Rename ultralcd => marlinui

Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_st7920_sw_spi.cpp

@@ -145,7 +145,7 @@ uint8_t u8g_com_HAL_DUE_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_va
 }
 
 #if ENABLED(LIGHTWEIGHT_UI)
-  #include "../../../lcd/ultralcd.h"
+  #include "../../../lcd/marlinui.h"
   #include "../../shared/HAL_ST7920.h"
 
   #define ST7920_CS_PIN LCD_PINS_RS

Marlin/src/MarlinCore.cpp

@@ -59,7 +59,7 @@
 
 #include "sd/cardreader.h"
 
-#include "lcd/ultralcd.h"
+#include "lcd/marlinui.h"
 #if HAS_TOUCH_XPT2046
   #include "lcd/touch/touch_buttons.h"
 #endif

Marlin/src/feature/bedlevel/bedlevel.cpp

@@ -36,7 +36,7 @@
 #endif
 
 #if ENABLED(LCD_BED_LEVELING)
-  #include "../../lcd/ultralcd.h"
+  #include "../../lcd/marlinui.h"
 #endif
 
 #define DEBUG_OUT ENABLED(DEBUG_LEVELING_FEATURE)

Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp

@@ -30,7 +30,7 @@
   #include "../../../HAL/shared/eeprom_api.h"
   #include "../../../libs/hex_print.h"
   #include "../../../module/settings.h"
-  #include "../../../lcd/ultralcd.h"
+  #include "../../../lcd/marlinui.h"
   #include "../../../module/stepper.h"
   #include "../../../module/planner.h"
   #include "../../../module/motion.h"

Marlin/src/feature/cancel_object.cpp

@@ -25,7 +25,7 @@
 
 #include "cancel_object.h"
 #include "../gcode/gcode.h"
-#include "../lcd/ultralcd.h"
+#include "../lcd/marlinui.h"
 
 CancelObject cancelable;
 

Marlin/src/feature/hotend_idle.cpp

@@ -34,7 +34,7 @@
 
 #include "../module/temperature.h"
 #include "../module/motion.h"
-#include "../lcd/ultralcd.h"
+#include "../lcd/marlinui.h"
 
 extern HotendIdleProtection hotend_idle;
 

Marlin/src/feature/mmu2/mmu2.cpp

@@ -30,7 +30,7 @@
 MMU2 mmu2;
 
 #include "../../gcode/gcode.h"
-#include "../../lcd/ultralcd.h"
+#include "../../lcd/marlinui.h"
 #include "../../libs/buzzer.h"
 #include "../../libs/nozzle.h"
 #include "../../module/temperature.h"

Marlin/src/feature/password/password.h

@@ -21,7 +21,7 @@
  */
 #pragma once
 
-#include "../../lcd/ultralcd.h"
+#include "../../lcd/marlinui.h"
 
 class Password {
 public:

Marlin/src/feature/pause.cpp

@@ -55,7 +55,7 @@
   #include "../lcd/extui/ui_api.h"
 #endif
 
-#include "../lcd/ultralcd.h"
+#include "../lcd/marlinui.h"
 
 #if HAS_BUZZER
   #include "../libs/buzzer.h"

Marlin/src/feature/power_monitor.cpp

@@ -26,7 +26,7 @@
 
 #include "power_monitor.h"
 
-#include "../lcd/ultralcd.h"
+#include "../lcd/marlinui.h"
 #include "../lcd/lcdprint.h"
 #include "../libs/numtostr.h"
 

Marlin/src/feature/powerloss.cpp

@@ -45,7 +45,7 @@ uint32_t PrintJobRecovery::cmd_sdpos, // = 0
 #endif
 
 #include "../sd/cardreader.h"
-#include "../lcd/ultralcd.h"
+#include "../lcd/marlinui.h"
 #include "../gcode/queue.h"
 #include "../gcode/gcode.h"
 #include "../module/motion.h"

Marlin/src/feature/tmc_util.h

@@ -22,7 +22,7 @@
 #pragma once
 
 #include "../inc/MarlinConfig.h"
-#include "../lcd/ultralcd.h"
+#include "../lcd/marlinui.h"
 
 #if HAS_TRINAMIC_CONFIG
 

Marlin/src/gcode/bedlevel/G26.cpp

@@ -111,7 +111,7 @@
 #include "../../module/motion.h"
 #include "../../module/tool_change.h"
 #include "../../module/temperature.h"
-#include "../../lcd/ultralcd.h"
+#include "../../lcd/marlinui.h"
 
 #define EXTRUSION_MULTIPLIER 1.0
 #define PRIME_LENGTH 10.0

Marlin/src/gcode/bedlevel/abl/G29.cpp

@@ -42,7 +42,7 @@
 #endif
 
 #if HAS_DISPLAY
-  #include "../../../lcd/ultralcd.h"
+  #include "../../../lcd/marlinui.h"
 #endif
 
 #if ENABLED(AUTO_BED_LEVELING_LINEAR)

Marlin/src/gcode/bedlevel/mbl/G29.cpp

@@ -34,7 +34,7 @@
 #include "../../queue.h"
 
 #include "../../../libs/buzzer.h"
-#include "../../../lcd/ultralcd.h"
+#include "../../../lcd/marlinui.h"
 #include "../../../module/motion.h"
 #include "../../../module/stepper.h"
 

Marlin/src/gcode/calibrate/G28.cpp

@@ -45,7 +45,7 @@
   #include "../../feature/bltouch.h"
 #endif
 
-#include "../../lcd/ultralcd.h"
+#include "../../lcd/marlinui.h"
 #if ENABLED(DWIN_CREALITY_LCD)
   #include "../../lcd/dwin/e3v2/dwin.h"
 #endif

Marlin/src/gcode/calibrate/G33.cpp

@@ -29,7 +29,7 @@
 #include "../../module/motion.h"
 #include "../../module/stepper.h"
 #include "../../module/endstops.h"
-#include "../../lcd/ultralcd.h"
+#include "../../lcd/marlinui.h"
 
 #if HAS_BED_PROBE
   #include "../../module/probe.h"

Marlin/src/gcode/calibrate/G425.cpp

@@ -30,7 +30,7 @@
   #include "../../feature/backlash.h"
 #endif
 
-#include "../../lcd/ultralcd.h"
+#include "../../lcd/marlinui.h"
 #include "../../module/motion.h"
 #include "../../module/planner.h"
 #include "../../module/tool_change.h"

Marlin/src/gcode/calibrate/G76_M192_M871.cpp

@@ -37,7 +37,7 @@
 #include "../../module/probe.h"
 #include "../../feature/probe_temp_comp.h"
 
-#include "../../lcd/ultralcd.h"
+#include "../../lcd/marlinui.h"
 #include "../../MarlinCore.h" // for wait_for_heatup and idle()
 
 #if ENABLED(PRINTJOB_TIMER_AUTOSTART)

Marlin/src/gcode/calibrate/M48.cpp

@@ -27,7 +27,7 @@
 #include "../gcode.h"
 #include "../../module/motion.h"
 #include "../../module/probe.h"
-#include "../../lcd/ultralcd.h"
+#include "../../lcd/marlinui.h"
 
 #include "../../feature/bedlevel/bedlevel.h"
 

Marlin/src/gcode/config/M43.cpp

@@ -47,7 +47,7 @@
 #endif
 
 #if HAS_RESUME_CONTINUE
-  #include "../../lcd/ultralcd.h"
+  #include "../../lcd/marlinui.h"
 #endif
 
 #ifndef GET_PIN_MAP_PIN_M43

Marlin/src/gcode/control/M17_M18_M84.cpp

@@ -22,7 +22,7 @@
 
 #include "../gcode.h"
 #include "../../MarlinCore.h" // for stepper_inactive_time, disable_e_steppers
-#include "../../lcd/ultralcd.h"
+#include "../../lcd/marlinui.h"
 #include "../../module/stepper.h"
 
 #if ENABLED(AUTO_BED_LEVELING_UBL)

Marlin/src/gcode/control/M80_M81.cpp

@@ -25,7 +25,7 @@
 #include "../../module/temperature.h"
 #include "../../module/planner.h"       // for planner.finish_and_disable
 #include "../../module/printcounter.h"  // for print_job_timer.stop
-#include "../../lcd/ultralcd.h"         // for LCD_MESSAGEPGM_P
+#include "../../lcd/marlinui.h"         // for LCD_MESSAGEPGM_P
 
 #include "../../inc/MarlinConfig.h"
 

Marlin/src/gcode/control/M999.cpp

@@ -22,7 +22,7 @@
 
 #include "../gcode.h"
 
-#include "../../lcd/ultralcd.h" // for lcd_reset_alert_level
+#include "../../lcd/marlinui.h" // for lcd_reset_alert_level
 #include "../../MarlinCore.h"   // for marlin_state
 #include "../queue.h"           // for flush_and_request_resend
 

Marlin/src/gcode/feature/pause/M125.cpp

@@ -32,7 +32,7 @@
 #include "../../../module/printcounter.h"
 
 #if HAS_LCD_MENU
-  #include "../../../lcd/ultralcd.h"
+  #include "../../../lcd/marlinui.h"
 #endif
 
 #if ENABLED(POWER_LOSS_RECOVERY)

Marlin/src/gcode/feature/pause/M600.cpp

@@ -34,7 +34,7 @@
 #endif
 
 #if HAS_LCD_MENU
-  #include "../../../lcd/ultralcd.h"
+  #include "../../../lcd/marlinui.h"
 #endif
 
 #if ENABLED(MMU2_MENUS)

Marlin/src/gcode/feature/pause/M701_M702.cpp

@@ -35,7 +35,7 @@
 #endif
 
 #if HAS_LCD_MENU
-  #include "../../../lcd/ultralcd.h"
+  #include "../../../lcd/marlinui.h"
 #endif
 
 #if ENABLED(PRUSA_MMU2)

Marlin/src/gcode/feature/powerloss/M1000.cpp

@@ -27,7 +27,7 @@
 #include "../../gcode.h"
 #include "../../../feature/powerloss.h"
 #include "../../../module/motion.h"
-#include "../../../lcd/ultralcd.h"
+#include "../../../lcd/marlinui.h"
 #if ENABLED(EXTENSIBLE_UI)
   #include "../../../lcd/extui/ui_api.h"
 #endif

Marlin/src/gcode/feature/powerloss/M413.cpp

@@ -27,7 +27,7 @@
 #include "../../gcode.h"
 #include "../../../feature/powerloss.h"
 #include "../../../module/motion.h"
-#include "../../../lcd/ultralcd.h"
+#include "../../../lcd/marlinui.h"
 
 /**
  * M413: Enable / Disable power-loss recovery

Marlin/src/gcode/geometry/M206_M428.cpp

@@ -26,7 +26,7 @@
 
 #include "../gcode.h"
 #include "../../module/motion.h"
-#include "../../lcd/ultralcd.h"
+#include "../../lcd/marlinui.h"
 #include "../../libs/buzzer.h"
 
 /**

Marlin/src/gcode/lcd/M0_M1.cpp

@@ -32,7 +32,7 @@
 #include "../../MarlinCore.h"     // for wait_for_user_response()
 
 #if HAS_LCD_MENU
-  #include "../../lcd/ultralcd.h"
+  #include "../../lcd/marlinui.h"
 #elif ENABLED(EXTENSIBLE_UI)
   #include "../../lcd/extui/ui_api.h"
 #endif

Marlin/src/gcode/lcd/M117.cpp

@@ -21,7 +21,7 @@
  */
 
 #include "../gcode.h"
-#include "../../lcd/ultralcd.h"
+#include "../../lcd/marlinui.h"
 
 /**
  * M117: Set LCD Status Message

Marlin/src/gcode/lcd/M145.cpp

@@ -25,7 +25,7 @@
 #if PREHEAT_COUNT
 
 #include "../gcode.h"
-#include "../../lcd/ultralcd.h"
+#include "../../lcd/marlinui.h"
 
 /**
  * M145: Set the heatup state for a material in the LCD menu

Marlin/src/gcode/lcd/M250.cpp

@@ -25,7 +25,7 @@
 #if HAS_LCD_CONTRAST
 
 #include "../gcode.h"
-#include "../../lcd/ultralcd.h"
+#include "../../lcd/marlinui.h"
 
 /**
  * M250: Read and optionally set the LCD contrast

Marlin/src/gcode/lcd/M300.cpp

@@ -26,7 +26,7 @@
 
 #include "../gcode.h"
 
-#include "../../lcd/ultralcd.h" // i2c-based BUZZ
+#include "../../lcd/marlinui.h" // i2c-based BUZZ
 #include "../../libs/buzzer.h"  // Buzzer, if possible
 
 /**

Marlin/src/gcode/lcd/M73.cpp

@@ -25,7 +25,7 @@
 #if ENABLED(LCD_SET_PROGRESS_MANUALLY)
 
 #include "../gcode.h"
-#include "../../lcd/ultralcd.h"
+#include "../../lcd/marlinui.h"
 #include "../../sd/cardreader.h"
 
 /**

Marlin/src/gcode/motion/G4.cpp

@@ -22,7 +22,7 @@
 
 #include "../gcode.h"
 #include "../../module/stepper.h"
-#include "../../lcd/ultralcd.h"
+#include "../../lcd/marlinui.h"
 
 /**
  * G4: Dwell S<seconds> or P<milliseconds>

Marlin/src/gcode/queue.cpp

@@ -29,7 +29,7 @@ GCodeQueue queue;
 
 #include "gcode.h"
 
-#include "../lcd/ultralcd.h"
+#include "../lcd/marlinui.h"
 #include "../sd/cardreader.h"
 #include "../module/planner.h"
 #include "../module/temperature.h"

Marlin/src/gcode/sd/M1001.cpp

@@ -32,7 +32,7 @@
 #endif
 
 #if EITHER(LCD_SET_PROGRESS_MANUALLY, SD_REPRINT_LAST_SELECTED_FILE)
-  #include "../../lcd/ultralcd.h"
+  #include "../../lcd/marlinui.h"
 #endif
 
 #if ENABLED(POWER_LOSS_RECOVERY)

Marlin/src/gcode/sd/M23.cpp

@@ -26,7 +26,7 @@
 
 #include "../gcode.h"
 #include "../../sd/cardreader.h"
-#include "../../lcd/ultralcd.h"
+#include "../../lcd/marlinui.h"
 
 /**
  * M23: Open a file

Marlin/src/gcode/sd/M24_M25.cpp

@@ -27,7 +27,7 @@
 #include "../gcode.h"
 #include "../../sd/cardreader.h"
 #include "../../module/printcounter.h"
-#include "../../lcd/ultralcd.h"
+#include "../../lcd/marlinui.h"
 
 #if ENABLED(PARK_HEAD_ON_PAUSE)
   #include "../../feature/pause.h"

Marlin/src/gcode/stats/M31.cpp

@@ -24,7 +24,7 @@
 #include "../../core/serial.h"
 #include "../../module/printcounter.h"
 #include "../../libs/duration_t.h"
-#include "../../lcd/ultralcd.h"
+#include "../../lcd/marlinui.h"
 
 /**
  * M31: Get the time since the start of SD Print (or last M109)

Marlin/src/gcode/stats/M75-M78.cpp

@@ -22,7 +22,7 @@
 
 #include "../gcode.h"
 #include "../../module/printcounter.h"
-#include "../../lcd/ultralcd.h"
+#include "../../lcd/marlinui.h"
 
 #include "../../MarlinCore.h" // for startOrResumeJob
 

Marlin/src/gcode/temp/M104_M109.cpp

@@ -34,7 +34,7 @@
 #include "../../module/temperature.h"
 #include "../../module/motion.h"
 #include "../../module/planner.h"
-#include "../../lcd/ultralcd.h"
+#include "../../lcd/marlinui.h"
 
 #include "../../MarlinCore.h" // for startOrResumeJob, etc.
 

Marlin/src/gcode/temp/M106_M107.cpp

@@ -29,7 +29,7 @@
 #include "../../module/temperature.h"
 
 #if PREHEAT_COUNT
-  #include "../../lcd/ultralcd.h"
+  #include "../../lcd/marlinui.h"
 #endif
 
 #if ENABLED(SINGLENOZZLE)

Marlin/src/gcode/temp/M140_M190.cpp

@@ -33,7 +33,7 @@
 #include "../gcode.h"
 #include "../../module/temperature.h"
 #include "../../module/motion.h"
-#include "../../lcd/ultralcd.h"
+#include "../../lcd/marlinui.h"
 
 #if ENABLED(PRINTJOB_TIMER_AUTOSTART)
   #include "../../module/printcounter.h"

Marlin/src/gcode/temp/M141_M191.cpp

@@ -34,7 +34,7 @@
 #include "../../module/temperature.h"
 
 #include "../../module/motion.h"
-#include "../../lcd/ultralcd.h"
+#include "../../lcd/marlinui.h"
 
 #if ENABLED(PRINTJOB_TIMER_AUTOSTART)
   #include "../../module/printcounter.h"

Marlin/src/gcode/temp/M303.cpp

@@ -25,7 +25,7 @@
 #if HAS_PID_HEATING
 
 #include "../gcode.h"
-#include "../../lcd/ultralcd.h"
+#include "../../lcd/marlinui.h"
 #include "../../module/temperature.h"
 
 #if ENABLED(EXTENSIBLE_UI)

Marlin/src/lcd/HD44780/lcdprint_hd44780.cpp

@@ -16,10 +16,10 @@
 
 #if HAS_MARLINUI_HD44780
 
-#include "../ultralcd.h"
+#include "../marlinui.h"
 #include "../../MarlinCore.h"
 
-#include "ultralcd_HD44780.h"
+#include "marlinui_HD44780.h"
 
 #include <string.h>
 

Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp → Marlin/src/lcd/HD44780/marlinui_HD44780.cpp

@@ -25,14 +25,14 @@
 #if HAS_MARLINUI_HD44780
 
 /**
- * ultralcd_HD44780.cpp
+ * marlinui_HD44780.cpp
  *
  * LCD display implementations for Hitachi HD44780.
  * These are the most common LCD character displays.
  */
 
-#include "ultralcd_HD44780.h"
-#include "../ultralcd.h"
+#include "marlinui_HD44780.h"
+#include "../marlinui.h"
 #include "../../libs/numtostr.h"
 
 #include "../../sd/cardreader.h"

Marlin/src/lcd/TFTGLCD/lcdprint_TFTGLCD.cpp

@@ -37,11 +37,11 @@
 
 #if IS_TFTGLCD_PANEL
 
-#include "../ultralcd.h"
+#include "../marlinui.h"
 #include "../../MarlinCore.h"
 #include "../../libs/numtostr.h"
 
-#include "ultralcd_TFTGLCD.h"
+#include "marlinui_TFTGLCD.h"
 
 #include <string.h>
 

Marlin/src/lcd/TFTGLCD/ultralcd_TFTGLCD.cpp → Marlin/src/lcd/TFTGLCD/marlinui_TFTGLCD.cpp

@@ -25,7 +25,7 @@
 #if IS_TFTGLCD_PANEL
 
 /**
- * ultralcd_TFTGLCD.cpp
+ * marlinui_TFTGLCD.cpp
  *
  * Implementation of the LCD display routines for a TFT GLCD displays with external controller.
  * This display looks like a REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER but has good text font
@@ -42,8 +42,8 @@
   #include <Wire.h>
 #endif
 
-#include "ultralcd_TFTGLCD.h"
-#include "../ultralcd.h"
+#include "marlinui_TFTGLCD.h"
+#include "../marlinui.h"
 #include "../../libs/numtostr.h"
 
 #include "../../sd/cardreader.h"

Marlin/src/lcd/dogm/dogm_Statusscreen.h

@@ -29,7 +29,7 @@
  */
 
 #include "../../inc/MarlinConfig.h"
-#include "ultralcd_DOGM.h"
+#include "marlinui_DOGM.h"
 
 #define BW(N) ((N + 7) / 8)
 

Marlin/src/lcd/dogm/lcdprint_u8g.cpp

@@ -11,9 +11,9 @@
 
 #if HAS_MARLINUI_U8GLIB
 
-#include "ultralcd_DOGM.h"
+#include "marlinui_DOGM.h"
 
-#include "../ultralcd.h"
+#include "../marlinui.h"
 #include "../../MarlinCore.h"
 
 #include "../fontutils.h"

Marlin/src/lcd/dogm/ultralcd_DOGM.cpp → Marlin/src/lcd/dogm/marlinui_DOGM.cpp

@@ -21,7 +21,7 @@
  */
 
 /**
- * lcd/dogm/ultralcd_DOGM.h
+ * lcd/dogm/marlinui_DOGM.h
  *
  * Implementation of the LCD display routines for a DOGM128 graphic display.
  * by STB for ErikZalm/Marlin. Common LCD 128x64 pixel graphic displays.
@@ -39,7 +39,7 @@
 
 #if HAS_MARLINUI_U8GLIB
 
-#include "ultralcd_DOGM.h"
+#include "marlinui_DOGM.h"
 #include "u8g_fontutf8.h"
 
 #if ENABLED(SHOW_BOOTSCREEN)
@@ -49,7 +49,7 @@
 #include "../lcdprint.h"
 #include "../fontutils.h"
 #include "../../libs/numtostr.h"
-#include "../ultralcd.h"
+#include "../marlinui.h"
 
 #include "../../sd/cardreader.h"
 #include "../../module/temperature.h"

Marlin/src/lcd/dogm/ultralcd_DOGM.h → Marlin/src/lcd/dogm/marlinui_DOGM.h

@@ -22,7 +22,7 @@
 #pragma once
 
 /**
- * lcd/dogm/ultralcd_DOGM.h
+ * lcd/dogm/marlinui_DOGM.h
  */
 
 #include "../../inc/MarlinConfigPre.h"

Marlin/src/lcd/dogm/status_screen_DOGM.cpp

@@ -30,8 +30,8 @@
 #if HAS_MARLINUI_U8GLIB && DISABLED(LIGHTWEIGHT_UI)
 
 #include "dogm_Statusscreen.h"
-#include "ultralcd_DOGM.h"
-#include "../ultralcd.h"
+#include "marlinui_DOGM.h"
+#include "../marlinui.h"
 #include "../lcdprint.h"
 #include "../../libs/numtostr.h"
 

Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp

@@ -46,7 +46,7 @@
 
 #include "status_screen_lite_ST7920.h"
 
-#include "../ultralcd.h"
+#include "../marlinui.h"
 #include "../fontutils.h"
 #include "../lcdprint.h"
 #include "../../libs/duration_t.h"

Marlin/src/lcd/dogm/u8g_dev_tft_upscale_from_128x64.cpp

@@ -58,7 +58,7 @@
 #if HAS_MARLINUI_U8GLIB && (PIN_EXISTS(FSMC_CS) || HAS_SPI_GRAPHICAL_TFT)
 
 #include "HAL_LCD_com_defines.h"
-#include "ultralcd_DOGM.h"
+#include "marlinui_DOGM.h"
 
 #include <string.h>
 

Marlin/src/lcd/dwin/e3v2/dwin.cpp

@@ -47,7 +47,7 @@
 #include <string.h>
 
 #include "../../fontutils.h"
-#include "../../ultralcd.h"
+#include "../../marlinui.h"
 
 #include "../../../sd/cardreader.h"
 

Marlin/src/lcd/extui/lib/dgus/fysetc/DGUSDisplayDef.cpp

@@ -35,7 +35,7 @@
 #include "../../../../../module/planner.h"
 
 #include "../../../ui_api.h"
-#include "../../../../ultralcd.h"
+#include "../../../../marlinui.h"
 
 #if ENABLED(DGUS_UI_MOVE_DIS_OPTION)
   uint16_t distanceToMove = 10;

Marlin/src/lcd/extui/lib/dgus/hiprecy/DGUSDisplayDef.cpp

@@ -35,7 +35,7 @@
 #include "../../../../../module/planner.h"
 
 #include "../../../ui_api.h"
-#include "../../../../ultralcd.h"
+#include "../../../../marlinui.h"
 
 #if ENABLED(DGUS_UI_MOVE_DIS_OPTION)
   uint16_t distanceToMove = 10;

Marlin/src/lcd/extui/lib/dgus/origin/DGUSDisplayDef.cpp

@@ -34,7 +34,7 @@
 #include "../../../../../module/motion.h"
 #include "../../../../../module/planner.h"
 
-#include "../../../../ultralcd.h"
+#include "../../../../marlinui.h"
 #include "../../../ui_api.h"
 
 #if ENABLED(DGUS_UI_MOVE_DIS_OPTION)

Marlin/src/lcd/extui/lib/mks_ui/draw_printing.cpp

@@ -41,7 +41,7 @@
   #include "../../../../feature/powerloss.h"
 #endif
 #if BOTH(LCD_SET_PROGRESS_MANUALLY, USE_M73_REMAINING_TIME)
-  #include "../../../ultralcd.h"
+  #include "../../../marlinui.h"
 #endif
 
 extern lv_group_t * g;

Marlin/src/lcd/extui/lib/mks_ui/tft_lvgl_configuration.cpp

@@ -44,7 +44,7 @@
 #include "../../../../inc/MarlinConfig.h"
 
 #include HAL_PATH(../../HAL, tft/xpt2046.h)
-#include "../../../ultralcd.h"
+#include "../../../marlinui.h"
 XPT2046 touch;
 
 #if ENABLED(POWER_LOSS_RECOVERY)

Marlin/src/lcd/extui/lib/mks_ui/wifi_module.cpp

@@ -33,7 +33,7 @@
 #include "../../../../module/temperature.h"
 #include "../../../../gcode/queue.h"
 #include "../../../../gcode/gcode.h"
-#include "../../../../lcd/ultralcd.h"
+#include "../../../../lcd/marlinui.h"
 #include "../../../../sd/cardreader.h"
 #include "../../../../module/planner.h"
 #if ENABLED(POWER_LOSS_RECOVERY)

Marlin/src/lcd/extui/malyan_lcd.cpp

@@ -49,7 +49,7 @@
 
 #include "ui_api.h"
 
-#include "../ultralcd.h"
+#include "../marlinui.h"
 #include "../../sd/cardreader.h"
 #include "../../module/temperature.h"
 #include "../../module/stepper.h"

Marlin/src/lcd/extui/ui_api.cpp

@@ -45,7 +45,7 @@
 
 #if ENABLED(EXTENSIBLE_UI)
 
-#include "../ultralcd.h"
+#include "../marlinui.h"
 #include "../../gcode/queue.h"
 #include "../../module/motion.h"
 #include "../../module/planner.h"
@@ -1053,11 +1053,9 @@ namespace ExtUI {
 
 } // namespace ExtUI
 
-// At the moment, we piggy-back off the ultralcd calls, but this could be cleaned up in the future
+// At the moment we hook into MarlinUI methods, but this could be cleaned up in the future
 
-void MarlinUI::init() {
-  ExtUI::onStartup();
-}
+void MarlinUI::init() { ExtUI::onStartup(); }
 
 void MarlinUI::update() { ExtUI::onIdle(); }
 

Marlin/src/lcd/fontutils.cpp

@@ -10,7 +10,7 @@
 #include "../inc/MarlinConfig.h"
 
 #if HAS_WIRED_LCD
-  #include "ultralcd.h"
+  #include "marlinui.h"
   #include "../MarlinCore.h"
 #endif
 

Marlin/src/lcd/ultralcd.cpp → Marlin/src/lcd/marlinui.cpp

@@ -31,7 +31,7 @@
 #endif
 
 // All displays share the MarlinUI class
-#include "ultralcd.h"
+#include "marlinui.h"
 MarlinUI ui;
 
 #if HAS_DISPLAY
@@ -117,7 +117,7 @@ constexpr uint8_t epps = ENCODER_PULSES_PER_STEP;
 #if HAS_WIRED_LCD
 
 #if HAS_MARLINUI_U8GLIB
-  #include "dogm/ultralcd_DOGM.h"
+  #include "dogm/marlinui_DOGM.h"
 #endif
 
 #include "lcdprint.h"

Marlin/src/lcd/menu/game/game.h

@@ -22,9 +22,9 @@
 #pragma once
 
 #include "../../../inc/MarlinConfigPre.h"
-#include "../../dogm/ultralcd_DOGM.h"
+#include "../../dogm/marlinui_DOGM.h"
 #include "../../lcdprint.h"
-#include "../../ultralcd.h"
+#include "../../marlinui.h"
 
 //#define MUTE_GAMES
 

Marlin/src/lcd/menu/menu.h

@@ -21,7 +21,7 @@
  */
 #pragma once
 
-#include "../ultralcd.h"
+#include "../marlinui.h"
 #include "../../libs/numtostr.h"
 #include "../../inc/MarlinConfig.h"
 

Marlin/src/lcd/menu/menu_item.h

@@ -22,7 +22,7 @@
 #pragma once
 
 #include "menu.h"
-#include "../ultralcd.h"
+#include "../marlinui.h"
 #include "../../gcode/queue.h" // for inject_P
 
 #include "../../inc/MarlinConfigPre.h"

Marlin/src/lcd/menu/menu_touch_screen.cpp

@@ -25,7 +25,7 @@
 #if BOTH(HAS_LCD_MENU, TOUCH_SCREEN_CALIBRATION)
 
 #include "menu_item.h"
-#include "../ultralcd.h"
+#include "../marlinui.h"
 
 void touch_screen_calibration() {
 

Marlin/src/lcd/menu/menu_tune.cpp

@@ -47,7 +47,7 @@
   #include "../../feature/babystep.h"
   #include "../lcdprint.h"
   #if HAS_MARLINUI_U8GLIB
-    #include "../dogm/ultralcd_DOGM.h"
+    #include "../dogm/marlinui_DOGM.h"
   #endif
 
   void _lcd_babystep(const AxisEnum axis, PGM_P const msg) {

Marlin/src/lcd/tft/touch.cpp

@@ -23,7 +23,7 @@
 
 #include "touch.h"
 
-#include "../ultralcd.h"  // for ui methods
+#include "../marlinui.h"  // for ui methods
 #include "../menu/menu_item.h" // for touch_screen_calibration
 
 #include "../../module/temperature.h"

Marlin/src/lcd/tft/ui_320x240.cpp

@@ -26,7 +26,7 @@
 
 #include "ui_320x240.h"
 
-#include "../ultralcd.h"
+#include "../marlinui.h"
 #include "../menu/menu.h"
 #include "../../libs/numtostr.h"
 

Marlin/src/lcd/tft/ui_480x320.cpp

@@ -26,7 +26,7 @@
 
 #include "ui_480x320.h"
 
-#include "../ultralcd.h"
+#include "../marlinui.h"
 #include "../menu/menu.h"
 #include "../../libs/numtostr.h"
 

Marlin/src/lcd/touch/touch_buttons.cpp

@@ -27,7 +27,7 @@
 #include HAL_PATH(../../HAL, tft/xpt2046.h)
 XPT2046 touchIO;
 
-#include "../../lcd/ultralcd.h" // For EN_C bit mask
+#include "../../lcd/marlinui.h" // For EN_C bit mask
 
 /**
  * Draw and Touch processing

Marlin/src/module/delta.cpp

@@ -34,7 +34,7 @@
 // For homing:
 #include "planner.h"
 #include "endstops.h"
-#include "../lcd/ultralcd.h"
+#include "../lcd/marlinui.h"
 #include "../MarlinCore.h"
 
 #if HAS_BED_PROBE

Marlin/src/module/endstops.cpp

@@ -30,7 +30,7 @@
 #include "../MarlinCore.h"
 #include "../sd/cardreader.h"
 #include "temperature.h"
-#include "../lcd/ultralcd.h"
+#include "../lcd/marlinui.h"
 
 #if ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
   #include HAL_PATH(../HAL, endstop_interrupts.h)

Marlin/src/module/motion.cpp

@@ -36,7 +36,7 @@
 
 #if IS_SCARA
   #include "../libs/buzzer.h"
-  #include "../lcd/ultralcd.h"
+  #include "../lcd/marlinui.h"
 #endif
 
 #if HAS_BED_PROBE
@@ -52,7 +52,7 @@
 #endif
 
 #if HAS_DISPLAY
-  #include "../lcd/ultralcd.h"
+  #include "../lcd/marlinui.h"
 #endif
 
 #if HAS_FILAMENT_SENSOR

Marlin/src/module/planner.cpp

@@ -66,7 +66,7 @@
 #include "stepper.h"
 #include "motion.h"
 #include "temperature.h"
-#include "../lcd/ultralcd.h"
+#include "../lcd/marlinui.h"
 #include "../gcode/parser.h"
 
 #include "../MarlinCore.h"

Marlin/src/module/probe.cpp

@@ -36,7 +36,7 @@
 #include "endstops.h"
 
 #include "../gcode/gcode.h"
-#include "../lcd/ultralcd.h"
+#include "../lcd/marlinui.h"
 
 #include "../MarlinCore.h" // for stop(), disable_e_steppers
 

Marlin/src/module/settings.cpp

@@ -54,7 +54,7 @@
   #include "../lcd/dwin/e3v2/dwin.h"
 #endif
 
-#include "../lcd/ultralcd.h"
+#include "../lcd/marlinui.h"
 #include "../libs/vector_3.h"   // for matrix_3x3
 #include "../gcode/gcode.h"
 #include "../MarlinCore.h"

Marlin/src/module/stepper.cpp

@@ -92,7 +92,7 @@ Stepper stepper; // Singleton
 #include "motion.h"
 
 #include "temperature.h"
-#include "../lcd/ultralcd.h"
+#include "../lcd/marlinui.h"
 #include "../gcode/queue.h"
 #include "../sd/cardreader.h"
 #include "../MarlinCore.h"

Marlin/src/module/temperature.cpp

@@ -34,7 +34,7 @@
 #include "planner.h"
 #include "../HAL/shared/Delay.h"
 
-#include "../lcd/ultralcd.h"
+#include "../lcd/marlinui.h"
 
 #if ENABLED(DWIN_CREALITY_LCD)
   #include "../lcd/dwin/e3v2/dwin.h"

Marlin/src/module/tool_change.cpp

@@ -94,7 +94,7 @@
 #endif
 
 #if HAS_LCD_MENU
-  #include "../lcd/ultralcd.h"
+  #include "../lcd/marlinui.h"
 #endif
 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)

Marlin/src/sd/cardreader.cpp

@@ -29,7 +29,7 @@
 #include "cardreader.h"
 
 #include "../MarlinCore.h"
-#include "../lcd/ultralcd.h"
+#include "../lcd/marlinui.h"
 
 #if ENABLED(DWIN_CREALITY_LCD)
   #include "../lcd/dwin/e3v2/dwin.h"

Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp

@@ -94,7 +94,7 @@ static_assert(USB_INTR_PIN != -1, "USB_INTR_PIN must be defined");
 
 #include "Sd2Card_FlashDrive.h"
 
-#include "../../lcd/ultralcd.h"
+#include "../../lcd/marlinui.h"
 
 static enum {
   UNINITIALIZED,