diff --git a/Marlin/src/feature/leds/leds.cpp b/Marlin/src/feature/leds/leds.cpp index 328daa626d..17e31afa5a 100644 --- a/Marlin/src/feature/leds/leds.cpp +++ b/Marlin/src/feature/leds/leds.cpp @@ -170,9 +170,9 @@ void LEDLights::set_color(const LEDColor &incol #if ENABLED(NEO2_COLOR_PRESETS) const LEDColor LEDLights2::defaultLEDColor = LEDColor( - LED_USER_PRESET_RED, LED_USER_PRESET_GREEN, LED_USER_PRESET_BLUE - OPTARG(HAS_WHITE_LED2, LED_USER_PRESET_WHITE) - OPTARG(NEOPIXEL_LED, LED_USER_PRESET_BRIGHTNESS) + NEO2_USER_PRESET_RED, NEO2_USER_PRESET_GREEN, NEO2_USER_PRESET_BLUE + OPTARG(HAS_WHITE_LED2, NEO2_USER_PRESET_WHITE) + OPTARG(NEOPIXEL_LED, NEO2_USER_PRESET_BRIGHTNESS) ); #endif diff --git a/Marlin/src/inc/Warnings.cpp b/Marlin/src/inc/Warnings.cpp index 5e7aba3421..a210c1b0fc 100644 --- a/Marlin/src/inc/Warnings.cpp +++ b/Marlin/src/inc/Warnings.cpp @@ -475,3 +475,8 @@ #warning "Auto-assigned K_DIAG_PIN to E7_DIAG_PIN." #endif #endif + +// Ender 3 Pro (but, apparently all Creality 4.2.2 boards) +#if ENABLED(EMIT_CREALITY_422_WARNING) || MB(CREALITY_V4) + #warning "Creality 4.2.2 boards may have A4988 or TMC2208_STANDALONE drivers. Check your board and make sure to select the correct DRIVER_TYPE!" +#endif diff --git a/Marlin/src/pins/pinsDebug_list.h b/Marlin/src/pins/pinsDebug_list.h index 8a4350d90e..50304648ab 100644 --- a/Marlin/src/pins/pinsDebug_list.h +++ b/Marlin/src/pins/pinsDebug_list.h @@ -74,6 +74,16 @@ REPORT_NAME_ANALOG(__LINE__, MAIN_VOLTAGE_MEASURE_PIN) #endif #endif +#if PIN_EXISTS(POWER_MONITOR_CURRENT) + #if ANALOG_OK(POWER_MONITOR_CURRENT_PIN) + REPORT_NAME_ANALOG(__LINE__, POWER_MONITOR_CURRENT_PIN) + #endif +#endif +#if PIN_EXISTS(POWER_MONITOR_VOLTAGE) + #if ANALOG_OK(POWER_MONITOR_VOLTAGE_PIN) + REPORT_NAME_ANALOG(__LINE__, POWER_MONITOR_VOLTAGE_PIN) + #endif +#endif #if !defined(ARDUINO_ARCH_SAM) && !defined(ARDUINO_ARCH_SAMD) // TC1 & TC2 are macros in the SAM/SAMD tool chain #if _EXISTS(TC1) #if ANALOG_OK(TC1) @@ -131,6 +141,11 @@ REPORT_NAME_ANALOG(__LINE__, TEMP_BED_PIN) #endif #endif +#if PIN_EXISTS(TEMP_BOARD) + #if ANALOG_OK(TEMP_BOARD_PIN) + REPORT_NAME_ANALOG(__LINE__, TEMP_BOARD_PIN) + #endif +#endif #if PIN_EXISTS(TEMP_CHAMBER) #if ANALOG_OK(TEMP_CHAMBER_PIN) REPORT_NAME_ANALOG(__LINE__, TEMP_CHAMBER_PIN) @@ -141,6 +156,11 @@ REPORT_NAME_ANALOG(__LINE__, TEMP_COOLER_PIN) #endif #endif +#if PIN_EXISTS(TEMP_PROBE) + #if ANALOG_OK(TEMP_PROBE_PIN) + REPORT_NAME_ANALOG(__LINE__, TEMP_PROBE_PIN) + #endif +#endif #if PIN_EXISTS(ADC_KEYPAD) #if ANALOG_OK(ADC_KEYPAD_PIN) REPORT_NAME_ANALOG(__LINE__, ADC_KEYPAD_PIN) @@ -370,6 +390,9 @@ #if PIN_EXISTS(DIGIPOTSS) REPORT_NAME_DIGITAL(__LINE__, DIGIPOTSS_PIN) #endif +#if PIN_EXISTS(LCD_RESET) + REPORT_NAME_DIGITAL(__LINE__, LCD_RESET_PIN) +#endif #if _EXISTS(DOGLCD_A0) REPORT_NAME_DIGITAL(__LINE__, DOGLCD_A0) #endif @@ -433,6 +456,9 @@ #if PIN_EXISTS(E0_STEP) REPORT_NAME_DIGITAL(__LINE__, E0_STEP_PIN) #endif +#if PIN_EXISTS(E0_STDBY) + REPORT_NAME_DIGITAL(__LINE__, E0_STDBY_PIN) +#endif #if PIN_EXISTS(E1_AUTO_FAN) REPORT_NAME_DIGITAL(__LINE__, E1_AUTO_FAN_PIN) #endif @@ -457,6 +483,9 @@ #if PIN_EXISTS(E1_STEP) REPORT_NAME_DIGITAL(__LINE__, E1_STEP_PIN) #endif +#if PIN_EXISTS(E1_STDBY) + REPORT_NAME_DIGITAL(__LINE__, E1_STDBY_PIN) +#endif #if PIN_EXISTS(E2_AUTO_FAN) REPORT_NAME_DIGITAL(__LINE__, E2_AUTO_FAN_PIN) #endif @@ -481,6 +510,9 @@ #if PIN_EXISTS(E2_STEP) REPORT_NAME_DIGITAL(__LINE__, E2_STEP_PIN) #endif +#if PIN_EXISTS(E2_STDBY) + REPORT_NAME_DIGITAL(__LINE__, E2_STDBY_PIN) +#endif #if PIN_EXISTS(E3_AUTO_FAN) REPORT_NAME_DIGITAL(__LINE__, E3_AUTO_FAN_PIN) #endif @@ -505,6 +537,9 @@ #if PIN_EXISTS(E3_STEP) REPORT_NAME_DIGITAL(__LINE__, E3_STEP_PIN) #endif +#if PIN_EXISTS(E3_STDBY) + REPORT_NAME_DIGITAL(__LINE__, E3_STDBY_PIN) +#endif #if PIN_EXISTS(E4_AUTO_FAN) REPORT_NAME_DIGITAL(__LINE__, E4_AUTO_FAN_PIN) #endif @@ -529,6 +564,9 @@ #if PIN_EXISTS(E4_STEP) REPORT_NAME_DIGITAL(__LINE__, E4_STEP_PIN) #endif +#if PIN_EXISTS(E4_STDBY) + REPORT_NAME_DIGITAL(__LINE__, E4_STDBY_PIN) +#endif #if PIN_EXISTS(E5_AUTO_FAN) REPORT_NAME_DIGITAL(__LINE__, E5_AUTO_FAN_PIN) #endif @@ -553,6 +591,9 @@ #if PIN_EXISTS(E5_STEP) REPORT_NAME_DIGITAL(__LINE__, E5_STEP_PIN) #endif +#if PIN_EXISTS(E5_STDBY) + REPORT_NAME_DIGITAL(__LINE__, E5_STDBY_PIN) +#endif #if PIN_EXISTS(E6_AUTO_FAN) REPORT_NAME_DIGITAL(__LINE__, E6_AUTO_FAN_PIN) #endif @@ -577,6 +618,9 @@ #if PIN_EXISTS(E6_STEP) REPORT_NAME_DIGITAL(__LINE__, E6_STEP_PIN) #endif +#if PIN_EXISTS(E6_STDBY) + REPORT_NAME_DIGITAL(__LINE__, E6_STDBY_PIN) +#endif #if PIN_EXISTS(E7_AUTO_FAN) REPORT_NAME_DIGITAL(__LINE__, E7_AUTO_FAN_PIN) #endif @@ -601,6 +645,9 @@ #if PIN_EXISTS(E7_STEP) REPORT_NAME_DIGITAL(__LINE__, E7_STEP_PIN) #endif +#if PIN_EXISTS(E7_STDBY) + REPORT_NAME_DIGITAL(__LINE__, E7_STDBY_PIN) +#endif #if _EXISTS(ENET_CRS) REPORT_NAME_DIGITAL(__LINE__, ENET_CRS) #endif @@ -704,6 +751,9 @@ #if PIN_EXISTS(POWER_LOSS) REPORT_NAME_DIGITAL(__LINE__, POWER_LOSS_PIN) #endif +#if PIN_EXISTS(SAFE_POWER) + REPORT_NAME_DIGITAL(__LINE__, SAFE_POWER_PIN) +#endif #if PIN_EXISTS(FIL_RUNOUT) REPORT_NAME_DIGITAL(__LINE__, FIL_RUNOUT_PIN) #endif @@ -806,6 +856,15 @@ #if PIN_EXISTS(LED) REPORT_NAME_DIGITAL(__LINE__, LED_PIN) #endif +#if PIN_EXISTS(LED2) + REPORT_NAME_DIGITAL(__LINE__, LED2_PIN) +#endif +#if PIN_EXISTS(LED3) + REPORT_NAME_DIGITAL(__LINE__, LED3_PIN) +#endif +#if PIN_EXISTS(LED4) + REPORT_NAME_DIGITAL(__LINE__, LED4_PIN) +#endif #if PIN_EXISTS(LED_RED) REPORT_NAME_DIGITAL(__LINE__, LED_RED_PIN) #endif @@ -870,6 +929,12 @@ #if PIN_EXISTS(MOTOR_CURRENT_PWM_E) REPORT_NAME_DIGITAL(__LINE__, MOTOR_CURRENT_PWM_E_PIN) #endif +#if PIN_EXISTS(MOTOR_CURRENT_PWM_E0) + REPORT_NAME_DIGITAL(__LINE__, MOTOR_CURRENT_PWM_E0_PIN) +#endif +#if PIN_EXISTS(MOTOR_CURRENT_PWM_E1) + REPORT_NAME_DIGITAL(__LINE__, MOTOR_CURRENT_PWM_E1_PIN) +#endif #if PIN_EXISTS(MOTOR_CURRENT_PWM_X) REPORT_NAME_DIGITAL(__LINE__, MOTOR_CURRENT_PWM_X_PIN) #endif @@ -1155,6 +1220,9 @@ #if PIN_EXISTS(X_STEP) REPORT_NAME_DIGITAL(__LINE__, X_STEP_PIN) #endif +#if PIN_EXISTS(X_STDBY) + REPORT_NAME_DIGITAL(__LINE__, X_STDBY_PIN) +#endif #if PIN_EXISTS(X_STOP) REPORT_NAME_DIGITAL(__LINE__, X_STOP_PIN) #endif @@ -1218,6 +1286,9 @@ #if PIN_EXISTS(Y_STEP) REPORT_NAME_DIGITAL(__LINE__, Y_STEP_PIN) #endif +#if PIN_EXISTS(Y_STDBY) + REPORT_NAME_DIGITAL(__LINE__, Y_STDBY_PIN) +#endif #if PIN_EXISTS(Y_STOP) REPORT_NAME_DIGITAL(__LINE__, Y_STOP_PIN) #endif @@ -1281,6 +1352,9 @@ #if PIN_EXISTS(Z_STEP) REPORT_NAME_DIGITAL(__LINE__, Z_STEP_PIN) #endif +#if PIN_EXISTS(Z_STDBY) + REPORT_NAME_DIGITAL(__LINE__, Z_STDBY_PIN) +#endif #if PIN_EXISTS(Z_STOP) REPORT_NAME_DIGITAL(__LINE__, Z_STOP_PIN) #endif @@ -1299,6 +1373,9 @@ #if PIN_EXISTS(Z2_MIN) REPORT_NAME_DIGITAL(__LINE__, Z2_MIN_PIN) #endif +#if PIN_EXISTS(Z2_DIAG) + REPORT_NAME_DIGITAL(__LINE__, Z2_DIAG_PIN) +#endif #if PIN_EXISTS(Z2_MS1) REPORT_NAME_DIGITAL(__LINE__, Z2_MS1_PIN) #endif @@ -1311,6 +1388,9 @@ #if PIN_EXISTS(Z2_STEP) REPORT_NAME_DIGITAL(__LINE__, Z2_STEP_PIN) #endif +#if PIN_EXISTS(Z2_STOP) + REPORT_NAME_DIGITAL(__LINE__, Z2_STOP_PIN) +#endif #if PIN_EXISTS(Z3_CS) REPORT_NAME_DIGITAL(__LINE__, Z3_CS_PIN) #endif @@ -1593,6 +1673,24 @@ #if PIN_EXISTS(E7_SERIAL_RX) REPORT_NAME_DIGITAL(__LINE__, E7_SERIAL_RX_PIN) #endif +#if PIN_EXISTS(I_SERIAL_TX) + REPORT_NAME_DIGITAL(__LINE__, I_SERIAL_TX_PIN) +#endif +#if PIN_EXISTS(I_SERIAL_RX) + REPORT_NAME_DIGITAL(__LINE__, I_SERIAL_RX_PIN) +#endif +#if PIN_EXISTS(J_SERIAL_TX) + REPORT_NAME_DIGITAL(__LINE__, J_SERIAL_TX_PIN) +#endif +#if PIN_EXISTS(J_SERIAL_RX) + REPORT_NAME_DIGITAL(__LINE__, J_SERIAL_RX_PIN) +#endif +#if PIN_EXISTS(K_SERIAL_TX) + REPORT_NAME_DIGITAL(__LINE__, K_SERIAL_TX_PIN) +#endif +#if PIN_EXISTS(K_SERIAL_RX) + REPORT_NAME_DIGITAL(__LINE__, K_SERIAL_RX_PIN) +#endif #if PIN_EXISTS(L6470_CHAIN_SCK) REPORT_NAME_DIGITAL(__LINE__, L6470_CHAIN_SCK_PIN) #endif diff --git a/Marlin/src/pins/pins_postprocess.h b/Marlin/src/pins/pins_postprocess.h index 4860e2d800..869541e3ba 100644 --- a/Marlin/src/pins/pins_postprocess.h +++ b/Marlin/src/pins/pins_postprocess.h @@ -1260,22 +1260,22 @@ // Disable unused endstop / probe pins // #define _STOP_IN_USE(N) (X2_USE_ENDSTOP == N || Y2_USE_ENDSTOP == N || Z2_USE_ENDSTOP == N || Z3_USE_ENDSTOP == N || Z4_USE_ENDSTOP == N) -#if _STOP_IN_USE(_XMAX_) +#if !defined(USE_XMAX_PLUG) && _STOP_IN_USE(_XMAX_) #define USE_XMAX_PLUG #endif -#if _STOP_IN_USE(_YMAX_) +#if !defined(USE_YMAX_PLUG) && _STOP_IN_USE(_YMAX_) #define USE_YMAX_PLUG #endif -#if _STOP_IN_USE(_ZMAX_) +#if !defined(USE_ZMAX_PLUG) && _STOP_IN_USE(_ZMAX_) #define USE_ZMAX_PLUG #endif -#if _STOP_IN_USE(_XMIN_) +#if !defined(USE_XMIN_PLUG) && _STOP_IN_USE(_XMIN_) #define USE_XMIN_PLUG #endif -#if _STOP_IN_USE(_YMIN_) +#if !defined(USE_YMIN_PLUG) && _STOP_IN_USE(_YMIN_) #define USE_YMIN_PLUG #endif -#if _STOP_IN_USE(_ZMIN_) +#if !defined(USE_ZMIN_PLUG) && _STOP_IN_USE(_ZMIN_) #define USE_ZMIN_PLUG #endif #undef _STOP_IN_USE diff --git a/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h b/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h index 6b6f644159..12261c3a7b 100644 --- a/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h +++ b/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h @@ -128,7 +128,7 @@ #define Y_SERIAL_TX_PIN PE14 #endif #ifndef Y_SERIAL_RX_PIN - #define Y_SERIAL_RX_PIN PE13 + #define Y_SERIAL_RX_PIN PC4 #endif #ifndef Z_SERIAL_TX_PIN #define Z_SERIAL_TX_PIN PD11