diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 2c3cd38def..2e0a5b5c50 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -2784,6 +2784,10 @@ */ #define FASTER_GCODE_PARSER +#if ENABLED(FASTER_GCODE_PARSER) + //#define GCODE_QUOTED_STRINGS // Support for quoted string parameters +#endif + /** * CNC G-code options * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. diff --git a/Marlin/src/gcode/host/M115.cpp b/Marlin/src/gcode/host/M115.cpp index 9123bc6e62..bce0c89184 100644 --- a/Marlin/src/gcode/host/M115.cpp +++ b/Marlin/src/gcode/host/M115.cpp @@ -33,7 +33,9 @@ #endif /** - * M115: Capabilities string + * M115: Capabilities string and extended capabilities report + * If a capability is not reported, hosts should assume + * the capability is not present. */ void GcodeSuite::M115() { @@ -41,6 +43,16 @@ void GcodeSuite::M115() { #if ENABLED(EXTENDED_CAPABILITIES_REPORT) + // PAREN_COMMENTS + #if ENABLED(PAREN_COMMENTS) + cap_line(PSTR("PAREN_COMMENTS"), true); + #endif + + // QUOTED_STRINGS + #if ENABLED(GCODE_QUOTED_STRINGS) + cap_line(PSTR("QUOTED_STRINGS"), true); + #endif + // SERIAL_XON_XOFF cap_line(PSTR("SERIAL_XON_XOFF") #if ENABLED(SERIAL_XON_XOFF) @@ -171,6 +183,5 @@ void GcodeSuite::M115() { #endif ); - #endif // EXTENDED_CAPABILITIES_REPORT } diff --git a/Marlin/src/gcode/parser.cpp b/Marlin/src/gcode/parser.cpp index 75f88df76b..8218ee53d8 100644 --- a/Marlin/src/gcode/parser.cpp +++ b/Marlin/src/gcode/parser.cpp @@ -92,6 +92,26 @@ void GCodeParser::reset() { #endif } +#if ENABLED(GCODE_QUOTED_STRINGS) + + // Pass the address after the first quote (if any) + char* GCodeParser::unescape_string(char* &src) { + if (*src == '"') ++src; // Skip the leading quote + char * const out = src; // Start of the string + char *dst = src; // Prepare to unescape and terminate + for (;;) { + char c = *src++; // Get the next char + switch (c) { + case '\\': c = *src++; break; // Get the escaped char + case '"' : c = '\0'; break; // Convert bare quote to nul + } + if (!(*dst++ = c)) break; // Copy and break on nul + } + return out; + } + +#endif + // Populate all fields by parsing a single line of GCode // 58 bytes of SRAM are used to speed up seen/value void GCodeParser::parse(char *p) { @@ -229,17 +249,12 @@ void GCodeParser::parse(char *p) { #if ENABLED(EXPECTED_PRINTER_CHECK) case 16: #endif - case 23: case 28: case 30: case 117: case 118: case 928: string_arg = p; return; - default: break; - } -/* - #if ENABLED(CANCEL_OBJECTS) - if (letter == 'O') switch (codenum) { - case 1: string_arg = p; return; + case 23: case 28: case 30: case 117: case 118: case 928: + string_arg = unescape_string(p); + return; default: break; } - #endif -*/ + #if ENABLED(DEBUG_GCODE_PARSER) const bool debug = codenum == 800; #endif @@ -252,21 +267,31 @@ void GCodeParser::parse(char *p) { * This allows M0/M1 with expire time to work: "M0 S5 You Win!" * For 'M118' you must use 'E1' and 'A1' rather than just 'E' or 'A' */ + #if ENABLED(GCODE_QUOTED_STRINGS) + bool quoted_string_arg = false; + #endif string_arg = nullptr; - while (const char code = *p++) { // Get the next parameter. A NUL ends the loop + while (const char param = *p++) { // Get the next parameter. A NUL ends the loop // Special handling for M32 [P] !/path/to/file.g# // The path must be the last parameter - if (code == '!' && letter == 'M' && codenum == 32) { + if (param == '!' && letter == 'M' && codenum == 32) { string_arg = p; // Name starts after '!' char * const lb = strchr(p, '#'); // Already seen '#' as SD char (to pause buffering) if (lb) *lb = '\0'; // Safe to mark the end of the filename return; } + #if ENABLED(GCODE_QUOTED_STRINGS) + if (!quoted_string_arg && param == '"') { + quoted_string_arg = true; + string_arg = unescape_string(p); + } + #endif + // Arguments MUST be uppercase for fast GCode parsing #if ENABLED(FASTER_GCODE_PARSER) - #define PARAM_TEST WITHIN(code, 'A', 'Z') + #define PARAM_TEST WITHIN(param, 'A', 'Z') #else #define PARAM_TEST true #endif @@ -275,16 +300,22 @@ void GCodeParser::parse(char *p) { while (*p == ' ') p++; // Skip spaces between parameters & values - const bool has_num = valid_float(p); + #if ENABLED(GCODE_QUOTED_STRINGS) + const bool is_str = (*p == '"'), has_val = is_str || valid_float(p); + char * const valptr = has_val ? is_str ? unescape_string(p) : p : nullptr; + #else + const bool has_val = valid_float(p); + char * const valptr = has_val ? p : nullptr; + #endif #if ENABLED(DEBUG_GCODE_PARSER) if (debug) { - SERIAL_ECHOPAIR("Got letter ", code, " at index ", (int)(p - command_ptr - 1)); - if (has_num) SERIAL_ECHOPGM(" (has_num)"); + SERIAL_ECHOPAIR("Got param ", param, " at index ", (int)(p - command_ptr - 1)); + if (has_val) SERIAL_ECHOPGM(" (has_val)"); } #endif - if (!has_num && !string_arg) { // No value? First time, keep as string_arg + if (!has_val && !string_arg) { // No value? First time, keep as string_arg string_arg = p - 1; #if ENABLED(DEBUG_GCODE_PARSER) if (debug) SERIAL_ECHOPAIR(" string_arg: ", hex_address((void*)string_arg)); // DEBUG @@ -296,7 +327,7 @@ void GCodeParser::parse(char *p) { #endif #if ENABLED(FASTER_GCODE_PARSER) - set(code, has_num ? p : nullptr); // Set parameter exists and pointer (nullptr for no number) + set(param, valptr); // Set parameter exists and pointer (nullptr for no value) #endif } else if (!string_arg) { // Not A-Z? First time, keep as the string_arg @@ -359,7 +390,7 @@ void GCodeParser::unknown_command_warning() { if (seen(c)) { SERIAL_ECHOPAIR("Code '", c); SERIAL_ECHOPGM("':"); if (has_value()) { - SERIAL_ECHOPAIR( + SERIAL_ECHOLNPAIR( "\n float: ", value_float(), "\n long: ", value_long(), "\n ulong: ", value_ulong(), @@ -374,8 +405,7 @@ void GCodeParser::unknown_command_warning() { ); } else - SERIAL_ECHOPGM(" (no value)"); - SERIAL_ECHOLNPGM("\n"); + SERIAL_ECHOLNPGM(" (no value)"); } } } diff --git a/Marlin/src/gcode/parser.h b/Marlin/src/gcode/parser.h index cce8abe5fd..08f8613c17 100644 --- a/Marlin/src/gcode/parser.h +++ b/Marlin/src/gcode/parser.h @@ -208,6 +208,12 @@ public: return SEEN_TEST('X') || SEEN_TEST('Y') || SEEN_TEST('Z') || SEEN_TEST('E'); } + #if ENABLED(GCODE_QUOTED_STRINGS) + static char* unescape_string(char* &src); + #else + FORCE_INLINE static char* unescape_string(char* &src) { return src; } + #endif + // Populate all fields by parsing a single line of GCode // This uses 54 bytes of SRAM to speed up seen/value static void parse(char * p); @@ -223,6 +229,9 @@ public: // Seen a parameter with a value static inline bool seenval(const char c) { return seen(c) && has_value(); } + // Float removes 'E' to prevent scientific notation interpretation + static inline char* value_string() { return value_ptr; } + // Float removes 'E' to prevent scientific notation interpretation static inline float value_float() { if (value_ptr) { @@ -369,6 +378,7 @@ public: void unknown_command_warning(); // Provide simple value accessors with default option + static inline char* stringval(const char c, char * const dval=nullptr) { return seenval(c) ? value_string() : dval; } static inline float floatval(const char c, const float dval=0.0) { return seenval(c) ? value_float() : dval; } static inline bool boolval(const char c, const bool dval=false) { return seenval(c) ? value_bool() : (seen(c) ? true : dval); } static inline uint8_t byteval(const char c, const uint8_t dval=0) { return seenval(c) ? value_byte() : dval; } diff --git a/Marlin/src/gcode/queue.cpp b/Marlin/src/gcode/queue.cpp index 5d317b6ca5..b83a211967 100644 --- a/Marlin/src/gcode/queue.cpp +++ b/Marlin/src/gcode/queue.cpp @@ -309,6 +309,66 @@ FORCE_INLINE bool is_M29(const char * const cmd) { // matches "M29" & "M29 ", b return m29 && !NUMERIC(m29[3]); } +#define PS_NORMAL 0 +#define PS_EOL 1 +#define PS_QUOTED 2 +#define PS_PAREN 3 +#define PS_ESC 4 + +inline void process_stream_char(const char c, uint8_t &sis, char (&buff)[MAX_CMD_SIZE], int &ind) { + + if (sis == PS_EOL) return; // EOL comment or overflow + + #if ENABLED(PAREN_COMMENTS) + else if (sis == PS_PAREN) { // Inline comment + if (c == ')') sis = PS_NORMAL; + return; + } + #endif + + else if (sis >= PS_ESC) // End escaped char + sis -= PS_ESC; + + else if (c == '\\') { // Start escaped char + sis += PS_ESC; + if (sis == PS_ESC) return; // Keep if quoting + } + + #if ENABLED(GCODE_QUOTED_STRINGS) + + else if (sis == PS_QUOTED) { + if (c == '"') sis = PS_NORMAL; // End quoted string + } + else if (c == '"') // Start quoted string + sis = PS_QUOTED; + + #endif + + else if (c == ';') { // Start end-of-line comment + sis = PS_EOL; + return; + } + + #if ENABLED(PAREN_COMMENTS) + else if (c == '(') { // Start inline comment + sis = PS_PAREN; + return; + } + #endif + + buff[ind++] = c; + if (ind >= MAX_CMD_SIZE - 1) + sis = PS_EOL; // Skip the rest on overflow +} + +inline bool process_line_done(uint8_t &sis, char (&buff)[MAX_CMD_SIZE], int &ind) { + sis = PS_NORMAL; + if (!ind) { thermalManager.manage_heater(); return true; } + buff[ind] = 0; + ind = 0; + return false; +} + /** * Get all commands waiting on the serial port and queue them. * Exit when the buffer is full or when no more characters are @@ -316,11 +376,8 @@ FORCE_INLINE bool is_M29(const char * const cmd) { // matches "M29" & "M29 ", b */ void GCodeQueue::get_serial_commands() { static char serial_line_buffer[NUM_SERIAL][MAX_CMD_SIZE]; - static bool serial_comment_mode[NUM_SERIAL] = { false } - #if ENABLED(PAREN_COMMENTS) - , serial_comment_paren_mode[NUM_SERIAL] = { false } - #endif - ; + + static uint8_t serial_input_state[NUM_SERIAL] = { 0 }; #if ENABLED(BINARY_FILE_TRANSFER) if (card.flag.binary_mode) { @@ -350,27 +407,15 @@ void GCodeQueue::get_serial_commands() { */ while (length < BUFSIZE && serial_data_available()) { for (uint8_t i = 0; i < NUM_SERIAL; ++i) { - int c; - if ((c = read_serial(i)) < 0) continue; - char serial_char = c; + const int c = read_serial(i); + if (c < 0) continue; - /** - * If the character ends the line - */ - if (serial_char == '\n' || serial_char == '\r') { - - // Start with comment mode off - serial_comment_mode[i] = false; - #if ENABLED(PAREN_COMMENTS) - serial_comment_paren_mode[i] = false; - #endif + const char serial_char = c; - // Skip empty lines and comments - if (!serial_count[i]) { thermalManager.manage_heater(); continue; } + if (serial_char == '\n' || serial_char == '\r') { - serial_line_buffer[i][serial_count[i]] = 0; // Terminate string - serial_count[i] = 0; // Reset buffer + process_line_done(serial_input_state[i], serial_line_buffer[i], serial_count[i]); char* command = serial_line_buffer[i]; @@ -409,16 +454,17 @@ void GCodeQueue::get_serial_commands() { return gcode_line_error(PSTR(MSG_ERR_NO_CHECKSUM), i); #endif - // Movement commands alert when stopped + // + // Movement commands give an alert when the machine is stopped + // + if (IsStopped()) { char* gpos = strchr(command, 'G'); if (gpos) { switch (strtol(gpos + 1, nullptr, 10)) { - case 0: - case 1: + case 0: case 1: #if ENABLED(ARC_SUPPORT) - case 2: - case 3: + case 2: case 3: #endif #if ENABLED(BEZIER_CURVE_SUPPORT) case 5: @@ -453,31 +499,9 @@ void GCodeQueue::get_serial_commands() { #endif ); } - else if (serial_count[i] >= MAX_CMD_SIZE - 1) { - // Keep fetching, but ignore normal characters beyond the max length - // The command will be injected when EOL is reached - } - else if (serial_char == '\\') { // Handle escapes - // if we have one more character, copy it over - if ((c = read_serial(i)) >= 0 && !serial_comment_mode[i] - #if ENABLED(PAREN_COMMENTS) - && !serial_comment_paren_mode[i] - #endif - ) - serial_line_buffer[i][serial_count[i]++] = (char)c; - } - else { // it's not a newline, carriage return or escape char - if (serial_char == ';') serial_comment_mode[i] = true; - #if ENABLED(PAREN_COMMENTS) - else if (serial_char == '(') serial_comment_paren_mode[i] = true; - else if (serial_char == ')') serial_comment_paren_mode[i] = false; - #endif - else if (!serial_comment_mode[i] - #if ENABLED(PAREN_COMMENTS) - && ! serial_comment_paren_mode[i] - #endif - ) serial_line_buffer[i][serial_count[i]++] = serial_char; - } + else + process_stream_char(serial_char, serial_input_state[i], serial_line_buffer[i], serial_count[i]); + } // for NUM_SERIAL } // queue has space, serial has data } @@ -490,21 +514,17 @@ void GCodeQueue::get_serial_commands() { * can also interrupt buffering. */ inline void GCodeQueue::get_sdcard_commands() { - static bool sd_comment_mode = false - #if ENABLED(PAREN_COMMENTS) - , sd_comment_paren_mode = false - #endif - ; + static uint8_t sd_input_state = PS_NORMAL; if (!IS_SD_PRINTING()) return; - uint16_t sd_count = 0; + int sd_count = 0; bool card_eof = card.eof(); while (length < BUFSIZE && !card_eof) { const int16_t n = card.get(); - char sd_char = (char)n; card_eof = card.eof(); - if (card_eof || n == -1 || sd_char == '\n' || sd_char == '\r') { + const char sd_char = (char)n; + if (card_eof || n < 0 || sd_char == '\n' || sd_char == '\r') { if (card_eof) { card.printingHasFinished(); @@ -527,19 +547,10 @@ void GCodeQueue::get_serial_commands() { #endif // PRINTER_EVENT_LEDS } } - else if (n == -1) + else if (n < 0) SERIAL_ERROR_MSG(MSG_SD_ERR_READ); - sd_comment_mode = false; // for new command - #if ENABLED(PAREN_COMMENTS) - sd_comment_paren_mode = false; - #endif - - // Skip empty lines and comments - if (!sd_count) { thermalManager.manage_heater(); continue; } - - command_buffer[index_w][sd_count] = '\0'; // terminate string - sd_count = 0; // clear sd line buffer + process_line_done(sd_input_state, command_buffer[index_w], sd_count); _commit_command(false); @@ -547,24 +558,9 @@ void GCodeQueue::get_serial_commands() { recovery.cmd_sdpos = card.getIndex(); // Prime for the next _commit_command #endif } - else if (sd_count >= MAX_CMD_SIZE - 1) { - /** - * Keep fetching, but ignore normal characters beyond the max length - * The command will be injected when EOL is reached - */ - } - else { - if (sd_char == ';') sd_comment_mode = true; - #if ENABLED(PAREN_COMMENTS) - else if (sd_char == '(') sd_comment_paren_mode = true; - else if (sd_char == ')') sd_comment_paren_mode = false; - #endif - else if (!sd_comment_mode - #if ENABLED(PAREN_COMMENTS) - && ! sd_comment_paren_mode - #endif - ) command_buffer[index_w][sd_count++] = sd_char; - } + else + process_stream_char(sd_char, sd_input_state, command_buffer[index_w], sd_count); + } } diff --git a/buildroot/share/tests/megaatmega1280-tests b/buildroot/share/tests/megaatmega1280-tests index 05e262f6e7..4e5ad25355 100644 --- a/buildroot/share/tests/megaatmega1280-tests +++ b/buildroot/share/tests/megaatmega1280-tests @@ -19,7 +19,7 @@ restore_configs opt_set LCD_LANGUAGE an opt_enable SPINDLE_FEATURE ULTIMAKERCONTROLLER LCD_BED_LEVELING \ MESH_BED_LEVELING ENABLE_LEVELING_FADE_HEIGHT MESH_G28_REST_ORIGIN \ - G26_MESH_VALIDATION MESH_EDIT_MENU + G26_MESH_VALIDATION MESH_EDIT_MENU GCODE_QUOTED_STRINGS exec_test $1 $2 "Spindle, MESH_BED_LEVELING, and LCD"