Browse Source

Merge pull request #3568 from thinkyhead/rc_various_fixes

General code cleanup, improved naming, etc.
pull/1/head
Scott Lahteine 9 years ago
parent
commit
3db5a75f30
  1. 11
      Marlin/Marlin.h
  2. 158
      Marlin/Marlin_main.cpp
  3. 8
      Marlin/planner.cpp
  4. 8
      Marlin/temperature.cpp
  5. 10
      Marlin/ultralcd.cpp

11
Marlin/Marlin.h

@ -223,10 +223,9 @@ void ok_to_send();
void reset_bed_level(); void reset_bed_level();
void prepare_move(); void prepare_move();
void kill(const char*); void kill(const char*);
void Stop();
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)
void filrunout(); void handle_filament_runout();
#endif #endif
/** /**
@ -275,8 +274,8 @@ extern float filament_size[EXTRUDERS]; // cross-sectional area of filament (in m
extern float volumetric_multiplier[EXTRUDERS]; // reciprocal of cross-sectional area of filament (in square millimeters), stored this way to reduce computational burden in planner extern float volumetric_multiplier[EXTRUDERS]; // reciprocal of cross-sectional area of filament (in square millimeters), stored this way to reduce computational burden in planner
extern float current_position[NUM_AXIS]; extern float current_position[NUM_AXIS];
extern float home_offset[3]; // axis[n].home_offset extern float home_offset[3]; // axis[n].home_offset
extern float min_pos[3]; // axis[n].min_pos extern float sw_endstop_min[3]; // axis[n].sw_endstop_min
extern float max_pos[3]; // axis[n].max_pos extern float sw_endstop_max[3]; // axis[n].sw_endstop_max
extern bool axis_known_position[3]; // axis[n].is_known extern bool axis_known_position[3]; // axis[n].is_known
extern bool axis_homed[3]; // axis[n].is_homed extern bool axis_homed[3]; // axis[n].is_homed
@ -340,8 +339,8 @@ extern bool axis_homed[3]; // axis[n].is_homed
#endif #endif
#if ENABLED(BARICUDA) #if ENABLED(BARICUDA)
extern int ValvePressure; extern int baricuda_valve_pressure;
extern int EtoPPressure; extern int baricuda_e_to_p_pressure;
#endif #endif
#if ENABLED(FILAMENT_WIDTH_SENSOR) #if ENABLED(FILAMENT_WIDTH_SENSOR)

158
Marlin/Marlin_main.cpp

@ -284,32 +284,51 @@ bool volumetric_enabled = false;
float filament_size[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(DEFAULT_NOMINAL_FILAMENT_DIA); float filament_size[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(DEFAULT_NOMINAL_FILAMENT_DIA);
float volumetric_multiplier[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(1.0); float volumetric_multiplier[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(1.0);
// The distance that XYZ has been offset by G92. Reset by G28.
float position_shift[3] = { 0 }; float position_shift[3] = { 0 };
// This offset is added to the configured home position.
// Set by M206, M428, or menu item. Saved to EEPROM.
float home_offset[3] = { 0 }; float home_offset[3] = { 0 };
float min_pos[3] = { X_MIN_POS, Y_MIN_POS, Z_MIN_POS };
float max_pos[3] = { X_MAX_POS, Y_MAX_POS, Z_MAX_POS }; // Software Endstops. Default to configured limits.
float sw_endstop_min[3] = { X_MIN_POS, Y_MIN_POS, Z_MIN_POS };
float sw_endstop_max[3] = { X_MAX_POS, Y_MAX_POS, Z_MAX_POS };
#if FAN_COUNT > 0 #if FAN_COUNT > 0
int fanSpeeds[FAN_COUNT] = { 0 }; int fanSpeeds[FAN_COUNT] = { 0 };
#endif #endif
// The active extruder (tool). Set with T<extruder> command.
uint8_t active_extruder = 0; uint8_t active_extruder = 0;
// Relative Mode. Enable with G91, disable with G90.
static bool relative_mode = false;
bool cancel_heatup = false; bool cancel_heatup = false;
const char errormagic[] PROGMEM = "Error:"; const char errormagic[] PROGMEM = "Error:";
const char echomagic[] PROGMEM = "echo:"; const char echomagic[] PROGMEM = "echo:";
const char axis_codes[NUM_AXIS] = {'X', 'Y', 'Z', 'E'}; const char axis_codes[NUM_AXIS] = {'X', 'Y', 'Z', 'E'};
static bool relative_mode = false; //Determines Absolute or Relative Coordinates
static int serial_count = 0; static int serial_count = 0;
static char* seen_pointer; ///< A pointer to find chars in the command string (X, Y, Z, E, etc.)
const char* queued_commands_P = NULL; /* pointer to the current line in the active sequence of commands, or NULL when none */ // GCode parameter pointer used by code_seen(), code_value(), etc.
static char* seen_pointer;
// Next Immediate GCode Command pointer. NULL if none.
const char* queued_commands_P = NULL;
const int sensitive_pins[] = SENSITIVE_PINS; ///< Sensitive pin list for M42 const int sensitive_pins[] = SENSITIVE_PINS; ///< Sensitive pin list for M42
// Inactivity shutdown // Inactivity shutdown
millis_t previous_cmd_ms = 0; millis_t previous_cmd_ms = 0;
static millis_t max_inactive_time = 0; static millis_t max_inactive_time = 0;
static millis_t stepper_inactive_time = (DEFAULT_STEPPER_DEACTIVE_TIME) * 1000UL; static millis_t stepper_inactive_time = (DEFAULT_STEPPER_DEACTIVE_TIME) * 1000UL;
// Print Job Timer
Stopwatch print_job_timer = Stopwatch(); Stopwatch print_job_timer = Stopwatch();
static uint8_t target_extruder; static uint8_t target_extruder;
#if ENABLED(AUTO_BED_LEVELING_FEATURE) #if ENABLED(AUTO_BED_LEVELING_FEATURE)
@ -344,8 +363,8 @@ static uint8_t target_extruder;
#endif #endif
#if ENABLED(BARICUDA) #if ENABLED(BARICUDA)
int ValvePressure = 0; int baricuda_valve_pressure = 0;
int EtoPPressure = 0; int baricuda_e_to_p_pressure = 0;
#endif #endif
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
@ -427,7 +446,7 @@ static uint8_t target_extruder;
#endif #endif
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)
static bool filrunoutEnqueued = false; static bool filament_ran_out = false;
#endif #endif
static bool send_ok[BUFSIZE]; static bool send_ok[BUFSIZE];
@ -472,13 +491,13 @@ static bool send_ok[BUFSIZE];
* *************************************************************************** * ***************************************************************************
*/ */
void stop();
void get_available_commands(); void get_available_commands();
void process_next_command(); void process_next_command();
void plan_arc(float target[NUM_AXIS], float* offset, uint8_t clockwise); void plan_arc(float target[NUM_AXIS], float* offset, uint8_t clockwise);
bool setTargetedHotend(int code);
void serial_echopair_P(const char* s_P, int v) { serialprintPGM(s_P); SERIAL_ECHO(v); } void serial_echopair_P(const char* s_P, int v) { serialprintPGM(s_P); SERIAL_ECHO(v); }
void serial_echopair_P(const char* s_P, long v) { serialprintPGM(s_P); SERIAL_ECHO(v); } void serial_echopair_P(const char* s_P, long v) { serialprintPGM(s_P); SERIAL_ECHO(v); }
void serial_echopair_P(const char* s_P, float v) { serialprintPGM(s_P); SERIAL_ECHO(v); } void serial_echopair_P(const char* s_P, float v) { serialprintPGM(s_P); SERIAL_ECHO(v); }
@ -1142,6 +1161,30 @@ bool code_seen(char code) {
return (seen_pointer != NULL); // Return TRUE if the code-letter was found return (seen_pointer != NULL); // Return TRUE if the code-letter was found
} }
/**
* Set target_extruder from the T parameter or the active_extruder
*
* Returns TRUE if the target is invalid
*/
bool get_target_extruder_from_command(int code) {
if (code_seen('T')) {
short t = code_value_short();
if (t >= EXTRUDERS) {
SERIAL_ECHO_START;
SERIAL_CHAR('M');
SERIAL_ECHO(code);
SERIAL_ECHOPAIR(" " MSG_INVALID_EXTRUDER " ", t);
SERIAL_EOL;
return true;
}
target_extruder = t;
}
else
target_extruder = active_extruder;
return false;
}
#define DEFINE_PGM_READ_ANY(type, reader) \ #define DEFINE_PGM_READ_ANY(type, reader) \
static inline type pgm_read_any(const type *p) \ static inline type pgm_read_any(const type *p) \
{ return pgm_read_##reader##_near(p); } { return pgm_read_##reader##_near(p); }
@ -1212,24 +1255,32 @@ static void update_software_endstops(AxisEnum axis) {
if (axis == X_AXIS) { if (axis == X_AXIS) {
float dual_max_x = max(extruder_offset[X_AXIS][1], X2_MAX_POS); float dual_max_x = max(extruder_offset[X_AXIS][1], X2_MAX_POS);
if (active_extruder != 0) { if (active_extruder != 0) {
min_pos[X_AXIS] = X2_MIN_POS + offs; sw_endstop_min[X_AXIS] = X2_MIN_POS + offs;
max_pos[X_AXIS] = dual_max_x + offs; sw_endstop_max[X_AXIS] = dual_max_x + offs;
return; return;
} }
else if (dual_x_carriage_mode == DXC_DUPLICATION_MODE) { else if (dual_x_carriage_mode == DXC_DUPLICATION_MODE) {
min_pos[X_AXIS] = base_min_pos(X_AXIS) + offs; sw_endstop_min[X_AXIS] = base_min_pos(X_AXIS) + offs;
max_pos[X_AXIS] = min(base_max_pos(X_AXIS), dual_max_x - duplicate_extruder_x_offset) + offs; sw_endstop_max[X_AXIS] = min(base_max_pos(X_AXIS), dual_max_x - duplicate_extruder_x_offset) + offs;
return; return;
} }
} }
else else
#endif #endif
{ {
min_pos[axis] = base_min_pos(axis) + offs; sw_endstop_min[axis] = base_min_pos(axis) + offs;
max_pos[axis] = base_max_pos(axis) + offs; sw_endstop_max[axis] = base_max_pos(axis) + offs;
} }
} }
/**
* Change the home offset for an axis, update the current
* position and the software endstops to retain the same
* relative distance to the new home.
*
* Since this changes the current_position, code should
* call sync_plan_position soon after this.
*/
static void set_home_offset(AxisEnum axis, float v) { static void set_home_offset(AxisEnum axis, float v) {
current_position[axis] += v - home_offset[axis]; current_position[axis] += v - home_offset[axis];
home_offset[axis] = v; home_offset[axis] = v;
@ -1294,8 +1345,8 @@ static void set_axis_is_at_home(AxisEnum axis) {
* SCARA home positions are based on configuration since the actual * SCARA home positions are based on configuration since the actual
* limits are determined by the inverse kinematic transform. * limits are determined by the inverse kinematic transform.
*/ */
min_pos[axis] = base_min_pos(axis); // + (delta[axis] - base_home_pos(axis)); sw_endstop_min[axis] = base_min_pos(axis); // + (delta[axis] - base_home_pos(axis));
max_pos[axis] = base_max_pos(axis); // + (delta[axis] - base_home_pos(axis)); sw_endstop_max[axis] = base_max_pos(axis); // + (delta[axis] - base_home_pos(axis));
} }
else else
#endif #endif
@ -1712,7 +1763,7 @@ static void setup_for_endstop_move() {
SERIAL_ERRORLNPGM("Z-Probe failed to engage!"); SERIAL_ERRORLNPGM("Z-Probe failed to engage!");
LCD_ALERTMESSAGEPGM("Err: ZPROBE"); LCD_ALERTMESSAGEPGM("Err: ZPROBE");
} }
Stop(); stop();
} }
#endif // Z_PROBE_ALLEN_KEY #endif // Z_PROBE_ALLEN_KEY
@ -1816,7 +1867,7 @@ static void setup_for_endstop_move() {
SERIAL_ERRORLNPGM("Z-Probe failed to retract!"); SERIAL_ERRORLNPGM("Z-Probe failed to retract!");
LCD_ALERTMESSAGEPGM("Err: ZPROBE"); LCD_ALERTMESSAGEPGM("Err: ZPROBE");
} }
Stop(); stop();
} }
#endif // Z_PROBE_ALLEN_KEY #endif // Z_PROBE_ALLEN_KEY
@ -4206,7 +4257,7 @@ inline void gcode_M77() {
* M104: Set hot end temperature * M104: Set hot end temperature
*/ */
inline void gcode_M104() { inline void gcode_M104() {
if (setTargetedHotend(104)) return; if (get_target_extruder_from_command(104)) return;
if (DEBUGGING(DRYRUN)) return; if (DEBUGGING(DRYRUN)) return;
if (code_seen('S')) { if (code_seen('S')) {
@ -4314,7 +4365,7 @@ inline void gcode_M104() {
* M105: Read hot end and bed temperature * M105: Read hot end and bed temperature
*/ */
inline void gcode_M105() { inline void gcode_M105() {
if (setTargetedHotend(105)) return; if (get_target_extruder_from_command(105)) return;
#if HAS_TEMP_HOTEND || HAS_TEMP_BED #if HAS_TEMP_HOTEND || HAS_TEMP_BED
SERIAL_PROTOCOLPGM(MSG_OK); SERIAL_PROTOCOLPGM(MSG_OK);
@ -4358,7 +4409,7 @@ inline void gcode_M105() {
*/ */
inline void gcode_M109() { inline void gcode_M109() {
if (setTargetedHotend(109)) return; if (get_target_extruder_from_command(109)) return;
if (DEBUGGING(DRYRUN)) return; if (DEBUGGING(DRYRUN)) return;
bool no_wait_for_cooling = code_seen('S'); bool no_wait_for_cooling = code_seen('S');
@ -4612,22 +4663,22 @@ inline void gcode_M112() { kill(PSTR(MSG_KILLED)); }
/** /**
* M126: Heater 1 valve open * M126: Heater 1 valve open
*/ */
inline void gcode_M126() { ValvePressure = code_seen('S') ? constrain(code_value(), 0, 255) : 255; } inline void gcode_M126() { baricuda_valve_pressure = code_seen('S') ? constrain(code_value(), 0, 255) : 255; }
/** /**
* M127: Heater 1 valve close * M127: Heater 1 valve close
*/ */
inline void gcode_M127() { ValvePressure = 0; } inline void gcode_M127() { baricuda_valve_pressure = 0; }
#endif #endif
#if HAS_HEATER_2 #if HAS_HEATER_2
/** /**
* M128: Heater 2 valve open * M128: Heater 2 valve open
*/ */
inline void gcode_M128() { EtoPPressure = code_seen('S') ? constrain(code_value(), 0, 255) : 255; } inline void gcode_M128() { baricuda_e_to_p_pressure = code_seen('S') ? constrain(code_value(), 0, 255) : 255; }
/** /**
* M129: Heater 2 valve close * M129: Heater 2 valve close
*/ */
inline void gcode_M129() { EtoPPressure = 0; } inline void gcode_M129() { baricuda_e_to_p_pressure = 0; }
#endif #endif
#endif //BARICUDA #endif //BARICUDA
@ -5025,7 +5076,7 @@ inline void gcode_M121() { enable_endstops_globally(false); }
*/ */
inline void gcode_M200() { inline void gcode_M200() {
if (setTargetedHotend(200)) return; if (get_target_extruder_from_command(200)) return;
if (code_seen('D')) { if (code_seen('D')) {
float diameter = code_value(); float diameter = code_value();
@ -5277,7 +5328,7 @@ inline void gcode_M206() {
* Z<zoffset> - Available with DUAL_X_CARRIAGE * Z<zoffset> - Available with DUAL_X_CARRIAGE
*/ */
inline void gcode_M218() { inline void gcode_M218() {
if (setTargetedHotend(218)) return; if (get_target_extruder_from_command(218)) return;
if (code_seen('X')) extruder_offset[X_AXIS][target_extruder] = code_value(); if (code_seen('X')) extruder_offset[X_AXIS][target_extruder] = code_value();
if (code_seen('Y')) extruder_offset[Y_AXIS][target_extruder] = code_value(); if (code_seen('Y')) extruder_offset[Y_AXIS][target_extruder] = code_value();
@ -5316,7 +5367,7 @@ inline void gcode_M220() {
inline void gcode_M221() { inline void gcode_M221() {
if (code_seen('S')) { if (code_seen('S')) {
int sval = code_value(); int sval = code_value();
if (setTargetedHotend(221)) return; if (get_target_extruder_from_command(221)) return;
extruder_multiplier[target_extruder] = sval; extruder_multiplier[target_extruder] = sval;
} }
} }
@ -5842,7 +5893,7 @@ inline void gcode_M428() {
bool err = false; bool err = false;
for (int8_t i = X_AXIS; i <= Z_AXIS; i++) { for (int8_t i = X_AXIS; i <= Z_AXIS; i++) {
if (axis_homed[i]) { if (axis_homed[i]) {
float base = (current_position[i] > (min_pos[i] + max_pos[i]) / 2) ? base_home_pos(i) : 0, float base = (current_position[i] > (sw_endstop_min[i] + sw_endstop_max[i]) / 2) ? base_home_pos(i) : 0,
diff = current_position[i] - base; diff = current_position[i] - base;
if (diff > -20 && diff < 20) { if (diff > -20 && diff < 20) {
set_home_offset((AxisEnum)i, home_offset[i] - diff); set_home_offset((AxisEnum)i, home_offset[i] - diff);
@ -6078,7 +6129,7 @@ inline void gcode_M503() {
#endif #endif
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)
filrunoutEnqueued = false; filament_ran_out = false;
#endif #endif
} }
@ -7032,8 +7083,8 @@ void ok_to_send() {
void clamp_to_software_endstops(float target[3]) { void clamp_to_software_endstops(float target[3]) {
if (min_software_endstops) { if (min_software_endstops) {
NOLESS(target[X_AXIS], min_pos[X_AXIS]); NOLESS(target[X_AXIS], sw_endstop_min[X_AXIS]);
NOLESS(target[Y_AXIS], min_pos[Y_AXIS]); NOLESS(target[Y_AXIS], sw_endstop_min[Y_AXIS]);
float negative_z_offset = 0; float negative_z_offset = 0;
#if ENABLED(AUTO_BED_LEVELING_FEATURE) #if ENABLED(AUTO_BED_LEVELING_FEATURE)
@ -7048,13 +7099,13 @@ void clamp_to_software_endstops(float target[3]) {
negative_z_offset += home_offset[Z_AXIS]; negative_z_offset += home_offset[Z_AXIS];
} }
#endif #endif
NOLESS(target[Z_AXIS], min_pos[Z_AXIS] + negative_z_offset); NOLESS(target[Z_AXIS], sw_endstop_min[Z_AXIS] + negative_z_offset);
} }
if (max_software_endstops) { if (max_software_endstops) {
NOMORE(target[X_AXIS], max_pos[X_AXIS]); NOMORE(target[X_AXIS], sw_endstop_max[X_AXIS]);
NOMORE(target[Y_AXIS], max_pos[Y_AXIS]); NOMORE(target[Y_AXIS], sw_endstop_max[Y_AXIS]);
NOMORE(target[Z_AXIS], max_pos[Z_AXIS]); NOMORE(target[Z_AXIS], sw_endstop_max[Z_AXIS]);
} }
} }
@ -7714,7 +7765,7 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) {
#if HAS_FILRUNOUT #if HAS_FILRUNOUT
if (IS_SD_PRINTING && !(READ(FILRUNOUT_PIN) ^ FIL_RUNOUT_INVERTING)) if (IS_SD_PRINTING && !(READ(FILRUNOUT_PIN) ^ FIL_RUNOUT_INVERTING))
filrunout(); handle_filament_runout();
#endif #endif
if (commands_in_queue < BUFSIZE) get_available_commands(); if (commands_in_queue < BUFSIZE) get_available_commands();
@ -7897,9 +7948,9 @@ void kill(const char* lcd_msg) {
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)
void filrunout() { void handle_filament_runout() {
if (!filrunoutEnqueued) { if (!filament_ran_out) {
filrunoutEnqueued = true; filament_ran_out = true;
enqueue_and_echo_commands_P(PSTR(FILAMENT_RUNOUT_SCRIPT)); enqueue_and_echo_commands_P(PSTR(FILAMENT_RUNOUT_SCRIPT));
st_synchronize(); st_synchronize();
} }
@ -7968,7 +8019,7 @@ void kill(const char* lcd_msg) {
} }
#endif // FAST_PWM_FAN #endif // FAST_PWM_FAN
void Stop() { void stop() {
disable_all_heaters(); disable_all_heaters();
if (IsRunning()) { if (IsRunning()) {
Running = false; Running = false;
@ -7979,27 +8030,6 @@ void Stop() {
} }
} }
/**
* Set target_extruder from the T parameter or the active_extruder
*
* Returns TRUE if the target is invalid
*/
bool setTargetedHotend(int code) {
target_extruder = active_extruder;
if (code_seen('T')) {
target_extruder = code_value_short();
if (target_extruder >= EXTRUDERS) {
SERIAL_ECHO_START;
SERIAL_CHAR('M');
SERIAL_ECHO(code);
SERIAL_ECHOPGM(" " MSG_INVALID_EXTRUDER " ");
SERIAL_ECHOLN((int)target_extruder);
return true;
}
}
return false;
}
float calculate_volumetric_multiplier(float diameter) { float calculate_volumetric_multiplier(float diameter) {
if (!volumetric_enabled || diameter == 0) return 1.0; if (!volumetric_enabled || diameter == 0) return 1.0;
float d2 = diameter * 0.5; float d2 = diameter * 0.5;

8
Marlin/planner.cpp

@ -428,8 +428,8 @@ void check_axes_activity() {
#endif #endif
#if ENABLED(BARICUDA) #if ENABLED(BARICUDA)
unsigned char tail_valve_pressure = ValvePressure, unsigned char tail_valve_pressure = baricuda_valve_pressure,
tail_e_to_p_pressure = EtoPPressure; tail_e_to_p_pressure = baricuda_e_to_p_pressure;
#endif #endif
block_t* block; block_t* block;
@ -650,8 +650,8 @@ float junction_deviation = 0.1;
#endif #endif
#if ENABLED(BARICUDA) #if ENABLED(BARICUDA)
block->valve_pressure = ValvePressure; block->valve_pressure = baricuda_valve_pressure;
block->e_to_p_pressure = EtoPPressure; block->e_to_p_pressure = baricuda_e_to_p_pressure;
#endif #endif
// Compute direction bits for this block // Compute direction bits for this block

8
Marlin/temperature.cpp

@ -1279,13 +1279,11 @@ void disable_all_heaters() {
#define MAX6675_HEAT_INTERVAL 250u #define MAX6675_HEAT_INTERVAL 250u
#if ENABLED(MAX6675_IS_MAX31855) #if ENABLED(MAX6675_IS_MAX31855)
unsigned long max6675_temp = 2000; uint32_t max6675_temp = 2000;
#define MAX6675_READ_BYTES 4
#define MAX6675_ERROR_MASK 7 #define MAX6675_ERROR_MASK 7
#define MAX6675_DISCARD_BITS 18 #define MAX6675_DISCARD_BITS 18
#else #else
unsigned int max6675_temp = 2000; uint16_t max6675_temp = 2000;
#define MAX6675_READ_BYTES 2
#define MAX6675_ERROR_MASK 4 #define MAX6675_ERROR_MASK 4
#define MAX6675_DISCARD_BITS 3 #define MAX6675_DISCARD_BITS 3
#endif #endif
@ -1317,7 +1315,7 @@ void disable_all_heaters() {
// Read a big-endian temperature value // Read a big-endian temperature value
max6675_temp = 0; max6675_temp = 0;
for (uint8_t i = MAX6675_READ_BYTES; i--;) { for (uint8_t i = sizeof(max6675_temp); i--;) {
SPDR = 0; SPDR = 0;
for (;!TEST(SPSR, SPIF);); for (;!TEST(SPSR, SPIF););
max6675_temp |= SPDR; max6675_temp |= SPDR;

10
Marlin/ultralcd.cpp

@ -1167,13 +1167,13 @@ static void _lcd_move(const char* name, AxisEnum axis, float min, float max) {
#if ENABLED(DELTA) #if ENABLED(DELTA)
static float delta_clip_radius_2 = (DELTA_PRINTABLE_RADIUS) * (DELTA_PRINTABLE_RADIUS); static float delta_clip_radius_2 = (DELTA_PRINTABLE_RADIUS) * (DELTA_PRINTABLE_RADIUS);
static int delta_clip( float a ) { return sqrt(delta_clip_radius_2 - a*a); } static int delta_clip( float a ) { return sqrt(delta_clip_radius_2 - a*a); }
static void lcd_move_x() { int clip = delta_clip(current_position[Y_AXIS]); _lcd_move(PSTR(MSG_MOVE_X), X_AXIS, max(min_pos[X_AXIS], -clip), min(max_pos[X_AXIS], clip)); } static void lcd_move_x() { int clip = delta_clip(current_position[Y_AXIS]); _lcd_move(PSTR(MSG_MOVE_X), X_AXIS, max(sw_endstop_min[X_AXIS], -clip), min(sw_endstop_max[X_AXIS], clip)); }
static void lcd_move_y() { int clip = delta_clip(current_position[X_AXIS]); _lcd_move(PSTR(MSG_MOVE_Y), Y_AXIS, max(min_pos[Y_AXIS], -clip), min(max_pos[Y_AXIS], clip)); } static void lcd_move_y() { int clip = delta_clip(current_position[X_AXIS]); _lcd_move(PSTR(MSG_MOVE_Y), Y_AXIS, max(sw_endstop_min[Y_AXIS], -clip), min(sw_endstop_max[Y_AXIS], clip)); }
#else #else
static void lcd_move_x() { _lcd_move(PSTR(MSG_MOVE_X), X_AXIS, min_pos[X_AXIS], max_pos[X_AXIS]); } static void lcd_move_x() { _lcd_move(PSTR(MSG_MOVE_X), X_AXIS, sw_endstop_min[X_AXIS], sw_endstop_max[X_AXIS]); }
static void lcd_move_y() { _lcd_move(PSTR(MSG_MOVE_Y), Y_AXIS, min_pos[Y_AXIS], max_pos[Y_AXIS]); } static void lcd_move_y() { _lcd_move(PSTR(MSG_MOVE_Y), Y_AXIS, sw_endstop_min[Y_AXIS], sw_endstop_max[Y_AXIS]); }
#endif #endif
static void lcd_move_z() { _lcd_move(PSTR(MSG_MOVE_Z), Z_AXIS, min_pos[Z_AXIS], max_pos[Z_AXIS]); } static void lcd_move_z() { _lcd_move(PSTR(MSG_MOVE_Z), Z_AXIS, sw_endstop_min[Z_AXIS], sw_endstop_max[Z_AXIS]); }
static void lcd_move_e( static void lcd_move_e(
#if EXTRUDERS > 1 #if EXTRUDERS > 1
uint8_t e uint8_t e

Loading…
Cancel
Save