temp |= 0xFFFFC000; // Support negative temperature #endif - #if COUNT_6675 > 1 - max6675_temp_previous[hindex] = max6675_temp; - #endif + MAX6675_TEMP(hindex) = max6675_temp; return int(max6675_temp); } diff --git a/Marlin/src/module/temperature.h b/Marlin/src/module/temperature.h index 4090b845d3..edaa1c5384 100644 --- a/Marlin/src/module/temperature.h +++ b/Marlin/src/module/temperature.h @@ -811,7 +811,7 @@ class Temperature { #if HAS_MAX6675 #define COUNT_6675 1 + BOTH(HEATER_0_USES_MAX6675, HEATER_1_USES_MAX6675) #if COUNT_6675 > 1 - #define HAS_MULTI_6675 + #define HAS_MULTI_6675 1 #define READ_MAX6675(N) read_max6675(N) #else #define READ_MAX6675(N) read_max6675() diff --git a/buildroot/share/PlatformIO/variants/archim/variant.h b/buildroot/share/PlatformIO/variants/archim/variant.h index 179a137353..11f8f63bfb 100644 --- a/buildroot/share/PlatformIO/variants/archim/variant.h +++ b/buildroot/share/PlatformIO/variants/archim/variant.h @@ -55,10 +55,10 @@ extern "C"{ *----------------------------------------------------------------------------*/ // Number of pins defined in PinDescription array -#define PINS_COUNT (79U) -#define NUM_DIGITAL_PINS (66U) -#define NUM_ANALOG_INPUTS (12U) -#define analogInputToDigitalPin(p) ((p < 12U) ? (p) + 54U : -1) +#define PINS_COUNT 79 +#define NUM_DIGITAL_PINS 66 +#define NUM_ANALOG_INPUTS 12 +#define analogInputToDigitalPin(p) ((p < 12) ? (p) + 54 : -1) #define digitalPinToPort(P) ( g_APinDescription[P].pPort ) #define digitalPinToBitMask(P) ( g_APinDescription[P].ulPin ) diff --git a/platformio.ini b/platformio.ini index 15b8d4c23a..360a02f420 100644 --- a/platformio.ini +++ b/platformio.ini @@ -222,7 +222,7 @@ HAS_L64XX = Arduino-L6470@0.8.0 src_filter=+ + + NEOPIXEL_LED = Adafruit NeoPixel@1.5.0 src_filter=+ -MAX6675_IS_MAX31865 = Adafruit MAX31865 library@~1.1.0 +MAX6675_._IS_MAX31865 = Adafruit MAX31865 library@~1.1.0 USES_LIQUIDCRYSTAL = LiquidCrystal@1.5.0 USES_LIQUIDCRYSTAL_I2C = marcoschwartz/LiquidCrystal_I2C@1.1.4 USES_LIQUIDTWI2 = LiquidTWI2@1.2.7