diff --git a/Marlin/language_an.h b/Marlin/language_an.h index 2aa0a39291..f8b4b468d9 100644 --- a/Marlin/language_an.h +++ b/Marlin/language_an.h @@ -193,8 +193,7 @@ #define MSG_INFO_EXTRUDERS _UxGT("Extrusors") #define MSG_INFO_BAUDRATE _UxGT("Baudios") #define MSG_INFO_PROTOCOL _UxGT("Protocolo") -#define MSG_LIGHTS_ON _UxGT("Enchegar luz") -#define MSG_LIGHTS_OFF _UxGT("Desenchegar luz") +#define MSG_CASE_LIGHT _UxGT("Luz") #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("Conteo de impresion") diff --git a/Marlin/language_bg.h b/Marlin/language_bg.h index 2370ca5f5f..4ab01cb4a1 100644 --- a/Marlin/language_bg.h +++ b/Marlin/language_bg.h @@ -36,20 +36,11 @@ #define WELCOME_MSG MACHINE_NAME _UxGT(" Готов.") #define MSG_SD_INSERTED _UxGT("Картата е поставена") #define MSG_SD_REMOVED _UxGT("Картата е извадена") -#define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters #define MSG_MAIN _UxGT("Меню") #define MSG_AUTOSTART _UxGT("Автостарт") #define MSG_DISABLE_STEPPERS _UxGT("Изкл. двигатели") #define MSG_AUTO_HOME _UxGT("Паркиране") -#define MSG_AUTO_HOME_X _UxGT("Home X") -#define MSG_AUTO_HOME_Y _UxGT("Home Y") -#define MSG_AUTO_HOME_Z _UxGT("Home Z") -#define MSG_LEVEL_BED_HOMING _UxGT("Homing XYZ") -#define MSG_LEVEL_BED_WAITING _UxGT("Click to Begin") -#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Next Point") -#define MSG_LEVEL_BED_DONE _UxGT("Leveling Done!") #define MSG_SET_HOME_OFFSETS _UxGT("Задай Начало") -#define MSG_HOME_OFFSETS_APPLIED _UxGT("Offsets applied") #define MSG_SET_ORIGIN _UxGT("Изходна точка") #define MSG_PREHEAT_1 _UxGT("Подгряване PLA") #define MSG_PREHEAT_1_N _UxGT("Подгряване PLA") @@ -89,21 +80,6 @@ #define MSG_AUTOTEMP _UxGT("Авто-темп.") #define MSG_ON _UxGT("Вкл. ") #define MSG_OFF _UxGT("Изкл. ") -#define MSG_PID_P _UxGT("PID-P") -#define MSG_PID_I _UxGT("PID-I") -#define MSG_PID_D _UxGT("PID-D") -#define MSG_PID_C _UxGT("PID-C") -#define MSG_SELECT _UxGT("Select") -#define MSG_ACC _UxGT("Acc") -#define MSG_JERK _UxGT("Jerk") -#define MSG_VX_JERK _UxGT("Vx-jerk") -#define MSG_VY_JERK _UxGT("Vy-jerk") -#define MSG_VZ_JERK _UxGT("Vz-jerk") -#define MSG_VE_JERK _UxGT("Ve-jerk") -#define MSG_VMAX _UxGT("Vmax ") -#define MSG_VMIN _UxGT("Vmin") -#define MSG_VTRAV_MIN _UxGT("VTrav min") -#define MSG_AMAX _UxGT("Amax ") #define MSG_A_RETRACT _UxGT("A-откат") #define MSG_A_TRAVEL _UxGT("A-travel") #define MSG_STEPS_PER_MM _UxGT("Стъпки/mm") @@ -153,100 +129,15 @@ #define MSG_INIT_SDCARD _UxGT("Иниц. SD-Карта") #define MSG_CNG_SDCARD _UxGT("Смяна SD-Карта") #define MSG_ZPROBE_OUT _UxGT("Z-сондата е извадена") -#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test") -#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch") -#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST -#define MSG_FIRST _UxGT("first") #define MSG_ZPROBE_ZOFFSET _UxGT("Z Отстояние") #define MSG_BABYSTEP_X _UxGT("Министъпка X") #define MSG_BABYSTEP_Y _UxGT("Министъпка Y") #define MSG_BABYSTEP_Z _UxGT("Министъпка Z") #define MSG_ENDSTOP_ABORT _UxGT("Стоп Кр.Изключватели") -#define MSG_HEATING_FAILED_LCD _UxGT("Heating failed") -#define MSG_ERR_REDUNDANT_TEMP _UxGT("Err: REDUNDANT TEMP") -#define MSG_THERMAL_RUNAWAY _UxGT("THERMAL RUNAWAY") -#define MSG_ERR_MAXTEMP _UxGT("Err: MAXTEMP") -#define MSG_ERR_MINTEMP _UxGT("Err: MINTEMP") -#define MSG_ERR_MAXTEMP_BED _UxGT("Err: MAXTEMP BED") -#define MSG_ERR_MINTEMP_BED _UxGT("Err: MINTEMP BED") -#define MSG_ERR_Z_HOMING _UxGT("G28 Z Forbidden") -#define MSG_HALTED _UxGT("PRINTER HALTED") -#define MSG_PLEASE_RESET _UxGT("Please reset") -#define MSG_SHORT_DAY _UxGT("d") // One character only -#define MSG_SHORT_HOUR _UxGT("h") // One character only -#define MSG_SHORT_MINUTE _UxGT("m") // One character only -#define MSG_HEATING _UxGT("Heating...") -#define MSG_HEATING_COMPLETE _UxGT("Heating done.") -#define MSG_BED_HEATING _UxGT("Bed Heating.") -#define MSG_BED_DONE _UxGT("Bed done.") #define MSG_DELTA_CALIBRATE _UxGT("Делта Калибровка") #define MSG_DELTA_CALIBRATE_X _UxGT("Калибровка X") #define MSG_DELTA_CALIBRATE_Y _UxGT("Калибровка Y") #define MSG_DELTA_CALIBRATE_Z _UxGT("Калибровка Z") #define MSG_DELTA_CALIBRATE_CENTER _UxGT("Калибровка Център") -#define MSG_INFO_MENU _UxGT("About Printer") -#define MSG_INFO_PRINTER_MENU _UxGT("Printer Info") -#define MSG_INFO_STATS_MENU _UxGT("Printer Stats") -#define MSG_INFO_BOARD_MENU _UxGT("Board Info") -#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistors") -#define MSG_INFO_EXTRUDERS _UxGT("Extruders") -#define MSG_INFO_BAUDRATE _UxGT("Baud") -#define MSG_INFO_PROTOCOL _UxGT("Protocol") -#define MSG_LIGHTS_ON _UxGT("Case light on") -#define MSG_LIGHTS_OFF _UxGT("Case light off") - -#if LCD_WIDTH >= 20 - #define MSG_INFO_PRINT_COUNT _UxGT("Print Count") - #define MSG_INFO_COMPLETED_PRINTS _UxGT("Completed") - #define MSG_INFO_PRINT_TIME _UxGT("Total print time") - #define MSG_INFO_PRINT_LONGEST _UxGT("Longest job time") - #define MSG_INFO_PRINT_FILAMENT _UxGT("Extruded total") -#else - #define MSG_INFO_PRINT_COUNT _UxGT("Prints") - #define MSG_INFO_COMPLETED_PRINTS _UxGT("Completed") - #define MSG_INFO_PRINT_TIME _UxGT("Total") - #define MSG_INFO_PRINT_LONGEST _UxGT("Longest") - #define MSG_INFO_PRINT_FILAMENT _UxGT("Extruded") -#endif - -#define MSG_INFO_MIN_TEMP _UxGT("Min Temp") -#define MSG_INFO_MAX_TEMP _UxGT("Max Temp") -#define MSG_INFO_PSU _UxGT("Power Supply") - -#define MSG_DRIVE_STRENGTH _UxGT("Drive Strength") -#define MSG_DAC_PERCENT _UxGT("Driver %") -#define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM Write") - -#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED") -#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:") -#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extrude more") -#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Resume print") - -#if LCD_HEIGHT >= 4 - // Up to 3 lines allowed - #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Wait for start") - #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("of the filament") - #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("change") - #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wait for") - #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("filament unload") - #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert filament") - #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("and press button") - #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("to continue...") - #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Wait for") - #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament load") - #define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Wait for") - #define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("filament extrude") - #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wait for print") - #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("to resume") -#else // LCD_HEIGHT < 4 - // Up to 2 lines allowed - #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Please wait...") - #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Ejecting...") - #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert and Click") - #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Loading...") - #define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extruding...") - #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Resuming...") -#endif // LCD_HEIGHT < 4 - #endif // LANGUAGE_BG_H diff --git a/Marlin/language_ca.h b/Marlin/language_ca.h index 01a48d2b9d..9d5991ec00 100644 --- a/Marlin/language_ca.h +++ b/Marlin/language_ca.h @@ -196,8 +196,7 @@ #define MSG_INFO_EXTRUDERS _UxGT("Extrusors") #define MSG_INFO_BAUDRATE _UxGT("Baud") #define MSG_INFO_PROTOCOL _UxGT("Protocol") -#define MSG_LIGHTS_ON _UxGT("Encen el llum") -#define MSG_LIGHTS_OFF _UxGT("Apaga el llum") +#define MSG_CASE_LIGHT _UxGT("Llum") #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("Total impressions") diff --git a/Marlin/language_cz.h b/Marlin/language_cz.h index 2ee3310bcd..93fd475504 100644 --- a/Marlin/language_cz.h +++ b/Marlin/language_cz.h @@ -205,8 +205,8 @@ #define MSG_INFO_EXTRUDERS _UxGT("Extrudery") #define MSG_INFO_BAUDRATE _UxGT("Rychlost") #define MSG_INFO_PROTOCOL _UxGT("Protokol") -#define MSG_LIGHTS_ON _UxGT("Osvetleni Zap") -#define MSG_LIGHTS_OFF _UxGT("Osvetleni Vyp") +#define MSG_CASE_LIGHT _UxGT("Osvetleni") + #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("Pocet tisku") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Dokonceno") @@ -220,6 +220,7 @@ #define MSG_INFO_PRINT_LONGEST _UxGT("Nejdelsi") #define MSG_INFO_PRINT_FILAMENT _UxGT("Vytlaceno") #endif + #define MSG_INFO_MIN_TEMP _UxGT("Teplota min") #define MSG_INFO_MAX_TEMP _UxGT("Teplota max") #define MSG_INFO_PSU _UxGT("Nap. zdroj") diff --git a/Marlin/language_de.h b/Marlin/language_de.h index e5216d0051..1a6cb71f4d 100644 --- a/Marlin/language_de.h +++ b/Marlin/language_de.h @@ -205,8 +205,7 @@ #define MSG_INFO_EXTRUDERS _UxGT("Extruder") #define MSG_INFO_BAUDRATE _UxGT("Baud") #define MSG_INFO_PROTOCOL _UxGT("Protokoll") -#define MSG_LIGHTS_ON _UxGT("Gehäuse Licht an") -#define MSG_LIGHTS_OFF _UxGT("Gehäuse Licht aus") +#define MSG_CASE_LIGHT _UxGT("Licht") #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("Gesamte Drucke") @@ -221,6 +220,7 @@ #define MSG_INFO_PRINT_LONGEST _UxGT("Längster") #define MSG_INFO_PRINT_FILAMENT _UxGT("Extrud.") #endif + #define MSG_INFO_MIN_TEMP _UxGT("Min Temp") #define MSG_INFO_MAX_TEMP _UxGT("Max Temp") #define MSG_INFO_PSU _UxGT("Stromversorgung") diff --git a/Marlin/language_en.h b/Marlin/language_en.h index 9d0958d3a2..32690ebde2 100644 --- a/Marlin/language_en.h +++ b/Marlin/language_en.h @@ -700,11 +700,8 @@ #ifndef MSG_INFO_PROTOCOL #define MSG_INFO_PROTOCOL _UxGT("Protocol") #endif -#ifndef MSG_LIGHTS_ON - #define MSG_LIGHTS_ON _UxGT("Case light on") -#endif -#ifndef MSG_LIGHTS_OFF - #define MSG_LIGHTS_OFF _UxGT("Case light off") +#ifndef MSG_CASE_LIGHT + #define MSG_CASE_LIGHT _UxGT("Case light") #endif #if LCD_WIDTH >= 20 diff --git a/Marlin/language_es.h b/Marlin/language_es.h index 30ebb1e211..2ea296acdd 100644 --- a/Marlin/language_es.h +++ b/Marlin/language_es.h @@ -202,8 +202,8 @@ #define MSG_INFO_EXTRUDERS _UxGT("Extrusores") #define MSG_INFO_BAUDRATE _UxGT("Baudios") #define MSG_INFO_PROTOCOL _UxGT("Protocolo") -#define MSG_LIGHTS_ON _UxGT("Luz cabina ON") -#define MSG_LIGHTS_OFF _UxGT("Luz cabina OFF") +#define MSG_CASE_LIGHT _UxGT("Luz cabina") + #if LCD_WIDTH > 19 #define MSG_INFO_PRINT_COUNT _UxGT("Conteo de impresion") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Completadas") @@ -217,6 +217,7 @@ #define MSG_INFO_PRINT_LONGEST _UxGT("Mas larga") #define MSG_INFO_PRINT_FILAMENT _UxGT("Extrusion") #endif + #define MSG_INFO_MIN_TEMP _UxGT("Temperatura minima") #define MSG_INFO_MAX_TEMP _UxGT("Temperatura maxima") #define MSG_INFO_PSU _UxGT("Fuente de poder") diff --git a/Marlin/language_eu.h b/Marlin/language_eu.h index 64dbd5caec..3296210263 100644 --- a/Marlin/language_eu.h +++ b/Marlin/language_eu.h @@ -202,8 +202,8 @@ #define MSG_INFO_EXTRUDERS _UxGT("Estrusoreak") #define MSG_INFO_BAUDRATE _UxGT("Baudioak") #define MSG_INFO_PROTOCOL _UxGT("Protokoloa") -#define MSG_LIGHTS_ON _UxGT("Kabina Argia ON") -#define MSG_LIGHTS_OFF _UxGT("Kabina Argia OFF") +#define MSG_CASE_LIGHT _UxGT("Kabina Argia") + #if LCD_WIDTH > 19 #define MSG_INFO_PRINT_COUNT _UxGT("Inprim. Zenbaketa") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Burututa") diff --git a/Marlin/language_fr.h b/Marlin/language_fr.h index 116f5d8b17..a919eb9b00 100644 --- a/Marlin/language_fr.h +++ b/Marlin/language_fr.h @@ -207,8 +207,7 @@ #define MSG_INFO_EXTRUDERS _UxGT("Extrudeurs") #define MSG_INFO_BAUDRATE _UxGT("Baud") #define MSG_INFO_PROTOCOL _UxGT("Protocole") -#define MSG_LIGHTS_ON _UxGT("Allumer boîtier") -#define MSG_LIGHTS_OFF _UxGT("Eteindre boîtier") +#define MSG_CASE_LIGHT _UxGT("Lumière") #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("Nbre impressions") diff --git a/Marlin/language_gl.h b/Marlin/language_gl.h index d6234e5d3b..6c86f11831 100644 --- a/Marlin/language_gl.h +++ b/Marlin/language_gl.h @@ -192,8 +192,7 @@ #define MSG_INFO_EXTRUDERS _UxGT("Extrusores") #define MSG_INFO_BAUDRATE _UxGT("Baudios") #define MSG_INFO_PROTOCOL _UxGT("Protocolo") -#define MSG_LIGHTS_ON _UxGT("Acender a luz") -#define MSG_LIGHTS_OFF _UxGT("Apagar a luz") +#define MSG_CASE_LIGHT _UxGT("Luz") #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("Total traballos") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Total completos") diff --git a/Marlin/language_hr.h b/Marlin/language_hr.h index 72a4fd0c37..d50b677135 100644 --- a/Marlin/language_hr.h +++ b/Marlin/language_hr.h @@ -191,8 +191,7 @@ #define MSG_INFO_EXTRUDERS _UxGT("Extruderi") #define MSG_INFO_BAUDRATE _UxGT("Baud") #define MSG_INFO_PROTOCOL _UxGT("Protokol") -#define MSG_LIGHTS_ON _UxGT("Upali osvjetljenje") -#define MSG_LIGHTS_OFF _UxGT("Ugasi osvjetljenje") +#define MSG_CASE_LIGHT _UxGT("Osvjetljenje") #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("Broj printova") diff --git a/Marlin/language_it.h b/Marlin/language_it.h index 6ff2337fdf..b0e8cc9fbf 100644 --- a/Marlin/language_it.h +++ b/Marlin/language_it.h @@ -209,8 +209,8 @@ #define MSG_INFO_EXTRUDERS _UxGT("Estrusori") #define MSG_INFO_BAUDRATE _UxGT("Baud") #define MSG_INFO_PROTOCOL _UxGT("Protocollo") -#define MSG_LIGHTS_ON _UxGT("Luci Case on") -#define MSG_LIGHTS_OFF _UxGT("Luci Case off") +#define MSG_CASE_LIGHT _UxGT("Luci Case") + #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("Contat. stampa") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Completati") diff --git a/Marlin/language_kana.h b/Marlin/language_kana.h index c8169a265b..0d7f37c0a9 100644 --- a/Marlin/language_kana.h +++ b/Marlin/language_kana.h @@ -262,8 +262,7 @@ #define MSG_INFO_EXTRUDERS "\xb4\xb8\xbd\xc4\xd9\xb0\xc0\xde\xb0\xbd\xb3" // "ｴｸｽﾄﾙｰﾀﾞｰｽｳ" ("Extruders") #define MSG_INFO_BAUDRATE "\xce\xde\xb0\xda\xb0\xc4" // "ﾎﾞｰﾚｰﾄ" ("Baud") #define MSG_INFO_PROTOCOL "\xcc\xdf\xdb\xc4\xba\xd9" // "ﾌﾟﾛﾄｺﾙ" ("Protocol") -#define MSG_LIGHTS_ON "\xb7\xae\xb3\xc0\xb2\xc5\xb2\xbc\xae\xb3\xd2\xb2\x20\xb5\xdd" // "ｷｮｳﾀｲﾅｲｼｮｳﾒｲ ｵﾝ" ("Case light on") -#define MSG_LIGHTS_OFF "\xb7\xae\xb3\xc0\xb2\xc5\xb2\xbc\xae\xb3\xd2\xb2\x20\xb5\xcc" // "ｷｮｳﾀｲﾅｲｼｮｳﾒｲ ｵﾌ" ("Case light off") +#define MSG_CASE_LIGHT "\xb7\xae\xb3\xc0\xb2\xc5\xb2\xbc\xae\xb3\xd2\xb2" // "ｷｮｳﾀｲﾅｲｼｮｳﾒｲ" ("Case light") #define MSG_INFO_PRINT_COUNT "\xcc\xdf\xd8\xdd\xc4\xbd\xb3" // "ﾌﾟﾘﾝﾄｽｳ" ("Print Count") #define MSG_INFO_COMPLETED_PRINTS "\xb6\xdd\xd8\xae\xb3\xbd\xb3" // "ｶﾝﾘｮｳｽｳ" ("Completed") #define MSG_INFO_PRINT_TIME "\xcc\xdf\xd8\xdd\xc4\xbc\xde\xb6\xdd\xd9\xb2\xb9\xb2" // "ﾌﾟﾘﾝﾄｼﾞｶﾝﾙｲｹｲ" ("Total print time") diff --git a/Marlin/language_kana_utf8.h b/Marlin/language_kana_utf8.h index 874647ad54..5a0378bb98 100644 --- a/Marlin/language_kana_utf8.h +++ b/Marlin/language_kana_utf8.h @@ -192,8 +192,7 @@ #define MSG_INFO_EXTRUDERS _UxGT("エクストルーダースウ") // "Extruders" #define MSG_INFO_BAUDRATE _UxGT("ボーレート") // "Baud" #define MSG_INFO_PROTOCOL _UxGT("プロトコル") // "Protocol" -#define MSG_LIGHTS_ON _UxGT("キョウタイナイショウメイ オン") // "Case light on" -#define MSG_LIGHTS_OFF _UxGT("キョウタイナイショウメイ オフ") // "Case light off" +#define MSG_CASE_LIGHT _UxGT("キョウタイナイショウメイ") // "Case light" #define MSG_INFO_PRINT_COUNT _UxGT("プリントスウ ") // "Print Count" #define MSG_INFO_COMPLETED_PRINTS _UxGT("カンリョウスウ") // "Completed" #define MSG_INFO_PRINT_TIME _UxGT("プリントジカンルイケイ") // "Total print time" diff --git a/Marlin/language_nl.h b/Marlin/language_nl.h index ffb71f69d9..27274aaca7 100644 --- a/Marlin/language_nl.h +++ b/Marlin/language_nl.h @@ -202,8 +202,7 @@ #define MSG_INFO_MENU _UxGT("Over Printer") #define MSG_INFO_PRINTER_MENU _UxGT("Printer Info") #define MSG_INFO_PROTOCOL _UxGT("Protocol") -#define MSG_LIGHTS_ON _UxGT("Case licht aan") -#define MSG_LIGHTS_OFF _UxGT("Case licht uit") +#define MSG_CASE_LIGHT _UxGT("Case licht") #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("Printed Aantal") diff --git a/Marlin/language_pl-DOGM.h b/Marlin/language_pl-DOGM.h new file mode 100644 index 0000000000..d93cfa454b --- /dev/null +++ b/Marlin/language_pl-DOGM.h @@ -0,0 +1,240 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Polish for DOGM display - includes accented characters + */ + +#define WELCOME_MSG MACHINE_NAME _UxGT(" gotowy.") +#define MSG_SD_INSERTED _UxGT("Karta włożona") +#define MSG_SD_REMOVED _UxGT("Karta usunięta") +#define MSG_LCD_ENDSTOPS _UxGT("Kranców.") // Max length 8 characters +#define MSG_MAIN _UxGT("Menu główne") +#define MSG_AUTOSTART _UxGT("Autostart") +#define MSG_DISABLE_STEPPERS _UxGT("Wyłącz silniki") +#define MSG_AUTO_HOME _UxGT("Pozycja zerowa") +#define MSG_AUTO_HOME_X _UxGT("Zeruj X") +#define MSG_AUTO_HOME_Y _UxGT("Zeruj Y") +#define MSG_AUTO_HOME_Z _UxGT("Zeruj Z") +#define MSG_LEVEL_BED _UxGT("Poziom. stołu") +#define MSG_LEVEL_BED_HOMING _UxGT("Pozycja zerowa") +#define MSG_LEVEL_BED_WAITING _UxGT("Kliknij by rozp.") +#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Następny punkt") +#define MSG_LEVEL_BED_DONE _UxGT("Wypoziomowano!") +#define MSG_SET_HOME_OFFSETS _UxGT("Ust. poz. zer.") +#define MSG_HOME_OFFSETS_APPLIED _UxGT("Poz. zerowa ust.") +#define MSG_SET_ORIGIN _UxGT("Ustaw punkt zero") +#define MSG_PREHEAT_1 _UxGT("Rozgrzej PLA") +#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") +#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" wsz.") +#define MSG_PREHEAT_1_BEDONLY _UxGT("Rozgrzej stół PLA") +#define MSG_PREHEAT_1_SETTINGS _UxGT("Ustaw. rozg. PLA") +#define MSG_PREHEAT_2 _UxGT("Rozgrzej ABS") +#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") +#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" wsz.") +#define MSG_PREHEAT_2_BEDONLY _UxGT("Rozgrzej stół ABS") +#define MSG_PREHEAT_2_SETTINGS _UxGT("Ustaw. rozg. ABS") +#define MSG_COOLDOWN _UxGT("Chłodzenie") +#define MSG_SWITCH_PS_ON _UxGT("Włącz zasilacz") +#define MSG_SWITCH_PS_OFF _UxGT("Wyłącz zasilacz") +#define MSG_EXTRUDE _UxGT("Ekstruzja") +#define MSG_RETRACT _UxGT("Wycofanie") +#define MSG_MOVE_AXIS _UxGT("Ruch osi") +#define MSG_BED_LEVELING _UxGT("Poziom. stołu") +#define MSG_MOVE_X _UxGT("Przesuń w X") +#define MSG_MOVE_Y _UxGT("Przesuń w Y") +#define MSG_MOVE_Z _UxGT("Przesuń w Z") +#define MSG_MOVE_E _UxGT("Ekstruzja (os E)") +#define MSG_MOVE_01MM _UxGT("Przesuń co .1mm") +#define MSG_MOVE_1MM _UxGT("Przesuń co 1mm") +#define MSG_MOVE_10MM _UxGT("Przesuń co 10mm") +#define MSG_SPEED _UxGT("Predkość") +#define MSG_BED_Z _UxGT("Stół Z") +#define MSG_NOZZLE _UxGT("Dysza") +#define MSG_BED _UxGT("Stół") +#define MSG_FAN_SPEED _UxGT("Obroty wiatraka") +#define MSG_FLOW _UxGT("Przepływ") +#define MSG_CONTROL _UxGT("Ustawienia") +#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Min") +#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" Max") +#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Mnożnik") +#define MSG_AUTOTEMP _UxGT("Auto. temperatura") +#define MSG_ON _UxGT("Wł. ") +#define MSG_OFF _UxGT("Wył.") +#define MSG_PID_P _UxGT("PID-P") +#define MSG_PID_I _UxGT("PID-I") +#define MSG_PID_D _UxGT("PID-D") +#define MSG_PID_C _UxGT("PID-C") +#define MSG_SELECT _UxGT("Select") +#define MSG_ACC _UxGT("Przyśpieszenie") +#define MSG_JERK _UxGT("Zryw") +#define MSG_VX_JERK _UxGT("Zryw Vx") +#define MSG_VY_JERK _UxGT("Zryw Vy") +#define MSG_VZ_JERK _UxGT("Zryw Vz") +#define MSG_VE_JERK _UxGT("Zryw Ve") +#define MSG_VMAX _UxGT("Vmax ") +#define MSG_VMIN _UxGT("Vmin") +#define MSG_VTRAV_MIN _UxGT("Vskok min") +#define MSG_ACCELERATION MSG_ACC +#define MSG_AMAX _UxGT("Amax") +#define MSG_A_RETRACT _UxGT("A-wycofanie") +#define MSG_A_TRAVEL _UxGT("A-przesuń.") +#define MSG_STEPS_PER_MM _UxGT("kroki/mm") +#define MSG_XSTEPS _UxGT("krokiX/mm") +#define MSG_YSTEPS _UxGT("krokiY/mm") +#define MSG_ZSTEPS _UxGT("krokiZ/mm") +#define MSG_ESTEPS _UxGT("krokiE/mm") +#define MSG_E1STEPS _UxGT("krokiE1/mm") +#define MSG_E2STEPS _UxGT("krokiE2/mm") +#define MSG_E3STEPS _UxGT("krokiE3/mm") +#define MSG_E4STEPS _UxGT("krokiE4/mm") +#define MSG_E5STEPS _UxGT("krokiE5/mm") +#define MSG_TEMPERATURE _UxGT("Temperatura") +#define MSG_MOTION _UxGT("Ruch") +#define MSG_FILAMENT _UxGT("Filament") +#define MSG_VOLUMETRIC_ENABLED _UxGT("E w mm3") +#define MSG_FILAMENT_DIAM _UxGT("Śr. fil.") +#define MSG_CONTRAST _UxGT("Kontrast LCD") +#define MSG_STORE_EEPROM _UxGT("Zapisz w pamięci") +#define MSG_LOAD_EEPROM _UxGT("Wczytaj z pamięci") +#define MSG_RESTORE_FAILSAFE _UxGT("Ustaw. fabryczne") +#define MSG_REFRESH _UxGT("Odswież") +#define MSG_WATCH _UxGT("Ekran główny") +#define MSG_PREPARE _UxGT("Przygotuj") +#define MSG_TUNE _UxGT("Strojenie") +#define MSG_PAUSE_PRINT _UxGT("Pauza") +#define MSG_RESUME_PRINT _UxGT("Wznowienie") +#define MSG_STOP_PRINT _UxGT("Stop") +#define MSG_CARD_MENU _UxGT("Karta SD") +#define MSG_NO_CARD _UxGT("Brak karty") +#define MSG_DWELL _UxGT("Uśpij...") +#define MSG_USERWAIT _UxGT("Oczekiwanie...") +#define MSG_RESUMING _UxGT("Wznawianie druku") +#define MSG_PRINT_ABORTED _UxGT("Druk przerwany") +#define MSG_NO_MOVE _UxGT("Brak ruchu") +#define MSG_KILLED _UxGT("Ubity. ") +#define MSG_STOPPED _UxGT("Zatrzymany. ") +#define MSG_CONTROL_RETRACT _UxGT("Wycofaj mm") +#define MSG_CONTROL_RETRACT_SWAP _UxGT("Z Wycof. mm") +#define MSG_CONTROL_RETRACTF _UxGT("Wycofaj V") +#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Skok Z mm") +#define MSG_CONTROL_RETRACT_RECOVER _UxGT("Cof. wycof. mm") +#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Z Cof. wyc. mm") +#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("Cof. wycof. V") +#define MSG_AUTORETRACT _UxGT("Auto. wycofanie") +#define MSG_FILAMENTCHANGE _UxGT("Zmień filament") +#define MSG_INIT_SDCARD _UxGT("Inicjal. karty SD") +#define MSG_CNG_SDCARD _UxGT("Zmiana karty SD") +#define MSG_ZPROBE_OUT _UxGT("Sonda Z za stołem") +#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test") +#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch") +#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST +#define MSG_FIRST _UxGT("first") +#define MSG_ZPROBE_ZOFFSET _UxGT("Offset Z") +#define MSG_BABYSTEP_X _UxGT("Babystep X") +#define MSG_BABYSTEP_Y _UxGT("Babystep Y") +#define MSG_BABYSTEP_Z _UxGT("Babystep Z") +#define MSG_ENDSTOP_ABORT _UxGT("Błąd krańcówki") +#define MSG_HEATING_FAILED_LCD _UxGT("Rozgrz. nieudane") +#define MSG_ERR_REDUNDANT_TEMP _UxGT("Błąd temperatury") +#define MSG_THERMAL_RUNAWAY _UxGT("Zanik temp.") +#define MSG_ERR_MAXTEMP _UxGT("Err max temp") +#define MSG_ERR_MINTEMP _UxGT("Err min temp") +#define MSG_ERR_MAXTEMP_BED _UxGT("Err max temp stołu") +#define MSG_ERR_MINTEMP_BED _UxGT("Err min temp stołu") +#define MSG_ERR_Z_HOMING _UxGT("G28 Z Forbidden") +#define MSG_HALTED _UxGT("Drukarka zatrzym.") +#define MSG_PLEASE_RESET _UxGT("Proszę zresetować") +#define MSG_SHORT_DAY _UxGT("d") // One character only +#define MSG_SHORT_HOUR _UxGT("g") // One character only +#define MSG_SHORT_MINUTE _UxGT("m") // One character only +#define MSG_HEATING _UxGT("Rozgrzewanie...") +#define MSG_HEATING_COMPLETE _UxGT("Rozgrzano") +#define MSG_BED_HEATING _UxGT("Rozgrzewanie stołu...") +#define MSG_BED_DONE _UxGT("Rozgrzano stół") +#define MSG_DELTA_CALIBRATE _UxGT("Kalibrowanie Delty") +#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibruj X") +#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibruj Y") +#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibruj Z") +#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibruj środek") + +#define MSG_INFO_MENU _UxGT("O drukarce") +#define MSG_INFO_PRINTER_MENU _UxGT("Info drukarki") +#define MSG_INFO_STATS_MENU _UxGT("Statystyki") +#define MSG_INFO_BOARD_MENU _UxGT("Board Info") +#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistory") +#define MSG_INFO_EXTRUDERS _UxGT("Ekstrudery") +#define MSG_INFO_BAUDRATE _UxGT("Predkość USB") +#define MSG_INFO_PROTOCOL _UxGT("Protokół") +#define MSG_CASE_LIGHT _UxGT("Oświetlenie") + +#if LCD_WIDTH >= 20 + #define MSG_INFO_PRINT_COUNT _UxGT("Wydrukowano") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Ukończono") + #define MSG_INFO_PRINT_TIME _UxGT("Czas druku") + #define MSG_INFO_PRINT_LONGEST _UxGT("Najdł. druk") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Użyty fil.") +#else + #define MSG_INFO_PRINT_COUNT _UxGT("Wydrukowano") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Ukończono") + #define MSG_INFO_PRINT_TIME _UxGT("Razem") + #define MSG_INFO_PRINT_LONGEST _UxGT("Najdł. druk") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Użyty fil.") +#endif + +#define MSG_INFO_MIN_TEMP _UxGT("Min Temp") +#define MSG_INFO_MAX_TEMP _UxGT("Max Temp") +#define MSG_INFO_PSU _UxGT("Zasilacz") + +#define MSG_DRIVE_STRENGTH _UxGT("Siła silnika") +#define MSG_DAC_PERCENT _UxGT("Siła %") +#define MSG_DAC_EEPROM_WRITE _UxGT("Zapisz DAC EEPROM") + +#define MSG_FILAMENT_CHANGE_HEADER _UxGT("ZMIEŃ FILAMENT") +#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("ZMIEŃ OPCJE:") +#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Ekstruduj więcej") +#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Wznów drukowanie") + +#if LCD_HEIGHT >= 4 + // Up to 3 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Czekam na ") + #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("zmianę filamentu") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Czekam na") + #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("wyjęcie filamentu") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Włóz filament") + #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("i naciśnij przycisk") + #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("aby kontynuować...") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Czekam na") + #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("włożenie filamentu") + #define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Czekam na") + #define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("ekstruzję filamentu") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Czekam na") + #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("wznowienie druku") +#else // LCD_HEIGHT < 4 + // Up to 2 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Proszę czekać...") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wysuwanie...") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Włóż i naciśnij prz.") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Ładowanie...") + #define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Ekstruzja...") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wznowienie...") +#endif // LCD_HEIGHT < 4 diff --git a/Marlin/language_pl-HD44780.h b/Marlin/language_pl-HD44780.h new file mode 100644 index 0000000000..7c5ea08380 --- /dev/null +++ b/Marlin/language_pl-HD44780.h @@ -0,0 +1,265 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Polish for HD44780 display - no accented characters + */ + +#define WELCOME_MSG MACHINE_NAME _UxGT(" gotowy.") +#define MSG_SD_INSERTED _UxGT("Karta wlozona") +#define MSG_SD_REMOVED _UxGT("Karta usunieta") +#define MSG_LCD_ENDSTOPS _UxGT("Krancow.") // Max length 8 characters +#define MSG_MAIN _UxGT("Menu glowne") +#define MSG_AUTOSTART _UxGT("Autostart") +#define MSG_DISABLE_STEPPERS _UxGT("Wylacz silniki") +#define MSG_AUTO_HOME _UxGT("Pozycja zerowa") +#define MSG_AUTO_HOME_X _UxGT("Zeruj X") +#define MSG_AUTO_HOME_Y _UxGT("Zeruj Y") +#define MSG_AUTO_HOME_Z _UxGT("Zeruj Z") +#define MSG_LEVEL_BED _UxGT("Poziom. stolu") +#define MSG_LEVEL_BED_HOMING _UxGT("Pozycja zerowa") +#define MSG_LEVEL_BED_WAITING _UxGT("Kliknij by rozp.") +#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Nastepny punkt") +#define MSG_LEVEL_BED_DONE _UxGT("Wypoziomowano!") +#define MSG_SET_HOME_OFFSETS _UxGT("Ust. poz. zer.") +#define MSG_HOME_OFFSETS_APPLIED _UxGT("Poz. zerowa ust.") +#define MSG_SET_ORIGIN _UxGT("Ustaw punkt zero") +#define MSG_PREHEAT_1 _UxGT("Rozgrzej PLA") +#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") +#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" wsz.") +#define MSG_PREHEAT_1_BEDONLY _UxGT("Rozgrzej stol PLA") +#define MSG_PREHEAT_1_SETTINGS _UxGT("Ustaw. rozg. PLA") +#define MSG_PREHEAT_2 _UxGT("Rozgrzej ABS") +#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") +#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" wsz.") +#define MSG_PREHEAT_2_BEDONLY _UxGT("Rozgrzej stol ABS") +#define MSG_PREHEAT_2_SETTINGS _UxGT("Ustaw. rozg. ABS") +#define MSG_COOLDOWN _UxGT("Chlodzenie") +#define MSG_SWITCH_PS_ON _UxGT("Wlacz zasilacz") +#define MSG_SWITCH_PS_OFF _UxGT("Wylacz zasilacz") +#define MSG_EXTRUDE _UxGT("Ekstruzja") +#define MSG_RETRACT _UxGT("Wycofanie") +#define MSG_MOVE_AXIS _UxGT("Ruch osi") +#define MSG_BED_LEVELING _UxGT("Poziom. stolu") +#define MSG_MOVE_X _UxGT("Przesun w X") +#define MSG_MOVE_Y _UxGT("Przesun w Y") +#define MSG_MOVE_Z _UxGT("Przesun w Z") +#define MSG_MOVE_E _UxGT("Ekstruzja (os E)") +#define MSG_MOVE_01MM _UxGT("Przesun co .1mm") +#define MSG_MOVE_1MM _UxGT("Przesun co 1mm") +#define MSG_MOVE_10MM _UxGT("Przesun co 10mm") +#define MSG_SPEED _UxGT("Predkosc") +#define MSG_BED_Z _UxGT("Stol Z") +#define MSG_NOZZLE _UxGT("Dysza") +#define MSG_BED _UxGT("Stol") +#define MSG_FAN_SPEED _UxGT("Obroty wiatraka") +#define MSG_FLOW _UxGT("Przeplyw") +#define MSG_CONTROL _UxGT("Ustawienia") +#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Min") +#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" Max") +#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Mnoznik") +#define MSG_AUTOTEMP _UxGT("Auto. temperatura") +#define MSG_ON _UxGT("Wl. ") +#define MSG_OFF _UxGT("Wyl.") +#define MSG_PID_P _UxGT("PID-P") +#define MSG_PID_I _UxGT("PID-I") +#define MSG_PID_D _UxGT("PID-D") +#define MSG_PID_C _UxGT("PID-C") +#define MSG_SELECT _UxGT("Select") +#define MSG_ACC _UxGT("Przyspieszenie") +#define MSG_JERK _UxGT("Zryw") +#define MSG_VX_JERK _UxGT("Zryw Vx") +#define MSG_VY_JERK _UxGT("Zryw Vy") +#define MSG_VZ_JERK _UxGT("Zryw Vz") +#define MSG_VE_JERK _UxGT("Zryw Ve") +#define MSG_VMAX _UxGT("Vmax ") +#define MSG_VMIN _UxGT("Vmin") +#define MSG_VTRAV_MIN _UxGT("Vskok min") +#define MSG_ACCELERATION MSG_ACC +#define MSG_AMAX _UxGT("Amax") +#define MSG_A_RETRACT _UxGT("A-wycofanie") +#define MSG_A_TRAVEL _UxGT("A-przesun.") +#define MSG_STEPS_PER_MM _UxGT("kroki/mm") +#define MSG_XSTEPS _UxGT("krokiX/mm") +#define MSG_YSTEPS _UxGT("krokiY/mm") +#define MSG_ZSTEPS _UxGT("krokiZ/mm") +#define MSG_ESTEPS _UxGT("krokiE/mm") +#define MSG_E1STEPS _UxGT("krokiE1/mm") +#define MSG_E2STEPS _UxGT("krokiE2/mm") +#define MSG_E3STEPS _UxGT("krokiE3/mm") +#define MSG_E4STEPS _UxGT("krokiE4/mm") +#define MSG_E5STEPS _UxGT("krokiE5/mm") +#define MSG_TEMPERATURE _UxGT("Temperatura") +#define MSG_MOTION _UxGT("Ruch") +#define MSG_FILAMENT _UxGT("Filament") +#define MSG_VOLUMETRIC_ENABLED _UxGT("E w mm3") +#define MSG_FILAMENT_DIAM _UxGT("Sr. fil.") +#define MSG_CONTRAST _UxGT("Kontrast LCD") +#define MSG_STORE_EEPROM _UxGT("Zapisz w pamieci") +#define MSG_LOAD_EEPROM _UxGT("Wczytaj z pamieci") +#define MSG_RESTORE_FAILSAFE _UxGT("Ustaw. fabryczne") +#define MSG_REFRESH _UxGT("Odswiez") +#define MSG_WATCH _UxGT("Ekran glowny") +#define MSG_PREPARE _UxGT("Przygotuj") +#define MSG_TUNE _UxGT("Strojenie") +#define MSG_PAUSE_PRINT _UxGT("Pauza") +#define MSG_RESUME_PRINT _UxGT("Wznowienie") +#define MSG_STOP_PRINT _UxGT("Stop") +#define MSG_CARD_MENU _UxGT("Karta SD") +#define MSG_NO_CARD _UxGT("Brak karty") +#define MSG_DWELL _UxGT("Uspij...") +#define MSG_USERWAIT _UxGT("Oczekiwanie...") +#define MSG_RESUMING _UxGT("Wznawianie druku") +#define MSG_PRINT_ABORTED _UxGT("Druk przerwany") +#define MSG_NO_MOVE _UxGT("Brak ruchu") +#define MSG_KILLED _UxGT("Ubity. ") +#define MSG_STOPPED _UxGT("Zatrzymany. ") +#define MSG_CONTROL_RETRACT _UxGT("Wycofaj mm") +#define MSG_CONTROL_RETRACT_SWAP _UxGT("Z Wycof. mm") +#define MSG_CONTROL_RETRACTF _UxGT("Wycofaj V") +#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Skok Z mm") +#define MSG_CONTROL_RETRACT_RECOVER _UxGT("Cof. wycof. mm") +#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Z Cof. wyc. mm") +#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("Cof. wycof. V") +#define MSG_AUTORETRACT _UxGT("Auto. wycofanie") +#define MSG_FILAMENTCHANGE _UxGT("Zmien filament") +#define MSG_INIT_SDCARD _UxGT("Inicjal. karty SD") +#define MSG_CNG_SDCARD _UxGT("Zmiana karty SD") +#define MSG_ZPROBE_OUT _UxGT("Sonda Z za stolem") +#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test") +#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch") +#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST +#define MSG_FIRST _UxGT("first") +#define MSG_ZPROBE_ZOFFSET _UxGT("Offset Z") +#define MSG_BABYSTEP_X _UxGT("Babystep X") +#define MSG_BABYSTEP_Y _UxGT("Babystep Y") +#define MSG_BABYSTEP_Z _UxGT("Babystep Z") +#define MSG_ENDSTOP_ABORT _UxGT("Blad krancowki") +#define MSG_HEATING_FAILED_LCD _UxGT("Rozgrz. nieudane") +#define MSG_ERR_REDUNDANT_TEMP _UxGT("Blad temperatury") +#define MSG_THERMAL_RUNAWAY _UxGT("Zanik temp.") +#define MSG_ERR_MAXTEMP _UxGT("Err max temp") +#define MSG_ERR_MINTEMP _UxGT("Err min temp") +#define MSG_ERR_MAXTEMP_BED _UxGT("Err max temp stolu") +#define MSG_ERR_MINTEMP_BED _UxGT("Err min temp stolu") +#define MSG_ERR_Z_HOMING _UxGT("G28 Z Forbidden") +#define MSG_HALTED _UxGT("Drukarka zatrzym.") +#define MSG_PLEASE_RESET _UxGT("Prosze zresetowac") +#define MSG_SHORT_DAY _UxGT("d") // One character only +#define MSG_SHORT_HOUR _UxGT("g") // One character only +#define MSG_SHORT_MINUTE _UxGT("m") // One character only +#define MSG_HEATING _UxGT("Rozgrzewanie...") +#define MSG_HEATING_COMPLETE _UxGT("Rozgrzano") +#define MSG_BED_HEATING _UxGT("Rozgrzewanie stolu...") +#define MSG_BED_DONE _UxGT("Rozgrzano stol") +#define MSG_DELTA_CALIBRATE _UxGT("Kalibrowanie Delty") +#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibruj X") +#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibruj Y") +#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibruj Z") +#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibruj srodek") + +#define MSG_INFO_MENU _UxGT("O drukarce") +#define MSG_INFO_PRINTER_MENU _UxGT("Info drukarki") +#define MSG_INFO_STATS_MENU _UxGT("Statystyki") +#define MSG_INFO_BOARD_MENU _UxGT("Board Info") +#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistory") +#define MSG_INFO_EXTRUDERS _UxGT("Ekstrudery") +#define MSG_INFO_BAUDRATE _UxGT("Predkosc USB") +#define MSG_INFO_PROTOCOL _UxGT("Protokol") +#define MSG_CASE_LIGHT _UxGT("Oswietlenie") + +#if LCD_WIDTH >= 20 + #define MSG_INFO_PRINT_COUNT _UxGT("Wydrukowano") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Ukonczono") + #define MSG_INFO_PRINT_TIME _UxGT("Czas druku") + #define MSG_INFO_PRINT_LONGEST _UxGT("Najdl. druk") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Uzyty fil.") +#else + #define MSG_INFO_PRINT_COUNT _UxGT("Wydrukowano") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Ukonczono") + #define MSG_INFO_PRINT_TIME _UxGT("Razem") + #define MSG_INFO_PRINT_LONGEST _UxGT("Najdl. druk") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Uzyty fil.") +#endif + +#define MSG_INFO_MIN_TEMP _UxGT("Min Temp") +#define MSG_INFO_MAX_TEMP _UxGT("Max Temp") +#define MSG_INFO_PSU _UxGT("Zasilacz") + +#define MSG_DRIVE_STRENGTH _UxGT("Sila silnika") +#define MSG_DAC_PERCENT _UxGT("Sila %") +#define MSG_DAC_EEPROM_WRITE _UxGT("Zapisz DAC EEPROM") + +#define MSG_FILAMENT_CHANGE_HEADER _UxGT("ZMIEN FILAMENT") +#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("ZMIEN OPCJE:") +#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Ekstruduj wiecej") +#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Wznow drukowanie") + +#if LCD_HEIGHT >= 4 + // Up to 3 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Czekam na ") + #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("zmiane filamentu") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Czekam na") + #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("wyjecie filamentu") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Wloz filament") + #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("i nacisnij przycisk") + #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("aby kontynuowac...") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Czekam na") + #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("wlozenie filamentu") + #define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Czekam na") + #define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("ekstruzje filamentu") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Czekam na") + #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("wznowienie druku") +#else // LCD_HEIGHT < 4 + // Up to 2 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Prosze czekac...") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wysuwanie...") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Wloz i nacisnij prz.") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Ladowanie...") + #define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Ekstruzja...") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wznowienie...") +#endif // LCD_HEIGHT < 4 + +#if LCD_HEIGHT >= 4 + // Up to 3 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Czekam na ") + #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("zmiane filamentu") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Czekam na") + #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("wyjecie filamentu") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Wloz filament") + #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("i nacisnij przycisk") + #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("aby kontynuowac...") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Czekam na") + #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("wlozenie filamentu") + #define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Czekam na") + #define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("ekstruzje filamentu") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Czekam na") + #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("wznowienie druku") +#else // LCD_HEIGHT < 4 + // Up to 2 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Prosze czekac...") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wysuwanie...") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Wloz i nacisnij prz.") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Ladowanie...") + #define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Ekstruzja...") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wznowienie...") +#endif // LCD_HEIGHT < 4 diff --git a/Marlin/language_pl.h b/Marlin/language_pl.h index 2794a17239..f4d1fbe4b0 100644 --- a/Marlin/language_pl.h +++ b/Marlin/language_pl.h @@ -33,441 +33,13 @@ #define DISPLAY_CHARSET_ISO10646_PL #define MAPPER_C3C4C5_PL +/** + * One version with accented characters and one without + */ #if ENABLED(DOGLCD) - -#define WELCOME_MSG MACHINE_NAME _UxGT(" gotowy.") -#define MSG_SD_INSERTED _UxGT("Karta włożona") -#define MSG_SD_REMOVED _UxGT("Karta usunięta") -#define MSG_LCD_ENDSTOPS _UxGT("Kranców.") // Max length 8 characters -#define MSG_MAIN _UxGT("Menu główne") -#define MSG_AUTOSTART _UxGT("Autostart") -#define MSG_DISABLE_STEPPERS _UxGT("Wyłącz silniki") -#define MSG_AUTO_HOME _UxGT("Pozycja zerowa") -#define MSG_AUTO_HOME_X _UxGT("Zeruj X") -#define MSG_AUTO_HOME_Y _UxGT("Zeruj Y") -#define MSG_AUTO_HOME_Z _UxGT("Zeruj Z") -#define MSG_LEVEL_BED_HOMING _UxGT("Pozycja zerowa") -#define MSG_LEVEL_BED_WAITING _UxGT("Kliknij by rozp.") -#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Następny punkt") -#define MSG_LEVEL_BED_DONE _UxGT("Wypoziomowano!") -#define MSG_SET_HOME_OFFSETS _UxGT("Ust. poz. zer.") -#define MSG_HOME_OFFSETS_APPLIED _UxGT("Poz. zerowa ust.") -#define MSG_SET_ORIGIN _UxGT("Ustaw punkt zero") -#define MSG_PREHEAT_1 _UxGT("Rozgrzej PLA") -#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") -#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" wsz.") -#define MSG_PREHEAT_1_BEDONLY _UxGT("Rozgrzej stół PLA") -#define MSG_PREHEAT_1_SETTINGS _UxGT("Ustaw. rozg. PLA") -#define MSG_PREHEAT_2 _UxGT("Rozgrzej ABS") -#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") -#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" wsz.") -#define MSG_PREHEAT_2_BEDONLY _UxGT("Rozgrzej stół ABS") -#define MSG_PREHEAT_2_SETTINGS _UxGT("Ustaw. rozg. ABS") -#define MSG_COOLDOWN _UxGT("Chłodzenie") -#define MSG_SWITCH_PS_ON _UxGT("Włącz zasilacz") -#define MSG_SWITCH_PS_OFF _UxGT("Wyłącz zasilacz") -#define MSG_EXTRUDE _UxGT("Ekstruzja") -#define MSG_RETRACT _UxGT("Wycofanie") -#define MSG_MOVE_AXIS _UxGT("Ruch osi") -#define MSG_BED_LEVELING _UxGT("Poziom. stołu") -#define MSG_LEVEL_BED _UxGT("Poziom. stołu") -#define MSG_MOVE_X _UxGT("Przesuń w X") -#define MSG_MOVE_Y _UxGT("Przesuń w Y") -#define MSG_MOVE_Z _UxGT("Przesuń w Z") -#define MSG_MOVE_E _UxGT("Ekstruzja (os E)") -#define MSG_MOVE_01MM _UxGT("Przesuń co .1mm") -#define MSG_MOVE_1MM _UxGT("Przesuń co 1mm") -#define MSG_MOVE_10MM _UxGT("Przesuń co 10mm") -#define MSG_SPEED _UxGT("Predkość") -#define MSG_BED_Z _UxGT("Stół Z") -#define MSG_NOZZLE _UxGT("Dysza") -#define MSG_BED _UxGT("Stół") -#define MSG_FAN_SPEED _UxGT("Obroty wiatraka") -#define MSG_FLOW _UxGT("Przepływ") -#define MSG_CONTROL _UxGT("Ustawienia") -#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Min") -#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" Max") -#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Mnożnik") -#define MSG_AUTOTEMP _UxGT("Auto. temperatura") -#define MSG_ON _UxGT("Wł. ") -#define MSG_OFF _UxGT("Wył.") -#define MSG_PID_P _UxGT("PID-P") -#define MSG_PID_I _UxGT("PID-I") -#define MSG_PID_D _UxGT("PID-D") -#define MSG_PID_C _UxGT("PID-C") -#define MSG_SELECT _UxGT("Select") -#define MSG_ACC _UxGT("Przyśpieszenie") -#define MSG_JERK _UxGT("Zryw") -#define MSG_VX_JERK _UxGT("Zryw Vx") -#define MSG_VY_JERK _UxGT("Zryw Vy") -#define MSG_VZ_JERK _UxGT("Zryw Vz") -#define MSG_VE_JERK _UxGT("Zryw Ve") -#define MSG_VMAX _UxGT("Vmax ") -#define MSG_VMIN _UxGT("Vmin") -#define MSG_VTRAV_MIN _UxGT("Vskok min") -#define MSG_ACCELERATION MSG_ACC -#define MSG_AMAX _UxGT("Amax") -#define MSG_A_RETRACT _UxGT("A-wycofanie") -#define MSG_A_TRAVEL _UxGT("A-przesuń.") -#define MSG_STEPS_PER_MM _UxGT("kroki/mm") -#define MSG_XSTEPS _UxGT("krokiX/mm") -#define MSG_YSTEPS _UxGT("krokiY/mm") -#define MSG_ZSTEPS _UxGT("krokiZ/mm") -#define MSG_ESTEPS _UxGT("krokiE/mm") -#define MSG_E1STEPS _UxGT("krokiE1/mm") -#define MSG_E2STEPS _UxGT("krokiE2/mm") -#define MSG_E3STEPS _UxGT("krokiE3/mm") -#define MSG_E4STEPS _UxGT("krokiE4/mm") -#define MSG_E5STEPS _UxGT("krokiE5/mm") -#define MSG_TEMPERATURE _UxGT("Temperatura") -#define MSG_MOTION _UxGT("Ruch") -#define MSG_FILAMENT _UxGT("Filament") -#define MSG_VOLUMETRIC_ENABLED _UxGT("E w mm3") -#define MSG_FILAMENT_DIAM _UxGT("Śr. fil.") -#define MSG_CONTRAST _UxGT("Kontrast LCD") -#define MSG_STORE_EEPROM _UxGT("Zapisz w pamięci") -#define MSG_LOAD_EEPROM _UxGT("Wczytaj z pamięci") -#define MSG_RESTORE_FAILSAFE _UxGT("Ustaw. fabryczne") -#define MSG_REFRESH _UxGT("Odswież") -#define MSG_WATCH _UxGT("Ekran główny") -#define MSG_PREPARE _UxGT("Przygotuj") -#define MSG_TUNE _UxGT("Strojenie") -#define MSG_PAUSE_PRINT _UxGT("Pauza") -#define MSG_RESUME_PRINT _UxGT("Wznowienie") -#define MSG_STOP_PRINT _UxGT("Stop") -#define MSG_CARD_MENU _UxGT("Karta SD") -#define MSG_NO_CARD _UxGT("Brak karty") -#define MSG_DWELL _UxGT("Uśpij...") -#define MSG_USERWAIT _UxGT("Oczekiwanie...") -#define MSG_RESUMING _UxGT("Wznawianie druku") -#define MSG_PRINT_ABORTED _UxGT("Druk przerwany") -#define MSG_NO_MOVE _UxGT("Brak ruchu") -#define MSG_KILLED _UxGT("Ubity. ") -#define MSG_STOPPED _UxGT("Zatrzymany. ") -#define MSG_CONTROL_RETRACT _UxGT("Wycofaj mm") -#define MSG_CONTROL_RETRACT_SWAP _UxGT("Z Wycof. mm") -#define MSG_CONTROL_RETRACTF _UxGT("Wycofaj V") -#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Skok Z mm") -#define MSG_CONTROL_RETRACT_RECOVER _UxGT("Cof. wycof. mm") -#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Z Cof. wyc. mm") -#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("Cof. wycof. V") -#define MSG_AUTORETRACT _UxGT("Auto. wycofanie") -#define MSG_FILAMENTCHANGE _UxGT("Zmień filament") -#define MSG_INIT_SDCARD _UxGT("Inicjal. karty SD") -#define MSG_CNG_SDCARD _UxGT("Zmiana karty SD") -#define MSG_ZPROBE_OUT _UxGT("Sonda Z za stołem") -#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test") -#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch") -#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST -#define MSG_FIRST _UxGT("first") -#define MSG_ZPROBE_ZOFFSET _UxGT("Offset Z") -#define MSG_BABYSTEP_X _UxGT("Babystep X") -#define MSG_BABYSTEP_Y _UxGT("Babystep Y") -#define MSG_BABYSTEP_Z _UxGT("Babystep Z") -#define MSG_ENDSTOP_ABORT _UxGT("Błąd krańcówki") -#define MSG_HEATING_FAILED_LCD _UxGT("Rozgrz. nieudane") -#define MSG_ERR_REDUNDANT_TEMP _UxGT("Błąd temperatury") -#define MSG_THERMAL_RUNAWAY _UxGT("Zanik temp.") -#define MSG_ERR_MAXTEMP _UxGT("Err max temp") -#define MSG_ERR_MINTEMP _UxGT("Err min temp") -#define MSG_ERR_MAXTEMP_BED _UxGT("Err max temp stołu") -#define MSG_ERR_MINTEMP_BED _UxGT("Err min temp stołu") -#define MSG_ERR_Z_HOMING _UxGT("G28 Z Forbidden") -#define MSG_HALTED _UxGT("Drukarka zatrzym.") -#define MSG_PLEASE_RESET _UxGT("Proszę zresetować") -#define MSG_SHORT_DAY _UxGT("d") // One character only -#define MSG_SHORT_HOUR _UxGT("g") // One character only -#define MSG_SHORT_MINUTE _UxGT("m") // One character only -#define MSG_HEATING _UxGT("Rozgrzewanie...") -#define MSG_HEATING_COMPLETE _UxGT("Rozgrzano") -#define MSG_BED_HEATING _UxGT("Rozgrzewanie stołu...") -#define MSG_BED_DONE _UxGT("Rozgrzano stół") -#define MSG_DELTA_CALIBRATE _UxGT("Kalibrowanie Delty") -#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibruj X") -#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibruj Y") -#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibruj Z") -#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibruj środek") - -#define MSG_INFO_MENU _UxGT("O drukarce") -#define MSG_INFO_PRINTER_MENU _UxGT("Info drukarki") -#define MSG_INFO_STATS_MENU _UxGT("Statystyki") -#define MSG_INFO_BOARD_MENU _UxGT("Board Info") -#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistory") -#define MSG_INFO_EXTRUDERS _UxGT("Ekstrudery") -#define MSG_INFO_BAUDRATE _UxGT("Predkość USB") -#define MSG_INFO_PROTOCOL _UxGT("Protokół") -#define MSG_LIGHTS_ON _UxGT("Oświetlenie wl.") -#define MSG_LIGHTS_OFF _UxGT("Oświetlenie wyl.") - -#if LCD_WIDTH >= 20 - #define MSG_INFO_PRINT_COUNT _UxGT("Wydrukowano") - #define MSG_INFO_COMPLETED_PRINTS _UxGT("Ukończono") - #define MSG_INFO_PRINT_TIME _UxGT("Czas druku") - #define MSG_INFO_PRINT_LONGEST _UxGT("Najdł. druk") - #define MSG_INFO_PRINT_FILAMENT _UxGT("Użyty fil.") -#else - #define MSG_INFO_PRINT_COUNT _UxGT("Wydrukowano") - #define MSG_INFO_COMPLETED_PRINTS _UxGT("Ukończono") - #define MSG_INFO_PRINT_TIME _UxGT("Razem") - #define MSG_INFO_PRINT_LONGEST _UxGT("Najdł. druk") - #define MSG_INFO_PRINT_FILAMENT _UxGT("Użyty fil.") -#endif - -#define MSG_INFO_MIN_TEMP _UxGT("Min Temp") -#define MSG_INFO_MAX_TEMP _UxGT("Max Temp") -#define MSG_INFO_PSU _UxGT("Zasilacz") - -#define MSG_DRIVE_STRENGTH _UxGT("Siła silnika") -#define MSG_DAC_PERCENT _UxGT("Siła %") -#define MSG_DAC_EEPROM_WRITE _UxGT("Zapisz DAC EEPROM") - -#define MSG_FILAMENT_CHANGE_HEADER _UxGT("ZMIEŃ FILAMENT") -#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("ZMIEŃ OPCJE:") -#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Ekstruduj więcej") -#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Wznów drukowanie") - -#if LCD_HEIGHT >= 4 - // Up to 3 lines allowed - #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Czekam na ") - #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("zmianę filamentu") - #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Czekam na") - #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("wyjęcie filamentu") - #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Włóz filament") - #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("i naciśnij przycisk") - #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("aby kontynuować...") - #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Czekam na") - #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("włożenie filamentu") - #define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Czekam na") - #define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("ekstruzję filamentu") - #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Czekam na") - #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("wznowienie druku") -#else // LCD_HEIGHT < 4 - // Up to 2 lines allowed - #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Proszę czekać...") - #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wysuwanie...") - #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Włóż i naciśnij prz.") - #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Ładowanie...") - #define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Ekstruzja...") - #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wznowienie...") -#endif // LCD_HEIGHT < 4 - - #else - -#define WELCOME_MSG MACHINE_NAME _UxGT(" gotowy.") -#define MSG_SD_INSERTED _UxGT("Karta wlozona") -#define MSG_SD_REMOVED _UxGT("Karta usunieta") -#define MSG_LCD_ENDSTOPS _UxGT("Krancow.") // Max length 8 characters -#define MSG_MAIN _UxGT("Menu glowne") -#define MSG_AUTOSTART _UxGT("Autostart") -#define MSG_DISABLE_STEPPERS _UxGT("Wylacz silniki") -#define MSG_AUTO_HOME _UxGT("Pozycja zerowa") -#define MSG_AUTO_HOME_X _UxGT("Zeruj X") -#define MSG_AUTO_HOME_Y _UxGT("Zeruj Y") -#define MSG_AUTO_HOME_Z _UxGT("Zeruj Z") -#define MSG_LEVEL_BED_HOMING _UxGT("Pozycja zerowa") -#define MSG_LEVEL_BED_WAITING _UxGT("Kliknij by rozp.") -#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Nastepny punkt") -#define MSG_LEVEL_BED_DONE _UxGT("Wypoziomowano!") -#define MSG_SET_HOME_OFFSETS _UxGT("Ust. poz. zer.") -#define MSG_HOME_OFFSETS_APPLIED _UxGT("Poz. zerowa ust.") -#define MSG_SET_ORIGIN _UxGT("Ustaw punkt zero") -#define MSG_PREHEAT_1 _UxGT("Rozgrzej PLA") -#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") -#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" wsz.") -#define MSG_PREHEAT_1_BEDONLY _UxGT("Rozgrzej stol PLA") -#define MSG_PREHEAT_1_SETTINGS _UxGT("Ustaw. rozg. PLA") -#define MSG_PREHEAT_2 _UxGT("Rozgrzej ABS") -#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") -#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" wsz.") -#define MSG_PREHEAT_2_BEDONLY _UxGT("Rozgrzej stol ABS") -#define MSG_PREHEAT_2_SETTINGS _UxGT("Ustaw. rozg. ABS") -#define MSG_COOLDOWN _UxGT("Chlodzenie") -#define MSG_SWITCH_PS_ON _UxGT("Wlacz zasilacz") -#define MSG_SWITCH_PS_OFF _UxGT("Wylacz zasilacz") -#define MSG_EXTRUDE _UxGT("Ekstruzja") -#define MSG_RETRACT _UxGT("Wycofanie") -#define MSG_MOVE_AXIS _UxGT("Ruch osi") -#define MSG_BED_LEVELING _UxGT("Poziom. stolu") -#define MSG_LEVEL_BED _UxGT("Poziom. stolu") -#define MSG_MOVE_X _UxGT("Przesun w X") -#define MSG_MOVE_Y _UxGT("Przesun w Y") -#define MSG_MOVE_Z _UxGT("Przesun w Z") -#define MSG_MOVE_E _UxGT("Ekstruzja (os E)") -#define MSG_MOVE_01MM _UxGT("Przesun co .1mm") -#define MSG_MOVE_1MM _UxGT("Przesun co 1mm") -#define MSG_MOVE_10MM _UxGT("Przesun co 10mm") -#define MSG_SPEED _UxGT("Predkosc") -#define MSG_BED_Z _UxGT("Stol Z") -#define MSG_NOZZLE _UxGT("Dysza") -#define MSG_BED _UxGT("Stol") -#define MSG_FAN_SPEED _UxGT("Obroty wiatraka") -#define MSG_FLOW _UxGT("Przeplyw") -#define MSG_CONTROL _UxGT("Ustawienia") -#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Min") -#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" Max") -#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Mnoznik") -#define MSG_AUTOTEMP _UxGT("Auto. temperatura") -#define MSG_ON _UxGT("Wl. ") -#define MSG_OFF _UxGT("Wyl.") -#define MSG_PID_P _UxGT("PID-P") -#define MSG_PID_I _UxGT("PID-I") -#define MSG_PID_D _UxGT("PID-D") -#define MSG_PID_C _UxGT("PID-C") -#define MSG_SELECT _UxGT("Select") -#define MSG_ACC _UxGT("Przyspieszenie") -#define MSG_JERK _UxGT("Zryw") -#define MSG_VX_JERK _UxGT("Zryw Vx") -#define MSG_VY_JERK _UxGT("Zryw Vy") -#define MSG_VZ_JERK _UxGT("Zryw Vz") -#define MSG_VE_JERK _UxGT("Zryw Ve") -#define MSG_VMAX _UxGT("Vmax ") -#define MSG_VMIN _UxGT("Vmin") -#define MSG_VTRAV_MIN _UxGT("Vskok min") -#define MSG_ACCELERATION MSG_ACC -#define MSG_AMAX _UxGT("Amax") -#define MSG_A_RETRACT _UxGT("A-wycofanie") -#define MSG_A_TRAVEL _UxGT("A-przesun.") -#define MSG_STEPS_PER_MM _UxGT("kroki/mm") -#define MSG_XSTEPS _UxGT("krokiX/mm") -#define MSG_YSTEPS _UxGT("krokiY/mm") -#define MSG_ZSTEPS _UxGT("krokiZ/mm") -#define MSG_ESTEPS _UxGT("krokiE/mm") -#define MSG_E1STEPS _UxGT("krokiE1/mm") -#define MSG_E2STEPS _UxGT("krokiE2/mm") -#define MSG_E3STEPS _UxGT("krokiE3/mm") -#define MSG_E4STEPS _UxGT("krokiE4/mm") -#define MSG_E5STEPS _UxGT("krokiE5/mm") -#define MSG_TEMPERATURE _UxGT("Temperatura") -#define MSG_MOTION _UxGT("Ruch") -#define MSG_FILAMENT _UxGT("Filament") -#define MSG_VOLUMETRIC_ENABLED _UxGT("E w mm3") -#define MSG_FILAMENT_DIAM _UxGT("Sr. fil.") -#define MSG_CONTRAST _UxGT("Kontrast LCD") -#define MSG_STORE_EEPROM _UxGT("Zapisz w pamieci") -#define MSG_LOAD_EEPROM _UxGT("Wczytaj z pamieci") -#define MSG_RESTORE_FAILSAFE _UxGT("Ustaw. fabryczne") -#define MSG_REFRESH _UxGT("Odswiez") -#define MSG_WATCH _UxGT("Ekran glowny") -#define MSG_PREPARE _UxGT("Przygotuj") -#define MSG_TUNE _UxGT("Strojenie") -#define MSG_PAUSE_PRINT _UxGT("Pauza") -#define MSG_RESUME_PRINT _UxGT("Wznowienie") -#define MSG_STOP_PRINT _UxGT("Stop") -#define MSG_CARD_MENU _UxGT("Karta SD") -#define MSG_NO_CARD _UxGT("Brak karty") -#define MSG_DWELL _UxGT("Uspij...") -#define MSG_USERWAIT _UxGT("Oczekiwanie...") -#define MSG_RESUMING _UxGT("Wznawianie druku") -#define MSG_PRINT_ABORTED _UxGT("Druk przerwany") -#define MSG_NO_MOVE _UxGT("Brak ruchu") -#define MSG_KILLED _UxGT("Ubity. ") -#define MSG_STOPPED _UxGT("Zatrzymany. ") -#define MSG_CONTROL_RETRACT _UxGT("Wycofaj mm") -#define MSG_CONTROL_RETRACT_SWAP _UxGT("Z Wycof. mm") -#define MSG_CONTROL_RETRACTF _UxGT("Wycofaj V") -#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Skok Z mm") -#define MSG_CONTROL_RETRACT_RECOVER _UxGT("Cof. wycof. mm") -#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Z Cof. wyc. mm") -#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("Cof. wycof. V") -#define MSG_AUTORETRACT _UxGT("Auto. wycofanie") -#define MSG_FILAMENTCHANGE _UxGT("Zmien filament") -#define MSG_INIT_SDCARD _UxGT("Inicjal. karty SD") -#define MSG_CNG_SDCARD _UxGT("Zmiana karty SD") -#define MSG_ZPROBE_OUT _UxGT("Sonda Z za stolem") -#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test") -#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch") -#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST -#define MSG_FIRST _UxGT("first") -#define MSG_ZPROBE_ZOFFSET _UxGT("Offset Z") -#define MSG_BABYSTEP_X _UxGT("Babystep X") -#define MSG_BABYSTEP_Y _UxGT("Babystep Y") -#define MSG_BABYSTEP_Z _UxGT("Babystep Z") -#define MSG_ENDSTOP_ABORT _UxGT("Blad krancowki") -#define MSG_HEATING_FAILED_LCD _UxGT("Rozgrz. nieudane") -#define MSG_ERR_REDUNDANT_TEMP _UxGT("Blad temperatury") -#define MSG_THERMAL_RUNAWAY _UxGT("Zanik temp.") -#define MSG_ERR_MAXTEMP _UxGT("Err max temp") -#define MSG_ERR_MINTEMP _UxGT("Err min temp") -#define MSG_ERR_MAXTEMP_BED _UxGT("Err max temp stolu") -#define MSG_ERR_MINTEMP_BED _UxGT("Err min temp stolu") -#define MSG_ERR_Z_HOMING _UxGT("G28 Z Forbidden") -#define MSG_HALTED _UxGT("Drukarka zatrzym.") -#define MSG_PLEASE_RESET _UxGT("Prosze zresetowac") -#define MSG_SHORT_DAY _UxGT("d") // One character only -#define MSG_SHORT_HOUR _UxGT("g") // One character only -#define MSG_SHORT_MINUTE _UxGT("m") // One character only -#define MSG_HEATING _UxGT("Rozgrzewanie...") -#define MSG_HEATING_COMPLETE _UxGT("Rozgrzano") -#define MSG_BED_HEATING _UxGT("Rozgrzewanie stolu...") -#define MSG_BED_DONE _UxGT("Rozgrzano stol") -#define MSG_DELTA_CALIBRATE _UxGT("Kalibrowanie Delty") -#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibruj X") -#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibruj Y") -#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibruj Z") -#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibruj srodek") - -#define MSG_INFO_MENU _UxGT("O drukarce") -#define MSG_INFO_PRINTER_MENU _UxGT("Info drukarki") -#define MSG_INFO_STATS_MENU _UxGT("Statystyki") -#define MSG_INFO_BOARD_MENU _UxGT("Board Info") -#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistory") -#define MSG_INFO_EXTRUDERS _UxGT("Ekstrudery") -#define MSG_INFO_BAUDRATE _UxGT("Predkosc USB") -#define MSG_INFO_PROTOCOL _UxGT("Protokol") -#define MSG_LIGHTS_ON _UxGT("Oswietlenie wl.") -#define MSG_LIGHTS_OFF _UxGT("Oswietlenie wyl.") - -#if LCD_WIDTH >= 20 - #define MSG_INFO_PRINT_COUNT _UxGT("Wydrukowano") - #define MSG_INFO_COMPLETED_PRINTS _UxGT("Ukonczono") - #define MSG_INFO_PRINT_TIME _UxGT("Czas druku") - #define MSG_INFO_PRINT_LONGEST _UxGT("Najdl. druk") - #define MSG_INFO_PRINT_FILAMENT _UxGT("Uzyty fil.") + #include "language_pl-DOGM.h" #else - #define MSG_INFO_PRINT_COUNT _UxGT("Wydrukowano") - #define MSG_INFO_COMPLETED_PRINTS _UxGT("Ukonczono") - #define MSG_INFO_PRINT_TIME _UxGT("Razem") - #define MSG_INFO_PRINT_LONGEST _UxGT("Najdl. druk") - #define MSG_INFO_PRINT_FILAMENT _UxGT("Uzyty fil.") -#endif - -#define MSG_INFO_MIN_TEMP _UxGT("Min Temp") -#define MSG_INFO_MAX_TEMP _UxGT("Max Temp") -#define MSG_INFO_PSU _UxGT("Zasilacz") - -#define MSG_DRIVE_STRENGTH _UxGT("Sila silnika") -#define MSG_DAC_PERCENT _UxGT("Sila %") -#define MSG_DAC_EEPROM_WRITE _UxGT("Zapisz DAC EEPROM") - -#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED") -#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:") -#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Ekstruduj wiecej") -#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Wznow drukowanie") - -#if LCD_HEIGHT >= 4 - // Up to 3 lines allowed - #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Czekam na ") - #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("zmiane filamentu") - #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Czekam na") - #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("wyjecie filamentu") - #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Wloz filament") - #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("i nacisnij przycisk") - #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("aby kontynuowac...") - #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Czekam na") - #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("wlozenie filamentu") - #define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Czekam na") - #define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("ekstruzje filamentu") - #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Czekam na") - #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("wznowienie druku") -#else // LCD_HEIGHT < 4 - // Up to 2 lines allowed - #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Prosze czekac...") - #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wysuwanie...") - #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Wloz i nacisnij prz.") - #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Ladowanie...") - #define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Ekstruzja...") - #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wznowienie...") -#endif // LCD_HEIGHT < 4 + #include "language_pl-HD44780.h" #endif #endif // LANGUAGE_PL_H diff --git a/Marlin/language_tr.h b/Marlin/language_tr.h index edbea97d7b..728bab096c 100644 --- a/Marlin/language_tr.h +++ b/Marlin/language_tr.h @@ -206,8 +206,7 @@ #define MSG_INFO_EXTRUDERS _UxGT("Ekstruderler") // Ekstruderler #define MSG_INFO_BAUDRATE _UxGT("İletişim Hızı") // İletişim Hızı #define MSG_INFO_PROTOCOL _UxGT("Protokol") // Protokol -#define MSG_LIGHTS_ON _UxGT("Aydınlatmayı Aç") // Aydınlatmayı Aç -#define MSG_LIGHTS_OFF _UxGT("Aydınlatmayı Kapa") // Aydınlaymayı Kapa +#define MSG_CASE_LIGHT _UxGT("Aydınlatmayı") // Aydınlatmayı Aç #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("Baskı Sayısı") // Baskı Sayısı diff --git a/Marlin/language_uk.h b/Marlin/language_uk.h index 638961e935..06048470a9 100644 --- a/Marlin/language_uk.h +++ b/Marlin/language_uk.h @@ -180,8 +180,7 @@ #define MSG_INFO_EXTRUDERS _UxGT("Екструдери") #define MSG_INFO_BAUDRATE _UxGT("біт/с") #define MSG_INFO_PROTOCOL _UxGT("Протокол") -#define MSG_LIGHTS_ON _UxGT("Підсвітка увік.") -#define MSG_LIGHTS_OFF _UxGT("Підсвітка вимк.") +#define MSG_CASE_LIGHT _UxGT("Підсвітка") #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("К-сть друків") diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index 0ead6498ff..4e21ba0792 100755 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -708,19 +708,6 @@ void kill_screen(const char* lcd_msg) { #endif // SDSUPPORT - #if ENABLED(MENU_ITEM_CASE_LIGHT) - - extern bool case_light_on; - extern void update_case_light(); - - void toggle_case_light() { - case_light_on ^= true; - lcdDrawUpdate = LCDVIEW_KEEP_REDRAWING; - update_case_light(); - } - - #endif // MENU_ITEM_CASE_LIGHT - #if ENABLED(BLTOUCH) /** @@ -790,6 +777,11 @@ void kill_screen(const char* lcd_msg) { * */ + #if ENABLED(MENU_ITEM_CASE_LIGHT) + extern bool case_light_on; + extern void update_case_light(); + #endif + void lcd_main_menu() { START_MENU(); MENU_BACK(MSG_WATCH); @@ -805,10 +797,7 @@ void kill_screen(const char* lcd_msg) { // Switch case light on/off // #if ENABLED(MENU_ITEM_CASE_LIGHT) - if (case_light_on) - MENU_ITEM(function, MSG_LIGHTS_OFF, toggle_case_light); - else - MENU_ITEM(function, MSG_LIGHTS_ON, toggle_case_light); + MENU_ITEM_EDIT_CALLBACK(bool, MSG_CASE_LIGHT, case_light_on, update_case_light); #endif if (planner.movesplanned() || IS_SD_PRINTING) {