Browse Source

Move macros to stepper/indirection

pull/1/head
Scott Lahteine 5 years ago
parent
commit
1bb1ce7475
  1. 244
      Marlin/src/MarlinCore.h
  2. 257
      Marlin/src/module/stepper/indirection.h

244
Marlin/src/MarlinCore.h

@ -46,250 +46,6 @@ void idle(
void manage_inactivity(const bool ignore_stepper_queue=false); void manage_inactivity(const bool ignore_stepper_queue=false);
//
// X, Y, Z Stepper enable / disable
//
#if AXIS_IS_L64XX(X)
#define X_enable() NOOP
#define X_disable() stepperX.free()
#elif HAS_X_ENABLE
#define X_enable() X_ENABLE_WRITE( X_ENABLE_ON)
#define X_disable() X_ENABLE_WRITE(!X_ENABLE_ON)
#else
#define X_enable() NOOP
#define X_disable() NOOP
#endif
#if AXIS_IS_L64XX(X2)
#define X2_enable() NOOP
#define X2_disable() stepperX2.free()
#elif HAS_X2_ENABLE
#define X2_enable() X2_ENABLE_WRITE( X_ENABLE_ON)
#define X2_disable() X2_ENABLE_WRITE(!X_ENABLE_ON)
#else
#define X2_enable() NOOP
#define X2_disable() NOOP
#endif
#define enable_X() do{ X_enable(); X2_enable(); }while(0)
#define disable_X() do{ X_disable(); X2_disable(); CBI(axis_known_position, X_AXIS); }while(0)
#if AXIS_IS_L64XX(Y)
#define Y_enable() NOOP
#define Y_disable() stepperY.free()
#elif HAS_Y_ENABLE
#define Y_enable() Y_ENABLE_WRITE( Y_ENABLE_ON)
#define Y_disable() Y_ENABLE_WRITE(!Y_ENABLE_ON)
#else
#define Y_enable() NOOP
#define Y_disable() NOOP
#endif
#if AXIS_IS_L64XX(Y2)
#define Y2_enable() NOOP
#define Y2_disable() stepperY2.free()
#elif HAS_Y2_ENABLE
#define Y2_enable() Y2_ENABLE_WRITE( Y_ENABLE_ON)
#define Y2_disable() Y2_ENABLE_WRITE(!Y_ENABLE_ON)
#else
#define Y2_enable() NOOP
#define Y2_disable() NOOP
#endif
#define enable_Y() do{ Y_enable(); Y2_enable(); }while(0)
#define disable_Y() do{ Y_disable(); Y2_disable(); CBI(axis_known_position, Y_AXIS); }while(0)
#if AXIS_IS_L64XX(Z)
#define Z_enable() NOOP
#define Z_disable() stepperZ.free()
#elif HAS_Z_ENABLE
#define Z_enable() Z_ENABLE_WRITE( Z_ENABLE_ON)
#define Z_disable() Z_ENABLE_WRITE(!Z_ENABLE_ON)
#else
#define Z_enable() NOOP
#define Z_disable() NOOP
#endif
#if AXIS_IS_L64XX(Z2)
#define Z2_enable() NOOP
#define Z2_disable() stepperZ2.free()
#elif HAS_Z2_ENABLE
#define Z2_enable() Z2_ENABLE_WRITE( Z_ENABLE_ON)
#define Z2_disable() Z2_ENABLE_WRITE(!Z_ENABLE_ON)
#else
#define Z2_enable() NOOP
#define Z2_disable() NOOP
#endif
#if AXIS_IS_L64XX(Z3)
#define Z3_enable() NOOP
#define Z3_disable() stepperZ3.free()
#elif HAS_Z3_ENABLE
#define Z3_enable() Z3_ENABLE_WRITE( Z_ENABLE_ON)
#define Z3_disable() Z3_ENABLE_WRITE(!Z_ENABLE_ON)
#else
#define Z3_enable() NOOP
#define Z3_disable() NOOP
#endif
#define enable_Z() do{ Z_enable(); Z2_enable(); Z3_enable(); }while(0)
#define disable_Z() do{ Z_disable(); Z2_disable(); Z3_disable(); CBI(axis_known_position, Z_AXIS); }while(0)
//
// Extruder Stepper enable / disable
//
// define the individual enables/disables
#if AXIS_IS_L64XX(E0)
#define E0_enable() NOOP
#define E0_disable() do{ stepperE0.free(); CBI(axis_known_position, E_AXIS); }while(0)
#elif HAS_E0_ENABLE
#define E0_enable() E0_ENABLE_WRITE( E_ENABLE_ON)
#define E0_disable() E0_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define E0_enable() NOOP
#define E0_disable() NOOP
#endif
#if AXIS_IS_L64XX(E1)
#define E1_enable() NOOP
#define E1_disable() do{ stepperE1.free(); CBI(axis_known_position, E_AXIS); }while(0)
#elif E_STEPPERS > 1 && HAS_E1_ENABLE
#define E1_enable() E1_ENABLE_WRITE( E_ENABLE_ON)
#define E1_disable() E1_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define E1_enable() NOOP
#define E1_disable() NOOP
#endif
#if AXIS_IS_L64XX(E2)
#define E2_enable() NOOP
#define E2_disable() do{ stepperE2.free(); CBI(axis_known_position, E_AXIS); }while(0)
#elif E_STEPPERS > 2 && HAS_E2_ENABLE
#define E2_enable() E2_ENABLE_WRITE( E_ENABLE_ON)
#define E2_disable() E2_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define E2_enable() NOOP
#define E2_disable() NOOP
#endif
#if AXIS_IS_L64XX(E3)
#define E3_enable() NOOP
#define E3_disable() do{ stepperE3.free(); CBI(axis_known_position, E_AXIS); }while(0)
#elif E_STEPPERS > 3 && HAS_E3_ENABLE
#define E3_enable() E3_ENABLE_WRITE( E_ENABLE_ON)
#define E3_disable() E3_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define E3_enable() NOOP
#define E3_disable() NOOP
#endif
#if AXIS_IS_L64XX(E4)
#define E4_enable() NOOP
#define E4_disable() do{ stepperE4.free(); CBI(axis_known_position, E_AXIS); }while(0)
#elif E_STEPPERS > 4 && HAS_E4_ENABLE
#define E4_enable() E4_ENABLE_WRITE( E_ENABLE_ON)
#define E4_disable() E4_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define E4_enable() NOOP
#define E4_disable() NOOP
#endif
#if AXIS_IS_L64XX(E5)
#define E5_enable() NOOP
#define E5_disable() do{ stepperE5.free(); CBI(axis_known_position, E_AXIS); }while(0)
#elif E_STEPPERS > 5 && HAS_E5_ENABLE
#define E5_enable() E5_ENABLE_WRITE( E_ENABLE_ON)
#define E5_disable() E5_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define E5_enable() NOOP
#define E5_disable() NOOP
#endif
#if ENABLED(MIXING_EXTRUDER)
/**
* Mixing steppers synchronize their enable (and direction) together
*/
#if MIXING_STEPPERS > 5
#define enable_E0() { E0_enable(); E1_enable(); E2_enable(); E3_enable(); E4_enable(); E5_enable(); }
#define disable_E0() { E0_disable(); E1_disable(); E2_disable(); E3_disable(); E4_disable(); E5_disable(); }
#elif MIXING_STEPPERS > 4
#define enable_E0() { E0_enable(); E1_enable(); E2_enable(); E3_enable(); E4_enable(); }
#define disable_E0() { E0_disable(); E1_disable(); E2_disable(); E3_disable(); E4_disable(); }
#elif MIXING_STEPPERS > 3
#define enable_E0() { E0_enable(); E1_enable(); E2_enable(); E3_enable(); }
#define disable_E0() { E0_disable(); E1_disable(); E2_disable(); E3_disable(); }
#elif MIXING_STEPPERS > 2
#define enable_E0() { E0_enable(); E1_enable(); E2_enable(); }
#define disable_E0() { E0_disable(); E1_disable(); E2_disable(); }
#else
#define enable_E0() { E0_enable(); E1_enable(); }
#define disable_E0() { E0_disable(); E1_disable(); }
#endif
#define enable_E1() NOOP
#define disable_E1() NOOP
#define enable_E2() NOOP
#define disable_E2() NOOP
#define enable_E3() NOOP
#define disable_E3() NOOP
#define enable_E4() NOOP
#define disable_E4() NOOP
#define enable_E5() NOOP
#define disable_E5() NOOP
#else // !MIXING_EXTRUDER
#if (HAS_E0_ENABLE || AXIS_IS_L64XX(E0))
#define enable_E0() E0_enable()
#define disable_E0() E0_disable()
#else
#define enable_E0() NOOP
#define disable_E0() NOOP
#endif
#if E_STEPPERS > 1 && (HAS_E1_ENABLE || AXIS_IS_L64XX(E1))
#define enable_E1() E1_enable()
#define disable_E1() E1_disable()
#else
#define enable_E1() NOOP
#define disable_E1() NOOP
#endif
#if E_STEPPERS > 2 && (HAS_E2_ENABLE || AXIS_IS_L64XX(E2))
#define enable_E2() E2_enable()
#define disable_E2() E2_disable()
#else
#define enable_E2() NOOP
#define disable_E2() NOOP
#endif
#if E_STEPPERS > 3 && (HAS_E3_ENABLE || AXIS_IS_L64XX(E3))
#define enable_E3() E3_enable()
#define disable_E3() E3_disable()
#else
#define enable_E3() NOOP
#define disable_E3() NOOP
#endif
#if E_STEPPERS > 4 && (HAS_E4_ENABLE || AXIS_IS_L64XX(E4))
#define enable_E4() E4_enable()
#define disable_E4() E4_disable()
#else
#define enable_E4() NOOP
#define disable_E4() NOOP
#endif
#if E_STEPPERS > 5 && (HAS_E5_ENABLE || AXIS_IS_L64XX(E5))
#define enable_E5() E5_enable()
#define disable_E5() E5_disable()
#else
#define enable_E5() NOOP
#define disable_E5() NOOP
#endif
#endif // !MIXING_EXTRUDER
#if ENABLED(EXPERIMENTAL_I2CBUS) #if ENABLED(EXPERIMENTAL_I2CBUS)
#include "feature/twibus.h" #include "feature/twibus.h"
extern TWIBus i2c; extern TWIBus i2c;

257
Marlin/src/module/stepper/indirection.h

@ -397,3 +397,260 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define REV_E_DIR(E) NOOP #define REV_E_DIR(E) NOOP
#endif #endif
//
// X, Y, Z Stepper enable / disable
//
#if AXIS_DRIVER_TYPE_X(L6470)
extern L6470 stepperX;
#define X_enable() NOOP
#define X_disable() stepperX.free()
#elif HAS_X_ENABLE
#define X_enable() X_ENABLE_WRITE( X_ENABLE_ON)
#define X_disable() X_ENABLE_WRITE(!X_ENABLE_ON)
#else
#define X_enable() NOOP
#define X_disable() NOOP
#endif
#if AXIS_DRIVER_TYPE_X2(L6470)
extern L6470 stepperX2;
#define X2_enable() NOOP
#define X2_disable() stepperX2.free()
#elif HAS_X2_ENABLE
#define X2_enable() X2_ENABLE_WRITE( X_ENABLE_ON)
#define X2_disable() X2_ENABLE_WRITE(!X_ENABLE_ON)
#else
#define X2_enable() NOOP
#define X2_disable() NOOP
#endif
#define enable_X() do{ X_enable(); X2_enable(); }while(0)
#define disable_X() do{ X_disable(); X2_disable(); CBI(axis_known_position, X_AXIS); }while(0)
#if AXIS_DRIVER_TYPE_Y(L6470)
extern L6470 stepperY;
#define Y_enable() NOOP
#define Y_disable() stepperY.free()
#elif HAS_Y_ENABLE
#define Y_enable() Y_ENABLE_WRITE( Y_ENABLE_ON)
#define Y_disable() Y_ENABLE_WRITE(!Y_ENABLE_ON)
#else
#define Y_enable() NOOP
#define Y_disable() NOOP
#endif
#if AXIS_DRIVER_TYPE_Y2(L6470)
extern L6470 stepperY2;
#define Y2_enable() NOOP
#define Y2_disable() stepperY2.free()
#elif HAS_Y2_ENABLE
#define Y2_enable() Y2_ENABLE_WRITE( Y_ENABLE_ON)
#define Y2_disable() Y2_ENABLE_WRITE(!Y_ENABLE_ON)
#else
#define Y2_enable() NOOP
#define Y2_disable() NOOP
#endif
#define enable_Y() do{ Y_enable(); Y2_enable(); }while(0)
#define disable_Y() do{ Y_disable(); Y2_disable(); CBI(axis_known_position, Y_AXIS); }while(0)
#if AXIS_DRIVER_TYPE_Z(L6470)
extern L6470 stepperZ;
#define Z_enable() NOOP
#define Z_disable() stepperZ.free()
#elif HAS_Z_ENABLE
#define Z_enable() Z_ENABLE_WRITE( Z_ENABLE_ON)
#define Z_disable() Z_ENABLE_WRITE(!Z_ENABLE_ON)
#else
#define Z_enable() NOOP
#define Z_disable() NOOP
#endif
#if AXIS_DRIVER_TYPE_Z2(L6470)
extern L6470 stepperZ2;
#define Z2_enable() NOOP
#define Z2_disable() stepperZ2.free()
#elif HAS_Z2_ENABLE
#define Z2_enable() Z2_ENABLE_WRITE( Z_ENABLE_ON)
#define Z2_disable() Z2_ENABLE_WRITE(!Z_ENABLE_ON)
#else
#define Z2_enable() NOOP
#define Z2_disable() NOOP
#endif
#if AXIS_DRIVER_TYPE_Z3(L6470)
extern L6470 stepperZ3;
#define Z3_enable() NOOP
#define Z3_disable() stepperZ3.free()
#elif HAS_Z3_ENABLE
#define Z3_enable() Z3_ENABLE_WRITE( Z_ENABLE_ON)
#define Z3_disable() Z3_ENABLE_WRITE(!Z_ENABLE_ON)
#else
#define Z3_enable() NOOP
#define Z3_disable() NOOP
#endif
#define enable_Z() do{ Z_enable(); Z2_enable(); Z3_enable(); }while(0)
#define disable_Z() do{ Z_disable(); Z2_disable(); Z3_disable(); CBI(axis_known_position, Z_AXIS); }while(0)
//
// Extruder Stepper enable / disable
//
// define the individual enables/disables
#if AXIS_DRIVER_TYPE_E0(L6470)
extern L6470 stepperE0;
#define E0_enable() NOOP
#define E0_disable() do{ stepperE0.free(); CBI(axis_known_position, E_AXIS); }while(0)
#elif HAS_E0_ENABLE
#define E0_enable() E0_ENABLE_WRITE( E_ENABLE_ON)
#define E0_disable() E0_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define E0_enable() NOOP
#define E0_disable() NOOP
#endif
#if AXIS_DRIVER_TYPE_E1(L6470)
extern L6470 stepperE1;
#define E1_enable() NOOP
#define E1_disable() do{ stepperE1.free(); CBI(axis_known_position, E_AXIS); }while(0)
#elif E_STEPPERS > 1 && HAS_E1_ENABLE
#define E1_enable() E1_ENABLE_WRITE( E_ENABLE_ON)
#define E1_disable() E1_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define E1_enable() NOOP
#define E1_disable() NOOP
#endif
#if AXIS_DRIVER_TYPE_E2(L6470)
extern L6470 stepperE2;
#define E2_enable() NOOP
#define E2_disable() do{ stepperE2.free(); CBI(axis_known_position, E_AXIS); }while(0)
#elif E_STEPPERS > 2 && HAS_E2_ENABLE
#define E2_enable() E2_ENABLE_WRITE( E_ENABLE_ON)
#define E2_disable() E2_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define E2_enable() NOOP
#define E2_disable() NOOP
#endif
#if AXIS_DRIVER_TYPE_E3(L6470)
extern L6470 stepperE3;
#define E3_enable() NOOP
#define E3_disable() do{ stepperE3.free(); CBI(axis_known_position, E_AXIS); }while(0)
#elif E_STEPPERS > 3 && HAS_E3_ENABLE
#define E3_enable() E3_ENABLE_WRITE( E_ENABLE_ON)
#define E3_disable() E3_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define E3_enable() NOOP
#define E3_disable() NOOP
#endif
#if AXIS_DRIVER_TYPE_E4(L6470)
extern L6470 stepperE4;
#define E4_enable() NOOP
#define E4_disable() do{ stepperE4.free(); CBI(axis_known_position, E_AXIS); }while(0)
#elif E_STEPPERS > 4 && HAS_E4_ENABLE
#define E4_enable() E4_ENABLE_WRITE( E_ENABLE_ON)
#define E4_disable() E4_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define E4_enable() NOOP
#define E4_disable() NOOP
#endif
#if AXIS_DRIVER_TYPE_E5(L6470)
extern L6470 stepperE5;
#define E5_enable() NOOP
#define E5_disable() do{ stepperE5.free(); CBI(axis_known_position, E_AXIS); }while(0)
#elif E_STEPPERS > 5 && HAS_E5_ENABLE
#define E5_enable() E5_ENABLE_WRITE( E_ENABLE_ON)
#define E5_disable() E5_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define E5_enable() NOOP
#define E5_disable() NOOP
#endif
#if ENABLED(MIXING_EXTRUDER)
/**
* Mixing steppers synchronize their enable (and direction) together
*/
#if MIXING_STEPPERS > 5
#define enable_E0() { E0_enable(); E1_enable(); E2_enable(); E3_enable(); E4_enable(); E5_enable(); }
#define disable_E0() { E0_disable(); E1_disable(); E2_disable(); E3_disable(); E4_disable(); E5_disable(); }
#elif MIXING_STEPPERS > 4
#define enable_E0() { E0_enable(); E1_enable(); E2_enable(); E3_enable(); E4_enable(); }
#define disable_E0() { E0_disable(); E1_disable(); E2_disable(); E3_disable(); E4_disable(); }
#elif MIXING_STEPPERS > 3
#define enable_E0() { E0_enable(); E1_enable(); E2_enable(); E3_enable(); }
#define disable_E0() { E0_disable(); E1_disable(); E2_disable(); E3_disable(); }
#elif MIXING_STEPPERS > 2
#define enable_E0() { E0_enable(); E1_enable(); E2_enable(); }
#define disable_E0() { E0_disable(); E1_disable(); E2_disable(); }
#else
#define enable_E0() { E0_enable(); E1_enable(); }
#define disable_E0() { E0_disable(); E1_disable(); }
#endif
#define enable_E1() NOOP
#define disable_E1() NOOP
#define enable_E2() NOOP
#define disable_E2() NOOP
#define enable_E3() NOOP
#define disable_E3() NOOP
#define enable_E4() NOOP
#define disable_E4() NOOP
#define enable_E5() NOOP
#define disable_E5() NOOP
#else // !MIXING_EXTRUDER
#if HAS_E0_ENABLE
#define enable_E0() E0_enable()
#define disable_E0() E0_disable()
#else
#define enable_E0() NOOP
#define disable_E0() NOOP
#endif
#if E_STEPPERS > 1 && HAS_E1_ENABLE
#define enable_E1() E1_enable()
#define disable_E1() E1_disable()
#else
#define enable_E1() NOOP
#define disable_E1() NOOP
#endif
#if E_STEPPERS > 2 && HAS_E2_ENABLE
#define enable_E2() E2_enable()
#define disable_E2() E2_disable()
#else
#define enable_E2() NOOP
#define disable_E2() NOOP
#endif
#if E_STEPPERS > 3 && HAS_E3_ENABLE
#define enable_E3() E3_enable()
#define disable_E3() E3_disable()
#else
#define enable_E3() NOOP
#define disable_E3() NOOP
#endif
#if E_STEPPERS > 4 && HAS_E4_ENABLE
#define enable_E4() E4_enable()
#define disable_E4() E4_disable()
#else
#define enable_E4() NOOP
#define disable_E4() NOOP
#endif
#if E_STEPPERS > 5 && HAS_E5_ENABLE
#define enable_E5() E5_enable()
#define disable_E5() E5_disable()
#else
#define enable_E5() NOOP
#define disable_E5() NOOP
#endif
#endif // !MIXING_EXTRUDER

Loading…
Cancel
Save