Tweak Marlin headers, comments

Marlin/src/HAL/HAL_AVR/HAL.cpp

@@ -1,24 +1,24 @@
-/* **************************************************************************
-
- Marlin 3D Printer Firmware
- Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
-
- Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-****************************************************************************/
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
 
 #ifdef __AVR__
 

Marlin/src/HAL/HAL_STM32/pinsDebug.h

@@ -1 +1 @@
-#error "Debug pins is not yet supported for STM32!"
+#error "PINS_DEBUGGING is not yet supported for STM32!"

Marlin/src/HAL/HAL_TEENSY31_32/HAL_Servo_Teensy.cpp

@@ -1,3 +1,24 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
 #ifdef __MK20DX256__
 
 #include "../../inc/MarlinConfig.h"

Marlin/src/HAL/HAL_TEENSY31_32/HAL_timers_Teensy.cpp

@@ -20,7 +20,6 @@
  *
  */
 
-
 /**
  * Teensy3.2 __MK20DX256__
  */

Marlin/src/HAL/HAL_TEENSY31_32/HAL_timers_Teensy.h

@@ -1,23 +1,24 @@
-/* **************************************************************************
-
- Marlin 3D Printer Firmware
- Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
- Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program.  If not, see <http://www.gnu.org/licenses/>.
-****************************************************************************/
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
 
 /**
  * Description: HAL for

Marlin/src/HAL/HAL_TEENSY31_32/pinsDebug.h

@@ -1 +1 @@
-#error "Debug pins is not supported on the Teensy 3.1 / 3.2 Platform!"
+#error "PINS_DEBUGGING is not yet supported for Teensy 3.1 / 3.2!"