diff --git a/Marlin/src/lcd/malyanlcd.cpp b/Marlin/src/lcd/malyanlcd.cpp index a87f3655c0..daeeba2f38 100644 --- a/Marlin/src/lcd/malyanlcd.cpp +++ b/Marlin/src/lcd/malyanlcd.cpp @@ -45,8 +45,6 @@ #if ENABLED(MALYAN_LCD) -#include "../sd/cardreader.h" -#include "../sd/SdFatConfig.h" #include "../module/temperature.h" #include "../module/planner.h" #include "../module/stepper.h" @@ -60,6 +58,13 @@ #include "../Marlin.h" +#if ENABLED(SDSUPPORT) + #include "../sd/cardreader.h" + #include "../sd/SdFatConfig.h" +#else + #define LONG_FILENAME_LENGTH 0 +#endif + // On the Malyan M200, this will be Serial1. On a RAMPS board, // it might not be. #define LCD_SERIAL Serial1 @@ -135,8 +140,6 @@ void process_lcd_c_command(const char* command) { void process_lcd_eb_command(const char* command) { char elapsed_buffer[10]; duration_t elapsed; - bool has_days; - uint8_t len; switch (command[0]) { case '0': { elapsed = print_job_timer.duration(); @@ -147,9 +150,17 @@ void process_lcd_eb_command(const char* command) { PSTR("{T0:%03.0f/%03i}{T1:000/000}{TP:%03.0f/%03i}{TQ:%03i}{TT:%s}"), thermalManager.degHotend(0), thermalManager.degTargetHotend(0), - thermalManager.degBed(), - thermalManager.degTargetBed(), - card.percentDone(), + #if HAS_HEATED_BED + thermalManager.degBed(), + thermalManager.degTargetBed(), + #else + 0, 0, + #endif + #if ENABLED(SDSUPPORT) + card.percentDone(), + #else + 0, + #endif elapsed_buffer); write_to_lcd(message_buffer); } break; @@ -226,51 +237,55 @@ void process_lcd_p_command(const char* command) { switch (command[0]) { case 'X': - // cancel print - write_to_lcd_P(PSTR("{SYS:CANCELING}")); - card.stopSDPrint( - #if SD_RESORT - true + #if ENABLED(SDSUPPORT) + // cancel print + write_to_lcd_P(PSTR("{SYS:CANCELING}")); + card.stopSDPrint( + #if SD_RESORT + true + #endif + ); + clear_command_queue(); + quickstop_stepper(); + print_job_timer.stop(); + thermalManager.disable_all_heaters(); + #if FAN_COUNT > 0 + for (uint8_t i = 0; i < FAN_COUNT; i++) fanSpeeds[i] = 0; #endif - ); - clear_command_queue(); - quickstop_stepper(); - print_job_timer.stop(); - thermalManager.disable_all_heaters(); - #if FAN_COUNT > 0 - for (uint8_t i = 0; i < FAN_COUNT; i++) fanSpeeds[i] = 0; + wait_for_heatup = false; + write_to_lcd_P(PSTR("{SYS:STARTED}")); #endif - wait_for_heatup = false; - write_to_lcd_P(PSTR("{SYS:STARTED}")); break; case 'H': // Home all axis enqueue_and_echo_commands_now_P(PSTR("G28")); break; default: { - // Print file 000 - a three digit number indicating which - // file to print in the SD card. If it's a directory, - // then switch to the directory. - - // Find the name of the file to print. - // It's needed to echo the PRINTFILE option. - // The {S:L} command should've ensured the SD card was mounted. - card.getfilename(atoi(command)); - - // There may be a difference in how V1 and V2 LCDs handle subdirectory - // prints. Investigate more. This matches the V1 motion controller actions - // but the V2 LCD switches to "print" mode on {SYS:DIR} response. - if (card.filenameIsDir) { - card.chdir(card.filename); - write_to_lcd_P(PSTR("{SYS:DIR}")); - } - else { - char message_buffer[MAX_CURLY_COMMAND]; - sprintf_P(message_buffer, PSTR("{PRINTFILE:%s}"), card.filename); - write_to_lcd(message_buffer); - write_to_lcd_P(PSTR("{SYS:BUILD}")); - card.openAndPrintFile(card.filename); - } + #if ENABLED(SDSUPPORT) + // Print file 000 - a three digit number indicating which + // file to print in the SD card. If it's a directory, + // then switch to the directory. + + // Find the name of the file to print. + // It's needed to echo the PRINTFILE option. + // The {S:L} command should've ensured the SD card was mounted. + card.getfilename(atoi(command)); + + // There may be a difference in how V1 and V2 LCDs handle subdirectory + // prints. Investigate more. This matches the V1 motion controller actions + // but the V2 LCD switches to "print" mode on {SYS:DIR} response. + if (card.filenameIsDir) { + card.chdir(card.filename); + write_to_lcd_P(PSTR("{SYS:DIR}")); + } + else { + char message_buffer[MAX_CURLY_COMMAND]; + sprintf_P(message_buffer, PSTR("{PRINTFILE:%s}"), card.filename); + write_to_lcd(message_buffer); + write_to_lcd_P(PSTR("{SYS:BUILD}")); + card.openAndPrintFile(card.filename); + } + #endif } break; // default } // switch } @@ -295,34 +310,40 @@ void process_lcd_s_command(const char* command) { char message_buffer[MAX_CURLY_COMMAND]; sprintf_P(message_buffer, PSTR("{T0:%03.0f/%03i}{T1:000/000}{TP:%03.0f/%03i}"), thermalManager.degHotend(0), thermalManager.degTargetHotend(0), - thermalManager.degBed(), thermalManager.degTargetBed() + #if HAS_HEATED_BED + thermalManager.degBed(), thermalManager.degTargetBed() + #else + 0, 0 + #endif ); write_to_lcd(message_buffer); } break; case 'H': // Home all axis - enqueue_and_echo_commands_P(PSTR("G28")); + enqueue_and_echo_command("G28"); break; case 'L': { - if (!card.cardOK) card.initsd(); - - // A more efficient way to do this would be to - // implement a callback in the ls_SerialPrint code, but - // that requires changes to the core cardreader class that - // would not benefit the majority of users. Since one can't - // select a file for printing during a print, there's - // little reason not to do it this way. - char message_buffer[MAX_CURLY_COMMAND]; - uint16_t file_count = card.get_num_Files(); - for (uint16_t i = 0; i < file_count; i++) { - card.getfilename(i); - sprintf_P(message_buffer, card.filenameIsDir ? PSTR("{DIR:%s}") : PSTR("{FILE:%s}"), card.filename); - write_to_lcd(message_buffer); - } - - write_to_lcd_P(PSTR("{SYS:OK}")); + #if ENABLED(SDSUPPORT) + if (!card.cardOK) card.initsd(); + + // A more efficient way to do this would be to + // implement a callback in the ls_SerialPrint code, but + // that requires changes to the core cardreader class that + // would not benefit the majority of users. Since one can't + // select a file for printing during a print, there's + // little reason not to do it this way. + char message_buffer[MAX_CURLY_COMMAND]; + uint16_t file_count = card.get_num_Files(); + for (uint16_t i = 0; i < file_count; i++) { + card.getfilename(i); + sprintf_P(message_buffer, card.filenameIsDir ? PSTR("{DIR:%s}") : PSTR("{FILE:%s}"), card.filename); + write_to_lcd(message_buffer); + } + + write_to_lcd_P(PSTR("{SYS:OK}")); + #endif } break; default: @@ -382,7 +403,7 @@ void update_usb_status(const bool forceUpdate) { // appears to use the usb discovery status. // This is more logical. if (last_usb_connected_status != Serial || forceUpdate) { - last_usb_connected_status = Serial; + last_usb_connected_status = Serial; write_to_lcd_P(last_usb_connected_status ? PSTR("{R:UC}\r\n") : PSTR("{R:UD}\r\n")); } } @@ -411,15 +432,17 @@ void lcd_update() { } } - // If there's a print in progress, we need to emit the status as - // {TQ:} - if (card.sdprinting) { - // We also need to send: T:-2538.0 E:0 - // I have no idea what this means. - char message_buffer[10]; - sprintf_P(message_buffer, PSTR("{TQ:%03i}"), card.percentDone()); - write_to_lcd(message_buffer); - } + #if ENABLED(SDSUPPORT) + // If there's a print in progress, we need to emit the status as + // {TQ:} + if (card.sdprinting) { + // We also need to send: T:-2538.0 E:0 + // I have no idea what this means. + char message_buffer[10]; + sprintf_P(message_buffer, PSTR("{TQ:%03i}"), card.percentDone()); + write_to_lcd(message_buffer); + } + #endif } /**