From 2c2984fd29b2ac6cf7a4301541e903e52179cfed Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 19 Apr 2021 00:07:57 -0500 Subject: [PATCH] Update realtime, DLP comments --- Marlin/Configuration_adv.h | 24 +++++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-) diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index e41d5132a8..e1124edf50 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -2141,8 +2141,19 @@ //#define EMERGENCY_PARSER /** - * Realtime Reporting - * Add support for commands S000 State, P000 Pause, and R000 Resume + * Realtime Reporting (requires EMERGENCY_PARSER) + * + * - Report position and state of the machine (like Grbl). + * - Auto-report position during long moves. + * - Useful for CNC/LASER. + * + * Adds support for commands: + * S000 : Report State and Position while moving. + * P000 : Instant Pause / Hold while moving. + * R000 : Resume from Pause / Hold. + * + * - During Hold all Emergency Parser commands are available, as usual. + * - Enable NANODLP_Z_SYNC and NANODLP_ALL_AXIS for move command end-state reports. */ //#define REALTIME_REPORTING_COMMANDS #if ENABLED(REALTIME_REPORTING_COMMANDS) @@ -3778,14 +3789,13 @@ /** * NanoDLP Sync support * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + * Support for Synchronized Z moves when used with NanoDLP. G0/G1 axis moves will + * output a "Z_move_comp" string to enable synchronization with DLP projector exposure. + * This feature allows you to use [[WaitForDoneMessage]] instead of M400 commands. */ //#define NANODLP_Z_SYNC #if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. + //#define NANODLP_ALL_AXIS // Send a "Z_move_comp" report for any axis move (not just Z). #endif /**