From 1b7356b3a19337d1bd2bb199e57cf3dc7d270558 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sat, 9 Apr 2016 19:20:12 -0700 Subject: [PATCH] Account for home_offset in G29 handler --- Marlin/Marlin_main.cpp | 43 +++++++++++++++++++++++++----------------- Marlin/planner.cpp | 4 ++-- 2 files changed, 28 insertions(+), 19 deletions(-) diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index ee8693955f..af0cbe72ca 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -2841,7 +2841,7 @@ inline void gcode_G28() { } if (probe_point == 0) { // Set Z to a positive value before recording the first Z. - current_position[Z_AXIS] = MESH_HOME_SEARCH_Z; + current_position[Z_AXIS] = MESH_HOME_SEARCH_Z + home_offset[Z_AXIS]; sync_plan_position(); } else { @@ -2850,7 +2850,7 @@ inline void gcode_G28() { iy = (probe_point - 1) / (MESH_NUM_X_POINTS); if (iy & 1) ix = (MESH_NUM_X_POINTS - 1) - ix; // zig-zag mbl.set_z(ix, iy, current_position[Z_AXIS]); - current_position[Z_AXIS] = MESH_HOME_SEARCH_Z; + current_position[Z_AXIS] = MESH_HOME_SEARCH_Z + home_offset[Z_AXIS]; plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], homing_feedrate[X_AXIS] / 60, active_extruder); st_synchronize(); } @@ -2859,8 +2859,8 @@ inline void gcode_G28() { ix = probe_point % (MESH_NUM_X_POINTS); iy = probe_point / (MESH_NUM_X_POINTS); if (iy & 1) ix = (MESH_NUM_X_POINTS - 1) - ix; // zig-zag - current_position[X_AXIS] = mbl.get_x(ix); - current_position[Y_AXIS] = mbl.get_y(iy); + current_position[X_AXIS] = mbl.get_x(ix) + home_offset[X_AXIS]; + current_position[Y_AXIS] = mbl.get_y(iy) + home_offset[Y_AXIS]; plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], homing_feedrate[X_AXIS] / 60, active_extruder); st_synchronize(); probe_point++; @@ -3144,7 +3144,7 @@ inline void gcode_G28() { // raise extruder float measured_z, - z_before = probePointCounter ? Z_RAISE_BETWEEN_PROBINGS + current_position[Z_AXIS] : Z_RAISE_BEFORE_PROBING; + z_before = probePointCounter ? Z_RAISE_BETWEEN_PROBINGS + current_position[Z_AXIS] : Z_RAISE_BEFORE_PROBING + home_offset[Z_AXIS]; if (probePointCounter) { #if ENABLED(DEBUG_LEVELING_FEATURE) @@ -3157,7 +3157,7 @@ inline void gcode_G28() { else { #if ENABLED(DEBUG_LEVELING_FEATURE) if (DEBUGGING(LEVELING)) { - SERIAL_ECHOPAIR("z_before = (before) ", Z_RAISE_BEFORE_PROBING); + SERIAL_ECHOPAIR("z_before = (before) ", Z_RAISE_BEFORE_PROBING + home_offset[Z_AXIS]); SERIAL_EOL; } #endif @@ -3318,9 +3318,18 @@ inline void gcode_G28() { p1 = ProbeDeploy, p2 = ProbeStay, p3 = ProbeStow; // Probe at 3 arbitrary points - float z_at_pt_1 = probe_pt(ABL_PROBE_PT_1_X, ABL_PROBE_PT_1_Y, Z_RAISE_BEFORE_PROBING, p1, verbose_level), - z_at_pt_2 = probe_pt(ABL_PROBE_PT_2_X, ABL_PROBE_PT_2_Y, current_position[Z_AXIS] + Z_RAISE_BETWEEN_PROBINGS, p2, verbose_level), - z_at_pt_3 = probe_pt(ABL_PROBE_PT_3_X, ABL_PROBE_PT_3_Y, current_position[Z_AXIS] + Z_RAISE_BETWEEN_PROBINGS, p3, verbose_level); + float z_at_pt_1 = probe_pt( ABL_PROBE_PT_1_X + home_offset[X_AXIS], + ABL_PROBE_PT_1_Y + home_offset[Y_AXIS], + Z_RAISE_BEFORE_PROBING + home_offset[Z_AXIS], + p1, verbose_level), + z_at_pt_2 = probe_pt( ABL_PROBE_PT_2_X + home_offset[X_AXIS], + ABL_PROBE_PT_2_Y + home_offset[Y_AXIS], + current_position[Z_AXIS] + Z_RAISE_BETWEEN_PROBINGS, + p2, verbose_level), + z_at_pt_3 = probe_pt( ABL_PROBE_PT_3_X + home_offset[X_AXIS], + ABL_PROBE_PT_3_Y + home_offset[Y_AXIS], + current_position[Z_AXIS] + Z_RAISE_BETWEEN_PROBINGS, + p3, verbose_level); clean_up_after_endstop_move(); if (!dryrun) set_bed_level_equation_3pts(z_at_pt_1, z_at_pt_2, z_at_pt_3); @@ -6962,10 +6971,10 @@ void mesh_plan_buffer_line(float x, float y, float z, const float e, float feed_ set_current_to_destination(); return; } - int pix = mbl.select_x_index(current_position[X_AXIS]); - int piy = mbl.select_y_index(current_position[Y_AXIS]); - int ix = mbl.select_x_index(x); - int iy = mbl.select_y_index(y); + int pix = mbl.select_x_index(current_position[X_AXIS] - home_offset[X_AXIS]); + int piy = mbl.select_y_index(current_position[Y_AXIS] - home_offset[Y_AXIS]); + int ix = mbl.select_x_index(x - home_offset[X_AXIS]); + int iy = mbl.select_y_index(y - home_offset[Y_AXIS]); pix = min(pix, MESH_NUM_X_POINTS - 2); piy = min(piy, MESH_NUM_Y_POINTS - 2); ix = min(ix, MESH_NUM_X_POINTS - 2); @@ -6978,7 +6987,7 @@ void mesh_plan_buffer_line(float x, float y, float z, const float e, float feed_ } float nx, ny, nz, ne, normalized_dist; if (ix > pix && TEST(x_splits, ix)) { - nx = mbl.get_x(ix); + nx = mbl.get_x(ix) + home_offset[X_AXIS]; normalized_dist = (nx - current_position[X_AXIS]) / (x - current_position[X_AXIS]); ny = current_position[Y_AXIS] + (y - current_position[Y_AXIS]) * normalized_dist; nz = current_position[Z_AXIS] + (z - current_position[Z_AXIS]) * normalized_dist; @@ -6986,7 +6995,7 @@ void mesh_plan_buffer_line(float x, float y, float z, const float e, float feed_ CBI(x_splits, ix); } else if (ix < pix && TEST(x_splits, pix)) { - nx = mbl.get_x(pix); + nx = mbl.get_x(pix) + home_offset[X_AXIS]; normalized_dist = (nx - current_position[X_AXIS]) / (x - current_position[X_AXIS]); ny = current_position[Y_AXIS] + (y - current_position[Y_AXIS]) * normalized_dist; nz = current_position[Z_AXIS] + (z - current_position[Z_AXIS]) * normalized_dist; @@ -6994,7 +7003,7 @@ void mesh_plan_buffer_line(float x, float y, float z, const float e, float feed_ CBI(x_splits, pix); } else if (iy > piy && TEST(y_splits, iy)) { - ny = mbl.get_y(iy); + ny = mbl.get_y(iy) + home_offset[Y_AXIS]; normalized_dist = (ny - current_position[Y_AXIS]) / (y - current_position[Y_AXIS]); nx = current_position[X_AXIS] + (x - current_position[X_AXIS]) * normalized_dist; nz = current_position[Z_AXIS] + (z - current_position[Z_AXIS]) * normalized_dist; @@ -7002,7 +7011,7 @@ void mesh_plan_buffer_line(float x, float y, float z, const float e, float feed_ CBI(y_splits, iy); } else if (iy < piy && TEST(y_splits, piy)) { - ny = mbl.get_y(piy); + ny = mbl.get_y(piy) + home_offset[Y_AXIS]; normalized_dist = (ny - current_position[Y_AXIS]) / (y - current_position[Y_AXIS]); nx = current_position[X_AXIS] + (x - current_position[X_AXIS]) * normalized_dist; nz = current_position[Z_AXIS] + (z - current_position[Z_AXIS]) * normalized_dist; diff --git a/Marlin/planner.cpp b/Marlin/planner.cpp index 318b5bdb28..97468f0885 100644 --- a/Marlin/planner.cpp +++ b/Marlin/planner.cpp @@ -568,7 +568,7 @@ float junction_deviation = 0.1; while (block_buffer_tail == next_buffer_head) idle(); #if ENABLED(MESH_BED_LEVELING) - if (mbl.active) z += mbl.get_z(x, y); + if (mbl.active) z += mbl.get_z(x - home_offset[X_AXIS], y - home_offset[Y_AXIS]); #elif ENABLED(AUTO_BED_LEVELING_FEATURE) apply_rotation_xyz(plan_bed_level_matrix, x, y, z); #endif @@ -1111,7 +1111,7 @@ float junction_deviation = 0.1; #endif // AUTO_BED_LEVELING_FEATURE || MESH_BED_LEVELING { #if ENABLED(MESH_BED_LEVELING) - if (mbl.active) z += mbl.get_z(x, y); + if (mbl.active) z += mbl.get_z(x - home_offset[X_AXIS], y - home_offset[Y_AXIS]); #elif ENABLED(AUTO_BED_LEVELING_FEATURE) apply_rotation_xyz(plan_bed_level_matrix, x, y, z); #endif