diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 1ac1363d08..c4d2413779 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -1007,9 +1007,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/default/Configuration_adv.h b/Marlin/src/config/default/Configuration_adv.h
index 1ac1363d08..c4d2413779 100644
--- a/Marlin/src/config/default/Configuration_adv.h
+++ b/Marlin/src/config/default/Configuration_adv.h
@@ -1007,9 +1007,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index 901d7f1a1a..8dcf63c545 100644
--- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -1007,9 +1007,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
index 7afe0d4457..25464f9f3f 100644
--- a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
@@ -1007,9 +1007,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
index 68c60435e1..dff8527806 100644
--- a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
@@ -1007,9 +1007,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
index 619cd03fc0..d9c942ee16 100644
--- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
+++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
@@ -1008,9 +1008,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
index 0d7ff440f5..f27da5eab1 100644
--- a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -1007,9 +1007,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
index 43084cf998..71ff696174 100644
--- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -1007,9 +1007,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
index 0d7ff440f5..f27da5eab1 100644
--- a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -1007,9 +1007,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/Cartesio/Configuration_adv.h b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
index cc38a94b65..ac49be545b 100644
--- a/Marlin/src/config/examples/Cartesio/Configuration_adv.h
+++ b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
@@ -1007,9 +1007,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
index e379e7e235..29c5cbcb4a 100755
--- a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
@@ -1007,9 +1007,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
index 8a296a3eb4..a20bcd0bf1 100644
--- a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
@@ -1007,9 +1007,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/Creality/Ender/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender/Configuration_adv.h
index 9fc0acfcd8..403fac4c5b 100644
--- a/Marlin/src/config/examples/Creality/Ender/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/Ender/Configuration_adv.h
@@ -1007,9 +1007,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/Felix/Configuration_adv.h b/Marlin/src/config/examples/Felix/Configuration_adv.h
index bad192f996..73fd607651 100644
--- a/Marlin/src/config/examples/Felix/Configuration_adv.h
+++ b/Marlin/src/config/examples/Felix/Configuration_adv.h
@@ -1007,9 +1007,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index 1b4b24a698..0a50945657 100644
--- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -1007,9 +1007,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
index f6533f6116..6ccefaa5d2 100644
--- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -1007,9 +1007,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
index 96789e6bcc..faaf7d38dc 100644
--- a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
@@ -1007,9 +1007,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/MakerParts/Configuration_adv.h b/Marlin/src/config/examples/MakerParts/Configuration_adv.h
index a80749bb6c..572ae83aeb 100644
--- a/Marlin/src/config/examples/MakerParts/Configuration_adv.h
+++ b/Marlin/src/config/examples/MakerParts/Configuration_adv.h
@@ -1008,9 +1008,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
index 404875323f..5235c76405 100644
--- a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
+++ b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
@@ -1007,9 +1007,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
index 90fd7c0ca8..5c4bf303d0 100644
--- a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
+++ b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
@@ -1007,9 +1007,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index 38d43dddc0..16988fea5a 100644
--- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -1007,9 +1007,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
index 1c6837e251..107a4787d6 100644
--- a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
@@ -1015,9 +1015,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/RigidBot/Configuration_adv.h b/Marlin/src/config/examples/RigidBot/Configuration_adv.h
index 323036e709..10195bd61e 100644
--- a/Marlin/src/config/examples/RigidBot/Configuration_adv.h
+++ b/Marlin/src/config/examples/RigidBot/Configuration_adv.h
@@ -1007,9 +1007,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/SCARA/Configuration_adv.h b/Marlin/src/config/examples/SCARA/Configuration_adv.h
index a010bf682b..1c4ea0d3b2 100644
--- a/Marlin/src/config/examples/SCARA/Configuration_adv.h
+++ b/Marlin/src/config/examples/SCARA/Configuration_adv.h
@@ -1007,9 +1007,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
index 62d62df77c..ffb2d4db82 100644
--- a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
+++ b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
@@ -1007,9 +1007,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/TheBorg/Configuration_adv.h b/Marlin/src/config/examples/TheBorg/Configuration_adv.h
index 3eebc90111..2ad30161b3 100644
--- a/Marlin/src/config/examples/TheBorg/Configuration_adv.h
+++ b/Marlin/src/config/examples/TheBorg/Configuration_adv.h
@@ -1004,9 +1004,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
index 4fab657eef..8c6e4c5dba 100644
--- a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
+++ b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
@@ -1007,9 +1007,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
index 946352e995..b55c447931 100644
--- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -1007,9 +1007,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
index c64f2287ff..51c3ab11d8 100644
--- a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
@@ -1020,9 +1020,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
index b81af0095b..685b37676b 100644
--- a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
@@ -1007,9 +1007,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
index 010a7e440d..e73fb18dc2 100644
--- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
+++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
@@ -1009,9 +1009,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index 145acc4fd1..506d55ff90 100644
--- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -1009,9 +1009,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
index babb137106..3243c7d1ba 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
@@ -1009,9 +1009,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index 53d433d686..5ab045749a 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -1009,9 +1009,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/delta/generic/Configuration_adv.h b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
index 53d433d686..5ab045749a 100644
--- a/Marlin/src/config/examples/delta/generic/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
@@ -1009,9 +1009,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
index 53d433d686..5ab045749a 100644
--- a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
@@ -1009,9 +1009,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
index bb5765fe8b..1454beb949 100644
--- a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
@@ -1014,9 +1014,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
index f130c43d47..6140077c74 100644
--- a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -1009,9 +1009,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index f81a912f6e..32a40a8a0f 100644
--- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -1007,9 +1007,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/makibox/Configuration_adv.h b/Marlin/src/config/examples/makibox/Configuration_adv.h
index 53269b3b50..1af6c0a1cd 100644
--- a/Marlin/src/config/examples/makibox/Configuration_adv.h
+++ b/Marlin/src/config/examples/makibox/Configuration_adv.h
@@ -1007,9 +1007,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
index e81c1d8611..4c3a61b0cd 100644
--- a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -1007,9 +1007,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
diff --git a/Marlin/src/config/examples/wt150/Configuration_adv.h b/Marlin/src/config/examples/wt150/Configuration_adv.h
index 83032ee656..cf007a40c8 100644
--- a/Marlin/src/config/examples/wt150/Configuration_adv.h
+++ b/Marlin/src/config/examples/wt150/Configuration_adv.h
@@ -1008,9 +1008,9 @@
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library