From 3f68ce21a03139af14da6a3e4734f0a9cf53a24f Mon Sep 17 00:00:00 2001 From: Sergey Date: Mon, 27 Sep 2021 13:13:14 +0300 Subject: [PATCH] Configuration --- Marlin/Configuration.h | 270 ++++++++++++++++++++----------------- Marlin/Configuration_adv.h | 144 ++++++++++---------- platformio.ini | 2 +- 3 files changed, 223 insertions(+), 193 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 8f530369e3..8deb7a6a14 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -69,7 +69,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Sergey, FlyingbearGhost4S/5)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,7 +102,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 3 /** * Serial Port Baud Rate @@ -115,7 +115,7 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 //#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate /** @@ -123,8 +123,8 @@ * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 -//#define BAUDRATE_2 250000 // Enable to override BAUDRATE +#define SERIAL_PORT_2 1 +#define BAUDRATE_2 115200 // Enable to override BAUDRATE /** * Select a third serial port on the board to use for communication with the host. @@ -139,11 +139,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MKS_ROBIN_NANO #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "FBGhost 4s/5" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -490,7 +490,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -589,21 +589,21 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 22.20, 20.0 } + #define DEFAULT_Ki_LIST { 1.08, 1.0 } + #define DEFAULT_Kd_LIST { 114.00, 112.0 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 17.04 + #define DEFAULT_Ki 1.31 + #define DEFAULT_Kd 55.34 #endif #endif // PIDTEMP @@ -624,7 +624,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -642,10 +642,9 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - + #define DEFAULT_bedKp 40.68 + #define DEFAULT_bedKi 7.93 + #define DEFAULT_bedKd 139.15 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -697,7 +696,7 @@ //#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation. //#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + #define PID_FUNCTIONAL_RANGE 20 // If the temperature difference between the target temperature and the actual temperature // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. #endif @@ -718,7 +717,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 710 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -819,19 +818,19 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define I_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define J_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define K_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define I_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define J_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define K_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -873,7 +872,7 @@ // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE +#define ENDSTOP_INTERRUPTS_FEATURE /** * Endstop Noise Threshold @@ -890,7 +889,7 @@ //#define ENDSTOP_NOISE_THRESHOLD 2 // Check for stuck or disconnected endstops during homing moves. -//#define DETECT_BROKEN_ENDSTOP +#define DETECT_BROKEN_ENDSTOP //============================================================================= //============================== Movement Settings ============================ @@ -917,18 +916,18 @@ * Override with M92 * X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 400 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 200, 200, 4, 50 } -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 +#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits + #define MAX_FEEDRATE_EDIT_VALUES { 300, 300, 10, 70 } // ...or, set your own edit limits #endif /** @@ -937,11 +936,11 @@ * Override with M201 * X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 3000 } -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 +#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits + #define MAX_ACCEL_EDIT_VALUES { 5000, 5000, 100, 5000 } // ...or, set your own edit limits #endif /** @@ -952,9 +951,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -964,24 +963,24 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -//#define CLASSIC_JERK +#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_ZJERK 0.5 //#define DEFAULT_IJERK 0.3 //#define DEFAULT_JJERK 0.3 //#define DEFAULT_KJERK 0.3 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 + #define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits + #define MAX_JERK_EDIT_VALUES { 30, 30, 2, 20 } // ...or, set your own edit limits #endif #endif -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance +#define DEFAULT_EJERK 10 // May be used by Linear Advance /** * Junction Deviation Factor @@ -991,7 +990,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.12 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1004,7 +1003,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1054,7 +1053,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1169,14 +1168,14 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 0 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (40*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_FEEDRATE_FAST (4*60) @@ -1220,8 +1219,8 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 +#define MULTIPLE_PROBING 3 +#define EXTRA_PROBING 1 /** * Z probes require clearance when deploying, stowing, and moving between @@ -1237,16 +1236,16 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 7 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_CLEARANCE_MULTI_PROBE 3 // Z Clearance between multiple probes +#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 +#define Z_PROBE_OFFSET_RANGE_MIN -3 +#define Z_PROBE_OFFSET_RANGE_MAX 3 // Enable the M48 repeatability test to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST @@ -1310,10 +1309,43 @@ // @section machine +#define ALL_DRV_2208 +//#define FB_4S_STOCK +//#define FB_5_STOCK + +#ifdef ALL_DRV_2208 +#define USR_E0_DIR true +#define USR_X_DIR false +#define USR_Y_DIR false +#define USR_Z_DIR true +#endif + +#ifdef FB_4S_STOCK +#define USR_E0_DIR false +#define USR_X_DIR true +#define USR_Y_DIR true +#define USR_Z_DIR false +#endif + +#ifdef FB_5_STOCK +#if MOTHERBOARD == BOARD_MKS_ROBIN_NANO_S_V13 +#define USR_E0_DIR false +#define USR_X_DIR true +#define USR_Y_DIR true +#define USR_Z_DIR false +#else +#define USR_E0_DIR false +#define USR_X_DIR false +#define USR_Y_DIR false +#define USR_Z_DIR false +#endif +#endif + + // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_X_DIR USR_X_DIR +#define INVERT_Y_DIR USR_Y_DIR +#define INVERT_Z_DIR USR_Z_DIR //#define INVERT_I_DIR false //#define INVERT_J_DIR false //#define INVERT_K_DIR false @@ -1321,8 +1353,8 @@ // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false +#define INVERT_E0_DIR USR_E0_DIR +#define INVERT_E1_DIR true #define INVERT_E2_DIR false #define INVERT_E3_DIR false #define INVERT_E4_DIR false @@ -1332,8 +1364,8 @@ // @section homing -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed. Also enable HOME_AFTER_DEACTIVATE for extra safety. -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated. Also enable NO_MOTION_BEFORE_HOMING for extra safety. +#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed. Also enable HOME_AFTER_DEACTIVATE for extra safety. +#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated. Also enable NO_MOTION_BEFORE_HOMING for extra safety. /** * Set Z_IDLE_HEIGHT if the Z-Axis moves on its own when steppers are disabled. @@ -1342,10 +1374,10 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 2 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. -//#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z +#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] @@ -1359,14 +1391,14 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 250 +#define Y_BED_SIZE 210 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 #define Y_MIN_POS 0 #define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE +#define X_MAX_POS X_BED_SIZE+X_MIN_POS #define Y_MAX_POS Y_BED_SIZE #define Z_MAX_POS 200 //#define I_MIN_POS 0 @@ -1408,7 +1440,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1424,9 +1456,9 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. + #define FIL_RUNOUT_ENABLED_DEFAULT false // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. @@ -1476,7 +1508,7 @@ // After a runout is detected, continue printing this length of filament // before executing the runout script. Useful for a sensor at the end of // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 + #define FILAMENT_RUNOUT_DISTANCE_MM 500 #ifdef FILAMENT_RUNOUT_DISTANCE_MM // Enable this option to use an encoder disc that toggles the runout pin @@ -1528,14 +1560,14 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1552,7 +1584,7 @@ * Turn on with the command 'M111 S32'. * NOTE: Requires a lot of PROGMEM! */ -//#define DEBUG_LEVELING_FEATURE +#define DEBUG_LEVELING_FEATURE #if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL, PROBE_MANUALLY) // Set a height for the start of manual adjustment @@ -1577,14 +1609,14 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for G26. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for G26. + #define MESH_TEST_HOTEND_TEMP 240 // (°C) Default nozzle temperature for G26. + #define MESH_TEST_BED_TEMP 90 // (°C) Default bed temperature for G26. #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for G26 XY moves. - #define G26_XY_FEEDRATE_TRAVEL 100 // (mm/s) Feedrate for G26 XY travel moves. + #define G26_XY_FEEDRATE_TRAVEL 80 // (mm/s) Feedrate for G26 XY travel moves. #define G26_RETRACT_MULTIPLIER 1.0 // G26 Q (retraction) used by default between mesh test elements. #endif @@ -1593,7 +1625,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 4 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1603,13 +1635,13 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. // Synthesizes intermediate points to produce a more detailed mesh. // - //#define ABL_BILINEAR_SUBDIVISION + #define ABL_BILINEAR_SUBDIVISION #if ENABLED(ABL_BILINEAR_SUBDIVISION) // Number of subdivisions between probe points #define BILINEAR_SUBDIVISIONS 3 @@ -1625,7 +1657,7 @@ //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define MESH_INSET 5 // Set Mesh bounds as an inset region of the bed #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X @@ -1645,7 +1677,7 @@ //=================================== Mesh ================================== //=========================================================================== - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define MESH_INSET 20 // Set Mesh bounds as an inset region of the bed #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X @@ -1657,16 +1689,16 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1727,15 +1759,15 @@ * - Allows Z homing only when XY positions are known and trusted. * - If stepper drivers sleep, XY homing may be required again before Z homing. */ -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing - #define Z_SAFE_HOMING_Y_POINT Y_CENTER // Y point for Z homing + #define Z_SAFE_HOMING_X_POINT 0 // X point for Z homing + #define Z_SAFE_HOMING_Y_POINT 0 // Y point for Z homing #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (40*60), (40*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1812,12 +1844,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1845,16 +1877,14 @@ // // Preheat Constants - Up to 5 are supported without changes // -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_TEMP_CHAMBER 35 +#define PREHEAT_1_LABEL "PETG" +#define PREHEAT_1_TEMP_HOTEND 235 +#define PREHEAT_1_TEMP_BED 80 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_TEMP_CHAMBER 35 +#define PREHEAT_2_TEMP_HOTEND 250 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 /** @@ -1868,11 +1898,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 10, 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1994,7 +2024,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -2085,14 +2115,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -2155,7 +2185,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2648,7 +2678,7 @@ // 480x320, 3.5", FSMC Display From MKS // Normally used in MKS Robin Nano V1.2 // -//#define MKS_ROBIN_TFT35 +#define MKS_ROBIN_TFT35 // // 480x272, 4.3", FSMC Display From MKS @@ -2720,11 +2750,11 @@ * root of your SD card, together with the compiled firmware. */ //#define TFT_CLASSIC_UI -//#define TFT_COLOR_UI +#define TFT_COLOR_UI //#define TFT_LVGL_UI #if ENABLED(TFT_LVGL_UI) - //#define MKS_WIFI_MODULE // MKS WiFi module + #define MKS_WIFI_MODULE // MKS WiFi module #endif /** @@ -2749,25 +2779,25 @@ // // Touch Screen Settings // -//#define TOUCH_SCREEN +#define TOUCH_SCREEN #if ENABLED(TOUCH_SCREEN) #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus #define TOUCH_SCREEN_CALIBRATION - //#define TOUCH_CALIBRATION_X 12316 - //#define TOUCH_CALIBRATION_Y -8981 - //#define TOUCH_OFFSET_X -43 - //#define TOUCH_OFFSET_Y 257 - //#define TOUCH_ORIENTATION TOUCH_LANDSCAPE + #define TOUCH_CALIBRATION_X 12316 + #define TOUCH_CALIBRATION_Y -8981 + #define TOUCH_OFFSET_X -43 + #define TOUCH_OFFSET_Y 257 + #define TOUCH_ORIENTATION TOUCH_LANDSCAPE #if BOTH(TOUCH_SCREEN_CALIBRATION, EEPROM_SETTINGS) #define TOUCH_CALIBRATION_AUTO_SAVE // Auto save successful calibration values to EEPROM #endif #if ENABLED(TFT_COLOR_UI) - //#define SINGLE_TOUCH_NAVIGATION + #define SINGLE_TOUCH_NAVIGATION #endif #endif diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 0ea87cfa99..e75ba6f31f 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -454,7 +454,7 @@ * Hotend Idle Timeout * Prevent filament in the nozzle from charring and causing a critical jam. */ -//#define HOTEND_IDLE_TIMEOUT +#define HOTEND_IDLE_TIMEOUT #if ENABLED(HOTEND_IDLE_TIMEOUT) #define HOTEND_IDLE_TIMEOUT_SEC (5*60) // (seconds) Time without extruder movement to trigger protection #define HOTEND_IDLE_MIN_TRIGGER 180 // (°C) Minimum temperature to enable hotend protection @@ -496,7 +496,7 @@ // When first starting the main fan, run it at full speed for the // given number of milliseconds. This gets the fan spinning reliably // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 +#define FAN_KICKSTART_TIME 100 // Some coolers may require a non-zero "off" state. //#define FAN_OFF_PWM 1 @@ -562,7 +562,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN FAN1_PIN #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -769,7 +769,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -910,7 +910,7 @@ #if ENABLED(ASSISTED_TRAMMING) // Define positions for probe points. - #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } + #define TRAMMING_POINT_XY { { 37, 10 }, { 223, 10 }, { 223, 180 }, { 37, 180 } } // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" @@ -921,7 +921,7 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_WIZARD // Add a Tramming Wizard to the LCD menu + #define ASSISTED_TRAMMING_WIZARD // Add a Tramming Wizard to the LCD menu //#define ASSISTED_TRAMMING_WAIT_POSITION { X_CENTER, Y_CENTER, 30 } // Move the nozzle out of the way for adjustment @@ -1100,7 +1100,7 @@ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the * lowest stepping frequencies. */ -//#define ADAPTIVE_STEP_SMOOTHING +#define ADAPTIVE_STEP_SMOOTHING /** * Custom Microstepping @@ -1216,7 +1216,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1225,7 +1225,7 @@ //#define TURBO_BACK_MENU_ITEM // Add a mute option to the LCD menu - //#define SOUND_MENU_ITEM + #define SOUND_MENU_ITEM /** * LED Control Menu @@ -1263,20 +1263,20 @@ //#define LCD_TIMEOUT_TO_STATUS 15000 #if ENABLED(SHOW_BOOTSCREEN) - #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) + #define BOOTSCREEN_TIMEOUT 1000 // (ms) Total Duration to display the boot screen(s) #if EITHER(HAS_MARLINUI_U8GLIB, TFT_COLOR_UI) #define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving lots of flash) #endif #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1361,7 +1361,7 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss @@ -1427,10 +1427,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1452,7 +1452,7 @@ /** * Auto-report SdCard status with M27 S */ - //#define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS /** * Support for USB thumb drives using an Arduino USB Host Shield or @@ -1695,12 +1695,12 @@ // Specify additional languages for the UI. Default specified by LCD_LANGUAGE. // #if ANY(DOGLCD, TFT_COLOR_UI, TOUCH_UI_FTDI_EVE) - //#define LCD_LANGUAGE_2 fr + #define LCD_LANGUAGE_2 ru //#define LCD_LANGUAGE_3 de //#define LCD_LANGUAGE_4 es //#define LCD_LANGUAGE_5 it #ifdef LCD_LANGUAGE_2 - //#define LCD_LANGUAGE_AUTO_SAVE // Automatically save language to EEPROM on change + #define LCD_LANGUAGE_AUTO_SAVE // Automatically save language to EEPROM on change #endif #endif @@ -1836,18 +1836,18 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). + #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep - #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep + #define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps + #define BABYSTEP_MULTIPLICATOR_Z 0.01 // (steps or mm) Steps or millimeter distance for each Z babystep + //#define BABYSTEP_MULTIPLICATOR_XY 0.01 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1883,12 +1883,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1926,18 +1926,18 @@ * the probe to be unable to reach any points. */ #if PROBE_SELECTED && !IS_KINEMATIC - //#define PROBING_MARGIN_LEFT PROBING_MARGIN - //#define PROBING_MARGIN_RIGHT PROBING_MARGIN - //#define PROBING_MARGIN_FRONT PROBING_MARGIN - //#define PROBING_MARGIN_BACK PROBING_MARGIN + #define PROBING_MARGIN_LEFT PROBING_MARGIN + #define PROBING_MARGIN_RIGHT PROBING_MARGIN + #define PROBING_MARGIN_FRONT PROBING_MARGIN + #define PROBING_MARGIN_BACK PROBING_MARGIN #endif #if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) + #define MESH_MIN_X 0 + #define MESH_MIN_Y MESH_INSET + #define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + #define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) #endif #if BOTH(AUTO_BED_LEVELING_UBL, EEPROM_SETTINGS) @@ -2041,7 +2041,7 @@ #endif // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT +#define BEZIER_CURVE_SUPPORT /** * Direct Stepping @@ -2096,7 +2096,7 @@ * * Override the default value based on the driver type set in Configuration.h. */ -//#define MINIMUM_STEPPER_PULSE 2 +#define MINIMUM_STEPPER_PULSE 1 /** * Maximum stepping rate (in Hz) the stepper driver allows @@ -2128,7 +2128,7 @@ #if BOTH(SDSUPPORT, DIRECT_STEPPING) #define BLOCK_BUFFER_SIZE 8 #elif ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 + #define BLOCK_BUFFER_SIZE 32 #else #define BLOCK_BUFFER_SIZE 16 #endif @@ -2137,7 +2137,7 @@ // The ASCII buffer for serial input #define MAX_CMD_SIZE 96 -#define BUFSIZE 4 +#define BUFSIZE 32 // Transmission to Host Buffer Size // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. @@ -2146,18 +2146,18 @@ // For debug-echo: 128 bytes for the optimal speed. // Other output doesn't need to be that speedy. // :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 +#define TX_BUFFER_SIZE 256 // Host Receive Buffer Size // Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. // To use flow control, set this buffer size to at least 1024 bytes. // :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 +#define RX_BUFFER_SIZE 2048 #if RX_BUFFER_SIZE >= 1024 // Enable to have the controller send XON/XOFF control characters to // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF + #define SERIAL_XON_XOFF #endif #if ENABLED(SDSUPPORT) @@ -2213,7 +2213,7 @@ //#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK +#define ADVANCED_OK // Printrun may have trouble receiving long strings all at once. // This option inserts short delays between lines of serial output. @@ -2247,21 +2247,21 @@ * * Note that M207 / M208 / M209 settings are saved to EEPROM. */ -//#define FWRETRACT +#define FWRETRACT #if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions + //#define FWRETRACT_AUTORETRACT // Override slicer retractions #if ENABLED(FWRETRACT_AUTORETRACT) #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length + #define MAX_AUTORETRACT 5.0 // (mm) Don't convert E moves over this length #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) + #define RETRACT_LENGTH 2 // (mm) Default retract length (positive value) #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting + #define RETRACT_FEEDRATE 35 // (mm/s) Default feedrate for retracting #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction + #define RETRACT_RECOVER_FEEDRATE 35 // (mm/s) Default feedrate for recovering from retraction + #define RETRACT_RECOVER_FEEDRATE_SWAP 35 // (mm/s) Default feedrate for recovering from swap retraction #if ENABLED(MIXING_EXTRUDER) //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously #endif @@ -2361,48 +2361,48 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_FEEDRATE 35 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 710 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 2 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 25 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 710 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 2 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. + #define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + #define FILAMENT_UNLOAD_PURGE_RETRACT 10 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_PURGE_DELAY 750 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 3 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2853,7 +2853,7 @@ * M912 - Clear stepper driver overtemperature pre-warn condition flag. * M122 - Report driver parameters (Requires TMC_DEBUG) */ - //#define MONITOR_DRIVER_STATUS + #define MONITOR_DRIVER_STATUS #if ENABLED(MONITOR_DRIVER_STATUS) #define CURRENT_STEP_DOWN 50 // [mA] @@ -2950,13 +2950,13 @@ * Beta feature! * Create a 50/50 square wave step pulse optimal for stepper drivers. */ - //#define SQUARE_WAVE_STEPPING + #define SQUARE_WAVE_STEPPING /** * Enable M122 debugging command for TMC stepper drivers. * M122 S0/1 will enable continuous reporting. */ - //#define TMC_DEBUG + #define TMC_DEBUG /** * You can set your own advanced settings by filling in predefined functions. @@ -3567,7 +3567,7 @@ /** * Auto-report position with M154 S */ -//#define AUTO_REPORT_POSITION +#define AUTO_REPORT_POSITION /** * Include capabilities in M115 output @@ -3587,7 +3587,7 @@ /** * Disable all Volumetric extrusion options */ -//#define NO_VOLUMETRICS +#define NO_VOLUMETRICS #if DISABLED(NO_VOLUMETRICS) /** @@ -3619,7 +3619,7 @@ * - M206 and M428 are disabled. * - G92 will revert to its behavior from Marlin 1.0. */ -//#define NO_WORKSPACE_OFFSETS +#define NO_WORKSPACE_OFFSETS // Extra options for the M114 "Current Position" report //#define M114_DETAIL // Use 'M114` for details to check planner calculations @@ -3809,7 +3809,7 @@ * * Implement M486 to allow Marlin to skip objects */ -//#define CANCEL_OBJECTS +#define CANCEL_OBJECTS #if ENABLED(CANCEL_OBJECTS) #define CANCEL_OBJECTS_REPORTING // Emit the current object as a status message #endif diff --git a/platformio.ini b/platformio.ini index db4d12ea7f..d4352a2379 100644 --- a/platformio.ini +++ b/platformio.ini @@ -13,7 +13,7 @@ [platformio] src_dir = Marlin boards_dir = buildroot/share/PlatformIO/boards -default_envs = mega2560 +default_envs = mks_robin_nano35 include_dir = Marlin extra_configs = ini/avr.ini