🐛 Followup to JyersUI

Marlin/src/MarlinCore.h

@@ -23,10 +23,6 @@
 
 #include "inc/MarlinConfig.h"
 
-#ifdef DEBUG_GCODE_PARSER
-  #include "gcode/parser.h"
-#endif
-
 #include <math.h>
 #include <stdio.h>
 #include <stdlib.h>

Marlin/src/gcode/gcode.h

@@ -21,10 +21,6 @@
  */
 #pragma once
 
-/**
- * gcode.h - Temporary container for all gcode handlers
- */
-
 /**
  * -----------------
  * G-Codes in Marlin

Marlin/src/lcd/e3v2/creality/rotary_encoder.cpp

@@ -145,7 +145,9 @@ ENCODER_DiffState Encoder_ReceiveAnalyze() {
           const float encoderStepRate = encoderMovementSteps / float(ms - EncoderRate.lastEncoderTime) * 1000;
                if (encoderStepRate >= ENCODER_100X_STEPS_PER_SEC) encoderMultiplier = 100;
           else if (encoderStepRate >= ENCODER_10X_STEPS_PER_SEC)  encoderMultiplier = 10;
-          else if (encoderStepRate >= ENCODER_5X_STEPS_PER_SEC)   encoderMultiplier = 5;
+          #if ENCODER_5X_STEPS_PER_SEC
+            else if (encoderStepRate >= ENCODER_5X_STEPS_PER_SEC) encoderMultiplier = 5;
+          #endif
         }
         EncoderRate.lastEncoderTime = ms;
       }

Marlin/src/lcd/e3v2/enhanced/rotary_encoder.cpp

@@ -145,7 +145,9 @@ ENCODER_DiffState Encoder_ReceiveAnalyze() {
           const float encoderStepRate = encoderMovementSteps / float(ms - EncoderRate.lastEncoderTime) * 1000;
                if (encoderStepRate >= ENCODER_100X_STEPS_PER_SEC) encoderMultiplier = 100;
           else if (encoderStepRate >= ENCODER_10X_STEPS_PER_SEC)  encoderMultiplier = 10;
-          else if (encoderStepRate >= ENCODER_5X_STEPS_PER_SEC)   encoderMultiplier = 5;
+          #if ENCODER_5X_STEPS_PER_SEC
+            else if (encoderStepRate >= ENCODER_5X_STEPS_PER_SEC) encoderMultiplier = 5;
+          #endif
         }
         EncoderRate.lastEncoderTime = ms;
       }

Marlin/src/lcd/e3v2/jyersui/dwin.cpp

@@ -33,6 +33,7 @@
 #include "../../marlinui.h"
 #include "../../../MarlinCore.h"
 
+#include "../../../gcode/gcode.h"
 #include "../../../module/temperature.h"
 #include "../../../module/planner.h"
 #include "../../../module/settings.h"
@@ -180,6 +181,7 @@ bool probe_deployed = false;
 CrealityDWINClass CrealityDWIN;
 
 #if HAS_MESH
+
   struct Mesh_Settings {
     bool viewer_asymmetric_range = false;
     bool viewer_print_value = false;
@@ -362,7 +364,7 @@ CrealityDWINClass CrealityDWIN;
       if (v_min > 3e+10F) v_min = 0.0000001;
       if (v_max > 3e+10F) v_max = 0.0000001;
       if (range > 3e+10F) range = 0.0000001;
-      char msg[32];
+      char msg[46];
       if (viewer_asymmetric_range) {
         dtostrf(-v_min, 1, 3, str_1);
         dtostrf( v_max, 1, 3, str_2);
@@ -378,7 +380,8 @@ CrealityDWINClass CrealityDWIN;
 
   };
   Mesh_Settings mesh_conf;
-#endif
+
+#endif // HAS_MESH
 
 /* General Display Functions */
 
@@ -4754,11 +4757,13 @@ void CrealityDWINClass::Start_Print(bool sd) {
     printing = true;
     statusmsg[0] = '\0';
     if (sd) {
-      if (recovery.valid()) {
-        SdFile *diveDir = nullptr;
-        const char * const fname = card.diveToFile(true, diveDir, recovery.info.sd_filename);
-        card.selectFileByName(fname);
-      }
+      #if ENABLED(POWER_LOSS_RECOVERY)
+        if (recovery.valid()) {
+          SdFile *diveDir = nullptr;
+          const char * const fname = card.diveToFile(true, diveDir, recovery.info.sd_filename);
+          card.selectFileByName(fname);
+        }
+      #endif
       strcpy_P(filename, card.longest_filename());
     }
     else
@@ -4798,7 +4803,7 @@ void MarlinUI::update() { CrealityDWIN.Update(); }
 
 void CrealityDWINClass::State_Update() {
   if ((print_job_timer.isRunning() || print_job_timer.isPaused()) != printing) {
-    if (!printing) Start_Print((card.isFileOpen() || recovery.valid()));
+    if (!printing) Start_Print(card.isFileOpen() || TERN0(POWER_LOSS_RECOVERY, recovery.valid()));
     else Stop_Print();
   }
   if (print_job_timer.isPaused() != paused) {

Marlin/src/lcd/e3v2/jyersui/rotary_encoder.cpp

@@ -145,7 +145,9 @@ ENCODER_DiffState Encoder_ReceiveAnalyze() {
           const float encoderStepRate = encoderMovementSteps / float(ms - EncoderRate.lastEncoderTime) * 1000;
                if (encoderStepRate >= ENCODER_100X_STEPS_PER_SEC) encoderMultiplier = 100;
           else if (encoderStepRate >= ENCODER_10X_STEPS_PER_SEC)  encoderMultiplier = 10;
-          else if (encoderStepRate >= ENCODER_5X_STEPS_PER_SEC)   encoderMultiplier = 5;
+          #if ENCODER_5X_STEPS_PER_SEC
+            else if (encoderStepRate >= ENCODER_5X_STEPS_PER_SEC) encoderMultiplier = 5;
+          #endif
         }
         EncoderRate.lastEncoderTime = ms;
       }

Marlin/src/lcd/marlinui.h

@@ -596,7 +596,7 @@ public:
     static inline bool use_click() { return false; }
   #endif
 
-  #if ENABLED(ADVANCED_PAUSE_FEATURE) && ANY(HAS_LCD_MENU, EXTENSIBLE_UI, HAS_DWIN_E3V2)
+  #if ENABLED(ADVANCED_PAUSE_FEATURE) && ANY(HAS_LCD_MENU, EXTENSIBLE_UI, DWIN_CREALITY_LCD_ENHANCED, DWIN_CREALITY_LCD_JYERSUI)
     static void pause_show_message(const PauseMessage message, const PauseMode mode=PAUSE_MODE_SAME, const uint8_t extruder=active_extruder);
   #else
     static inline void _pause_show_message() {}