From 2af9e2f759a8950497a00d7152fefb6203c15f48 Mon Sep 17 00:00:00 2001 From: makerbase <4164049@qq.com> Date: Thu, 10 Sep 2020 10:48:42 +0800 Subject: [PATCH] MKS Gen L V2.1 (#19314) --- Marlin/Makefile | 8 +- Marlin/src/core/boards.h | 7 +- Marlin/src/pins/pins.h | 2 + Marlin/src/pins/ramps/pins_MKS_GEN_L_V21.h | 85 ++++++++++++++++++++++ 4 files changed, 96 insertions(+), 6 deletions(-) create mode 100644 Marlin/src/pins/ramps/pins_MKS_GEN_L_V21.h diff --git a/Marlin/Makefile b/Marlin/Makefile index 5ab0d1eefd..9f2d18d268 100644 --- a/Marlin/Makefile +++ b/Marlin/Makefile @@ -268,12 +268,14 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1148) else ifeq ($(HARDWARE_MOTHERBOARD),1149) # MKS GEN L V2 else ifeq ($(HARDWARE_MOTHERBOARD),1150) -# Copymaster 3D +# MKS GEN L V2.1 else ifeq ($(HARDWARE_MOTHERBOARD),1151) -# Ortur 4 +# Copymaster 3D else ifeq ($(HARDWARE_MOTHERBOARD),1152) -# Tenlog D3 Hero +# Ortur 4 else ifeq ($(HARDWARE_MOTHERBOARD),1153) +# Tenlog D3 Hero +else ifeq ($(HARDWARE_MOTHERBOARD),1154) # # RAMBo and derivatives diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index e10c493097..b933147121 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -104,9 +104,10 @@ #define BOARD_HJC2560C_REV2 1148 // ADIMLab Gantry v2 #define BOARD_TANGO 1149 // BIQU Tango V1 #define BOARD_MKS_GEN_L_V2 1150 // MKS GEN L V2 -#define BOARD_COPYMASTER_3D 1151 // Copymaster 3D -#define BOARD_ORTUR_4 1152 // Ortur 4 -#define BOARD_TENLOG_D3_HERO 1153 // Tenlog D3 Hero IDEX printer +#define BOARD_MKS_GEN_L_V21 1151 // MKS GEN L V2.1 +#define BOARD_COPYMASTER_3D 1152 // Copymaster 3D +#define BOARD_ORTUR_4 1153 // Ortur 4 +#define BOARD_TENLOG_D3_HERO 1154 // Tenlog D3 Hero IDEX printer // // RAMBo and derivatives diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index 7aff582c6d..9dce52b420 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -196,6 +196,8 @@ #include "ramps/pins_ORTUR_4.h" // ATmega2560 env:mega2560 #elif MB(TENLOG_D3_HERO) #include "ramps/pins_TENLOG_D3_HERO.h" // ATmega2560 env:mega2560 +#elif MB(MKS_GEN_L_V21) + #include "ramps/pins_MKS_GEN_L_V21.h" // ATmega2560 env:mega2560 // // RAMBo and derivatives diff --git a/Marlin/src/pins/ramps/pins_MKS_GEN_L_V21.h b/Marlin/src/pins/ramps/pins_MKS_GEN_L_V21.h new file mode 100644 index 0000000000..24e04a39ff --- /dev/null +++ b/Marlin/src/pins/ramps/pins_MKS_GEN_L_V21.h @@ -0,0 +1,85 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * MKS GEN L V2 – Arduino Mega2560 with RAMPS v1.4 pin assignments + */ + +#if HOTENDS > 2 || E_STEPPERS > 2 + #error "MKS GEN L V2.1 supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "MKS GEN L V2.1" + +// +// Heaters / Fans +// +// Power outputs EFBF or EFBE +#define MOSFET_D_PIN 7 + +// +// CS Pins wired to avoid conflict with the LCD +// See https://www.thingiverse.com/asset:66604 +// + +#ifndef X_CS_PIN + #define X_CS_PIN 63 +#endif +#ifndef Y_CS_PIN + #define Y_CS_PIN 64 +#endif +#ifndef Z_CS_PIN + #define Z_CS_PIN 65 +#endif +#ifndef E0_CS_PIN + #define E0_CS_PIN 66 +#endif +#ifndef E1_CS_PIN + #define E1_CS_PIN 12 +#endif + +// TMC2130 Diag Pins (currently just for reference) +#define X_DIAG_PIN 3 +#define Y_DIAG_PIN 14 +#define Z_DIAG_PIN 18 +#define E0_DIAG_PIN 2 +#define E1_DIAG_PIN 15 + +#ifndef SERVO1_PIN + #define SERVO1_PIN 21 +#endif +#ifndef SERVO2_PIN + #define SERVO2_PIN 39 +#endif +#ifndef SERVO3_PIN + #define SERVO3_PIN 32 +#endif + +#ifndef E1_SERIAL_TX_PIN + #define E1_SERIAL_TX_PIN 20 +#endif +#ifndef E1_SERIAL_RX_PIN + #define E1_SERIAL_RX_PIN 12 +#endif + +#include "pins_RAMPS.h"