From 25a11cd485aabc892bcdc36f83027e03cdb7b27c Mon Sep 17 00:00:00 2001 From: Frederik Kemner Date: Thu, 10 Aug 2017 14:53:04 -0700 Subject: [PATCH] Use bed size and inset instead of travel limits to define mesh area\n\nAs proposed in #7435 (#7480) --- Marlin/Configuration_adv.h | 16 ++++++++-------- .../AlephObjects/TAZ4/Configuration_adv.h | 16 ++++++++-------- .../Anet/A6/Configuration_adv.h | 16 ++++++++-------- .../Anet/A8/Configuration_adv.h | 16 ++++++++-------- .../BQ/Hephestos/Configuration_adv.h | 16 ++++++++-------- .../BQ/Hephestos_2/Configuration_adv.h | 16 ++++++++-------- .../BQ/WITBOX/Configuration_adv.h | 16 ++++++++-------- .../Cartesio/Configuration_adv.h | 16 ++++++++-------- .../Felix/Configuration_adv.h | 16 ++++++++-------- .../Folger Tech/i3-2020/Configuration_adv.h | 16 ++++++++-------- .../Infitary/i3-M508/Configuration_adv.h | 16 ++++++++-------- .../Malyan/M150/Configuration_adv.h | 16 ++++++++-------- .../RigidBot/Configuration_adv.h | 16 ++++++++-------- .../SCARA/Configuration_adv.h | 16 ++++++++-------- .../TinyBoy2/Configuration_adv.h | 16 ++++++++-------- .../Velleman/K8200/Configuration_adv.h | 16 ++++++++-------- .../Velleman/K8400/Configuration_adv.h | 16 ++++++++-------- .../FLSUN/auto_calibrate/Configuration_adv.h | 16 ++++++++-------- .../delta/FLSUN/kossel_mini/Configuration_adv.h | 16 ++++++++-------- .../delta/generic/Configuration_adv.h | 16 ++++++++-------- .../delta/kossel_mini/Configuration_adv.h | 16 ++++++++-------- .../delta/kossel_pro/Configuration_adv.h | 16 ++++++++-------- .../delta/kossel_xl/Configuration_adv.h | 16 ++++++++-------- .../gCreate/gMax1.5+/Configuration_adv.h | 16 ++++++++-------- .../makibox/Configuration_adv.h | 16 ++++++++-------- .../tvrrug/Round2/Configuration_adv.h | 16 ++++++++-------- .../wt150/Configuration_adv.h | 16 ++++++++-------- 27 files changed, 216 insertions(+), 216 deletions(-) diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 43be4998e9..fc7865401c 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -661,15 +661,15 @@ // Below are the macros that are used to define the borders for the mesh area, // made available here for specialized needs, ie dual extruder setup. #if ENABLED(MESH_BED_LEVELING) - #define MESH_MIN_X (X_MIN_POS + MESH_INSET) - #define MESH_MAX_X (X_MAX_POS - (MESH_INSET)) - #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET) - #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET)) + #define MESH_MIN_X MESH_INSET + #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET)) + #define MESH_MIN_Y MESH_INSET + #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET)) #elif ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) - #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_X UBL_MESH_INSET + #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_Y UBL_MESH_INSET + #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET)) // If this is defined, the currently active mesh will be saved in the // current slot on M500. diff --git a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h index 5511b1187e..723d3d12ef 100644 --- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h +++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h @@ -661,15 +661,15 @@ // Below are the macros that are used to define the borders for the mesh area, // made available here for specialized needs, ie dual extruder setup. #if ENABLED(MESH_BED_LEVELING) - #define MESH_MIN_X (X_MIN_POS + MESH_INSET) - #define MESH_MAX_X (X_MAX_POS - (MESH_INSET)) - #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET) - #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET)) + #define MESH_MIN_X MESH_INSET + #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET)) + #define MESH_MIN_Y MESH_INSET + #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET)) #elif ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) - #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_X UBL_MESH_INSET + #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_Y UBL_MESH_INSET + #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET)) // If this is defined, the currently active mesh will be saved in the // current slot on M500. diff --git a/Marlin/example_configurations/Anet/A6/Configuration_adv.h b/Marlin/example_configurations/Anet/A6/Configuration_adv.h index 265f54429e..24ee3e25cc 100644 --- a/Marlin/example_configurations/Anet/A6/Configuration_adv.h +++ b/Marlin/example_configurations/Anet/A6/Configuration_adv.h @@ -661,15 +661,15 @@ // Below are the macros that are used to define the borders for the mesh area, // made available here for specialized needs, ie dual extruder setup. #if ENABLED(MESH_BED_LEVELING) - #define MESH_MIN_X (X_MIN_POS + MESH_INSET) - #define MESH_MAX_X (X_MAX_POS - (MESH_INSET)) - #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET) - #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET)) + #define MESH_MIN_X MESH_INSET + #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET)) + #define MESH_MIN_Y MESH_INSET + #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET)) #elif ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) - #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_X UBL_MESH_INSET + #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_Y UBL_MESH_INSET + #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET)) // If this is defined, the currently active mesh will be saved in the // current slot on M500. diff --git a/Marlin/example_configurations/Anet/A8/Configuration_adv.h b/Marlin/example_configurations/Anet/A8/Configuration_adv.h index ee2229416c..0ff1fb0d1a 100644 --- a/Marlin/example_configurations/Anet/A8/Configuration_adv.h +++ b/Marlin/example_configurations/Anet/A8/Configuration_adv.h @@ -661,15 +661,15 @@ // Below are the macros that are used to define the borders for the mesh area, // made available here for specialized needs, ie dual extruder setup. #if ENABLED(MESH_BED_LEVELING) - #define MESH_MIN_X (X_MIN_POS + MESH_INSET) - #define MESH_MAX_X (X_MAX_POS - (MESH_INSET)) - #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET) - #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET)) + #define MESH_MIN_X MESH_INSET + #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET)) + #define MESH_MIN_Y MESH_INSET + #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET)) #elif ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) - #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_X UBL_MESH_INSET + #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_Y UBL_MESH_INSET + #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET)) // If this is defined, the currently active mesh will be saved in the // current slot on M500. diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h index 6113368510..e2a20f6da2 100644 --- a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h +++ b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h @@ -661,15 +661,15 @@ // Below are the macros that are used to define the borders for the mesh area, // made available here for specialized needs, ie dual extruder setup. #if ENABLED(MESH_BED_LEVELING) - #define MESH_MIN_X (X_MIN_POS + MESH_INSET) - #define MESH_MAX_X (X_MAX_POS - (MESH_INSET)) - #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET) - #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET)) + #define MESH_MIN_X MESH_INSET + #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET)) + #define MESH_MIN_Y MESH_INSET + #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET)) #elif ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) - #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_X UBL_MESH_INSET + #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_Y UBL_MESH_INSET + #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET)) // If this is defined, the currently active mesh will be saved in the // current slot on M500. diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h index adde1b8411..2e4365a97d 100644 --- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h +++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h @@ -661,15 +661,15 @@ // Below are the macros that are used to define the borders for the mesh area, // made available here for specialized needs, ie dual extruder setup. #if ENABLED(MESH_BED_LEVELING) - #define MESH_MIN_X (X_MIN_POS + MESH_INSET) - #define MESH_MAX_X (X_MAX_POS - (MESH_INSET)) - #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET) - #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET)) + #define MESH_MIN_X MESH_INSET + #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET)) + #define MESH_MIN_Y MESH_INSET + #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET)) #elif ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) - #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_X UBL_MESH_INSET + #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_Y UBL_MESH_INSET + #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET)) // If this is defined, the currently active mesh will be saved in the // current slot on M500. diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h index 6113368510..e2a20f6da2 100644 --- a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h +++ b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h @@ -661,15 +661,15 @@ // Below are the macros that are used to define the borders for the mesh area, // made available here for specialized needs, ie dual extruder setup. #if ENABLED(MESH_BED_LEVELING) - #define MESH_MIN_X (X_MIN_POS + MESH_INSET) - #define MESH_MAX_X (X_MAX_POS - (MESH_INSET)) - #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET) - #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET)) + #define MESH_MIN_X MESH_INSET + #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET)) + #define MESH_MIN_Y MESH_INSET + #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET)) #elif ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) - #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_X UBL_MESH_INSET + #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_Y UBL_MESH_INSET + #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET)) // If this is defined, the currently active mesh will be saved in the // current slot on M500. diff --git a/Marlin/example_configurations/Cartesio/Configuration_adv.h b/Marlin/example_configurations/Cartesio/Configuration_adv.h index f8d170dca4..b30fdf2ecc 100644 --- a/Marlin/example_configurations/Cartesio/Configuration_adv.h +++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h @@ -661,15 +661,15 @@ // Below are the macros that are used to define the borders for the mesh area, // made available here for specialized needs, ie dual extruder setup. #if ENABLED(MESH_BED_LEVELING) - #define MESH_MIN_X (X_MIN_POS + MESH_INSET) - #define MESH_MAX_X (X_MAX_POS - (MESH_INSET)) - #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET) - #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET)) + #define MESH_MIN_X MESH_INSET + #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET)) + #define MESH_MIN_Y MESH_INSET + #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET)) #elif ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) - #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_X UBL_MESH_INSET + #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_Y UBL_MESH_INSET + #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET)) // If this is defined, the currently active mesh will be saved in the // current slot on M500. diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h index b954f1ddb5..706bf132e8 100644 --- a/Marlin/example_configurations/Felix/Configuration_adv.h +++ b/Marlin/example_configurations/Felix/Configuration_adv.h @@ -661,15 +661,15 @@ // Below are the macros that are used to define the borders for the mesh area, // made available here for specialized needs, ie dual extruder setup. #if ENABLED(MESH_BED_LEVELING) - #define MESH_MIN_X (X_MIN_POS + MESH_INSET) - #define MESH_MAX_X (X_MAX_POS - (MESH_INSET)) - #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET) - #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET)) + #define MESH_MIN_X MESH_INSET + #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET)) + #define MESH_MIN_Y MESH_INSET + #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET)) #elif ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) - #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_X UBL_MESH_INSET + #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_Y UBL_MESH_INSET + #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET)) // If this is defined, the currently active mesh will be saved in the // current slot on M500. diff --git a/Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h b/Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h index 2bd6739010..c8ee383db9 100644 --- a/Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h +++ b/Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h @@ -661,15 +661,15 @@ // Below are the macros that are used to define the borders for the mesh area, // made available here for specialized needs, ie dual extruder setup. #if ENABLED(MESH_BED_LEVELING) - #define MESH_MIN_X (X_MIN_POS + MESH_INSET) - #define MESH_MAX_X (X_MAX_POS - (MESH_INSET)) - #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET) - #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET)) + #define MESH_MIN_X MESH_INSET + #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET)) + #define MESH_MIN_Y MESH_INSET + #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET)) #elif ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) - #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_X UBL_MESH_INSET + #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_Y UBL_MESH_INSET + #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET)) // If this is defined, the currently active mesh will be saved in the // current slot on M500. diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h index eb71272850..598f441389 100644 --- a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h +++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h @@ -661,15 +661,15 @@ // Below are the macros that are used to define the borders for the mesh area, // made available here for specialized needs, ie dual extruder setup. #if ENABLED(MESH_BED_LEVELING) - #define MESH_MIN_X (X_MIN_POS + MESH_INSET) - #define MESH_MAX_X (X_MAX_POS - (MESH_INSET)) - #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET) - #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET)) + #define MESH_MIN_X MESH_INSET + #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET)) + #define MESH_MIN_Y MESH_INSET + #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET)) #elif ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) - #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_X UBL_MESH_INSET + #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_Y UBL_MESH_INSET + #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET)) // If this is defined, the currently active mesh will be saved in the // current slot on M500. diff --git a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h index 11403a7fbc..4cd6f6766b 100644 --- a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h +++ b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h @@ -661,15 +661,15 @@ // Below are the macros that are used to define the borders for the mesh area, // made available here for specialized needs, ie dual extruder setup. #if ENABLED(MESH_BED_LEVELING) - #define MESH_MIN_X (X_MIN_POS + MESH_INSET) - #define MESH_MAX_X (X_MAX_POS - (MESH_INSET)) - #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET) - #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET)) + #define MESH_MIN_X MESH_INSET + #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET)) + #define MESH_MIN_Y MESH_INSET + #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET)) #elif ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) - #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_X UBL_MESH_INSET + #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_Y UBL_MESH_INSET + #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET)) // If this is defined, the currently active mesh will be saved in the // current slot on M500. diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h index 565ac51bfc..1bf0406965 100644 --- a/Marlin/example_configurations/RigidBot/Configuration_adv.h +++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h @@ -661,15 +661,15 @@ // Below are the macros that are used to define the borders for the mesh area, // made available here for specialized needs, ie dual extruder setup. #if ENABLED(MESH_BED_LEVELING) - #define MESH_MIN_X (X_MIN_POS + MESH_INSET) - #define MESH_MAX_X (X_MAX_POS - (MESH_INSET)) - #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET) - #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET)) + #define MESH_MIN_X MESH_INSET + #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET)) + #define MESH_MIN_Y MESH_INSET + #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET)) #elif ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) - #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_X UBL_MESH_INSET + #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_Y UBL_MESH_INSET + #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET)) // If this is defined, the currently active mesh will be saved in the // current slot on M500. diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h index 09771987b2..0c7b8b4e3f 100644 --- a/Marlin/example_configurations/SCARA/Configuration_adv.h +++ b/Marlin/example_configurations/SCARA/Configuration_adv.h @@ -661,15 +661,15 @@ // Below are the macros that are used to define the borders for the mesh area, // made available here for specialized needs, ie dual extruder setup. #if ENABLED(MESH_BED_LEVELING) - #define MESH_MIN_X (X_MIN_POS + MESH_INSET) - #define MESH_MAX_X (X_MAX_POS - (MESH_INSET)) - #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET) - #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET)) + #define MESH_MIN_X MESH_INSET + #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET)) + #define MESH_MIN_Y MESH_INSET + #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET)) #elif ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) - #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_X UBL_MESH_INSET + #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_Y UBL_MESH_INSET + #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET)) // If this is defined, the currently active mesh will be saved in the // current slot on M500. diff --git a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h index f590111ee9..543dcd8762 100644 --- a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h +++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h @@ -661,15 +661,15 @@ // Below are the macros that are used to define the borders for the mesh area, // made available here for specialized needs, ie dual extruder setup. #if ENABLED(MESH_BED_LEVELING) - #define MESH_MIN_X (X_MIN_POS + MESH_INSET) - #define MESH_MAX_X (X_MAX_POS - (MESH_INSET)) - #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET) - #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET)) + #define MESH_MIN_X MESH_INSET + #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET)) + #define MESH_MIN_Y MESH_INSET + #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET)) #elif ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) - #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_X UBL_MESH_INSET + #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_Y UBL_MESH_INSET + #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET)) // If this is defined, the currently active mesh will be saved in the // current slot on M500. diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h index 94f87feed2..0960203a60 100644 --- a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h +++ b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h @@ -674,15 +674,15 @@ // Below are the macros that are used to define the borders for the mesh area, // made available here for specialized needs, ie dual extruder setup. #if ENABLED(MESH_BED_LEVELING) - #define MESH_MIN_X (X_MIN_POS + MESH_INSET) - #define MESH_MAX_X (X_MAX_POS - (MESH_INSET)) - #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET) - #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET)) + #define MESH_MIN_X MESH_INSET + #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET)) + #define MESH_MIN_Y MESH_INSET + #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET)) #elif ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) - #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_X UBL_MESH_INSET + #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_Y UBL_MESH_INSET + #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET)) // If this is defined, the currently active mesh will be saved in the // current slot on M500. diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h index d910ab8ea2..7a28615d62 100644 --- a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h +++ b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h @@ -661,15 +661,15 @@ // Below are the macros that are used to define the borders for the mesh area, // made available here for specialized needs, ie dual extruder setup. #if ENABLED(MESH_BED_LEVELING) - #define MESH_MIN_X (X_MIN_POS + MESH_INSET) - #define MESH_MAX_X (X_MAX_POS - (MESH_INSET)) - #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET) - #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET)) + #define MESH_MIN_X MESH_INSET + #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET)) + #define MESH_MIN_Y MESH_INSET + #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET)) #elif ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) - #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_X UBL_MESH_INSET + #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_Y UBL_MESH_INSET + #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET)) // If this is defined, the currently active mesh will be saved in the // current slot on M500. diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h index 9f2bba659e..7b47e138b6 100644 --- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -663,15 +663,15 @@ // Below are the macros that are used to define the borders for the mesh area, // made available here for specialized needs, ie dual extruder setup. #if ENABLED(MESH_BED_LEVELING) - #define MESH_MIN_X (X_MIN_POS + MESH_INSET) - #define MESH_MAX_X (X_MAX_POS - (MESH_INSET)) - #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET) - #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET)) + #define MESH_MIN_X MESH_INSET + #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET)) + #define MESH_MIN_Y MESH_INSET + #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET)) #elif ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) - #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_X UBL_MESH_INSET + #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_Y UBL_MESH_INSET + #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET)) // If this is defined, the currently active mesh will be saved in the // current slot on M500. diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h index fdc2266331..b48a6f8e64 100644 --- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -663,15 +663,15 @@ // Below are the macros that are used to define the borders for the mesh area, // made available here for specialized needs, ie dual extruder setup. #if ENABLED(MESH_BED_LEVELING) - #define MESH_MIN_X (X_MIN_POS + MESH_INSET) - #define MESH_MAX_X (X_MAX_POS - (MESH_INSET)) - #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET) - #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET)) + #define MESH_MIN_X MESH_INSET + #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET)) + #define MESH_MIN_Y MESH_INSET + #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET)) #elif ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) - #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_X UBL_MESH_INSET + #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_Y UBL_MESH_INSET + #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET)) // If this is defined, the currently active mesh will be saved in the // current slot on M500. diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h index fdc2266331..b48a6f8e64 100644 --- a/Marlin/example_configurations/delta/generic/Configuration_adv.h +++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h @@ -663,15 +663,15 @@ // Below are the macros that are used to define the borders for the mesh area, // made available here for specialized needs, ie dual extruder setup. #if ENABLED(MESH_BED_LEVELING) - #define MESH_MIN_X (X_MIN_POS + MESH_INSET) - #define MESH_MAX_X (X_MAX_POS - (MESH_INSET)) - #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET) - #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET)) + #define MESH_MIN_X MESH_INSET + #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET)) + #define MESH_MIN_Y MESH_INSET + #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET)) #elif ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) - #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_X UBL_MESH_INSET + #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_Y UBL_MESH_INSET + #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET)) // If this is defined, the currently active mesh will be saved in the // current slot on M500. diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h index fdc2266331..b48a6f8e64 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h @@ -663,15 +663,15 @@ // Below are the macros that are used to define the borders for the mesh area, // made available here for specialized needs, ie dual extruder setup. #if ENABLED(MESH_BED_LEVELING) - #define MESH_MIN_X (X_MIN_POS + MESH_INSET) - #define MESH_MAX_X (X_MAX_POS - (MESH_INSET)) - #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET) - #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET)) + #define MESH_MIN_X MESH_INSET + #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET)) + #define MESH_MIN_Y MESH_INSET + #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET)) #elif ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) - #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_X UBL_MESH_INSET + #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_Y UBL_MESH_INSET + #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET)) // If this is defined, the currently active mesh will be saved in the // current slot on M500. diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h index c01524728c..5cdd4aae74 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h @@ -668,15 +668,15 @@ // Below are the macros that are used to define the borders for the mesh area, // made available here for specialized needs, ie dual extruder setup. #if ENABLED(MESH_BED_LEVELING) - #define MESH_MIN_X (X_MIN_POS + MESH_INSET) - #define MESH_MAX_X (X_MAX_POS - (MESH_INSET)) - #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET) - #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET)) + #define MESH_MIN_X MESH_INSET + #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET)) + #define MESH_MIN_Y MESH_INSET + #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET)) #elif ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) - #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_X UBL_MESH_INSET + #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_Y UBL_MESH_INSET + #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET)) // If this is defined, the currently active mesh will be saved in the // current slot on M500. diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h index a41212a881..4816afd25a 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h @@ -663,15 +663,15 @@ // Below are the macros that are used to define the borders for the mesh area, // made available here for specialized needs, ie dual extruder setup. #if ENABLED(MESH_BED_LEVELING) - #define MESH_MIN_X (X_MIN_POS + MESH_INSET) - #define MESH_MAX_X (X_MAX_POS - (MESH_INSET)) - #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET) - #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET)) + #define MESH_MIN_X MESH_INSET + #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET)) + #define MESH_MIN_Y MESH_INSET + #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET)) #elif ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) - #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_X UBL_MESH_INSET + #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_Y UBL_MESH_INSET + #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET)) // If this is defined, the currently active mesh will be saved in the // current slot on M500. diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h index f32a9354de..54b75428af 100644 --- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h +++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h @@ -661,15 +661,15 @@ // Below are the macros that are used to define the borders for the mesh area, // made available here for specialized needs, ie dual extruder setup. #if ENABLED(MESH_BED_LEVELING) - #define MESH_MIN_X (X_MIN_POS + MESH_INSET) - #define MESH_MAX_X (X_MAX_POS - (MESH_INSET)) - #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET) - #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET)) + #define MESH_MIN_X MESH_INSET + #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET)) + #define MESH_MIN_Y MESH_INSET + #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET)) #elif ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) - #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_X UBL_MESH_INSET + #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_Y UBL_MESH_INSET + #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET)) // If this is defined, the currently active mesh will be saved in the // current slot on M500. diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h index 8a568f2f8f..82fe996790 100644 --- a/Marlin/example_configurations/makibox/Configuration_adv.h +++ b/Marlin/example_configurations/makibox/Configuration_adv.h @@ -661,15 +661,15 @@ // Below are the macros that are used to define the borders for the mesh area, // made available here for specialized needs, ie dual extruder setup. #if ENABLED(MESH_BED_LEVELING) - #define MESH_MIN_X (X_MIN_POS + MESH_INSET) - #define MESH_MAX_X (X_MAX_POS - (MESH_INSET)) - #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET) - #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET)) + #define MESH_MIN_X MESH_INSET + #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET)) + #define MESH_MIN_Y MESH_INSET + #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET)) #elif ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) - #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_X UBL_MESH_INSET + #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_Y UBL_MESH_INSET + #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET)) // If this is defined, the currently active mesh will be saved in the // current slot on M500. diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h index 0f75b95c74..7a61aff1f1 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h @@ -661,15 +661,15 @@ // Below are the macros that are used to define the borders for the mesh area, // made available here for specialized needs, ie dual extruder setup. #if ENABLED(MESH_BED_LEVELING) - #define MESH_MIN_X (X_MIN_POS + MESH_INSET) - #define MESH_MAX_X (X_MAX_POS - (MESH_INSET)) - #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET) - #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET)) + #define MESH_MIN_X MESH_INSET + #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET)) + #define MESH_MIN_Y MESH_INSET + #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET)) #elif ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) - #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_X UBL_MESH_INSET + #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_Y UBL_MESH_INSET + #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET)) // If this is defined, the currently active mesh will be saved in the // current slot on M500. diff --git a/Marlin/example_configurations/wt150/Configuration_adv.h b/Marlin/example_configurations/wt150/Configuration_adv.h index 3501c7157e..bed6afd6bc 100644 --- a/Marlin/example_configurations/wt150/Configuration_adv.h +++ b/Marlin/example_configurations/wt150/Configuration_adv.h @@ -661,15 +661,15 @@ // Below are the macros that are used to define the borders for the mesh area, // made available here for specialized needs, ie dual extruder setup. #if ENABLED(MESH_BED_LEVELING) - #define MESH_MIN_X (X_MIN_POS + MESH_INSET) - #define MESH_MAX_X (X_MAX_POS - (MESH_INSET)) - #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET) - #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET)) + #define MESH_MIN_X MESH_INSET + #define MESH_MAX_X (X_BED_SIZE - (MESH_INSET)) + #define MESH_MIN_Y MESH_INSET + #define MESH_MAX_Y (Y_BED_SIZE - (MESH_INSET)) #elif ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_MESH_MIN_X (X_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_MAX_POS - (UBL_MESH_INSET)) - #define UBL_MESH_MIN_Y (Y_MIN_POS + UBL_MESH_INSET) - #define UBL_MESH_MAX_Y (Y_MAX_POS - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_X UBL_MESH_INSET + #define UBL_MESH_MAX_X (X_BED_SIZE - (UBL_MESH_INSET)) + #define UBL_MESH_MIN_Y UBL_MESH_INSET + #define UBL_MESH_MAX_Y (Y_BED_SIZE - (UBL_MESH_INSET)) // If this is defined, the currently active mesh will be saved in the // current slot on M500.