andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Fix line-endings, formatting, whitespace 

Followup to #12770
pull/1/head
Scott Lahteine 6 years ago
parent
135c74017c
commit
371d9a1acf
5 changed files with 180 additions and 208 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 2
      Marlin/Configuration_adv.h
  2. 2
      Marlin/src/module/configuration_store.cpp
  3. 2
      Marlin/src/pins/pins.h
  4. 2
      Marlin/src/pins/pins_DUPLICATOR_I3_PLUS.h
  5. 380
      Marlin/src/pins/pins_MKS_BASE_14.h

2
Marlin/Configuration_adv.h
View File

@ -841,7 +841,7 @@
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
//#define STATUS_ALT_FAN_BITMAP // Use the alternate fan bitmap
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar

2
Marlin/src/module/configuration_store.cpp
View File

@ -488,7 +488,7 @@ void MarlinSettings::postprocess() {
EEPROM_WRITE(dummy);
#endif
#else
const float planner_max_jerk[XYZE] = { float(DEFAULT_EJERK) };
const float planner_max_jerk[XYZE] = { float(DEFAULT_EJERK) };
EEPROM_WRITE(planner_max_jerk);
#endif

2
Marlin/src/pins/pins.h
View File

@ -101,7 +101,7 @@
#elif MB(MKS_BASE)
#include "pins_MKS_BASE.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560
#elif MB(MKS_BASE_14)
#include "pins_MKS_BASE_14.h" // ATmega2560 env:megaatmega2560
#include "pins_MKS_BASE_14.h" // ATmega2560 env:megaatmega2560
#elif MB(MKS_BASE_15)
#include "pins_MKS_BASE_15.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560
#elif MB(MKS_BASE_HEROIC)

2
Marlin/src/pins/pins_DUPLICATOR_I3_PLUS.h
View File

@ -141,7 +141,7 @@
* ##################################
*
* @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
*
*
* == Y-endstop == == Z-endstop == == Bed temperature ==
*
* 1 2 1 2 1 2

380
Marlin/src/pins/pins_MKS_BASE_14.h
View File

@ -1,204 +1,176 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* MKS BASE v1.4
*/
#if HOTENDS > 2 || E_STEPPERS > 2
#error "MKS BASE 1.4 only supports up to 2 hotends / E-steppers. Comment out this line to continue."
#endif
#define BOARD_NAME "MKS BASE 1.4"
//
// Heaters / Fans
//
#define MOSFET_D_PIN 7 // PH4 ** Pin16 ** PWM7 //E1
#define FAN_PIN 9 // PH6 ** Pin18 ** PWM9
// Other Mods
#define CASE_LIGHT_PIN 11 // PB5 ** Pin24 ** PWM11
#define SERVO3_PIN 12 // PB6 ** Pin25 ** D12
#define PS_ON_PIN 2 // X+ // PE4 ** Pin6 ** PWM2 **MUST BE HARDWARE PWM
#define FILWIDTH_PIN 15 // Y+ // PJ0 ** Pin63 ** USART3_RX **Pin should have a pullup!
#define FIL_RUNOUT_PIN 19 // Z+ // PD2 ** Pin45 ** USART1_RX
//
// M3/M4/M5 - Spindle/Laser Control
//
#define SPINDLE_LASER_PWM_PIN 2 // X+ // PE4 ** Pin6 ** PWM2 **MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 15 // Y+ // PJ0 ** Pin63 ** USART3_RX **Pin should have a pullup!
#define SPINDLE_DIR_PIN 19 // Z+ // PD2 ** Pin45 ** USART1_RX
/**
* Microstepping pins
*/
#define X_MS1_PIN 5 // PE3 ** Pin5 ** PWM5
#define X_MS2_PIN 6 // PH3 ** Pin15 ** PWM6
#define Y_MS1_PIN 59 // PF5 ** Pin92 ** A5
#define Y_MS2_PIN 58 // PF4 ** Pin93 ** A4
#define Z_MS1_PIN 22 // PA0 ** Pin78 ** D22
#define Z_MS2_PIN 39 // PG2 ** Pin70 ** D39
#define E0_MS1_PIN 64 // PK2 ** Pin87 ** A10
#define E0_MS2_PIN 63 // PK1 ** Pin88 ** A9
#define E1_MS1_PIN 57 // PF3 ** Pin94 ** A3
#define E1_MS2_PIN 4 // PG5 ** Pin1 ** PWM4
#include "pins_RAMPS.h"
/*****************************************/
/* Available connectors on MKS BASE v1.4 */
/*****************************************/
/*
*******
* GND *
******* E0
* 10 *
*******
* GND *
******* E1
* 7 *
*******
* GND *
******* FAN
* 9 *
*******
10 // PB4 ** Pin23 ** PWM10
7 // PH4 ** Pin16 ** PWM7
9 // PH6 ** Pin18 ** PWM9
*******
* GND *
******* Heat Bed
* 8 *
*******
8 // PH5 ** Pin17 ** PWM8
**********
* 12-24V *
********** Power
* GND *
**********
XS3 Connector
*****************
* 65 * GND * 5V *
*****************
* 66 * GND * 5V *
*****************
65 // PK3 ** Pin86 ** A11
66 // PK4 ** Pin85 ** A12
Servos Connector
*****************
* 11 * GND * 5V *
*****************
* 12 * GND * 5V *
*****************
11 // PB5 ** Pin24 ** PWM11
12 // PB6 ** Pin25 ** PWM12
ICSP
*****************
* 5V * 51 * GND *
*****************
* 50 * 52 * RST *
*****************
50 // PB3 ** Pin22 ** SPI_MISO
51 // PB2 ** Pin21 ** SPI_MOSI
52 // PB1 ** Pin20 ** SPI_SCK
XS6/AUX-1 Connector
**********************
* 5V * GND * NC * 20 *
**********************
* 50 * 51 * 52 * 21 *
**********************
50 // PB3 ** Pin22 ** SPI_MISO
51 // PB2 ** Pin21 ** SPI_MOSI
52 // PB1 ** Pin20 ** SPI_SCK
20 // PD1 ** Pin44 ** I2C_SDA
21 // PD0 ** Pin43 ** I2C_SCL
Temperature
**********************************
* GND * 69 * GND * 68 * GND * 68 *
**********************************
69 // PK7 ** Pin82 ** A15
68 // PK6 ** Pin83 ** A14
67 // PK5 ** Pin84 ** A13
Limit Switches
************
* 2 * GND * X+
************
* 3 * GND * X-
************
* 15 * GND * Y+
************
* 14 * GND * Y-
************
* 19 * GND * Z+
************
* 18 * GND * Z-
************
2 // PE4 ** Pin6 ** PWM2 **X+
3 // PE5 ** Pin7 ** PWM3 **X-
15 // PJ0 ** Pin63 ** USART3_RX **Y+
14 // PJ1 ** Pin64 ** USART3_TX **Y-
19 // PD2 ** Pin45 ** USART1_RX **Z+
18 // PD3 ** Pin46 ** USART1_TX **Z-
EXP1
************
* 37 * 35 *
************
* 17 * 16 *
************
* 23 * 25 *
************
* 27 * 29 *
************
* GND * 5V *
************
37 // PC0 ** Pin53 ** D37
35 // PC2 ** Pin55 ** D35
17 // PH0 ** Pin12 ** USART2_RX
16 // PH1 ** Pin13 ** USART2_TX
23 // PA1 ** Pin77 ** D23
25 // PA3 ** Pin75 ** D25
27 // PA5 ** Pin73 ** D27
29 // PA7 ** Pin71 ** D29
EXP2
************
* 50 * 52 *
************
* 31 * 53 *
************
* 33 * 51 *
************
* 49 * 41 *
************
* GND * NC *
************
50 // PB3 ** Pin22 ** SPI_MISO
52 // PB1 ** Pin20 ** SPI_SCK
31 // PC6 ** Pin59 ** D31
53 // PB0 ** Pin19 ** SPI_SS
33 // PC4 ** Pin57 ** D33
51 // PB2 ** Pin21 ** SPI_MOSI
49 // PL0 ** Pin35 ** D49
41 // PG0 ** Pin51 ** D41
*/
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* MKS BASE v1.4
*/
#if HOTENDS > 2 || E_STEPPERS > 2
#error "MKS BASE 1.4 only supports up to 2 hotends / E-steppers. Comment out this line to continue."
#endif
#define BOARD_NAME "MKS BASE 1.4"
//
// Heaters / Fans
//
#define MOSFET_D_PIN 7 // PH4 ** Pin16 ** PWM7 //E1
#define FAN_PIN 9 // PH6 ** Pin18 ** PWM9
// Other Mods
#define CASE_LIGHT_PIN 11 // PB5 ** Pin24 ** PWM11
#define SERVO3_PIN 12 // PB6 ** Pin25 ** D12
#define PS_ON_PIN 2 // X+ // PE4 ** Pin6 ** PWM2 **MUST BE HARDWARE PWM
#define FILWIDTH_PIN 15 // Y+ // PJ0 ** Pin63 ** USART3_RX **Pin should have a pullup!
#define FIL_RUNOUT_PIN 19 // Z+ // PD2 ** Pin45 ** USART1_RX
//
// M3/M4/M5 - Spindle/Laser Control
//
#define SPINDLE_LASER_PWM_PIN 2 // X+ // PE4 ** Pin6 ** PWM2 **MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 15 // Y+ // PJ0 ** Pin63 ** USART3_RX **Pin should have a pullup!
#define SPINDLE_DIR_PIN 19 // Z+ // PD2 ** Pin45 ** USART1_RX
//
// Microstepping pins
//
#define X_MS1_PIN 5 // PE3 ** Pin5 ** PWM5
#define X_MS2_PIN 6 // PH3 ** Pin15 ** PWM6
#define Y_MS1_PIN 59 // PF5 ** Pin92 ** A5
#define Y_MS2_PIN 58 // PF4 ** Pin93 ** A4
#define Z_MS1_PIN 22 // PA0 ** Pin78 ** D22
#define Z_MS2_PIN 39 // PG2 ** Pin70 ** D39
#define E0_MS1_PIN 64 // PK2 ** Pin87 ** A10
#define E0_MS2_PIN 63 // PK1 ** Pin88 ** A9
#define E1_MS1_PIN 57 // PF3 ** Pin94 ** A3
#define E1_MS2_PIN 4 // PG5 ** Pin1 ** PWM4
#include "pins_RAMPS.h"
/*
Available connectors on MKS BASE v1.4
=======
| GND |
|-----| E0
| 10 | (10) PB4 ** Pin23 ** PWM10
|-----|
| GND |
|-----| E1
| 7 | ( 7) PH4 ** Pin16 ** PWM7
|-----|
| GND |
|-----| FAN
| 9 | ( 9) PH6 ** Pin18 ** PWM9
=======
=======
| GND |
|-----| Heated Bed
| 8 | ( 8) PH5 ** Pin17 ** PWM8
=======
==========
| 12-24V |
|--------| Power
| GND |
==========
XS3 Connector
=================
| 65 | GND | 5V | (65) PK3 ** Pin86 ** A11
|----|-----|----|
| 66 | GND | 5V | (66) PK4 ** Pin85 ** A12
=================
Servos Connector
=================
| 11 | GND | 5V | (11) PB5 ** Pin24 ** PWM11
|----|-----|----|
| 12 | GND | 5V | (12) PB6 ** Pin25 ** PWM12
=================
ICSP
=================
| 5V | 51 | GND | (51) PB2 ** Pin21 ** SPI_MOSI
|----|----|-----|
| 50 | 52 | RST | (50) PB3 ** Pin22 ** SPI_MISO
================= (52) PB1 ** Pin20 ** SPI_SCK
XS6/AUX-1 Connector
======================
| 5V | GND | NC | 20 | (20) PD1 ** Pin44 ** I2C_SDA
|----|-----|----|----|
| 50 | 51 | 52 | 21 | (50) PB3 ** Pin22 ** SPI_MISO
====================== (51) PB2 ** Pin21 ** SPI_MOSI
(52) PB1 ** Pin20 ** SPI_SCK
(21) PD0 ** Pin43 ** I2C_SCL
Temperature
==================================
| GND | 69 | GND | 68 | GND | 67 |
==================================
(69) PK7 ** Pin82 ** A15
(68) PK6 ** Pin83 ** A14
(67) PK5 ** Pin84 ** A13
Limit Switches
============
| 2 | GND | X+ ( 2) PE4 ** Pin6 ** PWM2
|----|-----|
| 3 | GND | X- ( 3) PE5 ** Pin7 ** PWM3
|----|-----|
| 15 | GND | Y+ (15) PJ0 ** Pin63 ** USART3_RX
|----|-----|
| 14 | GND | Y- (14) PJ1 ** Pin64 ** USART3_TX
|----|-----|
| 19 | GND | Z+ (19) PD2 ** Pin45 ** USART1_RX
|----|-----|
| 18 | GND | Z- (18) PD3 ** Pin46 ** USART1_TX
============
EXP1
============
| 37 | 35 | (37) PC0 ** Pin53 ** D37
|-----|----| (35) PC2 ** Pin55 ** D35
| 17 | 16 | (17) PH0 ** Pin12 ** USART2_RX
|-----|----| (16) PH1 ** Pin13 ** USART2_TX
| 23 | 25 | (23) PA1 ** Pin77 ** D23
|-----|----| (25) PA3 ** Pin75 ** D25
| 27 | 29 | (27) PA5 ** Pin73 ** D27
|-----|----| (29) PA7 ** Pin71 ** D29
| GND | 5V |
============
EXP2
============
| 50 | 52 | (50) PB3 ** Pin22 ** SPI_MISO
|-----|----| (52) PB1 ** Pin20 ** SPI_SCK
| 31 | 53 | (31) PC6 ** Pin59 ** D31
|-----|----| (53) PB0 ** Pin19 ** SPI_SS
| 33 | 51 | (33) PC4 ** Pin57 ** D33
|-----|----| (51) PB2 ** Pin21 ** SPI_MOSI
| 49 | 41 | (49) PL0 ** Pin35 ** D49
|-----|----| (41) PG0 ** Pin51 ** D41
| GND | NC |
============
*/

Write Preview
Loading…
Cancel
Save