From 3162d378ffbb0cbd6f503e85fde7f2a8cca99e2c Mon Sep 17 00:00:00 2001
From: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com>
Date: Thu, 2 Jan 2020 18:41:50 -0800
Subject: [PATCH] Add Ender-5 leadscrew README (#16424)

---
 config/examples/Creality/Ender-5/README.md | 13 +++++++++++++
 1 file changed, 13 insertions(+)
 create mode 100644 config/examples/Creality/Ender-5/README.md

diff --git a/config/examples/Creality/Ender-5/README.md b/config/examples/Creality/Ender-5/README.md
new file mode 100644
index 0000000000..ef74777b91
--- /dev/null
+++ b/config/examples/Creality/Ender-5/README.md
@@ -0,0 +1,13 @@
+# Creality Ender-5 Leadscrew Changes
+
+In mid-to-late 2019, Creality upgraded the base Ender-5 leadscrew to the same one used on the Ender-5 Pro which prevents the bed from dropping once power is cut.
+
+If your machine shipped with the upgraded leadscrew (or if your prints are 1/2 as tall as they should be), change your Z steps from `400` to `800` in `Configuration.h`:
+
+Before:
+`DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }`
+
+After:
+`DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 800, 93 }`
+
+Or by sending `M92 Z800` followed by `M500` after updating your firmware.