diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 17425cdcbd..4e0786199d 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -27,7 +27,7 @@ #define STRING_VERSION "v1.0.2" #define STRING_URL "reprap.org" #define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time -#define STRING_CONFIG_H_AUTHOR "(roglio, Aurora Z605)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. #define STRING_SPLASH STRING_VERSION " - " STRING_URL // will be shown during bootup // SERIAL_PORT selects which serial port should be used for communication with the host. @@ -36,8 +36,7 @@ #define SERIAL_PORT 0 // This determines the communication speed of the printer -//#define BAUDRATE 250000 -#define BAUDRATE 115200 +#define BAUDRATE 250000 // This enables the serial port associated to the Bluetooth interface //#define BTENABLED // Enable BT interface on AT90USB devices @@ -45,11 +44,11 @@ // The following define selects which electronics board you have. // Please choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MELZI_1284 + #define MOTHERBOARD BOARD_ULTIMAKER #endif // Define this to set a custom name for your generic Mendel, -#define CUSTOM_MENDEL_NAME "Aurora Z605" +// #define CUSTOM_MENDEL_NAME "This Mendel" // Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) // You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) @@ -105,10 +104,10 @@ // 147 is Pt100 with 4k7 pullup // 110 is Pt100 with 1k pullup (non standard) -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 -1 #define TEMP_SENSOR_1 -1 -#define TEMP_SENSOR_2 -1 -#define TEMP_SENSOR_BED 1 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_BED 0 // This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted. //#define TEMP_SENSOR_1_AS_REDUNDANT @@ -320,10 +319,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define DISABLE_E false // For all extruders #define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled -#define INVERT_X_DIR false // for Mendel set to false, for Orca set to true +#define INVERT_X_DIR true // for Mendel set to false, for Orca set to true #define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false -#define INVERT_Z_DIR false // for Mendel set to false, for Orca set to true -#define INVERT_E0_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false +#define INVERT_Z_DIR true // for Mendel set to false, for Orca set to true +#define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false @@ -482,20 +481,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // default settings -//#define DEFAULT_AXIS_STEPS_PER_UNIT {78.7402, 78.7402, 200.0*8/3, 760*1.1} // default steps per unit for Ultimaker -//#define DEFAULT_AXIS_STEPS_PER_UNIT {44.3090, 22.1545, 1600, 53.5} // rigidbot values -//#define DEFAULT_AXIS_STEPS_PER_UNIT {85.3333, 85.3333, 2560, 158.8308} // geeetech values -//#define DEFAULT_AXIS_STEPS_PER_UNIT {85.3333, 85.3333, 200.0*8/3, 158.8308} -#define DEFAULT_AXIS_STEPS_PER_UNIT {98.5000, 98.5000, 397.8000, 158.8308} -//#define DEFAULT_MAX_FEEDRATE {500, 500, 5, 25} // (mm/sec) marlin default -#define DEFAULT_MAX_FEEDRATE {400, 400, 2, 45} // (mm/sec) geeetech values -//#define DEFAULT_MAX_ACCELERATION {9000,9000,100,10000} // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for Skeinforge 40+, for older versions raise them a lot. -#define DEFAULT_MAX_ACCELERATION {5000,5000,50,5000} // geeetech values - -//#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E max acceleration in mm/s^2 for printing moves -//#define DEFAULT_RETRACT_ACCELERATION 3000 // X, Y, Z and E max acceleration in mm/s^2 for retracts -#define DEFAULT_ACCELERATION 1000 // geeetech values -#define DEFAULT_RETRACT_ACCELERATION 2000 // geeetech values +#define DEFAULT_AXIS_STEPS_PER_UNIT {78.7402,78.7402,200.0*8/3,760*1.1} // default steps per unit for Ultimaker +#define DEFAULT_MAX_FEEDRATE {500, 500, 5, 25} // (mm/sec) +#define DEFAULT_MAX_ACCELERATION {9000,9000,100,10000} // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for Skeinforge 40+, for older versions raise them a lot. + +#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E max acceleration in mm/s^2 for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // X, Y, Z and E max acceleration in mm/s^2 for retracts // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). @@ -534,11 +525,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // Preheat Constants #define PLA_PREHEAT_HOTEND_TEMP 180 -#define PLA_PREHEAT_HPB_TEMP 45 +#define PLA_PREHEAT_HPB_TEMP 70 #define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 -#define ABS_PREHEAT_HOTEND_TEMP 200 -#define ABS_PREHEAT_HPB_TEMP 70 +#define ABS_PREHEAT_HOTEND_TEMP 240 +#define ABS_PREHEAT_HPB_TEMP 100 #define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 //LCD and SD support @@ -570,7 +561,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // // ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // The RepRapWorld REPRAPWORLD_KEYPAD v1.1 // http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626