From 248b7dfa591a34a8aa1c6960944e1a3a468ad1de Mon Sep 17 00:00:00 2001 From: yangwenxiong <46896566+yangwenxiong@users.noreply.github.com> Date: Sat, 25 Jan 2020 16:13:39 +0800 Subject: [PATCH] BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans (#16595) --- Marlin/src/HAL/HAL_AVR/fastio.h | 19 +- Marlin/src/HAL/HAL_LPC1768/inc/SanityCheck.h | 4 + Marlin/src/HAL/HAL_SAMD51/HAL.cpp | 50 ++- Marlin/src/HAL/HAL_STM32F1/HAL.cpp | 18 + Marlin/src/core/drivers.h | 6 +- Marlin/src/core/language.h | 6 + Marlin/src/core/types.h | 6 +- Marlin/src/gcode/control/M42.cpp | 33 +- .../src/gcode/feature/trinamic/M911-M914.cpp | 26 +- Marlin/src/inc/Conditionals_adv.h | 2 + Marlin/src/inc/Conditionals_post.h | 108 ++++- Marlin/src/inc/SanityCheck.h | 104 ++++- Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp | 15 + Marlin/src/lcd/extensible_ui/ui_api.cpp | 4 +- Marlin/src/lcd/extensible_ui/ui_api.h | 2 +- Marlin/src/lcd/language/language_an.h | 2 +- Marlin/src/lcd/language/language_bg.h | 2 +- Marlin/src/lcd/language/language_ca.h | 2 +- Marlin/src/lcd/language/language_cz.h | 6 +- Marlin/src/lcd/language/language_da.h | 2 +- Marlin/src/lcd/language/language_el.h | 2 +- Marlin/src/lcd/language/language_el_gr.h | 2 +- Marlin/src/lcd/language/language_en.h | 6 +- Marlin/src/lcd/language/language_es.h | 4 +- Marlin/src/lcd/language/language_eu.h | 4 +- Marlin/src/lcd/language/language_fi.h | 2 +- Marlin/src/lcd/language/language_fr.h | 6 +- Marlin/src/lcd/language/language_it.h | 6 +- Marlin/src/lcd/language/language_ko_KR.h | 4 +- Marlin/src/lcd/language/language_nl.h | 2 +- Marlin/src/lcd/language/language_pl.h | 4 +- Marlin/src/lcd/language/language_pt.h | 2 +- Marlin/src/lcd/language/language_pt_br.h | 4 +- Marlin/src/lcd/language/language_sk.h | 4 +- Marlin/src/lcd/language/language_tr.h | 4 +- Marlin/src/lcd/language/language_uk.h | 2 +- Marlin/src/lcd/language/language_vi.h | 4 +- Marlin/src/lcd/language/language_zh_CN.h | 4 +- Marlin/src/lcd/language/language_zh_TW.h | 4 +- Marlin/src/lcd/menu/menu.h | 2 +- Marlin/src/lcd/menu/menu_advanced.cpp | 12 + Marlin/src/lcd/menu/menu_info.cpp | 18 + Marlin/src/lcd/menu/menu_temperature.cpp | 77 +++- Marlin/src/lcd/menu/menu_tmc.cpp | 18 + Marlin/src/lcd/menu/menu_tune.cpp | 75 +++- Marlin/src/libs/L64XX/L64XX_Marlin.cpp | 4 +- Marlin/src/libs/L64XX/L64XX_Marlin.h | 2 +- Marlin/src/libs/softspi.h | 7 +- Marlin/src/module/configuration_store.cpp | 44 ++ Marlin/src/module/endstops.cpp | 14 +- Marlin/src/module/planner.cpp | 16 +- Marlin/src/module/stepper.cpp | 104 ++++- Marlin/src/module/stepper/L64xx.h | 34 ++ Marlin/src/module/stepper/TMC26X.h | 16 + Marlin/src/module/stepper/indirection.h | 266 +++++++++++- Marlin/src/module/stepper/trinamic.cpp | 40 ++ Marlin/src/module/stepper/trinamic.h | 28 ++ Marlin/src/module/temperature.cpp | 182 +++++++- Marlin/src/module/temperature.h | 6 + Marlin/src/module/thermistor/thermistors.h | 41 +- Marlin/src/pins/pins.h | 70 ++++ Marlin/src/pins/pinsDebug_list.h | 153 +++++++ Marlin/src/pins/sensitive_pins.h | 104 ++++- Marlin/src/pins/stm32/pins_BTT_GTR_V1_0.h | 391 ++++++++++++++++++ .../BIGTREE_SKR_PRO_1v1/PeripheralPins.c | 49 ++- platformio.ini | 33 +- 66 files changed, 2081 insertions(+), 212 deletions(-) create mode 100644 Marlin/src/pins/stm32/pins_BTT_GTR_V1_0.h diff --git a/Marlin/src/HAL/HAL_AVR/fastio.h b/Marlin/src/HAL/HAL_AVR/fastio.h index 501a7cdf06..a36bf468a0 100644 --- a/Marlin/src/HAL/HAL_AVR/fastio.h +++ b/Marlin/src/HAL/HAL_AVR/fastio.h @@ -279,14 +279,25 @@ enum ClockSource2 : char { */ // Determine which harware PWMs are already in use +#define _PWM_CHK_FAN_B(P) (P == E0_AUTO_FAN_PIN || P == E1_AUTO_FAN_PIN || P == E2_AUTO_FAN_PIN || P == E3_AUTO_FAN_PIN || P == E4_AUTO_FAN_PIN || P == E5_AUTO_FAN_PIN || P == E6_AUTO_FAN_PIN || P == E7_AUTO_FAN_PIN || P == CHAMBER_AUTO_FAN_PIN) #if PIN_EXISTS(CONTROLLER_FAN) - #define PWM_CHK_FAN_B(P) (P == CONTROLLER_FAN_PIN || P == E0_AUTO_FAN_PIN || P == E1_AUTO_FAN_PIN || P == E2_AUTO_FAN_PIN || P == E3_AUTO_FAN_PIN || P == E4_AUTO_FAN_PIN || P == E5_AUTO_FAN_PIN || P == CHAMBER_AUTO_FAN_PIN) + #define PWM_CHK_FAN_B(P) (_PWM_CHK_FAN_B(P) || P == CONTROLLER_FAN_PIN) #else - #define PWM_CHK_FAN_B(P) (P == E0_AUTO_FAN_PIN || P == E1_AUTO_FAN_PIN || P == E2_AUTO_FAN_PIN || P == E3_AUTO_FAN_PIN || P == E4_AUTO_FAN_PIN || P == E5_AUTO_FAN_PIN || P == CHAMBER_AUTO_FAN_PIN) + #define PWM_CHK_FAN_B(P) _PWM_CHK_FAN_B(P) #endif -#if ANY_PIN(FAN, FAN1, FAN2) - #if PIN_EXISTS(FAN2) +#if ANY_PIN(FAN, FAN1, FAN2, FAN3, FAN4, FAN5, FAN6, FAN7) + #if PIN_EXISTS(FAN7) + #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN || P == FAN3_PIN || P == FAN4_PIN || P == FAN5_PIN || P == FAN6_PIN || P == FAN7_PIN) + #elif PIN_EXISTS(FAN6) + #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN || P == FAN3_PIN || P == FAN4_PIN || P == FAN5_PIN || P == FAN6_PIN) + #elif PIN_EXISTS(FAN5) + #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN || P == FAN3_PIN || P == FAN4_PIN || P == FAN5_PIN) + #elif PIN_EXISTS(FAN4) + #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN || P == FAN3_PIN || P == FAN4_PIN) + #elif PIN_EXISTS(FAN3) + #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN || P == FAN3_PIN) + #elif PIN_EXISTS(FAN2) #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN) #elif PIN_EXISTS(FAN1) #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN) diff --git a/Marlin/src/HAL/HAL_LPC1768/inc/SanityCheck.h b/Marlin/src/HAL/HAL_LPC1768/inc/SanityCheck.h index b32b05eac0..ffc70b3452 100644 --- a/Marlin/src/HAL/HAL_LPC1768/inc/SanityCheck.h +++ b/Marlin/src/HAL/HAL_LPC1768/inc/SanityCheck.h @@ -46,6 +46,10 @@ #error "TEMP_4_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)." #elif _OLD_TEMP_PIN(TEMP_5) #error "TEMP_5_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)." +#elif _OLD_TEMP_PIN(TEMP_6) + #error "TEMP_6_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)." +#elif _OLD_TEMP_PIN(TEMP_7) + #error "TEMP_7_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)." #endif #undef _OLD_TEMP_PIN diff --git a/Marlin/src/HAL/HAL_SAMD51/HAL.cpp b/Marlin/src/HAL/HAL_SAMD51/HAL.cpp index b5b62076e8..6074e4bbd6 100644 --- a/Marlin/src/HAL/HAL_SAMD51/HAL.cpp +++ b/Marlin/src/HAL/HAL_SAMD51/HAL.cpp @@ -59,6 +59,16 @@ #else #define GET_TEMP_5_ADC() -1 #endif +#if HAS_TEMP_ADC_6 + #define GET_TEMP_6_ADC() PIN_TO_ADC(TEMP_6_PIN) +#else + #define GET_TEMP_6_ADC() -1 +#endif +#if HAS_TEMP_ADC_7 + #define GET_TEMP_7_ADC() PIN_TO_ADC(TEMP_7_PIN) +#else + #define GET_TEMP_7_ADC() -1 +#endif #if HAS_TEMP_PROBE #define GET_PROBE_ADC() PIN_TO_ADC(TEMP_PROBE_PIN) #else @@ -85,13 +95,15 @@ #define GET_BUTTONS_ADC() -1 #endif -#define IS_ADC_REQUIRED(n) (GET_TEMP_0_ADC() == n || GET_TEMP_1_ADC() == n || GET_TEMP_2_ADC() == n \ - || GET_TEMP_3_ADC() == n || GET_TEMP_4_ADC() == n || GET_TEMP_5_ADC() == n \ - || GET_PROBE_ADC() == n \ - || GET_BED_ADC() == n \ - || GET_CHAMBER_ADC() == n \ - || GET_FILAMENT_WIDTH_ADC() == n \ - || GET_BUTTONS_ADC() == n) +#define IS_ADC_REQUIRED(n) ( \ + GET_TEMP_0_ADC() == n || GET_TEMP_1_ADC() == n || GET_TEMP_2_ADC() == n || GET_TEMP_3_ADC() == n \ + || GET_TEMP_4_ADC() == n || GET_TEMP_5_ADC() == n || GET_TEMP_6_ADC() == n || GET_TEMP_7_ADC() == n \ + || GET_PROBE_ADC() == n \ + || GET_BED_ADC() == n \ + || GET_CHAMBER_ADC() == n \ + || GET_FILAMENT_WIDTH_ADC() == n \ + || GET_BUTTONS_ADC() == n \ +) #define ADC0_IS_REQUIRED IS_ADC_REQUIRED(0) #define ADC1_IS_REQUIRED IS_ADC_REQUIRED(1) @@ -151,6 +163,12 @@ uint16_t HAL_adc_result; #if GET_TEMP_5_ADC() == 0 TEMP_5_PIN, #endif + #if GET_TEMP_6_ADC() == 0 + TEMP_6_PIN, + #endif + #if GET_TEMP_7_ADC() == 0 + TEMP_7_PIN, + #endif #if GET_PROBE_ADC() == 0 TEMP_PROBE_PIN, #endif @@ -185,6 +203,12 @@ uint16_t HAL_adc_result; #if GET_TEMP_5_ADC() == 1 TEMP_5_PIN, #endif + #if GET_TEMP_6_ADC() == 1 + TEMP_6_PIN, + #endif + #if GET_TEMP_7_ADC() == 1 + TEMP_7_PIN, + #endif #if GET_PROBE_ADC() == 1 TEMP_PROBE_PIN, #endif @@ -227,6 +251,12 @@ uint16_t HAL_adc_result; #if GET_TEMP_5_ADC() == 0 { PIN_TO_INPUTCTRL(TEMP_5_PIN) }, #endif + #if GET_TEMP_6_ADC() == 0 + { PIN_TO_INPUTCTRL(TEMP_6_PIN) }, + #endif + #if GET_TEMP_7_ADC() == 0 + { PIN_TO_INPUTCTRL(TEMP_7_PIN) }, + #endif #if GET_PROBE_ADC() == 0 { PIN_TO_INPUTCTRL(TEMP_PROBE_PIN) }, #endif @@ -270,6 +300,12 @@ uint16_t HAL_adc_result; #if GET_TEMP_5_ADC() == 1 { PIN_TO_INPUTCTRL(TEMP_5_PIN) }, #endif + #if GET_TEMP_6_ADC() == 1 + { PIN_TO_INPUTCTRL(TEMP_6_PIN) }, + #endif + #if GET_TEMP_7_ADC() == 1 + { PIN_TO_INPUTCTRL(TEMP_7_PIN) }, + #endif #if GET_PROBE_ADC() == 1 { PIN_TO_INPUTCTRL(TEMP_PROBE_PIN) }, #endif diff --git a/Marlin/src/HAL/HAL_STM32F1/HAL.cpp b/Marlin/src/HAL/HAL_STM32F1/HAL.cpp index 9dcb77ae4f..0db0371cae 100644 --- a/Marlin/src/HAL/HAL_STM32F1/HAL.cpp +++ b/Marlin/src/HAL/HAL_STM32F1/HAL.cpp @@ -118,6 +118,12 @@ const uint8_t adc_pins[] = { #if HAS_TEMP_ADC_5 TEMP_5_PIN, #endif + #if HAS_TEMP_ADC_6 + TEMP_6_PIN, + #endif + #if HAS_TEMP_ADC_7 + TEMP_7_PIN, + #endif #if ENABLED(FILAMENT_WIDTH_SENSOR) FILWIDTH_PIN, #endif @@ -160,6 +166,12 @@ enum TEMP_PINS : char { #if HAS_TEMP_ADC_5 TEMP_5, #endif + #if HAS_TEMP_ADC_6 + TEMP_6, + #endif + #if HAS_TEMP_ADC_7 + TEMP_7, + #endif #if ENABLED(FILAMENT_WIDTH_SENSOR) FILWIDTH, #endif @@ -346,6 +358,12 @@ void HAL_adc_start_conversion(const uint8_t adc_pin) { #if HAS_TEMP_ADC_5 case TEMP_5_PIN: pin_index = TEMP_5; break; #endif + #if HAS_TEMP_ADC_6 + case TEMP_6_PIN: pin_index = TEMP_6; break; + #endif + #if HAS_TEMP_ADC_7 + case TEMP_7_PIN: pin_index = TEMP_7; break; + #endif #if HAS_JOY_ADC_X case JOY_X_PIN: pin_index = JOY_X; break; #endif diff --git a/Marlin/src/core/drivers.h b/Marlin/src/core/drivers.h index 024cdedc9b..a89578f529 100644 --- a/Marlin/src/core/drivers.h +++ b/Marlin/src/core/drivers.h @@ -79,7 +79,8 @@ #define HAS_E_DRIVER(T) ( AXIS_DRIVER_TYPE_E0(T) || AXIS_DRIVER_TYPE_E1(T) \ || AXIS_DRIVER_TYPE_E2(T) || AXIS_DRIVER_TYPE_E3(T) \ - || AXIS_DRIVER_TYPE_E4(T) || AXIS_DRIVER_TYPE_E5(T) ) + || AXIS_DRIVER_TYPE_E4(T) || AXIS_DRIVER_TYPE_E5(T) \ + || AXIS_DRIVER_TYPE_E6(T) || AXIS_DRIVER_TYPE_E7(T) ) #define HAS_DRIVER(T) ( AXIS_DRIVER_TYPE_X(T) || AXIS_DRIVER_TYPE_X2(T) \ || AXIS_DRIVER_TYPE_Y(T) || AXIS_DRIVER_TYPE_Y2(T) \ @@ -152,7 +153,8 @@ || AXIS_HAS_##T(Z3) \ || AXIS_HAS_##T(E0) || AXIS_HAS_##T(E1) \ || AXIS_HAS_##T(E2) || AXIS_HAS_##T(E3) \ - || AXIS_HAS_##T(E4) || AXIS_HAS_##T(E5) ) + || AXIS_HAS_##T(E4) || AXIS_HAS_##T(E5) \ + || AXIS_HAS_##T(E6) || AXIS_HAS_##T(E7) ) #define HAS_STEALTHCHOP ANY_AXIS_HAS(STEALTHCHOP) #define HAS_STALLGUARD ANY_AXIS_HAS(STALLGUARD) diff --git a/Marlin/src/core/language.h b/Marlin/src/core/language.h index e7841ae451..fe279bae89 100644 --- a/Marlin/src/core/language.h +++ b/Marlin/src/core/language.h @@ -359,6 +359,8 @@ #define LCD_STR_N3 "3" #define LCD_STR_N4 "4" #define LCD_STR_N5 "5" + #define LCD_STR_N6 "6" + #define LCD_STR_N7 "7" #else #define LCD_FIRST_TOOL '1' #define LCD_STR_N0 "1" @@ -367,6 +369,8 @@ #define LCD_STR_N3 "4" #define LCD_STR_N4 "5" #define LCD_STR_N5 "6" + #define LCD_STR_N6 "7" + #define LCD_STR_N7 "8" #endif #define LCD_STR_E0 "E" LCD_STR_N0 @@ -375,6 +379,8 @@ #define LCD_STR_E3 "E" LCD_STR_N3 #define LCD_STR_E4 "E" LCD_STR_N4 #define LCD_STR_E5 "E" LCD_STR_N5 +#define LCD_STR_E6 "E" LCD_STR_N6 +#define LCD_STR_E7 "E" LCD_STR_N7 #include "multi_language.h" // Allow multiple languages diff --git a/Marlin/src/core/types.h b/Marlin/src/core/types.h index 72578faaaf..97ce5af5ee 100644 --- a/Marlin/src/core/types.h +++ b/Marlin/src/core/types.h @@ -43,11 +43,7 @@ enum AxisEnum : uint8_t { E_AXIS = 3, X_HEAD = 4, Y_HEAD = 5, Z_HEAD = 6, E0_AXIS = 3, - E1_AXIS = 4, - E2_AXIS = 5, - E3_AXIS = 6, - E4_AXIS = 7, - E5_AXIS = 8, + E1_AXIS, E2_AXIS, E3_AXIS, E4_AXIS, E5_AXIS, E6_AXIS, E7_AXIS, ALL_AXES = 0xFE, NO_AXIS = 0xFF }; diff --git a/Marlin/src/gcode/control/M42.cpp b/Marlin/src/gcode/control/M42.cpp index 1e6145f5b5..1ee03f8905 100644 --- a/Marlin/src/gcode/control/M42.cpp +++ b/Marlin/src/gcode/control/M42.cpp @@ -47,23 +47,38 @@ void GcodeSuite::M42() { const pin_t pin = GET_PIN_MAP_PIN(pin_index); - if (!parser.boolval('I') && pin_is_protected(pin)) return protected_pin_err(); - - pinMode(pin, OUTPUT); - extDigitalWrite(pin, pin_status); - analogWrite(pin, pin_status); - #if FAN_COUNT > 0 switch (pin) { #if HAS_FAN0 - case FAN0_PIN: thermalManager.fan_speed[0] = pin_status; break; + case FAN0_PIN: thermalManager.fan_speed[0] = pin_status; return; #endif #if HAS_FAN1 - case FAN1_PIN: thermalManager.fan_speed[1] = pin_status; break; + case FAN1_PIN: thermalManager.fan_speed[1] = pin_status; return; #endif #if HAS_FAN2 - case FAN2_PIN: thermalManager.fan_speed[2] = pin_status; break; + case FAN2_PIN: thermalManager.fan_speed[2] = pin_status; return; + #endif + #if HAS_FAN3 + case FAN3_PIN: thermalManager.fan_speed[3] = pin_status; return; + #endif + #if HAS_FAN4 + case FAN4_PIN: thermalManager.fan_speed[4] = pin_status; return; + #endif + #if HAS_FAN5 + case FAN5_PIN: thermalManager.fan_speed[5] = pin_status; return; + #endif + #if HAS_FAN6 + case FAN6_PIN: thermalManager.fan_speed[6] = pin_status; return; + #endif + #if HAS_FAN7 + case FAN7_PIN: thermalManager.fan_speed[7] = pin_status; return; #endif } #endif + + if (!parser.boolval('I') && pin_is_protected(pin)) return protected_pin_err(); + + pinMode(pin, OUTPUT); + extDigitalWrite(pin, pin_status); + analogWrite(pin, pin_status); } diff --git a/Marlin/src/gcode/feature/trinamic/M911-M914.cpp b/Marlin/src/gcode/feature/trinamic/M911-M914.cpp index f23bfbeaef..578deac844 100644 --- a/Marlin/src/gcode/feature/trinamic/M911-M914.cpp +++ b/Marlin/src/gcode/feature/trinamic/M911-M914.cpp @@ -38,7 +38,7 @@ #define M91x_SOME_X (M91x_USE(X) || M91x_USE(X2)) #define M91x_SOME_Y (M91x_USE(Y) || M91x_USE(Y2)) #define M91x_SOME_Z (M91x_USE(Z) || M91x_USE(Z2) || M91x_USE(Z3) || M91x_USE(Z4)) - #define M91x_SOME_E (M91x_USE_E(0) || M91x_USE_E(1) || M91x_USE_E(2) || M91x_USE_E(3) || M91x_USE_E(4) || M91x_USE_E(5)) + #define M91x_SOME_E (M91x_USE_E(0) || M91x_USE_E(1) || M91x_USE_E(2) || M91x_USE_E(3) || M91x_USE_E(4) || M91x_USE_E(5) || M91x_USE_E(6) || M91x_USE_E(7)) #if !M91x_SOME_X && !M91x_SOME_Y && !M91x_SOME_Z && !M91x_SOME_E #error "MONITOR_DRIVER_STATUS requires at least one TMC2130, 2160, 2208, 2209, 2660, 5130, or 5160." @@ -91,6 +91,12 @@ #if M91x_USE_E(5) tmc_report_otpw(stepperE5); #endif + #if M91x_USE_E(6) + tmc_report_otpw(stepperE6); + #endif + #if M91x_USE_E(7) + tmc_report_otpw(stepperE7); + #endif } /** @@ -188,6 +194,12 @@ #if M91x_USE_E(5) if (hasNone || eval == 5 || (hasE && eval < 0)) tmc_clear_otpw(stepperE5); #endif + #if M91x_USE_E(6) + if (hasNone || eval == 6 || (hasE && eval < 0)) tmc_clear_otpw(stepperE6); + #endif + #if M91x_USE_E(7) + if (hasNone || eval == 7 || (hasE && eval < 0)) tmc_clear_otpw(stepperE7); + #endif #endif } @@ -263,6 +275,12 @@ #if E_STEPPERS > 5 && AXIS_HAS_STEALTHCHOP(E5) case 5: TMC_SET_PWMTHRS_E(5); break; #endif + #if E_STEPPERS > 6 && AXIS_HAS_STEALTHCHOP(E6) + case 6: TMC_SET_PWMTHRS_E(6); break; + #endif + #if E_STEPPERS > 7 && AXIS_HAS_STEALTHCHOP(E7) + case 7: TMC_SET_PWMTHRS_E(7); break; + #endif } #endif // E_STEPPERS } break; @@ -312,6 +330,12 @@ #if E_STEPPERS > 5 && AXIS_HAS_STEALTHCHOP(E5) TMC_SAY_PWMTHRS_E(5); #endif + #if E_STEPPERS > 6 && AXIS_HAS_STEALTHCHOP(E6) + TMC_SAY_PWMTHRS_E(6); + #endif + #if E_STEPPERS > 7 && AXIS_HAS_STEALTHCHOP(E7) + TMC_SAY_PWMTHRS_E(7); + #endif } } #endif // HYBRID_THRESHOLD diff --git a/Marlin/src/inc/Conditionals_adv.h b/Marlin/src/inc/Conditionals_adv.h index 4e0fe84390..00be08433d 100644 --- a/Marlin/src/inc/Conditionals_adv.h +++ b/Marlin/src/inc/Conditionals_adv.h @@ -34,6 +34,8 @@ #undef TEMP_SENSOR_3 #undef TEMP_SENSOR_4 #undef TEMP_SENSOR_5 + #undef TEMP_SENSOR_6 + #undef TEMP_SENSOR_7 #undef FWRETRACT #undef PIDTEMP #undef AUTOTEMP diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h index 02e20cdd6e..1a2c39ec25 100644 --- a/Marlin/src/inc/Conditionals_post.h +++ b/Marlin/src/inc/Conditionals_post.h @@ -341,7 +341,7 @@ * Temp Sensor defines */ -#define ANY_TEMP_SENSOR_IS(n) (TEMP_SENSOR_0 == (n) || TEMP_SENSOR_1 == (n) || TEMP_SENSOR_2 == (n) || TEMP_SENSOR_3 == (n) || TEMP_SENSOR_4 == (n) || TEMP_SENSOR_5 == (n) || TEMP_SENSOR_BED == (n) || TEMP_SENSOR_PROBE == (n) || TEMP_SENSOR_CHAMBER == (n)) +#define ANY_TEMP_SENSOR_IS(n) (TEMP_SENSOR_0 == (n) || TEMP_SENSOR_1 == (n) || TEMP_SENSOR_2 == (n) || TEMP_SENSOR_3 == (n) || TEMP_SENSOR_4 == (n) || TEMP_SENSOR_5 == (n) || TEMP_SENSOR_6 == (n) || TEMP_SENSOR_7 == (n) || TEMP_SENSOR_BED == (n) || TEMP_SENSOR_PROBE == (n) || TEMP_SENSOR_CHAMBER == (n)) #define HAS_USER_THERMISTORS ANY_TEMP_SENSOR_IS(1000) @@ -483,6 +483,44 @@ #undef HEATER_5_MAXTEMP #endif +#if TEMP_SENSOR_6 == -4 + #define HEATER_6_USES_AD8495 +#elif TEMP_SENSOR_6 == -3 + #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_6." +#elif TEMP_SENSOR_6 == -2 + #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_6." +#elif TEMP_SENSOR_6 == -1 + #define HEATER_6_USES_AD595 +#elif TEMP_SENSOR_6 > 0 + #define THERMISTOR_HEATER_6 TEMP_SENSOR_6 + #define HEATER_6_USES_THERMISTOR + #if TEMP_SENSOR_6 == 1000 + #define HEATER_6_USER_THERMISTOR + #endif +#else + #undef HEATER_6_MINTEMP + #undef HEATER_6_MAXTEMP +#endif + +#if TEMP_SENSOR_7 == -4 + #define HEATER_7_USES_AD8495 +#elif TEMP_SENSOR_7 == -3 + #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_7." +#elif TEMP_SENSOR_7 == -2 + #error "MAX7775 Thermocouples (-2) not supported for TEMP_SENSOR_7." +#elif TEMP_SENSOR_7 == -1 + #define HEATER_7_USES_AD595 +#elif TEMP_SENSOR_7 > 0 + #define THERMISTOR_HEATER_7 TEMP_SENSOR_7 + #define HEATER_7_USES_THERMISTOR + #if TEMP_SENSOR_7 == 1000 + #define HEATER_7_USER_THERMISTOR + #endif +#else + #undef HEATER_7_MINTEMP + #undef HEATER_7_MAXTEMP +#endif + #if TEMP_SENSOR_BED == -4 #define HEATER_BED_USES_AD8495 #elif TEMP_SENSOR_BED == -3 @@ -538,8 +576,8 @@ #endif #define HOTEND_USES_THERMISTOR ANY( \ - HEATER_0_USES_THERMISTOR, HEATER_1_USES_THERMISTOR, HEATER_2_USES_THERMISTOR, \ - HEATER_3_USES_THERMISTOR, HEATER_4_USES_THERMISTOR, HEATER_5_USES_THERMISTOR) + HEATER_0_USES_THERMISTOR, HEATER_1_USES_THERMISTOR, HEATER_2_USES_THERMISTOR, HEATER_3_USES_THERMISTOR, \ + HEATER_4_USES_THERMISTOR, HEATER_5_USES_THERMISTOR, HEATER_6_USES_THERMISTOR, HEATER_7_USES_THERMISTOR ) /** * Default hotend offsets, if not defined @@ -1025,6 +1063,18 @@ #define HAS_E5_MICROSTEPS (PIN_EXISTS(E5_MS1)) #define HAS_SOLENOID_5 (PIN_EXISTS(SOL5)) +#define HAS_E6_ENABLE (PIN_EXISTS(E6_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E6))) +#define HAS_E6_DIR (PIN_EXISTS(E6_DIR)) +#define HAS_E6_STEP (PIN_EXISTS(E6_STEP)) +#define HAS_E6_MICROSTEPS (PIN_EXISTS(E6_MS1)) +#define HAS_SOLENOID_6 (PIN_EXISTS(SOL6)) + +#define HAS_E7_ENABLE (PIN_EXISTS(E7_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E7))) +#define HAS_E7_DIR (PIN_EXISTS(E7_DIR)) +#define HAS_E7_STEP (PIN_EXISTS(E7_STEP)) +#define HAS_E7_MICROSTEPS (PIN_EXISTS(E7_MS1)) +#define HAS_SOLENOID_7 (PIN_EXISTS(SOL7)) + // Trinamic Stepper Drivers #if HAS_TRINAMIC #define STEALTHCHOP_ENABLED ANY(STEALTHCHOP_XY, STEALTHCHOP_Z, STEALTHCHOP_E) @@ -1095,6 +1145,8 @@ #define HAS_TEMP_ADC_3 HAS_ADC_TEST(3) #define HAS_TEMP_ADC_4 HAS_ADC_TEST(4) #define HAS_TEMP_ADC_5 HAS_ADC_TEST(5) +#define HAS_TEMP_ADC_6 HAS_ADC_TEST(6) +#define HAS_TEMP_ADC_7 HAS_ADC_TEST(7) #define HAS_TEMP_ADC_BED HAS_ADC_TEST(BED) #define HAS_TEMP_ADC_PROBE HAS_ADC_TEST(PROBE) #define HAS_TEMP_ADC_CHAMBER HAS_ADC_TEST(CHAMBER) @@ -1118,6 +1170,8 @@ #define HAS_HEATER_3 (PIN_EXISTS(HEATER_3)) #define HAS_HEATER_4 (PIN_EXISTS(HEATER_4)) #define HAS_HEATER_5 (PIN_EXISTS(HEATER_5)) +#define HAS_HEATER_6 (PIN_EXISTS(HEATER_6)) +#define HAS_HEATER_7 (PIN_EXISTS(HEATER_7)) #define HAS_HEATER_BED (PIN_EXISTS(HEATER_BED)) // Shorthand for common combinations @@ -1146,12 +1200,14 @@ #define HAS_AUTO_FAN_3 (HOTENDS > 3 && PIN_EXISTS(E3_AUTO_FAN)) #define HAS_AUTO_FAN_4 (HOTENDS > 4 && PIN_EXISTS(E4_AUTO_FAN)) #define HAS_AUTO_FAN_5 (HOTENDS > 5 && PIN_EXISTS(E5_AUTO_FAN)) +#define HAS_AUTO_FAN_6 (HOTENDS > 6 && PIN_EXISTS(E6_AUTO_FAN)) +#define HAS_AUTO_FAN_7 (HOTENDS > 7 && PIN_EXISTS(E7_AUTO_FAN)) #define HAS_AUTO_CHAMBER_FAN (HAS_TEMP_CHAMBER && PIN_EXISTS(CHAMBER_AUTO_FAN)) -#define HAS_AUTO_FAN (HAS_AUTO_FAN_0 || HAS_AUTO_FAN_1 || HAS_AUTO_FAN_2 || HAS_AUTO_FAN_3 || HAS_AUTO_FAN_4 || HAS_AUTO_FAN_5 || HAS_AUTO_CHAMBER_FAN) +#define HAS_AUTO_FAN (HAS_AUTO_FAN_0 || HAS_AUTO_FAN_1 || HAS_AUTO_FAN_2 || HAS_AUTO_FAN_3 || HAS_AUTO_FAN_4 || HAS_AUTO_FAN_5 || HAS_AUTO_FAN_6 || HAS_AUTO_FAN_7 || HAS_AUTO_CHAMBER_FAN) #define _FANOVERLAP(A,B) (A##_AUTO_FAN_PIN == E##B##_AUTO_FAN_PIN) #if HAS_AUTO_FAN - #define AUTO_CHAMBER_IS_E (_FANOVERLAP(CHAMBER,0) || _FANOVERLAP(CHAMBER,1) || _FANOVERLAP(CHAMBER,2) || _FANOVERLAP(CHAMBER,3) || _FANOVERLAP(CHAMBER,4) || _FANOVERLAP(CHAMBER,5)) + #define AUTO_CHAMBER_IS_E (_FANOVERLAP(CHAMBER,0) || _FANOVERLAP(CHAMBER,1) || _FANOVERLAP(CHAMBER,2) || _FANOVERLAP(CHAMBER,3) || _FANOVERLAP(CHAMBER,4) || _FANOVERLAP(CHAMBER,5) || _FANOVERLAP(CHAMBER,6) || _FANOVERLAP(CHAMBER,7)) #endif #if !HAS_TEMP_SENSOR @@ -1164,8 +1220,14 @@ // Other fans #define HAS_FAN0 (PIN_EXISTS(FAN)) -#define HAS_FAN1 (PIN_EXISTS(FAN1) && CONTROLLER_FAN_PIN != FAN1_PIN && E0_AUTO_FAN_PIN != FAN1_PIN && E1_AUTO_FAN_PIN != FAN1_PIN && E2_AUTO_FAN_PIN != FAN1_PIN && E3_AUTO_FAN_PIN != FAN1_PIN && E4_AUTO_FAN_PIN != FAN1_PIN && E5_AUTO_FAN_PIN != FAN1_PIN) -#define HAS_FAN2 (PIN_EXISTS(FAN2) && CONTROLLER_FAN_PIN != FAN2_PIN && E0_AUTO_FAN_PIN != FAN2_PIN && E1_AUTO_FAN_PIN != FAN2_PIN && E2_AUTO_FAN_PIN != FAN2_PIN && E3_AUTO_FAN_PIN != FAN2_PIN && E4_AUTO_FAN_PIN != FAN2_PIN && E5_AUTO_FAN_PIN != FAN2_PIN) +#define _HAS_FAN(P) (PIN_EXISTS(FAN_##P) && CONTROLLER_FAN_PIN != FAN_##P##_PIN && E0_AUTO_FAN_PIN != FAN_##P##_PIN && E1_AUTO_FAN_PIN != FAN_##P##_PIN && E2_AUTO_FAN_PIN != FAN_##P##_PIN && E3_AUTO_FAN_PIN != FAN_##P##_PIN && E4_AUTO_FAN_PIN != FAN_##P##_PIN && E5_AUTO_FAN_PIN != FAN_##P##_PIN && E6_AUTO_FAN_PIN != FAN_##P##_PIN && E7_AUTO_FAN_PIN != FAN_##P##_PIN) +#define HAS_FAN1 _HAS_FAN(1) +#define HAS_FAN2 _HAS_FAN(2) +#define HAS_FAN3 _HAS_FAN(3) +#define HAS_FAN4 _HAS_FAN(4) +#define HAS_FAN5 _HAS_FAN(5) +#define HAS_FAN6 _HAS_FAN(6) +#define HAS_FAN7 _HAS_FAN(7) #define HAS_CONTROLLER_FAN (PIN_EXISTS(CONTROLLER_FAN)) // Servos @@ -1203,7 +1265,7 @@ #define HAS_MOTOR_CURRENT_PWM ANY_PIN(MOTOR_CURRENT_PWM_X, MOTOR_CURRENT_PWM_Y, MOTOR_CURRENT_PWM_XY, MOTOR_CURRENT_PWM_Z, MOTOR_CURRENT_PWM_E) #define HAS_SOME_Z_MICROSTEPS (HAS_Z_MICROSTEPS || HAS_Z2_MICROSTEPS || HAS_Z3_MICROSTEPS || HAS_Z4_MICROSTEPS) -#define HAS_SOME_E_MICROSTEPS (HAS_E0_MICROSTEPS || HAS_E1_MICROSTEPS || HAS_E2_MICROSTEPS || HAS_E3_MICROSTEPS || HAS_E4_MICROSTEPS || HAS_E5_MICROSTEPS) +#define HAS_SOME_E_MICROSTEPS (HAS_E0_MICROSTEPS || HAS_E1_MICROSTEPS || HAS_E2_MICROSTEPS || HAS_E3_MICROSTEPS || HAS_E4_MICROSTEPS || HAS_E5_MICROSTEPS || HAS_E6_MICROSTEPS || HAS_E7_MICROSTEPS) #define HAS_MICROSTEPS (HAS_X_MICROSTEPS || HAS_X2_MICROSTEPS || HAS_Y_MICROSTEPS || HAS_Y2_MICROSTEPS || HAS_SOME_Z_MICROSTEPS || HAS_SOME_E_MICROSTEPS) #if HAS_MICROSTEPS @@ -1278,26 +1340,27 @@ #if HAS_HEATER_0 && !defined(HEATER_0_INVERTING) #define HEATER_0_INVERTING false #endif - #if HAS_HEATER_1 && !defined(HEATER_1_INVERTING) #define HEATER_1_INVERTING false #endif - #if HAS_HEATER_2 && !defined(HEATER_2_INVERTING) #define HEATER_2_INVERTING false #endif - #if HAS_HEATER_3 && !defined(HEATER_3_INVERTING) #define HEATER_3_INVERTING false #endif - #if HAS_HEATER_4 && !defined(HEATER_4_INVERTING) #define HEATER_4_INVERTING false #endif - #if HAS_HEATER_5 && !defined(HEATER_5_INVERTING) #define HEATER_5_INVERTING false #endif +#if HAS_HEATER_6 && !defined(HEATER_6_INVERTING) + #define HEATER_6_INVERTING false +#endif +#if HAS_HEATER_7 && !defined(HEATER_7_INVERTING) + #define HEATER_7_INVERTING false +#endif /** * Helper Macros for heaters and extruder fan @@ -1314,6 +1377,12 @@ #define WRITE_HEATER_4(v) WRITE(HEATER_4_PIN, (v) ^ HEATER_4_INVERTING) #if HOTENDS > 5 #define WRITE_HEATER_5(v) WRITE(HEATER_5_PIN, (v) ^ HEATER_5_INVERTING) + #if HOTENDS > 6 + #define WRITE_HEATER_6(v) WRITE(HEATER_6_PIN, (v) ^ HEATER_6_INVERTING) + #if HOTENDS > 7 + #define WRITE_HEATER_7(v) WRITE(HEATER_7_PIN, (v) ^ HEATER_7_INVERTING) + #endif // HOTENDS > 7 + #endif // HOTENDS > 6 #endif // HOTENDS > 5 #endif // HOTENDS > 4 #endif // HOTENDS > 3 @@ -1365,7 +1434,17 @@ #define FAN_INVERTING false #endif -#if HAS_FAN2 +#if HAS_FAN7 + #define FAN_COUNT 8 +#elif HAS_FAN6 + #define FAN_COUNT 7 +#elif HAS_FAN5 + #define FAN_COUNT 6 +#elif HAS_FAN4 + #define FAN_COUNT 5 +#elif HAS_FAN3 + #define FAN_COUNT 4 +#elif HAS_FAN2 #define FAN_COUNT 3 #elif HAS_FAN1 #define FAN_COUNT 2 @@ -1640,7 +1719,6 @@ #define HAS_FIXED_3POINT #endif - /** * Buzzer/Speaker */ diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index 1cb946f99d..58c284746b 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -294,19 +294,19 @@ #elif defined(HAVE_L6470DRIVER) #error "HAVE_L6470DRIVER is now [AXIS]_DRIVER_TYPE L6470. Please update your Configuration.h." #elif defined(X_IS_TMC) || defined(X2_IS_TMC) || defined(Y_IS_TMC) || defined(Y2_IS_TMC) || defined(Z_IS_TMC) || defined(Z2_IS_TMC) || defined(Z3_IS_TMC) \ - || defined(E0_IS_TMC) || defined(E1_IS_TMC) || defined(E2_IS_TMC) || defined(E3_IS_TMC) || defined(E4_IS_TMC) || defined(E5_IS_TMC) + || defined(E0_IS_TMC) || defined(E1_IS_TMC) || defined(E2_IS_TMC) || defined(E3_IS_TMC) || defined(E4_IS_TMC) || defined(E5_IS_TMC) || defined(E6_IS_TMC) || defined(E7_IS_TMC) #error "[AXIS]_IS_TMC is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h." #elif defined(X_IS_TMC26X) || defined(X2_IS_TMC26X) || defined(Y_IS_TMC26X) || defined(Y2_IS_TMC26X) || defined(Z_IS_TMC26X) || defined(Z2_IS_TMC26X) || defined(Z3_IS_TMC26X) \ - || defined(E0_IS_TMC26X) || defined(E1_IS_TMC26X) || defined(E2_IS_TMC26X) || defined(E3_IS_TMC26X) || defined(E4_IS_TMC26X) || defined(E5_IS_TMC26X) + || defined(E0_IS_TMC26X) || defined(E1_IS_TMC26X) || defined(E2_IS_TMC26X) || defined(E3_IS_TMC26X) || defined(E4_IS_TMC26X) || defined(E5_IS_TMC26X) || defined(E6_IS_TMC26X) || defined(E7_IS_TMC26X) #error "[AXIS]_IS_TMC26X is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h." #elif defined(X_IS_TMC2130) || defined(X2_IS_TMC2130) || defined(Y_IS_TMC2130) || defined(Y2_IS_TMC2130) || defined(Z_IS_TMC2130) || defined(Z2_IS_TMC2130) || defined(Z3_IS_TMC2130) \ - || defined(E0_IS_TMC2130) || defined(E1_IS_TMC2130) || defined(E2_IS_TMC2130) || defined(E3_IS_TMC2130) || defined(E4_IS_TMC2130) || defined(E5_IS_TMC2130) + || defined(E0_IS_TMC2130) || defined(E1_IS_TMC2130) || defined(E2_IS_TMC2130) || defined(E3_IS_TMC2130) || defined(E4_IS_TMC2130) || defined(E5_IS_TMC2130) || defined(E6_IS_TMC2130) || defined(E7_IS_TMC2130) #error "[AXIS]_IS_TMC2130 is now [AXIS]_DRIVER_TYPE TMC2130. Please update your Configuration.h." #elif defined(X_IS_TMC2208) || defined(X2_IS_TMC2208) || defined(Y_IS_TMC2208) || defined(Y2_IS_TMC2208) || defined(Z_IS_TMC2208) || defined(Z2_IS_TMC2208) || defined(Z3_IS_TMC2208) \ - || defined(E0_IS_TMC2208) || defined(E1_IS_TMC2208) || defined(E2_IS_TMC2208) || defined(E3_IS_TMC2208) || defined(E4_IS_TMC2208) || defined(E5_IS_TMC2208) + || defined(E0_IS_TMC2208) || defined(E1_IS_TMC2208) || defined(E2_IS_TMC2208) || defined(E3_IS_TMC2208) || defined(E4_IS_TMC2208) || defined(E5_IS_TMC2208) || defined(E6_IS_TMC2208) || defined(E7_IS_TMC2208) #error "[AXIS]_IS_TMC2208 is now [AXIS]_DRIVER_TYPE TMC2208. Please update your Configuration.h." #elif defined(X_IS_L6470) || defined(X2_IS_L6470) || defined(Y_IS_L6470) || defined(Y2_IS_L6470) || defined(Z_IS_L6470) || defined(Z2_IS_L6470) || defined(Z3_IS_L6470) \ - || defined(E0_IS_L6470) || defined(E1_IS_L6470) || defined(E2_IS_L6470) || defined(E3_IS_L6470) || defined(E4_IS_L6470) || defined(E5_IS_L6470) + || defined(E0_IS_L6470) || defined(E1_IS_L6470) || defined(E2_IS_L6470) || defined(E3_IS_L6470) || defined(E4_IS_L6470) || defined(E5_IS_L6470) || defined(E6_IS_L6470) || defined(E7_IS_L6470) #error "[AXIS]_IS_L6470 is now [AXIS]_DRIVER_TYPE L6470. Please update your Configuration.h." #elif defined(AUTOMATIC_CURRENT_CONTROL) #error "AUTOMATIC_CURRENT_CONTROL is now MONITOR_DRIVER_STATUS. Please update your configuration." @@ -752,8 +752,8 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS */ #if EXTRUDERS > 1 - #if EXTRUDERS > 6 - #error "Marlin supports a maximum of 6 EXTRUDERS." + #if EXTRUDERS > 8 + #error "Marlin supports a maximum of 8 EXTRUDERS." #endif #if ENABLED(HEATERS_PARALLEL) @@ -1494,6 +1494,10 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS #error "TEMP_SENSOR_4 1000 requires HOTEND4_PULLUP_RESISTOR_OHMS, HOTEND4_RESISTANCE_25C_OHMS and HOTEND4_BETA in Configuration_adv.h." #elif ENABLED(HEATER_5_USER_THERMISTOR) && !(defined(HOTEND5_PULLUP_RESISTOR_OHMS) && defined(HOTEND5_RESISTANCE_25C_OHMS) && defined(HOTEND5_BETA)) #error "TEMP_SENSOR_5 1000 requires HOTEND5_PULLUP_RESISTOR_OHMS, HOTEND5_RESISTANCE_25C_OHMS and HOTEND5_BETA in Configuration_adv.h." +#elif ENABLED(HEATER_6_USER_THERMISTOR) && !(defined(HOTEND6_PULLUP_RESISTOR_OHMS) && defined(HOTEND6_RESISTANCE_25C_OHMS) && defined(HOTEND6_BETA)) + #error "TEMP_SENSOR_6 1000 requires HOTEND6_PULLUP_RESISTOR_OHMS, HOTEND6_RESISTANCE_25C_OHMS and HOTEND6_BETA in Configuration_adv.h." +#elif ENABLED(HEATER_7_USER_THERMISTOR) && !(defined(HOTEND7_PULLUP_RESISTOR_OHMS) && defined(HOTEND7_RESISTANCE_25C_OHMS) && defined(HOTEND7_BETA)) + #error "TEMP_SENSOR_7 1000 requires HOTEND7_PULLUP_RESISTOR_OHMS, HOTEND7_RESISTANCE_25C_OHMS and HOTEND7_BETA in Configuration_adv.h." #elif ENABLED(HEATER_BED_USER_THERMISTOR) && !(defined(BED_PULLUP_RESISTOR_OHMS) && defined(BED_RESISTANCE_25C_OHMS) && defined(BED_BETA)) #error "TEMP_SENSOR_BED 1000 requires BED_PULLUP_RESISTOR_OHMS, BED_RESISTANCE_25C_OHMS and BED_BETA in Configuration_adv.h." #elif ENABLED(HEATER_CHAMBER_USER_THERMISTOR) && !(defined(CHAMBER_PULLUP_RESISTOR_OHMS) && defined(CHAMBER_RESISTANCE_25C_OHMS) && defined(CHAMBER_BETA)) @@ -1564,13 +1568,45 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS #elif !PIN_EXISTS(TEMP_5) #error "TEMP_5_PIN not defined for this board." #endif + #if HOTENDS > 6 + #if TEMP_SENSOR_6 == 0 + #error "TEMP_SENSOR_6 is required with 6 HOTENDS." + #elif !HAS_HEATER_6 + #error "HEATER_6_PIN not defined for this board." + #elif !PIN_EXISTS(TEMP_6) + #error "TEMP_6_PIN not defined for this board." + #endif + #if HOTENDS > 7 + #if TEMP_SENSOR_7 == 0 + #error "TEMP_SENSOR_7 is required with 7 HOTENDS." + #elif !HAS_HEATER_7 + #error "HEATER_7_PIN not defined for this board." + #elif !PIN_EXISTS(TEMP_7) + #error "TEMP_7_PIN not defined for this board." + #endif + #elif TEMP_SENSOR_7 != 0 + #error "TEMP_SENSOR_7 shouldn't be set with only 7 HOTENDS." + #endif + #elif TEMP_SENSOR_6 != 0 + #error "TEMP_SENSOR_6 shouldn't be set with only 6 HOTENDS." + #elif TEMP_SENSOR_7 != 0 + #error "TEMP_SENSOR_7 shouldn't be set with only 6 HOTENDS." + #endif #elif TEMP_SENSOR_5 != 0 #error "TEMP_SENSOR_5 shouldn't be set with only 5 HOTENDS." + #elif TEMP_SENSOR_6 != 0 + #error "TEMP_SENSOR_6 shouldn't be set with only 5 HOTENDS." + #elif TEMP_SENSOR_7 != 0 + #error "TEMP_SENSOR_7 shouldn't be set with only 5 HOTENDS." #endif #elif TEMP_SENSOR_4 != 0 #error "TEMP_SENSOR_4 shouldn't be set with only 4 HOTENDS." #elif TEMP_SENSOR_5 != 0 #error "TEMP_SENSOR_5 shouldn't be set with only 4 HOTENDS." + #elif TEMP_SENSOR_6 != 0 + #error "TEMP_SENSOR_6 shouldn't be set with only 4 HOTENDS." + #elif TEMP_SENSOR_7 != 0 + #error "TEMP_SENSOR_7 shouldn't be set with only 4 HOTENDS." #endif #elif TEMP_SENSOR_3 != 0 #error "TEMP_SENSOR_3 shouldn't be set with only 3 HOTENDS." @@ -1578,6 +1614,10 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS #error "TEMP_SENSOR_4 shouldn't be set with only 3 HOTENDS." #elif TEMP_SENSOR_5 != 0 #error "TEMP_SENSOR_5 shouldn't be set with only 3 HOTENDS." + #elif TEMP_SENSOR_6 != 0 + #error "TEMP_SENSOR_6 shouldn't be set with only 3 HOTENDS." + #elif TEMP_SENSOR_7 != 0 + #error "TEMP_SENSOR_7 shouldn't be set with only 3 HOTENDS." #endif #elif TEMP_SENSOR_2 != 0 #error "TEMP_SENSOR_2 shouldn't be set with only 2 HOTENDS." @@ -1587,6 +1627,10 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS #error "TEMP_SENSOR_4 shouldn't be set with only 2 HOTENDS." #elif TEMP_SENSOR_5 != 0 #error "TEMP_SENSOR_5 shouldn't be set with only 2 HOTENDS." + #elif TEMP_SENSOR_6 != 0 + #error "TEMP_SENSOR_6 shouldn't be set with only 2 HOTENDS." + #elif TEMP_SENSOR_7 != 0 + #error "TEMP_SENSOR_7 shouldn't be set with only 2 HOTENDS." #endif #elif TEMP_SENSOR_1 != 0 && DISABLED(TEMP_SENSOR_1_AS_REDUNDANT) #error "TEMP_SENSOR_1 shouldn't be set with only 1 HOTEND." @@ -1598,6 +1642,10 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS #error "TEMP_SENSOR_4 shouldn't be set with only 1 HOTEND." #elif TEMP_SENSOR_5 != 0 #error "TEMP_SENSOR_5 shouldn't be set with only 1 HOTEND." +#elif TEMP_SENSOR_6 != 0 + #error "TEMP_SENSOR_6 shouldn't be set with only 1 HOTEND." +#elif TEMP_SENSOR_7 != 0 + #error "TEMP_SENSOR_7 shouldn't be set with only 1 HOTEND." #endif #if TEMP_SENSOR_PROBE @@ -1680,6 +1728,16 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS #if !(PIN_EXISTS(E5_STEP, E5_DIR) && HAS_E5_ENABLE) #error "E5_STEP_PIN, E5_DIR_PIN, or E5_ENABLE_PIN not defined for this board." #endif + #if E_STEPPERS > 6 + #if !(PIN_EXISTS(E6_STEP, E6_DIR) && HAS_E6_ENABLE) + #error "E6_STEP_PIN, E6_DIR_PIN, or E6_ENABLE_PIN not defined for this board." + #endif + #if E_STEPPERS > 7 + #if !(PIN_EXISTS(E7_STEP, E7_DIR) && HAS_E7_ENABLE) + #error "E7_STEP_PIN, E7_DIR_PIN, or E7_ENABLE_PIN not defined for this board." + #endif + #endif // E_STEPPERS > 7 + #endif // E_STEPPERS > 6 #endif // E_STEPPERS > 5 #endif // E_STEPPERS > 4 #endif // E_STEPPERS > 3 @@ -2008,6 +2066,10 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS #error "An SPI driven TMC driver on E4 requires E4_CS_PIN." #elif INVALID_TMC_SPI(E5) #error "An SPI driven TMC driver on E5 requires E5_CS_PIN." +#elif INVALID_TMC_SPI(E6) + #error "An SPI driven TMC driver on E6 requires E6_CS_PIN." +#elif INVALID_TMC_SPI(E7) + #error "An SPI driven TMC driver on E7 requires E7_CS_PIN." #endif #undef INVALID_TMC_SPI @@ -2041,6 +2103,10 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS #error "TMC2208 or TMC2209 on E4 requires E4_HARDWARE_SERIAL or E4_SERIAL_(RX|TX)_PIN." #elif INVALID_TMC_UART(E5) #error "TMC2208 or TMC2209 on E5 requires E5_HARDWARE_SERIAL or E5_SERIAL_(RX|TX)_PIN." +#elif INVALID_TMC_UART(E6) + #error "TMC2208 or TMC2209 on E6 requires E6_HARDWARE_SERIAL or E6_SERIAL_(RX|TX)_PIN." +#elif INVALID_TMC_UART(E7) + #error "TMC2208 or TMC2209 on E7 requires E7_HARDWARE_SERIAL or E7_SERIAL_(RX|TX)_PIN." #endif #undef INVALID_TMC_UART @@ -2192,7 +2258,8 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS || (IN_CHAIN(Z3) && !PIN_EXISTS(Z3_CS)) || (IN_CHAIN(E0) && !PIN_EXISTS(E0_CS)) \ || (IN_CHAIN(E1) && !PIN_EXISTS(E1_CS)) || (IN_CHAIN(E2) && !PIN_EXISTS(E2_CS)) \ || (IN_CHAIN(E3) && !PIN_EXISTS(E3_CS)) || (IN_CHAIN(E4) && !PIN_EXISTS(E4_CS)) \ - || (IN_CHAIN(E5) && !PIN_EXISTS(E5_CS)) + || (IN_CHAIN(E5) && !PIN_EXISTS(E5_CS)) || (IN_CHAIN(E6) && !PIN_EXISTS(E6_CS)) \ + || (IN_CHAIN(E7) && !PIN_EXISTS(E7_CS)) #error "All chained TMC drivers need a CS pin." #else #if IN_CHAIN(X) @@ -2221,6 +2288,10 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS #define CS_COMPARE E4_CS_PIN #elif IN_CHAIN(E5) #define CS_COMPARE E5_CS_PIN + #elif IN_CHAIN(E6) + #define CS_COMPARE E6_CS_PIN + #elif IN_CHAIN(E7) + #define CS_COMPARE E7_CS_PIN #endif #if (IN_CHAIN(X) && X_CS_PIN != CS_COMPARE) || (IN_CHAIN(Y) && Y_CS_PIN != CS_COMPARE) \ || (IN_CHAIN(Z) && Z_CS_PIN != CS_COMPARE) || (IN_CHAIN(X2) && X2_CS_PIN != CS_COMPARE) \ @@ -2228,7 +2299,8 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS || (IN_CHAIN(Z3) && Z3_CS_PIN != CS_COMPARE) || (IN_CHAIN(E0) && E0_CS_PIN != CS_COMPARE) \ || (IN_CHAIN(E1) && E1_CS_PIN != CS_COMPARE) || (IN_CHAIN(E2) && E2_CS_PIN != CS_COMPARE) \ || (IN_CHAIN(E3) && E3_CS_PIN != CS_COMPARE) || (IN_CHAIN(E4) && E4_CS_PIN != CS_COMPARE) \ - || (IN_CHAIN(E5) && E5_CS_PIN != CS_COMPARE) + || (IN_CHAIN(E5) && E5_CS_PIN != CS_COMPARE) || (IN_CHAIN(E6) && E6_CS_PIN != CS_COMPARE) \ + || (IN_CHAIN(E7) && E7_CS_PIN != CS_COMPARE) #error "All chained TMC drivers must use the same CS pin." #endif #endif @@ -2521,12 +2593,26 @@ static_assert( _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2) #error "SPINDLE_LASER_PWM_PIN conflicts with E4_AUTO_FAN_PIN." #elif _PIN_CONFLICT(E5_AUTO_FAN) #error "SPINDLE_LASER_PWM_PIN conflicts with E5_AUTO_FAN_PIN." + #elif _PIN_CONFLICT(E6_AUTO_FAN) + #error "SPINDLE_LASER_PWM_PIN conflicts with E6_AUTO_FAN_PIN." + #elif _PIN_CONFLICT(E7_AUTO_FAN) + #error "SPINDLE_LASER_PWM_PIN conflicts with E7_AUTO_FAN_PIN." #elif _PIN_CONFLICT(FAN) #error "SPINDLE_LASER_PWM_PIN conflicts with FAN_PIN." #elif _PIN_CONFLICT(FAN1) #error "SPINDLE_LASER_PWM_PIN conflicts with FAN1_PIN." #elif _PIN_CONFLICT(FAN2) #error "SPINDLE_LASER_PWM_PIN conflicts with FAN2_PIN." + #elif _PIN_CONFLICT(FAN3) + #error "SPINDLE_LASER_PWM_PIN conflicts with FAN3_PIN." + #elif _PIN_CONFLICT(FAN4) + #error "SPINDLE_LASER_PWM_PIN conflicts with FAN4_PIN." + #elif _PIN_CONFLICT(FAN5) + #error "SPINDLE_LASER_PWM_PIN conflicts with FAN5_PIN." + #elif _PIN_CONFLICT(FAN6) + #error "SPINDLE_LASER_PWM_PIN conflicts with FAN6_PIN." + #elif _PIN_CONFLICT(FAN7) + #error "SPINDLE_LASER_PWM_PIN conflicts with FAN7_PIN." #elif _PIN_CONFLICT(CONTROLLERFAN) #error "SPINDLE_LASER_PWM_PIN conflicts with CONTROLLERFAN_PIN." #elif _PIN_CONFLICT(MOTOR_CURRENT_PWM_XY) diff --git a/Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp b/Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp index d6ce8bfdd6..bf57f1dfc2 100644 --- a/Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp +++ b/Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp @@ -1092,6 +1092,21 @@ void MarlinUI::draw_status_screen() { #if HAS_FAN2 || thermalManager.fan_speed[2] #endif + #if HAS_FAN3 + || thermalManager.fan_speed[3] + #endif + #if HAS_FAN4 + || thermalManager.fan_speed[4] + #endif + #if HAS_FAN5 + || thermalManager.fan_speed[5] + #endif + #if HAS_FAN6 + || thermalManager.fan_speed[6] + #endif + #if HAS_FAN7 + || thermalManager.fan_speed[7] + #endif ) leds |= LED_C; #endif // FAN_COUNT > 0 diff --git a/Marlin/src/lcd/extensible_ui/ui_api.cpp b/Marlin/src/lcd/extensible_ui/ui_api.cpp index 253017493f..8c8133f22b 100644 --- a/Marlin/src/lcd/extensible_ui/ui_api.cpp +++ b/Marlin/src/lcd/extensible_ui/ui_api.cpp @@ -912,7 +912,7 @@ namespace ExtUI { #endif { #if HOTENDS - static constexpr int16_t heater_maxtemp[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP, HEATER_5_MAXTEMP); + static constexpr int16_t heater_maxtemp[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP, HEATER_5_MAXTEMP, HEATER_6_MAXTEMP, HEATER_7_MAXTEMP); const int16_t e = heater - H0; thermalManager.setTargetHotend(LROUND(constrain(value, 0, heater_maxtemp[e] - 15)), e); #endif @@ -924,7 +924,7 @@ namespace ExtUI { value *= TOUCH_UI_LCD_TEMP_SCALING; #endif #if HOTENDS - constexpr int16_t heater_maxtemp[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP, HEATER_5_MAXTEMP); + constexpr int16_t heater_maxtemp[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP, HEATER_5_MAXTEMP, HEATER_6_MAXTEMP, HEATER_7_MAXTEMP); const int16_t e = extruder - E0; enableHeater(extruder); thermalManager.setTargetHotend(LROUND(constrain(value, 0, heater_maxtemp[e] - 15)), e); diff --git a/Marlin/src/lcd/extensible_ui/ui_api.h b/Marlin/src/lcd/extensible_ui/ui_api.h index 2180587a1e..536da132c0 100644 --- a/Marlin/src/lcd/extensible_ui/ui_api.h +++ b/Marlin/src/lcd/extensible_ui/ui_api.h @@ -55,7 +55,7 @@ namespace ExtUI { enum axis_t : uint8_t { X, Y, Z }; enum extruder_t : uint8_t { E0, E1, E2, E3, E4, E5 }; enum heater_t : uint8_t { H0, H1, H2, H3, H4, H5, BED, CHAMBER }; - enum fan_t : uint8_t { FAN0, FAN1, FAN2, FAN3, FAN4, FAN5 }; + enum fan_t : uint8_t { FAN0, FAN1, FAN2, FAN3, FAN4, FAN5, FAN6, FAN7 }; enum result_t : uint8_t { PID_BAD_EXTRUDER_NUM, PID_TEMP_TOO_HIGH, PID_TUNING_TIMEOUT, PID_DONE }; constexpr uint8_t extruderCount = EXTRUDERS; diff --git a/Marlin/src/lcd/language/language_an.h b/Marlin/src/lcd/language/language_an.h index 4957dc102e..c4fbbe1be6 100644 --- a/Marlin/src/lcd/language/language_an.h +++ b/Marlin/src/lcd/language/language_an.h @@ -93,7 +93,7 @@ namespace Language_an { PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("Boquilla ~"); PROGMEM Language_Str MSG_BED = _UxGT("Base"); PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Ixoriador"); - PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Ixoriador ="); + PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Ixoriador ~"); PROGMEM Language_Str MSG_FLOW = _UxGT("Fluxo"); PROGMEM Language_Str MSG_FLOW_N = _UxGT("Fluxo ~"); PROGMEM Language_Str MSG_CONTROL = _UxGT("Control"); diff --git a/Marlin/src/lcd/language/language_bg.h b/Marlin/src/lcd/language/language_bg.h index 93027da7fe..19e0b90e52 100644 --- a/Marlin/src/lcd/language/language_bg.h +++ b/Marlin/src/lcd/language/language_bg.h @@ -83,7 +83,7 @@ namespace Language_bg { PROGMEM Language_Str MSG_NOZZLE_N = " " LCD_STR_THERMOMETER _UxGT(" Дюза ~"); PROGMEM Language_Str MSG_BED = " " LCD_STR_THERMOMETER _UxGT(" Легло"); PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Вентилатор"); - PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Вентилатор ="); + PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Вентилатор ~"); PROGMEM Language_Str MSG_FLOW = _UxGT("Поток"); PROGMEM Language_Str MSG_FLOW_N = _UxGT("Поток ~"); PROGMEM Language_Str MSG_CONTROL = _UxGT("Управление"); diff --git a/Marlin/src/lcd/language/language_ca.h b/Marlin/src/lcd/language/language_ca.h index a1e134622f..d1cc0cf7bc 100644 --- a/Marlin/src/lcd/language/language_ca.h +++ b/Marlin/src/lcd/language/language_ca.h @@ -94,7 +94,7 @@ namespace Language_ca { PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("Nozzle ~"); PROGMEM Language_Str MSG_BED = _UxGT("Llit"); PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Vel. Ventilador"); - PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Vel. Ventilador ="); + PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Vel. Ventilador ~"); PROGMEM Language_Str MSG_FLOW = _UxGT("Flux"); PROGMEM Language_Str MSG_FLOW_N = _UxGT("Flux ~"); PROGMEM Language_Str MSG_VTRAV_MIN = _UxGT("VViatge min"); diff --git a/Marlin/src/lcd/language/language_cz.h b/Marlin/src/lcd/language/language_cz.h index 1be6289657..6703d300de 100644 --- a/Marlin/src/lcd/language/language_cz.h +++ b/Marlin/src/lcd/language/language_cz.h @@ -251,10 +251,10 @@ namespace Language_cz { PROGMEM Language_Str MSG_BED = _UxGT("Podložka"); PROGMEM Language_Str MSG_CHAMBER = _UxGT("Komora"); PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Rychlost vent."); - PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Rychlost vent. ="); - PROGMEM Language_Str MSG_STORED_FAN_N = _UxGT("Ulož. vent. ="); + PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Rychlost vent. ~"); + PROGMEM Language_Str MSG_STORED_FAN_N = _UxGT("Ulož. vent. ~"); PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("Rychlost ex. vent."); - PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Rychlost ex. vent. ="); + PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Rychlost ex. vent. ~"); PROGMEM Language_Str MSG_FLOW = _UxGT("Průtok"); PROGMEM Language_Str MSG_FLOW_N = _UxGT("Průtok ~"); PROGMEM Language_Str MSG_CONTROL = _UxGT("Ovládaní"); diff --git a/Marlin/src/lcd/language/language_da.h b/Marlin/src/lcd/language/language_da.h index 8e25498f48..67baf9d217 100644 --- a/Marlin/src/lcd/language/language_da.h +++ b/Marlin/src/lcd/language/language_da.h @@ -84,7 +84,7 @@ namespace Language_da { PROGMEM Language_Str MSG_BED = _UxGT("Plade"); PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Blæser hastighed"); - PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Blæser hastighed ="); + PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Blæser hastighed ~"); PROGMEM Language_Str MSG_CONTROL = _UxGT("Kontrol"); PROGMEM Language_Str MSG_MIN = _UxGT(" \002 Min"); PROGMEM Language_Str MSG_MAX = _UxGT(" \002 Max"); diff --git a/Marlin/src/lcd/language/language_el.h b/Marlin/src/lcd/language/language_el.h index 1ec9599dbd..6ebae11576 100644 --- a/Marlin/src/lcd/language/language_el.h +++ b/Marlin/src/lcd/language/language_el.h @@ -91,7 +91,7 @@ namespace Language_el { PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("Ακροφύσιο ~"); PROGMEM Language_Str MSG_BED = _UxGT("Κλίνη"); PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Ταχύτητα ανεμιστήρα"); - PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Ταχύτητα ανεμιστήρα ="); + PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Ταχύτητα ανεμιστήρα ~"); PROGMEM Language_Str MSG_FLOW = _UxGT("Ροή"); PROGMEM Language_Str MSG_FLOW_N = _UxGT("Ροή ~"); PROGMEM Language_Str MSG_CONTROL = _UxGT("Έλεγχος"); diff --git a/Marlin/src/lcd/language/language_el_gr.h b/Marlin/src/lcd/language/language_el_gr.h index c5be7087a9..3e6e07f0bb 100644 --- a/Marlin/src/lcd/language/language_el_gr.h +++ b/Marlin/src/lcd/language/language_el_gr.h @@ -92,7 +92,7 @@ namespace Language_el_gr { PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("Ακροφύσιο ~"); PROGMEM Language_Str MSG_BED = _UxGT("Κλίνη"); PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Ταχύτητα ανεμιστήρα"); - PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Ταχύτητα ανεμιστήρα ="); + PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Ταχύτητα ανεμιστήρα ~"); PROGMEM Language_Str MSG_FLOW = _UxGT("Ροή"); PROGMEM Language_Str MSG_FLOW_N = _UxGT("Ροή ~"); PROGMEM Language_Str MSG_CONTROL = _UxGT("Έλεγχος"); diff --git a/Marlin/src/lcd/language/language_en.h b/Marlin/src/lcd/language/language_en.h index 188098e597..363aff4820 100644 --- a/Marlin/src/lcd/language/language_en.h +++ b/Marlin/src/lcd/language/language_en.h @@ -242,10 +242,10 @@ namespace Language_en { PROGMEM Language_Str MSG_BED = _UxGT("Bed"); PROGMEM Language_Str MSG_CHAMBER = _UxGT("Enclosure"); PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Fan Speed"); - PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Fan Speed ="); - PROGMEM Language_Str MSG_STORED_FAN_N = _UxGT("Stored Fan ="); + PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Fan Speed ~"); + PROGMEM Language_Str MSG_STORED_FAN_N = _UxGT("Stored Fan ~"); PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("Extra Fan Speed"); - PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Extra Fan Speed ="); + PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Extra Fan Speed ~"); PROGMEM Language_Str MSG_FLOW = _UxGT("Flow"); PROGMEM Language_Str MSG_FLOW_N = _UxGT("Flow ~"); PROGMEM Language_Str MSG_CONTROL = _UxGT("Control"); diff --git a/Marlin/src/lcd/language/language_es.h b/Marlin/src/lcd/language/language_es.h index ff9a8d2be7..83ec5e4331 100644 --- a/Marlin/src/lcd/language/language_es.h +++ b/Marlin/src/lcd/language/language_es.h @@ -240,9 +240,9 @@ namespace Language_es { PROGMEM Language_Str MSG_BED = _UxGT("Cama"); PROGMEM Language_Str MSG_CHAMBER = _UxGT("Recinto"); PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Ventilador"); - PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Ventilador ="); + PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Ventilador ~"); PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("Vel. Ext. ventilador"); - PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Vel. Ext. ventilador ="); + PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Vel. Ext. ventilador ~"); PROGMEM Language_Str MSG_FLOW = _UxGT("Flujo"); PROGMEM Language_Str MSG_FLOW_N = _UxGT("Flujo ~"); PROGMEM Language_Str MSG_CONTROL = _UxGT("Control"); diff --git a/Marlin/src/lcd/language/language_eu.h b/Marlin/src/lcd/language/language_eu.h index fe88823f45..1ef40626d6 100644 --- a/Marlin/src/lcd/language/language_eu.h +++ b/Marlin/src/lcd/language/language_eu.h @@ -147,9 +147,9 @@ namespace Language_eu { PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("Pita ~"); PROGMEM Language_Str MSG_BED = _UxGT("Ohea"); PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Haizagailu abiadura"); - PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Haizagailu abiadura ="); + PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Haizagailu abiadura ~"); PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("Haiz.gehig. abiadura"); - PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Haiz.gehig. abiadura ="); + PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Haiz.gehig. abiadura ~"); PROGMEM Language_Str MSG_FLOW = _UxGT("Fluxua"); PROGMEM Language_Str MSG_FLOW_N = _UxGT("Fluxua ~"); PROGMEM Language_Str MSG_CONTROL = _UxGT("Kontrola"); diff --git a/Marlin/src/lcd/language/language_fi.h b/Marlin/src/lcd/language/language_fi.h index 93b9f0dff2..a9a65709a8 100644 --- a/Marlin/src/lcd/language/language_fi.h +++ b/Marlin/src/lcd/language/language_fi.h @@ -79,7 +79,7 @@ namespace Language_fi { PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("Suutin ~"); PROGMEM Language_Str MSG_BED = _UxGT("Alusta"); PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Tuul. nopeus"); - PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Tuul. nopeus ="); + PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Tuul. nopeus ~"); PROGMEM Language_Str MSG_FLOW = _UxGT("Virtaus"); PROGMEM Language_Str MSG_FLOW_N = _UxGT("Virtaus ~"); PROGMEM Language_Str MSG_CONTROL = _UxGT("Kontrolli"); diff --git a/Marlin/src/lcd/language/language_fr.h b/Marlin/src/lcd/language/language_fr.h index 2506fd89dc..2d47744e49 100644 --- a/Marlin/src/lcd/language/language_fr.h +++ b/Marlin/src/lcd/language/language_fr.h @@ -235,10 +235,10 @@ namespace Language_fr { PROGMEM Language_Str MSG_BED = _UxGT("Lit"); PROGMEM Language_Str MSG_CHAMBER = _UxGT("Caisson"); PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Vit. ventil. "); // 15 car. max - PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Vit. ventil. ="); - PROGMEM Language_Str MSG_STORED_FAN_N = _UxGT("Vit. enreg. ="); + PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Vit. ventil. ~"); + PROGMEM Language_Str MSG_STORED_FAN_N = _UxGT("Vit. enreg. ~"); PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("Extra ventil. "); - PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Extra ventil. ="); + PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Extra ventil. ~"); PROGMEM Language_Str MSG_FLOW = _UxGT("Flux"); PROGMEM Language_Str MSG_FLOW_N = _UxGT("Flux ~"); diff --git a/Marlin/src/lcd/language/language_it.h b/Marlin/src/lcd/language/language_it.h index 7af854ea75..ea17a076b6 100644 --- a/Marlin/src/lcd/language/language_it.h +++ b/Marlin/src/lcd/language/language_it.h @@ -240,10 +240,10 @@ namespace Language_it { PROGMEM Language_Str MSG_BED = _UxGT("Piatto"); PROGMEM Language_Str MSG_CHAMBER = _UxGT("Camera"); PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Vel. ventola"); // Max 15 characters - PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Vel. ventola ="); // Max 15 characters - PROGMEM Language_Str MSG_STORED_FAN_N = _UxGT("Ventola mem. ="); // Max 15 characters + PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Vel. ventola ~"); // Max 15 characters + PROGMEM Language_Str MSG_STORED_FAN_N = _UxGT("Ventola mem. ~"); // Max 15 characters PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("Extra vel.vent."); // Max 15 characters - PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Extra v.vent. ="); // Max 15 characters + PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Extra v.vent. ~"); // Max 15 characters PROGMEM Language_Str MSG_FLOW = _UxGT("Flusso"); PROGMEM Language_Str MSG_FLOW_N = _UxGT("Flusso ~"); PROGMEM Language_Str MSG_CONTROL = _UxGT("Controllo"); diff --git a/Marlin/src/lcd/language/language_ko_KR.h b/Marlin/src/lcd/language/language_ko_KR.h index d736d415f9..7d33ccc508 100644 --- a/Marlin/src/lcd/language/language_ko_KR.h +++ b/Marlin/src/lcd/language/language_ko_KR.h @@ -77,9 +77,9 @@ namespace Language_ko_KR { PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("노즐 ~"); PROGMEM Language_Str MSG_BED = _UxGT("베드"); PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("펜 속도"); - PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("펜 속도 ="); + PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("펜 속도 ~"); PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("엑스트라 펜 속도"); - PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("엑스트라 펜 속도 ="); + PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("엑스트라 펜 속도 ~"); PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("온도"); PROGMEM Language_Str MSG_MOTION = _UxGT("동작"); PROGMEM Language_Str MSG_STORE_EEPROM = _UxGT("설정 저장하기"); diff --git a/Marlin/src/lcd/language/language_nl.h b/Marlin/src/lcd/language/language_nl.h index 7a26e1f24f..1d9955c811 100644 --- a/Marlin/src/lcd/language/language_nl.h +++ b/Marlin/src/lcd/language/language_nl.h @@ -99,7 +99,7 @@ namespace Language_nl { PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("Nozzle ~"); PROGMEM Language_Str MSG_BED = _UxGT("Bed"); PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Fan snelheid"); - PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Fan snelheid ="); + PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Fan snelheid ~"); PROGMEM Language_Str MSG_FLOW = _UxGT("Flow"); PROGMEM Language_Str MSG_FLOW_N = _UxGT("Flow ~"); PROGMEM Language_Str MSG_CONTROL = _UxGT("Control"); diff --git a/Marlin/src/lcd/language/language_pl.h b/Marlin/src/lcd/language/language_pl.h index 41559b9d84..b9bb9541e7 100644 --- a/Marlin/src/lcd/language/language_pl.h +++ b/Marlin/src/lcd/language/language_pl.h @@ -240,9 +240,9 @@ namespace Language_pl { PROGMEM Language_Str MSG_BED = _UxGT("Stół"); PROGMEM Language_Str MSG_CHAMBER = _UxGT("Obudowa"); PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Obroty wiatraka"); - PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Obroty wiatraka ="); + PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Obroty wiatraka ~"); PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("Obroty dodatkowego wiatraka"); - PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Obroty dodatkowego wiatraka ="); + PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Obroty dodatkowego wiatraka ~"); PROGMEM Language_Str MSG_FLOW = _UxGT("Przepływ"); PROGMEM Language_Str MSG_FLOW_N = _UxGT("Przepływ ~"); PROGMEM Language_Str MSG_CONTROL = _UxGT("Ustawienia"); diff --git a/Marlin/src/lcd/language/language_pt.h b/Marlin/src/lcd/language/language_pt.h index ce2fbd944e..b96839e1f6 100644 --- a/Marlin/src/lcd/language/language_pt.h +++ b/Marlin/src/lcd/language/language_pt.h @@ -89,7 +89,7 @@ namespace Language_pt { PROGMEM Language_Str MSG_NOZZLE_N = " " LCD_STR_THERMOMETER _UxGT(" Bico ~"); PROGMEM Language_Str MSG_BED = " " LCD_STR_THERMOMETER _UxGT(" Base"); PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Vel. ventoinha"); - PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Vel. ventoinha ="); + PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Vel. ventoinha ~"); PROGMEM Language_Str MSG_FLOW = _UxGT("Fluxo"); PROGMEM Language_Str MSG_FLOW_N = _UxGT("Fluxo ~"); PROGMEM Language_Str MSG_CONTROL = _UxGT("Controlo"); diff --git a/Marlin/src/lcd/language/language_pt_br.h b/Marlin/src/lcd/language/language_pt_br.h index 108af5a5ad..93451bc971 100644 --- a/Marlin/src/lcd/language/language_pt_br.h +++ b/Marlin/src/lcd/language/language_pt_br.h @@ -207,9 +207,9 @@ namespace Language_pt_br { PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("Bocal ~"); PROGMEM Language_Str MSG_BED = _UxGT("Mesa"); PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Vel. Ventoinha"); - PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Vel. Ventoinha ="); + PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Vel. Ventoinha ~"); PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("+Vel. Ventoinha"); - PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("+Vel. Ventoinha ="); + PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("+Vel. Ventoinha ~"); PROGMEM Language_Str MSG_FLOW = _UxGT("Vazão"); PROGMEM Language_Str MSG_FLOW_N = _UxGT("Vazão ~"); PROGMEM Language_Str MSG_CONTROL = _UxGT("Controle"); diff --git a/Marlin/src/lcd/language/language_sk.h b/Marlin/src/lcd/language/language_sk.h index e701408875..3487519498 100644 --- a/Marlin/src/lcd/language/language_sk.h +++ b/Marlin/src/lcd/language/language_sk.h @@ -243,9 +243,9 @@ namespace Language_sk { PROGMEM Language_Str MSG_BED = _UxGT("Podložka"); PROGMEM Language_Str MSG_CHAMBER = _UxGT("Komora"); PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Rýchlosť vent."); - PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Rýchlosť vent. ="); + PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Rýchlosť vent. ~"); PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("Rýchlosť ex. vent."); - PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Rýchlosť ex. vent. ="); + PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Rýchlosť ex. vent. ~"); PROGMEM Language_Str MSG_FLOW = _UxGT("Prietok"); PROGMEM Language_Str MSG_FLOW_N = _UxGT("Prietok ~"); PROGMEM Language_Str MSG_CONTROL = _UxGT("Ovládanie"); diff --git a/Marlin/src/lcd/language/language_tr.h b/Marlin/src/lcd/language/language_tr.h index e683e224ab..e68b62228d 100644 --- a/Marlin/src/lcd/language/language_tr.h +++ b/Marlin/src/lcd/language/language_tr.h @@ -210,9 +210,9 @@ namespace Language_tr { PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("Nozul ~"); PROGMEM Language_Str MSG_BED = _UxGT("Tabla"); PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Fan Hızı"); - PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Fan Hızı ="); + PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Fan Hızı ~"); PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("Ekstra Fan Hızı"); - PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Ekstra Fan Hızı ="); + PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Ekstra Fan Hızı ~"); PROGMEM Language_Str MSG_FLOW = _UxGT("Akış"); PROGMEM Language_Str MSG_FLOW_N = _UxGT("Akış ~"); PROGMEM Language_Str MSG_CONTROL = _UxGT("Kontrol"); diff --git a/Marlin/src/lcd/language/language_uk.h b/Marlin/src/lcd/language/language_uk.h index 3afe4e96ee..78e0cf7cfb 100644 --- a/Marlin/src/lcd/language/language_uk.h +++ b/Marlin/src/lcd/language/language_uk.h @@ -92,7 +92,7 @@ namespace Language_uk { PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("Сопло ~"); PROGMEM Language_Str MSG_BED = _UxGT("Стіл"); PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Охолодж."); - PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Охолодж. ="); + PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Охолодж. ~"); PROGMEM Language_Str MSG_FLOW = _UxGT("Потік"); PROGMEM Language_Str MSG_FLOW_N = _UxGT("Потік ~"); PROGMEM Language_Str MSG_CONTROL = _UxGT("Налаштування"); diff --git a/Marlin/src/lcd/language/language_vi.h b/Marlin/src/lcd/language/language_vi.h index c12e0e2f6b..6a42933c19 100644 --- a/Marlin/src/lcd/language/language_vi.h +++ b/Marlin/src/lcd/language/language_vi.h @@ -210,9 +210,9 @@ namespace Language_vi { PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("Đầu phun ~"); // Nozzle PROGMEM Language_Str MSG_BED = _UxGT("Bàn"); // bed PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Tốc độ quạt"); // fan speed - PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Tốc độ quạt ="); // fan speed + PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Tốc độ quạt ~"); // fan speed PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("Tốc độ quạt phụ"); // Extra fan speed - PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Tốc độ quạt phụ ="); // Extra fan speed + PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Tốc độ quạt phụ ~"); // Extra fan speed PROGMEM Language_Str MSG_FLOW = _UxGT("Lưu Lượng"); PROGMEM Language_Str MSG_FLOW_N = _UxGT("Lưu Lượng ~"); PROGMEM Language_Str MSG_CONTROL = _UxGT("Điều khiển"); // Control diff --git a/Marlin/src/lcd/language/language_zh_CN.h b/Marlin/src/lcd/language/language_zh_CN.h index e15b018843..9a52ac2f82 100644 --- a/Marlin/src/lcd/language/language_zh_CN.h +++ b/Marlin/src/lcd/language/language_zh_CN.h @@ -187,9 +187,9 @@ namespace Language_zh_CN { PROGMEM Language_Str MSG_NOZZLE_N = " " LCD_STR_THERMOMETER _UxGT(" 喷嘴 ~"); //"Nozzle" 噴嘴 PROGMEM Language_Str MSG_BED = " " LCD_STR_THERMOMETER _UxGT(" 热床"); //"Bed" PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("风扇速率"); //"Fan speed" - PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("风扇速率 ="); //"Fan speed" + PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("风扇速率 ~"); //"Fan speed" PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("额外风扇速率"); // "Extra fan speed" - PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("额外风扇速率 ="); // "Extra fan speed" + PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("额外风扇速率 ~"); // "Extra fan speed" PROGMEM Language_Str MSG_FLOW = _UxGT("挤出速率"); //"Flow" PROGMEM Language_Str MSG_FLOW_N = _UxGT("挤出速率 ~"); //"Flow" PROGMEM Language_Str MSG_CONTROL = _UxGT("控制"); //"Control" diff --git a/Marlin/src/lcd/language/language_zh_TW.h b/Marlin/src/lcd/language/language_zh_TW.h index 7d38694911..92343b3efa 100644 --- a/Marlin/src/lcd/language/language_zh_TW.h +++ b/Marlin/src/lcd/language/language_zh_TW.h @@ -187,9 +187,9 @@ namespace Language_zh_TW { PROGMEM Language_Str MSG_NOZZLE_N = " " LCD_STR_THERMOMETER _UxGT(" 噴嘴 ~"); PROGMEM Language_Str MSG_BED = " " LCD_STR_THERMOMETER _UxGT(" 熱床"); //"Bed" PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("風扇速率"); //"Fan speed" - PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("風扇速率 ="); + PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("風扇速率 ~"); PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("額外風扇速率"); // "Extra fan speed" - PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("額外風扇速率 ="); + PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("額外風扇速率 ~"); PROGMEM Language_Str MSG_FLOW = _UxGT("擠出速率"); PROGMEM Language_Str MSG_FLOW_N = _UxGT("擠出速率 ~"); //"Flow" PROGMEM Language_Str MSG_CONTROL = _UxGT("控制"); //"Control" diff --git a/Marlin/src/lcd/menu/menu.h b/Marlin/src/lcd/menu/menu.h index de8d24e1fd..5c7fc77306 100644 --- a/Marlin/src/lcd/menu/menu.h +++ b/Marlin/src/lcd/menu/menu.h @@ -30,7 +30,7 @@ extern int8_t encoderLine, encoderTopLine, screen_items; #if HOTENDS - constexpr int16_t heater_maxtemp[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP, HEATER_5_MAXTEMP); + constexpr int16_t heater_maxtemp[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP, HEATER_5_MAXTEMP, HEATER_6_MAXTEMP, HEATER_7_MAXTEMP); #endif void scroll_screen(const uint8_t limit, const bool is_menu); diff --git a/Marlin/src/lcd/menu/menu_advanced.cpp b/Marlin/src/lcd/menu/menu_advanced.cpp index 9b59952b49..e24b415155 100644 --- a/Marlin/src/lcd/menu/menu_advanced.cpp +++ b/Marlin/src/lcd/menu/menu_advanced.cpp @@ -245,6 +245,12 @@ void menu_cancelobject(); DEFINE_PIDTEMP_FUNCS(4); #if HOTENDS > 5 DEFINE_PIDTEMP_FUNCS(5); + #if HOTENDS > 6 + DEFINE_PIDTEMP_FUNCS(6); + #if HOTENDS > 7 + DEFINE_PIDTEMP_FUNCS(7); + #endif // HOTENDS > 7 + #endif // HOTENDS > 6 #endif // HOTENDS > 5 #endif // HOTENDS > 4 #endif // HOTENDS > 3 @@ -330,6 +336,12 @@ void menu_cancelobject(); PID_EDIT_MENU_ITEMS(4); #if HOTENDS > 5 PID_EDIT_MENU_ITEMS(5); + #if HOTENDS > 6 + PID_EDIT_MENU_ITEMS(6); + #if HOTENDS > 7 + PID_EDIT_MENU_ITEMS(7); + #endif // HOTENDS > 7 + #endif // HOTENDS > 6 #endif // HOTENDS > 5 #endif // HOTENDS > 4 #endif // HOTENDS > 3 diff --git a/Marlin/src/lcd/menu/menu_info.cpp b/Marlin/src/lcd/menu/menu_info.cpp index 71467093ec..5bbc8ce7dc 100644 --- a/Marlin/src/lcd/menu/menu_info.cpp +++ b/Marlin/src/lcd/menu/menu_info.cpp @@ -152,6 +152,24 @@ void menu_info_thermistors() { VALUE_ITEM_P(MSG_INFO_MAX_TEMP, STRINGIFY(HEATER_5_MAXTEMP), SS_LEFT); #endif + #if TEMP_SENSOR_6 != 0 + #undef THERMISTOR_ID + #define THERMISTOR_ID TEMP_SENSOR_6 + #include "../thermistornames.h" + STATIC_ITEM_P(PSTR(LCD_STR_E6 ": " THERMISTOR_NAME), SS_INVERT); + VALUE_ITEM_P(MSG_INFO_MIN_TEMP, STRINGIFY(HEATER_6_MINTEMP), SS_LEFT); + VALUE_ITEM_P(MSG_INFO_MAX_TEMP, STRINGIFY(HEATER_6_MAXTEMP), SS_LEFT); + #endif + + #if TEMP_SENSOR_7 != 0 + #undef THERMISTOR_ID + #define THERMISTOR_ID TEMP_SENSOR_7 + #include "../thermistornames.h" + STATIC_ITEM_P(PSTR(LCD_STR_E7 ": " THERMISTOR_NAME), SS_INVERT); + VALUE_ITEM_P(MSG_INFO_MIN_TEMP, STRINGIFY(HEATER_7_MINTEMP), SS_LEFT); + VALUE_ITEM_P(MSG_INFO_MAX_TEMP, STRINGIFY(HEATER_7_MAXTEMP), SS_LEFT); + #endif + #if EXTRUDERS { STATIC_ITEM( diff --git a/Marlin/src/lcd/menu/menu_temperature.cpp b/Marlin/src/lcd/menu/menu_temperature.cpp index 2713f9fe78..d2483b9d3f 100644 --- a/Marlin/src/lcd/menu/menu_temperature.cpp +++ b/Marlin/src/lcd/menu/menu_temperature.cpp @@ -198,33 +198,72 @@ void menu_temperature() { // Fan Speed: // #if FAN_COUNT > 0 + + auto on_fan_update = []{ + thermalManager.set_fan_speed(MenuItemBase::itemIndex, editable.uint8); + }; + + #if HAS_FAN1 || HAS_FAN2 || HAS_FAN3 || HAS_FAN4 || HAS_FAN5 || HAS_FAN6 || HAS_FAN7 + auto fan_edit_items = [&](const uint8_t f) { + editable.uint8 = thermalManager.fan_speed[f]; + EDIT_ITEM_FAST_N(percent, f, MSG_FAN_SPEED_N, &editable.uint8, 0, 255, on_fan_update); + #if ENABLED(EXTRA_FAN_SPEED) + EDIT_ITEM_FAST_N(percent, f, MSG_EXTRA_FAN_SPEED_N, &thermalManager.new_fan_speed[f], 3, 255); + #endif + }; + #endif + + #define SNFAN(N) (ENABLED(SINGLENOZZLE) && !HAS_FAN##N && EXTRUDERS > N) + #if SNFAN(1) || SNFAN(2) || SNFAN(3) || SNFAN(4) || SNFAN(5) || SNFAN(6) || SNFAN(7) + auto singlenozzle_item = [&](const uint8_t f) { + editable.uint8 = thermalManager.fan_speed[f]; + EDIT_ITEM_FAST_N(percent, f, MSG_STORED_FAN_N, &editable.uint8, 0, 255, on_fan_update); + }; + #endif + #if HAS_FAN0 editable.uint8 = thermalManager.fan_speed[0]; - EDIT_ITEM_FAST_N(percent, 1, MSG_FIRST_FAN_SPEED, &editable.uint8, 0, 255, []{ thermalManager.set_fan_speed(0, editable.uint8); }); + EDIT_ITEM_FAST_N(percent, 0, MSG_FIRST_FAN_SPEED, &editable.uint8, 0, 255, on_fan_update); #if ENABLED(EXTRA_FAN_SPEED) - EDIT_ITEM_FAST_N(percent, 1, MSG_FIRST_EXTRA_FAN_SPEED, &thermalManager.new_fan_speed[0], 3, 255); + EDIT_ITEM_FAST_N(percent, 0, MSG_FIRST_EXTRA_FAN_SPEED, &thermalManager.new_fan_speed[0], 3, 255); #endif #endif #if HAS_FAN1 - editable.uint8 = thermalManager.fan_speed[1]; - EDIT_ITEM_FAST_N(percent, 2, MSG_FAN_SPEED_N, &editable.uint8, 0, 255, []{ thermalManager.set_fan_speed(1, editable.uint8); }); - #if ENABLED(EXTRA_FAN_SPEED) - EDIT_ITEM_FAST_N(percent, 2, MSG_EXTRA_FAN_SPEED_N, &thermalManager.new_fan_speed[1], 3, 255); - #endif - #elif ENABLED(SINGLENOZZLE) && EXTRUDERS > 1 - editable.uint8 = thermalManager.fan_speed[1]; - EDIT_ITEM_FAST_N(percent, 2, MSG_STORED_FAN_N, &editable.uint8, 0, 255, []{ thermalManager.set_fan_speed(1, editable.uint8); }); + fan_edit_items(1); + #elif SNFAN(1) + singlenozzle_item(1); #endif #if HAS_FAN2 - editable.uint8 = thermalManager.fan_speed[2]; - EDIT_ITEM_FAST_N(percent, 3, MSG_FAN_SPEED_N, &editable.uint8, 0, 255, []{ thermalManager.set_fan_speed(2, editable.uint8); }); - #if ENABLED(EXTRA_FAN_SPEED) - EDIT_ITEM_FAST_N(percent, 3, MSG_EXTRA_FAN_SPEED_N, &thermalManager.new_fan_speed[2], 3, 255); - #endif - #elif ENABLED(SINGLENOZZLE) && EXTRUDERS > 2 - editable.uint8 = thermalManager.fan_speed[2]; - EDIT_ITEM_FAST_N(percent, 3, MSG_STORED_FAN_N, &editable.uint8, 0, 255, []{ thermalManager.set_fan_speed(2, editable.uint8); }); + fan_edit_items(2); + #elif SNFAN(2) + singlenozzle_item(1); + #endif + #if HAS_FAN3 + fan_edit_items(3); + #elif SNFAN(3) + singlenozzle_item(1); + #endif + #if HAS_FAN4 + fan_edit_items(4); + #elif SNFAN(4) + singlenozzle_item(1); #endif + #if HAS_FAN5 + fan_edit_items(5); + #elif SNFAN(5) + singlenozzle_item(1); + #endif + #if HAS_FAN6 + fan_edit_items(6); + #elif SNFAN(6) + singlenozzle_item(1); + #endif + #if HAS_FAN7 + fan_edit_items(7); + #elif SNFAN(7) + singlenozzle_item(1); + #endif + #endif // FAN_COUNT > 0 #if HAS_TEMP_HOTEND @@ -232,7 +271,7 @@ void menu_temperature() { // // Preheat for Material 1 and 2 // - #if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_3 != 0 || TEMP_SENSOR_4 != 0 || TEMP_SENSOR_5 != 0 || HAS_HEATED_BED + #if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_3 != 0 || TEMP_SENSOR_4 != 0 || TEMP_SENSOR_5 != 0 || TEMP_SENSOR_6 != 0 || TEMP_SENSOR_7 != 0 || HAS_HEATED_BED SUBMENU(MSG_PREHEAT_1, menu_preheat_m1); SUBMENU(MSG_PREHEAT_2, menu_preheat_m2); #else diff --git a/Marlin/src/lcd/menu/menu_tmc.cpp b/Marlin/src/lcd/menu/menu_tmc.cpp index 054b4e61f3..ff6a50ccfc 100644 --- a/Marlin/src/lcd/menu/menu_tmc.cpp +++ b/Marlin/src/lcd/menu/menu_tmc.cpp @@ -79,6 +79,12 @@ void menu_tmc_current() { #if AXIS_IS_TMC(E5) TMC_EDIT_STORED_I_RMS(E5, LCD_STR_E5); #endif + #if AXIS_IS_TMC(E6) + TMC_EDIT_STORED_I_RMS(E6, LCD_STR_E6); + #endif + #if AXIS_IS_TMC(E7) + TMC_EDIT_STORED_I_RMS(E7, LCD_STR_E7); + #endif END_MENU(); } @@ -131,6 +137,12 @@ void menu_tmc_current() { #if AXIS_HAS_STEALTHCHOP(E5) TMC_EDIT_STORED_HYBRID_THRS(E5, LCD_STR_E5); #endif + #if AXIS_HAS_STEALTHCHOP(E6) + TMC_EDIT_STORED_HYBRID_THRS(E6, LCD_STR_E6); + #endif + #if AXIS_HAS_STEALTHCHOP(E7) + TMC_EDIT_STORED_HYBRID_THRS(E7, LCD_STR_E7); + #endif END_MENU(); } @@ -210,6 +222,12 @@ void menu_tmc_current() { #if AXIS_HAS_STEALTHCHOP(E5) TMC_EDIT_STEP_MODE(E5, LCD_STR_E5); #endif + #if AXIS_HAS_STEALTHCHOP(E6) + TMC_EDIT_STEP_MODE(E6, LCD_STR_E6); + #endif + #if AXIS_HAS_STEALTHCHOP(E7) + TMC_EDIT_STEP_MODE(E7, LCD_STR_E7); + #endif END_MENU(); } diff --git a/Marlin/src/lcd/menu/menu_tune.cpp b/Marlin/src/lcd/menu/menu_tune.cpp index 1ece7f6ce5..1610c2d5eb 100644 --- a/Marlin/src/lcd/menu/menu_tune.cpp +++ b/Marlin/src/lcd/menu/menu_tune.cpp @@ -147,33 +147,72 @@ void menu_tune() { // Fan Speed: // #if FAN_COUNT > 0 + + auto on_fan_update = []{ + thermalManager.set_fan_speed(MenuItemBase::itemIndex, editable.uint8); + }; + + #if HAS_FAN1 || HAS_FAN2 || HAS_FAN3 || HAS_FAN4 || HAS_FAN5 || HAS_FAN6 || HAS_FAN7 + auto fan_edit_items = [&](const uint8_t f) { + editable.uint8 = thermalManager.fan_speed[f]; + EDIT_ITEM_FAST_N(percent, f, MSG_FAN_SPEED_N, &editable.uint8, 0, 255, on_fan_update); + #if ENABLED(EXTRA_FAN_SPEED) + EDIT_ITEM_FAST_N(percent, f, MSG_EXTRA_FAN_SPEED_N, &thermalManager.new_fan_speed[f], 3, 255); + #endif + }; + #endif + + #define SNFAN(N) (ENABLED(SINGLENOZZLE) && !HAS_FAN##N && EXTRUDERS > N) + #if SNFAN(1) || SNFAN(2) || SNFAN(3) || SNFAN(4) || SNFAN(5) || SNFAN(6) || SNFAN(7) + auto singlenozzle_item = [&](const uint8_t f) { + editable.uint8 = thermalManager.fan_speed[f]; + EDIT_ITEM_FAST_N(percent, f, MSG_STORED_FAN_N, &editable.uint8, 0, 255, on_fan_update); + }; + #endif + #if HAS_FAN0 editable.uint8 = thermalManager.fan_speed[0]; - EDIT_ITEM_FAST_N(percent, 1, MSG_FIRST_FAN_SPEED, &editable.uint8, 0, 255, []{ thermalManager.set_fan_speed(0, editable.uint8); }); + EDIT_ITEM_FAST_N(percent, 0, MSG_FIRST_FAN_SPEED, &editable.uint8, 0, 255, on_fan_update); #if ENABLED(EXTRA_FAN_SPEED) - EDIT_ITEM_FAST_N(percent, 1, MSG_FIRST_EXTRA_FAN_SPEED, &thermalManager.new_fan_speed[0], 3, 255); + EDIT_ITEM_FAST_N(percent, 0, MSG_FIRST_EXTRA_FAN_SPEED, &thermalManager.new_fan_speed[0], 3, 255); #endif #endif #if HAS_FAN1 - editable.uint8 = thermalManager.fan_speed[1]; - EDIT_ITEM_FAST_N(percent, 2, MSG_FAN_SPEED_N, &editable.uint8, 0, 255, []{ thermalManager.set_fan_speed(1, editable.uint8); }); - #if ENABLED(EXTRA_FAN_SPEED) - EDIT_ITEM_FAST_N(percent, 2, MSG_EXTRA_FAN_SPEED_N, &thermalManager.new_fan_speed[1], 3, 255); - #endif - #elif ENABLED(SINGLENOZZLE) && EXTRUDERS > 1 - editable.uint8 = thermalManager.fan_speed[1]; - EDIT_ITEM_FAST_N(percent, 2, MSG_STORED_FAN_N, &editable.uint8, 0, 255, []{ thermalManager.set_fan_speed(1, editable.uint8); }); + fan_edit_items(1); + #elif SNFAN(1) + singlenozzle_item(1); #endif #if HAS_FAN2 - editable.uint8 = thermalManager.fan_speed[2]; - EDIT_ITEM_FAST_N(percent, 3, MSG_FAN_SPEED_N, &editable.uint8, 0, 255, []{ thermalManager.set_fan_speed(2, editable.uint8); }); - #if ENABLED(EXTRA_FAN_SPEED) - EDIT_ITEM_FAST_N(percent, 3, MSG_EXTRA_FAN_SPEED_N, &thermalManager.new_fan_speed[2], 3, 255); - #endif - #elif ENABLED(SINGLENOZZLE) && EXTRUDERS > 2 - editable.uint8 = thermalManager.fan_speed[2]; - EDIT_ITEM_FAST_N(percent, 3, MSG_STORED_FAN_N, &editable.uint8, 0, 255, []{ thermalManager.set_fan_speed(2, editable.uint8); }); + fan_edit_items(2); + #elif SNFAN(2) + singlenozzle_item(1); + #endif + #if HAS_FAN3 + fan_edit_items(3); + #elif SNFAN(3) + singlenozzle_item(1); + #endif + #if HAS_FAN4 + fan_edit_items(4); + #elif SNFAN(4) + singlenozzle_item(1); #endif + #if HAS_FAN5 + fan_edit_items(5); + #elif SNFAN(5) + singlenozzle_item(1); + #endif + #if HAS_FAN6 + fan_edit_items(6); + #elif SNFAN(6) + singlenozzle_item(1); + #endif + #if HAS_FAN7 + fan_edit_items(7); + #elif SNFAN(7) + singlenozzle_item(1); + #endif + #endif // FAN_COUNT > 0 // diff --git a/Marlin/src/libs/L64XX/L64XX_Marlin.cpp b/Marlin/src/libs/L64XX/L64XX_Marlin.cpp index ebd648f208..cfa28586b6 100644 --- a/Marlin/src/libs/L64XX/L64XX_Marlin.cpp +++ b/Marlin/src/libs/L64XX/L64XX_Marlin.cpp @@ -39,7 +39,7 @@ L64XX_Marlin L64xxManager; void echo_yes_no(const bool yes) { serialprintPGM(yes ? PSTR(" YES") : PSTR(" NO ")); } -char L64XX_Marlin::index_to_axis[MAX_L64XX][3] = { "X ", "Y ", "Z ", "X2", "Y2", "Z2", "Z3", "Z4", "E0", "E1", "E2", "E3", "E4", "E5" }; +char L64XX_Marlin::index_to_axis[MAX_L64XX][3] = { "X ", "Y ", "Z ", "X2", "Y2", "Z2", "Z3", "Z4", "E0", "E1", "E2", "E3", "E4", "E5", "E6", "E7" }; #define DEBUG_OUT ENABLED(L6470_CHITCHAT) #include "../../core/debug_out.h" @@ -69,6 +69,8 @@ uint8_t L64XX_Marlin::index_to_dir[MAX_L64XX] = { (INVERT_X_DIR), (INVERT_E3_DIR), // 11 E3 (INVERT_E4_DIR), // 12 E4 (INVERT_E5_DIR), // 13 E5 + (INVERT_E6_DIR), // 14 E6 + (INVERT_E7_DIR) // 15 E7 }; volatile uint8_t L64XX_Marlin::spi_abort = false; diff --git a/Marlin/src/libs/L64XX/L64XX_Marlin.h b/Marlin/src/libs/L64XX/L64XX_Marlin.h index 325f60d5fa..9c233fdf03 100644 --- a/Marlin/src/libs/L64XX/L64XX_Marlin.h +++ b/Marlin/src/libs/L64XX/L64XX_Marlin.h @@ -35,7 +35,7 @@ #define dSPIN_STEP_CLOCK_REV dSPIN_STEP_CLOCK+1 #define HAS_L64XX_EXTRUDER (AXIS_IS_L64XX(E0) || AXIS_IS_L64XX(E1) || AXIS_IS_L64XX(E2) || AXIS_IS_L64XX(E3) || AXIS_IS_L64XX(E4) || AXIS_IS_L64XX(E5)) -enum L64XX_axis_t : uint8_t { X, Y, Z, X2, Y2, Z2, Z3, Z4, E0, E1, E2, E3, E4, E5, MAX_L64XX }; +enum L64XX_axis_t : uint8_t { X, Y, Z, X2, Y2, Z2, Z3, Z4, E0, E1, E2, E3, E4, E5, E6, E7, MAX_L64XX }; class L64XX_Marlin : public L64XXHelper { public: diff --git a/Marlin/src/libs/softspi.h b/Marlin/src/libs/softspi.h index 39d56b26f7..5623496d9d 100644 --- a/Marlin/src/libs/softspi.h +++ b/Marlin/src/libs/softspi.h @@ -66,7 +66,7 @@ * @return value read */ FORCE_INLINE static bool fastDigitalRead(uint8_t pin) { - return g_APinDescription[pin].pPort->PIO_PDSR & g_APinDescription[pin].ulPin; + return digitalRead(pin); } /** @@ -75,10 +75,7 @@ * @param[in] level value to write */ FORCE_INLINE static void fastDigitalWrite(uint8_t pin, bool value) { - if (value) - g_APinDescription[pin].pPort->PIO_SODR = g_APinDescription[pin].ulPin; - else - g_APinDescription[pin].pPort->PIO_CODR = g_APinDescription[pin].ulPin; + digitalWrite(pin, value); } #endif // !CORE_TEENSY diff --git a/Marlin/src/module/configuration_store.cpp b/Marlin/src/module/configuration_store.cpp index f87ff8a5da..85b0b850b0 100644 --- a/Marlin/src/module/configuration_store.cpp +++ b/Marlin/src/module/configuration_store.cpp @@ -1008,6 +1008,16 @@ void MarlinSettings::postprocess() { #if AXIS_IS_TMC(E5) tmc_stepper_current.E5 = stepperE5.getMilliamps(); #endif + #if MAX_EXTRUDERS > 6 + #if AXIS_IS_TMC(E6) + tmc_stepper_current.E6 = stepperE6.getMilliamps(); + #endif + #if MAX_EXTRUDERS > 7 + #if AXIS_IS_TMC(E7) + tmc_stepper_current.E7 = stepperE7.getMilliamps(); + #endif + #endif // MAX_EXTRUDERS > 7 + #endif // MAX_EXTRUDERS > 6 #endif // MAX_EXTRUDERS > 5 #endif // MAX_EXTRUDERS > 4 #endif // MAX_EXTRUDERS > 3 @@ -1074,6 +1084,16 @@ void MarlinSettings::postprocess() { #if AXIS_HAS_STEALTHCHOP(E5) tmc_hybrid_threshold.E5 = stepperE5.get_pwm_thrs(); #endif + #if MAX_EXTRUDERS > 6 + #if AXIS_HAS_STEALTHCHOP(E6) + tmc_hybrid_threshold.E6 = stepperE6.get_pwm_thrs(); + #endif + #if MAX_EXTRUDERS > 7 + #if AXIS_HAS_STEALTHCHOP(E7) + tmc_hybrid_threshold.E7 = stepperE7.get_pwm_thrs(); + #endif + #endif // MAX_EXTRUDERS > 7 + #endif // MAX_EXTRUDERS > 6 #endif // MAX_EXTRUDERS > 5 #endif // MAX_EXTRUDERS > 4 #endif // MAX_EXTRUDERS > 3 @@ -1170,6 +1190,16 @@ void MarlinSettings::postprocess() { #if AXIS_HAS_STEALTHCHOP(E5) tmc_stealth_enabled.E5 = stepperE5.get_stealthChop_status(); #endif + #if MAX_EXTRUDERS > 6 + #if AXIS_HAS_STEALTHCHOP(E6) + tmc_stealth_enabled.E6 = stepperE6.get_stealthChop_status(); + #endif + #if MAX_EXTRUDERS > 7 + #if AXIS_HAS_STEALTHCHOP(E7) + tmc_stealth_enabled.E7 = stepperE7.get_stealthChop_status(); + #endif + #endif // MAX_EXTRUDERS > 7 + #endif // MAX_EXTRUDERS > 6 #endif // MAX_EXTRUDERS > 5 #endif // MAX_EXTRUDERS > 4 #endif // MAX_EXTRUDERS > 3 @@ -2788,6 +2818,14 @@ void MarlinSettings::reset() { #if EXTRUDERS > 5 CONFIG_ECHO_START(); SERIAL_ECHOLNPAIR(" M200 T5 D", LINEAR_UNIT(planner.filament_size[5])); + #if EXTRUDERS > 6 + CONFIG_ECHO_START(); + SERIAL_ECHOLNPAIR(" M200 T6 D", LINEAR_UNIT(planner.filament_size[6])); + #if EXTRUDERS > 7 + CONFIG_ECHO_START(); + SERIAL_ECHOLNPAIR(" M200 T7 D", LINEAR_UNIT(planner.filament_size[7])); + #endif // EXTRUDERS > 7 + #endif // EXTRUDERS > 6 #endif // EXTRUDERS > 5 #endif // EXTRUDERS > 4 #endif // EXTRUDERS > 3 @@ -3528,6 +3566,12 @@ void MarlinSettings::reset() { _ECHO_603(4); #if EXTRUDERS > 5 _ECHO_603(5); + #if EXTRUDERS > 6 + _ECHO_603(6); + #if EXTRUDERS > 7 + _ECHO_603(7); + #endif // EXTRUDERS > 7 + #endif // EXTRUDERS > 6 #endif // EXTRUDERS > 5 #endif // EXTRUDERS > 4 #endif // EXTRUDERS > 3 diff --git a/Marlin/src/module/endstops.cpp b/Marlin/src/module/endstops.cpp index 27d5fb6fc7..7d8e270fed 100644 --- a/Marlin/src/module/endstops.cpp +++ b/Marlin/src/module/endstops.cpp @@ -486,14 +486,20 @@ void _O2 Endstops::report_states() { default: continue; case 1: pin = FIL_RUNOUT_PIN; break; case 2: pin = FIL_RUNOUT2_PIN; break; - #if NUM_RUNOUT_SENSORS > 2 + #if NUM_RUNOUT_SENSORS >= 3 case 3: pin = FIL_RUNOUT3_PIN; break; - #if NUM_RUNOUT_SENSORS > 3 + #if NUM_RUNOUT_SENSORS >= 4 case 4: pin = FIL_RUNOUT4_PIN; break; - #if NUM_RUNOUT_SENSORS > 4 + #if NUM_RUNOUT_SENSORS >= 5 case 5: pin = FIL_RUNOUT5_PIN; break; - #if NUM_RUNOUT_SENSORS > 5 + #if NUM_RUNOUT_SENSORS >= 6 case 6: pin = FIL_RUNOUT6_PIN; break; + #if NUM_RUNOUT_SENSORS >= 7 + case 7: pin = FIL_RUNOUT7_PIN; break; + #if NUM_RUNOUT_SENSORS >= 8 + case 8: pin = FIL_RUNOUT8_PIN; break; + #endif + #endif #endif #endif #endif diff --git a/Marlin/src/module/planner.cpp b/Marlin/src/module/planner.cpp index 4c3513c20a..0552206315 100644 --- a/Marlin/src/module/planner.cpp +++ b/Marlin/src/module/planner.cpp @@ -1308,7 +1308,21 @@ void Planner::check_axes_activity() { #if HAS_FAN2 FAN_SET(2); #endif - + #if HAS_FAN3 + FAN_SET(3); + #endif + #if HAS_FAN4 + FAN_SET(4); + #endif + #if HAS_FAN5 + FAN_SET(5); + #endif + #if HAS_FAN6 + FAN_SET(6); + #endif + #if HAS_FAN7 + FAN_SET(7); + #endif #endif // FAN_COUNT > 0 #if ENABLED(AUTOTEMP) diff --git a/Marlin/src/module/stepper.cpp b/Marlin/src/module/stepper.cpp index dec11245f5..6e4977984f 100644 --- a/Marlin/src/module/stepper.cpp +++ b/Marlin/src/module/stepper.cpp @@ -2140,6 +2140,12 @@ void Stepper::init() { #if HAS_E5_DIR E5_DIR_INIT(); #endif + #if HAS_E6_DIR + E6_DIR_INIT(); + #endif + #if HAS_E7_DIR + E7_DIR_INIT(); + #endif // Init Enable Pins - steppers default to disabled. #if HAS_X_ENABLE @@ -2198,6 +2204,14 @@ void Stepper::init() { E5_ENABLE_INIT(); if (!E_ENABLE_ON) E5_ENABLE_WRITE(HIGH); #endif + #if HAS_E6_ENABLE + E6_ENABLE_INIT(); + if (!E_ENABLE_ON) E6_ENABLE_WRITE(HIGH); + #endif + #if HAS_E7_ENABLE + E7_ENABLE_INIT(); + if (!E_ENABLE_ON) E7_ENABLE_WRITE(HIGH); + #endif #define _STEP_INIT(AXIS) AXIS ##_STEP_INIT() #define _WRITE_STEP(AXIS, HIGHLOW) AXIS ##_STEP_WRITE(HIGHLOW) @@ -2261,6 +2275,12 @@ void Stepper::init() { #if E_STEPPERS > 5 && HAS_E5_STEP E_AXIS_INIT(5); #endif + #if E_STEPPERS > 6 && HAS_E6_STEP + E_AXIS_INIT(6); + #endif + #if E_STEPPERS > 7 && HAS_E7_STEP + E_AXIS_INIT(7); + #endif #if DISABLED(I2S_STEPPER_STREAM) HAL_timer_start(STEP_TIMER_NUM, 122); // Init Stepper ISR to 122 Hz for quick starting @@ -2802,6 +2822,20 @@ void Stepper::report_positions() { SET_OUTPUT(E5_MS3_PIN); #endif #endif + #if HAS_E6_MICROSTEPS + SET_OUTPUT(E6_MS1_PIN); + SET_OUTPUT(E6_MS2_PIN); + #if PIN_EXISTS(E6_MS3) + SET_OUTPUT(E6_MS3_PIN); + #endif + #endif + #if HAS_E7_MICROSTEPS + SET_OUTPUT(E7_MS1_PIN); + SET_OUTPUT(E7_MS2_PIN); + #if PIN_EXISTS(E7_MS3) + SET_OUTPUT(E7_MS3_PIN); + #endif + #endif static const uint8_t microstep_modes[] = MICROSTEP_MODES; for (uint16_t i = 0; i < COUNT(microstep_modes); i++) @@ -2847,22 +2881,28 @@ void Stepper::report_positions() { break; #endif #if HAS_E0_MICROSTEPS - case 3: WRITE(E0_MS1_PIN, ms1); break; + case 3: WRITE(E0_MS1_PIN, ms1); break; #endif #if HAS_E1_MICROSTEPS - case 4: WRITE(E1_MS1_PIN, ms1); break; + case 4: WRITE(E1_MS1_PIN, ms1); break; #endif #if HAS_E2_MICROSTEPS - case 5: WRITE(E2_MS1_PIN, ms1); break; + case 5: WRITE(E2_MS1_PIN, ms1); break; #endif #if HAS_E3_MICROSTEPS - case 6: WRITE(E3_MS1_PIN, ms1); break; + case 6: WRITE(E3_MS1_PIN, ms1); break; #endif #if HAS_E4_MICROSTEPS - case 7: WRITE(E4_MS1_PIN, ms1); break; + case 7: WRITE(E4_MS1_PIN, ms1); break; #endif #if HAS_E5_MICROSTEPS - case 8: WRITE(E5_MS1_PIN, ms1); break; + case 8: WRITE(E5_MS1_PIN, ms1); break; + #endif + #if HAS_E6_MICROSTEPS + case 9: WRITE(E6_MS1_PIN, ms1); break; + #endif + #if HAS_E7_MICROSTEPS + case 10: WRITE(E7_MS1_PIN, ms1); break; #endif } if (ms2 >= 0) switch (driver) { @@ -2903,22 +2943,28 @@ void Stepper::report_positions() { break; #endif #if HAS_E0_MICROSTEPS - case 3: WRITE(E0_MS2_PIN, ms2); break; + case 3: WRITE(E0_MS2_PIN, ms2); break; #endif #if HAS_E1_MICROSTEPS - case 4: WRITE(E1_MS2_PIN, ms2); break; + case 4: WRITE(E1_MS2_PIN, ms2); break; #endif #if HAS_E2_MICROSTEPS - case 5: WRITE(E2_MS2_PIN, ms2); break; + case 5: WRITE(E2_MS2_PIN, ms2); break; #endif #if HAS_E3_MICROSTEPS - case 6: WRITE(E3_MS2_PIN, ms2); break; + case 6: WRITE(E3_MS2_PIN, ms2); break; #endif #if HAS_E4_MICROSTEPS - case 7: WRITE(E4_MS2_PIN, ms2); break; + case 7: WRITE(E4_MS2_PIN, ms2); break; #endif #if HAS_E5_MICROSTEPS - case 8: WRITE(E5_MS2_PIN, ms2); break; + case 8: WRITE(E5_MS2_PIN, ms2); break; + #endif + #if HAS_E6_MICROSTEPS + case 9: WRITE(E6_MS2_PIN, ms2); break; + #endif + #if HAS_E7_MICROSTEPS + case 10: WRITE(E7_MS2_PIN, ms2); break; #endif } if (ms3 >= 0) switch (driver) { @@ -2959,22 +3005,28 @@ void Stepper::report_positions() { break; #endif #if HAS_E0_MICROSTEPS && PIN_EXISTS(E0_MS3) - case 3: WRITE(E0_MS3_PIN, ms3); break; + case 3: WRITE(E0_MS3_PIN, ms3); break; #endif #if HAS_E1_MICROSTEPS && PIN_EXISTS(E1_MS3) - case 4: WRITE(E1_MS3_PIN, ms3); break; + case 4: WRITE(E1_MS3_PIN, ms3); break; #endif #if HAS_E2_MICROSTEPS && PIN_EXISTS(E2_MS3) - case 5: WRITE(E2_MS3_PIN, ms3); break; + case 5: WRITE(E2_MS3_PIN, ms3); break; #endif #if HAS_E3_MICROSTEPS && PIN_EXISTS(E3_MS3) - case 6: WRITE(E3_MS3_PIN, ms3); break; + case 6: WRITE(E3_MS3_PIN, ms3); break; #endif #if HAS_E4_MICROSTEPS && PIN_EXISTS(E4_MS3) - case 7: WRITE(E4_MS3_PIN, ms3); break; + case 7: WRITE(E4_MS3_PIN, ms3); break; #endif #if HAS_E5_MICROSTEPS && PIN_EXISTS(E5_MS3) - case 8: WRITE(E5_MS3_PIN, ms3); break; + case 8: WRITE(E5_MS3_PIN, ms3); break; + #endif + #if HAS_E6_MICROSTEPS && PIN_EXISTS(E6_MS3) + case 9: WRITE(E6_MS3_PIN, ms3); break; + #endif + #if HAS_E7_MICROSTEPS && PIN_EXISTS(E7_MS3) + case 10: WRITE(E7_MS3_PIN, ms3); break; #endif } } @@ -3084,6 +3136,22 @@ void Stepper::report_positions() { #endif ); #endif + #if HAS_E6_MICROSTEPS + SERIAL_ECHOPGM("E6: "); + SERIAL_CHAR('0' + READ(E6_MS1_PIN), '0' + READ(E6_MS2_PIN) + #if PIN_EXISTS(E6_MS3) + , '0' + READ(E6_MS3_PIN) + #endif + ); + #endif + #if HAS_E7_MICROSTEPS + SERIAL_ECHOPGM("E7: "); + SERIAL_CHAR('0' + READ(E7_MS1_PIN), '0' + READ(E7_MS2_PIN) + #if PIN_EXISTS(E7_MS3) + , '0' + READ(E7_MS3_PIN) + #endif + ); + #endif } #endif // HAS_MICROSTEPS diff --git a/Marlin/src/module/stepper/L64xx.h b/Marlin/src/module/stepper/L64xx.h index c7b2d1e20c..35b3d723de 100644 --- a/Marlin/src/module/stepper/L64xx.h +++ b/Marlin/src/module/stepper/L64xx.h @@ -278,3 +278,37 @@ #define E5_DIR_READ() (stepper##E5.getStatus() & STATUS_DIR); #endif #endif + +// E6 Stepper +#if AXIS_IS_L64XX(E6) + extern L64XX_CLASS(E6) stepperE6; + #define E6_ENABLE_INIT() NOOP + #define E6_ENABLE_WRITE(STATE) (STATE ? NOOP : stepperE6.free()) + #define E6_ENABLE_READ() (stepperE6.getStatus() & STATUS_HIZ) + #if AXIS_DRIVER_TYPE_E6(L6474) + #define E6_DIR_INIT() SET_OUTPUT(E6_DIR_PIN) + #define E6_DIR_WRITE(STATE) L6474_DIR_WRITE(E6, STATE) + #define E6_DIR_READ() READ(E6_DIR_PIN) + #else + #define E6_DIR_INIT() NOOP + #define E6_DIR_WRITE(STATE) L64XX_DIR_WRITE(E6, STATE) + #define E6_DIR_READ() (stepper##E6.getStatus() & STATUS_DIR); + #endif +#endif + +// E7 Stepper +#if AXIS_IS_L64XX(E7) + extern L64XX_CLASS(E7) stepperE7; + #define E7_ENABLE_INIT() NOOP + #define E7_ENABLE_WRITE(STATE) (STATE ? NOOP : stepperE7.free()) + #define E7_ENABLE_READ() (stepperE7.getStatus() & STATUS_HIZ) + #if AXIS_DRIVER_TYPE_E7(L6474) + #define E7_DIR_INIT() SET_OUTPUT(E7_DIR_PIN) + #define E7_DIR_WRITE(STATE) L6474_DIR_WRITE(E7, STATE) + #define E7_DIR_READ() READ(E7_DIR_PIN) + #else + #define E7_DIR_INIT() NOOP + #define E7_DIR_WRITE(STATE) L64XX_DIR_WRITE(E7, STATE) + #define E7_DIR_READ() (stepper##E7.getStatus() & STATUS_DIR); + #endif +#endif diff --git a/Marlin/src/module/stepper/TMC26X.h b/Marlin/src/module/stepper/TMC26X.h index f3914332cc..73cba31706 100644 --- a/Marlin/src/module/stepper/TMC26X.h +++ b/Marlin/src/module/stepper/TMC26X.h @@ -150,3 +150,19 @@ void tmc26x_init_to_defaults(); #define E5_ENABLE_WRITE(STATE) stepperE5.setEnabled(STATE) #define E5_ENABLE_READ() stepperE5.isEnabled() #endif + +// E6 Stepper +#if AXIS_DRIVER_TYPE_E6(TMC26X) + extern TMC26XStepper stepperE6; + #define E6_ENABLE_INIT() NOOP + #define E6_ENABLE_WRITE(STATE) stepperE6.setEnabled(STATE) + #define E6_ENABLE_READ() stepperE6.isEnabled() +#endif + +// E7 Stepper +#if AXIS_DRIVER_TYPE_E7(TMC26X) + extern TMC26XStepper stepperE7; + #define E7_ENABLE_INIT() NOOP + #define E7_ENABLE_WRITE(STATE) stepperE7.setEnabled(STATE) + #define E7_ENABLE_READ() stepperE7.isEnabled() +#endif diff --git a/Marlin/src/module/stepper/indirection.h b/Marlin/src/module/stepper/indirection.h index e88c526744..d05c7e3db3 100644 --- a/Marlin/src/module/stepper/indirection.h +++ b/Marlin/src/module/stepper/indirection.h @@ -303,26 +303,115 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset #endif #define E5_STEP_READ() bool(READ(E5_STEP_PIN)) +// E6 Stepper +#ifndef E6_ENABLE_INIT + #define E6_ENABLE_INIT() SET_OUTPUT(E6_ENABLE_PIN) + #define E6_ENABLE_WRITE(STATE) WRITE(E6_ENABLE_PIN,STATE) + #define E6_ENABLE_READ() bool(READ(E6_ENABLE_PIN)) +#endif +#ifndef E6_DIR_INIT + #define E6_DIR_INIT() SET_OUTPUT(E6_DIR_PIN) + #define E6_DIR_WRITE(STATE) WRITE(E6_DIR_PIN,STATE) + #define E6_DIR_READ() bool(READ(E6_DIR_PIN)) +#endif +#define E6_STEP_INIT() SET_OUTPUT(E6_STEP_PIN) +#ifndef E6_STEP_WRITE + #define E6_STEP_WRITE(STATE) WRITE(E6_STEP_PIN,STATE) +#endif +#define E6_STEP_READ() bool(READ(E6_STEP_PIN)) + +// E7 Stepper +#ifndef E7_ENABLE_INIT + #define E7_ENABLE_INIT() SET_OUTPUT(E7_ENABLE_PIN) + #define E7_ENABLE_WRITE(STATE) WRITE(E7_ENABLE_PIN,STATE) + #define E7_ENABLE_READ() bool(READ(E7_ENABLE_PIN)) +#endif +#ifndef E7_DIR_INIT + #define E7_DIR_INIT() SET_OUTPUT(E7_DIR_PIN) + #define E7_DIR_WRITE(STATE) WRITE(E7_DIR_PIN,STATE) + #define E7_DIR_READ() bool(READ(E7_DIR_PIN)) +#endif +#define E7_STEP_INIT() SET_OUTPUT(E7_STEP_PIN) +#ifndef E7_STEP_WRITE + #define E7_STEP_WRITE(STATE) WRITE(E7_STEP_PIN,STATE) +#endif +#define E7_STEP_READ() bool(READ(E7_STEP_PIN)) + /** * Extruder indirection for the single E axis */ #if ENABLED(SWITCHING_EXTRUDER) // One stepper driver per two extruders, reversed on odd index - #if EXTRUDERS > 5 + #if EXTRUDERS > 7 + #define E_STEP_WRITE(E,V) do{ if (E < 2) { E0_STEP_WRITE(V); } else if (E < 4) { E1_STEP_WRITE(V); } else if (E < 6) { E2_STEP_WRITE(V); } else { E3_STEP_WRITE(V); } }while(0) + #define NORM_E_DIR(E) do{ switch (E) { \ + case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E0_DIR_WRITE( INVERT_E0_DIR); break; \ + case 2: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 3: E1_DIR_WRITE( INVERT_E1_DIR); break; \ + case 4: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 5: E2_DIR_WRITE( INVERT_E2_DIR); break; \ + case 6: E3_DIR_WRITE( INVERT_E3_DIR); break; case 7: E3_DIR_WRITE( INVERT_E3_DIR); break; \ + } }while(0) + #define REV_E_DIR(E) do{ switch (E) { \ + case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(!INVERT_E0_DIR); break; \ + case 2: E1_DIR_WRITE( INVERT_E1_DIR); break; case 3: E1_DIR_WRITE(!INVERT_E1_DIR); break; \ + case 4: E2_DIR_WRITE( INVERT_E2_DIR); break; case 5: E2_DIR_WRITE(!INVERT_E2_DIR); break; \ + case 6: E3_DIR_WRITE(!INVERT_E3_DIR); break; case 7: E3_DIR_WRITE(!INVERT_E3_DIR); break; \ + } }while(0) + #elif EXTRUDERS > 6 + #define E_STEP_WRITE(E,V) do{ if (E < 2) { E0_STEP_WRITE(V); } else if (E < 4) { E1_STEP_WRITE(V); } else if (E < 6) { E2_STEP_WRITE(V); } else { E3_STEP_WRITE(V); } }while(0) + #define NORM_E_DIR(E) do{ switch (E) { \ + case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E0_DIR_WRITE( INVERT_E0_DIR); break; \ + case 2: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 3: E1_DIR_WRITE( INVERT_E1_DIR); break; \ + case 4: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 5: E2_DIR_WRITE( INVERT_E2_DIR); break; \ + case 6: E3_DIR_WRITE( INVERT_E3_DIR); break; \ + } }while(0) + #define REV_E_DIR(E) do{ switch (E) { \ + case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(!INVERT_E0_DIR); break; \ + case 2: E1_DIR_WRITE( INVERT_E1_DIR); break; case 3: E1_DIR_WRITE(!INVERT_E1_DIR); break; \ + case 4: E2_DIR_WRITE( INVERT_E2_DIR); break; case 5: E2_DIR_WRITE(!INVERT_E2_DIR); break; \ + case 6: E3_DIR_WRITE(!INVERT_E3_DIR); } }while(0) + #elif EXTRUDERS > 5 #define E_STEP_WRITE(E,V) do{ if (E < 2) { E0_STEP_WRITE(V); } else if (E < 4) { E1_STEP_WRITE(V); } else { E2_STEP_WRITE(V); } }while(0) - #define NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E0_DIR_WRITE( INVERT_E0_DIR); break; case 2: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 3: E1_DIR_WRITE( INVERT_E1_DIR); break; case 4: E2_DIR_WRITE(!INVERT_E2_DIR); case 5: E2_DIR_WRITE( INVERT_E2_DIR); } }while(0) - #define REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 2: E1_DIR_WRITE( INVERT_E1_DIR); break; case 3: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 4: E2_DIR_WRITE( INVERT_E2_DIR); case 5: E2_DIR_WRITE(!INVERT_E2_DIR); } }while(0) + #define NORM_E_DIR(E) do{ switch (E) { \ + case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E0_DIR_WRITE( INVERT_E0_DIR); break; \ + case 2: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 3: E1_DIR_WRITE( INVERT_E1_DIR); break; \ + case 4: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 5: E2_DIR_WRITE( INVERT_E2_DIR); break; \ + } }while(0) + #define REV_E_DIR(E) do{ switch (E) { \ + case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(!INVERT_E0_DIR); break; \ + case 2: E1_DIR_WRITE( INVERT_E1_DIR); break; case 3: E1_DIR_WRITE(!INVERT_E1_DIR); break; \ + case 4: E2_DIR_WRITE( INVERT_E2_DIR); break; case 5: E2_DIR_WRITE(!INVERT_E2_DIR); break; \ + } }while(0) #elif EXTRUDERS > 4 #define E_STEP_WRITE(E,V) do{ if (E < 2) { E0_STEP_WRITE(V); } else if (E < 4) { E1_STEP_WRITE(V); } else { E2_STEP_WRITE(V); } }while(0) - #define NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E0_DIR_WRITE( INVERT_E0_DIR); break; case 2: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 3: E1_DIR_WRITE( INVERT_E1_DIR); break; case 4: E2_DIR_WRITE(!INVERT_E2_DIR); } }while(0) - #define REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 2: E1_DIR_WRITE( INVERT_E1_DIR); break; case 3: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 4: E2_DIR_WRITE( INVERT_E2_DIR); } }while(0) + #define NORM_E_DIR(E) do{ switch (E) { \ + case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E0_DIR_WRITE( INVERT_E0_DIR); break; \ + case 2: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 3: E1_DIR_WRITE( INVERT_E1_DIR); break; \ + case 4: E2_DIR_WRITE(!INVERT_E2_DIR); break; \ + } }while(0) + #define REV_E_DIR(E) do{ switch (E) { \ + case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(!INVERT_E0_DIR); break; \ + case 2: E1_DIR_WRITE( INVERT_E1_DIR); break; case 3: E1_DIR_WRITE(!INVERT_E1_DIR); break; \ + case 4: E2_DIR_WRITE( INVERT_E2_DIR); break; \ + } }while(0) #elif EXTRUDERS > 3 #define E_STEP_WRITE(E,V) do{ if (E < 2) { E0_STEP_WRITE(V); } else { E1_STEP_WRITE(V); } }while(0) - #define NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E0_DIR_WRITE( INVERT_E0_DIR); break; case 2: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 3: E1_DIR_WRITE( INVERT_E1_DIR); } }while(0) - #define REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 2: E1_DIR_WRITE( INVERT_E1_DIR); break; case 3: E1_DIR_WRITE(!INVERT_E1_DIR); } }while(0) + #define NORM_E_DIR(E) do{ switch (E) { \ + case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E0_DIR_WRITE( INVERT_E0_DIR); break; \ + case 2: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 3: E1_DIR_WRITE( INVERT_E1_DIR); break; \ + } }while(0) + #define REV_E_DIR(E) do{ switch (E) { \ + case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(!INVERT_E0_DIR); break; \ + case 2: E1_DIR_WRITE( INVERT_E1_DIR); break; case 3: E1_DIR_WRITE(!INVERT_E1_DIR); break; \ + } }while(0) #elif EXTRUDERS > 2 #define E_STEP_WRITE(E,V) do{ if (E < 2) { E0_STEP_WRITE(V); } else { E1_STEP_WRITE(V); } }while(0) - #define NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E0_DIR_WRITE( INVERT_E0_DIR); break; case 2: E1_DIR_WRITE(!INVERT_E1_DIR); } }while(0) - #define REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 2: E1_DIR_WRITE( INVERT_E1_DIR); } }while(0) + #define NORM_E_DIR(E) do{ switch (E) { \ + case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E0_DIR_WRITE( INVERT_E0_DIR); break; \ + case 2: E1_DIR_WRITE(!INVERT_E1_DIR); break; \ + } }while(0) + #define REV_E_DIR(E) do{ switch (E) { \ + case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(!INVERT_E0_DIR); break; \ + case 2: E1_DIR_WRITE( INVERT_E1_DIR); break; \ + } }while(0) #else #define E_STEP_WRITE(E,V) E0_STEP_WRITE(V) #define NORM_E_DIR(E) do{ E0_DIR_WRITE(E ? INVERT_E0_DIR : !INVERT_E0_DIR); }while(0) @@ -340,23 +429,100 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset #elif E_STEPPERS > 1 - #if E_STEPPERS > 5 - #define _E_STEP_WRITE(E,V) do{ switch (E) { case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); break; case 3: E3_STEP_WRITE(V); break; case 4: E4_STEP_WRITE(V); case 5: E5_STEP_WRITE(V); } }while(0) - #define _NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); break; case 4: E4_DIR_WRITE(!INVERT_E4_DIR); case 5: E5_DIR_WRITE(!INVERT_E5_DIR); } }while(0) - #define _REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); break; case 4: E4_DIR_WRITE( INVERT_E4_DIR); case 5: E5_DIR_WRITE( INVERT_E5_DIR); } }while(0) + #if E_STEPPERS > 7 + + #define _E_STEP_WRITE(E,V) do{ switch (E) { \ + case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); break; case 3: E3_STEP_WRITE(V); break; \ + case 4: E4_STEP_WRITE(V); break; case 5: E5_STEP_WRITE(V); break; case 6: E6_STEP_WRITE(V); break; case 7: E7_STEP_WRITE(V); break; \ + } }while(0) + #define _NORM_E_DIR(E) do{ switch (E) { \ + case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; \ + case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); break; \ + case 4: E4_DIR_WRITE(!INVERT_E4_DIR); break; case 5: E5_DIR_WRITE(!INVERT_E5_DIR); break; \ + case 6: E6_DIR_WRITE(!INVERT_E6_DIR); break; case 7: E7_DIR_WRITE(!INVERT_E7_DIR); break; \ + } }while(0) + #define _REV_E_DIR(E) do{ switch (E) { \ + case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; \ + case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); break; \ + case 4: E4_DIR_WRITE( INVERT_E4_DIR); break; case 5: E5_DIR_WRITE( INVERT_E5_DIR); break; \ + case 6: E6_DIR_WRITE( INVERT_E6_DIR); break; case 7: E7_DIR_WRITE( INVERT_E7_DIR); break; \ + } }while(0) + + #elif E_STEPPERS > 6 + + #define _E_STEP_WRITE(E,V) do{ switch (E) { \ + case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); break; case 3: E3_STEP_WRITE(V); break; \ + case 4: E4_STEP_WRITE(V); break; case 5: E5_STEP_WRITE(V); break; case 6: E6_STEP_WRITE(V); break; \ + } }while(0) + #define _NORM_E_DIR(E) do{ switch (E) { \ + case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; \ + case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); break; \ + case 4: E4_DIR_WRITE(!INVERT_E4_DIR); break; case 5: E5_DIR_WRITE(!INVERT_E5_DIR); break; \ + case 6: E6_DIR_WRITE(!INVERT_E6_DIR); break; \ + } }while(0) + #define _REV_E_DIR(E) do{ switch (E) { \ + case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; \ + case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); break; \ + case 4: E4_DIR_WRITE( INVERT_E4_DIR); break; case 5: E5_DIR_WRITE( INVERT_E5_DIR); break; \ + case 6: E6_DIR_WRITE( INVERT_E6_DIR); break; \ + } }while(0) + + #elif E_STEPPERS > 5 + + #define _E_STEP_WRITE(E,V) do{ switch (E) { \ + case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); break; case 3: E3_STEP_WRITE(V); break; \ + case 4: E4_STEP_WRITE(V); break; case 5: E5_STEP_WRITE(V); break; \ + } }while(0) + #define _NORM_E_DIR(E) do{ switch (E) { \ + case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; \ + case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); break; \ + case 4: E4_DIR_WRITE(!INVERT_E4_DIR); break; case 5: E5_DIR_WRITE(!INVERT_E5_DIR); break; \ + } }while(0) + #define _REV_E_DIR(E) do{ switch (E) { \ + case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; \ + case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); break; \ + case 4: E4_DIR_WRITE( INVERT_E4_DIR); break; case 5: E5_DIR_WRITE( INVERT_E5_DIR); break; \ + } }while(0) + #elif E_STEPPERS > 4 - #define _E_STEP_WRITE(E,V) do{ switch (E) { case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); break; case 3: E3_STEP_WRITE(V); break; case 4: E4_STEP_WRITE(V); } }while(0) - #define _NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); break; case 4: E4_DIR_WRITE(!INVERT_E4_DIR); } }while(0) - #define _REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); break; case 4: E4_DIR_WRITE( INVERT_E4_DIR); } }while(0) + + #define _E_STEP_WRITE(E,V) do{ switch (E) { \ + case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); break; case 3: E3_STEP_WRITE(V); break; \ + case 4: E4_STEP_WRITE(V); break; \ + } }while(0) + #define _NORM_E_DIR(E) do{ switch (E) { \ + case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; \ + case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); break; \ + case 4: E4_DIR_WRITE(!INVERT_E4_DIR); break; \ + } }while(0) + #define _REV_E_DIR(E) do{ switch (E) { \ + case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; \ + case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); break; \ + case 4: E4_DIR_WRITE( INVERT_E4_DIR); break; \ + } }while(0) + #elif E_STEPPERS > 3 - #define _E_STEP_WRITE(E,V) do{ switch (E) { case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); break; case 3: E3_STEP_WRITE(V); } }while(0) - #define _NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); } }while(0) - #define _REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); } }while(0) + + #define _E_STEP_WRITE(E,V) do{ switch (E) { \ + case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); break; case 3: E3_STEP_WRITE(V); break; \ + } }while(0) + #define _NORM_E_DIR(E) do{ switch (E) { \ + case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; \ + case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); break; \ + } }while(0) + #define _REV_E_DIR(E) do{ switch (E) { \ + case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; \ + case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); break; \ + } }while(0) + #elif E_STEPPERS > 2 + #define _E_STEP_WRITE(E,V) do{ switch (E) { case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); } }while(0) #define _NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); } }while(0) #define _REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); } }while(0) + #else + #define _E_STEP_WRITE(E,V) do{ if (E == 0) { E0_STEP_WRITE(V); } else { E1_STEP_WRITE(V); } }while(0) #define _NORM_E_DIR(E) do{ if (E == 0) { E0_DIR_WRITE(!INVERT_E0_DIR); } else { E1_DIR_WRITE(!INVERT_E1_DIR); } }while(0) #define _REV_E_DIR(E) do{ if (E == 0) { E0_DIR_WRITE( INVERT_E0_DIR); } else { E1_DIR_WRITE( INVERT_E1_DIR); } }while(0) @@ -376,7 +542,15 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset #define E_STEP_WRITE(E,V) do{ if (extruder_duplication_enabled) { DUPE(STEP,V); } else _E_STEP_WRITE(E,V); }while(0) #if E_STEPPERS > 2 - #if E_STEPPERS > 5 + #if E_STEPPERS > 7 + #define DUPE(T,V) do{ _DUPE(0,T,V); _DUPE(1,T,V); _DUPE(2,T,V); _DUPE(3,T,V); _DUPE(4,T,V); _DUPE(5,T,V); _DUPE(6,T,V); _DUPE(7,T,V); }while(0) + #define NORM_E_DIR(E) do{ if (extruder_duplication_enabled) { NDIR(0); NDIR(1); NDIR(2); NDIR(3); NDIR(4); NDIR(5); NDIR(6); NDIR(7); } else _NORM_E_DIR(E); }while(0) + #define REV_E_DIR(E) do{ if (extruder_duplication_enabled) { RDIR(0); RDIR(1); RDIR(2); RDIR(3); RDIR(4); RDIR(5); RDIR(6); RDIR(7); } else _REV_E_DIR(E); }while(0) + #elif E_STEPPERS > 6 + #define DUPE(T,V) do{ _DUPE(0,T,V); _DUPE(1,T,V); _DUPE(2,T,V); _DUPE(3,T,V); _DUPE(4,T,V); _DUPE(5,T,V); _DUPE(6,T,V); }while(0) + #define NORM_E_DIR(E) do{ if (extruder_duplication_enabled) { NDIR(0); NDIR(1); NDIR(2); NDIR(3); NDIR(4); NDIR(5); NDIR(6); } else _NORM_E_DIR(E); }while(0) + #define REV_E_DIR(E) do{ if (extruder_duplication_enabled) { RDIR(0); RDIR(1); RDIR(2); RDIR(3); RDIR(4); RDIR(5); RDIR(6); } else _REV_E_DIR(E); }while(0) + #elif E_STEPPERS > 5 #define DUPE(T,V) do{ _DUPE(0,T,V); _DUPE(1,T,V); _DUPE(2,T,V); _DUPE(3,T,V); _DUPE(4,T,V); _DUPE(5,T,V); }while(0) #define NORM_E_DIR(E) do{ if (extruder_duplication_enabled) { NDIR(0); NDIR(1); NDIR(2); NDIR(3); NDIR(4); NDIR(5); } else _NORM_E_DIR(E); }while(0) #define REV_E_DIR(E) do{ if (extruder_duplication_enabled) { RDIR(0); RDIR(1); RDIR(2); RDIR(3); RDIR(4); RDIR(5); } else _REV_E_DIR(E); }while(0) @@ -604,12 +778,42 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset #define E5_disable() NOOP #endif +#if AXIS_DRIVER_TYPE_E6(L6470) + extern L6470 stepperE6; + #define E6_enable() NOOP + #define E6_disable() do{ stepperE6.free(); CBI(axis_known_position, E_AXIS); }while(0) +#elif E_STEPPERS > 6 && HAS_E6_ENABLE + #define E6_enable() E6_ENABLE_WRITE( E_ENABLE_ON) + #define E6_disable() E6_ENABLE_WRITE(!E_ENABLE_ON) +#else + #define E6_enable() NOOP + #define E6_disable() NOOP +#endif + +#if AXIS_DRIVER_TYPE_E7(L6470) + extern L6470 stepperE7; + #define E7_enable() NOOP + #define E7_disable() do{ stepperE7.free(); CBI(axis_known_position, E_AXIS); }while(0) +#elif E_STEPPERS > 7 && HAS_E7_ENABLE + #define E7_enable() E7_ENABLE_WRITE( E_ENABLE_ON) + #define E7_disable() E7_ENABLE_WRITE(!E_ENABLE_ON) +#else + #define E7_enable() NOOP + #define E7_disable() NOOP +#endif + #if ENABLED(MIXING_EXTRUDER) /** * Mixing steppers synchronize their enable (and direction) together */ - #if MIXING_STEPPERS > 5 + #if MIXING_STEPPERS > 7 + #define enable_E0() { E0_enable(); E1_enable(); E2_enable(); E3_enable(); E4_enable(); E5_enable(); E6_enable(); E7_enable(); } + #define disable_E0() { E0_disable(); E1_disable(); E2_disable(); E3_disable(); E4_disable(); E5_disable(); E6_disable(); E7_disable(); } + #elif MIXING_STEPPERS > 6 + #define enable_E0() { E0_enable(); E1_enable(); E2_enable(); E3_enable(); E4_enable(); E5_enable(); E6_enable(); } + #define disable_E0() { E0_disable(); E1_disable(); E2_disable(); E3_disable(); E4_disable(); E5_disable(); E6_disable(); } + #elif MIXING_STEPPERS > 5 #define enable_E0() { E0_enable(); E1_enable(); E2_enable(); E3_enable(); E4_enable(); E5_enable(); } #define disable_E0() { E0_disable(); E1_disable(); E2_disable(); E3_disable(); E4_disable(); E5_disable(); } #elif MIXING_STEPPERS > 4 @@ -635,6 +839,10 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset #define disable_E4() NOOP #define enable_E5() NOOP #define disable_E5() NOOP + #define enable_E6() NOOP + #define disable_E6() NOOP + #define enable_E7() NOOP + #define disable_E7() NOOP #else // !MIXING_EXTRUDER @@ -686,4 +894,20 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset #define disable_E5() NOOP #endif + #if E_STEPPERS > 6 && HAS_E6_ENABLE + #define enable_E6() E6_enable() + #define disable_E6() E6_disable() + #else + #define enable_E6() NOOP + #define disable_E6() NOOP + #endif + + #if E_STEPPERS > 7 && HAS_E7_ENABLE + #define enable_E7() E7_enable() + #define disable_E7() E7_disable() + #else + #define enable_E7() NOOP + #define disable_E7() NOOP + #endif + #endif // !MIXING_EXTRUDER diff --git a/Marlin/src/module/stepper/trinamic.cpp b/Marlin/src/module/stepper/trinamic.cpp index bdb6f20377..ba65c32eb6 100644 --- a/Marlin/src/module/stepper/trinamic.cpp +++ b/Marlin/src/module/stepper/trinamic.cpp @@ -301,6 +301,20 @@ enum StealthIndex : uint8_t { STEALTH_AXIS_XY, STEALTH_AXIS_Z, STEALTH_AXIS_E }; TMC_UART_DEFINE_E(SW, 5); #endif #endif + #if AXIS_HAS_UART(E6) + #ifdef E6_HARDWARE_SERIAL + TMC_UART_DEFINE_E(HW, 6); + #else + TMC_UART_DEFINE_E(SW, 6); + #endif + #endif + #if AXIS_HAS_UART(E7) + #ifdef E7_HARDWARE_SERIAL + TMC_UART_DEFINE_E(HW, 7); + #else + TMC_UART_DEFINE_E(SW, 7); + #endif + #endif void tmc_serial_begin() { #if AXIS_HAS_UART(X) @@ -401,6 +415,20 @@ enum StealthIndex : uint8_t { STEALTH_AXIS_XY, STEALTH_AXIS_Z, STEALTH_AXIS_E }; stepperE5.beginSerial(TMC_BAUD_RATE); #endif #endif + #if AXIS_HAS_UART(E6) + #ifdef E6_HARDWARE_SERIAL + E6_HARDWARE_SERIAL.begin(TMC_BAUD_RATE); + #else + stepperE6.beginSerial(TMC_BAUD_RATE); + #endif + #endif + #if AXIS_HAS_UART(E7) + #ifdef E7_HARDWARE_SERIAL + E7_HARDWARE_SERIAL.begin(TMC_BAUD_RATE); + #else + stepperE7.beginSerial(TMC_BAUD_RATE); + #endif + #endif } #endif @@ -654,6 +682,12 @@ void restore_trinamic_drivers() { #if AXIS_IS_TMC(E5) stepperE5.push(); #endif + #if AXIS_IS_TMC(E6) + stepperE6.push(); + #endif + #if AXIS_IS_TMC(E7) + stepperE7.push(); + #endif } void reset_trinamic_drivers() { @@ -719,6 +753,12 @@ void reset_trinamic_drivers() { #if AXIS_IS_TMC(E5) _TMC_INIT(E5, STEALTH_AXIS_E); #endif + #if AXIS_IS_TMC(E6) + _TMC_INIT(E6, STEALTH_AXIS_E); + #endif + #if AXIS_IS_TMC(E7) + _TMC_INIT(E7, STEALTH_AXIS_E); + #endif #if USE_SENSORLESS #if X_SENSORLESS diff --git a/Marlin/src/module/stepper/trinamic.h b/Marlin/src/module/stepper/trinamic.h index df4675d817..afa8847108 100644 --- a/Marlin/src/module/stepper/trinamic.h +++ b/Marlin/src/module/stepper/trinamic.h @@ -58,6 +58,8 @@ #define TMC_E3_LABEL 'E', '3' #define TMC_E4_LABEL 'E', '4' #define TMC_E5_LABEL 'E', '5' +#define TMC_E6_LABEL 'E', '6' +#define TMC_E7_LABEL 'E', '7' #define __TMC_CLASS(TYPE, L, I, A) TMCMarlin #define _TMC_CLASS(TYPE, LandI, A) __TMC_CLASS(TYPE, LandI, A) @@ -266,3 +268,29 @@ void reset_trinamic_drivers(); #define E5_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(E5_STEP_PIN); }while(0) #endif #endif + +// E6 Stepper +#if AXIS_IS_TMC(E6) + extern TMC_CLASS_E(6) stepperE6; + #if ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E6) + #define E6_ENABLE_INIT() NOOP + #define E6_ENABLE_WRITE(STATE) stepperE6.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0) + #define E6_ENABLE_READ() stepperE6.isEnabled() + #endif + #if AXIS_HAS_SQUARE_WAVE(E6) + #define E6_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(E6_STEP_PIN); }while(0) + #endif +#endif + +// E7 Stepper +#if AXIS_IS_TMC(E7) + extern TMC_CLASS_E(7) stepperE7; + #if ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E7) + #define E7_ENABLE_INIT() NOOP + #define E7_ENABLE_WRITE(STATE) stepperE7.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0) + #define E7_ENABLE_READ() stepperE7.isEnabled() + #endif + #if AXIS_HAS_SQUARE_WAVE(E7) + #define E7_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(E7_STEP_PIN); }while(0) + #endif +#endif diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp index b0b57873ce..eba7afd81a 100644 --- a/Marlin/src/module/temperature.cpp +++ b/Marlin/src/module/temperature.cpp @@ -303,9 +303,11 @@ volatile bool Temperature::temp_meas_ready = false; sensor_heater_2 { HEATER_2_RAW_LO_TEMP, HEATER_2_RAW_HI_TEMP, 0, 16383 }, sensor_heater_3 { HEATER_3_RAW_LO_TEMP, HEATER_3_RAW_HI_TEMP, 0, 16383 }, sensor_heater_4 { HEATER_4_RAW_LO_TEMP, HEATER_4_RAW_HI_TEMP, 0, 16383 }, - sensor_heater_5 { HEATER_5_RAW_LO_TEMP, HEATER_5_RAW_HI_TEMP, 0, 16383 }; + sensor_heater_5 { HEATER_5_RAW_LO_TEMP, HEATER_5_RAW_HI_TEMP, 0, 16383 }, + sensor_heater_6 { HEATER_6_RAW_LO_TEMP, HEATER_6_RAW_HI_TEMP, 0, 16383 }, + sensor_heater_7 { HEATER_7_RAW_LO_TEMP, HEATER_7_RAW_HI_TEMP, 0, 16383 }; - temp_range_t Temperature::temp_range[HOTENDS] = ARRAY_BY_HOTENDS(sensor_heater_0, sensor_heater_1, sensor_heater_2, sensor_heater_3, sensor_heater_4, sensor_heater_5); + temp_range_t Temperature::temp_range[HOTENDS] = ARRAY_BY_HOTENDS(sensor_heater_0, sensor_heater_1, sensor_heater_2, sensor_heater_3, sensor_heater_4, sensor_heater_5, sensor_heater_6, sensor_heater_7); #endif #ifdef MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED @@ -686,6 +688,12 @@ int16_t Temperature::getHeaterPower(const heater_ind_t heater_id) { , REPEAT2(4,_EFAN,4) 4 #if HOTENDS > 5 , REPEAT2(5,_EFAN,5) 5 + #if HOTENDS > 6 + , REPEAT2(6,_EFAN,6) 6 + #if HOTENDS > 7 + , REPEAT2(7,_EFAN,7) 7 + #endif + #endif #endif #endif #endif @@ -751,6 +759,12 @@ int16_t Temperature::getHeaterPower(const heater_ind_t heater_id) { #if HAS_AUTO_FAN_5 case 5: _UPDATE_AUTO_FAN(E5, fan_on, EXTRUDER_AUTO_FAN_SPEED); break; #endif + #if HAS_AUTO_FAN_6 + case 6: _UPDATE_AUTO_FAN(E6, fan_on, EXTRUDER_AUTO_FAN_SPEED); break; + #endif + #if HAS_AUTO_FAN_7 + case 7: _UPDATE_AUTO_FAN(E7, fan_on, EXTRUDER_AUTO_FAN_SPEED); break; + #endif #if HAS_AUTO_CHAMBER_FAN && !AUTO_CHAMBER_IS_E case CHAMBER_FAN_INDEX: _UPDATE_AUTO_FAN(CHAMBER, fan_on, CHAMBER_AUTO_FAN_SPEED); break; #endif @@ -893,7 +907,6 @@ void Temperature::min_temp_error(const heater_ind_t heater) { pid_output += work_pid[ee].Kc; } #endif // PID_EXTRUSION_SCALING - #if ENABLED(PID_FAN_SCALING) if (thermalManager.fan_speed[active_extruder] > PID_FAN_SCALING_MIN_SPEED) { work_pid[ee].Kf = PID_PARAM(Kf, ee) + (PID_FAN_SCALING_LIN_FACTOR) * thermalManager.fan_speed[active_extruder]; @@ -902,7 +915,6 @@ void Temperature::min_temp_error(const heater_ind_t heater) { //pid_output -= work_pid[ee].Ki; //pid_output += work_pid[ee].Ki * work_pid[ee].Kf #endif // PID_FAN_SCALING - LIMIT(pid_output, 0, PID_MAX); } temp_dState[ee] = temp_hotend[ee].celsius; @@ -1286,6 +1298,12 @@ void Temperature::manage_heater() { #if ENABLED(HEATER_5_USER_THERMISTOR) { true, 0, 0, HOTEND5_PULLUP_RESISTOR_OHMS, HOTEND5_RESISTANCE_25C_OHMS, 0, 0, HOTEND5_BETA, 0 }, #endif + #if ENABLED(HEATER_6_USER_THERMISTOR) + { true, 0, 0, HOTEND6_PULLUP_RESISTOR_OHMS, HOTEND6_RESISTANCE_25C_OHMS, 0, 0, HOTEND6_BETA, 0 }, + #endif + #if ENABLED(HEATER_7_USER_THERMISTOR) + { true, 0, 0, HOTEND7_PULLUP_RESISTOR_OHMS, HOTEND7_RESISTANCE_25C_OHMS, 0, 0, HOTEND7_BETA, 0 }, + #endif #if ENABLED(HEATER_BED_USER_THERMISTOR) { true, 0, 0, BED_PULLUP_RESISTOR_OHMS, BED_RESISTANCE_25C_OHMS, 0, 0, BED_BETA, 0 }, #endif @@ -1331,6 +1349,12 @@ void Temperature::manage_heater() { #if ENABLED(HEATER_5_USER_THERMISTOR) t_index == CTI_HOTEND_5 ? PSTR("HOTEND 5") : #endif + #if ENABLED(HEATER_6_USER_THERMISTOR) + t_index == CTI_HOTEND_6 ? PSTR("HOTEND 6") : + #endif + #if ENABLED(HEATER_7_USER_THERMISTOR) + t_index == CTI_HOTEND_7 ? PSTR("HOTEND 7") : + #endif #if ENABLED(HEATER_BED_USER_THERMISTOR) t_index == CTI_BED ? PSTR("BED") : #endif @@ -1476,6 +1500,26 @@ void Temperature::manage_heater() { #else break; #endif + case 6: + #if ENABLED(HEATER_6_USER_THERMISTOR) + return user_thermistor_to_deg_c(CTI_HOTEND_6, raw); + #elif ENABLED(HEATER_6_USES_AD595) + return TEMP_AD595(raw); + #elif ENABLED(HEATER_6_USES_AD8495) + return TEMP_AD8495(raw); + #else + break; + #endif + case 7: + #if ENABLED(HEATER_7_USER_THERMISTOR) + return user_thermistor_to_deg_c(CTI_HOTEND_7, raw); + #elif ENABLED(HEATER_7_USES_AD595) + return TEMP_AD595(raw); + #elif ENABLED(HEATER_7_USES_AD8495) + return TEMP_AD8495(raw); + #else + break; + #endif default: break; } @@ -1633,8 +1677,9 @@ void Temperature::init() { #endif #if MB(RUMBA) - #define _AD(N) (ANY(HEATER_##N##_USES_AD595, HEATER_##N##_USES_AD8495)) - #if _AD(0) || _AD(1) || _AD(2) || _AD(3) || _AD(4) || _AD(5) || _AD(BED) || _AD(CHAMBER) + #define _AD(N) ANY(HEATER_##N##_USES_AD595, HEATER_##N##_USES_AD8495) + #if _AD(0) || _AD(1) || _AD(2) /* RUMBA has 3 E plugs // || _AD(3) || _AD(4) || _AD(5) || _AD(6) || _AD(7) */ \ + || _AD(BED) || _AD(CHAMBER) // Disable RUMBA JTAG in case the thermocouple extension is plugged on top of JTAG connector MCUCR = _BV(JTD); MCUCR = _BV(JTD); @@ -1668,6 +1713,12 @@ void Temperature::init() { #if HAS_HEATER_5 OUT_WRITE(HEATER_5_PIN, HEATER_5_INVERTING); #endif + #if HAS_HEATER_6 + OUT_WRITE(HEATER_6_PIN, HEATER_6_INVERTING); + #endif + #if HAS_HEATER_7 + OUT_WRITE(HEATER_7_PIN, HEATER_7_INVERTING); + #endif #if HAS_HEATED_BED #ifdef ALFAWISE_UX0 @@ -1690,6 +1741,21 @@ void Temperature::init() { #if HAS_FAN2 INIT_FAN_PIN(FAN2_PIN); #endif + #if HAS_FAN3 + INIT_FAN_PIN(FAN3_PIN); + #endif + #if HAS_FAN4 + INIT_FAN_PIN(FAN4_PIN); + #endif + #if HAS_FAN5 + INIT_FAN_PIN(FAN5_PIN); + #endif + #if HAS_FAN6 + INIT_FAN_PIN(FAN6_PIN); + #endif + #if HAS_FAN7 + INIT_FAN_PIN(FAN7_PIN); + #endif #if ENABLED(USE_CONTROLLER_FAN) INIT_FAN_PIN(CONTROLLER_FAN_PIN); #endif @@ -1731,6 +1797,12 @@ void Temperature::init() { #if HAS_TEMP_ADC_5 HAL_ANALOG_SELECT(TEMP_5_PIN); #endif + #if HAS_TEMP_ADC_6 + HAL_ANALOG_SELECT(TEMP_6_PIN); + #endif + #if HAS_TEMP_ADC_7 + HAL_ANALOG_SELECT(TEMP_7_PIN); + #endif #if HAS_JOY_ADC_X HAL_ANALOG_SELECT(JOY_X_PIN); #endif @@ -1780,6 +1852,12 @@ void Temperature::init() { #if HAS_AUTO_FAN_5 && !(_EFANOVERLAP(5,0) || _EFANOVERLAP(5,1) || _EFANOVERLAP(5,2) || _EFANOVERLAP(5,3) || _EFANOVERLAP(5,4)) INIT_E_AUTO_FAN_PIN(E5_AUTO_FAN_PIN); #endif + #if HAS_AUTO_FAN_6 && !(_EFANOVERLAP(6,0) || _EFANOVERLAP(6,1) || _EFANOVERLAP(6,2) || _EFANOVERLAP(6,3) || _EFANOVERLAP(6,4) || _EFANOVERLAP(6,5)) + INIT_E_AUTO_FAN_PIN(E6_AUTO_FAN_PIN); + #endif + #if HAS_AUTO_FAN_7 && !(_EFANOVERLAP(7,0) || _EFANOVERLAP(7,1) || _EFANOVERLAP(7,2) || _EFANOVERLAP(7,3) || _EFANOVERLAP(7,4) || _EFANOVERLAP(7,5) || _EFANOVERLAP(7,6)) + INIT_E_AUTO_FAN_PIN(E7_AUTO_FAN_PIN); + #endif #if HAS_AUTO_CHAMBER_FAN && !AUTO_CHAMBER_IS_E INIT_CHAMBER_AUTO_FAN_PIN(CHAMBER_AUTO_FAN_PIN); #endif @@ -1841,6 +1919,22 @@ void Temperature::init() { #ifdef HEATER_5_MAXTEMP _TEMP_MAX_E(5); #endif + #if HOTENDS > 6 + #ifdef HEATER_6_MINTEMP + _TEMP_MIN_E(6); + #endif + #ifdef HEATER_6_MAXTEMP + _TEMP_MAX_E(6); + #endif + #if HOTENDS > 7 + #ifdef HEATER_7_MINTEMP + _TEMP_MIN_E(7); + #endif + #ifdef HEATER_7_MAXTEMP + _TEMP_MAX_E(7); + #endif + #endif // HOTENDS > 7 + #endif // HOTENDS > 6 #endif // HOTENDS > 5 #endif // HOTENDS > 4 #endif // HOTENDS > 3 @@ -2232,6 +2326,12 @@ void Temperature::set_current_temp_raw() { temp_hotend[4].update(); #if HAS_TEMP_ADC_5 temp_hotend[5].update(); + #if HAS_TEMP_ADC_6 + temp_hotend[6].update(); + #if HAS_TEMP_ADC_7 + temp_hotend[7].update(); + #endif // HAS_TEMP_ADC_7 + #endif // HAS_TEMP_ADC_6 #endif // HAS_TEMP_ADC_5 #endif // HAS_TEMP_ADC_4 #endif // HAS_TEMP_ADC_3 @@ -2508,6 +2608,21 @@ void Temperature::tick() { #if HAS_FAN2 _FAN_PWM(2); #endif + #if HAS_FAN3 + _FAN_PWM(3); + #endif + #if HAS_FAN4 + _FAN_PWM(4); + #endif + #if HAS_FAN5 + _FAN_PWM(5); + #endif + #if HAS_FAN6 + _FAN_PWM(6); + #endif + #if HAS_FAN7 + _FAN_PWM(7); + #endif #endif } else { @@ -2535,6 +2650,21 @@ void Temperature::tick() { #if HAS_FAN2 if (soft_pwm_count_fan[2] <= pwm_count_tmp) WRITE_FAN(2, LOW); #endif + #if HAS_FAN3 + if (soft_pwm_count_fan[3] <= pwm_count_tmp) WRITE_FAN(3, LOW); + #endif + #if HAS_FAN4 + if (soft_pwm_count_fan[4] <= pwm_count_tmp) WRITE_FAN(4, LOW); + #endif + #if HAS_FAN5 + if (soft_pwm_count_fan[5] <= pwm_count_tmp) WRITE_FAN(5, LOW); + #endif + #if HAS_FAN6 + if (soft_pwm_count_fan[6] <= pwm_count_tmp) WRITE_FAN(6, LOW); + #endif + #if HAS_FAN7 + if (soft_pwm_count_fan[7] <= pwm_count_tmp) WRITE_FAN(7, LOW); + #endif #endif } @@ -2599,6 +2729,21 @@ void Temperature::tick() { #if HAS_FAN2 _PWM_FAN(2); #endif + #if HAS_FAN3 + _FAN_PWM(3); + #endif + #if HAS_FAN4 + _FAN_PWM(4); + #endif + #if HAS_FAN5 + _FAN_PWM(5); + #endif + #if HAS_FAN6 + _FAN_PWM(6); + #endif + #if HAS_FAN7 + _FAN_PWM(7); + #endif } #if HAS_FAN0 if (soft_pwm_count_fan[0] <= pwm_count_tmp) WRITE_FAN(0, LOW); @@ -2609,6 +2754,21 @@ void Temperature::tick() { #if HAS_FAN2 if (soft_pwm_count_fan[2] <= pwm_count_tmp) WRITE_FAN(2, LOW); #endif + #if HAS_FAN3 + if (soft_pwm_count_fan[3] <= pwm_count_tmp) WRITE_FAN(3, LOW); + #endif + #if HAS_FAN4 + if (soft_pwm_count_fan[4] <= pwm_count_tmp) WRITE_FAN(4, LOW); + #endif + #if HAS_FAN5 + if (soft_pwm_count_fan[5] <= pwm_count_tmp) WRITE_FAN(5, LOW); + #endif + #if HAS_FAN6 + if (soft_pwm_count_fan[6] <= pwm_count_tmp) WRITE_FAN(6, LOW); + #endif + #if HAS_FAN7 + if (soft_pwm_count_fan[7] <= pwm_count_tmp) WRITE_FAN(7, LOW); + #endif #endif // FAN_SOFT_PWM // SOFT_PWM_SCALE to frequency: @@ -2730,6 +2890,16 @@ void Temperature::tick() { case MeasureTemp_5: ACCUMULATE_ADC(temp_hotend[5]); break; #endif + #if HAS_TEMP_ADC_6 + case PrepareTemp_6: HAL_START_ADC(TEMP_6_PIN); break; + case MeasureTemp_6: ACCUMULATE_ADC(temp_hotend[6]); break; + #endif + + #if HAS_TEMP_ADC_7 + case PrepareTemp_7: HAL_START_ADC(TEMP_7_PIN); break; + case MeasureTemp_7: ACCUMULATE_ADC(temp_hotend[7]); break; + #endif + #if ENABLED(FILAMENT_WIDTH_SENSOR) case Prepare_FILWIDTH: HAL_START_ADC(FILWIDTH_PIN); break; case Measure_FILWIDTH: diff --git a/Marlin/src/module/temperature.h b/Marlin/src/module/temperature.h index 9c1860798c..5273104503 100644 --- a/Marlin/src/module/temperature.h +++ b/Marlin/src/module/temperature.h @@ -132,6 +132,12 @@ enum ADCSensorState : char { #if HAS_TEMP_ADC_5 PrepareTemp_5, MeasureTemp_5, #endif + #if HAS_TEMP_ADC_6 + PrepareTemp_6, MeasureTemp_6, + #endif + #if HAS_TEMP_ADC_7 + PrepareTemp_7, MeasureTemp_7, + #endif #if HAS_JOY_ADC_X PrepareJoy_X, MeasureJoy_X, #endif diff --git a/Marlin/src/module/thermistor/thermistors.h b/Marlin/src/module/thermistor/thermistors.h index 1e7b76d153..875f742ccb 100644 --- a/Marlin/src/module/thermistor/thermistors.h +++ b/Marlin/src/module/thermistor/thermistors.h @@ -39,7 +39,7 @@ #define OV(N) int16_t((N) * (OVERSAMPLENR) * (THERMISTOR_TABLE_SCALE)) -#define ANY_THERMISTOR_IS(n) (THERMISTOR_HEATER_0 == n || THERMISTOR_HEATER_1 == n || THERMISTOR_HEATER_2 == n || THERMISTOR_HEATER_3 == n || THERMISTOR_HEATER_4 == n || THERMISTOR_HEATER_5 == n || THERMISTORBED == n || THERMISTORCHAMBER == n || THERMISTORPROBE == n) +#define ANY_THERMISTOR_IS(n) (THERMISTOR_HEATER_0 == n || THERMISTOR_HEATER_1 == n || THERMISTOR_HEATER_2 == n || THERMISTOR_HEATER_3 == n || THERMISTOR_HEATER_4 == n || THERMISTOR_HEATER_5 == n || THERMISTOR_HEATER_6 == n || THERMISTOR_HEATER_7 == n || THERMISTORBED == n || THERMISTORCHAMBER == n || THERMISTORPROBE == n) // Pt1000 and Pt100 handling // @@ -235,6 +235,26 @@ #define HEATER_5_TEMPTABLE_LEN 0 #endif +#if THERMISTOR_HEATER_6 + #define HEATER_6_TEMPTABLE TT_NAME(THERMISTOR_HEATER_6) + #define HEATER_6_TEMPTABLE_LEN COUNT(HEATER_6_TEMPTABLE) +#elif defined(HEATER_6_USES_THERMISTOR) + #error "No heater 6 thermistor table specified" +#else + #define HEATER_6_TEMPTABLE nullptr + #define HEATER_6_TEMPTABLE_LEN 0 +#endif + +#if THERMISTOR_HEATER_7 + #define HEATER_7_TEMPTABLE TT_NAME(THERMISTOR_HEATER_7) + #define HEATER_7_TEMPTABLE_LEN COUNT(HEATER_7_TEMPTABLE) +#elif defined(HEATER_7_USES_THERMISTOR) + #error "No heater 7 thermistor table specified" +#else + #define HEATER_7_TEMPTABLE nullptr + #define HEATER_7_TEMPTABLE_LEN 0 +#endif + #ifdef THERMISTORBED #define BED_TEMPTABLE TT_NAME(THERMISTORBED) #define BED_TEMPTABLE_LEN COUNT(BED_TEMPTABLE) @@ -264,6 +284,7 @@ static_assert( HEATER_0_TEMPTABLE_LEN < 256 && HEATER_1_TEMPTABLE_LEN < 256 && HEATER_2_TEMPTABLE_LEN < 256 && HEATER_3_TEMPTABLE_LEN < 256 && HEATER_4_TEMPTABLE_LEN < 256 && HEATER_5_TEMPTABLE_LEN < 256 + && HEATER_6_TEMPTABLE_LEN < 258 && HEATER_7_TEMPTABLE_LEN < 258 && BED_TEMPTABLE_LEN < 256 && CHAMBER_TEMPTABLE_LEN < 256 && PROBE_TEMPTABLE_LEN < 256, "Temperature conversion tables over 255 entries need special consideration." @@ -326,6 +347,24 @@ static_assert( #define HEATER_5_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE #endif #endif +#ifndef HEATER_6_RAW_HI_TEMP + #if defined(REVERSE_TEMP_SENSOR_RANGE) || !defined(HEATER_6_USES_THERMISTOR) + #define HEATER_6_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE + #define HEATER_6_RAW_LO_TEMP 0 + #else + #define HEATER_6_RAW_HI_TEMP 0 + #define HEATER_6_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE + #endif +#endif +#ifndef HEATER_7_RAW_HI_TEMP + #if defined(REVERSE_TEMP_SENSOR_RANGE) || !defined(HEATER_7_USES_THERMISTOR) + #define HEATER_7_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE + #define HEATER_7_RAW_LO_TEMP 0 + #else + #define HEATER_7_RAW_HI_TEMP 0 + #define HEATER_7_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE + #endif +#endif #ifndef HEATER_BED_RAW_HI_TEMP #if defined(REVERSE_TEMP_SENSOR_RANGE) || !defined(HEATER_BED_USES_THERMISTOR) #define HEATER_BED_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index c29f0c363d..bd799e5e91 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -534,6 +534,8 @@ #include "stm32/pins_STEVAL_3DP001V1.h" // STM32F4 env:STM32F401VE_STEVAL #elif MB(BIGTREE_SKR_PRO_V1_1) #include "stm32/pins_BTT_SKR_PRO_V1_1.h" // STM32F4 env:BIGTREE_SKR_PRO +#elif MB(BIGTREE_GTR_V1_0) + #include "stm32/pins_BTT_GTR_V1_0.h" // STM32F4 env:BIGTREE_GTR #elif MB(BIGTREE_BTT002_V1_0) #include "stm32/pins_BTT_BTT002_V1_0.h" // STM32F4 env:BIGTREE_BTT002 #elif MB(LERDGE_K) @@ -713,6 +715,24 @@ #ifndef E5_MS3_PIN #define E5_MS3_PIN -1 #endif +#ifndef E6_MS1_PIN + #define E6_MS1_PIN -1 +#endif +#ifndef E6_MS2_PIN + #define E6_MS2_PIN -1 +#endif +#ifndef E6_MS3_PIN + #define E6_MS3_PIN -1 +#endif +#ifndef E7_MS1_PIN + #define E7_MS1_PIN -1 +#endif +#ifndef E7_MS2_PIN + #define E7_MS2_PIN -1 +#endif +#ifndef E7_MS3_PIN + #define E7_MS3_PIN -1 +#endif #ifndef E0_STEP_PIN #define E0_STEP_PIN -1 @@ -768,6 +788,24 @@ #ifndef E5_ENABLE_PIN #define E5_ENABLE_PIN -1 #endif +#ifndef E6_STEP_PIN + #define E6_STEP_PIN -1 +#endif +#ifndef E6_DIR_PIN + #define E6_DIR_PIN -1 +#endif +#ifndef E6_ENABLE_PIN + #define E6_ENABLE_PIN -1 +#endif +#ifndef E7_STEP_PIN + #define E7_STEP_PIN -1 +#endif +#ifndef E7_DIR_PIN + #define E7_DIR_PIN -1 +#endif +#ifndef E7_ENABLE_PIN + #define E7_ENABLE_PIN -1 +#endif #ifndef X_CS_PIN #define X_CS_PIN -1 @@ -796,6 +834,12 @@ #ifndef E5_CS_PIN #define E5_CS_PIN -1 #endif +#ifndef E6_CS_PIN + #define E6_CS_PIN -1 +#endif +#ifndef E7_CS_PIN + #define E7_CS_PIN -1 +#endif #ifndef FAN_PIN #define FAN_PIN -1 @@ -839,6 +883,12 @@ #ifndef HEATER_5_PIN #define HEATER_5_PIN -1 #endif +#ifndef HEATER_6_PIN + #define HEATER_6_PIN -1 +#endif +#ifndef HEATER_7_PIN + #define HEATER_7_PIN -1 +#endif #ifndef HEATER_BED_PIN #define HEATER_BED_PIN -1 #endif @@ -861,6 +911,12 @@ #ifndef TEMP_5_PIN #define TEMP_5_PIN -1 #endif +#ifndef TEMP_6_PIN + #define TEMP_6_PIN -1 +#endif +#ifndef TEMP_7_PIN + #define TEMP_7_PIN -1 +#endif #ifndef TEMP_BED_PIN #define TEMP_BED_PIN -1 #endif @@ -940,6 +996,20 @@ #define E5_AUTO_FAN_PIN -1 #endif #endif +#ifndef E6_AUTO_FAN_PIN + #ifdef ORIG_E6_AUTO_FAN_PIN + #define E6_AUTO_FAN_PIN ORIG_E6_AUTO_FAN_PIN + #else + #define E6_AUTO_FAN_PIN -1 + #endif +#endif +#ifndef E7_AUTO_FAN_PIN + #ifdef ORIG_E7_AUTO_FAN_PIN + #define E7_AUTO_FAN_PIN ORIG_E7_AUTO_FAN_PIN + #else + #define E7_AUTO_FAN_PIN -1 + #endif +#endif #ifndef CHAMBER_AUTO_FAN_PIN #ifdef ORIG_CHAMBER_AUTO_FAN_PIN #define CHAMBER_AUTO_FAN_PIN ORIG_CHAMBER_AUTO_FAN_PIN diff --git a/Marlin/src/pins/pinsDebug_list.h b/Marlin/src/pins/pinsDebug_list.h index 771ca3da09..ca8c3f9a99 100644 --- a/Marlin/src/pins/pinsDebug_list.h +++ b/Marlin/src/pins/pinsDebug_list.h @@ -153,6 +153,24 @@ #if !PIN_EXISTS(E5_MS3) #undef E5_MS3_PIN #endif +#if !PIN_EXISTS(E6_MS1) + #undef E6_MS1_PIN +#endif +#if !PIN_EXISTS(E6_MS2) + #undef E6_MS2_PIN +#endif +#if !PIN_EXISTS(E6_MS3) + #undef E6_MS3_PIN +#endif +#if !PIN_EXISTS(E7_MS1) + #undef E7_MS1_PIN +#endif +#if !PIN_EXISTS(E7_MS2) + #undef E7_MS2_PIN +#endif +#if !PIN_EXISTS(E7_MS3) + #undef E7_MS3_PIN +#endif #if !PIN_EXISTS(E0_STEP) #undef E0_STEP_PIN @@ -208,6 +226,24 @@ #if !PIN_EXISTS(E5_ENABLE) #undef E5_ENABLE_PIN #endif +#if !PIN_EXISTS(E6_STEP) + #undef E6_STEP_PIN +#endif +#if !PIN_EXISTS(E6_DIR) + #undef E6_DIR_PIN +#endif +#if !PIN_EXISTS(E6_ENABLE) + #undef E6_ENABLE_PIN +#endif +#if !PIN_EXISTS(E7_STEP) + #undef E7_STEP_PIN +#endif +#if !PIN_EXISTS(E7_DIR) + #undef E7_DIR_PIN +#endif +#if !PIN_EXISTS(E7_ENABLE) + #undef E7_ENABLE_PIN +#endif #if !PIN_EXISTS(X_CS) #undef X_CS_PIN @@ -236,6 +272,12 @@ #if !PIN_EXISTS(E5_CS) #undef E5_CS_PIN #endif +#if !PIN_EXISTS(E6_CS) + #undef E6_CS_PIN +#endif +#if !PIN_EXISTS(E7_CS) + #undef E7_CS_PIN +#endif #if !PIN_EXISTS(FAN) #undef FAN_PIN @@ -247,6 +289,21 @@ #if !PIN_EXISTS(FAN2) #undef FAN2_PIN #endif +#if !PIN_EXISTS(FAN3) + #undef FAN3_PIN +#endif +#if !PIN_EXISTS(FAN4) + #undef FAN4_PIN +#endif +#if !PIN_EXISTS(FAN5) + #undef FAN5_PIN +#endif +#if !PIN_EXISTS(FAN6) + #undef FAN6_PIN +#endif +#if !PIN_EXISTS(FAN7) + #undef FAN7_PIN +#endif #if !PIN_EXISTS(CONTROLLER_FAN) #undef CONTROLLER_FAN_PIN #endif @@ -279,6 +336,12 @@ #if !PIN_EXISTS(HEATER_5) #undef HEATER_5_PIN #endif +#if !PIN_EXISTS(HEATER_6) + #undef HEATER_6_PIN +#endif +#if !PIN_EXISTS(HEATER_7) + #undef HEATER_7_PIN +#endif #if !PIN_EXISTS(HEATER_BED) #undef HEATER_BED_PIN #endif @@ -301,6 +364,12 @@ #if !PIN_EXISTS(TEMP_5) #undef TEMP_5_PIN #endif +#if !PIN_EXISTS(TEMP_6) + #undef TEMP_6_PIN +#endif +#if !PIN_EXISTS(TEMP_7) + #undef TEMP_7_PIN +#endif #if !PIN_EXISTS(TEMP_BED) #undef TEMP_BED_PIN #endif @@ -363,6 +432,12 @@ #if PIN_EXISTS(TEMP_5) && TEMP_5_PIN < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, TEMP_5_PIN) #endif +#if PIN_EXISTS(TEMP_6) && TEMP_6_PIN < NUM_ANALOG_INPUTS + REPORT_NAME_ANALOG(__LINE__, TEMP_6_PIN) +#endif +#if PIN_EXISTS(TEMP_7) && TEMP_7_PIN < NUM_ANALOG_INPUTS + REPORT_NAME_ANALOG(__LINE__, TEMP_7_PIN) +#endif #if PIN_EXISTS(TEMP_BED) && TEMP_BED_PIN < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, TEMP_BED_PIN) #endif @@ -686,6 +761,54 @@ #if PIN_EXISTS(E5_STEP) REPORT_NAME_DIGITAL(__LINE__, E5_STEP_PIN) #endif +#if PIN_EXISTS(E6_AUTO_FAN) + REPORT_NAME_DIGITAL(__LINE__, E6_AUTO_FAN_PIN) +#endif +#if PIN_EXISTS(E6_CS) + REPORT_NAME_DIGITAL(__LINE__, E6_CS_PIN) +#endif +#if PIN_EXISTS(E6_DIR) + REPORT_NAME_DIGITAL(__LINE__, E6_DIR_PIN) +#endif +#if PIN_EXISTS(E6_ENABLE) + REPORT_NAME_DIGITAL(__LINE__, E6_ENABLE_PIN) +#endif +#if PIN_EXISTS(E6_MS1) + REPORT_NAME_DIGITAL(__LINE__, E6_MS1_PIN) +#endif +#if PIN_EXISTS(E6_MS2) + REPORT_NAME_DIGITAL(__LINE__, E6_MS2_PIN) +#endif +#if PIN_EXISTS(E6_MS3) + REPORT_NAME_DIGITAL(__LINE__, E6_MS3_PIN) +#endif +#if PIN_EXISTS(E6_STEP) + REPORT_NAME_DIGITAL(__LINE__, E6_STEP_PIN) +#endif +#if PIN_EXISTS(E7_AUTO_FAN) + REPORT_NAME_DIGITAL(__LINE__, E7_AUTO_FAN_PIN) +#endif +#if PIN_EXISTS(E7_CS) + REPORT_NAME_DIGITAL(__LINE__, E7_CS_PIN) +#endif +#if PIN_EXISTS(E7_DIR) + REPORT_NAME_DIGITAL(__LINE__, E7_DIR_PIN) +#endif +#if PIN_EXISTS(E7_ENABLE) + REPORT_NAME_DIGITAL(__LINE__, E7_ENABLE_PIN) +#endif +#if PIN_EXISTS(E7_MS1) + REPORT_NAME_DIGITAL(__LINE__, E7_MS1_PIN) +#endif +#if PIN_EXISTS(E7_MS2) + REPORT_NAME_DIGITAL(__LINE__, E7_MS2_PIN) +#endif +#if PIN_EXISTS(E7_MS3) + REPORT_NAME_DIGITAL(__LINE__, E7_MS3_PIN) +#endif +#if PIN_EXISTS(E7_STEP) + REPORT_NAME_DIGITAL(__LINE__, E7_STEP_PIN) +#endif #if defined(ENET_CRS) && ENET_CRS >= 0 REPORT_NAME_DIGITAL(__LINE__, ENET_CRS) #endif @@ -765,6 +888,18 @@ #if PIN_EXISTS(FAN3) REPORT_NAME_DIGITAL(__LINE__, FAN3_PIN) #endif +#if PIN_EXISTS(FAN4) + REPORT_NAME_DIGITAL(__LINE__, FAN4_PIN) +#endif +#if PIN_EXISTS(FAN5) + REPORT_NAME_DIGITAL(__LINE__, FAN5_PIN) +#endif +#if PIN_EXISTS(FAN6) + REPORT_NAME_DIGITAL(__LINE__, FAN6_PIN) +#endif +#if PIN_EXISTS(FAN7) + REPORT_NAME_DIGITAL(__LINE__, FAN7_PIN) +#endif #if PIN_EXISTS(FIL_RUNOUT) REPORT_NAME_DIGITAL(__LINE__, FIL_RUNOUT_PIN) #endif @@ -936,6 +1071,12 @@ #if PIN_EXISTS(ORIG_E5_AUTO_FAN) REPORT_NAME_DIGITAL(__LINE__, ORIG_E5_AUTO_FAN_PIN) #endif +#if PIN_EXISTS(ORIG_E6_AUTO_FAN) + REPORT_NAME_DIGITAL(__LINE__, ORIG_E6_AUTO_FAN_PIN) +#endif +#if PIN_EXISTS(ORIG_E7_AUTO_FAN) + REPORT_NAME_DIGITAL(__LINE__, ORIG_E7_AUTO_FAN_PIN) +#endif #if PIN_EXISTS(PHOTOGRAPH) REPORT_NAME_DIGITAL(__LINE__, PHOTOGRAPH_PIN) #endif @@ -1455,6 +1596,18 @@ #if PIN_EXISTS(E5_SERIAL_RX) REPORT_NAME_DIGITAL(__LINE__, E5_SERIAL_RX_PIN) #endif +#if PIN_EXISTS(E6_SERIAL_TX) + REPORT_NAME_DIGITAL(__LINE__, E6_SERIAL_TX_PIN) +#endif +#if PIN_EXISTS(E6_SERIAL_RX) + REPORT_NAME_DIGITAL(__LINE__, E6_SERIAL_RX_PIN) +#endif +#if PIN_EXISTS(E7_SERIAL_TX) + REPORT_NAME_DIGITAL(__LINE__, E7_SERIAL_TX_PIN) +#endif +#if PIN_EXISTS(E7_SERIAL_RX) + REPORT_NAME_DIGITAL(__LINE__, E7_SERIAL_RX_PIN) +#endif #if PIN_EXISTS(L6470_CHAIN_SCK) REPORT_NAME_DIGITAL(__LINE__, L6470_CHAIN_SCK_PIN) #endif diff --git a/Marlin/src/pins/sensitive_pins.h b/Marlin/src/pins/sensitive_pins.h index 24daf354bf..2492f31816 100644 --- a/Marlin/src/pins/sensitive_pins.h +++ b/Marlin/src/pins/sensitive_pins.h @@ -277,6 +277,54 @@ #endif #endif +#define _E6_CS +#define _E6_MS2 +#define _E6_MS3 +#define _E6_MS4 + +#if E_NEEDED(6) + #if PIN_EXISTS(E6_CS) && AXIS_HAS_SPI(E6) + #undef _E6_CS + #define _E6_CS E6_CS_PIN, + #endif + #if PIN_EXISTS(E6_MS2) + #undef _E6_MS2 + #define _E6_MS2 E6_MS2_PIN, + #endif + #if PIN_EXISTS(E6_MS3) + #undef _E6_MS3 + #define _E6_MS3 E6_MS3_PIN, + #endif + #if PIN_EXISTS(E6_MS4) + #undef _E6_MS4 + #define _E6_MS4 E6_MS4_PIN, + #endif +#endif + +#define _E7_CS +#define _E7_MS3 +#define _E7_MS4 +#define _E7_MS5 + +#if E_NEEDED(7) + #if PIN_EXISTS(E7_CS) && AXIS_HAS_SPI(E7) + #undef _E7_CS + #define _E7_CS E7_CS_PIN, + #endif + #if PIN_EXISTS(E7_MS3) + #undef _E7_MS3 + #define _E7_MS3 E7_MS3_PIN, + #endif + #if PIN_EXISTS(E7_MS4) + #undef _E7_MS4 + #define _E7_MS4 E7_MS4_PIN, + #endif + #if PIN_EXISTS(E7_MS5) + #undef _E7_MS5 + #define _E7_MS5 E7_MS5_PIN, + #endif +#endif + // // E Steppers // @@ -287,6 +335,8 @@ #define _E3_PINS #define _E4_PINS #define _E5_PINS +#define _E6_PINS +#define _E7_PINS #if EXTRUDERS #undef _E0_PINS @@ -303,7 +353,9 @@ #define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN, _E2_CS _E2_MS1 _E2_MS2 _E2_MS3 #endif #endif + #elif EXTRUDERS > 1 || ENABLED(MIXING_EXTRUDER) + #undef _E1_PINS #define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, _E1_CS _E1_MS1 _E1_MS2 _E1_MS3 #if EXTRUDERS > 2 || (ENABLED(MIXING_EXTRUDER) && MIXING_STEPPERS > 2) @@ -318,10 +370,19 @@ #if EXTRUDERS > 5 || (ENABLED(MIXING_EXTRUDER) && MIXING_STEPPERS > 5) #undef _E5_PINS #define _E5_PINS E5_STEP_PIN, E5_DIR_PIN, E5_ENABLE_PIN, _E5_CS _E5_MS1 _E5_MS2 _E5_MS3 + #if EXTRUDERS > 6 || (ENABLED(MIXING_EXTRUDER) && MIXING_STEPPERS > 6) + #undef _E6_PINS + #define _E6_PINS E6_STEP_PIN, E6_DIR_PIN, E6_ENABLE_PIN, _E6_CS _E6_MS1 _E6_MS2 _E6_MS3 + #if EXTRUDERS > 7 || (ENABLED(MIXING_EXTRUDER) && MIXING_STEPPERS > 7) + #undef _E7_PINS + #define _E7_PINS E7_STEP_PIN, E7_DIR_PIN, E7_ENABLE_PIN, _E7_CS _E7_MS1 _E7_MS2 _E7_MS3 + #endif // EXTRUDERS > 7 || MIXING_EXTRUDER > 7 + #endif // EXTRUDERS > 6 || MIXING_EXTRUDER > 6 #endif // EXTRUDERS > 5 || MIXING_EXTRUDER > 5 #endif // EXTRUDERS > 4 || MIXING_EXTRUDER > 4 #endif // EXTRUDERS > 3 || MIXING_EXTRUDER > 3 #endif // EXTRUDERS > 2 || MIXING_EXTRUDER > 2 + #endif // EXTRUDERS > 1 || MIXING_EXTRUDER // @@ -334,6 +395,8 @@ #define _H3_PINS #define _H4_PINS #define _H5_PINS +#define _H6_PINS +#define _H7_PINS #if HOTENDS #undef _H0_PINS @@ -353,6 +416,14 @@ #if HOTENDS > 5 #undef _H5_PINS #define _H5_PINS HEATER_5_PIN, E5_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_5_PIN), + #if HOTENDS > 6 + #undef _H6_PINS + #define _H6_PINS HEATER_6_PIN, E6_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_6_PIN), + #if HOTENDS > 7 + #undef _H7_PINS + #define _H7_PINS HEATER_7_PIN, E7_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_7_PIN), + #endif // HOTENDS > 7 + #endif // HOTENDS > 6 #endif // HOTENDS > 5 #endif // HOTENDS > 4 #endif // HOTENDS > 3 @@ -539,6 +610,31 @@ #else #define _FAN2 #endif +#if PIN_EXISTS(FAN3) + #define _FAN3 FAN3_PIN, +#else + #define _FAN3 +#endif +#if PIN_EXISTS(FAN4) + #define _FAN4 FAN4_PIN, +#else + #define _FAN4 +#endif +#if PIN_EXISTS(FAN5) + #define _FAN5 FAN5_PIN, +#else + #define _FAN5 +#endif +#if PIN_EXISTS(FAN6) + #define _FAN6 FAN6_PIN, +#else + #define _FAN6 +#endif +#if PIN_EXISTS(FAN7) + #define _FAN7 FAN7_PIN, +#else + #define _FAN7 +#endif #if PIN_EXISTS(CONTROLLER_FAN) #define _FANC CONTROLLER_FAN_PIN, #else @@ -550,9 +646,9 @@ #endif #define SENSITIVE_PINS { \ - _X_PINS _Y_PINS _Z_PINS _X2_PINS _Y2_PINS _Z2_PINS _Z3_PINS _Z4_PINS \ - _Z_PROBE _E0_PINS _E1_PINS _E2_PINS _E3_PINS _E4_PINS _E5_PINS \ - _BED_PINS _H0_PINS _H1_PINS _H2_PINS _H3_PINS _H4_PINS _H5_PINS \ - _PS_ON _HEATER_BED _FAN0 _FAN1 _FAN2 _FANC \ + _X_PINS _Y_PINS _Z_PINS _X2_PINS _Y2_PINS _Z2_PINS _Z3_PINS _Z4_PINS _Z_PROBE \ + _E0_PINS _E1_PINS _E2_PINS _E3_PINS _E4_PINS _E5_PINS _E6_PINS _E7_PINS _BED_PINS \ + _H0_PINS _H1_PINS _H2_PINS _H3_PINS _H4_PINS _H5_PINS _H6_PINS _H7_PINS \ + _PS_ON _HEATER_BED _FAN0 _FAN1 _FAN2 _FAN3 _FAN4 _FAN5 _FAN6 _FAN7 _FANC \ HAL_SENSITIVE_PINS \ } diff --git a/Marlin/src/pins/stm32/pins_BTT_GTR_V1_0.h b/Marlin/src/pins/stm32/pins_BTT_GTR_V1_0.h new file mode 100644 index 0000000000..8ed2e50d25 --- /dev/null +++ b/Marlin/src/pins/stm32/pins_BTT_GTR_V1_0.h @@ -0,0 +1,391 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#ifndef TARGET_STM32F4 + #error "Oops! Select an STM32F4 board in 'Tools > Board.'" +#elif HOTENDS > 8 || E_STEPPERS > 8 + #error "BIGTREE GTR V1.0 supports up to 8 hotends / E-steppers." +#elif HOTENDS > MAX_EXTRUDERS || E_STEPPERS > MAX_EXTRUDERS + #error "Marlin extruder/hotends limit! Increase MAX_EXTRUDERS to continue." +#endif + +#define BOARD_INFO_NAME "BIGTREE GTR 1.0" + +// Use one of these or SDCard-based Emulation will be used +//#define I2C_EEPROM +//#define SRAM_EEPROM_EMULATION // Use BackSRAM-based EEPROM emulation +//#define FLASH_EEPROM_EMULATION // Use Flash-based EEPROM emulation + +#define TP // Enable to define servo and probe pins + +// +// Servos +// +#if ENABLED(TP) + #define SERVO0_PIN PB11 +#endif + +#define PS_ON_PIN PH6 + +// +// Limit Switches +// +#define X_MIN_PIN PF2 +#define X_MAX_PIN PG14 +#define Y_MIN_PIN PC13 +#define Y_MAX_PIN PG9 +#define Z_MIN_PIN PE0 +#define Z_MAX_PIN PD3 + +// +// Pins on the extender +// +//#define X_MIN_PIN PI4 +//#define X2_MIN_PIN PF12 +//#define Y_MIN_PIN PF4 +//#define Y2_MIN_PIN PI7 +//#define Z_MIN_PIN PF6 + +#if ENABLED(TP) && !defined(Z_MIN_PROBE_PIN) + #define Z_MIN_PROBE_PIN PH11 // Z Probe must be PH11 +#endif + +// +// Steppers +// +#define X_STEP_PIN PC15 +#define X_DIR_PIN PF0 +#define X_ENABLE_PIN PF1 +#ifndef X_CS_PIN + #define X_CS_PIN PC14 +#endif + +#define Y_STEP_PIN PE3 +#define Y_DIR_PIN PE2 +#define Y_ENABLE_PIN PE4 +#ifndef Y_CS_PIN + #define Y_CS_PIN PE1 +#endif + +#define Z_STEP_PIN PB8 +#define Z_DIR_PIN PB7 // PB7 +#define Z_ENABLE_PIN PB9 +#ifndef Z_CS_PIN + #define Z_CS_PIN PB5 +#endif + +#define E0_STEP_PIN PG12 +#define E0_DIR_PIN PG11 +#define E0_ENABLE_PIN PG13 +#ifndef E0_CS_PIN + #define E0_CS_PIN PG10 +#endif + +#define E1_STEP_PIN PD6 +#define E1_DIR_PIN PD5 +#define E1_ENABLE_PIN PD7 +#ifndef E1_CS_PIN + #define E1_CS_PIN PD4 +#endif + +#define E2_STEP_PIN PD1 +#define E2_DIR_PIN PD0 +#define E2_ENABLE_PIN PD2 +#ifndef E2_CS_PIN + #define E2_CS_PIN PC12 +#endif + +#define E3_STEP_PIN PF3 +#define E3_DIR_PIN PG3 +#define E3_ENABLE_PIN PF8 +#ifndef E3_CS_PIN + #define E3_CS_PIN PG4 +#endif + +#define E4_STEP_PIN PD14 +#define E4_DIR_PIN PD11 +#define E4_ENABLE_PIN PG2 +#ifndef E4_CS_PIN + #define E4_CS_PIN PE15 +#endif + +#define E5_STEP_PIN PE12 +#define E5_DIR_PIN PE10 +#define E5_ENABLE_PIN PF14 +#ifndef E5_CS_PIN + #define E5_CS_PIN PE7 +#endif + +#define E6_STEP_PIN PG0 +#define E6_DIR_PIN PG1 +#define E6_ENABLE_PIN PE8 +#ifndef E6_CS_PIN + #define E6_CS_PIN PF15 +#endif + +#define E7_STEP_PIN PH12 +#define E7_DIR_PIN PH15 +#define E7_ENABLE_PIN PI0 +#ifndef E7_CS_PIN + #define E7_CS_PIN PH14 +#endif + +// +// Software SPI pins for TMC2130 stepper drivers +// +#if ENABLED(TMC_USE_SW_SPI) + #ifndef TMC_SW_MOSI + #define TMC_SW_MOSI PG15 + #endif + #ifndef TMC_SW_MISO + #define TMC_SW_MISO PB6 + #endif + #ifndef TMC_SW_SCK + #define TMC_SW_SCK PB3 + #endif +#endif + +#if HAS_TMC220x + /** + * TMC2208/TMC2209 stepper drivers + * + * Hardware serial communication ports. + * If undefined software serial is used according to the pins below + */ + //#define X_HARDWARE_SERIAL Serial + //#define X2_HARDWARE_SERIAL Serial1 + //#define Y_HARDWARE_SERIAL Serial1 + //#define Y2_HARDWARE_SERIAL Serial1 + //#define Z_HARDWARE_SERIAL Serial1 + //#define Z2_HARDWARE_SERIAL Serial1 + //#define E0_HARDWARE_SERIAL Serial1 + //#define E1_HARDWARE_SERIAL Serial1 + //#define E2_HARDWARE_SERIAL Serial1 + //#define E3_HARDWARE_SERIAL Serial1 + //#define E4_HARDWARE_SERIAL Serial1 + //#define E5_HARDWARE_SERIAL Serial1 + //#define E6_HARDWARE_SERIAL Serial1 + //#define E7_HARDWARE_SERIAL Serial1 + + // + // Software serial + // + #define X_SERIAL_TX_PIN PC14 + #define X_SERIAL_RX_PIN PC14 + + #define Y_SERIAL_TX_PIN PE1 + #define Y_SERIAL_RX_PIN PE1 + + #define Z_SERIAL_TX_PIN PB5 + #define Z_SERIAL_RX_PIN PB5 + + #define E0_SERIAL_TX_PIN PG10 + #define E0_SERIAL_RX_PIN PG10 + + #define E1_SERIAL_TX_PIN PD4 + #define E1_SERIAL_RX_PIN PD4 + + #define E2_SERIAL_TX_PIN PC12 + #define E2_SERIAL_RX_PIN PC12 + + #define E3_SERIAL_TX_PIN PG4 + #define E3_SERIAL_RX_PIN PG4 + + #define E4_SERIAL_TX_PIN PE15 + #define E4_SERIAL_RX_PIN PE15 + + #define E5_SERIAL_TX_PIN PE7 + #define E5_SERIAL_RX_PIN PE7 + + #define E6_SERIAL_TX_PIN PF15 + #define E6_SERIAL_RX_PIN PF15 + + #define E7_SERIAL_TX_PIN PH14 + #define E7_SERIAL_RX_PIN PH14 + + // Reduce baud rate to improve software serial reliability + #define TMC_BAUD_RATE 19200 +#endif + +// +// Temperature Sensors +// +#define TEMP_0_PIN PC1 // T1 <-> E0 +#define TEMP_1_PIN PC2 // T2 <-> E1 +#define TEMP_2_PIN PC3 // T3 <-> E2 + +#define TEMP_3_PIN PA3 // T4 <-> E3 +#define TEMP_4_PIN PF9 // T5 <-> E4 +#define TEMP_5_PIN PF10 // T6 <-> E5 +//#define TEMP_6_PIN PF7 // T7 <-> E6 +//#define TEMP_7_PIN PF5 // T8 <-> E7 + +#define TEMP_BED_PIN PC0 // T0 <-> Bed + +// SPI for Max6675 or Max31855 Thermocouple +// Uses a separate SPI bus +// If you have a two-way thermocouple, you can customize two THERMO_CSx_PIN pins (x:1~2) + +#define THERMO_SCK_PIN PI1 // SCK +#define THERMO_DO_PIN PI2 // MISO +#define THERMO_CS1_PIN PH9 // CS1 +#define THERMO_CS2_PIN PH2 // CS2 + +#define MAX6675_SS_PIN THERMO_CS1_PIN +#define MAX6675_SS2_PIN THERMO_CS2_PIN +#define MAX6675_SCK_PIN THERMO_SCK_PIN +#define MAX6675_DO_PIN THERMO_DO_PIN + +// +// Heaters / Fans +// +#define HEATER_0_PIN PB1 // Heater0 +#define HEATER_1_PIN PA1 // Heater1 +#define HEATER_2_PIN PB0 // Heater2 + +#define HEATER_3_PIN PD15 // Heater3 +#define HEATER_4_PIN PD13 // Heater4 +#define HEATER_5_PIN PD12 // Heater5 +//#define HEATER_6_PIN PE13 // Heater6 +//#define HEATER_7_PIN PI6 // Heater7 + +#define HEATER_BED_PIN PA2 // Hotbed + +#define FAN_PIN PE5 // Fan0 +#define FAN1_PIN PE6 // Fan1 +#define FAN2_PIN PC8 // Fan2 + +#define FAN3_PIN PI5 // Fan3 +#define FAN4_PIN PE9 // Fan4 +#define FAN5_PIN PE11 // Fan5 +//#define FAN6_PIN PC9 // Fan6 +//#define FAN7_PIN PE14 // Fan7 + +// +// By default the onboard SD (SPI1) is enabled +// +#define CUSTOM_SPI_PINS +#if DISABLED(CUSTOM_SPI_PINS) + #define SDSS PB12 +#endif + +// HAL SPI1 pins group +#if ENABLED(CUSTOM_SPI_PINS) + #define SDSS PA4 + #define SD_DETECT_PIN PC4 + #define LCD_SDSS PA4 + + #define SCK_PIN PA5 + #define MISO_PIN PA6 + #define MOSI_PIN PA7 + #define SS_PIN PA4 // Chip select for SD card used by Marlin +#endif + +/** + * _____ _____ + * NC | · · | GND 5V | · · | GND + * RESET | · · | PB10(SD_DETECT) (LCD_D7) PG5 | · · | PG6 (LCD_D6) + * (MOSI)PB15 | · · | PH10(BTN_EN2) (LCD_D5) PG7 | · · | PG8 (LCD_D4) + * (SD_SS)PB12 | · · | PD10(BTN_EN1) (LCD_RS) PA8 | · · | PC10 (LCD_EN) + * (SCK)PB13 | · · | PB14(MISO) (BTN_ENC) PA15 | · · | PC11 (BEEPER) + * ￣￣ ￣￣ + * EXP2 EXP1 + */ + +// +// LCDs and Controllers +// +#if HAS_SPI_LCD + #define BEEPER_PIN PC11 + #define BTN_ENC PA15 + + #if ENABLED(CR10_STOCKDISPLAY) + + #define LCD_PINS_RS PA8 + + #define BTN_EN1 PD10 + #define BTN_EN2 PH10 + + #define LCD_PINS_ENABLE PG7 + #define LCD_PINS_D4 PG8 + + //#undef ST7920_DELAY_1 + //#undef ST7920_DELAY_2 + //#undef ST7920_DELAY_3 + + #else + + #define LCD_PINS_RS PA8 + + #define BTN_EN1 PD10 + #define BTN_EN2 PH10 + + #if DISABLED(CUSTOM_SPI_PINS) + #define SD_DETECT_PIN PB10 + #define LCD_SDSS PB12 + #endif + + #define LCD_PINS_ENABLE PC10 + #define LCD_PINS_D4 PG8 + + #if ENABLED(FYSETC_MINI_12864) + #define DOGLCD_CS PC10 + #define DOGLCD_A0 PA8 + //#define LCD_BACKLIGHT_PIN -1 + #define LCD_RESET_PIN PG8 // Must be high or open for LCD to operate normally. + #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) + #ifndef RGB_LED_R_PIN + #define RGB_LED_R_PIN PG7 + #endif + #ifndef RGB_LED_G_PIN + #define RGB_LED_G_PIN PG6 + #endif + #ifndef RGB_LED_B_PIN + #define RGB_LED_B_PIN PG5 + #endif + #elif ENABLED(FYSETC_MINI_12864_2_1) + #define NEOPIXEL_PIN PF13 + #endif + #endif // !FYSETC_MINI_12864 + + #if ENABLED(ULTIPANEL) + #define LCD_PINS_D5 PG7 + #define LCD_PINS_D6 PG6 + #define LCD_PINS_D7 PG5 + #endif + + #endif + + // Alter timing for graphical display + #if HAS_GRAPHICAL_LCD + #define BOARD_ST7920_DELAY_1 DELAY_NS(96) + #define BOARD_ST7920_DELAY_2 DELAY_NS(48) + #define BOARD_ST7920_DELAY_3 DELAY_NS(600) + #endif + + //#define DOGLCD_CS PB12 + //#define DOGLCD_A0 PA8 + //#define LCD_PINS_DC PB14 + //#define DOGLCD_MOSI PB15 + +#endif // HAS_SPI_LCD diff --git a/buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/PeripheralPins.c b/buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/PeripheralPins.c index cb2d995785..fd1f296459 100644 --- a/buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/PeripheralPins.c +++ b/buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/PeripheralPins.c @@ -90,8 +90,13 @@ const PinMap PinMap_I2C_SDA[] = { {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, {PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, {PC_9, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)}, - #if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio - {PF_0, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, + #if STM32F4X_PIN_NUM >= 144 // 144 pins mcu, 114 gpio + #if STM32F4X_PIN_NUM >= 176 + {PH_5, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, + {PH_8, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)}, + #else + {PF_0, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, + #endif #endif {NC, NP, 0} }; @@ -103,8 +108,14 @@ const PinMap PinMap_I2C_SCL[] = { {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, - #if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio - {PF_1, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, + #if STM32F4X_PIN_NUM >= 144 // 144 pins mcu, 114 gpio + #if STM32F4X_PIN_NUM >= 176 + //{PF_1, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, + {PH_4, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, + {PH_7, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)}, + #else + {PF_1, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, + #endif #endif {NC, NP, 0} }; @@ -141,8 +152,10 @@ const PinMap PinMap_PWM[] = { */ //{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 //{PA_0, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1 - //{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - //{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 + {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 is bltouch analog? + {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 is bltouch analog? + //{PA_1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2 + //{PA_2, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3 //{PA_2, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1 //{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 //{PA_3, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4 @@ -173,7 +186,7 @@ const PinMap PinMap_PWM[] = { //{PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4 //{PB_9, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1 //{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - //{PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 + {PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 //{PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N //{PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N //{PB_14, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N @@ -186,21 +199,28 @@ const PinMap PinMap_PWM[] = { //{PC_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2 //{PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 //{PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4 - //{PD_13, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2 - //{PD_15, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4 + {PD_13, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2 + {PD_15, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4 //{PE_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N - //{PE_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1 + {PE_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1 //{PE_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N - //{PE_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2 + {PE_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2 //{PE_12, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N - //{PE_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3 - //{PE_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4 + {PE_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3 + {PE_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4 #if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio //{PF_6, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1 //{PF_7, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1 //{PF_8, TIM13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1 //{PF_9, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1 #endif + #if STM32F4X_PIN_NUM >= 176 //176 pins mcu, 140 gpio + {PH_10, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1 + {PH_6, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 1, 0)}, // TIM12_CH1 + //{PH_11, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2 + {PI_5, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1 + {PI_6, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2 + #endif {NC, NP, 0} }; #endif @@ -275,7 +295,8 @@ const PinMap PinMap_UART_CTS[] = { #ifdef HAL_SPI_MODULE_ENABLED const PinMap PinMap_SPI_MOSI[] = { - {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, + //{PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, + {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, {PC_12, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, {NC, NP, 0} diff --git a/platformio.ini b/platformio.ini index 9cf2c918ed..df3dcb0f66 100644 --- a/platformio.ini +++ b/platformio.ini @@ -586,7 +586,7 @@ lib_ignore = Adafruit NeoPixel # # STM32F401VE -# 'STEVAL-3DP001)' STM32F401VE board - https://www.st.com/en/evaluation-tools/steval-3dp001v1.html +# 'STEVAL-3DP001V1' STM32F401VE board - https://www.st.com/en/evaluation-tools/steval-3dp001v1.html # [env:STM32F401VE_STEVAL] platform = ststm32 @@ -677,6 +677,37 @@ src_filter = ${common.default_src_filter} + debug_tool = stlink debug_init_break = +# +# Bigtreetech GTR V1.0 (STM32F407IGT6 ARM Cortex-M4) +# +[env:BIGTREE_GTR_V1_0] +platform = ststm32@>=5.7.0 +framework = arduino +platform_packages = framework-arduinoststm32@>=3.10700.191028 +board = BigTree_SKR_Pro +extra_scripts = pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py +build_flags = ${common.build_flags} + -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -DUSB_PRODUCT=\"STM32F407IG\" + -DTARGET_STM32F4 -DSTM32F407IX -DVECT_TAB_OFFSET=0x8000 + -DHAVE_HWSERIAL3 + -DHAVE_HWSERIAL6 + -DPIN_SERIAL3_RX=PD_9 + -DPIN_SERIAL3_TX=PD_8 + -DPIN_SERIAL6_RX=PC_7 + -DPIN_SERIAL6_TX=PC_6 + + -IMarlin/src/HAL/HAL_STM32 +lib_deps = + U8glib-HAL=https://github.com/MarlinFirmware/U8glib-HAL/archive/bugfix.zip + LiquidCrystal + TMCStepper@>=0.5.2,<1.0.0 + Adafruit NeoPixel + LiquidTWI2=https://github.com/lincomatic/LiquidTWI2/archive/master.zip + Arduino-L6470=https://github.com/ameyer/Arduino-L6470/archive/dev.zip +lib_ignore = SoftwareSerial, SoftwareSerialM +src_filter = ${common.default_src_filter} + +monitor_speed = 250000 + # # BigTreeTech BTT002 (STM32F407VET6 ARM Cortex-M4) #