From 3d24c329af5a4dd71c40bdd918caa792b179373d Mon Sep 17 00:00:00 2001 From: Thomas Moore Date: Mon, 12 Jun 2017 23:09:44 -0500 Subject: [PATCH] M600 fixes --- Marlin/Marlin_main.cpp | 78 +++++++++++++++++++++++++++++------------- Marlin/ultralcd.cpp | 15 +++++--- 2 files changed, 65 insertions(+), 28 deletions(-) diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index a15145d31b..28c6fb058c 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -5866,7 +5866,7 @@ inline void gcode_M17() { idle(); heaters_heating = false; HOTEND_LOOP() { - if (thermalManager.degTargetHotend(e) && abs(thermalManager.degHotend(e) - thermalManager.degTargetHotend(e)) > 3) { + if (thermalManager.degTargetHotend(e) && abs(thermalManager.degHotend(e) - thermalManager.degTargetHotend(e)) > TEMP_HYSTERESIS) { heaters_heating = true; #if ENABLED(ULTIPANEL) lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_WAIT_FOR_NOZZLES_TO_HEAT); @@ -5882,7 +5882,7 @@ inline void gcode_M17() { ) { if (move_away_flag) return false; // already paused - if (!DEBUGGING(DRYRUN) && unload_length != 0) { + if (!DEBUGGING(DRYRUN) && (unload_length != 0 || retract != 0)) { #if ENABLED(PREVENT_COLD_EXTRUSION) if (!thermalManager.allow_cold_extrude && thermalManager.degTargetHotend(active_extruder) < thermalManager.extrude_min_temp) { @@ -5919,10 +5919,11 @@ inline void gcode_M17() { COPY(resume_position, current_position); set_destination_to_current(); - // Initial retract before move to filament change position - destination[E_AXIS] += retract; - - RUNPLAN(PAUSE_PARK_RETRACT_FEEDRATE); + if (retract) { + // Initial retract before move to filament change position + destination[E_AXIS] += retract; + RUNPLAN(PAUSE_PARK_RETRACT_FEEDRATE); + } // Lift Z axis if (z_lift > 0) { @@ -5951,23 +5952,25 @@ inline void gcode_M17() { destination[E_AXIS] += unload_length; RUNPLAN(FILAMENT_CHANGE_UNLOAD_FEEDRATE); stepper.synchronize(); + } - if (show_lcd) { - #if ENABLED(ULTIPANEL) - lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_INSERT); - #endif - } - - #if HAS_BUZZER - filament_change_beep(max_beep_count, true); + if (show_lcd) { + #if ENABLED(ULTIPANEL) + lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_INSERT); #endif - - idle(); } - // Disable extruders steppers for manual filament changing - disable_e_steppers(); - safe_delay(100); + #if HAS_BUZZER + filament_change_beep(max_beep_count, true); + #endif + + idle(); + + // Disable extruders steppers for manual filament changing (only on boards that have separate ENABLE_PINS) + #if E0_ENABLE_PIN != X_ENABLE_PIN && E1_ENABLE_PIN != Y_ENABLE_PIN + disable_e_steppers(); + safe_delay(100); + #endif // Start the heater idle timers const millis_t nozzle_timeout = (millis_t)(PAUSE_PARK_NOZZLE_TIMEOUT) * 1000UL; @@ -5989,14 +5992,43 @@ inline void gcode_M17() { filament_change_beep(max_beep_count); #endif + // If the nozzle has timed out, wait for the user to press the button to re-heat the nozzle, then + // re-heat the nozzle, re-show the insert screen, restart the idle timers, and start over if (!nozzle_timed_out) HOTEND_LOOP() nozzle_timed_out |= thermalManager.is_heater_idle(e); - #if ENABLED(ULTIPANEL) - if (nozzle_timed_out) + if (nozzle_timed_out) { + #if ENABLED(ULTIPANEL) lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_CLICK_TO_HEAT_NOZZLE); - #endif + #endif + + // Wait for LCD click or M108 + while (wait_for_user) idle(true); + + // Re-enable the heaters if they timed out + HOTEND_LOOP() thermalManager.reset_heater_idle_timer(e); + + // Wait for the heaters to reach the target temperatures + ensure_safe_temperature(); + + #if ENABLED(ULTIPANEL) + lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_INSERT); + #endif + + // Start the heater idle timers + const millis_t nozzle_timeout = (millis_t)(PAUSE_PARK_NOZZLE_TIMEOUT) * 1000UL; + + HOTEND_LOOP() + thermalManager.start_heater_idle_timer(e, nozzle_timeout); + + wait_for_user = true; /* Wait for user to load filament */ + nozzle_timed_out = false; + + #if HAS_BUZZER + filament_change_beep(max_beep_count, true); + #endif + } idle(true); } @@ -7643,7 +7675,7 @@ inline void gcode_M18_M84() { if (parser.seen('X')) disable_X(); if (parser.seen('Y')) disable_Y(); if (parser.seen('Z')) disable_Z(); - #if ((E0_ENABLE_PIN != X_ENABLE_PIN) && (E1_ENABLE_PIN != Y_ENABLE_PIN)) // Only enable on boards that have seperate ENABLE_PINS + #if E0_ENABLE_PIN != X_ENABLE_PIN && E1_ENABLE_PIN != Y_ENABLE_PIN // Only enable on boards that have seperate ENABLE_PINS if (parser.seen('E')) disable_e_steppers(); #endif } diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index 23cdba92cc..61f8ee7e9b 100644 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -1107,11 +1107,16 @@ void kill_screen(const char* lcd_msg) { #if ENABLED(ADVANCED_PAUSE_FEATURE) void lcd_enqueue_filament_change() { - if (!DEBUGGING(DRYRUN) && thermalManager.tooColdToExtrude(active_extruder)) { - lcd_save_previous_screen(); - lcd_goto_screen(lcd_advanced_pause_toocold_menu); - return; - } + + #if ENABLED(PREVENT_COLD_EXTRUSION) + if (!DEBUGGING(DRYRUN) && !thermalManager.allow_cold_extrude && + thermalManager.degTargetHotend(active_extruder) < thermalManager.extrude_min_temp) { + lcd_save_previous_screen(); + lcd_goto_screen(lcd_advanced_pause_toocold_menu); + return; + } + #endif + lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_INIT); enqueue_and_echo_commands_P(PSTR("M600 B0")); }