diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 0beb3ef4e5..d06f2cc53c 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index 0beb3ef4e5..d06f2cc53c 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index 1c64ffea50..b39403b644 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index 672bab0cc0..7783316616 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index ca6f419d4f..d304a0cc6d 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h index 9a3b1d744e..4363b13a71 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index 4c54009092..d908190de3 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -727,8 +727,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index a20eaaa7fd..7daa951f4a 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index 7a0009b984..ef75f141d0 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index cf6407890c..a4219dde1c 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index cf6407890c..a4219dde1c 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index c009726f2e..adf5423739 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index 7b75ae1d9a..19a638f211 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index 8da311ef87..8e55b2290a 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Anet/E16/Configuration_adv.h b/config/examples/Anet/E16/Configuration_adv.h index 698aa63f06..ec4f3bcc1a 100644 --- a/config/examples/Anet/E16/Configuration_adv.h +++ b/config/examples/Anet/E16/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index 60ef2b9888..b7209024df 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index 1b284f0d30..938dee2c97 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -730,8 +730,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 17662bbf51..3743e6e8a5 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index 3e3be7f567..af8b336a60 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index 0e49f27e82..639dec6202 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index cdf0ef941f..824c6059b9 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index 0e49f27e82..639dec6202 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index 34edea5127..ac6b302246 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Creality/CR-10/Configuration_adv.h b/config/examples/Creality/CR-10/Configuration_adv.h index f1a347db10..a33448de22 100644 --- a/config/examples/Creality/CR-10/Configuration_adv.h +++ b/config/examples/Creality/CR-10/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Creality/CR-10S/Configuration_adv.h b/config/examples/Creality/CR-10S/Configuration_adv.h index e033545e76..1f3fffd9ad 100644 --- a/config/examples/Creality/CR-10S/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Creality/CR-10_5S/Configuration_adv.h b/config/examples/Creality/CR-10_5S/Configuration_adv.h index f45dc5b33b..063103689b 100644 --- a/config/examples/Creality/CR-10_5S/Configuration_adv.h +++ b/config/examples/Creality/CR-10_5S/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Creality/CR-10mini/Configuration_adv.h b/config/examples/Creality/CR-10mini/Configuration_adv.h index 38c355d518..80ce0971c7 100644 --- a/config/examples/Creality/CR-10mini/Configuration_adv.h +++ b/config/examples/Creality/CR-10mini/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index 6876f0b573..40c008dfb9 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h index 52cf88618f..0ded478add 100644 --- a/config/examples/Creality/CR-20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index 052f0c8f21..c0786a08c5 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index bb9a49696a..0e0328dc06 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Creality/Ender-3/Configuration_adv.h b/config/examples/Creality/Ender-3/Configuration_adv.h index 56d361568a..0fdaf6637f 100644 --- a/config/examples/Creality/Ender-3/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index f69c73f7f8..807b208038 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Creality/Ender-5/Configuration_adv.h b/config/examples/Creality/Ender-5/Configuration_adv.h index 6788703c10..fde1f25ccc 100644 --- a/config/examples/Creality/Ender-5/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index 0d4cf77ddd..760e1f1425 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h index 5d5d623bf5..ac355e2cbd 100755 --- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h +++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index 3c91537cb2..878b43b448 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index 14f2b0f013..b6f39c7601 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h index c974cc3b53..12c5ed1183 100644 --- a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h index c974cc3b53..12c5ed1183 100644 --- a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h index c974cc3b53..12c5ed1183 100644 --- a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h index c974cc3b53..12c5ed1183 100644 --- a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index 35134d5a73..9966b87bf2 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Felix/Configuration_adv.h b/config/examples/Felix/Configuration_adv.h index c59c294078..614d605ebe 100644 --- a/config/examples/Felix/Configuration_adv.h +++ b/config/examples/Felix/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index 67a557cdd7..6b2cdd116c 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index 508f34505e..5effd2008a 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index 3625e2a783..f56014e66a 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index 60aba4326f..e2aefb530a 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -730,8 +730,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index a39b36ce9b..8a022c3cc2 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -730,8 +730,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index 8a0a3e3b7b..7eeec42a73 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h index a371b110ad..b0f08ee6a1 100644 --- a/config/examples/Geeetech/A10M/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index d0361f0c54..352abf998f 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index 1c5bae71d9..11debe0939 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index 8a0a3e3b7b..7eeec42a73 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index 8a0a3e3b7b..7eeec42a73 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index 2afa4fd718..5bec81b1ef 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -718,8 +718,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index 82310c7702..50e2851527 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index c9213cbf00..c09d35acc9 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -731,8 +731,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index c18c3ab726..afd04fc8cb 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index c9213cbf00..c09d35acc9 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -731,8 +731,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index 21bc2c6650..d28b655875 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index a012f59467..6c8854b1df 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index f4b110bfc2..2346d9b0b6 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 287c827b5c..a23d8cfdab 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index d6bd8aac59..493dc21ef5 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index 3f795cb07a..bc1cfb38f9 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index 11a91529f4..bb9d2c4218 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index 2d645457b9..13d112d9c0 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/SCARA/Configuration_adv.h b/config/examples/SCARA/Configuration_adv.h index 95509ab761..555b4f9406 100644 --- a/config/examples/SCARA/Configuration_adv.h +++ b/config/examples/SCARA/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index 14f142e656..aff3643982 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h index cadb58055d..c96c9287b6 100644 --- a/config/examples/Sanguinololu/Configuration_adv.h +++ b/config/examples/Sanguinololu/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index bd76b99570..9de7fa2be9 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h index fd72823bc0..59d171a582 100755 --- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h @@ -722,8 +722,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index 1f69b3a014..d860f44917 100755 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h index 1f69b3a014..d860f44917 100755 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h index f37061fa6f..7271f212a7 100644 --- a/config/examples/TheBorg/Configuration_adv.h +++ b/config/examples/TheBorg/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index e405d0db75..7df8e8728a 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index f97df94237..418e267e2d 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h index b97e94ae83..a4990e913f 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index 3547487345..3a3784145c 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index c59605fb83..84ccae24b4 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index cd0f68acf4..07fc188f69 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index c0c746e120..bc9f4886c1 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -739,8 +739,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Velleman/K8400/Configuration_adv.h b/config/examples/Velleman/K8400/Configuration_adv.h index 9820b7dab2..5d4c64ab2b 100644 --- a/config/examples/Velleman/K8400/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index 051c3fd7bb..2b32e9f16c 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index 59748b34f8..5bfe7b8b81 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index 27ab37cb1e..1691f9e975 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index faf56b6eb6..3a99c5ce9b 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -727,8 +727,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index a7d512daea..61bc4d581d 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -727,8 +727,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index a7d512daea..61bc4d581d 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -727,8 +727,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 7d089829d8..bb264a8a95 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -727,8 +727,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 7d089829d8..bb264a8a95 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -727,8 +727,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 20423cd993..3c6dbf8097 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -727,8 +727,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index 2c461a62ef..0b4f164c1d 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -727,8 +727,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index a52ec2cb12..88e06eb1de 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -727,8 +727,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index 17c94c06c1..4d8b50391b 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -727,8 +727,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index 20423cd993..3c6dbf8097 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -727,8 +727,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h index 20423cd993..3c6dbf8097 100644 --- a/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/kossel_mini/Configuration_adv.h @@ -727,8 +727,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index f746023369..cad45802d4 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -727,8 +727,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index dc7a8af383..85cf6c523f 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index f3941d65bf..3737d8c93d 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index c38546fd71..c593516555 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable. diff --git a/config/examples/wt150/Configuration_adv.h b/config/examples/wt150/Configuration_adv.h index d2d8e95754..d38f743c3e 100644 --- a/config/examples/wt150/Configuration_adv.h +++ b/config/examples/wt150/Configuration_adv.h @@ -726,8 +726,8 @@ //#define CALIBRATION_REPORTING // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm // Comment out any sides which are unreachable by the probe. For best // auto-calibration results, all sides must be reachable.