From 29097b0ab228840090d9be0364cfa1d1fd4ef0df Mon Sep 17 00:00:00 2001 From: kieranc Date: Mon, 23 Feb 2015 09:41:25 +0100 Subject: [PATCH] Enable PID debugging for heated bed --- Marlin/example_configurations/makibox/Configuration.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h index 99feceba8c..788f3b2271 100644 --- a/Marlin/example_configurations/makibox/Configuration.h +++ b/Marlin/example_configurations/makibox/Configuration.h @@ -225,6 +225,8 @@ Here are some standard links for getting your machine calibrated: // to increase the heat up rate. However, if changed, user must be aware of the safety concerns // of drawing too much current from the power supply. +//#define PID_BED_DEBUG // Sends debug data to the serial port. + #ifdef PIDTEMPBED //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)