Browse Source

Merge pull request #5089 from thinkyhead/rc_break_m1_fix

Centralize click-handling in the LCD loop
pull/1/head
Scott Lahteine 8 years ago
committed by GitHub
parent
commit
3c3fe1a1ba
  1. 2
      Marlin/Marlin.h
  2. 5
      Marlin/MarlinSerial.cpp
  3. 129
      Marlin/Marlin_main.cpp
  4. 63
      Marlin/configuration_store.cpp
  5. 16
      Marlin/planner.h
  6. 166
      Marlin/ultralcd.cpp
  7. 62
      Marlin/ultralcd.h

2
Marlin/Marlin.h

@ -270,7 +270,7 @@ extern bool axis_known_position[XYZ]; // axis[n].is_known
extern bool axis_homed[XYZ]; // axis[n].is_homed
extern volatile bool wait_for_heatup;
#if ENABLED(ULTIPANEL) || ENABLED(EMERGENCY_PARSER)
#if ENABLED(EMERGENCY_PARSER) || ENABLED(ULTIPANEL)
extern volatile bool wait_for_user;
#endif

5
Marlin/MarlinSerial.cpp

@ -508,10 +508,7 @@ MarlinSerial customizedSerial;
if (c == '\n') {
switch (state) {
case state_M108:
wait_for_heatup = false;
#if DISABLED(ULTIPANEL)
wait_for_user = false;
#endif
wait_for_user = wait_for_heatup = false;
break;
case state_M112:
kill(PSTR(MSG_KILLED));

129
Marlin/Marlin_main.cpp

@ -1046,7 +1046,12 @@ inline void get_serial_commands() {
#if DISABLED(EMERGENCY_PARSER)
// If command was e-stop process now
if (strcmp(command, "M108") == 0) wait_for_heatup = false;
if (strcmp(command, "M108") == 0) {
wait_for_heatup = false;
#if ENABLED(ULTIPANEL)
wait_for_user = false;
#endif
}
if (strcmp(command, "M112") == 0) kill(PSTR(MSG_KILLED));
if (strcmp(command, "M410") == 0) { quickstop_stepper(); }
#endif
@ -4414,7 +4419,6 @@ inline void gcode_G92() {
dontExpireStatus();
#endif
}
lcd_ignore_click();
#else
@ -4425,53 +4429,28 @@ inline void gcode_G92() {
#endif
#if ENABLED(EMERGENCY_PARSER)
wait_for_user = true;
#endif
wait_for_user = true;
KEEPALIVE_STATE(PAUSED_FOR_USER);
stepper.synchronize();
refresh_cmd_timeout();
#if ENABLED(ULTIPANEL)
#if ENABLED(EMERGENCY_PARSER)
#define M1_WAIT_CONDITION (!lcd_clicked() && wait_for_user)
if (codenum > 0) {
codenum += previous_cmd_ms; // wait until this time for a click
while (PENDING(millis(), codenum) && wait_for_user) idle();
}
else {
#if ENABLED(ULTIPANEL)
if (lcd_detected()) {
while (wait_for_user) idle();
IS_SD_PRINTING ? LCD_MESSAGEPGM(MSG_RESUMING) : LCD_MESSAGEPGM(WELCOME_MSG);
}
#else
#define M1_WAIT_CONDITION !lcd_clicked()
while (wait_for_user) idle();
#endif
}
if (codenum > 0) {
codenum += previous_cmd_ms; // wait until this time for a click
while (PENDING(millis(), codenum) && M1_WAIT_CONDITION) idle();
lcd_ignore_click(false);
}
else if (lcd_detected()) {
while (M1_WAIT_CONDITION) idle();
}
else goto ExitM1;
IS_SD_PRINTING ? LCD_MESSAGEPGM(MSG_RESUMING) : LCD_MESSAGEPGM(WELCOME_MSG);
#else
if (codenum > 0) {
codenum += previous_cmd_ms; // wait until this time for an M108
while (PENDING(millis(), codenum) && wait_for_user) idle();
}
else while (wait_for_user) idle();
#endif
#if ENABLED(ULTIPANEL)
ExitM1:
#endif
#if ENABLED(EMERGENCY_PARSER)
wait_for_user = false;
#endif
wait_for_user = false;
KEEPALIVE_STATE(IN_HANDLER);
}
@ -5539,47 +5518,27 @@ inline void gcode_M140() {
* F<fan speed>
*/
inline void gcode_M145() {
int8_t material = code_seen('S') ? (int8_t)code_value_int() : 0;
if (material < 0 || material > 1) {
uint8_t material = code_seen('S') ? (uint8_t)code_value_int() : 0;
if (material >= COUNT(lcd_preheat_hotend_temp)) {
SERIAL_ERROR_START;
SERIAL_ERRORLNPGM(MSG_ERR_MATERIAL_INDEX);
}
else {
int v;
switch (material) {
case 0:
if (code_seen('H')) {
v = code_value_int();
preheatHotendTemp1 = constrain(v, EXTRUDE_MINTEMP, HEATER_0_MAXTEMP - 15);
}
if (code_seen('F')) {
v = code_value_int();
preheatFanSpeed1 = constrain(v, 0, 255);
}
#if TEMP_SENSOR_BED != 0
if (code_seen('B')) {
v = code_value_int();
preheatBedTemp1 = constrain(v, BED_MINTEMP, BED_MAXTEMP - 15);
}
#endif
break;
case 1:
if (code_seen('H')) {
v = code_value_int();
preheatHotendTemp2 = constrain(v, EXTRUDE_MINTEMP, HEATER_0_MAXTEMP - 15);
}
if (code_seen('F')) {
v = code_value_int();
preheatFanSpeed2 = constrain(v, 0, 255);
}
#if TEMP_SENSOR_BED != 0
if (code_seen('B')) {
v = code_value_int();
preheatBedTemp2 = constrain(v, BED_MINTEMP, BED_MAXTEMP - 15);
}
#endif
break;
if (code_seen('H')) {
v = code_value_int();
lcd_preheat_hotend_temp[material] = constrain(v, EXTRUDE_MINTEMP, HEATER_0_MAXTEMP - 15);
}
if (code_seen('F')) {
v = code_value_int();
lcd_preheat_fan_speed[material] = constrain(v, 0, 255);
}
#if TEMP_SENSOR_BED != 0
if (code_seen('B')) {
v = code_value_int();
lcd_preheat_bed_temp[material] = constrain(v, BED_MINTEMP, BED_MAXTEMP - 15);
}
#endif
}
}
@ -5590,13 +5549,9 @@ inline void gcode_M140() {
* M149: Set temperature units
*/
inline void gcode_M149() {
if (code_seen('C')) {
set_input_temp_units(TEMPUNIT_C);
} else if (code_seen('K')) {
set_input_temp_units(TEMPUNIT_K);
} else if (code_seen('F')) {
set_input_temp_units(TEMPUNIT_F);
}
if (code_seen('C')) set_input_temp_units(TEMPUNIT_C);
else if (code_seen('K')) set_input_temp_units(TEMPUNIT_K);
else if (code_seen('F')) set_input_temp_units(TEMPUNIT_F);
}
#endif
@ -6874,7 +6829,10 @@ inline void gcode_M503() {
// Wait for filament insert by user and press button
lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_INSERT);
while (!lcd_clicked()) {
// LCD click or M108 will clear this
wait_for_user = true;
while (wait_for_user) {
#if HAS_BUZZER
millis_t ms = millis();
if (ms >= next_buzz) {
@ -6884,9 +6842,6 @@ inline void gcode_M503() {
#endif
idle(true);
}
delay(100);
while (lcd_clicked()) idle(true);
delay(100);
// Show load message
lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_LOAD);

63
Marlin/configuration_store.cpp

@ -86,12 +86,9 @@
* 301 M666 Z z_endstop_adj (float)
*
* ULTIPANEL:
* 305 M145 S0 H preheatHotendTemp1 (int)
* 307 M145 S0 B preheatBedTemp1 (int)
* 309 M145 S0 F preheatFanSpeed1 (int)
* 311 M145 S1 H preheatHotendTemp2 (int)
* 313 M145 S1 B preheatBedTemp2 (int)
* 315 M145 S1 F preheatFanSpeed2 (int)
* 305 M145 S0 H lcd_preheat_hotend_temp (int x2)
* 309 M145 S0 B lcd_preheat_bed_temp (int x2)
* 313 M145 S0 F lcd_preheat_fan_speed (int x2)
*
* PIDTEMP:
* 317 M301 E0 PIDC Kp[0], Ki[0], Kd[0], Kc[0] (float x4)
@ -277,16 +274,14 @@ void Config_Postprocess() {
#endif
#if DISABLED(ULTIPANEL)
int preheatHotendTemp1 = PREHEAT_1_TEMP_HOTEND, preheatBedTemp1 = PREHEAT_1_TEMP_BED, preheatFanSpeed1 = PREHEAT_1_FAN_SPEED,
preheatHotendTemp2 = PREHEAT_2_TEMP_HOTEND, preheatBedTemp2 = PREHEAT_2_TEMP_BED, preheatFanSpeed2 = PREHEAT_2_FAN_SPEED;
const int lcd_preheat_hotend_temp[2] = { PREHEAT_1_TEMP_HOTEND, PREHEAT_2_TEMP_HOTEND },
lcd_preheat_bed_temp[2] = { PREHEAT_1_TEMP_BED, PREHEAT_2_TEMP_BED },
lcd_preheat_fan_speed[2] = { PREHEAT_1_FAN_SPEED, PREHEAT_2_FAN_SPEED };
#endif // !ULTIPANEL
EEPROM_WRITE(preheatHotendTemp1);
EEPROM_WRITE(preheatBedTemp1);
EEPROM_WRITE(preheatFanSpeed1);
EEPROM_WRITE(preheatHotendTemp2);
EEPROM_WRITE(preheatBedTemp2);
EEPROM_WRITE(preheatFanSpeed2);
EEPROM_WRITE(lcd_preheat_hotend_temp);
EEPROM_WRITE(lcd_preheat_bed_temp);
EEPROM_WRITE(lcd_preheat_fan_speed);
for (uint8_t e = 0; e < MAX_EXTRUDERS; e++) {
@ -465,16 +460,12 @@ void Config_Postprocess() {
#endif
#if DISABLED(ULTIPANEL)
int preheatHotendTemp1, preheatBedTemp1, preheatFanSpeed1,
preheatHotendTemp2, preheatBedTemp2, preheatFanSpeed2;
int lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2], lcd_preheat_fan_speed[2];
#endif
EEPROM_READ(preheatHotendTemp1);
EEPROM_READ(preheatBedTemp1);
EEPROM_READ(preheatFanSpeed1);
EEPROM_READ(preheatHotendTemp2);
EEPROM_READ(preheatBedTemp2);
EEPROM_READ(preheatFanSpeed2);
EEPROM_READ(lcd_preheat_hotend_temp);
EEPROM_READ(lcd_preheat_bed_temp);
EEPROM_READ(lcd_preheat_fan_speed);
#if ENABLED(PIDTEMP)
for (uint8_t e = 0; e < MAX_EXTRUDERS; e++) {
@ -639,12 +630,12 @@ void Config_ResetDefault() {
#endif
#if ENABLED(ULTIPANEL)
preheatHotendTemp1 = PREHEAT_1_TEMP_HOTEND;
preheatBedTemp1 = PREHEAT_1_TEMP_BED;
preheatFanSpeed1 = PREHEAT_1_FAN_SPEED;
preheatHotendTemp2 = PREHEAT_2_TEMP_HOTEND;
preheatBedTemp2 = PREHEAT_2_TEMP_BED;
preheatFanSpeed2 = PREHEAT_2_FAN_SPEED;
lcd_preheat_hotend_temp[0] = PREHEAT_1_TEMP_HOTEND;
lcd_preheat_hotend_temp[1] = PREHEAT_2_TEMP_HOTEND;
lcd_preheat_bed_temp[0] = PREHEAT_1_TEMP_BED;
lcd_preheat_bed_temp[1] = PREHEAT_2_TEMP_BED;
lcd_preheat_fan_speed[0] = PREHEAT_1_FAN_SPEED;
lcd_preheat_fan_speed[1] = PREHEAT_2_FAN_SPEED;
#endif
#if HAS_LCD_CONTRAST
@ -863,15 +854,13 @@ void Config_ResetDefault() {
SERIAL_ECHOLNPGM("Material heatup parameters:");
CONFIG_ECHO_START;
}
SERIAL_ECHOPAIR(" M145 S0 H", preheatHotendTemp1);
SERIAL_ECHOPAIR(" B", preheatBedTemp1);
SERIAL_ECHOPAIR(" F", preheatFanSpeed1);
SERIAL_EOL;
CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" M145 S1 H", preheatHotendTemp2);
SERIAL_ECHOPAIR(" B", preheatBedTemp2);
SERIAL_ECHOPAIR(" F", preheatFanSpeed2);
SERIAL_EOL;
for (uint8_t i = 0; i < COUNT(lcd_preheat_hotend_temp); i++) {
SERIAL_ECHOPAIR(" M145 S", (int)i);
SERIAL_ECHOPAIR(" H", lcd_preheat_hotend_temp[i]);
SERIAL_ECHOPAIR(" B", lcd_preheat_bed_temp[i]);
SERIAL_ECHOPAIR(" F", lcd_preheat_fan_speed[i]);
SERIAL_EOL;
}
#endif // ULTIPANEL
#if HAS_PID_HEATING

16
Marlin/planner.h

@ -264,7 +264,7 @@ class Planner {
* fr_mm_s - (target) speed of the move (mm/s)
* extruder - target extruder
*/
static FORCE_INLINE void buffer_line(ARG_X, ARG_Y, ARG_Z, const float &e, float fr_mm_s, const uint8_t extruder) {
static FORCE_INLINE void buffer_line(ARG_X, ARG_Y, ARG_Z, const float &e, const float &fr_mm_s, const uint8_t extruder) {
#if PLANNER_LEVELING && IS_CARTESIAN
apply_leveling(lx, ly, lz);
#endif
@ -280,7 +280,7 @@ class Planner {
* fr_mm_s - (target) speed of the move (mm/s)
* extruder - target extruder
*/
static FORCE_INLINE void buffer_line_kinematic(const float target[XYZE], float fr_mm_s, const uint8_t extruder) {
static FORCE_INLINE void buffer_line_kinematic(const float target[XYZE], const float &fr_mm_s, const uint8_t extruder) {
#if PLANNER_LEVELING
float pos[XYZ] = { target[X_AXIS], target[Y_AXIS], target[Z_AXIS] };
apply_leveling(pos);
@ -311,9 +311,9 @@ class Planner {
_set_position_mm(lx, ly, lz, e);
}
static void set_position_mm_kinematic(const float position[NUM_AXIS]);
static void set_position_mm(const AxisEnum axis, const float& v);
static FORCE_INLINE void set_z_position_mm(const float& z) { set_position_mm(Z_AXIS, z); }
static FORCE_INLINE void set_e_position_mm(const float& e) { set_position_mm(E_AXIS, e); }
static void set_position_mm(const AxisEnum axis, const float &v);
static FORCE_INLINE void set_z_position_mm(const float &z) { set_position_mm(Z_AXIS, z); }
static FORCE_INLINE void set_e_position_mm(const float &e) { set_position_mm(E_AXIS, e); }
/**
* Sync from the stepper positions. (e.g., after an interrupted move)
@ -369,7 +369,7 @@ class Planner {
* Calculate the distance (not time) it takes to accelerate
* from initial_rate to target_rate using the given acceleration:
*/
static float estimate_acceleration_distance(float initial_rate, float target_rate, float accel) {
static float estimate_acceleration_distance(const float &initial_rate, const float &target_rate, const float &accel) {
if (accel == 0) return 0; // accel was 0, set acceleration distance to 0
return (sq(target_rate) - sq(initial_rate)) / (accel * 2);
}
@ -382,7 +382,7 @@ class Planner {
* This is used to compute the intersection point between acceleration and deceleration
* in cases where the "trapezoid" has no plateau (i.e., never reaches maximum speed)
*/
static float intersection_distance(float initial_rate, float final_rate, float accel, float distance) {
static float intersection_distance(const float &initial_rate, const float &final_rate, const float &accel, const float &distance) {
if (accel == 0) return 0; // accel was 0, set intersection distance to 0
return (accel * 2 * distance - sq(initial_rate) + sq(final_rate)) / (accel * 4);
}
@ -392,7 +392,7 @@ class Planner {
* to reach 'target_velocity' using 'acceleration' within a given
* 'distance'.
*/
static float max_allowable_speed(float accel, float target_velocity, float distance) {
static float max_allowable_speed(const float &accel, const float &target_velocity, const float &distance) {
return sqrt(sq(target_velocity) - 2 * accel * distance);
}

166
Marlin/ultralcd.cpp

@ -43,8 +43,7 @@
#include "duration_t.h"
#endif
int preheatHotendTemp1, preheatBedTemp1, preheatFanSpeed1,
preheatHotendTemp2, preheatBedTemp2, preheatFanSpeed2;
int lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2], lcd_preheat_fan_speed[2];
#if ENABLED(FILAMENT_LCD_DISPLAY)
millis_t previous_lcd_status_ms = 0;
@ -243,7 +242,6 @@ uint8_t lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; // Set when the LCD needs to
*
* START_MENU Opening code for a screen with menu items.
* Scroll as-needed to keep the selected line in view.
* 'wasClicked' indicates the controller was clicked.
*/
#define START_SCREEN() \
START_SCREEN_OR_MENU(LCD_HEIGHT); \
@ -257,7 +255,6 @@ uint8_t lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; // Set when the LCD needs to
if (encoderLine >= encoderTopLine + LCD_HEIGHT) { \
encoderTopLine = encoderLine - (LCD_HEIGHT - 1); \
} \
bool wasClicked = LCD_CLICKED; \
bool _skipStatic = true; \
SCREEN_OR_MENU_LOOP()
@ -288,8 +285,7 @@ uint8_t lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; // Set when the LCD needs to
if (_menuLineNr == _thisItemNr) { \
if (lcdDrawUpdate) \
lcd_implementation_drawmenu_ ## TYPE(encoderLine == _thisItemNr, _lcdLineNr, PSTR(LABEL), ## __VA_ARGS__); \
if (wasClicked && encoderLine == _thisItemNr) { \
lcd_quick_feedback()
if (lcd_clicked && encoderLine == _thisItemNr) {
#define _MENU_ITEM_PART_2(TYPE, ...) \
menu_action_ ## TYPE(__VA_ARGS__); \
@ -381,9 +377,8 @@ uint8_t lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; // Set when the LCD needs to
menuPosition screen_history[10];
uint8_t screen_history_depth = 0;
bool ignore_click = false;
bool wait_for_unclick;
bool defer_return_to_status = false;
// LCD and menu clicks
bool lcd_clicked, wait_for_unclick, defer_return_to_status;
// Variables used when editing values.
const char* editLabel;
@ -392,9 +387,9 @@ uint8_t lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; // Set when the LCD needs to
screenFunc_t callbackFunc; // call this after editing
/**
* General function to go directly to a menu
* General function to go directly to a screen
*/
static void lcd_goto_screen(screenFunc_t screen, const bool feedback = false, const uint32_t encoder = 0) {
static void lcd_goto_screen(screenFunc_t screen, const uint32_t encoder = 0) {
if (currentScreen != screen) {
currentScreen = screen;
encoderPosition = encoder;
@ -402,7 +397,6 @@ uint8_t lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; // Set when the LCD needs to
defer_return_to_status = false;
screen_history_depth = 0;
}
if (feedback) lcd_quick_feedback();
lcd_implementation_clear();
#if ENABLED(LCD_PROGRESS_BAR)
// For LCD_PROGRESS_BAR re-initialize custom characters
@ -427,7 +421,6 @@ uint8_t lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; // Set when the LCD needs to
--screen_history_depth;
lcd_goto_screen(
screen_history[screen_history_depth].menu_function,
feedback,
screen_history[screen_history_depth].encoder_position
);
}
@ -435,11 +428,6 @@ uint8_t lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; // Set when the LCD needs to
lcd_return_to_status();
}
void lcd_ignore_click(bool b) {
ignore_click = b;
wait_for_unclick = false;
}
#endif // ULTIPANEL
/**
@ -493,23 +481,7 @@ static void lcd_status_screen() {
#if ENABLED(ULTIPANEL)
bool current_click = LCD_CLICKED;
if (ignore_click) {
if (wait_for_unclick) {
if (!current_click)
ignore_click = wait_for_unclick = false;
else
current_click = false;
}
else if (current_click) {
lcd_quick_feedback();
wait_for_unclick = true;
current_click = false;
}
}
if (current_click) {
if (lcd_clicked) {
#if ENABLED(FILAMENT_LCD_DISPLAY)
previous_lcd_status_ms = millis(); // get status message to show up for a while
#endif
@ -518,7 +490,7 @@ static void lcd_status_screen() {
false
#endif
);
lcd_goto_screen(lcd_main_menu, true);
lcd_goto_screen(lcd_main_menu);
}
#if ENABLED(ULTIPANEL_FEEDMULTIPLY)
@ -676,7 +648,7 @@ void kill_screen(const char* lcd_msg) {
long babysteps_done = 0;
static void _lcd_babystep(const AxisEnum axis, const char* msg) {
if (LCD_CLICKED) { defer_return_to_status = false; lcd_goto_previous_menu(true); return; }
if (lcd_clicked) { defer_return_to_status = false; return lcd_goto_previous_menu(true); }
ENCODER_DIRECTION_NORMAL();
if (encoderPosition) {
int babystep_increment = (int32_t)encoderPosition * BABYSTEP_MULTIPLICATOR;
@ -914,29 +886,29 @@ void kill_screen(const char* lcd_msg) {
}
#if TEMP_SENSOR_0 != 0
void lcd_preheat_pla0() { _lcd_preheat(0, preheatHotendTemp1, preheatBedTemp1, preheatFanSpeed1); }
void lcd_preheat_abs0() { _lcd_preheat(0, preheatHotendTemp2, preheatBedTemp2, preheatFanSpeed2); }
void lcd_preheat_pla0() { _lcd_preheat(0, lcd_preheat_hotend_temp[0], lcd_preheat_bed_temp[0], lcd_preheat_fan_speed[0]); }
void lcd_preheat_abs0() { _lcd_preheat(0, lcd_preheat_hotend_temp[1], lcd_preheat_bed_temp[1], lcd_preheat_fan_speed[1]); }
#endif
#if HOTENDS > 1
void lcd_preheat_pla1() { _lcd_preheat(1, preheatHotendTemp1, preheatBedTemp1, preheatFanSpeed1); }
void lcd_preheat_abs1() { _lcd_preheat(1, preheatHotendTemp2, preheatBedTemp2, preheatFanSpeed2); }
void lcd_preheat_pla1() { _lcd_preheat(1, lcd_preheat_hotend_temp[0], lcd_preheat_bed_temp[0], lcd_preheat_fan_speed[0]); }
void lcd_preheat_abs1() { _lcd_preheat(1, lcd_preheat_hotend_temp[1], lcd_preheat_bed_temp[1], lcd_preheat_fan_speed[1]); }
#if HOTENDS > 2
void lcd_preheat_pla2() { _lcd_preheat(2, preheatHotendTemp1, preheatBedTemp1, preheatFanSpeed1); }
void lcd_preheat_abs2() { _lcd_preheat(2, preheatHotendTemp2, preheatBedTemp2, preheatFanSpeed2); }
void lcd_preheat_pla2() { _lcd_preheat(2, lcd_preheat_hotend_temp[0], lcd_preheat_bed_temp[0], lcd_preheat_fan_speed[0]); }
void lcd_preheat_abs2() { _lcd_preheat(2, lcd_preheat_hotend_temp[1], lcd_preheat_bed_temp[1], lcd_preheat_fan_speed[1]); }
#if HOTENDS > 3
void lcd_preheat_pla3() { _lcd_preheat(3, preheatHotendTemp1, preheatBedTemp1, preheatFanSpeed1); }
void lcd_preheat_abs3() { _lcd_preheat(3, preheatHotendTemp2, preheatBedTemp2, preheatFanSpeed2); }
void lcd_preheat_pla3() { _lcd_preheat(3, lcd_preheat_hotend_temp[0], lcd_preheat_bed_temp[0], lcd_preheat_fan_speed[0]); }
void lcd_preheat_abs3() { _lcd_preheat(3, lcd_preheat_hotend_temp[1], lcd_preheat_bed_temp[1], lcd_preheat_fan_speed[1]); }
#endif
#endif
void lcd_preheat_pla0123() {
#if HOTENDS > 1
thermalManager.setTargetHotend(preheatHotendTemp1, 1);
thermalManager.setTargetHotend(lcd_preheat_hotend_temp[0], 1);
#if HOTENDS > 2
thermalManager.setTargetHotend(preheatHotendTemp1, 2);
thermalManager.setTargetHotend(lcd_preheat_hotend_temp[0], 2);
#if HOTENDS > 3
thermalManager.setTargetHotend(preheatHotendTemp1, 3);
thermalManager.setTargetHotend(lcd_preheat_hotend_temp[0], 3);
#endif
#endif
#endif
@ -944,11 +916,11 @@ void kill_screen(const char* lcd_msg) {
}
void lcd_preheat_abs0123() {
#if HOTENDS > 1
thermalManager.setTargetHotend(preheatHotendTemp2, 1);
thermalManager.setTargetHotend(lcd_preheat_hotend_temp[1], 1);
#if HOTENDS > 2
thermalManager.setTargetHotend(preheatHotendTemp2, 2);
thermalManager.setTargetHotend(lcd_preheat_hotend_temp[1], 2);
#if HOTENDS > 3
thermalManager.setTargetHotend(preheatHotendTemp2, 3);
thermalManager.setTargetHotend(lcd_preheat_hotend_temp[1], 3);
#endif
#endif
#endif
@ -958,8 +930,8 @@ void kill_screen(const char* lcd_msg) {
#endif // HOTENDS > 1
#if TEMP_SENSOR_BED != 0
void lcd_preheat_pla_bedonly() { _lcd_preheat(0, 0, preheatBedTemp1, preheatFanSpeed1); }
void lcd_preheat_abs_bedonly() { _lcd_preheat(0, 0, preheatBedTemp2, preheatFanSpeed2); }
void lcd_preheat_pla_bedonly() { _lcd_preheat(0, 0, lcd_preheat_bed_temp[0], lcd_preheat_fan_speed[0]); }
void lcd_preheat_abs_bedonly() { _lcd_preheat(0, 0, lcd_preheat_bed_temp[1], lcd_preheat_fan_speed[1]); }
#endif
#if TEMP_SENSOR_0 != 0 && (TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_3 != 0 || TEMP_SENSOR_BED != 0)
@ -1092,12 +1064,12 @@ void kill_screen(const char* lcd_msg) {
}
static bool debounce_click = false;
if (LCD_CLICKED) {
if (lcd_clicked) {
if (!debounce_click) {
debounce_click = true; // ignore multiple "clicks" in a row
mbl.set_zigzag_z(_lcd_level_bed_position++, current_position[Z_AXIS]);
if (_lcd_level_bed_position == (MESH_NUM_X_POINTS) * (MESH_NUM_Y_POINTS)) {
lcd_goto_screen(_lcd_level_bed_done, true);
lcd_goto_screen(_lcd_level_bed_done);
current_position[Z_AXIS] = MESH_HOME_SEARCH_Z + Z_HOMING_HEIGHT;
line_to_current(Z_AXIS);
@ -1113,7 +1085,7 @@ void kill_screen(const char* lcd_msg) {
#endif
}
else {
lcd_goto_screen(_lcd_level_goto_next_point, true);
lcd_goto_screen(_lcd_level_goto_next_point);
}
}
}
@ -1171,7 +1143,7 @@ void kill_screen(const char* lcd_msg) {
*/
static void _lcd_level_bed_homing_done() {
if (lcdDrawUpdate) lcd_implementation_drawedit(PSTR(MSG_LEVEL_BED_WAITING));
if (LCD_CLICKED) {
if (lcd_clicked) {
_lcd_level_bed_position = 0;
current_position[Z_AXIS] = MESH_HOME_SEARCH_Z
#if Z_HOME_DIR > 0
@ -1179,7 +1151,7 @@ void kill_screen(const char* lcd_msg) {
#endif
;
planner.set_position_mm(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
lcd_goto_screen(_lcd_level_goto_next_point, true);
lcd_goto_screen(_lcd_level_goto_next_point);
}
}
@ -1385,7 +1357,7 @@ void kill_screen(const char* lcd_msg) {
*/
static void _lcd_move_xyz(const char* name, AxisEnum axis) {
if (LCD_CLICKED) { lcd_goto_previous_menu(true); return; }
if (lcd_clicked) { return lcd_goto_previous_menu(true); }
ENCODER_DIRECTION_NORMAL();
if (encoderPosition) {
refresh_cmd_timeout();
@ -1425,7 +1397,7 @@ void kill_screen(const char* lcd_msg) {
int8_t eindex=-1
#endif
) {
if (LCD_CLICKED) { lcd_goto_previous_menu(true); return; }
if (lcd_clicked) { return lcd_goto_previous_menu(true); }
ENCODER_DIRECTION_NORMAL();
if (encoderPosition) {
current_position[E_AXIS] += float((int32_t)encoderPosition) * move_menu_scale;
@ -1793,20 +1765,15 @@ void kill_screen(const char* lcd_msg) {
END_MENU();
}
/**
*
* "Temperature" > "Preheat PLA conf" submenu
*
*/
static void lcd_control_temperature_preheat_pla_settings_menu() {
static void _lcd_control_temperature_preheat_settings_menu(uint8_t material) {
START_MENU();
MENU_BACK(MSG_TEMPERATURE);
MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &preheatFanSpeed1, 0, 255);
MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &lcd_preheat_fan_speed[material], 0, 255);
#if TEMP_SENSOR_0 != 0
MENU_ITEM_EDIT(int3, MSG_NOZZLE, &preheatHotendTemp1, HEATER_0_MINTEMP, HEATER_0_MAXTEMP - 15);
MENU_ITEM_EDIT(int3, MSG_NOZZLE, &lcd_preheat_hotend_temp[material], HEATER_0_MINTEMP, HEATER_0_MAXTEMP - 15);
#endif
#if TEMP_SENSOR_BED != 0
MENU_ITEM_EDIT(int3, MSG_BED, &preheatBedTemp1, BED_MINTEMP, BED_MAXTEMP - 15);
MENU_ITEM_EDIT(int3, MSG_BED, &lcd_preheat_bed_temp[material], BED_MINTEMP, BED_MAXTEMP - 15);
#endif
#if ENABLED(EEPROM_SETTINGS)
MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings);
@ -1814,26 +1781,19 @@ void kill_screen(const char* lcd_msg) {
END_MENU();
}
/**
*
* "Temperature" > "Preheat PLA conf" submenu
*
*/
static void lcd_control_temperature_preheat_pla_settings_menu() { _lcd_control_temperature_preheat_settings_menu(0); }
/**
*
* "Temperature" > "Preheat ABS conf" submenu
*
*/
static void lcd_control_temperature_preheat_abs_settings_menu() {
START_MENU();
MENU_BACK(MSG_TEMPERATURE);
MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &preheatFanSpeed2, 0, 255);
#if TEMP_SENSOR_0 != 0
MENU_ITEM_EDIT(int3, MSG_NOZZLE, &preheatHotendTemp2, HEATER_0_MINTEMP, HEATER_0_MAXTEMP - 15);
#endif
#if TEMP_SENSOR_BED != 0
MENU_ITEM_EDIT(int3, MSG_BED, &preheatBedTemp2, BED_MINTEMP, BED_MAXTEMP - 15);
#endif
#if ENABLED(EEPROM_SETTINGS)
MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings);
#endif
END_MENU();
}
static void lcd_control_temperature_preheat_abs_settings_menu() { _lcd_control_temperature_preheat_settings_menu(1); }
static void _reset_acceleration_rates() { planner.reset_acceleration_rates(); }
static void _planner_refresh_positioning() { planner.refresh_positioning(); }
@ -1924,7 +1884,7 @@ void kill_screen(const char* lcd_msg) {
*/
#if HAS_LCD_CONTRAST
static void lcd_set_contrast() {
if (LCD_CLICKED) { lcd_goto_previous_menu(true); return; }
if (lcd_clicked) { return lcd_goto_previous_menu(true); }
ENCODER_DIRECTION_NORMAL();
if (encoderPosition) {
set_lcd_contrast(lcd_contrast + encoderPosition);
@ -1991,7 +1951,7 @@ void kill_screen(const char* lcd_msg) {
*/
void lcd_sdcard_menu() {
ENCODER_DIRECTION_MENUS();
if (lcdDrawUpdate == 0 && LCD_CLICKED == 0) return; // nothing to do (so don't thrash the SD card)
if (!lcdDrawUpdate && !lcd_clicked) return; // nothing to do (so don't thrash the SD card)
uint16_t fileCnt = card.getnrfilenames();
START_MENU();
MENU_BACK(MSG_MAIN);
@ -2037,7 +1997,7 @@ void kill_screen(const char* lcd_msg) {
*
*/
static void lcd_info_stats_menu() {
if (LCD_CLICKED) { lcd_goto_previous_menu(true); return; }
if (lcd_clicked) { return lcd_goto_previous_menu(true); }
char buffer[21];
printStatistics stats = print_job_timer.getStats();
@ -2071,7 +2031,7 @@ void kill_screen(const char* lcd_msg) {
*
*/
static void lcd_info_thermistors_menu() {
if (LCD_CLICKED) { lcd_goto_previous_menu(true); return; }
if (lcd_clicked) { return lcd_goto_previous_menu(true); }
START_SCREEN();
#define THERMISTOR_ID TEMP_SENSOR_0
#include "thermistornames.h"
@ -2123,7 +2083,7 @@ void kill_screen(const char* lcd_msg) {
*
*/
static void lcd_info_board_menu() {
if (LCD_CLICKED) { lcd_goto_previous_menu(true); return; }
if (lcd_clicked) { return lcd_goto_previous_menu(true); }
START_SCREEN();
STATIC_ITEM(BOARD_NAME, true, true); // MyPrinterController
STATIC_ITEM(MSG_INFO_BAUDRATE ": " STRINGIFY(BAUDRATE), true); // Baud: 250000
@ -2144,7 +2104,7 @@ void kill_screen(const char* lcd_msg) {
*
*/
static void lcd_info_printer_menu() {
if (LCD_CLICKED) { lcd_goto_previous_menu(true); return; }
if (lcd_clicked) { return lcd_goto_previous_menu(true); }
START_SCREEN();
STATIC_ITEM(MSG_MARLIN, true, true); // Marlin
STATIC_ITEM(SHORT_BUILD_VERSION, true); // x.x.x-Branch
@ -2334,16 +2294,15 @@ void kill_screen(const char* lcd_msg) {
#define menu_edit_type(_type, _name, _strFunc, scale) \
bool _menu_edit_ ## _name () { \
ENCODER_DIRECTION_NORMAL(); \
bool isClicked = LCD_CLICKED; \
if ((int32_t)encoderPosition < 0) encoderPosition = 0; \
if ((int32_t)encoderPosition > maxEditValue) encoderPosition = maxEditValue; \
if (lcdDrawUpdate) \
lcd_implementation_drawedit(editLabel, _strFunc(((_type)((int32_t)encoderPosition + minEditValue)) / scale)); \
if (isClicked) { \
if (lcd_clicked) { \
*((_type*)editValue) = ((_type)((int32_t)encoderPosition + minEditValue)) / scale; \
lcd_goto_previous_menu(true); \
} \
return isClicked; \
return lcd_clicked; \
} \
void menu_edit_ ## _name () { _menu_edit_ ## _name(); } \
void menu_edit_callback_ ## _name () { if (_menu_edit_ ## _name ()) (*callbackFunc)(); } \
@ -2614,9 +2573,20 @@ void lcd_update() {
#if ENABLED(ULTIPANEL)
static millis_t return_to_status_ms = 0;
manage_manual_move();
#endif
lcd_buttons_update();
lcd_buttons_update();
// If the action button is pressed...
if (LCD_CLICKED) {
if (!wait_for_unclick) { // If not waiting for a debounce release:
wait_for_unclick = true; // Set debounce flag to ignore continous clicks
lcd_clicked = !wait_for_user; // Keep the click if not waiting for a user-click
wait_for_user = false; // Any click clears wait for user
lcd_quick_feedback(); // Always make a click sound
}
}
else wait_for_unclick = false;
#endif
#if ENABLED(SDSUPPORT) && PIN_EXISTS(SD_DETECT)
@ -2691,7 +2661,7 @@ void lcd_update() {
#endif // REPRAPWORLD_KEYPAD
bool encoderPastThreshold = (abs(encoderDiff) >= ENCODER_PULSES_PER_STEP);
if (encoderPastThreshold || LCD_CLICKED) {
if (encoderPastThreshold || lcd_clicked) {
if (encoderPastThreshold) {
int32_t encoderMultiplier = 1;
@ -2757,7 +2727,7 @@ void lcd_update() {
}
#if ENABLED(ULTIPANEL)
#define CURRENTSCREEN() (*currentScreen)()
#define CURRENTSCREEN() (*currentScreen)(), lcd_clicked = false
#else
#define CURRENTSCREEN() lcd_status_screen()
#endif
@ -3020,8 +2990,6 @@ void lcd_reset_alert_level() { lcd_status_message_level = 0; }
#endif
}
bool lcd_clicked() { return LCD_CLICKED; }
#endif // ULTIPANEL
#endif // ULTRA_LCD

62
Marlin/ultralcd.h

@ -30,6 +30,8 @@
#define BUTTON_EXISTS(BN) (defined(BTN_## BN) && BTN_## BN >= 0)
#define BUTTON_PRESSED(BN) !READ(BTN_## BN)
extern int lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2], lcd_preheat_fan_speed[2];
int lcd_strlen(const char* s);
int lcd_strlen_P(const char* s);
void lcd_update();
@ -65,26 +67,31 @@
#define LCD_TIMEOUT_TO_STATUS 15000
#if ENABLED(ULTIPANEL)
#define BLEN_A 0
#define BLEN_B 1
// Encoder click is directly connected
#if BUTTON_EXISTS(ENC)
#define BLEN_C 2
#define EN_C (_BV(BLEN_C))
#endif
#define EN_A (_BV(BLEN_A))
#define EN_B (_BV(BLEN_B))
#define EN_C (_BV(BLEN_C))
extern volatile uint8_t buttons; //the last checked buttons in a bit array.
void lcd_buttons_update();
void lcd_quick_feedback(); // Audible feedback for a button click - could also be visual
bool lcd_clicked();
void lcd_ignore_click(bool b=true);
#if ENABLED(FILAMENT_CHANGE_FEATURE)
void lcd_filament_change_show_message(FilamentChangeMessage message);
#endif // FILAMENT_CHANGE_FEATURE
#else
FORCE_INLINE void lcd_buttons_update() {}
#endif
extern int preheatHotendTemp1;
extern int preheatBedTemp1;
extern int preheatFanSpeed1;
extern int preheatHotendTemp2;
extern int preheatBedTemp2;
extern int preheatFanSpeed2;
inline void lcd_buttons_update() {}
#endif
#if ENABLED(FILAMENT_LCD_DISPLAY)
extern millis_t previous_lcd_status_ms;
@ -92,19 +99,6 @@
bool lcd_blink();
#if ENABLED(ULTIPANEL)
#define BLEN_A 0
#define BLEN_B 1
// Encoder click is directly connected
#if BUTTON_EXISTS(ENC)
#define BLEN_C 2
#define EN_C (_BV(BLEN_C))
#endif
#define EN_A (_BV(BLEN_A))
#define EN_B (_BV(BLEN_B))
#define EN_C (_BV(BLEN_C))
#endif
#if ENABLED(REPRAPWORLD_KEYPAD) // is also ULTIPANEL and NEWPANEL
#define REPRAPWORLD_BTN_OFFSET 0 // bit offset into buttons for shift register values
@ -150,21 +144,23 @@
#define LCD_CLICKED ((buttons & EN_C) || (buttons_reprapworld_keypad & EN_REPRAPWORLD_KEYPAD_F1))
#elif ENABLED(NEWPANEL)
#define LCD_CLICKED (buttons & EN_C)
#else
#define LCD_CLICKED false
#endif
#else //no LCD
FORCE_INLINE void lcd_update() {}
FORCE_INLINE void lcd_init() {}
FORCE_INLINE bool lcd_hasstatus() { return false; }
FORCE_INLINE void lcd_setstatus(const char* message, const bool persist=false) {UNUSED(message); UNUSED(persist);}
FORCE_INLINE void lcd_setstatuspgm(const char* message, const uint8_t level=0) {UNUSED(message); UNUSED(level);}
FORCE_INLINE void lcd_buttons_update() {}
FORCE_INLINE void lcd_reset_alert_level() {}
FORCE_INLINE bool lcd_detected(void) { return true; }
inline void lcd_update() {}
inline void lcd_init() {}
inline bool lcd_hasstatus() { return false; }
inline void lcd_setstatus(const char* message, const bool persist=false) { UNUSED(message); UNUSED(persist); }
inline void lcd_setstatuspgm(const char* message, const uint8_t level=0) { UNUSED(message); UNUSED(level); }
inline void lcd_buttons_update() {}
inline void lcd_reset_alert_level() {}
inline bool lcd_detected(void) { return true; }
#define LCD_MESSAGEPGM(x) NOOP
#define LCD_ALERTMESSAGEPGM(x) NOOP
#endif //ULTRA_LCD
#endif // ULTRA_LCD
#endif //ULTRALCD_H
#endif // ULTRALCD_H

Loading…
Cancel
Save