From 1affbe2100c32f79d469b059be3eddd364a80431 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Fri, 12 Mar 2021 06:54:42 -0600 Subject: [PATCH] Clean up, optimize ExtUI/TFT code (#21333) --- Marlin/src/feature/bedlevel/bedlevel.cpp | 2 +- Marlin/src/feature/bedlevel/bedlevel.h | 2 +- Marlin/src/lcd/extui/anycubic_chiron_lcd.cpp | 8 +- Marlin/src/lcd/extui/anycubic_i3mega_lcd.cpp | 6 +- Marlin/src/lcd/extui/dgus_lcd.cpp | 10 +- Marlin/src/lcd/extui/example.cpp | 8 +- .../lib/anycubic_chiron/FileNavigator.cpp | 2 +- .../extui/lib/anycubic_chiron/chiron_tft.cpp | 5 +- .../extui/lib/anycubic_chiron/chiron_tft.h | 67 ++--- .../lib/anycubic_chiron/chiron_tft_defs.h | 4 +- .../anycubic_i3mega/anycubic_i3mega_lcd.cpp | 236 +++++++++--------- .../lib/anycubic_i3mega/anycubic_i3mega_lcd.h | 78 +++--- .../lib/ftdi_eve_touch_ui/marlin_events.cpp | 2 +- .../screens/bed_mesh_screen.h | 2 +- .../screens/stress_test_screen.cpp | 4 +- .../screens/temperature_screen.cpp | 7 +- Marlin/src/lcd/extui/malyan_lcd.cpp | 2 +- Marlin/src/lcd/extui/ui_api.cpp | 135 +++++----- Marlin/src/lcd/extui/ui_api.h | 73 +++--- Marlin/src/sd/cardreader.h | 2 - 20 files changed, 321 insertions(+), 334 deletions(-) diff --git a/Marlin/src/feature/bedlevel/bedlevel.cpp b/Marlin/src/feature/bedlevel/bedlevel.cpp index 2ad4ffecaf..3680fbac05 100644 --- a/Marlin/src/feature/bedlevel/bedlevel.cpp +++ b/Marlin/src/feature/bedlevel/bedlevel.cpp @@ -98,7 +98,7 @@ TemporaryBedLevelingState::TemporaryBedLevelingState(const bool enable) : saved( #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) - void set_z_fade_height(const float zfh, const bool do_report/*=true*/) { + void set_z_fade_height(const float &zfh, const bool do_report/*=true*/) { if (planner.z_fade_height == zfh) return; diff --git a/Marlin/src/feature/bedlevel/bedlevel.h b/Marlin/src/feature/bedlevel/bedlevel.h index a33f08ad0e..3e89a08802 100644 --- a/Marlin/src/feature/bedlevel/bedlevel.h +++ b/Marlin/src/feature/bedlevel/bedlevel.h @@ -38,7 +38,7 @@ void set_bed_leveling_enabled(const bool enable=true); void reset_bed_level(); #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) - void set_z_fade_height(const float zfh, const bool do_report=true); + void set_z_fade_height(const float &zfh, const bool do_report=true); #endif #if EITHER(MESH_BED_LEVELING, PROBE_MANUALLY) diff --git a/Marlin/src/lcd/extui/anycubic_chiron_lcd.cpp b/Marlin/src/lcd/extui/anycubic_chiron_lcd.cpp index 06baa4c19d..a424327b08 100644 --- a/Marlin/src/lcd/extui/anycubic_chiron_lcd.cpp +++ b/Marlin/src/lcd/extui/anycubic_chiron_lcd.cpp @@ -74,7 +74,7 @@ namespace ExtUI { // into buff. // Example: - // static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size); + // static_assert(sizeof(myDataStruct) <= eeprom_data_size); // memcpy(buff, &myDataStruct, sizeof(myDataStruct)); } @@ -84,7 +84,7 @@ namespace ExtUI { // from buff // Example: - // static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size); + // static_assert(sizeof(myDataStruct) <= eeprom_data_size); // memcpy(&myDataStruct, buff, sizeof(myDataStruct)); } @@ -101,12 +101,12 @@ namespace ExtUI { #if HAS_MESH void onMeshLevelingStart() {} - void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float zval) { + void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float &zval) { // Called when any mesh points are updated //SERIAL_ECHOLNPAIR("onMeshUpdate() x:", xpos, " y:", ypos, " z:", zval); } - void onMeshUpdate(const int8_t xpos, const int8_t ypos, const ExtUI::probe_state_t state) { + void onMeshUpdate(const int8_t xpos, const int8_t ypos, const probe_state_t state) { // Called to indicate a special condition //SERIAL_ECHOLNPAIR("onMeshUpdate() x:", xpos, " y:", ypos, " state:", state); } diff --git a/Marlin/src/lcd/extui/anycubic_i3mega_lcd.cpp b/Marlin/src/lcd/extui/anycubic_i3mega_lcd.cpp index e2bd96068c..939199db93 100644 --- a/Marlin/src/lcd/extui/anycubic_i3mega_lcd.cpp +++ b/Marlin/src/lcd/extui/anycubic_i3mega_lcd.cpp @@ -65,7 +65,7 @@ namespace ExtUI { // into buff. // Example: - // static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size); + // static_assert(sizeof(myDataStruct) <= eeprom_data_size); // memcpy(buff, &myDataStruct, sizeof(myDataStruct)); } @@ -75,7 +75,7 @@ namespace ExtUI { // from buff // Example: - // static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size); + // static_assert(sizeof(myDataStruct) <= eeprom_data_size); // memcpy(&myDataStruct, buff, sizeof(myDataStruct)); } @@ -93,7 +93,7 @@ namespace ExtUI { void onMeshLevelingStart() {} - void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float zval) { + void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float &zval) { // Called when any mesh points are updated } #endif diff --git a/Marlin/src/lcd/extui/dgus_lcd.cpp b/Marlin/src/lcd/extui/dgus_lcd.cpp index 9e6ca1b64c..273a8d2d2a 100644 --- a/Marlin/src/lcd/extui/dgus_lcd.cpp +++ b/Marlin/src/lcd/extui/dgus_lcd.cpp @@ -61,7 +61,7 @@ namespace ExtUI { void onUserConfirmRequired(const char * const msg) { if (msg) { ScreenHandler.sendinfoscreen(PSTR("Please confirm."), nullptr, msg, nullptr, true, true, false, true); - ScreenHandler.SetupConfirmAction(ExtUI::setUserConfirmed); + ScreenHandler.SetupConfirmAction(setUserConfirmed); ScreenHandler.GotoScreen(DGUSLCD_SCREEN_POPUP); } else if (ScreenHandler.getCurrentScreen() == DGUSLCD_SCREEN_POPUP ) { @@ -84,7 +84,7 @@ namespace ExtUI { // into buff. // Example: - // static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size); + // static_assert(sizeof(myDataStruct) <= eeprom_data_size); // memcpy(buff, &myDataStruct, sizeof(myDataStruct)); } @@ -94,7 +94,7 @@ namespace ExtUI { // from buff // Example: - // static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size); + // static_assert(sizeof(myDataStruct) <= eeprom_data_size); // memcpy(&myDataStruct, buff, sizeof(myDataStruct)); } @@ -111,11 +111,11 @@ namespace ExtUI { #if HAS_MESH void onMeshLevelingStart() {} - void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float zval) { + void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float &zval) { // Called when any mesh points are updated } - void onMeshUpdate(const int8_t xpos, const int8_t ypos, const ExtUI::probe_state_t state) { + void onMeshUpdate(const int8_t xpos, const int8_t ypos, const probe_state_t state) { // Called to indicate a special condition } #endif diff --git a/Marlin/src/lcd/extui/example.cpp b/Marlin/src/lcd/extui/example.cpp index dd4b3312eb..415d381dd6 100644 --- a/Marlin/src/lcd/extui/example.cpp +++ b/Marlin/src/lcd/extui/example.cpp @@ -70,7 +70,7 @@ namespace ExtUI { // into buff. // Example: - // static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size); + // static_assert(sizeof(myDataStruct) <= eeprom_data_size); // memcpy(buff, &myDataStruct, sizeof(myDataStruct)); } @@ -80,7 +80,7 @@ namespace ExtUI { // from buff // Example: - // static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size); + // static_assert(sizeof(myDataStruct) <= eeprom_data_size); // memcpy(&myDataStruct, buff, sizeof(myDataStruct)); } @@ -97,11 +97,11 @@ namespace ExtUI { #if HAS_MESH void onMeshLevelingStart() {} - void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float zval) { + void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float &zval) { // Called when any mesh points are updated } - void onMeshUpdate(const int8_t xpos, const int8_t ypos, const ExtUI::probe_state_t state) { + void onMeshUpdate(const int8_t xpos, const int8_t ypos, const probe_state_t state) { // Called to indicate a special condition } #endif diff --git a/Marlin/src/lcd/extui/lib/anycubic_chiron/FileNavigator.cpp b/Marlin/src/lcd/extui/lib/anycubic_chiron/FileNavigator.cpp index 7d813a6ab0..25847ae96c 100644 --- a/Marlin/src/lcd/extui/lib/anycubic_chiron/FileNavigator.cpp +++ b/Marlin/src/lcd/extui/lib/anycubic_chiron/FileNavigator.cpp @@ -73,7 +73,7 @@ namespace Anycubic { // Each time we change folder we reset the file index to 0 and keep track // of the current position as the TFT panel isnt aware of folders trees. if (index > 0) { - --currentindex; // go back a file to take account off the .. we added to the root. + --currentindex; // go back a file to take account of the .. added to the root. if (index > lastindex) currentindex += files; else diff --git a/Marlin/src/lcd/extui/lib/anycubic_chiron/chiron_tft.cpp b/Marlin/src/lcd/extui/lib/anycubic_chiron/chiron_tft.cpp index 97149a407e..aa78fcb539 100644 --- a/Marlin/src/lcd/extui/lib/anycubic_chiron/chiron_tft.cpp +++ b/Marlin/src/lcd/extui/lib/anycubic_chiron/chiron_tft.cpp @@ -288,7 +288,7 @@ namespace Anycubic { SERIAL_ECHOLNPGM("Select SD file then press resume"); } - void ChironTFT::SendtoTFT(PGM_P str) { // A helper to print PROGMEN string to the panel + void ChironTFT::SendtoTFT(PGM_P str) { // A helper to print PROGMEM string to the panel #if ACDEBUG(AC_SOME) SERIAL_ECHOPGM_P(str); #endif @@ -880,6 +880,7 @@ namespace Anycubic { } break; } } -} // namespace + +} // Anycubic #endif // ANYCUBIC_LCD_CHIRON diff --git a/Marlin/src/lcd/extui/lib/anycubic_chiron/chiron_tft.h b/Marlin/src/lcd/extui/lib/anycubic_chiron/chiron_tft.h index 267f2fe978..e7bbd3cbbf 100644 --- a/Marlin/src/lcd/extui/lib/anycubic_chiron/chiron_tft.h +++ b/Marlin/src/lcd/extui/lib/anycubic_chiron/chiron_tft.h @@ -32,46 +32,49 @@ #include "chiron_tft_defs.h" #include "../../../../inc/MarlinConfigPre.h" #include "../../ui_api.h" + namespace Anycubic { class ChironTFT { - static printer_state_t printer_state; - static paused_state_t pause_state; - static heater_state_t hotend_state; - static heater_state_t hotbed_state; - static xy_uint8_t selectedmeshpoint; - static char panel_command[MAX_CMND_LEN]; - static uint8_t command_len; - static char selectedfile[MAX_PATH_LEN]; - static float live_Zoffset; - static file_menu_t file_menu; + private: + static printer_state_t printer_state; + static paused_state_t pause_state; + static heater_state_t hotend_state; + static heater_state_t hotbed_state; + static xy_uint8_t selectedmeshpoint; + static char panel_command[MAX_CMND_LEN]; + static uint8_t command_len; + static char selectedfile[MAX_PATH_LEN]; + static float live_Zoffset; + static file_menu_t file_menu; + public: ChironTFT(); - void Startup(); - void IdleLoop(); - void PrinterKilled(PGM_P,PGM_P); - void MediaEvent(media_event_t); - void TimerEvent(timer_event_t); - void FilamentRunout(); - void ConfirmationRequest(const char * const ); - void StatusChange(const char * const ); - void PowerLossRecovery(); + static void Startup(); + static void IdleLoop(); + static void PrinterKilled(PGM_P,PGM_P); + static void MediaEvent(media_event_t); + static void TimerEvent(timer_event_t); + static void FilamentRunout(); + static void ConfirmationRequest(const char * const ); + static void StatusChange(const char * const ); + static void PowerLossRecovery(); private: - void SendtoTFT(PGM_P); - void SendtoTFTLN(PGM_P); - bool ReadTFTCommand(); - int8_t Findcmndpos(const char *, char); - void CheckHeaters(); - void SendFileList(int8_t); - void SelectFile(); - void InjectCommandandWait(PGM_P); - void ProcessPanelRequest(); - void PanelInfo(uint8_t); - void PanelAction(uint8_t); - void PanelProcess(uint8_t); + static void SendtoTFT(PGM_P); + static void SendtoTFTLN(PGM_P); + static bool ReadTFTCommand(); + static int8_t Findcmndpos(const char *, char); + static void CheckHeaters(); + static void SendFileList(int8_t); + static void SelectFile(); + static void InjectCommandandWait(PGM_P); + static void ProcessPanelRequest(); + static void PanelInfo(uint8_t); + static void PanelAction(uint8_t); + static void PanelProcess(uint8_t); }; extern ChironTFT Chiron; -} +} // Anycubic diff --git a/Marlin/src/lcd/extui/lib/anycubic_chiron/chiron_tft_defs.h b/Marlin/src/lcd/extui/lib/anycubic_chiron/chiron_tft_defs.h index 7012e98d92..3087d83801 100644 --- a/Marlin/src/lcd/extui/lib/anycubic_chiron/chiron_tft_defs.h +++ b/Marlin/src/lcd/extui/lib/anycubic_chiron/chiron_tft_defs.h @@ -109,6 +109,7 @@ #define AC_cmnd_power_loss_recovery PSTR("G28XYR5\nG28Z") // Lift, home X and Y then home Z when in 'safe' position namespace Anycubic { + enum heater_state_t : uint8_t { AC_heater_off, AC_heater_temp_set, @@ -148,4 +149,5 @@ namespace Anycubic { AC_menu_change_to_file, AC_menu_change_to_command }; -} + +} // Anycubic diff --git a/Marlin/src/lcd/extui/lib/anycubic_i3mega/anycubic_i3mega_lcd.cpp b/Marlin/src/lcd/extui/lib/anycubic_i3mega/anycubic_i3mega_lcd.cpp index a990c4c640..95b07f5c68 100644 --- a/Marlin/src/lcd/extui/lib/anycubic_i3mega/anycubic_i3mega_lcd.cpp +++ b/Marlin/src/lcd/extui/lib/anycubic_i3mega/anycubic_i3mega_lcd.cpp @@ -2,7 +2,7 @@ * anycubic_i3mega_lcd.cpp --- Support for Anycubic i3 Mega TFT * Created by Christian Hopp on 09.12.17. * Improved by David Ramiro - * Converted to ext_iu by John BouAntoun 21 June 2020 + * Converted to ExtUI by John BouAntoun 21 June 2020 * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public @@ -32,44 +32,46 @@ #include "../../../../inc/MarlinConfig.h" // command sending macro's with debugging capability -#define SEND_PGM(x) send_P(PSTR(x)) -#define SENDLINE_PGM(x) sendLine_P(PSTR(x)) -#define SEND_PGM_VAL(x,y) (send_P(PSTR(x)), sendLine(i16tostr3rj(y))) -#define SEND(x) send(x) -#define SENDLINE(x) sendLine(x) +#define SEND_PGM(x) send_P(PSTR(x)) +#define SENDLINE_PGM(x) sendLine_P(PSTR(x)) +#define SEND_PGM_VAL(x,y) (send_P(PSTR(x)), sendLine(i16tostr3rj(y))) +#define SEND(x) send(x) +#define SENDLINE(x) sendLine(x) #if ENABLED(ANYCUBIC_LCD_DEBUG) - #define SENDLINE_DBG_PGM(x,y) (sendLine_P(PSTR(x)), SERIAL_ECHOLNPGM(y)) - #define SENDLINE_DBG_PGM_VAL(x,y,z) (sendLine_P(PSTR(x)), SERIAL_ECHOPGM(y), SERIAL_ECHOLN(z)) + #define SENDLINE_DBG_PGM(x,y) (sendLine_P(PSTR(x)), SERIAL_ECHOLNPGM(y)) + #define SENDLINE_DBG_PGM_VAL(x,y,z) (sendLine_P(PSTR(x)), SERIAL_ECHOPGM(y), SERIAL_ECHOLN(z)) #else - #define SENDLINE_DBG_PGM(x,y) sendLine_P(PSTR(x)) - #define SENDLINE_DBG_PGM_VAL(x,y,z) sendLine_P(PSTR(x)) + #define SENDLINE_DBG_PGM(x,y) sendLine_P(PSTR(x)) + #define SENDLINE_DBG_PGM_VAL(x,y,z) sendLine_P(PSTR(x)) #endif AnycubicTFTClass AnycubicTFT; -static void sendNewLine(void) { - LCD_SERIAL.write('\r'); - LCD_SERIAL.write('\n'); -} - -static void send(const char *str) { - LCD_SERIAL.print(str); -} - -static void sendLine(const char *str) { - send(str); - sendNewLine(); -} - +char AnycubicTFTClass::TFTcmdbuffer[TFTBUFSIZE][TFT_MAX_CMD_SIZE]; +int AnycubicTFTClass::TFTbuflen = 0, + AnycubicTFTClass::TFTbufindr = 0, + AnycubicTFTClass::TFTbufindw = 0; +char AnycubicTFTClass::serial3_char; +int AnycubicTFTClass::serial3_count = 0; +char* AnycubicTFTClass::TFTstrchr_pointer; +uint8_t AnycubicTFTClass::SpecialMenu = false; +AnycubicMediaPrintState AnycubicTFTClass::mediaPrintingState = AMPRINTSTATE_NOT_PRINTING; +AnycubicMediaPauseState AnycubicTFTClass::mediaPauseState = AMPAUSESTATE_NOT_PAUSED; + +char AnycubicTFTClass::SelectedDirectory[30]; +char AnycubicTFTClass::SelectedFile[FILENAME_LENGTH]; + +// Serial helpers +static void sendNewLine(void) { LCD_SERIAL.write('\r'); LCD_SERIAL.write('\n'); } +static void send(const char *str) { LCD_SERIAL.print(str); } static void send_P(PGM_P str) { while (const char c = pgm_read_byte(str++)) LCD_SERIAL.write(c); } +static void sendLine(const char *str) { send(str); sendNewLine(); } +static void sendLine_P(PGM_P str) { send_P(str); sendNewLine(); } -static void sendLine_P(PGM_P str) { - send_P(str); - sendNewLine(); -} +using namespace ExtUI; AnycubicTFTClass::AnycubicTFTClass() {} @@ -80,7 +82,7 @@ void AnycubicTFTClass::OnSetup() { LCD_SERIAL.begin(LCD_BAUDRATE); SENDLINE_DBG_PGM("J17", "TFT Serial Debug: Main board reset... J17"); // J17 Main board reset - ExtUI::delay_ms(10); + delay_ms(10); // initialise the state of the key pins running on the tft #if ENABLED(SDSUPPORT) && PIN_EXISTS(SD_DETECT) @@ -95,13 +97,13 @@ void AnycubicTFTClass::OnSetup() { // DoSDCardStateCheck(); SENDLINE_DBG_PGM("J12", "TFT Serial Debug: Ready... J12"); // J12 Ready - ExtUI::delay_ms(10); + delay_ms(10); DoFilamentRunoutCheck(); SelectedFile[0] = 0; #if ENABLED(STARTUP_CHIME) - ExtUI::injectCommands_P(PSTR("M300 P250 S554\nM300 P250 S554\nM300 P250 S740\nM300 P250 S554\nM300 P250 S740\nM300 P250 S554\nM300 P500 S831")); + injectCommands_P(PSTR("M300 P250 S554\nM300 P250 S554\nM300 P250 S740\nM300 P250 S554\nM300 P250 S740\nM300 P250 S554\nM300 P500 S831")); #endif #if ENABLED(ANYCUBIC_LCD_DEBUG) SERIAL_ECHOLNPGM("TFT Serial Debug: Finished startup"); @@ -119,8 +121,8 @@ void AnycubicTFTClass::OnCommandScan() { #endif mediaPrintingState = AMPRINTSTATE_NOT_PRINTING; mediaPauseState = AMPAUSESTATE_NOT_PAUSED; - ExtUI::injectCommands_P(PSTR("M84\nM27")); // disable stepper motors and force report of SD status - ExtUI::delay_ms(200); + injectCommands_P(PSTR("M84\nM27")); // disable stepper motors and force report of SD status + delay_ms(200); // tell printer to release resources of print to indicate it is done SENDLINE_DBG_PGM("J14", "TFT Serial Debug: SD Print Stopped... J14"); } @@ -224,8 +226,8 @@ bool AnycubicTFTClass::CodeSeen(char code) { } bool AnycubicTFTClass::IsNozzleHomed() { - const float xPosition = ExtUI::getAxisPosition_mm((ExtUI::axis_t) ExtUI::X); - const float yPosition = ExtUI::getAxisPosition_mm((ExtUI::axis_t) ExtUI::Y); + const float xPosition = getAxisPosition_mm((axis_t) X); + const float yPosition = getAxisPosition_mm((axis_t) Y); return WITHIN(xPosition, X_MIN_POS - 0.1, X_MIN_POS + 0.1) && WITHIN(yPosition, Y_MIN_POS - 0.1, Y_MIN_POS + 0.1); } @@ -246,48 +248,48 @@ void AnycubicTFTClass::HandleSpecialMenu() { switch (SelectedDirectory[2]) { case '1': // "<01ZUp0.1>" SERIAL_ECHOLNPGM("Special Menu: Z Up 0.1"); - ExtUI::injectCommands_P(PSTR("G91\nG1 Z+0.1\nG90")); + injectCommands_P(PSTR("G91\nG1 Z+0.1\nG90")); break; case '2': // "<02ZUp0.02>" SERIAL_ECHOLNPGM("Special Menu: Z Up 0.02"); - ExtUI::injectCommands_P(PSTR("G91\nG1 Z+0.02\nG90")); + injectCommands_P(PSTR("G91\nG1 Z+0.02\nG90")); break; case '3': // "<03ZDn0.02>" SERIAL_ECHOLNPGM("Special Menu: Z Down 0.02"); - ExtUI::injectCommands_P(PSTR("G91\nG1 Z-0.02\nG90")); + injectCommands_P(PSTR("G91\nG1 Z-0.02\nG90")); break; case '4': // "<04ZDn0.1>" SERIAL_ECHOLNPGM("Special Menu: Z Down 0.1"); - ExtUI::injectCommands_P(PSTR("G91\nG1 Z-0.1\nG90")); + injectCommands_P(PSTR("G91\nG1 Z-0.1\nG90")); break; case '5': // "<05PrehtBed>" SERIAL_ECHOLNPGM("Special Menu: Preheat Bed"); - ExtUI::injectCommands_P(PSTR("M140 S65")); + injectCommands_P(PSTR("M140 S65")); break; case '6': // "<06SMeshLvl>" SERIAL_ECHOLNPGM("Special Menu: Start Mesh Leveling"); - ExtUI::injectCommands_P(PSTR("G29S1")); + injectCommands_P(PSTR("G29S1")); break; case '7': // "<07MeshNPnt>" SERIAL_ECHOLNPGM("Special Menu: Next Mesh Point"); - ExtUI::injectCommands_P(PSTR("G29S2")); + injectCommands_P(PSTR("G29S2")); break; case '8': // "<08HtEndPID>" SERIAL_ECHOLNPGM("Special Menu: Auto Tune Hotend PID"); // need to dwell for half a second to give the fan a chance to start before the pid tuning starts - ExtUI::injectCommands_P(PSTR("M106 S204\nG4 P500\nM303 E0 S215 C15 U1")); + injectCommands_P(PSTR("M106 S204\nG4 P500\nM303 E0 S215 C15 U1")); break; case '9': // "<09HtBedPID>" SERIAL_ECHOLNPGM("Special Menu: Auto Tune Hotbed Pid"); - ExtUI::injectCommands_P(PSTR("M303 E-1 S65 C6 U1")); + injectCommands_P(PSTR("M303 E-1 S65 C6 U1")); break; default: @@ -299,12 +301,12 @@ void AnycubicTFTClass::HandleSpecialMenu() { switch (SelectedDirectory[2]) { case '0': // "<10FWDeflts>" SERIAL_ECHOLNPGM("Special Menu: Load FW Defaults"); - ExtUI::injectCommands_P(PSTR("M502\nM300 P105 S1661\nM300 P210 S1108")); + injectCommands_P(PSTR("M502\nM300 P105 S1661\nM300 P210 S1108")); break; case '1': // "<11SvEEPROM>" SERIAL_ECHOLNPGM("Special Menu: Save EEPROM"); - ExtUI::injectCommands_P(PSTR("M500\nM300 P105 S1108\nM300 P210 S1661")); + injectCommands_P(PSTR("M500\nM300 P105 S1108\nM300 P210 S1661")); break; default: @@ -316,38 +318,38 @@ void AnycubicTFTClass::HandleSpecialMenu() { switch (SelectedDirectory[2]) { case '1': // "<01PrehtBed>" SERIAL_ECHOLNPGM("Special Menu: Preheat Bed"); - ExtUI::injectCommands_P(PSTR("M140 S65")); + injectCommands_P(PSTR("M140 S65")); break; case '2': // "<02ABL>" SERIAL_ECHOLNPGM("Special Menu: Auto Bed Leveling"); - ExtUI::injectCommands_P(PSTR("G29N")); + injectCommands_P(PSTR("G29N")); break; case '3': // "<03HtendPID>" SERIAL_ECHOLNPGM("Special Menu: Auto Tune Hotend PID"); // need to dwell for half a second to give the fan a chance to start before the pid tuning starts - ExtUI::injectCommands_P(PSTR("M106 S204\nG4 P500\nM303 E0 S215 C15 U1")); + injectCommands_P(PSTR("M106 S204\nG4 P500\nM303 E0 S215 C15 U1")); break; case '4': // "<04HtbedPID>" SERIAL_ECHOLNPGM("Special Menu: Auto Tune Hotbed Pid"); - ExtUI::injectCommands_P(PSTR("M303 E-1 S65 C6 U1")); + injectCommands_P(PSTR("M303 E-1 S65 C6 U1")); break; case '5': // "<05FWDeflts>" SERIAL_ECHOLNPGM("Special Menu: Load FW Defaults"); - ExtUI::injectCommands_P(PSTR("M502\nM300 P105 S1661\nM300 P210 S1108")); + injectCommands_P(PSTR("M502\nM300 P105 S1661\nM300 P210 S1108")); break; case '6': // "<06SvEEPROM>" SERIAL_ECHOLNPGM("Special Menu: Save EEPROM"); - ExtUI::injectCommands_P(PSTR("M500\nM300 P105 S1108\nM300 P210 S1661")); + injectCommands_P(PSTR("M500\nM300 P105 S1108\nM300 P210 S1661")); break; case '7': // <07SendM108> SERIAL_ECHOLNPGM("Special Menu: Send User Confirmation"); - ExtUI::injectCommands_P(PSTR("M108")); + injectCommands_P(PSTR("M108")); break; default: @@ -373,11 +375,11 @@ void AnycubicTFTClass::RenderCurrentFileList() { uint16_t selectedNumber = 0; SelectedDirectory[0] = 0; SelectedFile[0] = 0; - ExtUI::FileList currentFileList; + FileList currentFileList; SENDLINE_PGM("FN "); // Filelist start - if (!ExtUI::isMediaInserted() && !SpecialMenu) { + if (!isMediaInserted() && !SpecialMenu) { SENDLINE_DBG_PGM("J02", "TFT Serial Debug: No SD Card mounted to render Current File List... J02"); SENDLINE_PGM(""); @@ -462,7 +464,7 @@ void AnycubicTFTClass::RenderSpecialMenu(uint16_t selectedNumber) { } void AnycubicTFTClass::RenderCurrentFolder(uint16_t selectedNumber) { - ExtUI::FileList currentFileList; + FileList currentFileList; uint16_t cnt = selectedNumber; uint16_t max_files; uint16_t dir_files = currentFileList.count(); @@ -514,7 +516,7 @@ void AnycubicTFTClass::OnPrintTimerStarted() { void AnycubicTFTClass::OnPrintTimerPaused() { #if ENABLED(SDSUPPORT) - if (ExtUI::isPrintingFromMedia()) { + if (isPrintingFromMedia()) { mediaPrintingState = AMPRINTSTATE_PAUSED; mediaPauseState = AMPAUSESTATE_PARKING; } @@ -558,38 +560,38 @@ void AnycubicTFTClass::GetCommandFromTFT() { switch (a_command) { case 0: { // A0 GET HOTEND TEMP - float hotendActualTemp = ExtUI::getActualTemp_celsius((ExtUI::extruder_t) (ExtUI::extruder_t) ExtUI::E0); + float hotendActualTemp = getActualTemp_celsius((extruder_t) (extruder_t) E0); SEND_PGM_VAL("A0V ", int(hotendActualTemp + 0.5)); } break; case 1: { // A1 GET HOTEND TARGET TEMP - float hotendTargetTemp = ExtUI::getTargetTemp_celsius((ExtUI::extruder_t) (ExtUI::extruder_t) ExtUI::E0); + float hotendTargetTemp = getTargetTemp_celsius((extruder_t) (extruder_t) E0); SEND_PGM_VAL("A1V ", int(hotendTargetTemp + 0.5)); } break; case 2: { // A2 GET HOTBED TEMP - float heatedBedActualTemp = ExtUI::getActualTemp_celsius((ExtUI::heater_t) ExtUI::BED); + float heatedBedActualTemp = getActualTemp_celsius((heater_t) BED); SEND_PGM_VAL("A2V ", int(heatedBedActualTemp + 0.5)); } break; case 3: { // A3 GET HOTBED TARGET TEMP - float heatedBedTargetTemp = ExtUI::getTargetTemp_celsius((ExtUI::heater_t) ExtUI::BED); + float heatedBedTargetTemp = getTargetTemp_celsius((heater_t) BED); SEND_PGM_VAL("A3V ", int(heatedBedTargetTemp + 0.5)); } break; case 4: { // A4 GET FAN SPEED - float fanPercent = ExtUI::getActualFan_percent(ExtUI::FAN0); + float fanPercent = getActualFan_percent(FAN0); fanPercent = constrain(fanPercent, 0, 100); SEND_PGM_VAL("A4V ", int(fanPercent)); } break; case 5: { // A5 GET CURRENT COORDINATE - const float xPosition = ExtUI::getAxisPosition_mm(ExtUI::X), - yPosition = ExtUI::getAxisPosition_mm(ExtUI::Y), - zPosition = ExtUI::getAxisPosition_mm(ExtUI::Z); + const float xPosition = getAxisPosition_mm(X), + yPosition = getAxisPosition_mm(Y), + zPosition = getAxisPosition_mm(Z); SEND_PGM("A5V X: "); LCD_SERIAL.print(xPosition); SEND_PGM( " Y: "); LCD_SERIAL.print(yPosition); SEND_PGM( " Z: "); LCD_SERIAL.print(zPosition); @@ -598,10 +600,10 @@ void AnycubicTFTClass::GetCommandFromTFT() { case 6: // A6 GET SD CARD PRINTING STATUS #if ENABLED(SDSUPPORT) - if (ExtUI::isPrintingFromMedia()) { + if (isPrintingFromMedia()) { SEND_PGM("A6V "); - if (ExtUI::isMediaInserted()) - SENDLINE(ui8tostr3rj(ExtUI::getProgress_percent())); + if (isMediaInserted()) + SENDLINE(ui8tostr3rj(getProgress_percent())); else SENDLINE_DBG_PGM("J02", "TFT Serial Debug: No SD Card mounted to return printing status... J02"); } @@ -611,7 +613,7 @@ void AnycubicTFTClass::GetCommandFromTFT() { break; case 7: { // A7 GET PRINTING TIME - const uint32_t elapsedSeconds = ExtUI::getProgress_seconds_elapsed(); + const uint32_t elapsedSeconds = getProgress_seconds_elapsed(); SEND_PGM("A7V "); if (elapsedSeconds != 0) { // print time const uint32_t elapsedMinutes = elapsedSeconds / 60; @@ -634,14 +636,14 @@ void AnycubicTFTClass::GetCommandFromTFT() { case 9: // A9 pause sd print #if ENABLED(SDSUPPORT) - if (ExtUI::isPrintingFromMedia()) + if (isPrintingFromMedia()) PausePrint(); #endif break; case 10: // A10 resume sd print #if ENABLED(SDSUPPORT) - if (ExtUI::isPrintingFromMediaPaused()) + if (isPrintingFromMediaPaused()) ResumePrint(); #endif break; @@ -656,7 +658,7 @@ void AnycubicTFTClass::GetCommandFromTFT() { case 13: // A13 SELECTION FILE #if ENABLED(SDSUPPORT) - if (ExtUI::isMediaInserted()) { + if (isMediaInserted()) { starpos = (strchr(TFTstrchr_pointer + 4, '*')); if (TFTstrchr_pointer[4] == '/') { strcpy(SelectedDirectory, TFTstrchr_pointer + 5); @@ -685,7 +687,7 @@ void AnycubicTFTClass::GetCommandFromTFT() { case 14: // A14 START PRINTING #if ENABLED(SDSUPPORT) - if (!ExtUI::isPrinting() && strlen(SelectedFile) > 0) + if (!isPrinting() && strlen(SelectedFile) > 0) StartPrint(); #endif break; @@ -698,13 +700,13 @@ void AnycubicTFTClass::GetCommandFromTFT() { unsigned int tempvalue; if (CodeSeen('S')) { tempvalue = constrain(CodeValue(), 0, 275); - ExtUI::setTargetTemp_celsius(tempvalue, (ExtUI::extruder_t) ExtUI::E0); + setTargetTemp_celsius(tempvalue, (extruder_t) E0); } - else if (CodeSeen('C') && !ExtUI::isPrinting()) { - if (ExtUI::getAxisPosition_mm(ExtUI::Z) < 10) - ExtUI::injectCommands_P(PSTR("G1 Z10")); // RASE Z AXIS + else if (CodeSeen('C') && !isPrinting()) { + if (getAxisPosition_mm(Z) < 10) + injectCommands_P(PSTR("G1 Z10")); // RASE Z AXIS tempvalue = constrain(CodeValue(), 0, 275); - ExtUI::setTargetTemp_celsius(tempvalue, (ExtUI::extruder_t) ExtUI::E0); + setTargetTemp_celsius(tempvalue, (extruder_t) E0); } } break; @@ -713,7 +715,7 @@ void AnycubicTFTClass::GetCommandFromTFT() { unsigned int tempbed; if (CodeSeen('S')) { tempbed = constrain(CodeValue(), 0, 100); - ExtUI::setTargetTemp_celsius(tempbed, (ExtUI::heater_t)ExtUI::BED); + setTargetTemp_celsius(tempbed, (heater_t)BED); } } break; @@ -723,18 +725,18 @@ void AnycubicTFTClass::GetCommandFromTFT() { if (CodeSeen('S')) { fanPercent = CodeValue(); fanPercent = constrain(fanPercent, 0, 100); - ExtUI::setTargetFan_percent(fanPercent, ExtUI::FAN0); + setTargetFan_percent(fanPercent, FAN0); } else fanPercent = 100; - ExtUI::setTargetFan_percent(fanPercent, ExtUI::FAN0); + setTargetFan_percent(fanPercent, FAN0); SENDLINE_PGM(""); } break; case 19: // A19 stop stepper drivers - sent on stop extrude command and on turn motors off command - if (!ExtUI::isPrinting()) { + if (!isPrinting()) { quickstop_stepper(); disable_all_steppers(); } @@ -750,23 +752,23 @@ void AnycubicTFTClass::GetCommandFromTFT() { break; case 21: // A21 all home - if (!ExtUI::isPrinting() && !ExtUI::isPrintingFromMediaPaused()) { + if (!isPrinting() && !isPrintingFromMediaPaused()) { if (CodeSeen('X') || CodeSeen('Y') || CodeSeen('Z')) { if (CodeSeen('X')) - ExtUI::injectCommands_P(PSTR("G28X")); + injectCommands_P(PSTR("G28X")); if (CodeSeen('Y')) - ExtUI::injectCommands_P(PSTR("G28Y")); + injectCommands_P(PSTR("G28Y")); if (CodeSeen('Z')) - ExtUI::injectCommands_P(PSTR("G28Z")); + injectCommands_P(PSTR("G28Z")); } else if (CodeSeen('C')) { - ExtUI::injectCommands_P(G28_STR); + injectCommands_P(G28_STR); } } break; case 22: // A22 move X/Y/Z or extrude - if (!ExtUI::isPrinting()) { + if (!isPrinting()) { float coorvalue; unsigned int movespeed = 0; char commandStr[30]; @@ -819,38 +821,38 @@ void AnycubicTFTClass::GetCommandFromTFT() { SERIAL_ECHOPGM("TFT Serial Debug: A22 Move final request with gcode... "); SERIAL_ECHOLN(fullCommandStr); #endif - ExtUI::injectCommands(fullCommandStr); + injectCommands(fullCommandStr); } } SENDLINE_PGM(""); break; case 23: // A23 preheat pla - if (!ExtUI::isPrinting()) { - if (ExtUI::getAxisPosition_mm(ExtUI::Z) < 10) - ExtUI::injectCommands_P(PSTR("G1 Z10")); // RASE Z AXIS + if (!isPrinting()) { + if (getAxisPosition_mm(Z) < 10) + injectCommands_P(PSTR("G1 Z10")); // RASE Z AXIS - ExtUI::setTargetTemp_celsius(PREHEAT_1_TEMP_BED, (ExtUI::heater_t) ExtUI::BED); - ExtUI::setTargetTemp_celsius(PREHEAT_1_TEMP_HOTEND, (ExtUI::extruder_t) ExtUI::E0); + setTargetTemp_celsius(PREHEAT_1_TEMP_BED, (heater_t) BED); + setTargetTemp_celsius(PREHEAT_1_TEMP_HOTEND, (extruder_t) E0); SENDLINE_PGM("OK"); } break; case 24:// A24 preheat abs - if (!ExtUI::isPrinting()) { - if (ExtUI::getAxisPosition_mm(ExtUI::Z) < 10) - ExtUI::injectCommands_P(PSTR("G1 Z10")); // RASE Z AXIS + if (!isPrinting()) { + if (getAxisPosition_mm(Z) < 10) + injectCommands_P(PSTR("G1 Z10")); // RASE Z AXIS - ExtUI::setTargetTemp_celsius(PREHEAT_2_TEMP_BED, (ExtUI::heater_t) ExtUI::BED); - ExtUI::setTargetTemp_celsius(PREHEAT_2_TEMP_HOTEND, (ExtUI::extruder_t) ExtUI::E0); + setTargetTemp_celsius(PREHEAT_2_TEMP_BED, (heater_t) BED); + setTargetTemp_celsius(PREHEAT_2_TEMP_HOTEND, (extruder_t) E0); SENDLINE_PGM("OK"); } break; case 25: // A25 cool down - if (!ExtUI::isPrinting()) { - ExtUI::setTargetTemp_celsius(0, (ExtUI::heater_t) ExtUI::BED); - ExtUI::setTargetTemp_celsius(0, (ExtUI::extruder_t) ExtUI::E0); + if (!isPrinting()) { + setTargetTemp_celsius(0, (heater_t) BED); + setTargetTemp_celsius(0, (extruder_t) E0); SENDLINE_DBG_PGM("J12", "TFT Serial Debug: Cooling down... J12"); // J12 cool down } @@ -858,9 +860,9 @@ void AnycubicTFTClass::GetCommandFromTFT() { case 26: // A26 refresh SD #if ENABLED(SDSUPPORT) - if (ExtUI::isMediaInserted()) { + if (isMediaInserted()) { if (strlen(SelectedDirectory) > 0) { - ExtUI::FileList currentFileList; + FileList currentFileList; if ((SelectedDirectory[0] == '.') && (SelectedDirectory[1] == '.')) { currentFileList.upDir(); } @@ -914,7 +916,7 @@ void AnycubicTFTClass::GetCommandFromTFT() { void AnycubicTFTClass::DoSDCardStateCheck() { #if ENABLED(SDSUPPORT) && PIN_EXISTS(SD_DETECT) - bool isInserted = ExtUI::isMediaInserted(); + bool isInserted = isMediaInserted(); if (isInserted) SENDLINE_DBG_PGM("J00", "TFT Serial Debug: SD card state changed... isInserted"); else @@ -925,12 +927,12 @@ void AnycubicTFTClass::DoSDCardStateCheck() { void AnycubicTFTClass::DoFilamentRunoutCheck() { #if ENABLED(FILAMENT_RUNOUT_SENSOR) - // NOTE: ExtUI::getFilamentRunoutState() only returns the runout state if the job is printing + // NOTE: getFilamentRunoutState() only returns the runout state if the job is printing // we want to actually check the status of the pin here, regardless of printstate if (READ(FIL_RUNOUT1_PIN)) { if (mediaPrintingState == AMPRINTSTATE_PRINTING || mediaPrintingState == AMPRINTSTATE_PAUSED || mediaPrintingState == AMPRINTSTATE_PAUSE_REQUESTED) { // play tone to indicate filament is out - ExtUI::injectCommands_P(PSTR("\nM300 P200 S1567\nM300 P200 S1174\nM300 P200 S1567\nM300 P200 S1174\nM300 P2000 S1567")); + injectCommands_P(PSTR("\nM300 P200 S1567\nM300 P200 S1174\nM300 P200 S1567\nM300 P200 S1174\nM300 P2000 S1567")); // tell the user that the filament has run out and wait SENDLINE_DBG_PGM("J23", "TFT Serial Debug: Blocking filament prompt... J23"); @@ -944,30 +946,30 @@ void AnycubicTFTClass::DoFilamentRunoutCheck() { void AnycubicTFTClass::StartPrint() { #if ENABLED(SDSUPPORT) - if (!ExtUI::isPrinting() && strlen(SelectedFile) > 0) { + if (!isPrinting() && strlen(SelectedFile) > 0) { #if ENABLED(ANYCUBIC_LCD_DEBUG) SERIAL_ECHOPGM("TFT Serial Debug: About to print file ... "); - SERIAL_ECHO(ExtUI::isPrinting()); + SERIAL_ECHO(isPrinting()); SERIAL_ECHOPGM(" "); SERIAL_ECHOLN(SelectedFile); #endif mediaPrintingState = AMPRINTSTATE_PRINTING; mediaPauseState = AMPAUSESTATE_NOT_PAUSED; - ExtUI::printFile(SelectedFile); + printFile(SelectedFile); } #endif // SDUPPORT } void AnycubicTFTClass::PausePrint() { #if ENABLED(SDSUPPORT) - if (ExtUI::isPrintingFromMedia() && mediaPrintingState != AMPRINTSTATE_STOP_REQUESTED && mediaPauseState == AMPAUSESTATE_NOT_PAUSED) { + if (isPrintingFromMedia() && mediaPrintingState != AMPRINTSTATE_STOP_REQUESTED && mediaPauseState == AMPAUSESTATE_NOT_PAUSED) { mediaPrintingState = AMPRINTSTATE_PAUSE_REQUESTED; mediaPauseState = AMPAUSESTATE_NOT_PAUSED; // need the userconfirm method to update pause state SENDLINE_DBG_PGM("J05", "TFT Serial Debug: SD print pause started... J05"); // J05 printing pause // for some reason pausing the print doesn't retract the extruder so force a manual one here - ExtUI::injectCommands_P(PSTR("G91\nG1 E-2 F1800\nG90")); - ExtUI::pausePrint(); + injectCommands_P(PSTR("G91\nG1 E-2 F1800\nG90")); + pausePrint(); } #endif } @@ -996,14 +998,14 @@ void AnycubicTFTClass::ResumePrint() { // SENDLINE_DBG_PGM("J05", "TFT Serial Debug: Resume called with heater timeout... J05"); // J05 printing pause // reheat the nozzle - ExtUI::setUserConfirmed(); + setUserConfirmed(); } else { mediaPrintingState = AMPRINTSTATE_PRINTING; mediaPauseState = AMPAUSESTATE_NOT_PAUSED; SENDLINE_DBG_PGM("J04", "TFT Serial Debug: SD print resumed... J04"); // J04 printing form sd card now - ExtUI::resumePrint(); + resumePrint(); } #endif } @@ -1015,8 +1017,8 @@ void AnycubicTFTClass::StopPrint() { SENDLINE_DBG_PGM("J16", "TFT Serial Debug: SD print stop called... J16"); // for some reason stopping the print doesn't retract the extruder so force a manual one here - ExtUI::injectCommands_P(PSTR("G91\nG1 E-2 F1800\nG90")); - ExtUI::stopPrint(); + injectCommands_P(PSTR("G91\nG1 E-2 F1800\nG90")); + stopPrint(); #endif } diff --git a/Marlin/src/lcd/extui/lib/anycubic_i3mega/anycubic_i3mega_lcd.h b/Marlin/src/lcd/extui/lib/anycubic_i3mega/anycubic_i3mega_lcd.h index 59050acccb..e34cb2fe69 100644 --- a/Marlin/src/lcd/extui/lib/anycubic_i3mega/anycubic_i3mega_lcd.h +++ b/Marlin/src/lcd/extui/lib/anycubic_i3mega/anycubic_i3mega_lcd.h @@ -2,7 +2,7 @@ * anycubic_i3mega_lcd.h --- Support for Anycubic i3 Mega TFT * Created by Christian Hopp on 09.12.17. * Improved by David Ramiro - * Converted to ext_iu by John BouAntoun 21 June 2020 + * Converted to ExtUI by John BouAntoun 21 June 2020 * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public @@ -48,49 +48,47 @@ enum AnycubicMediaPauseState { class AnycubicTFTClass { public: AnycubicTFTClass(); - void OnSetup(); - void OnCommandScan(); - void OnKillTFT(); - void OnSDCardStateChange(bool); - void OnSDCardError(); - void OnFilamentRunout(); - void OnUserConfirmRequired(const char *); - void OnPrintTimerStarted(); - void OnPrintTimerPaused(); - void OnPrintTimerStopped(); + static void OnSetup(); + static void OnCommandScan(); + static void OnKillTFT(); + static void OnSDCardStateChange(bool); + static void OnSDCardError(); + static void OnFilamentRunout(); + static void OnUserConfirmRequired(const char *); + static void OnPrintTimerStarted(); + static void OnPrintTimerPaused(); + static void OnPrintTimerStopped(); private: - char TFTcmdbuffer[TFTBUFSIZE][TFT_MAX_CMD_SIZE]; - int TFTbuflen=0; - int TFTbufindr = 0; - int TFTbufindw = 0; - char serial3_char; - int serial3_count = 0; - char *TFTstrchr_pointer; - uint8_t SpecialMenu = false; - AnycubicMediaPrintState mediaPrintingState = AMPRINTSTATE_NOT_PRINTING; - AnycubicMediaPauseState mediaPauseState = AMPAUSESTATE_NOT_PAUSED; + static char TFTcmdbuffer[TFTBUFSIZE][TFT_MAX_CMD_SIZE]; + static int TFTbuflen, TFTbufindr, TFTbufindw; + static char serial3_char; + static int serial3_count; + static char *TFTstrchr_pointer; + static uint8_t SpecialMenu; + static AnycubicMediaPrintState mediaPrintingState; + static AnycubicMediaPauseState mediaPauseState; - float CodeValue(); - bool CodeSeen(char); - bool IsNozzleHomed(); - void RenderCurrentFileList(); - void RenderSpecialMenu(uint16_t); - void RenderCurrentFolder(uint16_t); - void GetCommandFromTFT(); - void CheckSDCardChange(); - void CheckPauseState(); - void CheckPrintCompletion(); - void HandleSpecialMenu(); - void DoSDCardStateCheck(); - void DoFilamentRunoutCheck(); - void StartPrint(); - void PausePrint(); - void ResumePrint(); - void StopPrint(); + static float CodeValue(); + static bool CodeSeen(char); + static bool IsNozzleHomed(); + static void RenderCurrentFileList(); + static void RenderSpecialMenu(uint16_t); + static void RenderCurrentFolder(uint16_t); + static void GetCommandFromTFT(); + static void CheckSDCardChange(); + static void CheckPauseState(); + static void CheckPrintCompletion(); + static void HandleSpecialMenu(); + static void DoSDCardStateCheck(); + static void DoFilamentRunoutCheck(); + static void StartPrint(); + static void PausePrint(); + static void ResumePrint(); + static void StopPrint(); - char SelectedDirectory[30]; - char SelectedFile[FILENAME_LENGTH]; + static char SelectedDirectory[30]; + static char SelectedFile[FILENAME_LENGTH]; }; extern AnycubicTFTClass AnycubicTFT; diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/marlin_events.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/marlin_events.cpp index fc9b5d0a70..902ede025c 100644 --- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/marlin_events.cpp +++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/marlin_events.cpp @@ -140,7 +140,7 @@ namespace ExtUI { #if HAS_LEVELING && HAS_MESH void onMeshLevelingStart() {} - void onMeshUpdate(const int8_t x, const int8_t y, const float val) { + void onMeshUpdate(const int8_t x, const int8_t y, const float &val) { BedMeshScreen::onMeshUpdate(x, y, val); } diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bed_mesh_screen.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bed_mesh_screen.h index 7aac484cb6..de72d863ae 100644 --- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bed_mesh_screen.h +++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bed_mesh_screen.h @@ -51,7 +51,7 @@ class BedMeshScreen : public BaseScreen, public CachedScreen 0 ? CEIL(steps) : FLOOR(steps); } - #endif + + #endif // BABYSTEPPING float getZOffset_mm() { return (0.0f @@ -754,7 +744,7 @@ namespace ExtUI { ); } - void setZOffset_mm(const float value) { + void setZOffset_mm(const float &value) { #if HAS_BED_PROBE if (WITHIN(value, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX)) probe.offset.z = value; @@ -772,7 +762,7 @@ namespace ExtUI { return hotend_offset[extruder - E0][axis]; } - void setNozzleOffset_mm(const float value, const axis_t axis, const extruder_t extruder) { + void setNozzleOffset_mm(const float &value, const axis_t axis, const extruder_t extruder) { if (extruder - E0 >= HOTENDS) return; hotend_offset[extruder - E0][axis] = value; } @@ -790,25 +780,21 @@ namespace ExtUI { #endif // HAS_HOTEND_OFFSET #if HAS_BED_PROBE - float getProbeOffset_mm(const axis_t axis) { - return probe.offset.pos[axis]; - } - void setProbeOffset_mm(const float val, const axis_t axis) { - probe.offset.pos[axis] = val; - } + float getProbeOffset_mm(const axis_t axis) { return probe.offset.pos[axis]; } + void setProbeOffset_mm(const float &val, const axis_t axis) { probe.offset.pos[axis] = val; } #endif #if ENABLED(BACKLASH_GCODE) float getAxisBacklash_mm(const axis_t axis) { return backlash.distance_mm[axis]; } - void setAxisBacklash_mm(const float value, const axis_t axis) + void setAxisBacklash_mm(const float &value, const axis_t axis) { backlash.distance_mm[axis] = constrain(value,0,5); } float getBacklashCorrection_percent() { return ui8_to_percent(backlash.correction); } - void setBacklashCorrection_percent(const float value) { backlash.correction = map(constrain(value, 0, 100), 0, 100, 0, 255); } + void setBacklashCorrection_percent(const float &value) { backlash.correction = map(constrain(value, 0, 100), 0, 100, 0, 255); } #ifdef BACKLASH_SMOOTHING_MM float getBacklashSmoothing_mm() { return backlash.smoothing_mm; } - void setBacklashSmoothing_mm(const float value) { backlash.smoothing_mm = constrain(value, 0, 999); } + void setBacklashSmoothing_mm(const float &value) { backlash.smoothing_mm = constrain(value, 0, 999); } #endif #endif @@ -824,7 +810,7 @@ namespace ExtUI { #if HAS_MESH bed_mesh_t& getMeshArray() { return Z_VALUES_ARR; } float getMeshPoint(const xy_uint8_t &pos) { return Z_VALUES(pos.x, pos.y); } - void setMeshPoint(const xy_uint8_t &pos, const float zoff) { + void setMeshPoint(const xy_uint8_t &pos, const float &zoff) { if (WITHIN(pos.x, 0, GRID_MAX_POINTS_X) && WITHIN(pos.y, 0, GRID_MAX_POINTS_Y)) { Z_VALUES(pos.x, pos.y) = zoff; TERN_(ABL_BILINEAR_SUBDIVISION, bed_level_virt_interpolate()); @@ -838,6 +824,7 @@ namespace ExtUI { #endif #if ENABLED(PRINTCOUNTER) + char* getFailedPrints_str(char buffer[21]) { strcpy(buffer,i16tostr3left(print_job_timer.getStats().totalPrints - print_job_timer.getStats().finishedPrints)); return buffer; } char* getTotalPrints_str(char buffer[21]) { strcpy(buffer,i16tostr3left(print_job_timer.getStats().totalPrints)); return buffer; } char* getFinishedPrints_str(char buffer[21]) { strcpy(buffer,i16tostr3left(print_job_timer.getStats().finishedPrints)); return buffer; } char* getTotalPrintTime_str(char buffer[21]) { return duration_t(print_job_timer.getStats().printTime).toString(buffer); } @@ -856,14 +843,14 @@ namespace ExtUI { float getPIDValues_Ki(const extruder_t tool) { return unscalePID_i(PID_PARAM(Ki, tool)); } float getPIDValues_Kd(const extruder_t tool) { return unscalePID_d(PID_PARAM(Kd, tool)); } - void setPIDValues(const float p, const float i, const float d, extruder_t tool) { + void setPIDValues(const float &p, const float &i, const float &d, extruder_t tool) { thermalManager.temp_hotend[tool].pid.Kp = p; thermalManager.temp_hotend[tool].pid.Ki = scalePID_i(i); thermalManager.temp_hotend[tool].pid.Kd = scalePID_d(d); thermalManager.updatePID(); } - void startPIDTune(const float temp, extruder_t tool) { + void startPIDTune(const float &temp, extruder_t tool) { thermalManager.PID_autotune(temp, (heater_id_t)tool, 8, true); } #endif @@ -873,14 +860,14 @@ namespace ExtUI { float getBedPIDValues_Ki() { return unscalePID_i(thermalManager.temp_bed.pid.Ki); } float getBedPIDValues_Kd() { return unscalePID_d(thermalManager.temp_bed.pid.Kd); } - void setBedPIDValues(const float p, const float i, const float d) { + void setBedPIDValues(const float &p, const float &i, const float &d) { thermalManager.temp_bed.pid.Kp = p; thermalManager.temp_bed.pid.Ki = scalePID_i(i); thermalManager.temp_bed.pid.Kd = scalePID_d(d); thermalManager.updatePID(); } - void startBedPIDTune(const float temp) { + void startBedPIDTune(const float &temp) { thermalManager.PID_autotune(temp, H_BED, 4, true); } #endif @@ -900,7 +887,8 @@ namespace ExtUI { return firmware_name; } - void setTargetTemp_celsius(float value, const heater_t heater) { + void setTargetTemp_celsius(const float &inval, const heater_t heater) { + float value = inval; #ifdef TOUCH_UI_LCD_TEMP_SCALING value *= TOUCH_UI_LCD_TEMP_SCALING; #endif @@ -924,7 +912,8 @@ namespace ExtUI { } } - void setTargetTemp_celsius(float value, const extruder_t extruder) { + void setTargetTemp_celsius(const float &inval, const extruder_t extruder) { + float value = inval; #ifdef TOUCH_UI_LCD_TEMP_SCALING value *= TOUCH_UI_LCD_TEMP_SCALING; #endif @@ -935,7 +924,7 @@ namespace ExtUI { #endif } - void setTargetFan_percent(const float value, const fan_t fan) { + void setTargetFan_percent(const float &value, const fan_t fan) { #if HAS_FAN if (fan < FAN_COUNT) thermalManager.set_fan_speed(fan - FAN0, map(constrain(value, 0, 100), 0, 100, 0, 255)); @@ -945,25 +934,27 @@ namespace ExtUI { #endif } - void setFeedrate_percent(const float value) { - feedrate_percentage = constrain(value, 10, 500); - } + void setFeedrate_percent(const float &value) { feedrate_percentage = constrain(value, 10, 500); } - bool awaitingUserConfirm() { - return wait_for_user; + void coolDown() { + #if HAS_HOTEND + HOTEND_LOOP() thermalManager.setTargetHotend(0, e); + #endif + TERN_(HAS_HEATED_BED, thermalManager.setTargetBed(0)); + TERN_(HAS_FAN, thermalManager.zero_fan_speeds()); } - void setUserConfirmed() { - TERN_(HAS_RESUME_CONTINUE, wait_for_user = false); - } + bool awaitingUserConfirm() { return wait_for_user; } + + void setUserConfirmed() { TERN_(HAS_RESUME_CONTINUE, wait_for_user = false); } void printFile(const char *filename) { UNUSED(filename); - IFSD(card.openAndPrintFile(filename), NOOP); + TERN_(SDSUPPORT, card.openAndPrintFile(filename)); } bool isPrintingFromMediaPaused() { - return IFSD(isPrintingFromMedia() && !IS_SD_PRINTING(), false); + return TERN0(SDSUPPORT, isPrintingFromMedia() && !IS_SD_PRINTING()); } bool isPrintingFromMedia() { @@ -978,16 +969,14 @@ namespace ExtUI { } bool isPrinting() { - return (commandsInQueue() || isPrintingFromMedia() || IFSD(IS_SD_PRINTING(), false)) || print_job_timer.isRunning() || print_job_timer.isPaused(); + return (commandsInQueue() || isPrintingFromMedia() || TERN0(SDSUPPORT, IS_SD_PRINTING())) || print_job_timer.isRunning() || print_job_timer.isPaused(); } bool isPrintingPaused() { return isPrinting() && (isPrintingFromMediaPaused() || print_job_timer.isPaused()); } - bool isMediaInserted() { - return IFSD(IS_SD_INSERTED() && card.isMounted(), false); - } + bool isMediaInserted() { return TERN0(SDSUPPORT, IS_SD_INSERTED() && card.isMounted()); } void pausePrint() { ui.pause_print(); } void resumePrint() { ui.resume_print(); } @@ -1022,27 +1011,27 @@ namespace ExtUI { } const char* FileList::filename() { - return IFSD(card.longest_filename(), ""); + return TERN(SDSUPPORT, card.longest_filename(), ""); } const char* FileList::shortFilename() { - return IFSD(card.filename, ""); + return TERN(SDSUPPORT, card.filename, ""); } const char* FileList::longFilename() { - return IFSD(card.longFilename, ""); + return TERN(SDSUPPORT, card.longFilename, ""); } bool FileList::isDir() { - return IFSD(card.flag.filenameIsDir, false); + return TERN0(SDSUPPORT, card.flag.filenameIsDir); } uint16_t FileList::count() { - return IFSD((num_files = (num_files == 0xFFFF ? card.get_num_Files() : num_files)), 0); + return TERN0(SDSUPPORT, (num_files = (num_files == 0xFFFF ? card.get_num_Files() : num_files))); } bool FileList::isAtRootDir() { - return IFSD(card.flag.workDirIsRoot, true); + return TERN1(SDSUPPORT, card.flag.workDirIsRoot); } void FileList::upDir() { diff --git a/Marlin/src/lcd/extui/ui_api.h b/Marlin/src/lcd/extui/ui_api.h index a6cfb82b88..701bf9eb54 100644 --- a/Marlin/src/lcd/extui/ui_api.h +++ b/Marlin/src/lcd/extui/ui_api.h @@ -102,11 +102,11 @@ namespace ExtUI { #if HAS_TRINAMIC_CONFIG float getAxisCurrent_mA(const axis_t); float getAxisCurrent_mA(const extruder_t); - void setAxisCurrent_mA(const float, const axis_t); - void setAxisCurrent_mA(const float, const extruder_t); + void setAxisCurrent_mA(const float&, const axis_t); + void setAxisCurrent_mA(const float&, const extruder_t); int getTMCBumpSensitivity(const axis_t); - void setTMCBumpSensitivity(const float, const axis_t); + void setTMCBumpSensitivity(const float&, const axis_t); #endif float getActualTemp_celsius(const heater_t); @@ -150,10 +150,10 @@ namespace ExtUI { #if HAS_MESH bed_mesh_t& getMeshArray(); float getMeshPoint(const xy_uint8_t &pos); - void setMeshPoint(const xy_uint8_t &pos, const float zval); + void setMeshPoint(const xy_uint8_t &pos, const float &zval); void onMeshLevelingStart(); - void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float zval); - inline void onMeshUpdate(const xy_int8_t &pos, const float zval) { onMeshUpdate(pos.x, pos.y, zval); } + void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float &zval); + inline void onMeshUpdate(const xy_int8_t &pos, const float &zval) { onMeshUpdate(pos.x, pos.y, zval); } typedef enum : uint8_t { MESH_START, // Prior to start of probe @@ -178,41 +178,42 @@ namespace ExtUI { char* getFilamentUsed_str(char buffer[21]); #endif - void setTargetTemp_celsius(const float, const heater_t); - void setTargetTemp_celsius(const float, const extruder_t); - void setTargetFan_percent(const float, const fan_t); - void setAxisPosition_mm(const float, const axis_t, const feedRate_t=0); - void setAxisPosition_mm(const float, const extruder_t, const feedRate_t=0); - void setAxisSteps_per_mm(const float, const axis_t); - void setAxisSteps_per_mm(const float, const extruder_t); + void setTargetTemp_celsius(const float&, const heater_t); + void setTargetTemp_celsius(const float&, const extruder_t); + void setTargetFan_percent(const float&, const fan_t); + void coolDown(); + void setAxisPosition_mm(const float&, const axis_t, const feedRate_t=0); + void setAxisPosition_mm(const float&, const extruder_t, const feedRate_t=0); + void setAxisSteps_per_mm(const float&, const axis_t); + void setAxisSteps_per_mm(const float&, const extruder_t); void setAxisMaxFeedrate_mm_s(const feedRate_t, const axis_t); void setAxisMaxFeedrate_mm_s(const feedRate_t, const extruder_t); - void setAxisMaxAcceleration_mm_s2(const float, const axis_t); - void setAxisMaxAcceleration_mm_s2(const float, const extruder_t); + void setAxisMaxAcceleration_mm_s2(const float&, const axis_t); + void setAxisMaxAcceleration_mm_s2(const float&, const extruder_t); void setFeedrate_mm_s(const feedRate_t); void setMinFeedrate_mm_s(const feedRate_t); void setMinTravelFeedrate_mm_s(const feedRate_t); - void setPrintingAcceleration_mm_s2(const float); - void setRetractAcceleration_mm_s2(const float); - void setTravelAcceleration_mm_s2(const float); - void setFeedrate_percent(const float); + void setPrintingAcceleration_mm_s2(const float&); + void setRetractAcceleration_mm_s2(const float&); + void setTravelAcceleration_mm_s2(const float&); + void setFeedrate_percent(const float&); void setFlow_percent(const int16_t, const extruder_t); bool awaitingUserConfirm(); void setUserConfirmed(); #if ENABLED(LIN_ADVANCE) float getLinearAdvance_mm_mm_s(const extruder_t); - void setLinearAdvance_mm_mm_s(const float, const extruder_t); + void setLinearAdvance_mm_mm_s(const float&, const extruder_t); #endif #if HAS_JUNCTION_DEVIATION float getJunctionDeviation_mm(); - void setJunctionDeviation_mm(const float); + void setJunctionDeviation_mm(const float&); #else float getAxisMaxJerk_mm_s(const axis_t); float getAxisMaxJerk_mm_s(const extruder_t); - void setAxisMaxJerk_mm_s(const float, const axis_t); - void setAxisMaxJerk_mm_s(const float, const extruder_t); + void setAxisMaxJerk_mm_s(const float&, const axis_t); + void setAxisMaxJerk_mm_s(const float&, const extruder_t); #endif extruder_t getTool(const uint8_t extruder); @@ -220,7 +221,7 @@ namespace ExtUI { void setActiveTool(const extruder_t, bool no_move); #if ENABLED(BABYSTEPPING) - int16_t mmToWholeSteps(const float mm, const axis_t axis); + int16_t mmToWholeSteps(const float& mm, const axis_t axis); bool babystepAxis_steps(const int16_t steps, const axis_t axis); void smartAdjustAxis_steps(const int16_t steps, const axis_t axis, bool linked_nozzles); @@ -228,28 +229,28 @@ namespace ExtUI { #if HAS_HOTEND_OFFSET float getNozzleOffset_mm(const axis_t, const extruder_t); - void setNozzleOffset_mm(const float, const axis_t, const extruder_t); + void setNozzleOffset_mm(const float&, const axis_t, const extruder_t); void normalizeNozzleOffset(const axis_t axis); #endif float getZOffset_mm(); - void setZOffset_mm(const float); + void setZOffset_mm(const float&); #if HAS_BED_PROBE float getProbeOffset_mm(const axis_t); - void setProbeOffset_mm(const float, const axis_t); + void setProbeOffset_mm(const float&, const axis_t); #endif #if ENABLED(BACKLASH_GCODE) float getAxisBacklash_mm(const axis_t); - void setAxisBacklash_mm(const float, const axis_t); + void setAxisBacklash_mm(const float&, const axis_t); float getBacklashCorrection_percent(); - void setBacklashCorrection_percent(const float); + void setBacklashCorrection_percent(const float&); #ifdef BACKLASH_SMOOTHING_MM float getBacklashSmoothing_mm(); - void setBacklashSmoothing_mm(const float); + void setBacklashSmoothing_mm(const float&); #endif #endif @@ -261,7 +262,7 @@ namespace ExtUI { #if HAS_FILAMENT_RUNOUT_DISTANCE float getFilamentRunoutDistance_mm(); - void setFilamentRunoutDistance_mm(const float); + void setFilamentRunoutDistance_mm(const float&); #endif #endif @@ -271,7 +272,7 @@ namespace ExtUI { #if DISABLED(CASE_LIGHT_NO_BRIGHTNESS) float getCaseLightBrightness_percent(); - void setCaseLightBrightness_percent(const float); + void setCaseLightBrightness_percent(const float&); #endif #endif @@ -279,16 +280,16 @@ namespace ExtUI { float getPIDValues_Kp(const extruder_t); float getPIDValues_Ki(const extruder_t); float getPIDValues_Kd(const extruder_t); - void setPIDValues(const float, const float, const float, extruder_t); - void startPIDTune(const float, extruder_t); + void setPIDValues(const float&, const float&, const float&, extruder_t); + void startPIDTune(const float&, extruder_t); #endif #if ENABLED(PIDTEMPBED) float getBedPIDValues_Kp(); float getBedPIDValues_Ki(); float getBedPIDValues_Kd(); - void setBedPIDValues(const float, const float, const float); - void startBedPIDTune(const float); + void setBedPIDValues(const float&, const float&, const float&); + void startBedPIDTune(const float&); #endif /** diff --git a/Marlin/src/sd/cardreader.h b/Marlin/src/sd/cardreader.h index f823b79e7a..4399d9a4b6 100644 --- a/Marlin/src/sd/cardreader.h +++ b/Marlin/src/sd/cardreader.h @@ -23,8 +23,6 @@ #include "../inc/MarlinConfig.h" -#define IFSD(A,B) TERN(SDSUPPORT,A,B) - #if ENABLED(SDSUPPORT) extern const char M23_STR[], M24_STR[];