Scott Lahteine
7 years ago
committed by
GitHub
GitHub
55 changed files with 2183 additions and 436 deletions
@ -0,0 +1,442 @@ |
|||
/**
|
|||
* Marlin 3D Printer Firmware |
|||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|||
* |
|||
* Based on Sprinter and grbl. |
|||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm |
|||
* |
|||
* This program is free software: you can redistribute it and/or modify |
|||
* it under the terms of the GNU General Public License as published by |
|||
* the Free Software Foundation, either version 3 of the License, or |
|||
* (at your option) any later version. |
|||
* |
|||
* This program is distributed in the hope that it will be useful, |
|||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
|||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
|||
* GNU General Public License for more details. |
|||
* |
|||
* You should have received a copy of the GNU General Public License |
|||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
* |
|||
*/ |
|||
|
|||
/**
|
|||
* status_screen_DOGM.h |
|||
* |
|||
* Standard Status Screen for Graphical Display |
|||
*/ |
|||
|
|||
#ifndef _STATUS_SCREEN_DOGM_H_ |
|||
#define _STATUS_SCREEN_DOGM_H_ |
|||
|
|||
FORCE_INLINE void _draw_centered_temp(const int16_t temp, const uint8_t x, const uint8_t y) { |
|||
const char * const str = itostr3(temp); |
|||
u8g.setPrintPos(x - (str[0] != ' ' ? 0 : str[1] != ' ' ? 1 : 2) * DOG_CHAR_WIDTH / 2, y); |
|||
lcd_print(str); |
|||
lcd_printPGM(PSTR(LCD_STR_DEGREE " ")); |
|||
} |
|||
|
|||
#ifndef HEAT_INDICATOR_X |
|||
#define HEAT_INDICATOR_X 8 |
|||
#endif |
|||
|
|||
FORCE_INLINE void _draw_heater_status(const uint8_t x, const int8_t heater, const bool blink) { |
|||
#if !HEATER_IDLE_HANDLER |
|||
UNUSED(blink); |
|||
#endif |
|||
|
|||
#if HAS_TEMP_BED |
|||
const bool isBed = heater < 0; |
|||
#else |
|||
constexpr bool isBed = false; |
|||
#endif |
|||
|
|||
if (PAGE_UNDER(7)) { |
|||
#if HEATER_IDLE_HANDLER |
|||
const bool is_idle = (!isBed ? thermalManager.is_heater_idle(heater) : |
|||
#if HAS_TEMP_BED |
|||
thermalManager.is_bed_idle() |
|||
#else |
|||
false |
|||
#endif |
|||
); |
|||
|
|||
if (blink || !is_idle) |
|||
#endif |
|||
_draw_centered_temp((isBed ? thermalManager.degTargetBed() : thermalManager.degTargetHotend(heater)) + 0.5, x, 7); } |
|||
|
|||
if (PAGE_CONTAINS(21, 28)) |
|||
_draw_centered_temp((isBed ? thermalManager.degBed() : thermalManager.degHotend(heater)) + 0.5, x, 28); |
|||
|
|||
if (PAGE_CONTAINS(17, 20)) { |
|||
const uint8_t h = isBed ? 7 : HEAT_INDICATOR_X, |
|||
y = isBed ? 18 : 17; |
|||
if (isBed ? thermalManager.isHeatingBed() : thermalManager.isHeatingHotend(heater)) { |
|||
u8g.setColorIndex(0); // white on black
|
|||
u8g.drawBox(x + h, y, 2, 2); |
|||
u8g.setColorIndex(1); // black on white
|
|||
} |
|||
else { |
|||
u8g.drawBox(x + h, y, 2, 2); |
|||
} |
|||
} |
|||
} |
|||
|
|||
FORCE_INLINE void _draw_axis_label(const AxisEnum axis, const char* const pstr, const bool blink) { |
|||
if (blink) |
|||
lcd_printPGM(pstr); |
|||
else { |
|||
if (!axis_homed[axis]) |
|||
u8g.print('?'); |
|||
else { |
|||
#if DISABLED(HOME_AFTER_DEACTIVATE) && DISABLED(DISABLE_REDUCED_ACCURACY_WARNING) |
|||
if (!axis_known_position[axis]) |
|||
u8g.print(' '); |
|||
else |
|||
#endif |
|||
lcd_printPGM(pstr); |
|||
} |
|||
} |
|||
} |
|||
|
|||
inline void lcd_implementation_status_message(const bool blink) { |
|||
#if ENABLED(STATUS_MESSAGE_SCROLLING) |
|||
static bool last_blink = false; |
|||
const uint8_t slen = lcd_strlen(lcd_status_message); |
|||
const char *stat = lcd_status_message + status_scroll_pos; |
|||
if (slen <= LCD_WIDTH) |
|||
lcd_print_utf(stat); // The string isn't scrolling
|
|||
else { |
|||
if (status_scroll_pos <= slen - LCD_WIDTH) |
|||
lcd_print_utf(stat); // The string fills the screen
|
|||
else { |
|||
uint8_t chars = LCD_WIDTH; |
|||
if (status_scroll_pos < slen) { // First string still visible
|
|||
lcd_print_utf(stat); // The string leaves space
|
|||
chars -= slen - status_scroll_pos; // Amount of space left
|
|||
} |
|||
u8g.print('.'); // Always at 1+ spaces left, draw a dot
|
|||
if (--chars) { |
|||
if (status_scroll_pos < slen + 1) // Draw a second dot if there's space
|
|||
--chars, u8g.print('.'); |
|||
if (chars) lcd_print_utf(lcd_status_message, chars); // Print a second copy of the message
|
|||
} |
|||
} |
|||
if (last_blink != blink) { |
|||
last_blink = blink; |
|||
// Skip any non-printing bytes
|
|||
if (status_scroll_pos < slen) while (!PRINTABLE(lcd_status_message[status_scroll_pos])) status_scroll_pos++; |
|||
if (++status_scroll_pos >= slen + 2) status_scroll_pos = 0; |
|||
} |
|||
} |
|||
#else |
|||
UNUSED(blink); |
|||
lcd_print_utf(lcd_status_message); |
|||
#endif |
|||
} |
|||
|
|||
static void lcd_implementation_status_screen() { |
|||
|
|||
const bool blink = lcd_blink(); |
|||
|
|||
#if FAN_ANIM_FRAMES > 2 |
|||
static bool old_blink; |
|||
static uint8_t fan_frame; |
|||
if (old_blink != blink) { |
|||
old_blink = blink; |
|||
if (!fanSpeeds[0] || ++fan_frame >= FAN_ANIM_FRAMES) fan_frame = 0; |
|||
} |
|||
#endif |
|||
|
|||
// Status Menu Font
|
|||
lcd_setFont(FONT_STATUSMENU); |
|||
|
|||
//
|
|||
// Fan Animation
|
|||
//
|
|||
// Draws the whole heading image as a B/W bitmap rather than
|
|||
// drawing the elements separately.
|
|||
// This was done as an optimization, as it was slower to draw
|
|||
// multiple parts compared to a single bitmap.
|
|||
//
|
|||
// The bitmap:
|
|||
// - May be offset in X
|
|||
// - Includes all nozzle(s), bed(s), and the fan.
|
|||
//
|
|||
// TODO:
|
|||
//
|
|||
// - Only draw the whole header on the first
|
|||
// entry to the status screen. Nozzle, bed, and
|
|||
// fan outline bits don't change.
|
|||
//
|
|||
if (PAGE_UNDER(STATUS_SCREENHEIGHT + 1)) { |
|||
|
|||
u8g.drawBitmapP( |
|||
STATUS_SCREEN_X, STATUS_SCREEN_Y, |
|||
(STATUS_SCREENWIDTH + 7) / 8, STATUS_SCREENHEIGHT, |
|||
#if HAS_FAN0 |
|||
#if FAN_ANIM_FRAMES > 2 |
|||
fan_frame == 1 ? status_screen1_bmp : |
|||
fan_frame == 2 ? status_screen2_bmp : |
|||
#if FAN_ANIM_FRAMES > 3 |
|||
fan_frame == 3 ? status_screen3_bmp : |
|||
#endif |
|||
#else |
|||
blink && fanSpeeds[0] ? status_screen1_bmp : |
|||
#endif |
|||
#endif |
|||
status_screen0_bmp |
|||
); |
|||
|
|||
} |
|||
|
|||
//
|
|||
// Temperature Graphics and Info
|
|||
//
|
|||
|
|||
if (PAGE_UNDER(28)) { |
|||
// Extruders
|
|||
HOTEND_LOOP() _draw_heater_status(STATUS_SCREEN_HOTEND_TEXT_X(e), e, blink); |
|||
|
|||
// Heated bed
|
|||
#if HOTENDS < 4 && HAS_TEMP_BED |
|||
_draw_heater_status(STATUS_SCREEN_BED_TEXT_X, -1, blink); |
|||
#endif |
|||
|
|||
#if HAS_FAN0 |
|||
if (PAGE_CONTAINS(20, 27)) { |
|||
// Fan
|
|||
const int16_t per = ((fanSpeeds[0] + 1) * 100) / 256; |
|||
if (per) { |
|||
u8g.setPrintPos(STATUS_SCREEN_FAN_TEXT_X, STATUS_SCREEN_FAN_TEXT_Y); |
|||
lcd_print(itostr3(per)); |
|||
u8g.print('%'); |
|||
} |
|||
} |
|||
#endif |
|||
} |
|||
|
|||
#if ENABLED(SDSUPPORT) |
|||
//
|
|||
// SD Card Symbol
|
|||
//
|
|||
if (card.isFileOpen() && PAGE_CONTAINS(42 - (TALL_FONT_CORRECTION), 51 - (TALL_FONT_CORRECTION))) { |
|||
// Upper box
|
|||
u8g.drawBox(42, 42 - (TALL_FONT_CORRECTION), 8, 7); // 42-48 (or 41-47)
|
|||
// Right edge
|
|||
u8g.drawBox(50, 44 - (TALL_FONT_CORRECTION), 2, 5); // 44-48 (or 43-47)
|
|||
// Bottom hollow box
|
|||
u8g.drawFrame(42, 49 - (TALL_FONT_CORRECTION), 10, 4); // 49-52 (or 48-51)
|
|||
// Corner pixel
|
|||
u8g.drawPixel(50, 43 - (TALL_FONT_CORRECTION)); // 43 (or 42)
|
|||
} |
|||
#endif // SDSUPPORT
|
|||
|
|||
#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) |
|||
//
|
|||
// Progress bar frame
|
|||
//
|
|||
#define PROGRESS_BAR_X 54 |
|||
#define PROGRESS_BAR_WIDTH (LCD_PIXEL_WIDTH - PROGRESS_BAR_X) |
|||
|
|||
if (PAGE_CONTAINS(49, 52 - (TALL_FONT_CORRECTION))) // 49-52 (or 49-51)
|
|||
u8g.drawFrame( |
|||
PROGRESS_BAR_X, 49, |
|||
PROGRESS_BAR_WIDTH, 4 - (TALL_FONT_CORRECTION) |
|||
); |
|||
|
|||
#if DISABLED(LCD_SET_PROGRESS_MANUALLY) |
|||
const uint8_t progress_bar_percent = card.percentDone(); |
|||
#endif |
|||
|
|||
if (progress_bar_percent > 1) { |
|||
|
|||
//
|
|||
// Progress bar solid part
|
|||
//
|
|||
|
|||
if (PAGE_CONTAINS(50, 51 - (TALL_FONT_CORRECTION))) // 50-51 (or just 50)
|
|||
u8g.drawBox( |
|||
PROGRESS_BAR_X + 1, 50, |
|||
(uint16_t)((PROGRESS_BAR_WIDTH - 2) * progress_bar_percent * 0.01), 2 - (TALL_FONT_CORRECTION) |
|||
); |
|||
|
|||
//
|
|||
// SD Percent Complete
|
|||
//
|
|||
|
|||
#if ENABLED(DOGM_SD_PERCENT) |
|||
if (PAGE_CONTAINS(41, 48)) { |
|||
// Percent complete
|
|||
u8g.setPrintPos(55, 48); |
|||
u8g.print(itostr3(progress_bar_percent)); |
|||
u8g.print('%'); |
|||
} |
|||
#endif |
|||
} |
|||
|
|||
//
|
|||
// Elapsed Time
|
|||
//
|
|||
|
|||
#if DISABLED(DOGM_SD_PERCENT) |
|||
#define SD_DURATION_X (PROGRESS_BAR_X + (PROGRESS_BAR_WIDTH / 2) - len * (DOG_CHAR_WIDTH / 2)) |
|||
#else |
|||
#define SD_DURATION_X (LCD_PIXEL_WIDTH - len * DOG_CHAR_WIDTH) |
|||
#endif |
|||
|
|||
if (PAGE_CONTAINS(41, 48)) { |
|||
char buffer[10]; |
|||
duration_t elapsed = print_job_timer.duration(); |
|||
bool has_days = (elapsed.value >= 60*60*24L); |
|||
uint8_t len = elapsed.toDigital(buffer, has_days); |
|||
u8g.setPrintPos(SD_DURATION_X, 48); |
|||
lcd_print(buffer); |
|||
} |
|||
|
|||
#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
|
|||
|
|||
//
|
|||
// XYZ Coordinates
|
|||
//
|
|||
|
|||
#if ENABLED(USE_SMALL_INFOFONT) |
|||
#define INFO_FONT_HEIGHT 7 |
|||
#else |
|||
#define INFO_FONT_HEIGHT 8 |
|||
#endif |
|||
|
|||
#define XYZ_BASELINE (30 + INFO_FONT_HEIGHT) |
|||
|
|||
#define X_LABEL_POS 3 |
|||
#define X_VALUE_POS 11 |
|||
#define XYZ_SPACING 40 |
|||
|
|||
#if ENABLED(XYZ_HOLLOW_FRAME) |
|||
#define XYZ_FRAME_TOP 29 |
|||
#define XYZ_FRAME_HEIGHT INFO_FONT_HEIGHT + 3 |
|||
#else |
|||
#define XYZ_FRAME_TOP 30 |
|||
#define XYZ_FRAME_HEIGHT INFO_FONT_HEIGHT + 1 |
|||
#endif |
|||
|
|||
// Before homing the axis letters are blinking 'X' <-> '?'.
|
|||
// When axis is homed but axis_known_position is false the axis letters are blinking 'X' <-> ' '.
|
|||
// When everything is ok you see a constant 'X'.
|
|||
|
|||
static char xstring[5], ystring[5], zstring[7]; |
|||
#if ENABLED(FILAMENT_LCD_DISPLAY) |
|||
static char wstring[5], mstring[4]; |
|||
#endif |
|||
|
|||
// At the first page, regenerate the XYZ strings
|
|||
if (page.page == 0) { |
|||
strcpy(xstring, ftostr4sign(LOGICAL_X_POSITION(current_position[X_AXIS]))); |
|||
strcpy(ystring, ftostr4sign(LOGICAL_Y_POSITION(current_position[Y_AXIS]))); |
|||
strcpy(zstring, ftostr52sp(FIXFLOAT(LOGICAL_Z_POSITION(current_position[Z_AXIS])))); |
|||
#if ENABLED(FILAMENT_LCD_DISPLAY) |
|||
strcpy(wstring, ftostr12ns(filament_width_meas)); |
|||
strcpy(mstring, itostr3(100.0 * ( |
|||
parser.volumetric_enabled |
|||
? planner.volumetric_area_nominal / planner.volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM] |
|||
: planner.volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM] |
|||
) |
|||
)); |
|||
#endif |
|||
} |
|||
|
|||
if (PAGE_CONTAINS(XYZ_FRAME_TOP, XYZ_FRAME_TOP + XYZ_FRAME_HEIGHT - 1)) { |
|||
|
|||
#if ENABLED(XYZ_HOLLOW_FRAME) |
|||
u8g.drawFrame(0, XYZ_FRAME_TOP, LCD_PIXEL_WIDTH, XYZ_FRAME_HEIGHT); // 8: 29-40 7: 29-39
|
|||
#else |
|||
u8g.drawBox(0, XYZ_FRAME_TOP, LCD_PIXEL_WIDTH, XYZ_FRAME_HEIGHT); // 8: 30-39 7: 30-37
|
|||
#endif |
|||
|
|||
if (PAGE_CONTAINS(XYZ_BASELINE - (INFO_FONT_HEIGHT - 1), XYZ_BASELINE)) { |
|||
|
|||
#if DISABLED(XYZ_HOLLOW_FRAME) |
|||
u8g.setColorIndex(0); // white on black
|
|||
#endif |
|||
|
|||
u8g.setPrintPos(0 * XYZ_SPACING + X_LABEL_POS, XYZ_BASELINE); |
|||
_draw_axis_label(X_AXIS, PSTR(MSG_X), blink); |
|||
u8g.setPrintPos(0 * XYZ_SPACING + X_VALUE_POS, XYZ_BASELINE); |
|||
lcd_print(xstring); |
|||
|
|||
u8g.setPrintPos(1 * XYZ_SPACING + X_LABEL_POS, XYZ_BASELINE); |
|||
_draw_axis_label(Y_AXIS, PSTR(MSG_Y), blink); |
|||
u8g.setPrintPos(1 * XYZ_SPACING + X_VALUE_POS, XYZ_BASELINE); |
|||
lcd_print(ystring); |
|||
|
|||
u8g.setPrintPos(2 * XYZ_SPACING + X_LABEL_POS, XYZ_BASELINE); |
|||
_draw_axis_label(Z_AXIS, PSTR(MSG_Z), blink); |
|||
u8g.setPrintPos(2 * XYZ_SPACING + X_VALUE_POS, XYZ_BASELINE); |
|||
lcd_print(zstring); |
|||
|
|||
#if DISABLED(XYZ_HOLLOW_FRAME) |
|||
u8g.setColorIndex(1); // black on white
|
|||
#endif |
|||
} |
|||
} |
|||
|
|||
//
|
|||
// Feedrate
|
|||
//
|
|||
|
|||
if (PAGE_CONTAINS(51 - INFO_FONT_HEIGHT, 49)) { |
|||
lcd_setFont(FONT_MENU); |
|||
u8g.setPrintPos(3, 50); |
|||
lcd_print(LCD_STR_FEEDRATE[0]); |
|||
|
|||
lcd_setFont(FONT_STATUSMENU); |
|||
u8g.setPrintPos(12, 50); |
|||
lcd_print(itostr3(feedrate_percentage)); |
|||
u8g.print('%'); |
|||
|
|||
//
|
|||
// Filament sensor display if SD is disabled
|
|||
//
|
|||
#if ENABLED(FILAMENT_LCD_DISPLAY) && DISABLED(SDSUPPORT) |
|||
u8g.setPrintPos(56, 50); |
|||
lcd_print(wstring); |
|||
u8g.setPrintPos(102, 50); |
|||
lcd_print(mstring); |
|||
u8g.print('%'); |
|||
lcd_setFont(FONT_MENU); |
|||
u8g.setPrintPos(47, 50); |
|||
lcd_print(LCD_STR_FILAM_DIA); |
|||
u8g.setPrintPos(93, 50); |
|||
lcd_print(LCD_STR_FILAM_MUL); |
|||
#endif |
|||
} |
|||
|
|||
//
|
|||
// Status line
|
|||
//
|
|||
|
|||
#define STATUS_BASELINE (55 + INFO_FONT_HEIGHT) |
|||
|
|||
if (PAGE_CONTAINS(STATUS_BASELINE - (INFO_FONT_HEIGHT - 1), STATUS_BASELINE)) { |
|||
u8g.setPrintPos(0, STATUS_BASELINE); |
|||
|
|||
#if ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT) |
|||
if (PENDING(millis(), previous_lcd_status_ms + 5000UL)) { //Display both Status message line and Filament display on the last line
|
|||
lcd_implementation_status_message(blink); |
|||
} |
|||
else { |
|||
lcd_printPGM(PSTR(LCD_STR_FILAM_DIA)); |
|||
u8g.print(':'); |
|||
lcd_print(wstring); |
|||
lcd_printPGM(PSTR(" " LCD_STR_FILAM_MUL)); |
|||
u8g.print(':'); |
|||
lcd_print(mstring); |
|||
u8g.print('%'); |
|||
} |
|||
#else |
|||
lcd_implementation_status_message(blink); |
|||
#endif |
|||
} |
|||
} |
|||
|
|||
#endif // _STATUS_SCREEN_DOGM_H_
|
|||
@ -0,0 +1,853 @@ |
|||
/**
|
|||
* Lightweight Status Screen for the RepRapDiscount Full |
|||
* Graphics Smart Controller (ST7920-based 128x64 LCD) |
|||
* |
|||
* (c) 2017 Aleph Objects, Inc. |
|||
* |
|||
* The code in this page is free software: you can |
|||
* redistribute it and/or modify it under the terms of the GNU |
|||
* General Public License (GNU GPL) as published by the Free Software |
|||
* Foundation, either version 3 of the License, or (at your option) |
|||
* any later version. The code is distributed WITHOUT ANY WARRANTY; |
|||
* without even the implied warranty of MERCHANTABILITY or FITNESS |
|||
* FOR A PARTICULAR PURPOSE. See the GNU GPL for more details. |
|||
* |
|||
*/ |
|||
|
|||
/**
|
|||
* Implementation of a Status Screen for the RepRapDiscount |
|||
* Full Graphics Smart Controller using native ST7920 commands |
|||
* instead of U8Glib. |
|||
* |
|||
* This alternative Status Screen makes use of the built-in character |
|||
* generation capabilities of the ST7920 to update the Status Screen |
|||
* with less SPI traffic and CPU use. In particular: |
|||
* |
|||
* - The fan and bed animations are handled using custom characters |
|||
* that are stored in CGRAM. This allows for the animation to be |
|||
* updated by writing a single character to the text-buffer (DDRAM). |
|||
* |
|||
* - All the information in the Status Screen is text that is written |
|||
* to DDRAM, so the work of generating the bitmaps is offloaded to |
|||
* the ST7920 rather than being render by U8Glib on the MCU. |
|||
* |
|||
* - The graphics buffer (GDRAM) is only used for static graphics |
|||
* elements (nozzle and feedrate bitmaps) and for the progress |
|||
* bar, so updates are sporadic. |
|||
*/ |
|||
|
|||
#include "status_screen_lite_ST7920_class.h" |
|||
|
|||
#include "../../libs/duration_t.h" |
|||
|
|||
#define BUFFER_WIDTH 256 |
|||
#define BUFFER_HEIGHT 32 |
|||
|
|||
#define DDRAM_LINE_1 0x00 |
|||
#define DDRAM_LINE_2 0x10 |
|||
#define DDRAM_LINE_3 0x08 |
|||
#define DDRAM_LINE_4 0x18 |
|||
|
|||
ST7920_Lite_Status_Screen::st7920_state_t ST7920_Lite_Status_Screen::current_bits; |
|||
|
|||
void ST7920_Lite_Status_Screen::cmd(const uint8_t cmd) { |
|||
if (!current_bits.synced || !current_bits.cmd) { |
|||
current_bits.synced = true; |
|||
current_bits.cmd = true; |
|||
sync_cmd(); |
|||
} |
|||
write_byte(cmd); |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::begin_data() { |
|||
if (!current_bits.synced || current_bits.cmd) { |
|||
current_bits.synced = true; |
|||
current_bits.cmd = false; |
|||
sync_dat(); |
|||
} |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::write_str(const char *str) { |
|||
while (*str) write_byte(*str++); |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::write_str(const char *str, uint8_t len) { |
|||
while (*str && len--) write_byte(*str++); |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::write_str_P(const char * const str) { |
|||
const char *p_str = (const char *)str; |
|||
while (char c = pgm_read_byte_near(p_str++)) write_byte(c); |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::write_str(progmem_str str) { |
|||
write_str_P((const char*)str); |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::write_number(const int16_t value, const uint8_t digits/*=3*/) { |
|||
char str[7]; |
|||
const char *fmt; |
|||
switch (digits) { |
|||
case 6: fmt = PSTR("%6d"); break; |
|||
case 5: fmt = PSTR("%5d"); break; |
|||
case 4: fmt = PSTR("%4d"); break; |
|||
case 3: fmt = PSTR("%3d"); break; |
|||
case 2: fmt = PSTR("%2d"); break; |
|||
case 1: fmt = PSTR("%1d"); break; |
|||
} |
|||
sprintf_P(str, fmt, value); |
|||
write_str(str); |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::display_status(const bool display_on, const bool cursor_on, const bool blink_on) { |
|||
extended_function_set(false); |
|||
cmd(0b00001000 | |
|||
(display_on ? 0b0100 : 0) | |
|||
(cursor_on ? 0b0010 : 0) | |
|||
(blink_on ? 0b0001 : 0) |
|||
); |
|||
} |
|||
|
|||
// Sets the extended and graphics bits simultaneously, regardless of
|
|||
// the current state. This is a helper function for extended_function_set()
|
|||
// and graphics()
|
|||
void ST7920_Lite_Status_Screen::_extended_function_set(const bool extended, const bool graphics) { |
|||
cmd( 0b00100000 | |
|||
(extended ? 0b00000100 : 0) | |
|||
(graphics ? 0b00000010 : 0) |
|||
); |
|||
current_bits.extended = extended; |
|||
current_bits.graphics = graphics; |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::extended_function_set(const bool extended) { |
|||
if (extended != current_bits.extended) |
|||
_extended_function_set(extended, current_bits.graphics); |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::graphics(const bool graphics) { |
|||
if (graphics != current_bits.graphics) |
|||
_extended_function_set(current_bits.extended, graphics); |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::entry_mode_select(const bool ac_increase, const bool shift) { |
|||
extended_function_set(false); |
|||
cmd(0b00000100 | |
|||
(ac_increase ? 0b00000010 : 0) | |
|||
(shift ? 0b00000001 : 0) |
|||
); |
|||
} |
|||
|
|||
// Sets the sa bit regardless of the current state. This is a helper
|
|||
// function for scroll_or_addr_select()
|
|||
void ST7920_Lite_Status_Screen::_scroll_or_addr_select(const bool sa) { |
|||
extended_function_set(true); |
|||
cmd(0b00100010 | |
|||
(sa ? 0b000001 : 0) |
|||
); |
|||
current_bits.sa = sa; |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::scroll_or_addr_select(const bool sa) { |
|||
if (sa != current_bits.sa) |
|||
_scroll_or_addr_select(sa); |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::set_ddram_address(const uint8_t addr) { |
|||
extended_function_set(false); |
|||
cmd(0b10000000 | (addr & 0b00111111)); |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::set_cgram_address(const uint8_t addr) { |
|||
extended_function_set(false); |
|||
cmd(0b01000000 | (addr & 0b00111111)); |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::set_gdram_address(const uint8_t x, const uint8_t y) { |
|||
extended_function_set(true); |
|||
cmd(0b10000000 | (y & 0b01111111)); |
|||
cmd(0b10000000 | (x & 0b00001111)); |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::clear() { |
|||
extended_function_set(false); |
|||
cmd(0x00000001); |
|||
delay(15); //delay for CGRAM clear
|
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::home() { |
|||
extended_function_set(false); |
|||
cmd(0x00000010); |
|||
} |
|||
|
|||
/* This fills the entire text buffer with spaces */ |
|||
void ST7920_Lite_Status_Screen::clear_ddram() { |
|||
set_ddram_address(DDRAM_LINE_1); |
|||
begin_data(); |
|||
for (uint8_t i = 64; i--;) write_byte(' '); |
|||
} |
|||
|
|||
/* This fills the entire graphics buffer with zeros */ |
|||
void ST7920_Lite_Status_Screen::clear_gdram() { |
|||
for (uint8_t y = 0; y < BUFFER_HEIGHT; y++) { |
|||
set_gdram_address(0, y); |
|||
begin_data(); |
|||
for (uint8_t i = (BUFFER_WIDTH) / 16; i--;) write_word(0); |
|||
} |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::load_cgram_icon(const uint16_t addr, const void *data) { |
|||
const uint16_t *p_word = (const uint16_t *)data; |
|||
set_cgram_address(addr); |
|||
begin_data(); |
|||
for (uint8_t i = 16; i--;) |
|||
write_word(pgm_read_word_near(p_word++)); |
|||
} |
|||
|
|||
/**
|
|||
* Draw an icon in GDRAM. Position specified in DDRAM |
|||
* coordinates. i.e., X from 1 to 8, Y from 1 to 4. |
|||
*/ |
|||
void ST7920_Lite_Status_Screen::draw_gdram_icon(uint8_t x, uint8_t y, const void *data) { |
|||
const uint16_t *p_word = (const uint16_t *)data; |
|||
if (y > 2) { // Handle display folding
|
|||
y -= 2; |
|||
x += 8; |
|||
} |
|||
--x; |
|||
--y; |
|||
for (int i = 0; i < 16; i++) { |
|||
set_gdram_address(x, i + y * 16); |
|||
begin_data(); |
|||
write_word(pgm_read_word_near(p_word++)); |
|||
} |
|||
} |
|||
|
|||
/************************** ICON DEFINITIONS *************************************/ |
|||
|
|||
#define CGRAM_ICON_1_ADDR 0x00 |
|||
#define CGRAM_ICON_2_ADDR 0x10 |
|||
#define CGRAM_ICON_3_ADDR 0x20 |
|||
#define CGRAM_ICON_4_ADDR 0x30 |
|||
|
|||
#define CGRAM_ICON_1_WORD 0x00 |
|||
#define CGRAM_ICON_2_WORD 0x02 |
|||
#define CGRAM_ICON_3_WORD 0x04 |
|||
#define CGRAM_ICON_4_WORD 0x06 |
|||
|
|||
const uint16_t nozzle_icon[] PROGMEM = { |
|||
0b0000000000000000, |
|||
0b0000000000000000, |
|||
0b0000111111110000, |
|||
0b0001111111111000, |
|||
0b0001111111111000, |
|||
0b0001111111111000, |
|||
0b0000111111110000, |
|||
0b0000111111110000, |
|||
0b0001111111111000, |
|||
0b0001111111111000, |
|||
0b0001111111111000, |
|||
0b0000011111100000, |
|||
0b0000001111000000, |
|||
0b0000000110000000, |
|||
0b0000000000000000, |
|||
0b0000000000000000 |
|||
}; |
|||
|
|||
const uint16_t bed_icon[] PROGMEM = { |
|||
0b0000000000000000, |
|||
0b0000000000000000, |
|||
0b0000000000000000, |
|||
0b0000000000000000, |
|||
0b0000000000000000, |
|||
0b0000000000000000, |
|||
0b0000000000000000, |
|||
0b0000000000000000, |
|||
0b0000000000000000, |
|||
0b0000000000000000, |
|||
0b0000000000000000, |
|||
0b0111111111111110, |
|||
0b0111111111111110, |
|||
0b0110000000000110, |
|||
0b0000000000000000, |
|||
0b0000000000000000 |
|||
}; |
|||
|
|||
const uint16_t heat1_icon[] PROGMEM = { |
|||
0b0000000000000000, |
|||
0b0010001000100000, |
|||
0b0001000100010000, |
|||
0b0000100010001000, |
|||
0b0000100010001000, |
|||
0b0001000100010000, |
|||
0b0010001000100000, |
|||
0b0010001000100000, |
|||
0b0001000100010000, |
|||
0b0000100010001000, |
|||
0b0000000000000000, |
|||
0b0000000000000000, |
|||
0b0000000000000000, |
|||
0b0000000000000000, |
|||
0b0000000000000000, |
|||
0b0000000000000000 |
|||
}; |
|||
|
|||
const uint16_t heat2_icon[] PROGMEM = { |
|||
0b0000000000000000, |
|||
0b0000100010001000, |
|||
0b0000100010001000, |
|||
0b0001000100010000, |
|||
0b0010001000100000, |
|||
0b0010001000100000, |
|||
0b0001000100010000, |
|||
0b0000100010001000, |
|||
0b0000100010001000, |
|||
0b0001000100010000, |
|||
0b0000000000000000, |
|||
0b0000000000000000, |
|||
0b0000000000000000, |
|||
0b0000000000000000, |
|||
0b0000000000000000, |
|||
0b0000000000000000 |
|||
}; |
|||
|
|||
const uint16_t fan1_icon[] PROGMEM = { |
|||
0b0000000000000000, |
|||
0b0111111111111110, |
|||
0b0111000000001110, |
|||
0b0110001111000110, |
|||
0b0100001111000010, |
|||
0b0100000110000010, |
|||
0b0101100000011010, |
|||
0b0101110110111010, |
|||
0b0101100000011010, |
|||
0b0100000110000010, |
|||
0b0100001111000010, |
|||
0b0110001111000110, |
|||
0b0111000000001110, |
|||
0b0111111111111110, |
|||
0b0000000000000000, |
|||
0b0000000000000000 |
|||
}; |
|||
|
|||
const uint16_t fan2_icon[] PROGMEM = { |
|||
0b0000000000000000, |
|||
0b0111111111111110, |
|||
0b0111000000001110, |
|||
0b0110010000100110, |
|||
0b0100111001110010, |
|||
0b0101111001111010, |
|||
0b0100110000110010, |
|||
0b0100000110000010, |
|||
0b0100110000110010, |
|||
0b0101111001111010, |
|||
0b0100111001110010, |
|||
0b0110010000100110, |
|||
0b0111000000001110, |
|||
0b0111111111111110, |
|||
0b0000000000000000, |
|||
0b0000000000000000 |
|||
}; |
|||
|
|||
const uint16_t feedrate_icon[] PROGMEM = { |
|||
0b0000000000000000, |
|||
0b0111111000000000, |
|||
0b0100000000000000, |
|||
0b0100000000000000, |
|||
0b0100000000000000, |
|||
0b0111111011111000, |
|||
0b0100000010000100, |
|||
0b0100000010000100, |
|||
0b0100000010000100, |
|||
0b0100000011111000, |
|||
0b0000000010001000, |
|||
0b0000000010000100, |
|||
0b0000000010000100, |
|||
0b0000000010000010, |
|||
0b0000000000000000, |
|||
0b0000000000000000 |
|||
}; |
|||
|
|||
/************************** MAIN SCREEN *************************************/ |
|||
|
|||
void ST7920_Lite_Status_Screen::draw_static_elements() { |
|||
scroll_or_addr_select(0); |
|||
|
|||
// Load the animated bed and fan icons
|
|||
load_cgram_icon(CGRAM_ICON_1_ADDR, heat1_icon); |
|||
load_cgram_icon(CGRAM_ICON_2_ADDR, heat2_icon); |
|||
load_cgram_icon(CGRAM_ICON_3_ADDR, fan1_icon); |
|||
load_cgram_icon(CGRAM_ICON_4_ADDR, fan2_icon); |
|||
|
|||
// Draw the static icons in GDRAM
|
|||
draw_gdram_icon(1, 1, nozzle_icon); |
|||
#if EXTRUDERS == 2 |
|||
draw_gdram_icon(1,2,nozzle_icon); |
|||
draw_gdram_icon(1,3,bed_icon); |
|||
#else |
|||
draw_gdram_icon(1,2,bed_icon); |
|||
#endif |
|||
draw_gdram_icon(6,2,feedrate_icon); |
|||
|
|||
// Draw the initial fan icon
|
|||
draw_fan_icon(false); |
|||
} |
|||
|
|||
/**
|
|||
* Although this is undocumented, the ST7920 allows the character |
|||
* data buffer (DDRAM) to be used in conjunction with the graphics |
|||
* bitmap buffer (CGRAM). The contents of the graphics buffer is |
|||
* XORed with the data from the character generator. This allows |
|||
* us to make the progess bar out of graphical data (the bar) and |
|||
* text data (the percentage). |
|||
*/ |
|||
void ST7920_Lite_Status_Screen::draw_progress_bar(const uint8_t value) { |
|||
#if EXTRUDERS == 1 |
|||
// If we have only one extruder, draw a long progress bar on the third line
|
|||
const uint8_t top = 1, // Top in pixels
|
|||
bottom = 13, // Bottom in pixels
|
|||
left = 8, // Left edge, in 16-bit words
|
|||
width = 5; // Width of progress bar, in 16-bit words
|
|||
#else |
|||
const uint8_t top = 16 + 1, // Top in pixels
|
|||
bottom = 16 + 13, // Bottom in pixels
|
|||
left = 5, // Left edge, in 16-bit words
|
|||
width = 3; // Width of progress bar, in 16-bit words
|
|||
#endif |
|||
const uint8_t char_pcnt = 100 / width; // How many percent does each 16-bit word represent?
|
|||
|
|||
// Draw the progress bar as a bitmap in CGRAM
|
|||
for (uint8_t y = top; y <= bottom; y++) { |
|||
set_gdram_address(left, y); |
|||
begin_data(); |
|||
for (uint8_t x = 0; x < width; x++) { |
|||
uint16_t gfx_word = 0x0000; |
|||
if ((x + 1) * char_pcnt <= value) |
|||
gfx_word = 0xFFFF; // Draw completely filled bytes
|
|||
else if ((x * char_pcnt) < value) |
|||
gfx_word = int(0x8000) >> (value % char_pcnt) * 16 / char_pcnt; // Draw partially filled bytes
|
|||
|
|||
// Draw the frame around the progress bar
|
|||
if (y == top || y == bottom) |
|||
gfx_word = 0xFFFF; // Draw top/bottom border
|
|||
else if (x == width - 1) |
|||
gfx_word |= 0x0001; // Draw right border
|
|||
else if (x == 0) |
|||
gfx_word |= 0x8000; // Draw left border
|
|||
write_word(gfx_word); |
|||
} |
|||
} |
|||
|
|||
// Draw the percentage as text in DDRAM
|
|||
set_ddram_address( |
|||
#if EXTRUDERS == 1 |
|||
DDRAM_LINE_3 + 1 |
|||
#else |
|||
DDRAM_LINE_2 + left |
|||
#endif |
|||
); |
|||
|
|||
begin_data(); |
|||
if (value > 9) { |
|||
write_number(value, 4); |
|||
write_str(F("% ")); |
|||
} |
|||
else { |
|||
write_number(value, 3); |
|||
write_str(F("% ")); |
|||
} |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::draw_fan_icon(const bool whichIcon) { |
|||
set_ddram_address(DDRAM_LINE_1 + 5); |
|||
begin_data(); |
|||
write_word(whichIcon ? CGRAM_ICON_3_WORD : CGRAM_ICON_4_WORD); |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::draw_heat_icon(const bool whichIcon, const bool heating) { |
|||
set_ddram_address( |
|||
#if EXTRUDERS == 1 |
|||
DDRAM_LINE_2 |
|||
#else |
|||
DDRAM_LINE_3 |
|||
#endif |
|||
); |
|||
begin_data(); |
|||
if (heating) |
|||
write_word(whichIcon ? CGRAM_ICON_1_WORD : CGRAM_ICON_2_WORD); |
|||
else { |
|||
write_byte(' '); |
|||
write_byte(' '); |
|||
} |
|||
} |
|||
|
|||
#define FAR(a,b) (((a > b) ? (a-b) : (b-a)) > 1) |
|||
|
|||
void ST7920_Lite_Status_Screen::draw_extruder_1_temp(const int16_t temp, const int16_t target) { |
|||
set_ddram_address(DDRAM_LINE_1 + 1); |
|||
begin_data(); |
|||
write_number(temp); |
|||
if (target && FAR(temp, target)) { |
|||
write_str(F("\x1A")); |
|||
write_number(target); |
|||
} |
|||
else |
|||
write_str(F(" ")); |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::draw_extruder_2_temp(const int16_t temp, const int16_t target) { |
|||
set_ddram_address(DDRAM_LINE_2 + 1); |
|||
begin_data(); |
|||
write_number(temp); |
|||
if (target && FAR(temp, target)) { |
|||
write_str(F("\x1A")); |
|||
write_number(target); |
|||
} |
|||
else |
|||
write_str(F(" ")); |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::draw_bed_temp(const int16_t temp, const int16_t target) { |
|||
set_ddram_address( |
|||
#if EXTRUDERS == 1 |
|||
DDRAM_LINE_2 + 1 |
|||
#else |
|||
DDRAM_LINE_3 + 1 |
|||
#endif |
|||
); |
|||
begin_data(); |
|||
write_number(temp); |
|||
if (target && FAR(temp, target)) { |
|||
write_str(F("\x1A")); |
|||
write_number(target); |
|||
} |
|||
else |
|||
write_str(F(" ")); |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::draw_fan_speed(const uint8_t value) { |
|||
set_ddram_address(DDRAM_LINE_1 + 6); |
|||
begin_data(); |
|||
write_number(value, 4); |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::draw_print_time(const uint32_t elapsed) { |
|||
const uint8_t hrs = elapsed / 3600, |
|||
min = (elapsed / 60) % 60; |
|||
char str[7]; |
|||
sprintf_P(str, hrs > 99 ? PSTR("%03d:%02d") : PSTR(" %02d:%02d"), hrs, min); |
|||
|
|||
set_ddram_address(DDRAM_LINE_3 + 5); |
|||
begin_data(); |
|||
write_str(str); |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::draw_feedrate_percentage(const uint8_t percentage) { |
|||
// We only have enough room for the feedrate when
|
|||
// we have one extruder
|
|||
#if EXTRUDERS == 1 |
|||
set_ddram_address(DDRAM_LINE_2 + 6); |
|||
begin_data(); |
|||
write_number(percentage, 4); |
|||
#endif |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::draw_status_message(const char *str) { |
|||
set_ddram_address(DDRAM_LINE_4); |
|||
begin_data(); |
|||
#if ENABLED(STATUS_MESSAGE_SCROLLING) |
|||
const uint8_t lcd_len = 16; |
|||
const uint8_t padding = 2; |
|||
uint8_t str_len = strlen(str); |
|||
|
|||
// Trim whitespace at the end of the str, as for some reason
|
|||
// messages like "Card Inserted" are padded with many spaces
|
|||
while (str_len > 0 && str[str_len - 1] == ' ') str_len--; |
|||
|
|||
if (str_len <= lcd_len) { |
|||
// It all fits on the LCD without scrolling
|
|||
write_str(str); |
|||
} |
|||
else { |
|||
// Print the message repeatedly until covering the LCD
|
|||
uint8_t c = status_scroll_pos; |
|||
for (uint8_t n = 0; n < lcd_len; n++) { |
|||
write_byte(c < str_len ? str[c] : ' '); |
|||
c++; |
|||
c %= str_len + padding; // Wrap around
|
|||
} |
|||
|
|||
// Scroll the message
|
|||
if (status_scroll_pos == str_len + padding) |
|||
status_scroll_pos = 0; |
|||
else |
|||
status_scroll_pos++; |
|||
} |
|||
#else |
|||
write_str(str, 16); |
|||
#endif |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::draw_position(const float x, const float y, const float z, bool position_known) { |
|||
char str[7]; |
|||
set_ddram_address(DDRAM_LINE_4); |
|||
begin_data(); |
|||
|
|||
// If position is unknown, flash the labels.
|
|||
const unsigned char alt_label = position_known ? 0 : (lcd_blink() ? ' ' : 0); |
|||
|
|||
dtostrf(x, -4, 0, str); |
|||
write_byte(alt_label ? alt_label : 'X'); |
|||
write_str(str, 4); |
|||
|
|||
dtostrf(y, -4, 0, str); |
|||
write_byte(alt_label ? alt_label : 'Y'); |
|||
write_str(str, 4); |
|||
|
|||
dtostrf(z, -5, 1, str); |
|||
write_byte(alt_label ? alt_label : 'Z'); |
|||
write_str(str, 5); |
|||
} |
|||
|
|||
bool ST7920_Lite_Status_Screen::indicators_changed() { |
|||
// We only add the target temperatures to the checksum
|
|||
// because the actual temps fluctuate so by updating
|
|||
// them only during blinks we gain a bit of stability.
|
|||
const bool blink = lcd_blink(); |
|||
const uint8_t feedrate_perc = feedrate_percentage; |
|||
const uint8_t fan_speed = ((fanSpeeds[0] + 1) * 100) / 256; |
|||
const float extruder_1_target = thermalManager.degTargetHotend(0); |
|||
#if EXTRUDERS == 2 |
|||
const float extruder_2_target = thermalManager.degTargetHotend(1); |
|||
#endif |
|||
const float bed_target = thermalManager.degTargetBed(); |
|||
|
|||
static uint8_t last_checksum = 0; |
|||
|
|||
const uint8_t checksum = |
|||
uint8_t(blink) ^ |
|||
uint8_t(feedrate_perc) ^ |
|||
uint8_t(fan_speed) ^ |
|||
uint8_t(extruder_1_target) ^ |
|||
#if EXTRUDERS == 2 |
|||
uint8_t(extruder_2_target) ^ |
|||
#endif |
|||
uint8_t(bed_target); |
|||
|
|||
if (last_checksum == checksum) return false; |
|||
|
|||
last_checksum = checksum; |
|||
return true; |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::update_indicators(const bool forceUpdate) { |
|||
if (forceUpdate || indicators_changed()) { |
|||
const bool blink = lcd_blink(); |
|||
const duration_t elapsed = print_job_timer.duration(); |
|||
const uint32_t seconds_elapsed = elapsed.value; |
|||
const uint8_t feedrate_perc = feedrate_percentage; |
|||
const uint8_t fan_speed = ((fanSpeeds[0] + 1) * 100) / 256; |
|||
const float extruder_1_temp = thermalManager.degHotend(0); |
|||
const float extruder_1_target = thermalManager.degTargetHotend(0); |
|||
#if EXTRUDERS == 2 |
|||
const float extruder_2_temp = thermalManager.degHotend(1); |
|||
const float extruder_2_target = thermalManager.degTargetHotend(1); |
|||
#endif |
|||
const float bed_temp = thermalManager.degBed(); |
|||
const float bed_target = thermalManager.degTargetBed(); |
|||
|
|||
draw_extruder_1_temp(extruder_1_temp, extruder_1_target); |
|||
#if EXTRUDERS == 2 |
|||
draw_extruder_2_temp(extruder_2_temp, extruder_2_target); |
|||
#endif |
|||
draw_bed_temp(bed_temp, bed_target); |
|||
draw_fan_speed(fan_speed); |
|||
draw_print_time(seconds_elapsed); |
|||
draw_feedrate_percentage(feedrate_perc); |
|||
|
|||
// Update the fan and bed animations
|
|||
if (fan_speed > 0) draw_fan_icon(blink); |
|||
if (bed_target > 0) |
|||
draw_heat_icon(blink, true); |
|||
else |
|||
draw_heat_icon(false, false); |
|||
} |
|||
} |
|||
|
|||
bool ST7920_Lite_Status_Screen::position_changed() { |
|||
const float x_pos = current_position[X_AXIS], |
|||
y_pos = current_position[Y_AXIS], |
|||
z_pos = current_position[Z_AXIS]; |
|||
const uint8_t checksum = uint8_t(x_pos) ^ uint8_t(y_pos) ^ uint8_t(z_pos); |
|||
|
|||
static uint8_t last_checksum = 0; |
|||
if (last_checksum == checksum) return false; |
|||
last_checksum = checksum; |
|||
return true; |
|||
} |
|||
|
|||
bool ST7920_Lite_Status_Screen::status_changed() { |
|||
uint8_t checksum = 0; |
|||
for (const char *p = lcd_status_message; *p; p++) checksum ^= *p; |
|||
|
|||
static uint8_t last_checksum = 0; |
|||
if (last_checksum == checksum) return false; |
|||
last_checksum = checksum; |
|||
return true; |
|||
} |
|||
|
|||
bool ST7920_Lite_Status_Screen::blink_changed() { |
|||
static uint8_t last_blink = 0; |
|||
const bool blink = lcd_blink(); |
|||
if (last_blink == blink) return false; |
|||
last_blink = blink; |
|||
return true; |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::update_status_or_position(bool forceUpdate) { |
|||
static uint8_t countdown = 0; |
|||
|
|||
/**
|
|||
* There is only enough room in the display for either the |
|||
* status message or the position, not both, so we choose |
|||
* one or another. Whenever the status message changes, |
|||
* we show it for a number of consecutive seconds, but |
|||
* then go back to showing the position as soon as the |
|||
* head moves, i.e: |
|||
* |
|||
* countdown > 1 -- Show status |
|||
* countdown = 1 -- Show status, until movement |
|||
* countdown = 0 -- Show position |
|||
*/ |
|||
if (forceUpdate || status_changed()) { |
|||
#if ENABLED(STATUS_MESSAGE_SCROLLING) |
|||
status_scroll_pos = 0; |
|||
#endif |
|||
#ifndef STATUS_EXPIRE_SECONDS |
|||
#define STATUS_EXPIRE_SECONDS 20 |
|||
#endif |
|||
countdown = lcd_strlen(lcd_status_message) ? STATUS_EXPIRE_SECONDS : 0; |
|||
draw_status_message(lcd_status_message); |
|||
blink_changed(); // Clear changed flag
|
|||
} |
|||
else if (countdown > 1 && blink_changed()) { |
|||
countdown--; |
|||
#if ENABLED(STATUS_MESSAGE_SCROLLING) |
|||
draw_status_message(lcd_status_message); |
|||
#endif |
|||
} |
|||
else if (countdown > 0 && blink_changed()) { |
|||
if (position_changed()) { |
|||
countdown--; |
|||
forceUpdate = true; |
|||
} |
|||
#if ENABLED(STATUS_MESSAGE_SCROLLING) |
|||
draw_status_message(lcd_status_message); |
|||
#endif |
|||
} |
|||
if (countdown == 0 && (forceUpdate || position_changed() || |
|||
#if DISABLED(DISABLE_REDUCED_ACCURACY_WARNING) |
|||
blink_changed() |
|||
#endif |
|||
)) { |
|||
draw_position( |
|||
current_position[X_AXIS], |
|||
current_position[Y_AXIS], |
|||
current_position[Z_AXIS], |
|||
#if ENABLED(DISABLE_REDUCED_ACCURACY_WARNING) |
|||
true |
|||
#else |
|||
axis_known_position[X_AXIS] && |
|||
axis_known_position[Y_AXIS] && |
|||
axis_known_position[Z_AXIS] |
|||
#endif |
|||
); |
|||
} |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::update_progress(const bool forceUpdate) { |
|||
const uint8_t percent_done = |
|||
#if ENABLED(SDSUPPORT) |
|||
card.percentDone() |
|||
#else |
|||
0 |
|||
#endif |
|||
; |
|||
|
|||
// Since the progress bar involves writing
|
|||
// quite a few bytes to GDRAM, only do this
|
|||
// when an update is actually necessary.
|
|||
|
|||
static uint8_t last_progress = 0; |
|||
if (!forceUpdate && last_progress == percent_done) return; |
|||
last_progress = percent_done; |
|||
|
|||
draw_progress_bar(percent_done); |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::update(const bool forceUpdate) { |
|||
cs(); |
|||
update_indicators(forceUpdate); |
|||
update_status_or_position(forceUpdate); |
|||
update_progress(forceUpdate); |
|||
ncs(); |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::reset_state_from_unknown() { |
|||
_extended_function_set(true, true); // Do it twice as only one bit
|
|||
_extended_function_set(true, true); // get set at a time.
|
|||
_scroll_or_addr_select(false); |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::on_entry() { |
|||
cs(); |
|||
reset_state_from_unknown(); |
|||
clear(); |
|||
clear_gdram(); |
|||
draw_static_elements(); |
|||
update(true); |
|||
ncs(); |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::on_exit() { |
|||
cs(); |
|||
clear(); |
|||
_extended_function_set(true, true); // Restore state to what u8g expects.
|
|||
ncs(); |
|||
} |
|||
|
|||
// This is called prior to the KILL screen to
|
|||
// clear the screen so we don't end up with a
|
|||
// garbled display.
|
|||
void ST7920_Lite_Status_Screen::clear_text_buffer() { |
|||
cs(); |
|||
reset_state_from_unknown(); |
|||
clear(); |
|||
_extended_function_set(true, true); // Restore state to what u8g expects.
|
|||
ncs(); |
|||
} |
|||
|
|||
static void lcd_implementation_status_screen() { |
|||
ST7920_Lite_Status_Screen::update(false); |
|||
} |
|||
|
|||
/**
|
|||
* In order to properly update the lite Status Screen, |
|||
* we must know when we have entered and left the |
|||
* Status Screen. Since the ultralcd code is not |
|||
* set up for doing this, we call this function before |
|||
* each update indicating whether the current screen |
|||
* is the Status Screen. |
|||
* |
|||
* This function keeps track of whether we have left or |
|||
* entered the Status Screen and calls the on_entry() |
|||
* and on_exit() methods for cleanup. |
|||
*/ |
|||
static void lcd_in_status(const bool inStatus) { |
|||
static bool lastInStatus = false; |
|||
if (lastInStatus == inStatus) return; |
|||
if ((lastInStatus = inStatus)) |
|||
ST7920_Lite_Status_Screen::on_entry(); |
|||
else |
|||
ST7920_Lite_Status_Screen::on_exit(); |
|||
} |
|||
@ -0,0 +1,108 @@ |
|||
/**
|
|||
* Lightweight Status Screen for the RepRapDiscount Full |
|||
* Graphics Smart Controller (ST7920-based 128x64 LCD) |
|||
* |
|||
* (c) 2017 Aleph Objects, Inc. |
|||
* |
|||
* The code in this page is free software: you can |
|||
* redistribute it and/or modify it under the terms of the GNU |
|||
* General Public License (GNU GPL) as published by the Free Software |
|||
* Foundation, either version 3 of the License, or (at your option) |
|||
* any later version. The code is distributed WITHOUT ANY WARRANTY; |
|||
* without even the implied warranty of MERCHANTABILITY or FITNESS |
|||
* FOR A PARTICULAR PURPOSE. See the GNU GPL for more details. |
|||
* |
|||
*/ |
|||
|
|||
#ifndef STATUS_SCREEN_LITE_ST7920_CLASS_H |
|||
#define STATUS_SCREEN_LITE_ST7920_CLASS_H |
|||
|
|||
#include "../../core/macros.h" |
|||
|
|||
typedef const __FlashStringHelper *progmem_str; |
|||
|
|||
class ST7920_Lite_Status_Screen { |
|||
private: |
|||
static struct st7920_state_t { |
|||
uint8_t synced : 1; // Whether a sync has been sent
|
|||
uint8_t cmd : 1; // Whether the sync was cmd or data
|
|||
uint8_t extended : 1; |
|||
uint8_t graphics : 1; |
|||
uint8_t sa : 1; |
|||
} current_bits; |
|||
|
|||
static void cs(); |
|||
static void ncs(); |
|||
static void sync_cmd(); |
|||
static void sync_dat(); |
|||
static void write_byte(const uint8_t w); |
|||
|
|||
FORCE_INLINE static void write_word(const uint16_t w) { |
|||
write_byte((w >> 8) & 0xFF); |
|||
write_byte((w >> 0) & 0xFF); |
|||
} |
|||
|
|||
static void cmd(const uint8_t cmd); |
|||
static void begin_data(); |
|||
|
|||
static void write_str(const char *str); |
|||
static void write_str(const char *str, const uint8_t len); |
|||
static void write_str_P(const char * const str); |
|||
static void write_str(progmem_str str); |
|||
static void write_number(const int16_t value, const uint8_t digits=3); |
|||
|
|||
static void _extended_function_set(const bool extended, const bool graphics); |
|||
static void _scroll_or_addr_select(const bool sa); |
|||
static void reset_state_from_unknown(); |
|||
|
|||
static void home(); |
|||
static void display_status(const bool display_on, const bool cursor_on, const bool blink_on); |
|||
static void extended_function_set(const bool extended); |
|||
static void graphics(const bool graphics); |
|||
static void entry_mode_select(const bool ac_increase, const bool shift); |
|||
static void scroll_or_addr_select(const bool sa); |
|||
static void set_ddram_address(const uint8_t addr); |
|||
static void set_cgram_address(const uint8_t addr); |
|||
static void set_gdram_address(const uint8_t x, const uint8_t y); |
|||
|
|||
static void clear(); |
|||
static void clear_ddram(); |
|||
static void clear_gdram(); |
|||
|
|||
static void load_cgram_icon(const uint16_t addr, const void *data); |
|||
static void draw_gdram_icon(uint8_t x, uint8_t y, const void *data); |
|||
|
|||
static uint8_t string_checksum(const char *str); |
|||
|
|||
protected: |
|||
static void draw_static_elements(); |
|||
static void draw_progress_bar(const uint8_t value); |
|||
static void draw_fan_icon(const bool whichIcon); |
|||
static void draw_heat_icon(const bool whichIcon, const bool heating); |
|||
static void draw_extruder_1_temp(const int16_t temp, const int16_t target); |
|||
static void draw_extruder_2_temp(const int16_t temp, const int16_t target); |
|||
static void draw_bed_temp(const int16_t temp, const int16_t target); |
|||
static void draw_fan_speed(const uint8_t value); |
|||
static void draw_print_time(const uint32_t elapsed); |
|||
static void draw_feedrate_percentage(const uint8_t percentage); |
|||
static void draw_status_message(const char *str); |
|||
static void draw_position(const float x, const float y, const float z, bool position_known = true); |
|||
|
|||
static bool indicators_changed(); |
|||
static bool position_changed(); |
|||
static bool blink_changed(); |
|||
static bool status_changed(); |
|||
|
|||
static void update_indicators(const bool forceUpdate); |
|||
static void update_position(const bool forceUpdate, bool resetChecksum); |
|||
static void update_status_or_position(bool forceUpdate); |
|||
static void update_progress(const bool forceUpdate); |
|||
|
|||
public: |
|||
static void update(const bool forceUpdate); |
|||
static void on_entry(); |
|||
static void on_exit(); |
|||
static void clear_text_buffer(); |
|||
}; |
|||
|
|||
#endif // STATUS_SCREEN_LITE_ST7920_CLASS_H
|
|||
@ -0,0 +1,39 @@ |
|||
/**
|
|||
* Lightweight Status Screen for the RepRapDiscount Full |
|||
* Graphics Smart Controller (ST7920-based 128x64 LCD) |
|||
* |
|||
* (c) 2017 Aleph Objects, Inc. |
|||
* |
|||
* The code in this page is free software: you can |
|||
* redistribute it and/or modify it under the terms of the GNU |
|||
* General Public License (GNU GPL) as published by the Free Software |
|||
* Foundation, either version 3 of the License, or (at your option) |
|||
* any later version. The code is distributed WITHOUT ANY WARRANTY; |
|||
* without even the implied warranty of MERCHANTABILITY or FITNESS |
|||
* FOR A PARTICULAR PURPOSE. See the GNU GPL for more details. |
|||
* |
|||
*/ |
|||
|
|||
#include "status_screen_lite_ST7920_class.h" |
|||
|
|||
void ST7920_Lite_Status_Screen::cs() { |
|||
ST7920_CS(); |
|||
current_bits.synced = false; |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::ncs() { |
|||
ST7920_NCS(); |
|||
current_bits.synced = false; |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::sync_cmd() { |
|||
ST7920_SET_CMD(); |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::sync_dat() { |
|||
ST7920_SET_DAT(); |
|||
} |
|||
|
|||
void ST7920_Lite_Status_Screen::write_byte(const uint8_t data) { |
|||
ST7920_WRITE_BYTE(data); |
|||
} |
|||
Loading…
Reference in new issue