Marlin 2.0.8.1

Marlin/Configuration.h

@@ -35,7 +35,7 @@
  *
  * Advanced settings can be found in Configuration_adv.h
  */
-#define CONFIGURATION_H_VERSION 020008
+#define CONFIGURATION_H_VERSION 02000801
 
 //===========================================================================
 //============================= Getting Started =============================

Marlin/Configuration_adv.h

@@ -30,7 +30,7 @@
  *
  * Basic settings can be found in Configuration.h
  */
-#define CONFIGURATION_ADV_H_VERSION 020008
+#define CONFIGURATION_ADV_H_VERSION 02000801
 
 //===========================================================================
 //============================= Thermal Settings ============================

Marlin/Version.h

@@ -28,7 +28,7 @@
 /**
  * Marlin release version identifier
  */
-//#define SHORT_BUILD_VERSION "2.0.8"
+//#define SHORT_BUILD_VERSION "2.0.8.1"
 
 /**
  * Verbose version identifier which should contain a reference to the location
@@ -41,7 +41,7 @@
  * here we define this default string as the date where the latest release
  * version was tagged.
  */
-//#define STRING_DISTRIBUTION_DATE "2021-04-30"
+//#define STRING_DISTRIBUTION_DATE "2021-05-15"
 
 /**
  * Defines a generic printer name to be output to the LCD after booting Marlin.

Marlin/src/inc/Version.h

@@ -25,7 +25,7 @@
  * Release version. Leave the Marlin version or apply a custom scheme.
  */
 #ifndef SHORT_BUILD_VERSION
-  #define SHORT_BUILD_VERSION "2.0.8"
+  #define SHORT_BUILD_VERSION "2.0.8.1"
 #endif
 
 /**
@@ -42,7 +42,7 @@
  * version was tagged.
  */
 #ifndef STRING_DISTRIBUTION_DATE
-  #define STRING_DISTRIBUTION_DATE "2021-04-29"
+  #define STRING_DISTRIBUTION_DATE "2021-05-15"
 #endif
 
 /**
@@ -52,7 +52,7 @@
  * to alert users to major changes.
  */
 
-#define MARLIN_HEX_VERSION 020008
+#define MARLIN_HEX_VERSION 02000801
 #ifndef REQUIRED_CONFIGURATION_H_VERSION
   #define REQUIRED_CONFIGURATION_H_VERSION MARLIN_HEX_VERSION
 #endif

README.md

@@ -30,6 +30,7 @@ To build Marlin 2.0 you'll need [Arduino IDE 1.8.8 or newer](https://www.arduino
   [Arduino AVR](https://www.arduino.cc/)|ATmega|RAMPS, Melzi, RAMBo
   [Teensy++ 2.0](http://www.microchip.com/wwwproducts/en/AT90USB1286)|AT90USB1286|Printrboard
   [Arduino Due](https://www.arduino.cc/en/Guide/ArduinoDue)|SAM3X8E|RAMPS-FD, RADDS, RAMPS4DUE
+  [ESP32](https://github.com/espressif/arduino-esp32)|ESP32|FYSETC E4, E4d@BOX, MRR
   [LPC1768](http://www.nxp.com/products/microcontrollers-and-processors/arm-based-processors-and-mcus/lpc-cortex-m-mcus/lpc1700-cortex-m3/512kb-flash-64kb-sram-ethernet-usb-lqfp100-package:LPC1768FBD100)|ARM® Cortex-M3|MKS SBASE, Re-ARM, Selena Compact
   [LPC1769](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpc1700-cortex-m3/512kb-flash-64kb-sram-ethernet-usb-lqfp100-package:LPC1769FBD100)|ARM® Cortex-M3|Smoothieboard, Azteeg X5 mini, TH3D EZBoard
   [STM32F103](https://www.st.com/en/microcontrollers-microprocessors/stm32f103.html)|ARM® Cortex-M3|Malyan M200, GTM32 Pro, MKS Robin, BTT SKR Mini
@@ -40,6 +41,7 @@ To build Marlin 2.0 you'll need [Arduino IDE 1.8.8 or newer](https://www.arduino
   [Teensy 3.6](https://www.pjrc.com/store/teensy36.html)|ARM® Cortex-M4|
   [Teensy 4.0](https://www.pjrc.com/store/teensy40.html)|ARM® Cortex-M7|
   [Teensy 4.1](https://www.pjrc.com/store/teensy41.html)|ARM® Cortex-M7|
+  Linux Native|x86/ARM/etc.|Raspberry Pi
 
 ## Submitting Changes
 
@@ -49,7 +51,7 @@ To build Marlin 2.0 you'll need [Arduino IDE 1.8.8 or newer](https://www.arduino
 
 ## Marlin Support
 
-For best results getting help with configuration and troubleshooting, please use the following resources:
+The Issue Queue is reserved for Bug Reports and Feature Requests. To get help with configuration and troubleshooting, please use the following resources:
 
 - [Marlin Documentation](http://marlinfw.org) - Official Marlin documentation
 - [Marlin Discord](https://discord.gg/n5NJ59y) - Discuss issues with Marlin users and developers
@@ -59,13 +61,21 @@ For best results getting help with configuration and troubleshooting, please use
 - Facebook Group ["Marlin Firmware for 3D Printers"](https://www.facebook.com/groups/3Dtechtalk/)
 - [Marlin Configuration](https://www.youtube.com/results?search_query=marlin+configuration) on YouTube
 
-## Credits
+## Contributors
 
-The current Marlin dev team consists of:
+Marlin is constantly improving thanks to a huge number of contributors from all over the world bringing their specialties and talents. Huge thanks are due to [all the contributors](https://github.com/MarlinFirmware/Marlin/graphs/contributors) who regularly patch up bugs, help direct traffic, and basically keep Marlin from falling apart. Marlin's continued existence would not be possible without them.
 
- - Scott Lahteine [[@thinkyhead](https://github.com/thinkyhead)] - USA   [Donate](http://www.thinkyhead.com/donate-to-marlin)
+## Administration
+
+Regular users can open and close their own issues, but only the administrators can do project-related things like add labels, merge changes, set milestones, and kick trolls. The current Marlin admin team consists of:
+
+ - Scott Lahteine [[@thinkyhead](https://github.com/thinkyhead)] - USA - Project Maintainer   [![Donate](https://api.flattr.com/button/flattr-badge-large.png)](http://www.thinkyhead.com/donate-to-marlin)
  - Roxanne Neufeld [[@Roxy-3D](https://github.com/Roxy-3D)] - USA
+ - Keith Bennett [[@thisiskeithb](https://github.com/thisiskeithb)] - USA
+ - Victor Oliveira [[@rhapsodyv](https://github.com/rhapsodyv)] - Brazil
  - Chris Pepper [[@p3p](https://github.com/p3p)] - UK
+ - Jason Smith [[@sjasonsmith](https://github.com/sjasonsmith)] - USA
+ - Luu Lac [[@sjasonsmith](https://github.com/sjasonsmith)] - USA
  - Bob Kuhn [[@Bob-the-Kuhn](https://github.com/Bob-the-Kuhn)] - USA
  - Erik van der Zalm [[@ErikZalm](https://github.com/ErikZalm)] - Netherlands   [![Flattr Erik](https://api.flattr.com/button/flattr-badge-large.png)](https://flattr.com/submit/auto?user_id=ErikZalm&url=https://github.com/MarlinFirmware/Marlin&title=Marlin&language=&tags=github&category=software)