diff --git a/Marlin/src/HAL/HAL_TEENSY35_36/HAL_Servo_Teensy.h b/Marlin/src/HAL/HAL_TEENSY35_36/HAL_Servo_Teensy.h index 5600ae2a1d..78b2092051 100644 --- a/Marlin/src/HAL/HAL_TEENSY35_36/HAL_Servo_Teensy.h +++ b/Marlin/src/HAL/HAL_TEENSY35_36/HAL_Servo_Teensy.h @@ -1,18 +1,18 @@ -#ifndef HAL_Servo_Teensy_h -#define HAL_Servo_Teensy_h +#ifndef _HAL_SERVO_TEENSY_H_ +#define _HAL_SERVO_TEENSY_H_ #include // Inherit and expand on the official library class libServo : public Servo { - public: - int8_t attach(const int pin); - int8_t attach(const int pin, const int min, const int max); - void move(const int value); - private: - uint16_t min_ticks; - uint16_t max_ticks; - uint8_t servoIndex; // index into the channel data for this servo + public: + int8_t attach(const int pin); + int8_t attach(const int pin, const int min, const int max); + void move(const int value); + private: + uint16_t min_ticks; + uint16_t max_ticks; + uint8_t servoIndex; // index into the channel data for this servo }; -#endif // HAL_Servo_Teensy_h +#endif // _HAL_SERVO_TEENSY_H_ diff --git a/Marlin/src/HAL/HAL_endstop_interrupts.h b/Marlin/src/HAL/HAL_endstop_interrupts.h index 45635179a5..5f39e55d78 100644 --- a/Marlin/src/HAL/HAL_endstop_interrupts.h +++ b/Marlin/src/HAL/HAL_endstop_interrupts.h @@ -45,7 +45,7 @@ void endstop_ISR(void) { endstop_ISR_worker(); } #elif IS_32BIT_TEENSY #include "HAL_TEENSY35_36/endstop_interrupts.h" - + #elif defined(STM32F7) #include "HAL_STM32F7/endstop_interrupts.h" diff --git a/Marlin/src/core/serial.h b/Marlin/src/core/serial.h index 5606f47720..246f5da36d 100644 --- a/Marlin/src/core/serial.h +++ b/Marlin/src/core/serial.h @@ -97,13 +97,13 @@ extern const char errormagic[] PROGMEM; #endif #define SERIAL_EOL_P(p) SERIAL_CHAR_P(p,'\n') - + #define SERIAL_PROTOCOLCHAR_P(p,x) SERIAL_CHAR_P(p,x) #define SERIAL_PROTOCOLPGM_P(p,x) (serialprintPGM_P(p,PSTR(x))) #define SERIAL_PROTOCOLLNPGM_P(p,x) (serialprintPGM_P(p,PSTR(x "\n"))) #define SERIAL_PROTOCOLPAIR_P(p, pre, value) (serial_echopair_PGM_P(p,PSTR(pre),(value))) #define SERIAL_PROTOCOLLNPAIR_P(p, pre, value) do { SERIAL_PROTOCOLPAIR_P(p, pre, value); SERIAL_EOL_P(p); } while(0) - + #define SERIAL_ECHO_START_P(p) (serialprintPGM_P(p,echomagic)) #define SERIAL_ECHO_P(p,x) SERIAL_PROTOCOL_P(p,x) #define SERIAL_ECHOPGM_P(p,x) SERIAL_PROTOCOLPGM_P(p,x) @@ -112,13 +112,13 @@ extern const char errormagic[] PROGMEM; #define SERIAL_ECHOPAIR_P(p,pre,value) SERIAL_PROTOCOLPAIR_P(p, pre, value) #define SERIAL_ECHOLNPAIR_P(p,pre, value) SERIAL_PROTOCOLLNPAIR_P(p, pre, value) #define SERIAL_ECHO_F_P(p,x,y) SERIAL_PROTOCOL_F_P(p,x,y) - + #define SERIAL_ERROR_START_P(p) (serialprintPGM_P(p,errormagic)) #define SERIAL_ERROR_P(p,x) SERIAL_PROTOCOL_P(p,x) #define SERIAL_ERRORPGM_P(p,x) SERIAL_PROTOCOLPGM_P(p,x) #define SERIAL_ERRORLN_P(p,x) SERIAL_PROTOCOLLN_P(p,x) #define SERIAL_ERRORLNPGM_P(p,x) SERIAL_PROTOCOLLNPGM_P(p,x) - + // These macros compensate for float imprecision #define SERIAL_PROTOCOLPAIR_F_P(p, pre, value) SERIAL_PROTOCOLPAIR_P(p, pre, FIXFLOAT(value)) #define SERIAL_PROTOCOLLNPAIR_F_P(p, pre, value) SERIAL_PROTOCOLLNPAIR_P(p, pre, FIXFLOAT(value)) @@ -149,7 +149,7 @@ extern const char errormagic[] PROGMEM; #define SERIAL_PROTOCOL_F_P(p,x,y) SERIAL_PROTOCOL_F(x,y) #define SERIAL_PROTOCOLLN_P(p,x) SERIAL_PROTOCOLLN(x) #define SERIAL_PRINT_P(p,x,b) SERIAL_PRINT(x,b) - #define SERIAL_PRINTLN_P(p,x,b) SERIAL_PRINTLN(x,b) + #define SERIAL_PRINTLN_P(p,x,b) SERIAL_PRINTLN(x,b) #define SERIAL_PRINTF_P(p,args...) SERIAL_PRINTF(args) #define SERIAL_CHAR(x) MYSERIAL0.write(x) @@ -168,13 +168,13 @@ extern const char errormagic[] PROGMEM; #endif #define SERIAL_EOL_P(p) SERIAL_EOL() - + #define SERIAL_PROTOCOLCHAR_P(p,x) SERIAL_PROTOCOLCHAR(x) #define SERIAL_PROTOCOLPGM_P(p,x) SERIAL_PROTOCOLPGM(x) #define SERIAL_PROTOCOLLNPGM_P(p,x) SERIAL_PROTOCOLLNPGM(x) #define SERIAL_PROTOCOLPAIR_P(p, pre, value) SERIAL_PROTOCOLPAIR(pre, value) #define SERIAL_PROTOCOLLNPAIR_P(p, pre, value) SERIAL_PROTOCOLLNPAIR(pre, value) - + #define SERIAL_ECHO_START_P(p) SERIAL_ECHO_START() #define SERIAL_ECHO_P(p,x) SERIAL_ECHO(x) #define SERIAL_ECHOPGM_P(p,x) SERIAL_ECHOPGM(x) @@ -183,13 +183,13 @@ extern const char errormagic[] PROGMEM; #define SERIAL_ECHOPAIR_P(p,pre,value) SERIAL_ECHOPAIR(pre, value) #define SERIAL_ECHOLNPAIR_P(p,pre, value) SERIAL_ECHOLNPAIR(pre, value) #define SERIAL_ECHO_F_P(p,x,y) SERIAL_ECHO_F(x,y) - + #define SERIAL_ERROR_START_P(p) SERIAL_ERROR_START() #define SERIAL_ERROR_P(p,x) SERIAL_ERROR(x) #define SERIAL_ERRORPGM_P(p,x) SERIAL_ERRORPGM(x) #define SERIAL_ERRORLN_P(p,x) SERIAL_ERRORLN(x) #define SERIAL_ERRORLNPGM_P(p,x) SERIAL_ERRORLNPGM(x) - + // These macros compensate for float imprecision #define SERIAL_PROTOCOLPAIR_F_P(p, pre, value) SERIAL_PROTOCOLPAIR_F(pre, value) #define SERIAL_PROTOCOLLNPAIR_F_P(p, pre, value) SERIAL_PROTOCOLLNPAIR_F(pre, value) diff --git a/Marlin/src/gcode/feature/trinamic/M122.cpp b/Marlin/src/gcode/feature/trinamic/M122.cpp index f079b39c08..42899613d3 100644 --- a/Marlin/src/gcode/feature/trinamic/M122.cpp +++ b/Marlin/src/gcode/feature/trinamic/M122.cpp @@ -31,7 +31,7 @@ * M122: Debug TMC drivers */ void GcodeSuite::M122() { - if (parser.seen('S')) + if (parser.seen('S')) tmc_set_report_status(parser.value_bool()); else tmc_report_all(); diff --git a/Marlin/src/gcode/queue.cpp b/Marlin/src/gcode/queue.cpp index 11fd46fa75..8e5985e7ae 100644 --- a/Marlin/src/gcode/queue.cpp +++ b/Marlin/src/gcode/queue.cpp @@ -254,7 +254,7 @@ static bool serial_data_available() { static int read_serial(const int index) { switch (index) { case 0: return MYSERIAL0.read(); - #if NUM_SERIAL > 1 + #if NUM_SERIAL > 1 case 1: return MYSERIAL1.read(); #endif default: return -1; diff --git a/Marlin/src/gcode/sdcard/M20-M30_M32-M34_M928.cpp b/Marlin/src/gcode/sdcard/M20-M30_M32-M34_M928.cpp index 993e328d21..9e4b7e96db 100644 --- a/Marlin/src/gcode/sdcard/M20-M30_M32-M34_M928.cpp +++ b/Marlin/src/gcode/sdcard/M20-M30_M32-M34_M928.cpp @@ -109,7 +109,7 @@ void GcodeSuite::M26() { /** * M27: Get SD Card status */ -void GcodeSuite::M27() { +void GcodeSuite::M27() { card.getStatus( #if NUM_SERIAL > 1 command_queue_port[cmd_queue_index_r] diff --git a/Marlin/src/pins/pins_THE_BORG.h b/Marlin/src/pins/pins_THE_BORG.h index 1b1c873b9f..269c0eae3f 100644 --- a/Marlin/src/pins/pins_THE_BORG.h +++ b/Marlin/src/pins/pins_THE_BORG.h @@ -73,7 +73,7 @@ #define STEPPER_ENABLE_PIN _STM32_PIN(PORTE, 0) -#define X_STEP_PIN _STM32_PIN(PORTC, 6) //96, 39 in arduino +#define X_STEP_PIN _STM32_PIN(PORTC, 6) //96, 39 in arduino #define X_DIR_PIN _STM32_PIN(PORTC, 7) #define X_ENABLE_PIN _STM32_PIN(PORTC, 8) @@ -111,17 +111,17 @@ -#define SCK_PIN _STM32_PIN(PORTA, 5) -#define MISO_PIN _STM32_PIN(PORTA, 6) -#define MOSI_PIN _STM32_PIN(PORTA, 7) +#define SCK_PIN _STM32_PIN(PORTA, 5) +#define MISO_PIN _STM32_PIN(PORTA, 6) +#define MOSI_PIN _STM32_PIN(PORTA, 7) -#define SPI1_SCK_PIN _STM32_PIN(PORTA, 5) -#define SPI1_MISO_PIN _STM32_PIN(PORTA, 6) -#define SPI1_MOSI_PIN _STM32_PIN(PORTA, 7) +#define SPI1_SCK_PIN _STM32_PIN(PORTA, 5) +#define SPI1_MISO_PIN _STM32_PIN(PORTA, 6) +#define SPI1_MOSI_PIN _STM32_PIN(PORTA, 7) -#define SPI6_SCK_PIN _STM32_PIN(PORTG, 13) -#define SPI6_MISO_PIN _STM32_PIN(PORTG, 12) -#define SPI6_MOSI_PIN _STM32_PIN(PORTG, 14) +#define SPI6_SCK_PIN _STM32_PIN(PORTG, 13) +#define SPI6_MISO_PIN _STM32_PIN(PORTG, 12) +#define SPI6_MOSI_PIN _STM32_PIN(PORTG, 14) @@ -130,36 +130,36 @@ // Temperature Sensors // -#define TEMP_0_PIN _STM32_PIN(PORTC, 3) // Analog Input -#define TEMP_1_PIN _STM32_PIN(PORTC, 2) // Analog Input -#define TEMP_2_PIN _STM32_PIN(PORTC, 1) // Analog Input -#define TEMP_3_PIN _STM32_PIN(PORTC, 0) // Analog Input +#define TEMP_0_PIN _STM32_PIN(PORTC, 3) // Analog Input +#define TEMP_1_PIN _STM32_PIN(PORTC, 2) // Analog Input +#define TEMP_2_PIN _STM32_PIN(PORTC, 1) // Analog Input +#define TEMP_3_PIN _STM32_PIN(PORTC, 0) // Analog Input -#define TEMP_BED_PIN _STM32_PIN(PORTF, 10) // Analog Input +#define TEMP_BED_PIN _STM32_PIN(PORTF, 10) // Analog Input -#define TEMP_5_PIN _STM32_PIN(PORTE, 12) // Analog Input, Probe temp +#define TEMP_5_PIN _STM32_PIN(PORTE, 12) // Analog Input, Probe temp // // Heaters / Fans // -#define HEATER_0_PIN _STM32_PIN(PORTD, 15) -#define HEATER_1_PIN _STM32_PIN(PORTD, 14) -#define HEATER_BED_PIN _STM32_PIN(PORTF, 6) +#define HEATER_0_PIN _STM32_PIN(PORTD, 15) +#define HEATER_1_PIN _STM32_PIN(PORTD, 14) +#define HEATER_BED_PIN _STM32_PIN(PORTF, 6) -#define FAN_PIN _STM32_PIN(PORTD, 13) -#define FAN1_PIN _STM32_PIN(PORTA, 0) -#define FAN2_PIN _STM32_PIN(PORTA, 1) +#define FAN_PIN _STM32_PIN(PORTD, 13) +#define FAN1_PIN _STM32_PIN(PORTA, 0) +#define FAN2_PIN _STM32_PIN(PORTA, 1) -//#define E0_AUTO_FAN_PIN _STM32_PIN(PORTA, 1) +//#define E0_AUTO_FAN_PIN _STM32_PIN(PORTA, 1) // // Misc. Functions // -//#define CASE_LIGHT_PIN_CI _STM32_PIN(PORTF, 13) // -//#define CASE_LIGHT_PIN_DO _STM32_PIN(PORTF, 14) // -//#define NEOPIXEL_PIN _STM32_PIN(PORTF, 13) +//#define CASE_LIGHT_PIN_CI _STM32_PIN(PORTF, 13) // +//#define CASE_LIGHT_PIN_DO _STM32_PIN(PORTF, 14) // +//#define NEOPIXEL_PIN _STM32_PIN(PORTF, 13) // // Prusa i3 MK2 Multi Material Multiplexer Support @@ -172,37 +172,37 @@ // Servos // -#define SERVO0_PIN _STM32_PIN(PORTE, 13) -#define SERVO1_PIN _STM32_PIN(PORTE, 14) +#define SERVO0_PIN _STM32_PIN(PORTE, 13) +#define SERVO1_PIN _STM32_PIN(PORTE, 14) #define SDSS _STM32_PIN(PORTA, 8) -#define SS_PIN _STM32_PIN(PORTA, 8) -#define LED_PIN _STM32_PIN(PORTA, 2) //Alive +#define SS_PIN _STM32_PIN(PORTA, 8) +#define LED_PIN _STM32_PIN(PORTA, 2) //Alive #define PS_ON_PIN _STM32_PIN(PORTA, 3) -#define KILL_PIN -1//_STM32_PIN(PORTD, 5) //EXP2-10 -#define PWR_LOSS _STM32_PIN(PORTG, 5) //Power loss / nAC_FAULT +#define KILL_PIN -1//_STM32_PIN(PORTD, 5) //EXP2-10 +#define PWR_LOSS _STM32_PIN(PORTG, 5) //Power loss / nAC_FAULT // //MAX7219_DEBUG // -#define MAX7219_CLK_PIN _STM32_PIN(PORTG, 10) //EXP1-1 -#define MAX7219_DIN_PIN _STM32_PIN(PORTD, 7) //EXP1-3 -#define MAX7219_LOAD_PIN _STM32_PIN(PORTD, 1) //EXP1-5 +#define MAX7219_CLK_PIN _STM32_PIN(PORTG, 10) //EXP1-1 +#define MAX7219_DIN_PIN _STM32_PIN(PORTD, 7) //EXP1-3 +#define MAX7219_LOAD_PIN _STM32_PIN(PORTD, 1) //EXP1-5 //#define NEOPIXEL_PIN 4 // // LCD / Controller // -//#define SD_DETECT_PIN -1 //_STM32_PIN(PORTB, 6)) //EXP2-4 -#define BEEPER_PIN _STM32_PIN(PORTG, 10) //EXP1-1 -#define LCD_PINS_RS _STM32_PIN(PORTG, 9) //EXP1-4 -#define LCD_PINS_ENABLE _STM32_PIN(PORTD, 7) //EXP1-3 -#define LCD_PINS_D4 _STM32_PIN(PORTD, 1) //EXP1-5 -#define LCD_PINS_D5 _STM32_PIN(PORTF, 0) //EXP1-6 -#define LCD_PINS_D6 _STM32_PIN(PORTD, 3) //EXP1-7 -#define LCD_PINS_D7 _STM32_PIN(PORTD, 4) //EXP1-8 -#define BTN_EN1 _STM32_PIN(PORTD, 6) //EXP2-5 -#define BTN_EN2 _STM32_PIN(PORTD, 0) //EXP2-3 -#define BTN_ENC _STM32_PIN(PORTG, 11) //EXP1-2 +//#define SD_DETECT_PIN -1 //_STM32_PIN(PORTB, 6)) //EXP2-4 +#define BEEPER_PIN _STM32_PIN(PORTG, 10) //EXP1-1 +#define LCD_PINS_RS _STM32_PIN(PORTG, 9) //EXP1-4 +#define LCD_PINS_ENABLE _STM32_PIN(PORTD, 7) //EXP1-3 +#define LCD_PINS_D4 _STM32_PIN(PORTD, 1) //EXP1-5 +#define LCD_PINS_D5 _STM32_PIN(PORTF, 0) //EXP1-6 +#define LCD_PINS_D6 _STM32_PIN(PORTD, 3) //EXP1-7 +#define LCD_PINS_D7 _STM32_PIN(PORTD, 4) //EXP1-8 +#define BTN_EN1 _STM32_PIN(PORTD, 6) //EXP2-5 +#define BTN_EN2 _STM32_PIN(PORTD, 0) //EXP2-3 +#define BTN_ENC _STM32_PIN(PORTG, 11) //EXP1-2