XY_TRAVEL_SPEED => XY_PROBE_SPEED

Marlin/Conditionals.h

@@ -371,15 +371,6 @@
     #define MAX_PROBE_X (min(X_MAX_POS, X_MAX_POS + X_PROBE_OFFSET_FROM_EXTRUDER))
     #define MIN_PROBE_Y (max(Y_MIN_POS, Y_MIN_POS + Y_PROBE_OFFSET_FROM_EXTRUDER))
     #define MAX_PROBE_Y (min(Y_MAX_POS, Y_MAX_POS + Y_PROBE_OFFSET_FROM_EXTRUDER))
-
-    #ifndef XY_TRAVEL_SPEED
-      #ifdef HOMING_FEEDRATE_XYZ
-        #define XY_TRAVEL_SPEED HOMING_FEEDRATE_XYZ
-      #else
-        #define XY_TRAVEL_SPEED 4000
-      #endif
-    #endif
-
   #endif
 
   #define HAS_Z_SERVO_ENDSTOP (defined(Z_ENDSTOP_SERVO_NR) && Z_ENDSTOP_SERVO_NR >= 0)
@@ -784,8 +775,12 @@
     #ifndef Z_PROBE_OFFSET_RANGE_MAX
       #define Z_PROBE_OFFSET_RANGE_MAX 20
     #endif
-    #ifndef XY_TRAVEL_SPEED
+    #ifndef XY_PROBE_SPEED
-      #define XY_TRAVEL_SPEED 4000
+      #ifdef HOMING_FEEDRATE_XYZ
+        #define XY_PROBE_SPEED HOMING_FEEDRATE_XYZ
+      #else
+        #define XY_PROBE_SPEED 4000
+      #endif
     #endif
   #endif
 

Marlin/Configuration.h

@@ -667,7 +667,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
+  #define XY_PROBE_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
 
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 

Marlin/Marlin_main.cpp

@@ -367,11 +367,11 @@ static uint8_t target_extruder;
 #endif
 
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)
-  int xy_travel_speed = XY_TRAVEL_SPEED;
+  int xy_probe_speed = XY_PROBE_SPEED;
   bool bed_leveling_in_progress = false;
-  #define XY_TRAVEL_FEEDRATE xy_travel_speed
+  #define XY_PROBE_FEEDRATE xy_probe_speed
 #else
-  #define XY_TRAVEL_FEEDRATE (min(planner.max_feedrate[X_AXIS], planner.max_feedrate[Y_AXIS]) * 60)
+  #define XY_PROBE_FEEDRATE (min(planner.max_feedrate[X_AXIS], planner.max_feedrate[Y_AXIS]) * 60)
 #endif
 
 #if ENABLED(Z_DUAL_ENDSTOPS) && DISABLED(DELTA)
@@ -1636,7 +1636,7 @@ static void setup_for_endstop_move() {
 
     #if ENABLED(DELTA)
 
-      feedrate = XY_TRAVEL_FEEDRATE;
+      feedrate = XY_PROBE_FEEDRATE;
 
       destination[X_AXIS] = x;
       destination[Y_AXIS] = y;
@@ -1655,7 +1655,7 @@ static void setup_for_endstop_move() {
       line_to_current_position();
       stepper.synchronize();
 
-      feedrate = XY_TRAVEL_FEEDRATE;
+      feedrate = XY_PROBE_FEEDRATE;
 
       current_position[X_AXIS] = x;
       current_position[Y_AXIS] = y;
@@ -2973,7 +2973,7 @@ inline void gcode_G28() {
             destination[Y_AXIS] = round(Z_SAFE_HOMING_Y_POINT - (Y_PROBE_OFFSET_FROM_EXTRUDER));
             destination[Z_AXIS] = current_position[Z_AXIS]; //z is already at the right height
 
-            feedrate = XY_TRAVEL_FEEDRATE;
+            feedrate = XY_PROBE_FEEDRATE;
 
             #if ENABLED(DEBUG_LEVELING_FEATURE)
               if (DEBUGGING(LEVELING)) {
@@ -3395,7 +3395,7 @@ inline void gcode_G28() {
         }
       #endif
 
-      xy_travel_speed = code_seen('S') ? (int)code_value_linear_units() : XY_TRAVEL_SPEED;
+      xy_probe_speed = code_seen('S') ? (int)code_value_linear_units() : XY_PROBE_SPEED;
 
       int left_probe_bed_position = code_seen('L') ? (int)code_value_axis_units(X_AXIS) : LEFT_PROBE_BED_POSITION,
           right_probe_bed_position = code_seen('R') ? (int)code_value_axis_units(X_AXIS) : RIGHT_PROBE_BED_POSITION,
@@ -6556,8 +6556,8 @@ inline void gcode_T(uint8_t tmp_extruder) {
     }
     else {
       feedrate =
-        #ifdef XY_TRAVEL_SPEED
+        #ifdef XY_PROBE_SPEED
-          XY_TRAVEL_SPEED
+          XY_PROBE_SPEED
         #else
           min(planner.max_feedrate[X_AXIS], planner.max_feedrate[Y_AXIS]) * 60
         #endif

Marlin/SanityCheck.h

@@ -623,6 +623,8 @@
   #error "SERVO_ENDSTOP_ANGLES is deprecated. Use Z_SERVO_ANGLES instead."
 #elif defined(X_ENDSTOP_SERVO_NR) || defined(Y_ENDSTOP_SERVO_NR)
   #error "X_ENDSTOP_SERVO_NR and Y_ENDSTOP_SERVO_NR are deprecated and should be removed."
+#elif defined(XY_TRAVEL_SPEED)
+  #error "XY_TRAVEL_SPEED is deprecated. Use XY_PROBE_SPEED instead."
 #endif
 
 #endif //SANITYCHECK_H

Marlin/example_configurations/Cartesio/Configuration.h

@@ -666,7 +666,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
+  #define XY_PROBE_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
 
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 

Marlin/example_configurations/Felix/Configuration.h

@@ -649,7 +649,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
+  #define XY_PROBE_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
 
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 

Marlin/example_configurations/Felix/DUAL/Configuration.h

@@ -647,7 +647,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
+  #define XY_PROBE_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
 
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 

Marlin/example_configurations/Hephestos/Configuration.h

@@ -659,7 +659,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
+  #define XY_PROBE_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
 
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 

Marlin/example_configurations/Hephestos_2/Configuration.h

@@ -661,7 +661,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
+  #define XY_PROBE_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
 
   #define Z_RAISE_BETWEEN_PROBINGS 2  // How much the Z axis will be raised when traveling from between next probing points.
 

Marlin/example_configurations/K8200/Configuration.h

@@ -684,7 +684,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
+  #define XY_PROBE_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
 
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

@@ -667,7 +667,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
+  #define XY_PROBE_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
 
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 

Marlin/example_configurations/RigidBot/Configuration.h

@@ -661,7 +661,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
+  #define XY_PROBE_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
 
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 

Marlin/example_configurations/SCARA/Configuration.h

@@ -675,7 +675,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
+  #define XY_PROBE_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
 
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 

Marlin/example_configurations/TAZ4/Configuration.h

@@ -688,7 +688,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
+  #define XY_PROBE_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
 
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 

Marlin/example_configurations/WITBOX/Configuration.h

@@ -659,7 +659,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
+  #define XY_PROBE_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
 
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 

Marlin/example_configurations/adafruit/ST7565/Configuration.h

@@ -667,7 +667,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
+  #define XY_PROBE_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
 
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 

Marlin/example_configurations/delta/biv2.5/Configuration.h

@@ -510,32 +510,32 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
   #define Z_PROBE_ALLEN_KEY_DEPLOY_1_X -105.00 // Move left but not quite so far that we'll bump the belt
   #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y 0.00
   #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0
-  #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_TRAVEL_SPEED
+  #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED
 
   #define Z_PROBE_ALLEN_KEY_DEPLOY_2_X -110.00 // Move outward to position deploy pin to the left of the arm
   #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y -125.00
   #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0
-  #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE XY_TRAVEL_SPEED
+  #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE XY_PROBE_SPEED
 
   #define Z_PROBE_ALLEN_KEY_DEPLOY_3_X 45.00 // Move right to trigger deploy pin
   #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Y -125.00
   #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Z 100.0
-  #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE (XY_TRAVEL_SPEED)/2
+  #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE (XY_PROBE_SPEED)/2
 
   #define Z_PROBE_ALLEN_KEY_STOW_1_X 36.00 // Line up with bed retaining clip
   #define Z_PROBE_ALLEN_KEY_STOW_1_Y -122.00
   #define Z_PROBE_ALLEN_KEY_STOW_1_Z 75.0
-  #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_TRAVEL_SPEED
+  #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED
 
   #define Z_PROBE_ALLEN_KEY_STOW_2_X 36.00 // move down to retract probe
   #define Z_PROBE_ALLEN_KEY_STOW_2_Y -122.00
   #define Z_PROBE_ALLEN_KEY_STOW_2_Z 25.0
-  #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_TRAVEL_SPEED)/2
+  #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED)/2
 
   #define Z_PROBE_ALLEN_KEY_STOW_3_X 0.0  // return to 0,0,100
   #define Z_PROBE_ALLEN_KEY_STOW_3_Y 0.0
   #define Z_PROBE_ALLEN_KEY_STOW_3_Z 100.0
-  #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_TRAVEL_SPEED
+  #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_SPEED
 
 #endif // Z_PROBE_ALLEN_KEY
 
@@ -750,7 +750,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 4000         // X and Y axis travel speed between probes, in mm/min.
+  #define XY_PROBE_SPEED 4000         // X and Y axis travel speed between probes, in mm/min.
 
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 

Marlin/example_configurations/delta/generic/Configuration.h

@@ -509,27 +509,27 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
   #define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 30.0
   #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y DELTA_PRINTABLE_RADIUS
   #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0
-  #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_TRAVEL_SPEED
+  #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED
 
   #define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0
   #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y DELTA_PRINTABLE_RADIUS
   #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0
-  #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_TRAVEL_SPEED)/10
+  #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_SPEED)/10
 
   #define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0 // Move the probe into position
   #define Z_PROBE_ALLEN_KEY_STOW_1_Y 56.0
   #define Z_PROBE_ALLEN_KEY_STOW_1_Z 23.0
-  #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_TRAVEL_SPEED
+  #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED
 
   #define Z_PROBE_ALLEN_KEY_STOW_2_X -64.0 // Push it down
   #define Z_PROBE_ALLEN_KEY_STOW_2_Y 56.0
   #define Z_PROBE_ALLEN_KEY_STOW_2_Z 3.0
-  #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_TRAVEL_SPEED)/10
+  #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED)/10
 
   #define Z_PROBE_ALLEN_KEY_STOW_3_X -64.0 // Move it up to clear
   #define Z_PROBE_ALLEN_KEY_STOW_3_Y 56.0
   #define Z_PROBE_ALLEN_KEY_STOW_3_Z 50.0
-  #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_TRAVEL_SPEED
+  #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_SPEED
 
 #endif // Z_PROBE_ALLEN_KEY
 
@@ -744,7 +744,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 4000         // X and Y axis travel speed between probes, in mm/min.
+  #define XY_PROBE_SPEED 4000         // X and Y axis travel speed between probes, in mm/min.
 
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points
 

Marlin/example_configurations/delta/kossel_mini/Configuration.h

@@ -510,29 +510,29 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 30.0
   #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y DELTA_PRINTABLE_RADIUS
   #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0
-  #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_TRAVEL_SPEED
+  #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED
 
   #define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0
   #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y DELTA_PRINTABLE_RADIUS
   #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0
-  #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_TRAVEL_SPEED/10)
+  #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_SPEED/10)
 
   #define Z_PROBE_ALLEN_KEY_STOW_DEPTH 20
   // Move the probe into position
   #define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0
   #define Z_PROBE_ALLEN_KEY_STOW_1_Y 56.0
   #define Z_PROBE_ALLEN_KEY_STOW_1_Z 23.0
-  #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_TRAVEL_SPEED
+  #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED
   // Move the nozzle down further to push the probe into retracted position.
   #define Z_PROBE_ALLEN_KEY_STOW_2_X  Z_PROBE_ALLEN_KEY_STOW_1_X
   #define Z_PROBE_ALLEN_KEY_STOW_2_Y  Z_PROBE_ALLEN_KEY_STOW_1_Y
   #define Z_PROBE_ALLEN_KEY_STOW_2_Z  (Z_PROBE_ALLEN_KEY_STOW_1_Z-Z_PROBE_ALLEN_KEY_STOW_DEPTH)
-  #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_TRAVEL_SPEED/10)
+  #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED/10)
   // Raise things back up slightly so we don't bump into anything
   #define Z_PROBE_ALLEN_KEY_STOW_3_X  Z_PROBE_ALLEN_KEY_STOW_2_X
   #define Z_PROBE_ALLEN_KEY_STOW_3_Y  Z_PROBE_ALLEN_KEY_STOW_2_Y
   #define Z_PROBE_ALLEN_KEY_STOW_3_Z  (Z_PROBE_ALLEN_KEY_STOW_1_Z+Z_PROBE_ALLEN_KEY_STOW_DEPTH)
-  #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE (XY_TRAVEL_SPEED/2)
+  #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE (XY_PROBE_SPEED/2)
 
 #endif // Z_PROBE_ALLEN_KEY
 
@@ -747,7 +747,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 4000         // X and Y axis travel speed between probes, in mm/min.
+  #define XY_PROBE_SPEED 4000         // X and Y axis travel speed between probes, in mm/min.
 
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points
 

Marlin/example_configurations/delta/kossel_pro/Configuration.h

@@ -501,32 +501,32 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define Z_PROBE_ALLEN_KEY_DEPLOY_1_X -105.00 // Move left but not quite so far that we'll bump the belt
   #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y 0.00
   #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0
-  #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_TRAVEL_SPEED
+  #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED
 
   #define Z_PROBE_ALLEN_KEY_DEPLOY_2_X -110.00 // Move outward to position deploy pin to the left of the arm
   #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y -125.00
   #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z Z_PROBE_ALLEN_KEY_DEPLOY_1_Z
-  #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE XY_TRAVEL_SPEED
+  #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE XY_PROBE_SPEED
 
   #define Z_PROBE_ALLEN_KEY_DEPLOY_3_X 45.00 // Move right to trigger deploy pin
   #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Y -125.00
   #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Z Z_PROBE_ALLEN_KEY_DEPLOY_2_Z
-  #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE (XY_TRAVEL_SPEED)/2
+  #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE (XY_PROBE_SPEED)/2
 
   #define Z_PROBE_ALLEN_KEY_STOW_1_X 36.00 // Line up with bed retaining clip
   #define Z_PROBE_ALLEN_KEY_STOW_1_Y -125.00
   #define Z_PROBE_ALLEN_KEY_STOW_1_Z 75.0
-  #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_TRAVEL_SPEED
+  #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED
 
   #define Z_PROBE_ALLEN_KEY_STOW_2_X Z_PROBE_ALLEN_KEY_STOW_1_X // move down to retract probe
   #define Z_PROBE_ALLEN_KEY_STOW_2_Y Z_PROBE_ALLEN_KEY_STOW_1_Y
   #define Z_PROBE_ALLEN_KEY_STOW_2_Z 0.0
-  #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_TRAVEL_SPEED)/2
+  #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED)/2
 
   #define Z_PROBE_ALLEN_KEY_STOW_3_X 0.0  // return to 0,0,100
   #define Z_PROBE_ALLEN_KEY_STOW_3_Y 0.0
   #define Z_PROBE_ALLEN_KEY_STOW_3_Z 100.0
-  #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_TRAVEL_SPEED
+  #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_SPEED
 
 #endif // Z_PROBE_ALLEN_KEY
 
@@ -741,7 +741,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
+  #define XY_PROBE_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
 
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 

Marlin/example_configurations/delta/kossel_xl/Configuration.h

@@ -507,27 +507,27 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 30.0
   //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y DELTA_PRINTABLE_RADIUS
   //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0
-  //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_TRAVEL_SPEED
+  //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED
 
   //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0
   //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y DELTA_PRINTABLE_RADIUS
   //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0
-  //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_TRAVEL_SPEED)/10
+  //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_SPEED)/10
 
   //#define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0 // Move the probe into position
   //#define Z_PROBE_ALLEN_KEY_STOW_1_Y 56.0
   //#define Z_PROBE_ALLEN_KEY_STOW_1_Z 23.0
-  //#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_TRAVEL_SPEED
+  //#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED
 
   //#define Z_PROBE_ALLEN_KEY_STOW_2_X -64.0 // Push it down
   //#define Z_PROBE_ALLEN_KEY_STOW_2_Y 56.0
   //#define Z_PROBE_ALLEN_KEY_STOW_2_Z 3.0
-  //#define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_TRAVEL_SPEED)/10
+  //#define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED)/10
 
   //#define Z_PROBE_ALLEN_KEY_STOW_3_X -64.0 // Move it up to clear
   //#define Z_PROBE_ALLEN_KEY_STOW_3_Y 56.0
   //#define Z_PROBE_ALLEN_KEY_STOW_3_Z 50.0
-  //#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_TRAVEL_SPEED
+  //#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_SPEED
 
 #endif // Z_PROBE_ALLEN_KEY
 
@@ -742,7 +742,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
+  #define XY_PROBE_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
 
   #define Z_RAISE_BETWEEN_PROBINGS 10 // How much the Z axis will be raised when traveling from between next probing points.
 

Marlin/example_configurations/makibox/Configuration.h

@@ -670,7 +670,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
+  #define XY_PROBE_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
 
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
 

Marlin/example_configurations/tvrrug/Round2/Configuration.h

@@ -657,7 +657,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
+  #define XY_PROBE_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
 
   #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.