Add DEFAULT_KEEPALIVE_INTERVAL setting

8 years ago · 2eca8d63b3
19 changed files with 76 additions and 19 deletions
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@ -721,9 +721,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // Host Keepalive
 //
 // By default Marlin will send a busy status message to the host
-// every 10 seconds when it can't accept commands.
+// every couple of seconds when it can't accept commands.
 //
 //#define DISABLE_HOST_KEEPALIVE // Enable this option if your host doesn't like keepalive messages.
+#if DISABLED(DISABLE_HOST_KEEPALIVE)
+  #define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
+#endif

 //
 // M100 Free Memory Watcher
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@ -704,9 +704,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // Host Keepalive
 //
 // By default Marlin will send a busy status message to the host
-// every 10 seconds when it can't accept commands.
+// every couple of seconds when it can't accept commands.
 //
 //#define DISABLE_HOST_KEEPALIVE // Enable this option if your host doesn't like keepalive messages.
+#if DISABLED(DISABLE_HOST_KEEPALIVE)
+  #define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
+#endif

 //
 // M100 Free Memory Watcher
--- a/Marlin/example_configurations/Felix/Configuration_DUAL.h
+++ b/Marlin/example_configurations/Felix/Configuration_DUAL.h
@ -701,9 +701,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // Host Keepalive
 //
 // By default Marlin will send a busy status message to the host
-// every 10 seconds when it can't accept commands.
+// every couple of seconds when it can't accept commands.
 //
 //#define DISABLE_HOST_KEEPALIVE // Enable this option if your host doesn't like keepalive messages.
+#if DISABLED(DISABLE_HOST_KEEPALIVE)
+  #define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
+#endif

 //
 // M100 Free Memory Watcher
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@ -713,9 +713,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 // Host Keepalive
 //
 // By default Marlin will send a busy status message to the host
-// every 10 seconds when it can't accept commands.
+// every couple of seconds when it can't accept commands.
 //
 //#define DISABLE_HOST_KEEPALIVE // Enable this option if your host doesn't like keepalive messages.
+#if DISABLED(DISABLE_HOST_KEEPALIVE)
+  #define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
+#endif

 //
 // M100 Free Memory Watcher
--- a/Marlin/example_configurations/Hephestos_2/Configuration.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration.h
@ -715,9 +715,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // Host Keepalive
 //
 // By default Marlin will send a busy status message to the host
-// every 10 seconds when it can't accept commands.
+// every couple of seconds when it can't accept commands.
 //
 //#define DISABLE_HOST_KEEPALIVE // Enable this option if your host doesn't like keepalive messages.
+#if DISABLED(DISABLE_HOST_KEEPALIVE)
+  #define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
+#endif

 //
 // M100 Free Memory Watcher
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@ -738,9 +738,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // Host Keepalive
 //
 // By default Marlin will send a busy status message to the host
-// every 10 seconds when it can't accept commands.
+// every couple of seconds when it can't accept commands.
 //
 //#define DISABLE_HOST_KEEPALIVE // Enable this option if your host doesn't like keepalive messages.
+#if DISABLED(DISABLE_HOST_KEEPALIVE)
+  #define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
+#endif

 //
 // M100 Free Memory Watcher
--- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
@ -721,9 +721,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // Host Keepalive
 //
 // By default Marlin will send a busy status message to the host
-// every 10 seconds when it can't accept commands.
+// every couple of seconds when it can't accept commands.
 //
 //#define DISABLE_HOST_KEEPALIVE // Enable this option if your host doesn't like keepalive messages.
+#if DISABLED(DISABLE_HOST_KEEPALIVE)
+  #define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
+#endif

 //
 // M100 Free Memory Watcher
--- a/Marlin/example_configurations/RigidBot/Configuration.h
+++ b/Marlin/example_configurations/RigidBot/Configuration.h
@ -716,9 +716,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // Host Keepalive
 //
 // By default Marlin will send a busy status message to the host
-// every 10 seconds when it can't accept commands.
+// every couple of seconds when it can't accept commands.
 //
 //#define DISABLE_HOST_KEEPALIVE // Enable this option if your host doesn't like keepalive messages.
+#if DISABLED(DISABLE_HOST_KEEPALIVE)
+  #define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
+#endif

 //
 // M100 Free Memory Watcher
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@ -729,9 +729,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // Host Keepalive
 //
 // By default Marlin will send a busy status message to the host
-// every 10 seconds when it can't accept commands.
+// every couple of seconds when it can't accept commands.
 //
 //#define DISABLE_HOST_KEEPALIVE // Enable this option if your host doesn't like keepalive messages.
+#if DISABLED(DISABLE_HOST_KEEPALIVE)
+  #define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
+#endif

 //
 // M100 Free Memory Watcher
--- a/Marlin/example_configurations/TAZ4/Configuration.h
+++ b/Marlin/example_configurations/TAZ4/Configuration.h
@ -742,9 +742,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // Host Keepalive
 //
 // By default Marlin will send a busy status message to the host
-// every 10 seconds when it can't accept commands.
+// every couple of seconds when it can't accept commands.
 //
 //#define DISABLE_HOST_KEEPALIVE // Enable this option if your host doesn't like keepalive messages.
+#if DISABLED(DISABLE_HOST_KEEPALIVE)
+  #define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
+#endif

 //
 // M100 Free Memory Watcher
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@ -713,9 +713,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 // Host Keepalive
 //
 // By default Marlin will send a busy status message to the host
-// every 10 seconds when it can't accept commands.
+// every couple of seconds when it can't accept commands.
 //
 //#define DISABLE_HOST_KEEPALIVE // Enable this option if your host doesn't like keepalive messages.
+#if DISABLED(DISABLE_HOST_KEEPALIVE)
+  #define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
+#endif

 //
 // M100 Free Memory Watcher
--- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h
+++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
@ -721,9 +721,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // Host Keepalive
 //
 // By default Marlin will send a busy status message to the host
-// every 10 seconds when it can't accept commands.
+// every couple of seconds when it can't accept commands.
 //
 //#define DISABLE_HOST_KEEPALIVE // Enable this option if your host doesn't like keepalive messages.
+#if DISABLED(DISABLE_HOST_KEEPALIVE)
+  #define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
+#endif

 //
 // M100 Free Memory Watcher
--- a/Marlin/example_configurations/delta/biv2.5/Configuration.h
+++ b/Marlin/example_configurations/delta/biv2.5/Configuration.h
@ -843,9 +843,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 // Host Keepalive
 //
 // By default Marlin will send a busy status message to the host
-// every 10 seconds when it can't accept commands.
+// every couple of seconds when it can't accept commands.
 //
 //#define DISABLE_HOST_KEEPALIVE // Enable this option if your host doesn't like keepalive messages.
+#if DISABLED(DISABLE_HOST_KEEPALIVE)
+  #define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
+#endif

 //
 // M100 Free Memory Watcher
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@ -843,9 +843,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 // Host Keepalive
 //
 // By default Marlin will send a busy status message to the host
-// every 10 seconds when it can't accept commands.
+// every couple of seconds when it can't accept commands.
 //
 //#define DISABLE_HOST_KEEPALIVE // Enable this option if your host doesn't like keepalive messages.
+#if DISABLED(DISABLE_HOST_KEEPALIVE)
+  #define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
+#endif

 //
 // M100 Free Memory Watcher
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@ -847,9 +847,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // Host Keepalive
 //
 // By default Marlin will send a busy status message to the host
-// every 10 seconds when it can't accept commands.
+// every couple of seconds when it can't accept commands.
 //
 //#define DISABLE_HOST_KEEPALIVE // Enable this option if your host doesn't like keepalive messages.
+#if DISABLED(DISABLE_HOST_KEEPALIVE)
+  #define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
+#endif

 //
 // M100 Free Memory Watcher
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
@ -840,9 +840,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // Host Keepalive
 //
 // By default Marlin will send a busy status message to the host
-// every 10 seconds when it can't accept commands.
+// every couple of seconds when it can't accept commands.
 //
 //#define DISABLE_HOST_KEEPALIVE // Enable this option if your host doesn't like keepalive messages.
+#if DISABLED(DISABLE_HOST_KEEPALIVE)
+  #define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
+#endif

 //
 // M100 Free Memory Watcher
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
@ -757,9 +757,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // Host Keepalive
 //
 // By default Marlin will send a busy status message to the host
-// every 10 seconds when it can't accept commands.
+// every couple of seconds when it can't accept commands.
 //
 //#define DISABLE_HOST_KEEPALIVE // Enable this option if your host doesn't like keepalive messages.
+#if DISABLED(DISABLE_HOST_KEEPALIVE)
+  #define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
+#endif

 //
 // M100 Free Memory Watcher
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@ -724,9 +724,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // Host Keepalive
 //
 // By default Marlin will send a busy status message to the host
-// every 10 seconds when it can't accept commands.
+// every couple of seconds when it can't accept commands.
 //
 //#define DISABLE_HOST_KEEPALIVE // Enable this option if your host doesn't like keepalive messages.
+#if DISABLED(DISABLE_HOST_KEEPALIVE)
+  #define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
+#endif

 //
 // M100 Free Memory Watcher
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@ -715,9 +715,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 // Host Keepalive
 //
 // By default Marlin will send a busy status message to the host
-// every 10 seconds when it can't accept commands.
+// every couple of seconds when it can't accept commands.
 //
 //#define DISABLE_HOST_KEEPALIVE // Enable this option if your host doesn't like keepalive messages.
+#if DISABLED(DISABLE_HOST_KEEPALIVE)
+  #define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
+#endif

 //
 // M100 Free Memory Watcher