From 8e0f3b7eba0bff68d58f3938d4c5a9dddee273db Mon Sep 17 00:00:00 2001 From: Tannoo Date: Wed, 28 Jun 2017 20:56:36 -0600 Subject: [PATCH 1/4] UBL radar map corrections --- Marlin/ubl_G29.cpp | 13 ++++--------- Marlin/ultralcd.cpp | 14 ++++++++++++-- 2 files changed, 16 insertions(+), 11 deletions(-) diff --git a/Marlin/ubl_G29.cpp b/Marlin/ubl_G29.cpp index f77f3746a0..84faa29dfe 100644 --- a/Marlin/ubl_G29.cpp +++ b/Marlin/ubl_G29.cpp @@ -45,9 +45,7 @@ void lcd_mesh_edit_setup(float initial); float lcd_mesh_edit(); void lcd_z_offset_edit_setup(float); - #if ENABLED(DOGLCD) - extern void _lcd_ubl_output_map_lcd(); - #endif + extern void _lcd_ubl_output_map_lcd(); float lcd_z_offset_edit(); #endif @@ -1522,7 +1520,7 @@ idle(); } while (!ubl_lcd_clicked()); - lcd_return_to_status(); + if (!ubl_lcd_map_control) lcd_return_to_status(); // The technique used here generates a race condition for the encoder click. // It could get detected in lcd_mesh_edit (actually _lcd_mesh_fine_tune) or here. @@ -1569,11 +1567,8 @@ LCD_MESSAGEPGM(MSG_UBL_DONE_EDITING_MESH); SERIAL_ECHOLNPGM("Done Editing Mesh"); - if (ubl_lcd_map_control) { - #if ENABLED(DOGLCD) - lcd_goto_screen(_lcd_ubl_output_map_lcd); - #endif - } + if (ubl_lcd_map_control) + lcd_goto_screen(_lcd_ubl_output_map_lcd); else lcd_return_to_status(); } diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index 2b45f81330..3cd0dac5dc 100644 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -547,6 +547,15 @@ uint16_t max_display_update_time = 0; void lcd_status_screen() { + #if DISABLED(DOGLCD) && ENABLED(AUTO_BED_LEVELING_UBL) + if(!ubl_lcd_map_control) + lcd_set_custom_characters( + #if ENABLED(LCD_PROGRESS_BAR) + const bool info_screen_charset = true + #endif + ); + #endif + #if ENABLED(ULTIPANEL) ENCODER_DIRECTION_NORMAL(); ENCODER_RATE_MULTIPLY(false); @@ -2158,8 +2167,6 @@ void kill_screen(const char* lcd_msg) { void _lcd_ubl_map_lcd_edit_cmd() { char ubl_lcd_gcode [50], str[10], str2[10]; - ubl_lcd_map_control = true; // Used for returning to the map screen - dtostrf(pgm_read_float(&ubl._mesh_index_to_xpos[x_plot]), 0, 2, str); dtostrf(pgm_read_float(&ubl._mesh_index_to_ypos[y_plot]), 0, 2, str2); snprintf_P(ubl_lcd_gcode, sizeof(ubl_lcd_gcode), PSTR("G29 P4 X%s Y%s R%i"), str, str2, n_edit_pts); @@ -2253,6 +2260,7 @@ void kill_screen(const char* lcd_msg) { * UBL Homing before LCD map */ void _lcd_ubl_output_map_lcd_cmd() { + ubl_lcd_map_control = true; // Used for returning to the map screen if (!(axis_known_position[X_AXIS] && axis_known_position[Y_AXIS] && axis_known_position[Z_AXIS])) enqueue_and_echo_commands_P(PSTR("G28")); lcd_goto_screen(_lcd_ubl_map_homing); @@ -2393,6 +2401,8 @@ void kill_screen(const char* lcd_msg) { if (!g29_in_progress) #endif MENU_ITEM(submenu, MSG_BED_LEVELING, lcd_bed_leveling); + #elif PLANNER_LEVELING + MENU_ITEM(gcode, MSG_BED_LEVELING, PSTR("G28\nG29")); #endif #if HAS_M206_COMMAND From f17bae1f703356005b997422e32f5ac231659193 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sat, 1 Jul 2017 18:33:54 -0500 Subject: [PATCH 2/4] Changes for ubl_lcd_map_control patch --- Marlin/Marlin_main.cpp | 12 ++++-------- Marlin/ubl_G29.cpp | 4 ++-- Marlin/ultralcd.cpp | 22 ++++++++++------------ Marlin/ultralcd.h | 1 + 4 files changed, 17 insertions(+), 22 deletions(-) diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 2ed85a398d..98fb0e60b0 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -333,7 +333,6 @@ #if ENABLED(AUTO_BED_LEVELING_UBL) #include "ubl.h" extern bool defer_return_to_status; - extern bool ubl_lcd_map_control; unified_bed_leveling ubl; #define UBL_MESH_VALID !( ( ubl.z_values[0][0] == ubl.z_values[0][1] && ubl.z_values[0][1] == ubl.z_values[0][2] \ && ubl.z_values[1][0] == ubl.z_values[1][1] && ubl.z_values[1][1] == ubl.z_values[1][2] \ @@ -7742,11 +7741,9 @@ inline void gcode_M18_M84() { #endif } - #if ENABLED(AUTO_BED_LEVELING_UBL) && ENABLED(ULTRA_LCD) //only needed if have an LCD - ubl_lcd_map_control = false; - defer_return_to_status = false; + #if ENABLED(AUTO_BED_LEVELING_UBL) && ENABLED(ULTRA_LCD) // Only needed with an LCD + ubl_lcd_map_control = defer_return_to_status = false; #endif - } } @@ -12637,9 +12634,8 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) { #if ENABLED(DISABLE_INACTIVE_E) disable_e_steppers(); #endif - #if ENABLED(AUTO_BED_LEVELING_UBL) && ENABLED(ULTRA_LCD) //only needed if have an LCD - ubl_lcd_map_control = false; - defer_return_to_status = false; + #if ENABLED(AUTO_BED_LEVELING_UBL) && ENABLED(ULTRA_LCD) // Only needed with an LCD + ubl_lcd_map_control = defer_return_to_status = false; #endif } diff --git a/Marlin/ubl_G29.cpp b/Marlin/ubl_G29.cpp index 84faa29dfe..e0b27cb9c0 100644 --- a/Marlin/ubl_G29.cpp +++ b/Marlin/ubl_G29.cpp @@ -54,7 +54,6 @@ extern float probe_pt(const float &x, const float &y, bool, int); extern bool set_probe_deployed(bool); extern void set_bed_leveling_enabled(bool); - extern bool ubl_lcd_map_control; typedef void (*screenFunc_t)(); extern void lcd_goto_screen(screenFunc_t screen, const uint32_t encoder = 0); @@ -1569,7 +1568,8 @@ if (ubl_lcd_map_control) lcd_goto_screen(_lcd_ubl_output_map_lcd); - else lcd_return_to_status(); + else + lcd_return_to_status(); } #endif // NEWPANEL diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index 3cd0dac5dc..c9168db977 100644 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -470,8 +470,14 @@ uint16_t max_display_update_time = 0; screen_history_depth = 0; } lcd_implementation_clear(); - #if ENABLED(LCD_PROGRESS_BAR) - // For LCD_PROGRESS_BAR re-initialize custom characters + // Re-initialize custom characters that may be re-used + #if DISABLED(DOGLCD) && ENABLED(AUTO_BED_LEVELING_UBL) + if (!ubl_lcd_map_control) lcd_set_custom_characters( + #if ENABLED(LCD_PROGRESS_BAR) + screen == lcd_status_screen + #endif + ); + #elif ENABLED(LCD_PROGRESS_BAR) lcd_set_custom_characters(screen == lcd_status_screen); #endif lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT; @@ -547,15 +553,6 @@ uint16_t max_display_update_time = 0; void lcd_status_screen() { - #if DISABLED(DOGLCD) && ENABLED(AUTO_BED_LEVELING_UBL) - if(!ubl_lcd_map_control) - lcd_set_custom_characters( - #if ENABLED(LCD_PROGRESS_BAR) - const bool info_screen_charset = true - #endif - ); - #endif - #if ENABLED(ULTIPANEL) ENCODER_DIRECTION_NORMAL(); ENCODER_RATE_MULTIPLY(false); @@ -2151,6 +2148,7 @@ void kill_screen(const char* lcd_msg) { void _lcd_ubl_output_map_lcd(); void _lcd_ubl_map_homing() { + defer_return_to_status = true; if (lcdDrawUpdate) lcd_implementation_drawedit(PSTR(MSG_LEVEL_BED_HOMING), NULL); lcdDrawUpdate = LCDVIEW_CALL_NO_REDRAW; if (axis_homed[X_AXIS] && axis_homed[Y_AXIS] && axis_homed[Z_AXIS]) { @@ -2260,7 +2258,7 @@ void kill_screen(const char* lcd_msg) { * UBL Homing before LCD map */ void _lcd_ubl_output_map_lcd_cmd() { - ubl_lcd_map_control = true; // Used for returning to the map screen + ubl_lcd_map_control = true; // Return to the map screen (and don't restore the character set) if (!(axis_known_position[X_AXIS] && axis_known_position[Y_AXIS] && axis_known_position[Z_AXIS])) enqueue_and_echo_commands_P(PSTR("G28")); lcd_goto_screen(_lcd_ubl_map_homing); diff --git a/Marlin/ultralcd.h b/Marlin/ultralcd.h index 2fb719bb8c..909c13d408 100644 --- a/Marlin/ultralcd.h +++ b/Marlin/ultralcd.h @@ -188,6 +188,7 @@ void lcd_reset_status(); #if ENABLED(AUTO_BED_LEVELING_UBL) + extern bool ubl_lcd_map_control; void lcd_mesh_edit_setup(float initial); float lcd_mesh_edit(); void lcd_z_offset_edit_setup(float); From abd6ba62b4a13f24bbdbfc2a358b43b43d3f50d4 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sat, 1 Jul 2017 18:34:52 -0500 Subject: [PATCH 3/4] Some cleanups for ubl lcd mesh map --- Marlin/Conditionals_LCD.h | 6 ++++++ Marlin/ultralcd.cpp | 29 +++++++---------------------- Marlin/ultralcd_impl_HD44780.h | 8 ++++---- 3 files changed, 17 insertions(+), 26 deletions(-) diff --git a/Marlin/Conditionals_LCD.h b/Marlin/Conditionals_LCD.h index 791a41d28c..7aa96deae4 100644 --- a/Marlin/Conditionals_LCD.h +++ b/Marlin/Conditionals_LCD.h @@ -273,6 +273,12 @@ #define LCD_FEEDRATE_CHAR 0x06 #define LCD_CLOCK_CHAR 0x07 #define LCD_STR_ARROW_RIGHT ">" /* from the default character set */ + + #if ENABLED(AUTO_BED_LEVELING_UBL) + #define LCD_UBL_BOXTOP_CHAR 0x01 + #define LCD_UBL_BOXBOT_CHAR 0x02 + #endif + #endif /** diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index c9168db977..d58b2dc37e 100644 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -2188,28 +2188,24 @@ void kill_screen(const char* lcd_msg) { void _lcd_ubl_output_map_lcd() { static int16_t step_scaler = 0; - int32_t signed_enc_pos; - defer_return_to_status = true; - - if (axis_known_position[X_AXIS] && axis_known_position[Y_AXIS] && axis_known_position[Z_AXIS]) { + if (!(axis_known_position[X_AXIS] && axis_known_position[Y_AXIS] && axis_known_position[Z_AXIS])) + return lcd_goto_screen(_lcd_ubl_map_homing); - if (lcd_clicked) { return _lcd_ubl_map_lcd_edit_cmd(); } + if (lcd_clicked) return _lcd_ubl_map_lcd_edit_cmd(); ENCODER_DIRECTION_NORMAL(); if (encoderPosition) { - signed_enc_pos = (int32_t)encoderPosition; - step_scaler += signed_enc_pos; + step_scaler += (int32_t)encoderPosition; x_plot += step_scaler / (ENCODER_STEPS_PER_MENU_ITEM); if (abs(step_scaler) >= ENCODER_STEPS_PER_MENU_ITEM) step_scaler = 0; refresh_cmd_timeout(); + encoderPosition = 0; lcdDrawUpdate = LCDVIEW_REDRAW_NOW; } - encoderPosition = 0; - // Encoder to the right (++) if (x_plot >= GRID_MAX_POINTS_X) { x_plot = 0; y_plot++; } if (y_plot >= GRID_MAX_POINTS_Y) y_plot = 0; @@ -2236,22 +2232,11 @@ void kill_screen(const char* lcd_msg) { ubl_map_move_to_xy(); // Move to current location - if (planner.movesplanned() > 1) { // if the nozzle is moving, cancel the move. There is a new location - #define ENABLE_STEPPER_DRIVER_INTERRUPT() SBI(TIMSK1, OCIE1A) - #define DISABLE_STEPPER_DRIVER_INTERRUPT() CBI(TIMSK1, OCIE1A) - DISABLE_STEPPER_DRIVER_INTERRUPT(); - while (planner.blocks_queued()) planner.discard_current_block(); - stepper.current_block = NULL; - planner.clear_block_buffer_runtime(); - ENABLE_STEPPER_DRIVER_INTERRUPT(); - set_current_from_steppers_for_axis(ALL_AXES); - sync_plan_position(); + if (planner.movesplanned() > 1) { // if the nozzle is moving, cancel the move. There is a new location + quickstop_stepper(); ubl_map_move_to_xy(); // Move to new location } } - safe_delay(10); - } - else lcd_goto_screen(_lcd_ubl_map_homing); } /** diff --git a/Marlin/ultralcd_impl_HD44780.h b/Marlin/ultralcd_impl_HD44780.h index 2824ed0882..24280f7889 100644 --- a/Marlin/ultralcd_impl_HD44780.h +++ b/Marlin/ultralcd_impl_HD44780.h @@ -1134,8 +1134,8 @@ static void lcd_implementation_status_screen() { B00000, B11111 }; - createChar_P(1, _lcd_box_top); - createChar_P(2, _lcd_box_bottom); + createChar_P(LCD_UBL_BOXTOP_CHAR, _lcd_box_top); + createChar_P(LCD_UBL_BOXBOT_CHAR, _lcd_box_bottom); #endif } @@ -1178,8 +1178,8 @@ static void lcd_implementation_status_screen() { * Draw the Mesh Map Box */ uint8_t m; - lcd.setCursor(_MAP_X, 0); for (m = 0; m < 5; m++) lcd.write(1); // Top - lcd.setCursor(_MAP_X, 3); for (m = 0; m < 5; m++) lcd.write(2); // Bottom + lcd.setCursor(_MAP_X, 0); for (m = 0; m < 5; m++) lcd.write(LCD_UBL_BOXTOP_CHAR); // Top + lcd.setCursor(_MAP_X, 3); for (m = 0; m < 5; m++) lcd.write(LCD_UBL_BOXBOT_CHAR); // Bottom for (m = 0; m <= 3; m++) { lcd.setCursor(2, m); lcd.write('|'); // Left lcd.setCursor(8, m); lcd.write('|'); // Right From 4cb45c10dd51150d932db9b33f75cdcf21fbd23a Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sat, 1 Jul 2017 18:37:33 -0500 Subject: [PATCH 4/4] Patch ubl lcd mesh map indentation --- Marlin/ultralcd.cpp | 70 ++++----- Marlin/ultralcd_impl_HD44780.h | 260 ++++++++++++++++----------------- 2 files changed, 165 insertions(+), 165 deletions(-) diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index d58b2dc37e..7803a72c4a 100644 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -2192,51 +2192,51 @@ void kill_screen(const char* lcd_msg) { if (!(axis_known_position[X_AXIS] && axis_known_position[Y_AXIS] && axis_known_position[Z_AXIS])) return lcd_goto_screen(_lcd_ubl_map_homing); - if (lcd_clicked) return _lcd_ubl_map_lcd_edit_cmd(); - ENCODER_DIRECTION_NORMAL(); + if (lcd_clicked) return _lcd_ubl_map_lcd_edit_cmd(); + ENCODER_DIRECTION_NORMAL(); - if (encoderPosition) { - step_scaler += (int32_t)encoderPosition; - x_plot += step_scaler / (ENCODER_STEPS_PER_MENU_ITEM); - if (abs(step_scaler) >= ENCODER_STEPS_PER_MENU_ITEM) - step_scaler = 0; - refresh_cmd_timeout(); + if (encoderPosition) { + step_scaler += (int32_t)encoderPosition; + x_plot += step_scaler / (ENCODER_STEPS_PER_MENU_ITEM); + if (abs(step_scaler) >= ENCODER_STEPS_PER_MENU_ITEM) + step_scaler = 0; + refresh_cmd_timeout(); - encoderPosition = 0; - lcdDrawUpdate = LCDVIEW_REDRAW_NOW; - } + encoderPosition = 0; + lcdDrawUpdate = LCDVIEW_REDRAW_NOW; + } - // Encoder to the right (++) - if (x_plot >= GRID_MAX_POINTS_X) { x_plot = 0; y_plot++; } - if (y_plot >= GRID_MAX_POINTS_Y) y_plot = 0; + // Encoder to the right (++) + if (x_plot >= GRID_MAX_POINTS_X) { x_plot = 0; y_plot++; } + if (y_plot >= GRID_MAX_POINTS_Y) y_plot = 0; - // Encoder to the left (--) - if (x_plot <= GRID_MAX_POINTS_X - (GRID_MAX_POINTS_X + 1)) { x_plot = GRID_MAX_POINTS_X - 1; y_plot--; } - if (y_plot <= GRID_MAX_POINTS_Y - (GRID_MAX_POINTS_Y + 1)) y_plot = GRID_MAX_POINTS_Y - 1; + // Encoder to the left (--) + if (x_plot <= GRID_MAX_POINTS_X - (GRID_MAX_POINTS_X + 1)) { x_plot = GRID_MAX_POINTS_X - 1; y_plot--; } + if (y_plot <= GRID_MAX_POINTS_Y - (GRID_MAX_POINTS_Y + 1)) y_plot = GRID_MAX_POINTS_Y - 1; - // Prevent underrun/overrun of plot numbers - x_plot = constrain(x_plot, GRID_MAX_POINTS_X - (GRID_MAX_POINTS_X + 1), GRID_MAX_POINTS_X + 1); - y_plot = constrain(y_plot, GRID_MAX_POINTS_Y - (GRID_MAX_POINTS_Y + 1), GRID_MAX_POINTS_Y + 1); + // Prevent underrun/overrun of plot numbers + x_plot = constrain(x_plot, GRID_MAX_POINTS_X - (GRID_MAX_POINTS_X + 1), GRID_MAX_POINTS_X + 1); + y_plot = constrain(y_plot, GRID_MAX_POINTS_Y - (GRID_MAX_POINTS_Y + 1), GRID_MAX_POINTS_Y + 1); - // Determine number of points to edit - #if IS_KINEMATIC - n_edit_pts = 9; //TODO: Delta accessible edit points - #else - const bool xc = WITHIN(x_plot, 1, GRID_MAX_POINTS_X - 2), - yc = WITHIN(y_plot, 1, GRID_MAX_POINTS_Y - 2); - n_edit_pts = yc ? (xc ? 9 : 6) : (xc ? 6 : 4); // Corners - #endif + // Determine number of points to edit + #if IS_KINEMATIC + n_edit_pts = 9; //TODO: Delta accessible edit points + #else + const bool xc = WITHIN(x_plot, 1, GRID_MAX_POINTS_X - 2), + yc = WITHIN(y_plot, 1, GRID_MAX_POINTS_Y - 2); + n_edit_pts = yc ? (xc ? 9 : 6) : (xc ? 6 : 4); // Corners + #endif - if (lcdDrawUpdate) { - lcd_implementation_ubl_plot(x_plot, y_plot); + if (lcdDrawUpdate) { + lcd_implementation_ubl_plot(x_plot, y_plot); - ubl_map_move_to_xy(); // Move to current location + ubl_map_move_to_xy(); // Move to current location - if (planner.movesplanned() > 1) { // if the nozzle is moving, cancel the move. There is a new location - quickstop_stepper(); - ubl_map_move_to_xy(); // Move to new location - } + if (planner.movesplanned() > 1) { // if the nozzle is moving, cancel the move. There is a new location + quickstop_stepper(); + ubl_map_move_to_xy(); // Move to new location } + } } /** diff --git a/Marlin/ultralcd_impl_HD44780.h b/Marlin/ultralcd_impl_HD44780.h index 24280f7889..40187f79a8 100644 --- a/Marlin/ultralcd_impl_HD44780.h +++ b/Marlin/ultralcd_impl_HD44780.h @@ -1085,151 +1085,151 @@ static void lcd_implementation_status_screen() { #if ENABLED(AUTO_BED_LEVELING_UBL) - /* - * These are just basic data for the 20x4 LCD work that - * is coming up very soon. - * Soon this will morph into a map code. - */ + /* + * These are just basic data for the 20x4 LCD work that + * is coming up very soon. + * Soon this will morph into a map code. + */ + + /** + Possible map screens: + + 16x2 |X000.00 Y000.00| + |(00,00) Z00.000| + + 20x2 | X:000.00 Y:000.00 | + | (00,00) Z:00.000 | + + 16x4 |+-------+(00,00)| + || |X000.00| + || |Y000.00| + |+-------+Z00.000| + + 20x4 | +-------+ (00,00) | + | | | X:000.00| + | | | Y:000.00| + | +-------+ Z:00.000| + */ + + void lcd_set_ubl_map_plot_chars() { + #if LCD_HEIGHT > 3 + //#include "_ubl_lcd_map_characters.h" + const static byte _lcd_box_top[8] PROGMEM = { + B11111, + B00000, + B00000, + B00000, + B00000, + B00000, + B00000, + B00000 + }; + const static byte _lcd_box_bottom[8] PROGMEM = { + B00000, + B00000, + B00000, + B00000, + B00000, + B00000, + B00000, + B11111 + }; + createChar_P(LCD_UBL_BOXTOP_CHAR, _lcd_box_top); + createChar_P(LCD_UBL_BOXBOT_CHAR, _lcd_box_bottom); + #endif + } - /** - Possible map screens: - - 16x2 |X000.00 Y000.00| - |(00,00) Z00.000| - - 20x2 | X:000.00 Y:000.00 | - | (00,00) Z:00.000 | - - 16x4 |+-------+(00,00)| - || |X000.00| - || |Y000.00| - |+-------+Z00.000| - - 20x4 | +-------+ (00,00) | - | | | X:000.00| - | | | Y:000.00| - | +-------+ Z:00.000| - */ - - void lcd_set_ubl_map_plot_chars() { - #if LCD_HEIGHT > 3 - //#include "_ubl_lcd_map_characters.h" - const static byte _lcd_box_top[8] PROGMEM = { - B11111, - B00000, - B00000, - B00000, - B00000, - B00000, - B00000, - B00000 - }; - const static byte _lcd_box_bottom[8] PROGMEM = { - B00000, - B00000, - B00000, - B00000, - B00000, - B00000, - B00000, - B11111 - }; - createChar_P(LCD_UBL_BOXTOP_CHAR, _lcd_box_top); - createChar_P(LCD_UBL_BOXBOT_CHAR, _lcd_box_bottom); - #endif - } + void lcd_implementation_ubl_plot(const uint8_t x_plot, const uint8_t y_plot) { - void lcd_implementation_ubl_plot(const uint8_t x_plot, const uint8_t y_plot) { + #if LCD_WIDTH >= 20 + #define _LCD_W_POS 12 + #define _PLOT_X 1 + #define _MAP_X 3 + #define _LABEL(C,X,Y) lcd.setCursor(X, Y); lcd.print(C) + #define _XLABEL(X,Y) _LABEL("X:",X,Y) + #define _YLABEL(X,Y) _LABEL("Y:",X,Y) + #define _ZLABEL(X,Y) _LABEL("Z:",X,Y) + #else + #define _LCD_W_POS 8 + #define _PLOT_X 0 + #define _MAP_X 1 + #define _LABEL(X,Y,C) lcd.setCursor(X, Y); lcd.write(C) + #define _XLABEL(X,Y) _LABEL('X',X,Y) + #define _YLABEL(X,Y) _LABEL('Y',X,Y) + #define _ZLABEL(X,Y) _LABEL('Z',X,Y) + #endif - #if LCD_WIDTH >= 20 - #define _LCD_W_POS 12 - #define _PLOT_X 1 - #define _MAP_X 3 - #define _LABEL(C,X,Y) lcd.setCursor(X, Y); lcd.print(C) - #define _XLABEL(X,Y) _LABEL("X:",X,Y) - #define _YLABEL(X,Y) _LABEL("Y:",X,Y) - #define _ZLABEL(X,Y) _LABEL("Z:",X,Y) - #else - #define _LCD_W_POS 8 - #define _PLOT_X 0 - #define _MAP_X 1 - #define _LABEL(X,Y,C) lcd.setCursor(X, Y); lcd.write(C) - #define _XLABEL(X,Y) _LABEL('X',X,Y) - #define _YLABEL(X,Y) _LABEL('Y',X,Y) - #define _ZLABEL(X,Y) _LABEL('Z',X,Y) - #endif + #if LCD_HEIGHT <= 3 // 16x2 or 20x2 display - #if LCD_HEIGHT <= 3 // 16x2 or 20x2 display + /** + * Show X and Y positions + */ + _XLABEL(_PLOT_X, 0); + lcd.print(ftostr32(LOGICAL_X_POSITION(pgm_read_float(&ubl._mesh_index_to_xpos[x_plot])))); - /** - * Show X and Y positions - */ - _XLABEL(_PLOT_X, 0); - lcd.print(ftostr32(LOGICAL_X_POSITION(pgm_read_float(&ubl._mesh_index_to_xpos[x_plot])))); + _YLABEL(_LCD_W_POS, 0); + lcd.print(ftostr32(LOGICAL_Y_POSITION(pgm_read_float(&ubl._mesh_index_to_ypos[y_plot])))); - _YLABEL(_LCD_W_POS, 0); - lcd.print(ftostr32(LOGICAL_Y_POSITION(pgm_read_float(&ubl._mesh_index_to_ypos[y_plot])))); + lcd.setCursor(_PLOT_X, 0); - lcd.setCursor(_PLOT_X, 0); + #else // 16x4 or 20x4 display - #else // 16x4 or 20x4 display + /** + * Draw the Mesh Map Box + */ + uint8_t m; + lcd.setCursor(_MAP_X, 0); for (m = 0; m < 5; m++) lcd.write(LCD_UBL_BOXTOP_CHAR); // Top + lcd.setCursor(_MAP_X, 3); for (m = 0; m < 5; m++) lcd.write(LCD_UBL_BOXBOT_CHAR); // Bottom + for (m = 0; m <= 3; m++) { + lcd.setCursor(2, m); lcd.write('|'); // Left + lcd.setCursor(8, m); lcd.write('|'); // Right + } - /** - * Draw the Mesh Map Box - */ - uint8_t m; - lcd.setCursor(_MAP_X, 0); for (m = 0; m < 5; m++) lcd.write(LCD_UBL_BOXTOP_CHAR); // Top - lcd.setCursor(_MAP_X, 3); for (m = 0; m < 5; m++) lcd.write(LCD_UBL_BOXBOT_CHAR); // Bottom - for (m = 0; m <= 3; m++) { - lcd.setCursor(2, m); lcd.write('|'); // Left - lcd.setCursor(8, m); lcd.write('|'); // Right - } + lcd.setCursor(_LCD_W_POS, 0); - lcd.setCursor(_LCD_W_POS, 0); + #endif - #endif + /** + * Print plot position + */ + lcd.write('('); + lcd.print(x_plot); + lcd.write(','); + lcd.print(y_plot); + lcd.write(')'); + + #if LCD_HEIGHT <= 3 // 16x2 or 20x2 display /** - * Print plot position + * Print Z values */ - lcd.write('('); - lcd.print(x_plot); - lcd.write(','); - lcd.print(y_plot); - lcd.write(')'); - - #if LCD_HEIGHT <= 3 // 16x2 or 20x2 display - - /** - * Print Z values - */ - _ZLABEL(_LCD_W_POS, 1); - if (!isnan(ubl.z_values[x_plot][y_plot])) - lcd.print(ftostr43sign(ubl.z_values[x_plot][y_plot])); - else - lcd_printPGM(PSTR(" -----")); - - #else // 16x4 or 20x4 display - - /** - * Show all values at right of screen - */ - _XLABEL(_LCD_W_POS, 1); - lcd.print(ftostr32(LOGICAL_X_POSITION(pgm_read_float(&ubl._mesh_index_to_xpos[x_plot])))); - _YLABEL(_LCD_W_POS, 2); - lcd.print(ftostr32(LOGICAL_Y_POSITION(pgm_read_float(&ubl._mesh_index_to_ypos[y_plot])))); - - /** - * Show the location value - */ - _ZLABEL(_LCD_W_POS, 3); - if (!isnan(ubl.z_values[x_plot][y_plot])) - lcd.print(ftostr43sign(ubl.z_values[x_plot][y_plot])); - else - lcd_printPGM(PSTR(" -----")); + _ZLABEL(_LCD_W_POS, 1); + if (!isnan(ubl.z_values[x_plot][y_plot])) + lcd.print(ftostr43sign(ubl.z_values[x_plot][y_plot])); + else + lcd_printPGM(PSTR(" -----")); - #endif // LCD_HEIGHT > 3 - } + #else // 16x4 or 20x4 display + + /** + * Show all values at right of screen + */ + _XLABEL(_LCD_W_POS, 1); + lcd.print(ftostr32(LOGICAL_X_POSITION(pgm_read_float(&ubl._mesh_index_to_xpos[x_plot])))); + _YLABEL(_LCD_W_POS, 2); + lcd.print(ftostr32(LOGICAL_Y_POSITION(pgm_read_float(&ubl._mesh_index_to_ypos[y_plot])))); + + /** + * Show the location value + */ + _ZLABEL(_LCD_W_POS, 3); + if (!isnan(ubl.z_values[x_plot][y_plot])) + lcd.print(ftostr43sign(ubl.z_values[x_plot][y_plot])); + else + lcd_printPGM(PSTR(" -----")); + + #endif // LCD_HEIGHT > 3 + } #endif // AUTO_BED_LEVELING_UBL