diff --git a/Marlin/src/feature/pause.cpp b/Marlin/src/feature/pause.cpp
index c1bc4057f9..54ac5488b3 100644
--- a/Marlin/src/feature/pause.cpp
+++ b/Marlin/src/feature/pause.cpp
@@ -93,16 +93,21 @@ static void ensure_safe_temperature() {
   }
 }
 
+void do_pause_e_move(const float &length, const float fr) {
+  current_position[E_AXIS] += length;
+  set_destination_from_current();
+  #if IS_KINEMATIC
+    planner.buffer_line_kinematic(destination, fr, active_extruder);
+  #else
+    line_to_destination(fr);
+  #endif
+  stepper.synchronize();
+}
+
 // public:
 
 bool move_away_flag = false;
 
-#if IS_KINEMATIC
-  #define RUNPLAN(RATE_MM_S) planner.buffer_line_kinematic(destination, RATE_MM_S, active_extruder)
-#else
-  #define RUNPLAN(RATE_MM_S) line_to_destination(RATE_MM_S)
-#endif
-
 bool pause_print(const float &retract, const float &z_lift, const float &x_pos, const float &y_pos,
                         const float &unload_length/*=0*/ , const int8_t max_beep_count/*=0*/, const bool show_lcd/*=false*/
 ) {
@@ -140,17 +145,11 @@ bool pause_print(const float &retract, const float &z_lift, const float &x_pos,
     #endif
   }
 
-  // Save current position
   stepper.synchronize();
-  COPY(resume_position, current_position);
-
-  if (retract) {
-    // Initial retract before move to filament change position
-    set_destination_from_current();
-    destination[E_AXIS] += retract;
-    RUNPLAN(PAUSE_PARK_RETRACT_FEEDRATE);
-    stepper.synchronize();
-  }
+  COPY(resume_position, current_position); // Save current position for later
+
+  // Initial retract before move to filament change position
+  if (retract) do_pause_e_move(retract, PAUSE_PARK_RETRACT_FEEDRATE);
 
   // Lift Z axis
   if (z_lift > 0)
@@ -168,10 +167,7 @@ bool pause_print(const float &retract, const float &z_lift, const float &x_pos,
     }
 
     // Unload filament
-    set_destination_from_current();
-    destination[E_AXIS] += unload_length;
-    RUNPLAN(FILAMENT_CHANGE_UNLOAD_FEEDRATE);
-    stepper.synchronize();
+    do_pause_e_move(unload_length, FILAMENT_CHANGE_UNLOAD_FEEDRATE);
   }
 
   if (show_lcd) {
@@ -272,8 +268,6 @@ void resume_print(const float &load_length/*=0*/, const float &initial_extrude_l
     filament_change_beep(max_beep_count, true);
   #endif
 
-  set_destination_from_current();
-
   if (load_length != 0) {
     #if ENABLED(ULTIPANEL)
       // Show "insert filament"
@@ -297,9 +291,7 @@ void resume_print(const float &load_length/*=0*/, const float &initial_extrude_l
     #endif
 
     // Load filament
-    destination[E_AXIS] += load_length;
-    RUNPLAN(FILAMENT_CHANGE_LOAD_FEEDRATE);
-    stepper.synchronize();
+    do_pause_e_move(load_length, FILAMENT_CHANGE_LOAD_FEEDRATE);
   }
 
   #if ENABLED(ULTIPANEL) && ADVANCED_PAUSE_EXTRUDE_LENGTH > 0
@@ -312,9 +304,7 @@ void resume_print(const float &load_length/*=0*/, const float &initial_extrude_l
         lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_EXTRUDE);
 
         // Extrude filament to get into hotend
-        destination[E_AXIS] += extrude_length;
-        RUNPLAN(ADVANCED_PAUSE_EXTRUDE_FEEDRATE);
-        stepper.synchronize();
+        do_pause_e_move(extrude_length, ADVANCED_PAUSE_EXTRUDE_FEEDRATE);
       }
 
       // Show "Extrude More" / "Resume" menu and wait for reply
@@ -337,8 +327,7 @@ void resume_print(const float &load_length/*=0*/, const float &initial_extrude_l
   #endif
 
   // Set extruder to saved position
-  destination[E_AXIS] = current_position[E_AXIS] = resume_position[E_AXIS];
-  planner.set_e_position_mm(current_position[E_AXIS]);
+  planner.set_e_position_mm((current_position[E_AXIS] = resume_position[E_AXIS]));
 
   // Move XY to starting position, then Z
   do_blocking_move_to_xy(resume_position[X_AXIS], resume_position[Y_AXIS], PAUSE_PARK_XY_FEEDRATE);
@@ -349,7 +338,7 @@ void resume_print(const float &load_length/*=0*/, const float &initial_extrude_l
   #endif
 
   #if ENABLED(ULTIPANEL)
-    // Show status screen
+    // Show pause status screen
     lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_STATUS);
   #endif
 
diff --git a/Marlin/src/lcd/ultralcd_impl_HD44780.h b/Marlin/src/lcd/ultralcd_impl_HD44780.h
index b9b14cc1bb..b835583e99 100644
--- a/Marlin/src/lcd/ultralcd_impl_HD44780.h
+++ b/Marlin/src/lcd/ultralcd_impl_HD44780.h
@@ -713,10 +713,10 @@ static void lcd_implementation_status_screen() {
 
       lcd.setCursor(8, 0);
       #if HOTENDS > 1
-        lcd.print((CHAR)LCD_STR_THERMOMETER[0]);
+        lcd.print((char)LCD_STR_THERMOMETER[0]);
         _draw_heater_status(1, -1, blink);
       #else
-        lcd.print((CHAR)LCD_BEDTEMP_CHAR);
+        lcd.print((char)LCD_BEDTEMP_CHAR);
         _draw_heater_status(-1, -1, blink);
       #endif