Browse Source

Distinguish between analog/digital auto fans (#13298)

pull/1/head
Scott Lahteine 5 years ago
committed by GitHub
parent
commit
2212da453a
No known key found for this signature in database GPG Key ID: 4AEE18F83AFDEB23
  1. 9
      Marlin/src/HAL/HAL_AVR/fastio_1280.h
  2. 238
      Marlin/src/HAL/HAL_AVR/fastio_AVR.cpp
  3. 9
      Marlin/src/HAL/HAL_AVR/fastio_AVR.h
  4. 4
      Marlin/src/HAL/HAL_AVR/pinsDebug_Teensyduino.h
  5. 4
      Marlin/src/HAL/HAL_AVR/servo_AVR.cpp
  6. 4
      Marlin/src/HAL/HAL_DUE/Servo_Due.cpp
  7. 4
      Marlin/src/HAL/HAL_DUE/Tone.cpp
  8. 6
      Marlin/src/HAL/HAL_DUE/fastio_Due.h
  9. 2
      Marlin/src/HAL/HAL_DUE/pinsDebug.h
  10. 4
      Marlin/src/HAL/HAL_ESP32/fastio_ESP32.h
  11. 4
      Marlin/src/HAL/HAL_LINUX/fastio.h
  12. 4
      Marlin/src/HAL/HAL_LPC1768/fastio.h
  13. 2
      Marlin/src/HAL/HAL_LPC1768/pinsDebug.h
  14. 4
      Marlin/src/HAL/HAL_STM32/fastio_STM32.h
  15. 4
      Marlin/src/HAL/HAL_STM32F1/fastio_STM32F1.h
  16. 4
      Marlin/src/HAL/HAL_STM32F4/fastio_STM32F4.h
  17. 20
      Marlin/src/HAL/HAL_STM32F7/TMC2660.cpp
  18. 4
      Marlin/src/HAL/HAL_STM32F7/fastio_STM32F7.h
  19. 4
      Marlin/src/HAL/HAL_TEENSY31_32/fastio_Teensy.h
  20. 4
      Marlin/src/HAL/HAL_TEENSY35_36/fastio_Teensy.h
  21. 4
      Marlin/src/HAL/shared/HAL_spi_L6470.cpp
  22. 10
      Marlin/src/gcode/config/M43.cpp
  23. 4
      Marlin/src/gcode/control/M226.cpp
  24. 2
      Marlin/src/gcode/control/M42.cpp
  25. 2
      Marlin/src/module/endstops.cpp
  26. 64
      Marlin/src/module/temperature.cpp
  27. 8
      Marlin/src/sd/Sd2Card.cpp

9
Marlin/src/HAL/HAL_AVR/fastio_1280.h

@ -24,9 +24,9 @@
/**
* Pin mapping for the 1280 and 2560
*
* Hardware Pin : 02 03 06 07 01 05 15 16 17 18 23 24 25 26 64 63 13 12 46 45 44 43 78 77 76 75 74 73 72 71 60 59 58 57 56 55 54 53 50 70 52 51 42 41 40 39 38 37 36 35 22 21 20 19 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 04 08 09 10 11 14 27 28 29 30 31 32 33 34 47 48 49 61 62 65 66 67 68 69 79 80 81 98 99 100
* Port : E0 E1 E4 E5 G5 E3 H3 H4 H5 H6 B4 B5 B6 B7 J1 J0 H1 H0 D3 D2 D1 D0 A0 A1 A2 A3 A4 A5 A6 A7 C7 C6 C5 C4 C3 C2 C1 C0 D7 G2 G1 G0 L7 L6 L5 L4 L3 L2 L1 L0 B3 B2 B1 B0 F0 F1 F2 F3 F4 F5 F6 F7 K0 K1 K2 K3 K4 K5 K6 K7 E2 E6 E7 xx xx H2 H7 G3 G4 xx xx xx xx xx D4 D5 D6 xx xx J2 J3 J4 J5 J6 J7 xx xx xx xx xx
* Logical Pin : 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
* Hardware Pin : 02 03 06 07 01 05 15 16 17 18 23 24 25 26 64 63 13 12 46 45 44 43 78 77 76 75 74 73 72 71 60 59 58 57 56 55 54 53 50 70 52 51 42 41 40 39 38 37 36 35 22 21 20 19 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 | 04 08 09 10 11 14 27 28 29 30 31 32 33 34 47 48 49 61 62 65 66 67 68 69 79 80 81 98 99 100
* Port : E0 E1 E4 E5 G5 E3 H3 H4 H5 H6 B4 B5 B6 B7 J1 J0 H1 H0 D3 D2 D1 D0 A0 A1 A2 A3 A4 A5 A6 A7 C7 C6 C5 C4 C3 C2 C1 C0 D7 G2 G1 G0 L7 L6 L5 L4 L3 L2 L1 L0 B3 B2 B1 B0 F0 F1 F2 F3 F4 F5 F6 F7 K0 K1 K2 K3 K4 K5 K6 K7 | E2 E6 E7 xx xx H2 H7 G3 G4 xx xx xx xx xx D4 D5 D6 xx xx J2 J3 J4 J5 J6 J7 xx xx xx xx xx
* Logical Pin : 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 | 78 79 80 xx xx 84 85 71 70 xx xx xx xx xx 81 82 83 xx xx 72 72 75 76 77 74 xx xx xx xx xx
*/
#include "fastio_AVR.h"
@ -487,6 +487,9 @@
#define DIO69_DDR DDRK
#define DIO69_PWM NULL
//#define FASTIO_EXT_START 70
//#define FASTIO_EXT_END 85
#define DIO70_PIN PING4
#define DIO70_RPORT PING
#define DIO70_WPORT PORTG

238
Marlin/src/HAL/HAL_AVR/fastio_AVR.cpp

@ -0,0 +1,238 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Fast I/O for extended pins
*/
#ifdef __AVR__
#include "fastio_AVR.h"
#ifdef FASTIO_EXT_START
#include <Arduino.h>
#define _IS_EXT(P) WITHIN(P, FASTIO_EXT_START, FASTIO_EXT_END)
void extDigitalWrite(const int8_t pin, const uint8_t state) {
#define _WCASE(N) case N: WRITE(N, state); break
switch (pin) {
default: digitalWrite(pin, state);
#if _IS_EXT(70)
_WCASE(70);
#endif
#if _IS_EXT(71)
_WCASE(71);
#endif
#if _IS_EXT(72)
_WCASE(72);
#endif
#if _IS_EXT(73)
_WCASE(73);
#endif
#if _IS_EXT(74)
_WCASE(74);
#endif
#if _IS_EXT(75)
_WCASE(75);
#endif
#if _IS_EXT(76)
_WCASE(76);
#endif
#if _IS_EXT(77)
_WCASE(77);
#endif
#if _IS_EXT(78)
_WCASE(78);
#endif
#if _IS_EXT(79)
_WCASE(79);
#endif
#if _IS_EXT(80)
_WCASE(80);
#endif
#if _IS_EXT(81)
_WCASE(81);
#endif
#if _IS_EXT(82)
_WCASE(82);
#endif
#if _IS_EXT(83)
_WCASE(83);
#endif
#if _IS_EXT(84)
_WCASE(84);
#endif
#if _IS_EXT(85)
_WCASE(85);
#endif
#if _IS_EXT(86)
_WCASE(86);
#endif
#if _IS_EXT(87)
_WCASE(87);
#endif
#if _IS_EXT(88)
_WCASE(88);
#endif
#if _IS_EXT(89)
_WCASE(89);
#endif
#if _IS_EXT(90)
_WCASE(90);
#endif
#if _IS_EXT(91)
_WCASE(91);
#endif
#if _IS_EXT(92)
_WCASE(92);
#endif
#if _IS_EXT(93)
_WCASE(93);
#endif
#if _IS_EXT(94)
_WCASE(94);
#endif
#if _IS_EXT(95)
_WCASE(95);
#endif
#if _IS_EXT(96)
_WCASE(96);
#endif
#if _IS_EXT(97)
_WCASE(97);
#endif
#if _IS_EXT(98)
_WCASE(98);
#endif
#if _IS_EXT(99)
_WCASE(99);
#endif
#if _IS_EXT(100)
_WCASE(100);
#endif
}
}
uint8_t extDigitalRead(const int8_t pin) {
#define _RCASE(N) case N: return READ(N)
switch (pin) {
default: return digitalRead(pin);
#if _IS_EXT(70)
_RCASE(70);
#endif
#if _IS_EXT(71)
_RCASE(71);
#endif
#if _IS_EXT(72)
_RCASE(72);
#endif
#if _IS_EXT(73)
_RCASE(73);
#endif
#if _IS_EXT(74)
_RCASE(74);
#endif
#if _IS_EXT(75)
_RCASE(75);
#endif
#if _IS_EXT(76)
_RCASE(76);
#endif
#if _IS_EXT(77)
_RCASE(77);
#endif
#if _IS_EXT(78)
_RCASE(78);
#endif
#if _IS_EXT(79)
_RCASE(79);
#endif
#if _IS_EXT(80)
_RCASE(80);
#endif
#if _IS_EXT(81)
_RCASE(81);
#endif
#if _IS_EXT(82)
_RCASE(82);
#endif
#if _IS_EXT(83)
_RCASE(83);
#endif
#if _IS_EXT(84)
_RCASE(84);
#endif
#if _IS_EXT(85)
_RCASE(85);
#endif
#if _IS_EXT(86)
_RCASE(86);
#endif
#if _IS_EXT(87)
_RCASE(87);
#endif
#if _IS_EXT(88)
_RCASE(88);
#endif
#if _IS_EXT(89)
_RCASE(89);
#endif
#if _IS_EXT(90)
_RCASE(90);
#endif
#if _IS_EXT(91)
_RCASE(91);
#endif
#if _IS_EXT(92)
_RCASE(92);
#endif
#if _IS_EXT(93)
_RCASE(93);
#endif
#if _IS_EXT(94)
_RCASE(94);
#endif
#if _IS_EXT(95)
_RCASE(95);
#endif
#if _IS_EXT(96)
_RCASE(96);
#endif
#if _IS_EXT(97)
_RCASE(97);
#endif
#if _IS_EXT(98)
_RCASE(98);
#endif
#if _IS_EXT(99)
_RCASE(99);
#endif
#if _IS_EXT(100)
_RCASE(100);
#endif
}
}
#endif // FASTIO_EXT_START
#endif // __AVR__

9
Marlin/src/HAL/HAL_AVR/fastio_AVR.h

@ -85,6 +85,15 @@
#define _GET_OUTPUT(IO) TEST(DIO ## IO ## _DDR, DIO ## IO ## _PIN)
#define _GET_TIMER(IO) DIO ## IO ## _PWM
// digitalRead/Write wrappers
#ifdef FASTIO_EXT_START
void extDigitalWrite(const int8_t pin, const uint8_t state);
uint8_t extDigitalRead(const int8_t pin);
#else
#define extDigitalWrite(IO,V) digitalWrite(IO,V)
#define extDigitalRead(IO) digitalRead(IO)
#endif
#define READ(IO) _READ(IO)
#define WRITE(IO,V) _WRITE(IO,V)
#define TOGGLE(IO) _TOGGLE(IO)

4
Marlin/src/HAL/HAL_AVR/pinsDebug_Teensyduino.h

@ -105,7 +105,7 @@ const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
// digitalPinToBitMask(pin) is OK
#define digitalRead_mod(p) digitalRead(p) // Teensyduino's version of digitalRead doesn't
// disable the PWMs so we can use it as is
#define digitalRead_mod(p) extDigitalRead(p) // Teensyduino's version of digitalRead doesn't
// disable the PWMs so we can use it as is
// portModeRegister(pin) is OK

4
Marlin/src/HAL/HAL_AVR/servo_AVR.cpp

@ -73,14 +73,14 @@ static inline void handle_interrupts(timer16_Sequence_t timer, volatile uint16_t
*TCNTn = 0; // channel set to -1 indicated that refresh interval completed so reset the timer
else {
if (SERVO_INDEX(timer, Channel[timer]) < ServoCount && SERVO(timer, Channel[timer]).Pin.isActive)
digitalWrite(SERVO(timer, Channel[timer]).Pin.nbr, LOW); // pulse this channel low if activated
extDigitalWrite(SERVO(timer, Channel[timer]).Pin.nbr, LOW); // pulse this channel low if activated
}
Channel[timer]++; // increment to the next channel
if (SERVO_INDEX(timer, Channel[timer]) < ServoCount && Channel[timer] < SERVOS_PER_TIMER) {
*OCRnA = *TCNTn + SERVO(timer, Channel[timer]).ticks;
if (SERVO(timer, Channel[timer]).Pin.isActive) // check if activated
digitalWrite(SERVO(timer, Channel[timer]).Pin.nbr, HIGH); // it's an active channel so pulse it high
extDigitalWrite(SERVO(timer, Channel[timer]).Pin.nbr, HIGH); // it's an active channel so pulse it high
}
else {
// finished all channels so wait for the refresh period to expire before starting over

4
Marlin/src/HAL/HAL_DUE/Servo_Due.cpp

@ -77,13 +77,13 @@ void Servo_Handler(timer16_Sequence_t timer, Tc *tc, uint8_t channel) {
if (Channel[timer] < 0)
tc->TC_CHANNEL[channel].TC_CCR |= TC_CCR_SWTRG; // channel set to -1 indicated that refresh interval completed so reset the timer
else if (SERVO_INDEX(timer, Channel[timer]) < ServoCount && SERVO(timer, Channel[timer]).Pin.isActive)
digitalWrite(SERVO(timer, Channel[timer]).Pin.nbr, LOW); // pulse this channel low if activated
extDigitalWrite(SERVO(timer, Channel[timer]).Pin.nbr, LOW); // pulse this channel low if activated
Channel[timer]++; // increment to the next channel
if (SERVO_INDEX(timer, Channel[timer]) < ServoCount && Channel[timer] < SERVOS_PER_TIMER) {
tc->TC_CHANNEL[channel].TC_RA = tc->TC_CHANNEL[channel].TC_CV + SERVO(timer,Channel[timer]).ticks;
if (SERVO(timer,Channel[timer]).Pin.isActive) // check if activated
digitalWrite(SERVO(timer, Channel[timer]).Pin.nbr, HIGH); // its an active channel so pulse it high
extDigitalWrite(SERVO(timer, Channel[timer]).Pin.nbr, HIGH); // its an active channel so pulse it high
}
else {
// finished all channels so wait for the refresh period to expire before starting over

4
Marlin/src/HAL/HAL_DUE/Tone.cpp

@ -42,7 +42,7 @@ void tone(const pin_t _pin, const unsigned int frequency, const unsigned long du
void noTone(const pin_t _pin) {
HAL_timer_disable_interrupt(TONE_TIMER_NUM);
digitalWrite(_pin, LOW);
extDigitalWrite(_pin, LOW);
}
HAL_TONE_TIMER_ISR {
@ -51,7 +51,7 @@ HAL_TONE_TIMER_ISR {
if (toggles) {
toggles--;
digitalWrite(tone_pin, (pin_state ^= 1));
extDigitalWrite(tone_pin, (pin_state ^= 1));
}
else noTone(tone_pin); // turn off interrupt
}

6
Marlin/src/HAL/HAL_DUE/fastio_Due.h

@ -81,8 +81,6 @@
// Toggle a pin
#define _TOGGLE(IO) _WRITE(IO, !READ(IO))
#include <pins_arduino.h>
#if MB(PRINTRBOARD_G2)
#include "G2_pins.h"
@ -185,6 +183,10 @@
// Shorthand
#define OUT_WRITE(IO,V) { SET_OUTPUT(IO); WRITE(IO,V); }
// digitalRead/Write wrappers
#define extDigitalRead(IO) digitalRead(IO)
#define extDigitalWrite(IO,V) digitalWrite(IO,V)
/**
* Ports and functions
* Added as necessary or if I feel like it- not a comprehensive list!

2
Marlin/src/HAL/HAL_DUE/pinsDebug.h

@ -63,7 +63,7 @@
#define NUMBER_PINS_TOTAL PINS_COUNT
#define digitalRead_mod(p) digitalRead(p) // AVR digitalRead disabled PWM before it read the pin
#define digitalRead_mod(p) extDigitalRead(p) // AVR digitalRead disabled PWM before it read the pin
#define PRINT_PORT(p)
#define NAME_FORMAT(p) PSTR("%-##p##s")
#define PRINT_ARRAY_NAME(x) do {sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer);} while (0)

4
Marlin/src/HAL/HAL_ESP32/fastio_ESP32.h

@ -53,6 +53,10 @@
#define OUT_WRITE(IO,V) do{ _SET_OUTPUT(IO); WRITE(IO,V); }while(0)
// digitalRead/Write wrappers
#define extDigitalRead(IO) digitalRead(IO)
#define extDigitalWrite(IO,V) digitalWrite(IO,V)
//
// Ports and functions
//

4
Marlin/src/HAL/HAL_LINUX/fastio.h

@ -121,3 +121,7 @@
// Shorthand
#define OUT_WRITE(IO,V) do{ SET_OUTPUT(IO); WRITE(IO,V); }while(0)
// digitalRead/Write wrappers
#define extDigitalRead(IO) digitalRead(IO)
#define extDigitalWrite(IO,V) digitalWrite(IO,V)

4
Marlin/src/HAL/HAL_LPC1768/fastio.h

@ -121,3 +121,7 @@
// Shorthand
#define OUT_WRITE(IO,V) do{ SET_OUTPUT(IO); WRITE(IO,V); }while(0)
// digitalRead/Write wrappers
#define extDigitalRead(IO) digitalRead(IO)
#define extDigitalWrite(IO,V) digitalWrite(IO,V)

2
Marlin/src/HAL/HAL_LPC1768/pinsDebug.h

@ -32,7 +32,7 @@
#define pwm_details(pin) pin = pin // do nothing // print PWM details
#define pwm_status(pin) false //Print a pin's PWM status. Return true if it's currently a PWM pin.
#define IS_ANALOG(P) (DIGITAL_PIN_TO_ANALOG_PIN(P) >= 0 ? 1 : 0)
#define digitalRead_mod(p) digitalRead(p)
#define digitalRead_mod(p) extDigitalRead(p)
#define PRINT_PORT(p)
#define GET_ARRAY_PIN(p) pin_array[p].pin
#define NAME_FORMAT(p) PSTR("%-##p##s")

4
Marlin/src/HAL/HAL_STM32/fastio_STM32.h

@ -79,3 +79,7 @@ void FastIO_init(); // Must be called before using fast io macros
#define PWM_PIN(p) digitalPinHasPWM(p)
#define USEABLE_HARDWARE_PWM(p) PWM_PIN(p)
// digitalRead/Write wrappers
#define extDigitalRead(IO) digitalRead(IO)
#define extDigitalWrite(IO,V) digitalWrite(IO,V)

4
Marlin/src/HAL/HAL_STM32F1/fastio_STM32F1.h

@ -50,3 +50,7 @@
#define PWM_PIN(p) true
#define USEABLE_HARDWARE_PWM(p) PWM_PIN(p)
// digitalRead/Write wrappers
#define extDigitalRead(IO) digitalRead(IO)
#define extDigitalWrite(IO,V) digitalWrite(IO,V)

4
Marlin/src/HAL/HAL_STM32F4/fastio_STM32F4.h

@ -54,6 +54,10 @@
#define PWM_PIN(p) true
#define USEABLE_HARDWARE_PWM(p) PWM_PIN(p)
// digitalRead/Write wrappers
#define extDigitalRead(IO) digitalRead(IO)
#define extDigitalWrite(IO,V) digitalWrite(IO,V)
//
// Pins Definitions
//

20
Marlin/src/HAL/HAL_STM32F7/TMC2660.cpp

@ -191,9 +191,9 @@ void TMC26XStepper::start() {
pinMode(dir_pin, OUTPUT);
pinMode(cs_pin, OUTPUT);
//SET_OUTPUT(STEPPER_ENABLE_PIN);
digitalWrite(step_pin, LOW);
digitalWrite(dir_pin, LOW);
digitalWrite(cs_pin, HIGH);
extDigitalWrite(step_pin, LOW);
extDigitalWrite(dir_pin, LOW);
extDigitalWrite(cs_pin, HIGH);
STEPPER_SPI.begin();
STEPPER_SPI.beginTransaction(SPISettings(4000000, MSBFIRST, SPI_MODE3));
@ -261,10 +261,10 @@ char TMC26XStepper::move(void) {
// increment or decrement the step number,
// depending on direction:
if (this->direction == 1)
digitalWrite(step_pin, HIGH);
extDigitalWrite(step_pin, HIGH);
else {
digitalWrite(dir_pin, HIGH);
digitalWrite(step_pin, HIGH);
extDigitalWrite(dir_pin, HIGH);
extDigitalWrite(step_pin, HIGH);
}
// get the timeStamp of when you stepped:
this->last_step_time = time;
@ -272,8 +272,8 @@ char TMC26XStepper::move(void) {
// decrement the steps left:
steps_left--;
//disable the step & dir pins
digitalWrite(step_pin, LOW);
digitalWrite(dir_pin, LOW);
extDigitalWrite(step_pin, LOW);
extDigitalWrite(dir_pin, LOW);
}
return -1;
}
@ -864,7 +864,7 @@ inline void TMC26XStepper::send262(uint32_t datagram) {
//}
//select the TMC driver
digitalWrite(cs_pin, LOW);
extDigitalWrite(cs_pin, LOW);
//ensure that only valid bist are set (0-19)
//datagram &=REGISTER_BIT_PATTERN;
@ -893,7 +893,7 @@ inline void TMC26XStepper::send262(uint32_t datagram) {
#endif
//deselect the TMC chip
digitalWrite(cs_pin, HIGH);
extDigitalWrite(cs_pin, HIGH);
//restore the previous SPI mode if neccessary
//if the mode is not correct set it to mode 3

4
Marlin/src/HAL/HAL_STM32F7/fastio_STM32F7.h

@ -53,6 +53,10 @@
#define PWM_PIN(p) true
#define USEABLE_HARDWARE_PWM(p) PWM_PIN(p)
// digitalRead/Write wrappers
#define extDigitalRead(IO) digitalRead(IO)
#define extDigitalWrite(IO,V) digitalWrite(IO,V)
//
// Pins Definitions
//

4
Marlin/src/HAL/HAL_TEENSY31_32/fastio_Teensy.h

@ -85,6 +85,10 @@
#define OUT_WRITE(IO,V) do{ SET_OUTPUT(IO); WRITE(IO,V); }while(0)
// digitalRead/Write wrappers
#define extDigitalRead(IO) digitalRead(IO)
#define extDigitalWrite(IO,V) digitalWrite(IO,V)
/**
* Ports, functions, and pins
*/

4
Marlin/src/HAL/HAL_TEENSY35_36/fastio_Teensy.h

@ -84,6 +84,10 @@
#define OUT_WRITE(IO,V) do{ SET_OUTPUT(IO); WRITE(IO,V); }while(0)
// digitalRead/Write wrappers
#define extDigitalRead(IO) digitalRead(IO)
#define extDigitalWrite(IO,V) digitalWrite(IO,V)
/**
* Ports, functions, and pins
*/

4
Marlin/src/HAL/shared/HAL_spi_L6470.cpp

@ -83,7 +83,7 @@ uint8_t L6470_transfer(uint8_t data, int16_t ss_pin, const uint8_t chain_positio
uint8_t data_out = 0;
// first device in chain has data sent last
digitalWrite(ss_pin, LOW);
extDigitalWrite(ss_pin, LOW);
for (uint8_t i = L6470::chain[0]; (i >= 1) && !spi_abort; i--) { // stop sending data if spi_abort is active
DISABLE_ISRS(); // disable interrupts during SPI transfer (can't allow partial command to chips)
@ -92,7 +92,7 @@ uint8_t L6470_transfer(uint8_t data, int16_t ss_pin, const uint8_t chain_positio
if (i == chain_position) data_out = temp;
}
digitalWrite(ss_pin, HIGH);
extDigitalWrite(ss_pin, HIGH);
return data_out;
}

10
Marlin/src/gcode/config/M43.cpp

@ -77,9 +77,9 @@ inline void toggle_pins() {
{
pinMode(pin, OUTPUT);
for (int16_t j = 0; j < repeat; j++) {
digitalWrite(pin, 0); safe_delay(wait);
digitalWrite(pin, 1); safe_delay(wait);
digitalWrite(pin, 0); safe_delay(wait);
extDigitalWrite(pin, 0); safe_delay(wait);
extDigitalWrite(pin, 1); safe_delay(wait);
extDigitalWrite(pin, 0); safe_delay(wait);
}
}
@ -285,7 +285,7 @@ void GcodeSuite::M43() {
pin_state[pin - first_pin] = analogRead(DIGITAL_PIN_TO_ANALOG_PIN(pin)); // int16_t pin_state[...]
else
//*/
pin_state[i - first_pin] = digitalRead(pin);
pin_state[i - first_pin] = extDigitalRead(pin);
}
#if HAS_RESUME_CONTINUE
@ -307,7 +307,7 @@ void GcodeSuite::M43() {
? analogRead(DIGITAL_PIN_TO_ANALOG_PIN(pin)) : // int16_t val
:
//*/
digitalRead(pin);
extDigitalRead(pin);
if (val != pin_state[i - first_pin]) {
report_pin_state_extended(pin, ignore_protection, false);
pin_state[i - first_pin] = val;

4
Marlin/src/gcode/control/M226.cpp

@ -43,9 +43,9 @@ void GcodeSuite::M226() {
switch (pin_state) {
case 1: target = HIGH; break;
case 0: target = LOW; break;
case -1: target = !digitalRead(pin); break;
case -1: target = !extDigitalRead(pin); break;
}
while (digitalRead(pin) != target) idle();
while (extDigitalRead(pin) != target) idle();
}
} // pin_state -1 0 1 && pin > -1
} // parser.seen('P')

2
Marlin/src/gcode/control/M42.cpp

@ -50,7 +50,7 @@ void GcodeSuite::M42() {
if (!parser.boolval('I') && pin_is_protected(pin)) return protected_pin_err();
pinMode(pin, OUTPUT);
digitalWrite(pin, pin_status);
extDigitalWrite(pin, pin_status);
analogWrite(pin, pin_status);
#if FAN_COUNT > 0

2
Marlin/src/module/endstops.cpp

@ -453,7 +453,7 @@ void _O2 Endstops::M119() {
}
SERIAL_ECHOPGM(MSG_FILAMENT_RUNOUT_SENSOR);
if (i > 1) { SERIAL_CHAR(' '); SERIAL_CHAR('0' + i); }
print_es_state(digitalRead(pin) != FIL_RUNOUT_INVERTING);
print_es_state(extDigitalRead(pin) != FIL_RUNOUT_INVERTING);
}
#endif
#endif

64
Marlin/src/module/temperature.cpp

@ -632,15 +632,16 @@ int Temperature::getHeaterPower(const int heater) {
#if HAS_AUTO_FAN
void Temperature::checkExtruderAutoFans() {
static const pin_t fanPin[] PROGMEM = { E0_AUTO_FAN_PIN, E1_AUTO_FAN_PIN, E2_AUTO_FAN_PIN, E3_AUTO_FAN_PIN, E4_AUTO_FAN_PIN, E5_AUTO_FAN_PIN, CHAMBER_AUTO_FAN_PIN };
static const uint8_t fanBit[] PROGMEM = {
0,
AUTO_1_IS_0 ? 0 : 1,
AUTO_2_IS_0 ? 0 : AUTO_2_IS_1 ? 1 : 2,
AUTO_3_IS_0 ? 0 : AUTO_3_IS_1 ? 1 : AUTO_3_IS_2 ? 2 : 3,
AUTO_4_IS_0 ? 0 : AUTO_4_IS_1 ? 1 : AUTO_4_IS_2 ? 2 : AUTO_4_IS_3 ? 3 : 4,
AUTO_5_IS_0 ? 0 : AUTO_5_IS_1 ? 1 : AUTO_5_IS_2 ? 2 : AUTO_5_IS_3 ? 3 : AUTO_5_IS_4 ? 4 : 5,
AUTO_CHAMBER_IS_0 ? 0 : AUTO_CHAMBER_IS_1 ? 1 : AUTO_CHAMBER_IS_2 ? 2 : AUTO_CHAMBER_IS_3 ? 3 : AUTO_CHAMBER_IS_4 ? 4 : 5
AUTO_4_IS_0 ? 0 : AUTO_4_IS_1 ? 1 : AUTO_4_IS_2 ? 2 : AUTO_4_IS_3 ? 3 : 4,
AUTO_5_IS_0 ? 0 : AUTO_5_IS_1 ? 1 : AUTO_5_IS_2 ? 2 : AUTO_5_IS_3 ? 3 : AUTO_5_IS_4 ? 4 : 5
#if HAS_TEMP_CHAMBER
, AUTO_CHAMBER_IS_0 ? 0 : AUTO_CHAMBER_IS_1 ? 1 : AUTO_CHAMBER_IS_2 ? 2 : AUTO_CHAMBER_IS_3 ? 3 : AUTO_CHAMBER_IS_4 ? 4 : AUTO_CHAMBER_IS_5 ? 5 : 6
#endif
};
uint8_t fanState = 0;
@ -650,29 +651,50 @@ int Temperature::getHeaterPower(const int heater) {
#if HAS_TEMP_CHAMBER
if (current_temperature_chamber > EXTRUDER_AUTO_FAN_TEMPERATURE)
SBI(fanState, pgm_read_byte(&fanBit[5]));
SBI(fanState, pgm_read_byte(&fanBit[6]));
#endif
#define _UPDATE_AUTO_FAN(P,D,A) do{ \
if (USEABLE_HARDWARE_PWM(P##_AUTO_FAN_PIN)) \
analogWrite(P##_AUTO_FAN_PIN, A); \
else \
WRITE(P##_AUTO_FAN_PIN, D); \
}while(0)
uint8_t fanDone = 0;
for (uint8_t f = 0; f < COUNT(fanPin); f++) {
const pin_t pin =
#ifdef ARDUINO
pgm_read_byte(&fanPin[f])
#else
fanPin[f]
#endif
;
for (uint8_t f = 0; f < COUNT(fanBit); f++) {
const uint8_t bit = pgm_read_byte(&fanBit[f]);
if (pin >= 0 && !TEST(fanDone, bit)) {
uint8_t newFanSpeed = TEST(fanState, bit) ? EXTRUDER_AUTO_FAN_SPEED : 0;
#if ENABLED(AUTO_POWER_E_FANS)
autofan_speed[f] = newFanSpeed;
if (TEST(fanDone, bit)) continue;
const bool fan_on = TEST(fanState, bit);
const uint8_t speed = fan_on ? EXTRUDER_AUTO_FAN_SPEED : 0;
#if ENABLED(AUTO_POWER_E_FANS)
autofan_speed[f] = speed;
#endif
switch (f) {
#if HAS_AUTO_FAN_0
case 0: _UPDATE_AUTO_FAN(E0, fan_on, speed); break;
#endif
#if HAS_AUTO_FAN_1
case 1: _UPDATE_AUTO_FAN(E1, fan_on, speed); break;
#endif
#if HAS_AUTO_FAN_2
case 2: _UPDATE_AUTO_FAN(E2, fan_on, speed); break;
#endif
#if HAS_AUTO_FAN_3
case 3: _UPDATE_AUTO_FAN(E3, fan_on, speed); break;
#endif
#if HAS_AUTO_FAN_4
case 4: _UPDATE_AUTO_FAN(E4, fan_on, speed); break;
#endif
#if HAS_AUTO_FAN_5
case 5: _UPDATE_AUTO_FAN(E5, fan_on, speed); break;
#endif
#if HAS_AUTO_CHAMBER_FAN
case 6: _UPDATE_AUTO_FAN(CHAMBER, fan_on, speed); break;
#endif
// this idiom allows both digital and PWM fan outputs (see M42 handling).
digitalWrite(pin, newFanSpeed);
analogWrite(pin, newFanSpeed);
SBI(fanDone, bit);
}
SBI(fanDone, bit);
UNUSED(fan_on); UNUSED(speed);
}
}

8
Marlin/src/sd/Sd2Card.cpp

@ -156,13 +156,13 @@ uint32_t Sd2Card::cardSize() {
}
void Sd2Card::chipDeselect() {
digitalWrite(chipSelectPin_, HIGH);
extDigitalWrite(chipSelectPin_, HIGH);
spiSend(0xFF); // Ensure MISO goes high impedance
}
void Sd2Card::chipSelect() {
spiInit(spiRate_);
digitalWrite(chipSelectPin_, LOW);
extDigitalWrite(chipSelectPin_, LOW);
}
/**
@ -241,8 +241,8 @@ bool Sd2Card::init(const uint8_t sckRateID/*=0*/, const pin_t chipSelectPin/*=SD
#endif
// Set pin modes
digitalWrite(chipSelectPin_, HIGH); // For some CPUs pinMode can write the wrong data so init desired data value first
pinMode(chipSelectPin_, OUTPUT); // Solution for #8746 by @benlye
extDigitalWrite(chipSelectPin_, HIGH); // For some CPUs pinMode can write the wrong data so init desired data value first
pinMode(chipSelectPin_, OUTPUT); // Solution for #8746 by @benlye
spiBegin();
// Set SCK rate for initialization commands

Loading…
Cancel
Save