diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 5eb7654ae1..5da3de8ae3 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/default/Configuration_adv.h b/Marlin/src/config/default/Configuration_adv.h
index 5eb7654ae1..5da3de8ae3 100755
--- a/Marlin/src/config/default/Configuration_adv.h
+++ b/Marlin/src/config/default/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index 3803cb3a41..5b1d88d6d4 100644
--- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/Anet/A2/Configuration_adv.h b/Marlin/src/config/examples/Anet/A2/Configuration_adv.h
index fa8ac434df..485d90b7c6 100644
--- a/Marlin/src/config/examples/Anet/A2/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A2/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h b/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h
index fa8ac434df..485d90b7c6 100644
--- a/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
index de1860e020..c599768a6f 100644
--- a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
index f24200bfd2..48315b2f50 100644
--- a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
index 3fb6eaceb0..fc6691b133 100644
--- a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
+++ b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h
index 7f53298ccd..850c1b6bfc 100644
--- a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h
+++ b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
index e44d3efc3e..b78d222af0 100644
--- a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
index aaa2c6845b..3d0c02a6eb 100644
--- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -1281,7 +1281,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
index e44d3efc3e..b78d222af0 100644
--- a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/Cartesio/Configuration_adv.h b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
index 830d04bdcb..3311bf30c4 100644
--- a/Marlin/src/config/examples/Cartesio/Configuration_adv.h
+++ b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
index 23e4eb3bc2..95fe702c91 100755
--- a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
index 193f8f084d..c9c80ab036 100644
--- a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
index bf4e7bb019..a69ea8682c 100644
--- a/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h
index 87254cd3e6..f89b60ee4e 100644
--- a/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h
index e8905eeee8..4127e43433 100644
--- a/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h
index 73459acd18..b425286100 100644
--- a/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h
index 87254cd3e6..f89b60ee4e 100644
--- a/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/Einstart-S/Configuration_adv.h b/Marlin/src/config/examples/Einstart-S/Configuration_adv.h
index 6ab1fe2784..c94c75b641 100644
--- a/Marlin/src/config/examples/Einstart-S/Configuration_adv.h
+++ b/Marlin/src/config/examples/Einstart-S/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/Felix/Configuration_adv.h b/Marlin/src/config/examples/Felix/Configuration_adv.h
index a7218a3b7b..89c7c437e7 100644
--- a/Marlin/src/config/examples/Felix/Configuration_adv.h
+++ b/Marlin/src/config/examples/Felix/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index 497b4d8836..ecd40540e1 100644
--- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h b/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h
index 8089151372..444dbc801e 100644
--- a/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h
+++ b/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h
@@ -1275,7 +1275,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
index 52e951f6d5..719d123aaa 100644
--- a/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
+++ b/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
@@ -1277,7 +1277,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h
index b5e7d64cad..afa07598f6 100644
--- a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h
+++ b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h
@@ -1278,7 +1278,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
index 8b8874ddee..a196c41b26 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h	
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h	
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
index 8b8874ddee..a196c41b26 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h	
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h	
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
index e6c0f68422..56885982eb 100644
--- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
index c8d944862a..889ff7ef9c 100644
--- a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/MakerParts/Configuration_adv.h b/Marlin/src/config/examples/MakerParts/Configuration_adv.h
index b05ef38895..5136fa4f87 100644
--- a/Marlin/src/config/examples/MakerParts/Configuration_adv.h
+++ b/Marlin/src/config/examples/MakerParts/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
index 0cdc4e48d4..bf3fe7d201 100644
--- a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
+++ b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
index 1e9cdaf5fa..6203a2b328 100644
--- a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
+++ b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index cbb57190ab..5d5dac0c09 100644
--- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
index 18bd844a41..b045d7e011 100644
--- a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
@@ -1281,7 +1281,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/RigidBot/Configuration_adv.h b/Marlin/src/config/examples/RigidBot/Configuration_adv.h
index ab16fe8ce4..9cb76fd236 100644
--- a/Marlin/src/config/examples/RigidBot/Configuration_adv.h
+++ b/Marlin/src/config/examples/RigidBot/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/SCARA/Configuration_adv.h b/Marlin/src/config/examples/SCARA/Configuration_adv.h
index 124536c02c..ca18da249f 100644
--- a/Marlin/src/config/examples/SCARA/Configuration_adv.h
+++ b/Marlin/src/config/examples/SCARA/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
index 32a0ab2945..56211c8041 100644
--- a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
+++ b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/TheBorg/Configuration_adv.h b/Marlin/src/config/examples/TheBorg/Configuration_adv.h
index 6d35b86419..1e0026ae93 100644
--- a/Marlin/src/config/examples/TheBorg/Configuration_adv.h
+++ b/Marlin/src/config/examples/TheBorg/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
index 8e53a130f2..cc8dad786f 100644
--- a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
+++ b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h b/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h
index 134e458800..4d2bd981c3 100644
--- a/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h
+++ b/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
index ed1027d6d1..ad23be3840 100644
--- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
index daa6e11afd..c8fc716d2f 100644
--- a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
@@ -1286,7 +1286,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
index 7bdc82ef19..7aee594545 100644
--- a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
index c0736741c7..a6a1b60467 100644
--- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
+++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
@@ -1275,7 +1275,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
index f7ea412dae..bc09cd10c4 100644
--- a/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
@@ -1275,7 +1275,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index ff2a5a8331..ba0f625f86 100644
--- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -1275,7 +1275,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
index ff2a5a8331..ba0f625f86 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
@@ -1275,7 +1275,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index 628b22fcf2..59f1bd8528 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -1275,7 +1275,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/delta/generic/Configuration_adv.h b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
index 628b22fcf2..59f1bd8528 100644
--- a/Marlin/src/config/examples/delta/generic/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
@@ -1275,7 +1275,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
index 628b22fcf2..59f1bd8528 100644
--- a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
@@ -1275,7 +1275,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
index 52d0c78498..98691cc07a 100644
--- a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -1275,7 +1275,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index 238004001f..a2033c827e 100644
--- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/makibox/Configuration_adv.h b/Marlin/src/config/examples/makibox/Configuration_adv.h
index 1a231ed343..cd4246089b 100644
--- a/Marlin/src/config/examples/makibox/Configuration_adv.h
+++ b/Marlin/src/config/examples/makibox/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
index 99a49f3010..26a7b2a020 100644
--- a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -1273,7 +1273,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/config/examples/wt150/Configuration_adv.h b/Marlin/src/config/examples/wt150/Configuration_adv.h
index f980f1f143..a36feeddc1 100644
--- a/Marlin/src/config/examples/wt150/Configuration_adv.h
+++ b/Marlin/src/config/examples/wt150/Configuration_adv.h
@@ -1274,7 +1274,7 @@
 
   /**
    * Use StallGuard2 to probe the bed with the nozzle.
-   * 
+   *
    * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
    *          to move the Z axis. Take extreme care when attempting to enable this feature.
    */
diff --git a/Marlin/src/module/motion.cpp b/Marlin/src/module/motion.cpp
index 8f8965576a..dbf85e4548 100644
--- a/Marlin/src/module/motion.cpp
+++ b/Marlin/src/module/motion.cpp
@@ -287,7 +287,6 @@ void buffer_line_to_destination(const float fr_mm_s) {
 
 /**
  *  Plan a move to (X, Y, Z) and set the current_position
- *  The final current_position may not be the one that was requested
  */
 void do_blocking_move_to(const float rx, const float ry, const float rz, const float &fr_mm_s/*=0.0*/) {
   const float old_feedrate_mm_s = feedrate_mm_s;
diff --git a/Marlin/src/module/probe.cpp b/Marlin/src/module/probe.cpp
index 0ebeaaaed5..97b2efeff9 100644
--- a/Marlin/src/module/probe.cpp
+++ b/Marlin/src/module/probe.cpp
@@ -551,7 +551,7 @@ static bool do_probe_move(const float z, const float fr_mm_s) {
   do_blocking_move_to_z(z, fr_mm_s);
 
   // Check to see if the probe was triggered
-  const bool probe_triggered = 
+  const bool probe_triggered =
     #if ENABLED(DELTA) && ENABLED(SENSORLESS_PROBING)
       endstops.trigger_state() & (_BV(X_MIN) | _BV(Y_MIN) | _BV(Z_MIN))
     #else