From 1367df2875b4aff41e9c98824e3f7b56f4403e4d Mon Sep 17 00:00:00 2001 From: etagle Date: Sun, 1 Jul 2018 17:20:28 -0300 Subject: [PATCH] Replace double with float, optimize calculation --- Marlin/src/HAL/HAL_AVR/HAL.h | 3 + Marlin/src/HAL/HAL_STM32F7/TMC2660.cpp | 12 +- Marlin/src/Marlin.h | 5 - Marlin/src/core/macros.h | 41 +++--- Marlin/src/core/utility.h | 4 +- Marlin/src/feature/I2CPositionEncoder.cpp | 2 +- Marlin/src/feature/I2CPositionEncoder.h | 4 - .../feature/bedlevel/mbl/mesh_bed_leveling.h | 8 +- Marlin/src/feature/bedlevel/ubl/ubl.h | 12 +- Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp | 6 +- .../src/feature/bedlevel/ubl/ubl_motion.cpp | 22 +-- Marlin/src/feature/dac/stepper_dac.cpp | 4 +- .../src/feature/digipot/digipot_mcp4018.cpp | 2 +- .../src/feature/digipot/digipot_mcp4451.cpp | 2 +- Marlin/src/gcode/calibrate/G33.cpp | 2 +- Marlin/src/gcode/calibrate/M48.cpp | 6 +- Marlin/src/gcode/config/M200-M205.cpp | 6 +- Marlin/src/gcode/config/M92.cpp | 2 +- Marlin/src/gcode/control/M3-M5.cpp | 6 +- Marlin/src/gcode/gcode.cpp | 2 +- Marlin/src/gcode/motion/G2_G3.cpp | 23 ++-- Marlin/src/gcode/parser.h | 28 ++-- Marlin/src/gcode/temperature/M104_M109.cpp | 2 +- Marlin/src/gcode/temperature/M140_M190.cpp | 4 +- Marlin/src/lcd/dogm/status_screen_DOGM.h | 2 +- Marlin/src/lcd/ultralcd.cpp | 128 +++++++++--------- Marlin/src/libs/vector_3.cpp | 2 +- Marlin/src/module/configuration_store.cpp | 12 +- Marlin/src/module/motion.cpp | 18 +-- Marlin/src/module/motion.h | 20 +-- Marlin/src/module/planner.cpp | 60 ++++---- Marlin/src/module/planner.h | 18 +-- Marlin/src/module/planner_bezier.cpp | 28 ++-- Marlin/src/module/printcounter.cpp | 2 +- Marlin/src/module/printcounter.h | 6 +- Marlin/src/module/probe.cpp | 2 +- Marlin/src/module/temperature.cpp | 14 +- Marlin/src/module/temperature.h | 10 +- 38 files changed, 263 insertions(+), 267 deletions(-) diff --git a/Marlin/src/HAL/HAL_AVR/HAL.h b/Marlin/src/HAL/HAL_AVR/HAL.h index 9093910c24..fff12eb709 100644 --- a/Marlin/src/HAL/HAL_AVR/HAL.h +++ b/Marlin/src/HAL/HAL_AVR/HAL.h @@ -353,4 +353,7 @@ inline void HAL_adc_init(void) { #define HAL_SENSITIVE_PINS 0, 1 +// AVR compatibility +#define strtof strtod + #endif // _HAL_AVR_H_ diff --git a/Marlin/src/HAL/HAL_STM32F7/TMC2660.cpp b/Marlin/src/HAL/HAL_STM32F7/TMC2660.cpp index f2d14658eb..71562425b9 100644 --- a/Marlin/src/HAL/HAL_STM32F7/TMC2660.cpp +++ b/Marlin/src/HAL/HAL_STM32F7/TMC2660.cpp @@ -297,8 +297,8 @@ char TMC26XStepper::stop(void) { void TMC26XStepper::setCurrent(unsigned int current) { unsigned char current_scaling = 0; //calculate the current scaling from the max current setting (in mA) - double mASetting = (double)current, - resistor_value = (double)this->resistor; + float mASetting = (float)current, + resistor_value = (float)this->resistor; // remove vsense flag this->driver_configuration_register_value &= ~(VSENSE); // Derived from I = (cs + 1) / 32 * (Vsense / Rsense) @@ -340,8 +340,8 @@ void TMC26XStepper::setCurrent(unsigned int current) { unsigned int TMC26XStepper::getCurrent(void) { // Calculate the current according to the datasheet to be on the safe side. // This is not the fastest but the most accurate and illustrative way. - double result = (double)(stall_guard2_current_register_value & CURRENT_SCALING_PATTERN), - resistor_value = (double)this->resistor, + float result = (float)(stall_guard2_current_register_value & CURRENT_SCALING_PATTERN), + resistor_value = (float)this->resistor, voltage = (driver_configuration_register_value & VSENSE) ? 0.165 : 0.31; result = (result + 1.0) / 32.0 * voltage / resistor_value * sq(1000.0); return (unsigned int)result; @@ -739,8 +739,8 @@ unsigned char TMC26XStepper::getCurrentCSReading(void) { } unsigned int TMC26XStepper::getCurrentCurrent(void) { - double result = (double)getCurrentCSReading(), - resistor_value = (double)this->resistor, + float result = (float)getCurrentCSReading(), + resistor_value = (float)this->resistor, voltage = (driver_configuration_register_value & VSENSE)? 0.165 : 0.31; result = (result + 1.0) / 32.0 * voltage / resistor_value * sq(1000.0); return (unsigned int)result; diff --git a/Marlin/src/Marlin.h b/Marlin/src/Marlin.h index 1259a385c6..7c919f9e03 100644 --- a/Marlin/src/Marlin.h +++ b/Marlin/src/Marlin.h @@ -185,11 +185,6 @@ extern volatile bool wait_for_heatup; extern bool suspend_auto_report; #endif -#if ENABLED(AUTO_BED_LEVELING_UBL) - typedef struct { double A, B, D; } linear_fit; - linear_fit* lsf_linear_fit(double x[], double y[], double z[], const int); -#endif - // Inactivity shutdown timer extern millis_t max_inactive_time, stepper_inactive_time; diff --git a/Marlin/src/core/macros.h b/Marlin/src/core/macros.h index ce464eb4b7..224170bfff 100644 --- a/Marlin/src/core/macros.h +++ b/Marlin/src/core/macros.h @@ -79,15 +79,15 @@ #define CBI32(n,b) (n &= ~_BV32(b)) // Macros for maths shortcuts -#ifndef M_PI - #define M_PI 3.14159265358979323846 -#endif -#define RADIANS(d) ((d)*M_PI/180.0) -#define DEGREES(r) ((r)*180.0/M_PI) +#undef M_PI +#define M_PI 3.14159265358979323846f + +#define RADIANS(d) ((d)*float(M_PI)/180.0f) +#define DEGREES(r) ((r)*180.0f/float(M_PI)) #define HYPOT2(x,y) (sq(x)+sq(y)) -#define CIRCLE_AREA(R) (M_PI * sq(R)) -#define CIRCLE_CIRC(R) (2.0 * M_PI * (R)) +#define CIRCLE_AREA(R) (float(M_PI) * sq(float(R))) +#define CIRCLE_CIRC(R) (2 * float(M_PI) * float(R)) #define SIGN(a) ((a>0)-(a<0)) #define IS_POWER_OF_2(x) ((x) && !((x) & ((x) - 1))) @@ -200,8 +200,8 @@ #define PENDING(NOW,SOON) ((long)(NOW-(SOON))<0) #define ELAPSED(NOW,SOON) (!PENDING(NOW,SOON)) -#define MMM_TO_MMS(MM_M) ((MM_M)/60.0) -#define MMS_TO_MMM(MM_S) ((MM_S)*60.0) +#define MMM_TO_MMS(MM_M) ((MM_M)/60.0f) +#define MMS_TO_MMM(MM_S) ((MM_S)*60.0f) #define NOOP do{} while(0) @@ -250,23 +250,24 @@ #define MAX4(a, b, c, d) MAX(MAX3(a, b, c), d) #define MAX5(a, b, c, d, e) MAX(MAX4(a, b, c, d), e) -#define UNEAR_ZERO(x) ((x) < 0.000001) -#define NEAR_ZERO(x) WITHIN(x, -0.000001, 0.000001) +#define UNEAR_ZERO(x) ((x) < 0.000001f) +#define NEAR_ZERO(x) WITHIN(x, -0.000001f, 0.000001f) #define NEAR(x,y) NEAR_ZERO((x)-(y)) -#define RECIPROCAL(x) (NEAR_ZERO(x) ? 0.0 : 1.0 / (x)) -#define FIXFLOAT(f) (f + (f < 0.0 ? -0.00005 : 0.00005)) +#define RECIPROCAL(x) (NEAR_ZERO(x) ? 0 : (1 / float(x))) +#define FIXFLOAT(f) (f + (f < 0 ? -0.00005f : 0.00005f)) // // Maths macros that can be overridden by HAL // -#define ATAN2(y, x) atan2(y, x) -#define POW(x, y) pow(x, y) -#define SQRT(x) sqrt(x) -#define CEIL(x) ceil(x) -#define FLOOR(x) floor(x) -#define LROUND(x) lround(x) -#define FMOD(x, y) fmod(x, y) +#define ATAN2(y, x) atan2f(y, x) +#define POW(x, y) powf(x, y) +#define SQRT(x) sqrtf(x) +#define RSQRT(x) (1 / sqrtf(x)) +#define CEIL(x) ceilf(x) +#define FLOOR(x) floorf(x) +#define LROUND(x) lroundf(x) +#define FMOD(x, y) fmodf(x, y) #define HYPOT(x,y) SQRT(HYPOT2(x,y)) #endif //__MACROS_H diff --git a/Marlin/src/core/utility.h b/Marlin/src/core/utility.h index 4f0477884f..f4f2e7cf80 100644 --- a/Marlin/src/core/utility.h +++ b/Marlin/src/core/utility.h @@ -87,14 +87,14 @@ void safe_delay(millis_t ms); char* ftostr62rj(const float &x); // Convert float to rj string with 123 or -12 format - FORCE_INLINE char* ftostr3(const float &x) { return itostr3(int(x + (x < 0 ? -0.5 : 0.5))); } + FORCE_INLINE char* ftostr3(const float &x) { return itostr3(int(x + (x < 0 ? -0.5f : 0.5f))); } #if ENABLED(LCD_DECIMAL_SMALL_XY) // Convert float to rj string with 1234, _123, 12.3, _1.2, -123, _-12, or -1.2 format char* ftostr4sign(const float &fx); #else // Convert float to rj string with 1234, _123, -123, __12, _-12, ___1, or __-1 format - FORCE_INLINE char* ftostr4sign(const float &x) { return itostr4sign(int(x + (x < 0 ? -0.5 : 0.5))); } + FORCE_INLINE char* ftostr4sign(const float &x) { return itostr4sign(int(x + (x < 0 ? -0.5f : 0.5f))); } #endif #endif // ULTRA_LCD diff --git a/Marlin/src/feature/I2CPositionEncoder.cpp b/Marlin/src/feature/I2CPositionEncoder.cpp index 32a598810c..d817f1400c 100644 --- a/Marlin/src/feature/I2CPositionEncoder.cpp +++ b/Marlin/src/feature/I2CPositionEncoder.cpp @@ -181,7 +181,7 @@ void I2CPositionEncoder::update() { if (errPrstIdx >= I2CPE_ERR_PRST_ARRAY_SIZE) { float sumP = 0; LOOP_L_N(i, I2CPE_ERR_PRST_ARRAY_SIZE) sumP += errPrst[i]; - const int32_t errorP = int32_t(sumP * (1.0 / (I2CPE_ERR_PRST_ARRAY_SIZE))); + const int32_t errorP = int32_t(sumP * (1.0f / (I2CPE_ERR_PRST_ARRAY_SIZE))); SERIAL_ECHO(axis_codes[encoderAxis]); SERIAL_ECHOPAIR(" - err detected: ", errorP * planner.steps_to_mm[encoderAxis]); SERIAL_ECHOLNPGM("mm; correcting!"); diff --git a/Marlin/src/feature/I2CPositionEncoder.h b/Marlin/src/feature/I2CPositionEncoder.h index 4ed5c78836..224e0da8b2 100644 --- a/Marlin/src/feature/I2CPositionEncoder.h +++ b/Marlin/src/feature/I2CPositionEncoder.h @@ -133,16 +133,12 @@ class I2CPositionEncoder { nextErrorCountTime = 0, lastErrorTime; - //double positionMm; //calculate - #if ENABLED(I2CPE_ERR_ROLLING_AVERAGE) uint8_t errIdx = 0, errPrstIdx = 0; int err[I2CPE_ERR_ARRAY_SIZE] = { 0 }, errPrst[I2CPE_ERR_PRST_ARRAY_SIZE] = { 0 }; #endif - //float positionMm; //calculate - public: void init(const uint8_t address, const AxisEnum axis); void reset(); diff --git a/Marlin/src/feature/bedlevel/mbl/mesh_bed_leveling.h b/Marlin/src/feature/bedlevel/mbl/mesh_bed_leveling.h index 94dadeccf0..1c6c7c3c26 100644 --- a/Marlin/src/feature/bedlevel/mbl/mesh_bed_leveling.h +++ b/Marlin/src/feature/bedlevel/mbl/mesh_bed_leveling.h @@ -72,22 +72,22 @@ public: } static int8_t cell_index_x(const float &x) { - int8_t cx = (x - (MESH_MIN_X)) * (1.0 / (MESH_X_DIST)); + int8_t cx = (x - (MESH_MIN_X)) * (1.0f / (MESH_X_DIST)); return constrain(cx, 0, (GRID_MAX_POINTS_X) - 2); } static int8_t cell_index_y(const float &y) { - int8_t cy = (y - (MESH_MIN_Y)) * (1.0 / (MESH_Y_DIST)); + int8_t cy = (y - (MESH_MIN_Y)) * (1.0f / (MESH_Y_DIST)); return constrain(cy, 0, (GRID_MAX_POINTS_Y) - 2); } static int8_t probe_index_x(const float &x) { - int8_t px = (x - (MESH_MIN_X) + 0.5 * (MESH_X_DIST)) * (1.0 / (MESH_X_DIST)); + int8_t px = (x - (MESH_MIN_X) + 0.5 * (MESH_X_DIST)) * (1.0f / (MESH_X_DIST)); return WITHIN(px, 0, GRID_MAX_POINTS_X - 1) ? px : -1; } static int8_t probe_index_y(const float &y) { - int8_t py = (y - (MESH_MIN_Y) + 0.5 * (MESH_Y_DIST)) * (1.0 / (MESH_Y_DIST)); + int8_t py = (y - (MESH_MIN_Y) + 0.5 * (MESH_Y_DIST)) * (1.0f / (MESH_Y_DIST)); return WITHIN(py, 0, GRID_MAX_POINTS_Y - 1) ? py : -1; } diff --git a/Marlin/src/feature/bedlevel/ubl/ubl.h b/Marlin/src/feature/bedlevel/ubl/ubl.h index eb88234823..cbd5ed4bf6 100644 --- a/Marlin/src/feature/bedlevel/ubl/ubl.h +++ b/Marlin/src/feature/bedlevel/ubl/ubl.h @@ -168,14 +168,14 @@ class unified_bed_leveling { FORCE_INLINE static void set_z(const int8_t px, const int8_t py, const float &z) { z_values[px][py] = z; } static int8_t get_cell_index_x(const float &x) { - const int8_t cx = (x - (MESH_MIN_X)) * (1.0 / (MESH_X_DIST)); + const int8_t cx = (x - (MESH_MIN_X)) * (1.0f / (MESH_X_DIST)); return constrain(cx, 0, (GRID_MAX_POINTS_X) - 1); // -1 is appropriate if we want all movement to the X_MAX } // position. But with this defined this way, it is possible // to extrapolate off of this point even further out. Probably // that is OK because something else should be keeping that from // happening and should not be worried about at this level. static int8_t get_cell_index_y(const float &y) { - const int8_t cy = (y - (MESH_MIN_Y)) * (1.0 / (MESH_Y_DIST)); + const int8_t cy = (y - (MESH_MIN_Y)) * (1.0f / (MESH_Y_DIST)); return constrain(cy, 0, (GRID_MAX_POINTS_Y) - 1); // -1 is appropriate if we want all movement to the Y_MAX } // position. But with this defined this way, it is possible // to extrapolate off of this point even further out. Probably @@ -183,12 +183,12 @@ class unified_bed_leveling { // happening and should not be worried about at this level. static int8_t find_closest_x_index(const float &x) { - const int8_t px = (x - (MESH_MIN_X) + (MESH_X_DIST) * 0.5) * (1.0 / (MESH_X_DIST)); + const int8_t px = (x - (MESH_MIN_X) + (MESH_X_DIST) * 0.5) * (1.0f / (MESH_X_DIST)); return WITHIN(px, 0, GRID_MAX_POINTS_X - 1) ? px : -1; } static int8_t find_closest_y_index(const float &y) { - const int8_t py = (y - (MESH_MIN_Y) + (MESH_Y_DIST) * 0.5) * (1.0 / (MESH_Y_DIST)); + const int8_t py = (y - (MESH_MIN_Y) + (MESH_Y_DIST) * 0.5) * (1.0f / (MESH_Y_DIST)); return WITHIN(py, 0, GRID_MAX_POINTS_Y - 1) ? py : -1; } @@ -238,7 +238,7 @@ class unified_bed_leveling { ); } - const float xratio = (rx0 - mesh_index_to_xpos(x1_i)) * (1.0 / (MESH_X_DIST)), + const float xratio = (rx0 - mesh_index_to_xpos(x1_i)) * (1.0f / (MESH_X_DIST)), z1 = z_values[x1_i][yi]; return z1 + xratio * (z_values[MIN(x1_i, GRID_MAX_POINTS_X - 2) + 1][yi] - z1); // Don't allow x1_i+1 to be past the end of the array @@ -272,7 +272,7 @@ class unified_bed_leveling { ); } - const float yratio = (ry0 - mesh_index_to_ypos(y1_i)) * (1.0 / (MESH_Y_DIST)), + const float yratio = (ry0 - mesh_index_to_ypos(y1_i)) * (1.0f / (MESH_Y_DIST)), z1 = z_values[xi][y1_i]; return z1 + yratio * (z_values[xi][MIN(y1_i, GRID_MAX_POINTS_Y - 2) + 1] - z1); // Don't allow y1_i+1 to be past the end of the array diff --git a/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp b/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp index c7c0352dfd..956238ba50 100644 --- a/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp +++ b/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp @@ -874,8 +874,8 @@ serialprintPGM(parser.seen('B') ? PSTR(MSG_UBL_BC_INSERT) : PSTR(MSG_UBL_BC_INSERT2)); - const float z_step = 0.01; // existing behavior: 0.01mm per click, occasionally step - //const float z_step = 1.0 / planner.axis_steps_per_mm[Z_AXIS]; // approx one step each click + const float z_step = 0.01; // existing behavior: 0.01mm per click, occasionally step + //const float z_step = planner.steps_to_mm[Z_AXIS]; // approx one step each click move_z_with_encoder(z_step); @@ -1252,7 +1252,7 @@ // last half of the mesh (when every unprobed mesh point is one index // from a probed location). - d1 = HYPOT(i - k, j - l) + (1.0 / ((millis() % 47) + 13)); + d1 = HYPOT(i - k, j - l) + (1.0f / ((millis() % 47) + 13)); if (d1 < d2) { // found a closer distance from invalid mesh point at (i,j) to defined mesh point at (k,l) d2 = d1; // found a closer location with diff --git a/Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp b/Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp index 4900f0e0df..85ed86838e 100644 --- a/Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp +++ b/Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp @@ -102,7 +102,7 @@ FINAL_MOVE: // The distance is always MESH_X_DIST so multiply by the constant reciprocal. - const float xratio = (end[X_AXIS] - mesh_index_to_xpos(cell_dest_xi)) * (1.0 / (MESH_X_DIST)); + const float xratio = (end[X_AXIS] - mesh_index_to_xpos(cell_dest_xi)) * (1.0f / (MESH_X_DIST)); float z1 = z_values[cell_dest_xi ][cell_dest_yi ] + xratio * (z_values[cell_dest_xi + 1][cell_dest_yi ] - z_values[cell_dest_xi][cell_dest_yi ]), @@ -112,7 +112,7 @@ if (cell_dest_xi >= GRID_MAX_POINTS_X - 1) z1 = z2 = 0.0; // X cell-fraction done. Interpolate the two Z offsets with the Y fraction for the final Z offset. - const float yratio = (end[Y_AXIS] - mesh_index_to_ypos(cell_dest_yi)) * (1.0 / (MESH_Y_DIST)), + const float yratio = (end[Y_AXIS] - mesh_index_to_ypos(cell_dest_yi)) * (1.0f / (MESH_Y_DIST)), z0 = cell_dest_yi < GRID_MAX_POINTS_Y - 1 ? (z1 + (z2 - z1) * yratio) * planner.fade_scaling_factor_for_z(end[Z_AXIS]) : 0.0; // Undefined parts of the Mesh in z_values[][] are NAN. @@ -440,14 +440,14 @@ #if IS_KINEMATIC const float seconds = cartesian_xy_mm / feedrate; // seconds to move xy distance at requested rate uint16_t segments = lroundf(delta_segments_per_second * seconds), // preferred number of segments for distance @ feedrate - seglimit = lroundf(cartesian_xy_mm * (1.0 / (DELTA_SEGMENT_MIN_LENGTH))); // number of segments at minimum segment length + seglimit = lroundf(cartesian_xy_mm * (1.0f / (DELTA_SEGMENT_MIN_LENGTH))); // number of segments at minimum segment length NOMORE(segments, seglimit); // limit to minimum segment length (fewer segments) #else - uint16_t segments = lroundf(cartesian_xy_mm * (1.0 / (DELTA_SEGMENT_MIN_LENGTH))); // cartesian fixed segment length + uint16_t segments = lroundf(cartesian_xy_mm * (1.0f / (DELTA_SEGMENT_MIN_LENGTH))); // cartesian fixed segment length #endif NOLESS(segments, 1U); // must have at least one segment - const float inv_segments = 1.0 / segments; // divide once, multiply thereafter + const float inv_segments = 1.0f / segments; // divide once, multiply thereafter #if IS_SCARA // scale the feed rate from mm/s to degrees/s scara_feed_factor = cartesian_xy_mm * inv_segments * feedrate; @@ -500,8 +500,8 @@ // in top of loop and again re-find same adjacent cell and use it, just less efficient // for mesh inset area. - int8_t cell_xi = (raw[X_AXIS] - (MESH_MIN_X)) * (1.0 / (MESH_X_DIST)), - cell_yi = (raw[Y_AXIS] - (MESH_MIN_Y)) * (1.0 / (MESH_Y_DIST)); + int8_t cell_xi = (raw[X_AXIS] - (MESH_MIN_X)) * (1.0f / (MESH_X_DIST)), + cell_yi = (raw[Y_AXIS] - (MESH_MIN_Y)) * (1.0f / (MESH_Y_DIST)); cell_xi = constrain(cell_xi, 0, (GRID_MAX_POINTS_X) - 1); cell_yi = constrain(cell_yi, 0, (GRID_MAX_POINTS_Y) - 1); @@ -522,15 +522,15 @@ float cx = raw[X_AXIS] - x0, // cell-relative x and y cy = raw[Y_AXIS] - y0; - const float z_xmy0 = (z_x1y0 - z_x0y0) * (1.0 / (MESH_X_DIST)), // z slope per x along y0 (lower left to lower right) - z_xmy1 = (z_x1y1 - z_x0y1) * (1.0 / (MESH_X_DIST)); // z slope per x along y1 (upper left to upper right) + const float z_xmy0 = (z_x1y0 - z_x0y0) * (1.0f / (MESH_X_DIST)), // z slope per x along y0 (lower left to lower right) + z_xmy1 = (z_x1y1 - z_x0y1) * (1.0f / (MESH_X_DIST)); // z slope per x along y1 (upper left to upper right) float z_cxy0 = z_x0y0 + z_xmy0 * cx; // z height along y0 at cx (changes for each cx in cell) const float z_cxy1 = z_x0y1 + z_xmy1 * cx, // z height along y1 at cx z_cxyd = z_cxy1 - z_cxy0; // z height difference along cx from y0 to y1 - float z_cxym = z_cxyd * (1.0 / (MESH_Y_DIST)); // z slope per y along cx from y0 to y1 (changes for each cx in cell) + float z_cxym = z_cxyd * (1.0f / (MESH_Y_DIST)); // z slope per y along cx from y0 to y1 (changes for each cx in cell) // float z_cxcy = z_cxy0 + z_cxym * cy; // interpolated mesh z height along cx at cy (do inside the segment loop) @@ -539,7 +539,7 @@ // each change by a constant for fixed segment lengths. const float z_sxy0 = z_xmy0 * diff[X_AXIS], // per-segment adjustment to z_cxy0 - z_sxym = (z_xmy1 - z_xmy0) * (1.0 / (MESH_Y_DIST)) * diff[X_AXIS]; // per-segment adjustment to z_cxym + z_sxym = (z_xmy1 - z_xmy0) * (1.0f / (MESH_Y_DIST)) * diff[X_AXIS]; // per-segment adjustment to z_cxym for (;;) { // for all segments within this mesh cell diff --git a/Marlin/src/feature/dac/stepper_dac.cpp b/Marlin/src/feature/dac/stepper_dac.cpp index 458eb61f1a..b5ea77a029 100644 --- a/Marlin/src/feature/dac/stepper_dac.cpp +++ b/Marlin/src/feature/dac/stepper_dac.cpp @@ -91,8 +91,8 @@ void dac_current_raw(uint8_t channel, uint16_t val) { mcp4728_simpleCommand(UPDATE); } -static float dac_perc(int8_t n) { return 100.0 * mcp4728_getValue(dac_order[n]) * (1.0 / (DAC_STEPPER_MAX)); } -static float dac_amps(int8_t n) { return mcp4728_getDrvPct(dac_order[n]) * (DAC_STEPPER_MAX) * 0.125 * (1.0 / (DAC_STEPPER_SENSE)); } +static float dac_perc(int8_t n) { return 100.0 * mcp4728_getValue(dac_order[n]) * (1.0f / (DAC_STEPPER_MAX)); } +static float dac_amps(int8_t n) { return mcp4728_getDrvPct(dac_order[n]) * (DAC_STEPPER_MAX) * 0.125 * (1.0f / (DAC_STEPPER_SENSE)); } uint8_t dac_current_get_percent(AxisEnum axis) { return mcp4728_getDrvPct(dac_order[axis]); } void dac_current_set_percents(const uint8_t pct[XYZE]) { diff --git a/Marlin/src/feature/digipot/digipot_mcp4018.cpp b/Marlin/src/feature/digipot/digipot_mcp4018.cpp index 12a180e7d4..e59c3d5269 100644 --- a/Marlin/src/feature/digipot/digipot_mcp4018.cpp +++ b/Marlin/src/feature/digipot/digipot_mcp4018.cpp @@ -87,7 +87,7 @@ static void i2c_send(const uint8_t channel, const byte v) { // This is for the MCP4018 I2C based digipot void digipot_i2c_set_current(const uint8_t channel, const float current) { - i2c_send(channel, current_to_wiper(MIN(MAX(current, 0.0f), float(DIGIPOT_A4988_MAX_CURRENT)))); + i2c_send(channel, current_to_wiper(MIN(MAX(current, 0), float(DIGIPOT_A4988_MAX_CURRENT)))); } void digipot_i2c_init() { diff --git a/Marlin/src/feature/digipot/digipot_mcp4451.cpp b/Marlin/src/feature/digipot/digipot_mcp4451.cpp index ca02977f85..4609a2c217 100644 --- a/Marlin/src/feature/digipot/digipot_mcp4451.cpp +++ b/Marlin/src/feature/digipot/digipot_mcp4451.cpp @@ -69,7 +69,7 @@ void digipot_i2c_set_current(const uint8_t channel, const float current) { // Set actual wiper value byte addresses[4] = { 0x00, 0x10, 0x60, 0x70 }; - i2c_send(addr, addresses[channel & 0x3], current_to_wiper(MIN((float) MAX(current, 0.0f), DIGIPOT_I2C_MAX_CURRENT))); + i2c_send(addr, addresses[channel & 0x3], current_to_wiper(MIN((float) MAX(current, 0), DIGIPOT_I2C_MAX_CURRENT))); } void digipot_i2c_init() { diff --git a/Marlin/src/gcode/calibrate/G33.cpp b/Marlin/src/gcode/calibrate/G33.cpp index d96c362ddd..404da70d4f 100644 --- a/Marlin/src/gcode/calibrate/G33.cpp +++ b/Marlin/src/gcode/calibrate/G33.cpp @@ -359,7 +359,7 @@ static float auto_tune_h() { float h_fac = 0.0; h_fac = r_quot / (2.0 / 3.0); - h_fac = 1.0 / h_fac; // (2/3)/CR + h_fac = 1.0f / h_fac; // (2/3)/CR return h_fac; } diff --git a/Marlin/src/gcode/calibrate/M48.cpp b/Marlin/src/gcode/calibrate/M48.cpp index 3b5a18bbdd..dd646961f7 100644 --- a/Marlin/src/gcode/calibrate/M48.cpp +++ b/Marlin/src/gcode/calibrate/M48.cpp @@ -111,7 +111,7 @@ void GcodeSuite::M48() { setup_for_endstop_or_probe_move(); - double mean = 0.0, sigma = 0.0, min = 99999.9, max = -99999.9, sample_set[n_samples]; + float mean = 0.0, sigma = 0.0, min = 99999.9, max = -99999.9, sample_set[n_samples]; // Move to the first point, deploy, and probe const float t = probe_pt(X_probe_location, Y_probe_location, raise_after, verbose_level); @@ -142,7 +142,7 @@ void GcodeSuite::M48() { } for (uint8_t l = 0; l < n_legs - 1; l++) { - double delta_angle; + float delta_angle; if (schizoid_flag) // The points of a 5 point star are 72 degrees apart. We need to @@ -199,7 +199,7 @@ void GcodeSuite::M48() { /** * Get the current mean for the data points we have so far */ - double sum = 0.0; + float sum = 0.0; for (uint8_t j = 0; j <= n; j++) sum += sample_set[j]; mean = sum / (n + 1); diff --git a/Marlin/src/gcode/config/M200-M205.cpp b/Marlin/src/gcode/config/M200-M205.cpp index a1efe77dea..cd45047be6 100644 --- a/Marlin/src/gcode/config/M200-M205.cpp +++ b/Marlin/src/gcode/config/M200-M205.cpp @@ -40,7 +40,7 @@ // setting any extruder filament size disables volumetric on the assumption that // slicers either generate in extruder values as cubic mm or as as filament feeds // for all extruders - if ( (parser.volumetric_enabled = (parser.value_linear_units() != 0.0)) ) + if ( (parser.volumetric_enabled = (parser.value_linear_units() != 0)) ) planner.set_filament_size(target_extruder, parser.value_linear_units()); } planner.calculate_volumetric_multipliers(); @@ -134,7 +134,7 @@ void GcodeSuite::M205() { #if ENABLED(JUNCTION_DEVIATION) if (parser.seen('J')) { const float junc_dev = parser.value_linear_units(); - if (WITHIN(junc_dev, 0.01, 0.3)) { + if (WITHIN(junc_dev, 0.01f, 0.3f)) { planner.junction_deviation_mm = junc_dev; planner.recalculate_max_e_jerk(); } @@ -149,7 +149,7 @@ void GcodeSuite::M205() { if (parser.seen('Z')) { planner.max_jerk[Z_AXIS] = parser.value_linear_units(); #if HAS_MESH - if (planner.max_jerk[Z_AXIS] <= 0.1) + if (planner.max_jerk[Z_AXIS] <= 0.1f) SERIAL_ECHOLNPGM("WARNING! Low Z Jerk may lead to unwanted pauses."); #endif } diff --git a/Marlin/src/gcode/config/M92.cpp b/Marlin/src/gcode/config/M92.cpp index c1b8ed2eec..310b754aa3 100644 --- a/Marlin/src/gcode/config/M92.cpp +++ b/Marlin/src/gcode/config/M92.cpp @@ -37,7 +37,7 @@ void GcodeSuite::M92() { if (parser.seen(axis_codes[i])) { if (i == E_AXIS) { const float value = parser.value_per_axis_unit((AxisEnum)(E_AXIS + TARGET_EXTRUDER)); - if (value < 20.0) { + if (value < 20) { float factor = planner.axis_steps_per_mm[E_AXIS + TARGET_EXTRUDER] / value; // increase e constants if M92 E14 is given for netfab. #if DISABLED(JUNCTION_DEVIATION) planner.max_jerk[E_AXIS] *= factor; diff --git a/Marlin/src/gcode/control/M3-M5.cpp b/Marlin/src/gcode/control/M3-M5.cpp index 980fc26a1a..213d17450a 100644 --- a/Marlin/src/gcode/control/M3-M5.cpp +++ b/Marlin/src/gcode/control/M3-M5.cpp @@ -107,12 +107,12 @@ void GcodeSuite::M3_M4(bool is_M3) { delay_for_power_down(); } else { - int16_t ocr_val = (spindle_laser_power - (SPEED_POWER_INTERCEPT)) * (1.0 / (SPEED_POWER_SLOPE)); // convert RPM to PWM duty cycle + int16_t ocr_val = (spindle_laser_power - (SPEED_POWER_INTERCEPT)) * (1.0f / (SPEED_POWER_SLOPE)); // convert RPM to PWM duty cycle NOMORE(ocr_val, 255); // limit to max the Atmel PWM will support if (spindle_laser_power <= SPEED_POWER_MIN) - ocr_val = (SPEED_POWER_MIN - (SPEED_POWER_INTERCEPT)) * (1.0 / (SPEED_POWER_SLOPE)); // minimum setting + ocr_val = (SPEED_POWER_MIN - (SPEED_POWER_INTERCEPT)) * (1.0f / (SPEED_POWER_SLOPE)); // minimum setting if (spindle_laser_power >= SPEED_POWER_MAX) - ocr_val = (SPEED_POWER_MAX - (SPEED_POWER_INTERCEPT)) * (1.0 / (SPEED_POWER_SLOPE)); // limit to max RPM + ocr_val = (SPEED_POWER_MAX - (SPEED_POWER_INTERCEPT)) * (1.0f / (SPEED_POWER_SLOPE)); // limit to max RPM if (SPINDLE_LASER_PWM_INVERT) ocr_val = 255 - ocr_val; WRITE(SPINDLE_LASER_ENABLE_PIN, SPINDLE_LASER_ENABLE_INVERT); // turn spindle on (active low) analogWrite(SPINDLE_LASER_PWM_PIN, ocr_val & 0xFF); // only write low byte diff --git a/Marlin/src/gcode/gcode.cpp b/Marlin/src/gcode/gcode.cpp index 36848b48f2..c067d8e1e6 100644 --- a/Marlin/src/gcode/gcode.cpp +++ b/Marlin/src/gcode/gcode.cpp @@ -103,7 +103,7 @@ void GcodeSuite::get_destination_from_command() { destination[i] = current_position[i]; } - if (parser.linearval('F') > 0.0) + if (parser.linearval('F') > 0) feedrate_mm_s = MMM_TO_MMS(parser.value_feedrate()); #if ENABLED(PRINTCOUNTER) diff --git a/Marlin/src/gcode/motion/G2_G3.cpp b/Marlin/src/gcode/motion/G2_G3.cpp index 46cd9daa37..09e920846c 100644 --- a/Marlin/src/gcode/motion/G2_G3.cpp +++ b/Marlin/src/gcode/motion/G2_G3.cpp @@ -92,7 +92,7 @@ void plan_arc( const float flat_mm = radius * angular_travel, mm_of_travel = linear_travel ? HYPOT(flat_mm, linear_travel) : ABS(flat_mm); - if (mm_of_travel < 0.001) return; + if (mm_of_travel < 0.001f) return; uint16_t segments = FLOOR(mm_of_travel / (MM_PER_ARC_SEGMENT)); if (segments == 0) segments = 1; @@ -129,7 +129,7 @@ void plan_arc( linear_per_segment = linear_travel / segments, extruder_per_segment = extruder_travel / segments, sin_T = theta_per_segment, - cos_T = 1 - 0.5 * sq(theta_per_segment); // Small angle approximation + cos_T = 1 - 0.5f * sq(theta_per_segment); // Small angle approximation // Initialize the linear axis raw[l_axis] = current_position[l_axis]; @@ -143,7 +143,7 @@ void plan_arc( #if HAS_FEEDRATE_SCALING // SCARA needs to scale the feed rate from mm/s to degrees/s - const float inv_segment_length = 1.0 / (MM_PER_ARC_SEGMENT), + const float inv_segment_length = 1.0f / float(MM_PER_ARC_SEGMENT), inverse_secs = inv_segment_length * fr_mm_s; float oldA = planner.position_float[A_AXIS], oldB = planner.position_float[B_AXIS] @@ -289,19 +289,20 @@ void GcodeSuite::G2_G3(const bool clockwise) { relative_mode = relative_mode_backup; #endif - float arc_offset[2] = { 0.0, 0.0 }; + float arc_offset[2] = { 0, 0 }; if (parser.seenval('R')) { const float r = parser.value_linear_units(), p1 = current_position[X_AXIS], q1 = current_position[Y_AXIS], p2 = destination[X_AXIS], q2 = destination[Y_AXIS]; if (r && (p2 != p1 || q2 != q1)) { - const float e = clockwise ^ (r < 0) ? -1 : 1, // clockwise -1/1, counterclockwise 1/-1 - dx = p2 - p1, dy = q2 - q1, // X and Y differences - d = HYPOT(dx, dy), // Linear distance between the points - h = SQRT(sq(r) - sq(d * 0.5)), // Distance to the arc pivot-point - mx = (p1 + p2) * 0.5, my = (q1 + q2) * 0.5, // Point between the two points - sx = -dy / d, sy = dx / d, // Slope of the perpendicular bisector - cx = mx + e * h * sx, cy = my + e * h * sy; // Pivot-point of the arc + const float e = clockwise ^ (r < 0) ? -1 : 1, // clockwise -1/1, counterclockwise 1/-1 + dx = p2 - p1, dy = q2 - q1, // X and Y differences + d = HYPOT(dx, dy), // Linear distance between the points + dinv = 1/d, // Inverse of d + h = SQRT(sq(r) - sq(d * 0.5f)), // Distance to the arc pivot-point + mx = (p1 + p2) * 0.5f, my = (q1 + q2) * 0.5f,// Point between the two points + sx = -dy * dinv, sy = dx * dinv, // Slope of the perpendicular bisector + cx = mx + e * h * sx, cy = my + e * h * sy; // Pivot-point of the arc arc_offset[0] = cx - p1; arc_offset[1] = cy - q1; } diff --git a/Marlin/src/gcode/parser.h b/Marlin/src/gcode/parser.h index e355856709..e14889d62f 100644 --- a/Marlin/src/gcode/parser.h +++ b/Marlin/src/gcode/parser.h @@ -186,15 +186,15 @@ public: if (c == '\0' || c == ' ') break; if (c == 'E' || c == 'e') { *e = '\0'; - const float ret = strtod(value_ptr, NULL); + const float ret = strtof(value_ptr, NULL); *e = c; return ret; } ++e; } - return strtod(value_ptr, NULL); + return strtof(value_ptr, NULL); } - return 0.0; + return 0; } // Code value as a long or ulong @@ -203,7 +203,7 @@ public: // Code value for use as time FORCE_INLINE static millis_t value_millis() { return value_ulong(); } - FORCE_INLINE static millis_t value_millis_from_seconds() { return value_float() * 1000UL; } + FORCE_INLINE static millis_t value_millis_from_seconds() { return (millis_t)(value_float() * 1000); } // Reduce to fewer bits FORCE_INLINE static int16_t value_int() { return (int16_t)value_long(); } @@ -220,14 +220,14 @@ public: inline static void set_input_linear_units(const LinearUnit units) { switch (units) { case LINEARUNIT_INCH: - linear_unit_factor = 25.4; + linear_unit_factor = 25.4f; break; case LINEARUNIT_MM: default: - linear_unit_factor = 1.0; + linear_unit_factor = 1; break; } - volumetric_unit_factor = POW(linear_unit_factor, 3.0); + volumetric_unit_factor = POW(linear_unit_factor, 3); } inline static float axis_unit_factor(const AxisEnum axis) { @@ -261,9 +261,9 @@ public: inline static float to_temp_units(const float &f) { switch (input_temp_units) { case TEMPUNIT_F: - return f * 0.5555555556 + 32.0; + return f * 0.5555555556f + 32; case TEMPUNIT_K: - return f + 273.15; + return f + 273.15f; case TEMPUNIT_C: default: return f; @@ -276,9 +276,9 @@ public: const float f = value_float(); switch (input_temp_units) { case TEMPUNIT_F: - return (f - 32.0) * 0.5555555556; + return (f - 32) * 0.5555555556f; case TEMPUNIT_K: - return f - 273.15; + return f - 273.15f; case TEMPUNIT_C: default: return f; @@ -288,7 +288,7 @@ public: inline static float value_celsius_diff() { switch (input_temp_units) { case TEMPUNIT_F: - return value_float() * 0.5555555556; + return value_float() * 0.5555555556f; case TEMPUNIT_C: case TEMPUNIT_K: default: @@ -315,8 +315,8 @@ public: FORCE_INLINE static uint16_t ushortval(const char c, const uint16_t dval=0) { return seenval(c) ? value_ushort() : dval; } FORCE_INLINE static int32_t longval(const char c, const int32_t dval=0) { return seenval(c) ? value_long() : dval; } FORCE_INLINE static uint32_t ulongval(const char c, const uint32_t dval=0) { return seenval(c) ? value_ulong() : dval; } - FORCE_INLINE static float linearval(const char c, const float dval=0.0) { return seenval(c) ? value_linear_units() : dval; } - FORCE_INLINE static float celsiusval(const char c, const float dval=0.0) { return seenval(c) ? value_celsius() : dval; } + FORCE_INLINE static float linearval(const char c, const float dval=0) { return seenval(c) ? value_linear_units() : dval; } + FORCE_INLINE static float celsiusval(const char c, const float dval=0){ return seenval(c) ? value_celsius() : dval; } }; diff --git a/Marlin/src/gcode/temperature/M104_M109.cpp b/Marlin/src/gcode/temperature/M104_M109.cpp index 8cc02401ac..61099aa208 100644 --- a/Marlin/src/gcode/temperature/M104_M109.cpp +++ b/Marlin/src/gcode/temperature/M104_M109.cpp @@ -225,7 +225,7 @@ void GcodeSuite::M109() { // break after MIN_COOLING_SLOPE_TIME seconds // if the temperature did not drop at least MIN_COOLING_SLOPE_DEG if (!next_cool_check_ms || ELAPSED(now, next_cool_check_ms)) { - if (old_temp - temp < MIN_COOLING_SLOPE_DEG) break; + if (old_temp - temp < float(MIN_COOLING_SLOPE_DEG)) break; next_cool_check_ms = now + 1000UL * MIN_COOLING_SLOPE_TIME; old_temp = temp; } diff --git a/Marlin/src/gcode/temperature/M140_M190.cpp b/Marlin/src/gcode/temperature/M140_M190.cpp index 324a1b9f93..c51c643288 100644 --- a/Marlin/src/gcode/temperature/M140_M190.cpp +++ b/Marlin/src/gcode/temperature/M140_M190.cpp @@ -82,7 +82,7 @@ void GcodeSuite::M190() { #define TEMP_BED_CONDITIONS (wants_to_cool ? thermalManager.isCoolingBed() : thermalManager.isHeatingBed()) #endif - float target_temp = -1.0, old_temp = 9999.0; + float target_temp = -1, old_temp = 9999; bool wants_to_cool = false; wait_for_heatup = true; millis_t now, next_temp_ms = 0, next_cool_check_ms = 0; @@ -163,7 +163,7 @@ void GcodeSuite::M190() { // Break after MIN_COOLING_SLOPE_TIME_BED seconds // if the temperature did not drop at least MIN_COOLING_SLOPE_DEG_BED if (!next_cool_check_ms || ELAPSED(now, next_cool_check_ms)) { - if (old_temp - temp < MIN_COOLING_SLOPE_DEG_BED) break; + if (old_temp - temp < float(MIN_COOLING_SLOPE_DEG_BED)) break; next_cool_check_ms = now + 1000UL * MIN_COOLING_SLOPE_TIME_BED; old_temp = temp; } diff --git a/Marlin/src/lcd/dogm/status_screen_DOGM.h b/Marlin/src/lcd/dogm/status_screen_DOGM.h index fc8f2324c0..d8d8b252d8 100644 --- a/Marlin/src/lcd/dogm/status_screen_DOGM.h +++ b/Marlin/src/lcd/dogm/status_screen_DOGM.h @@ -72,7 +72,7 @@ FORCE_INLINE void _draw_heater_status(const uint8_t x, const int8_t heater, cons } if (PAGE_CONTAINS(21, 28)) { - _draw_centered_temp(0.5 + ( + _draw_centered_temp(0.5f + ( #if HAS_HEATED_BED isBed ? thermalManager.degBed() : #endif diff --git a/Marlin/src/lcd/ultralcd.cpp b/Marlin/src/lcd/ultralcd.cpp index 7599e5f7f0..ec4604d025 100644 --- a/Marlin/src/lcd/ultralcd.cpp +++ b/Marlin/src/lcd/ultralcd.cpp @@ -479,7 +479,7 @@ uint16_t max_display_update_time = 0; #if IS_KINEMATIC bool processing_manual_move = false; - float manual_move_offset = 0.0; + float manual_move_offset = 0; #else constexpr bool processing_manual_move = false; #endif @@ -1285,13 +1285,13 @@ void lcd_quick_feedback(const bool clear_buttons) { ubl_encoderPosition = (ubl.encoder_diff > 0) ? 1 : -1; ubl.encoder_diff = 0; - mesh_edit_accumulator += float(ubl_encoderPosition) * 0.005 / 2.0; + mesh_edit_accumulator += float(ubl_encoderPosition) * 0.005f * 0.5f; mesh_edit_value = mesh_edit_accumulator; encoderPosition = 0; lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT; - const int32_t rounded = (int32_t)(mesh_edit_value * 1000.0); - mesh_edit_value = float(rounded - (rounded % 5L)) / 1000.0; + const int32_t rounded = (int32_t)(mesh_edit_value * 1000); + mesh_edit_value = float(rounded - (rounded % 5L)) / 1000; } if (lcdDrawUpdate) { @@ -1419,7 +1419,7 @@ void lcd_quick_feedback(const bool clear_buttons) { // Leveling Fade Height // #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) && DISABLED(SLIM_LCD_MENUS) - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float3, MSG_Z_FADE_HEIGHT, &new_z_fade_height, 0.0, 100.0, _lcd_set_z_fade_height); + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float3, MSG_Z_FADE_HEIGHT, &new_z_fade_height, 0, 100, _lcd_set_z_fade_height); #endif // @@ -1978,7 +1978,7 @@ void lcd_quick_feedback(const bool clear_buttons) { // if (encoderPosition) { const float z = current_position[Z_AXIS] + float((int32_t)encoderPosition) * (MBL_Z_STEP); - line_to_z(constrain(z, -(LCD_PROBE_Z_RANGE) * 0.5, (LCD_PROBE_Z_RANGE) * 0.5)); + line_to_z(constrain(z, -(LCD_PROBE_Z_RANGE) * 0.5f, (LCD_PROBE_Z_RANGE) * 0.5f)); lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT; encoderPosition = 0; } @@ -1988,7 +1988,7 @@ void lcd_quick_feedback(const bool clear_buttons) { // if (lcdDrawUpdate) { const float v = current_position[Z_AXIS]; - lcd_implementation_drawedit(PSTR(MSG_MOVE_Z), ftostr43sign(v + (v < 0 ? -0.0001 : 0.0001), '+')); + lcd_implementation_drawedit(PSTR(MSG_MOVE_Z), ftostr43sign(v + (v < 0 ? -0.0001f : 0.0001f), '+')); } } @@ -2571,7 +2571,7 @@ void lcd_quick_feedback(const bool clear_buttons) { MENU_ITEM(submenu, MSG_UBL_TOOLS, _lcd_ubl_tools_menu); MENU_ITEM(gcode, MSG_UBL_INFO_UBL, PSTR("G29 W")); #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float3, MSG_Z_FADE_HEIGHT, &new_z_fade_height, 0.0, 100.0, _lcd_set_z_fade_height); + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float3, MSG_Z_FADE_HEIGHT, &new_z_fade_height, 0, 100, _lcd_set_z_fade_height); #endif END_MENU(); } @@ -2627,7 +2627,7 @@ void lcd_quick_feedback(const bool clear_buttons) { // Z Fade Height #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float3, MSG_Z_FADE_HEIGHT, &new_z_fade_height, 0.0, 100.0, _lcd_set_z_fade_height); + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float3, MSG_Z_FADE_HEIGHT, &new_z_fade_height, 0, 100, _lcd_set_z_fade_height); #endif // @@ -2713,7 +2713,7 @@ void lcd_quick_feedback(const bool clear_buttons) { MENU_ITEM_EDIT_CALLBACK(bool, MSG_BED_LEVELING, &new_level_state, _lcd_toggle_bed_leveling); } #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float3, MSG_Z_FADE_HEIGHT, &new_z_fade_height, 0.0, 100.0, _lcd_set_z_fade_height); + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float3, MSG_Z_FADE_HEIGHT, &new_z_fade_height, 0, 100, _lcd_set_z_fade_height); #endif #endif @@ -2877,15 +2877,15 @@ void lcd_quick_feedback(const bool clear_buttons) { void lcd_delta_settings() { START_MENU(); MENU_BACK(MSG_DELTA_CALIBRATE); - MENU_ITEM_EDIT_CALLBACK(float52sign, MSG_DELTA_HEIGHT, &delta_height, delta_height - 10.0, delta_height + 10.0, _recalc_delta_settings); - MENU_ITEM_EDIT_CALLBACK(float43, "Ex", &delta_endstop_adj[A_AXIS], -5.0, 5.0, _recalc_delta_settings); - MENU_ITEM_EDIT_CALLBACK(float43, "Ey", &delta_endstop_adj[B_AXIS], -5.0, 5.0, _recalc_delta_settings); - MENU_ITEM_EDIT_CALLBACK(float43, "Ez", &delta_endstop_adj[C_AXIS], -5.0, 5.0, _recalc_delta_settings); - MENU_ITEM_EDIT_CALLBACK(float52sign, MSG_DELTA_RADIUS, &delta_radius, delta_radius - 5.0, delta_radius + 5.0, _recalc_delta_settings); - MENU_ITEM_EDIT_CALLBACK(float43, "Tx", &delta_tower_angle_trim[A_AXIS], -5.0, 5.0, _recalc_delta_settings); - MENU_ITEM_EDIT_CALLBACK(float43, "Ty", &delta_tower_angle_trim[B_AXIS], -5.0, 5.0, _recalc_delta_settings); - MENU_ITEM_EDIT_CALLBACK(float43, "Tz", &delta_tower_angle_trim[C_AXIS], -5.0, 5.0, _recalc_delta_settings); - MENU_ITEM_EDIT_CALLBACK(float52sign, MSG_DELTA_DIAG_ROD, &delta_diagonal_rod, delta_diagonal_rod - 5.0, delta_diagonal_rod + 5.0, _recalc_delta_settings); + MENU_ITEM_EDIT_CALLBACK(float52sign, MSG_DELTA_HEIGHT, &delta_height, delta_height - 10, delta_height + 10, _recalc_delta_settings); + MENU_ITEM_EDIT_CALLBACK(float43, "Ex", &delta_endstop_adj[A_AXIS], -5, 5, _recalc_delta_settings); + MENU_ITEM_EDIT_CALLBACK(float43, "Ey", &delta_endstop_adj[B_AXIS], -5, 5, _recalc_delta_settings); + MENU_ITEM_EDIT_CALLBACK(float43, "Ez", &delta_endstop_adj[C_AXIS], -5, 5, _recalc_delta_settings); + MENU_ITEM_EDIT_CALLBACK(float52sign, MSG_DELTA_RADIUS, &delta_radius, delta_radius - 5, delta_radius + 5, _recalc_delta_settings); + MENU_ITEM_EDIT_CALLBACK(float43, "Tx", &delta_tower_angle_trim[A_AXIS], -5, 5, _recalc_delta_settings); + MENU_ITEM_EDIT_CALLBACK(float43, "Ty", &delta_tower_angle_trim[B_AXIS], -5, 5, _recalc_delta_settings); + MENU_ITEM_EDIT_CALLBACK(float43, "Tz", &delta_tower_angle_trim[C_AXIS], -5, 5, _recalc_delta_settings); + MENU_ITEM_EDIT_CALLBACK(float52sign, MSG_DELTA_DIAG_ROD, &delta_diagonal_rod, delta_diagonal_rod - 5, delta_diagonal_rod + 5, _recalc_delta_settings); END_MENU(); } @@ -2981,7 +2981,7 @@ void lcd_quick_feedback(const bool clear_buttons) { #endif manual_move_e_index = eindex >= 0 ? eindex : active_extruder; #endif - manual_move_start_time = millis() + (move_menu_scale < 0.99 ? 0UL : 250UL); // delay for bigger moves + manual_move_start_time = millis() + (move_menu_scale < 0.99f ? 0UL : 250UL); // delay for bigger moves manual_move_axis = (int8_t)axis; } @@ -3065,7 +3065,7 @@ void lcd_quick_feedback(const bool clear_buttons) { + manual_move_offset #endif , axis); - lcd_implementation_drawedit(name, move_menu_scale >= 0.1 ? ftostr41sign(pos) : ftostr43sign(pos)); + lcd_implementation_drawedit(name, move_menu_scale >= 0.1f ? ftostr41sign(pos) : ftostr43sign(pos)); } } void lcd_move_x() { _lcd_move_xyz(PSTR(MSG_MOVE_X), X_AXIS); } @@ -3150,9 +3150,9 @@ void lcd_quick_feedback(const bool clear_buttons) { move_menu_scale = scale; lcd_goto_screen(_manual_move_func_ptr); } - void lcd_move_menu_10mm() { _goto_manual_move(10.0); } - void lcd_move_menu_1mm() { _goto_manual_move( 1.0); } - void lcd_move_menu_01mm() { _goto_manual_move( 0.1); } + void lcd_move_menu_10mm() { _goto_manual_move(10); } + void lcd_move_menu_1mm() { _goto_manual_move( 1); } + void lcd_move_menu_01mm() { _goto_manual_move( 0.1f); } void _lcd_move_distance_menu(const AxisEnum axis, const screenFunc_t func) { _manual_move_func_ptr = func; @@ -3527,9 +3527,9 @@ void lcd_quick_feedback(const bool clear_buttons) { // #if ENABLED(AUTOTEMP) && HAS_TEMP_HOTEND MENU_ITEM_EDIT(bool, MSG_AUTOTEMP, &planner.autotemp_enabled); - MENU_ITEM_EDIT(float3, MSG_MIN, &planner.autotemp_min, 0, HEATER_0_MAXTEMP - 15); - MENU_ITEM_EDIT(float3, MSG_MAX, &planner.autotemp_max, 0, HEATER_0_MAXTEMP - 15); - MENU_ITEM_EDIT(float52, MSG_FACTOR, &planner.autotemp_factor, 0.0, 1.0); + MENU_ITEM_EDIT(float3, MSG_MIN, &planner.autotemp_min, 0, float(HEATER_0_MAXTEMP) - 15); + MENU_ITEM_EDIT(float3, MSG_MAX, &planner.autotemp_max, 0, float(HEATER_0_MAXTEMP) - 15); + MENU_ITEM_EDIT(float52, MSG_FACTOR, &planner.autotemp_factor, 0, 1); #endif // @@ -3546,7 +3546,7 @@ void lcd_quick_feedback(const bool clear_buttons) { raw_Ki = unscalePID_i(PID_PARAM(Ki, eindex)); \ raw_Kd = unscalePID_d(PID_PARAM(Kd, eindex)); \ MENU_ITEM_EDIT(float52sign, MSG_PID_P ELABEL, &PID_PARAM(Kp, eindex), 1, 9990); \ - MENU_ITEM_EDIT_CALLBACK(float52sign, MSG_PID_I ELABEL, &raw_Ki, 0.01, 9990, copy_and_scalePID_i_E ## eindex); \ + MENU_ITEM_EDIT_CALLBACK(float52sign, MSG_PID_I ELABEL, &raw_Ki, 0.01f, 9990, copy_and_scalePID_i_E ## eindex); \ MENU_ITEM_EDIT_CALLBACK(float52sign, MSG_PID_D ELABEL, &raw_Kd, 1, 9990, copy_and_scalePID_d_E ## eindex) #if ENABLED(PID_EXTRUSION_SCALING) @@ -3668,7 +3668,7 @@ void lcd_quick_feedback(const bool clear_buttons) { if (e == active_extruder) _planner_refresh_positioning(); else - planner.steps_to_mm[E_AXIS + e] = 1.0 / planner.axis_steps_per_mm[E_AXIS + e]; + planner.steps_to_mm[E_AXIS + e] = 1.0f / planner.axis_steps_per_mm[E_AXIS + e]; } void _planner_refresh_e0_positioning() { _planner_refresh_e_positioning(0); } void _planner_refresh_e1_positioning() { _planner_refresh_e_positioning(1); } @@ -3764,14 +3764,14 @@ void lcd_quick_feedback(const bool clear_buttons) { MENU_BACK(MSG_MOTION); #if ENABLED(JUNCTION_DEVIATION) - MENU_ITEM_EDIT_CALLBACK(float43, MSG_JUNCTION_DEVIATION, &planner.junction_deviation_mm, 0.01, 0.3, planner.recalculate_max_e_jerk); + MENU_ITEM_EDIT_CALLBACK(float43, MSG_JUNCTION_DEVIATION, &planner.junction_deviation_mm, 0.01f, 0.3f, planner.recalculate_max_e_jerk); #else MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_VA_JERK, &planner.max_jerk[A_AXIS], 1, 990); MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_VB_JERK, &planner.max_jerk[B_AXIS], 1, 990); #if ENABLED(DELTA) MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_VC_JERK, &planner.max_jerk[C_AXIS], 1, 990); #else - MENU_MULTIPLIER_ITEM_EDIT(float52sign, MSG_VC_JERK, &planner.max_jerk[C_AXIS], 0.1, 990); + MENU_MULTIPLIER_ITEM_EDIT(float52sign, MSG_VC_JERK, &planner.max_jerk[C_AXIS], 0.1f, 990); #endif MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_VE_JERK, &planner.max_jerk[E_AXIS], 1, 990); #endif @@ -3869,17 +3869,17 @@ void lcd_quick_feedback(const bool clear_buttons) { if (parser.volumetric_enabled) { #if EXTRUDERS == 1 - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM, &planner.filament_size[0], 1.5, 3.25, planner.calculate_volumetric_multipliers); + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM, &planner.filament_size[0], 1.5f, 3.25f, planner.calculate_volumetric_multipliers); #else // EXTRUDERS > 1 - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM, &planner.filament_size[active_extruder], 1.5, 3.25, planner.calculate_volumetric_multipliers); - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM MSG_DIAM_E1, &planner.filament_size[0], 1.5, 3.25, planner.calculate_volumetric_multipliers); - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM MSG_DIAM_E2, &planner.filament_size[1], 1.5, 3.25, planner.calculate_volumetric_multipliers); + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM, &planner.filament_size[active_extruder], 1.5f, 3.25f, planner.calculate_volumetric_multipliers); + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM MSG_DIAM_E1, &planner.filament_size[0], 1.5f, 3.25f, planner.calculate_volumetric_multipliers); + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM MSG_DIAM_E2, &planner.filament_size[1], 1.5f, 3.25f, planner.calculate_volumetric_multipliers); #if EXTRUDERS > 2 - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM MSG_DIAM_E3, &planner.filament_size[2], 1.5, 3.25, planner.calculate_volumetric_multipliers); + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM MSG_DIAM_E3, &planner.filament_size[2], 1.5f, 3.25f, planner.calculate_volumetric_multipliers); #if EXTRUDERS > 3 - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM MSG_DIAM_E4, &planner.filament_size[3], 1.5, 3.25, planner.calculate_volumetric_multipliers); + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM MSG_DIAM_E4, &planner.filament_size[3], 1.5f, 3.25f, planner.calculate_volumetric_multipliers); #if EXTRUDERS > 4 - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM MSG_DIAM_E5, &planner.filament_size[4], 1.5, 3.25, planner.calculate_volumetric_multipliers); + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM MSG_DIAM_E5, &planner.filament_size[4], 1.5f, 3.25f, planner.calculate_volumetric_multipliers); #endif // EXTRUDERS > 4 #endif // EXTRUDERS > 3 #endif // EXTRUDERS > 2 @@ -3892,39 +3892,39 @@ void lcd_quick_feedback(const bool clear_buttons) { #if ENABLED(PREVENT_LENGTHY_EXTRUDE) EXTRUDE_MAXLENGTH #else - 999.0f + 999 #endif ; #if EXTRUDERS == 1 - MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD, &filament_change_unload_length[0], 0.0, extrude_maxlength); + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD, &filament_change_unload_length[0], 0, extrude_maxlength); #else // EXTRUDERS > 1 - MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD, &filament_change_unload_length[active_extruder], 0.0, extrude_maxlength); - MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD MSG_DIAM_E1, &filament_change_unload_length[0], 0.0, extrude_maxlength); - MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD MSG_DIAM_E2, &filament_change_unload_length[1], 0.0, extrude_maxlength); + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD, &filament_change_unload_length[active_extruder], 0, extrude_maxlength); + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD MSG_DIAM_E1, &filament_change_unload_length[0], 0, extrude_maxlength); + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD MSG_DIAM_E2, &filament_change_unload_length[1], 0, extrude_maxlength); #if EXTRUDERS > 2 - MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD MSG_DIAM_E3, &filament_change_unload_length[2], 0.0, extrude_maxlength); + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD MSG_DIAM_E3, &filament_change_unload_length[2], 0, extrude_maxlength); #if EXTRUDERS > 3 - MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD MSG_DIAM_E4, &filament_change_unload_length[3], 0.0, extrude_maxlength); + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD MSG_DIAM_E4, &filament_change_unload_length[3], 0, extrude_maxlength); #if EXTRUDERS > 4 - MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD MSG_DIAM_E5, &filament_change_unload_length[4], 0.0, extrude_maxlength); + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD MSG_DIAM_E5, &filament_change_unload_length[4], 0, extrude_maxlength); #endif // EXTRUDERS > 4 #endif // EXTRUDERS > 3 #endif // EXTRUDERS > 2 #endif // EXTRUDERS > 1 #if EXTRUDERS == 1 - MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD, &filament_change_load_length[0], 0.0, extrude_maxlength); + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD, &filament_change_load_length[0], 0, extrude_maxlength); #else // EXTRUDERS > 1 - MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD, &filament_change_load_length[active_extruder], 0.0, extrude_maxlength); - MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD MSG_DIAM_E1, &filament_change_load_length[0], 0.0, extrude_maxlength); - MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD MSG_DIAM_E2, &filament_change_load_length[1], 0.0, extrude_maxlength); + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD, &filament_change_load_length[active_extruder], 0, extrude_maxlength); + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD MSG_DIAM_E1, &filament_change_load_length[0], 0, extrude_maxlength); + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD MSG_DIAM_E2, &filament_change_load_length[1], 0, extrude_maxlength); #if EXTRUDERS > 2 - MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD MSG_DIAM_E3, &filament_change_load_length[2], 0.0, extrude_maxlength); + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD MSG_DIAM_E3, &filament_change_load_length[2], 0, extrude_maxlength); #if EXTRUDERS > 3 - MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD MSG_DIAM_E4, &filament_change_load_length[3], 0.0, extrude_maxlength); + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD MSG_DIAM_E4, &filament_change_load_length[3], 0, extrude_maxlength); #if EXTRUDERS > 4 - MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD MSG_DIAM_E5, &filament_change_load_length[4], 0.0, extrude_maxlength); + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD MSG_DIAM_E5, &filament_change_load_length[4], 0, extrude_maxlength); #endif // EXTRUDERS > 4 #endif // EXTRUDERS > 3 #endif // EXTRUDERS > 2 @@ -4824,9 +4824,9 @@ void lcd_quick_feedback(const bool clear_buttons) { if ((int32_t)encoderPosition < 0) encoderPosition = 0; \ if ((int32_t)encoderPosition > maxEditValue) encoderPosition = maxEditValue; \ if (lcdDrawUpdate) \ - lcd_implementation_drawedit(editLabel, _strFunc(((_type)((int32_t)encoderPosition + minEditValue)) * (1.0 / _scale))); \ + lcd_implementation_drawedit(editLabel, _strFunc(((_type)((int32_t)encoderPosition + minEditValue)) * (1.0f / _scale))); \ if (lcd_clicked || (liveEdit && lcdDrawUpdate)) { \ - _type value = ((_type)((int32_t)encoderPosition + minEditValue)) * (1.0 / _scale); \ + _type value = ((_type)((int32_t)encoderPosition + minEditValue)) * (1.0f / _scale); \ if (editValue != NULL) *((_type*)editValue) = value; \ if (callbackFunc && (liveEdit || lcd_clicked)) (*callbackFunc)(); \ if (lcd_clicked) lcd_goto_previous_menu(); \ @@ -4857,14 +4857,14 @@ void lcd_quick_feedback(const bool clear_buttons) { DEFINE_MENU_EDIT_TYPE(int16_t, int3, itostr3, 1); DEFINE_MENU_EDIT_TYPE(uint8_t, int8, i8tostr3, 1); - DEFINE_MENU_EDIT_TYPE(float, float3, ftostr3, 1.0); - DEFINE_MENU_EDIT_TYPE(float, float52, ftostr52, 100.0); - DEFINE_MENU_EDIT_TYPE(float, float43, ftostr43sign, 1000.0); - DEFINE_MENU_EDIT_TYPE(float, float5, ftostr5rj, 0.01); - DEFINE_MENU_EDIT_TYPE(float, float51, ftostr51sign, 10.0); - DEFINE_MENU_EDIT_TYPE(float, float52sign, ftostr52sign, 100.0); - DEFINE_MENU_EDIT_TYPE(float, float62, ftostr62rj, 100.0); - DEFINE_MENU_EDIT_TYPE(uint32_t, long5, ftostr5rj, 0.01); + DEFINE_MENU_EDIT_TYPE(float, float3, ftostr3, 1); + DEFINE_MENU_EDIT_TYPE(float, float52, ftostr52, 100); + DEFINE_MENU_EDIT_TYPE(float, float43, ftostr43sign, 1000); + DEFINE_MENU_EDIT_TYPE(float, float5, ftostr5rj, 0.01f); + DEFINE_MENU_EDIT_TYPE(float, float51, ftostr51sign, 10); + DEFINE_MENU_EDIT_TYPE(float, float52sign, ftostr52sign, 100); + DEFINE_MENU_EDIT_TYPE(float, float62, ftostr62rj, 100); + DEFINE_MENU_EDIT_TYPE(uint32_t, long5, ftostr5rj, 0.01f); /** * @@ -5228,7 +5228,7 @@ void lcd_update() { if (lastEncoderMovementMillis) { // Note that the rate is always calculated between two passes through the // loop and that the abs of the encoderDiff value is tracked. - float encoderStepRate = float(encoderMovementSteps) / float(ms - lastEncoderMovementMillis) * 1000.0; + float encoderStepRate = float(encoderMovementSteps) / float(ms - lastEncoderMovementMillis) * 1000; if (encoderStepRate >= ENCODER_100X_STEPS_PER_SEC) encoderMultiplier = 100; else if (encoderStepRate >= ENCODER_10X_STEPS_PER_SEC) encoderMultiplier = 10; diff --git a/Marlin/src/libs/vector_3.cpp b/Marlin/src/libs/vector_3.cpp index c0dfbc93fb..e4fe0afaac 100644 --- a/Marlin/src/libs/vector_3.cpp +++ b/Marlin/src/libs/vector_3.cpp @@ -69,7 +69,7 @@ vector_3 vector_3::get_normal() { float vector_3::get_length() { return SQRT(sq(x) + sq(y) + sq(z)); } void vector_3::normalize() { - const float inv_length = 1.0 / get_length(); + const float inv_length = RSQRT(sq(x) + sq(y) + sq(z)); x *= inv_length; y *= inv_length; z *= inv_length; diff --git a/Marlin/src/module/configuration_store.cpp b/Marlin/src/module/configuration_store.cpp index d58382de83..14bfafa802 100644 --- a/Marlin/src/module/configuration_store.cpp +++ b/Marlin/src/module/configuration_store.cpp @@ -417,12 +417,12 @@ void MarlinSettings::postprocess() { EEPROM_WRITE(planner.min_travel_feedrate_mm_s); #if ENABLED(JUNCTION_DEVIATION) - const float planner_max_jerk[] = { DEFAULT_XJERK, DEFAULT_YJERK, DEFAULT_ZJERK, DEFAULT_EJERK }; + const float planner_max_jerk[] = { float(DEFAULT_XJERK), float(DEFAULT_YJERK), float(DEFAULT_ZJERK), float(DEFAULT_EJERK) }; EEPROM_WRITE(planner_max_jerk); EEPROM_WRITE(planner.junction_deviation_mm); #else EEPROM_WRITE(planner.max_jerk); - dummy = 0.02; + dummy = 0.02f; EEPROM_WRITE(dummy); #endif @@ -488,7 +488,7 @@ void MarlinSettings::postprocess() { #if ABL_PLANAR EEPROM_WRITE(planner.bed_level_matrix); #else - dummy = 0.0; + dummy = 0.0f; for (uint8_t q = 9; q--;) EEPROM_WRITE(dummy); #endif @@ -974,7 +974,7 @@ void MarlinSettings::postprocess() { eeprom_error = true; } else { - float dummy = 0; + float dummy = 0.0f; #if DISABLED(AUTO_BED_LEVELING_UBL) || DISABLED(FWRETRACT) || ENABLED(NO_VOLUMETRICS) bool dummyb; #endif @@ -1733,7 +1733,7 @@ void MarlinSettings::reset(PORTARG_SOLO) { planner.min_travel_feedrate_mm_s = DEFAULT_MINTRAVELFEEDRATE; #if ENABLED(JUNCTION_DEVIATION) - planner.junction_deviation_mm = JUNCTION_DEVIATION_MM; + planner.junction_deviation_mm = float(JUNCTION_DEVIATION_MM); #else planner.max_jerk[X_AXIS] = DEFAULT_XJERK; planner.max_jerk[Y_AXIS] = DEFAULT_YJERK; @@ -1835,7 +1835,7 @@ void MarlinSettings::reset(PORTARG_SOLO) { HOTEND_LOOP() #endif { - PID_PARAM(Kp, e) = DEFAULT_Kp; + PID_PARAM(Kp, e) = float(DEFAULT_Kp); PID_PARAM(Ki, e) = scalePID_i(DEFAULT_Ki); PID_PARAM(Kd, e) = scalePID_d(DEFAULT_Kd); #if ENABLED(PID_EXTRUSION_SCALING) diff --git a/Marlin/src/module/motion.cpp b/Marlin/src/module/motion.cpp index 1b74694fd8..bf8e49dc1c 100644 --- a/Marlin/src/module/motion.cpp +++ b/Marlin/src/module/motion.cpp @@ -77,7 +77,7 @@ bool relative_mode; // = false; * Used by 'buffer_line_to_current_position' to do a move after changing it. * Used by 'SYNC_PLAN_POSITION_KINEMATIC' to update 'planner.position'. */ -float current_position[XYZE] = { 0.0 }; +float current_position[XYZE] = { 0 }; /** * Cartesian Destination @@ -85,7 +85,7 @@ float current_position[XYZE] = { 0.0 }; * and expected by functions like 'prepare_move_to_destination'. * Set with 'get_destination_from_command' or 'set_destination_from_current'. */ -float destination[XYZE] = { 0.0 }; +float destination[XYZE] = { 0 }; // The active extruder (tool). Set with T command. @@ -100,7 +100,7 @@ uint8_t active_extruder; // = 0; // no other feedrate is specified. Overridden for special moves. // Set by the last G0 through G5 command's "F" parameter. // Functions that override this for custom moves *must always* restore it! -float feedrate_mm_s = MMM_TO_MMS(1500.0); +float feedrate_mm_s = MMM_TO_MMS(1500.0f); int16_t feedrate_percentage = 100; @@ -509,7 +509,7 @@ float soft_endstop_min[XYZ] = { X_MIN_BED, Y_MIN_BED, Z_MIN_POS }, * but may produce jagged lines. Try 0.5mm, 1.0mm, and 2.0mm * and compare the difference. */ - #define SCARA_MIN_SEGMENT_LENGTH 0.5 + #define SCARA_MIN_SEGMENT_LENGTH 0.5f #endif /** @@ -566,14 +566,14 @@ float soft_endstop_min[XYZ] = { X_MIN_BED, Y_MIN_BED, Z_MIN_POS }, // For SCARA enforce a minimum segment size #if IS_SCARA - NOMORE(segments, cartesian_mm * (1.0 / SCARA_MIN_SEGMENT_LENGTH)); + NOMORE(segments, cartesian_mm * (1.0f / float(SCARA_MIN_SEGMENT_LENGTH))); #endif // At least one segment is required NOLESS(segments, 1U); // The approximate length of each segment - const float inv_segments = 1.0 / float(segments), + const float inv_segments = 1.0f / float(segments), segment_distance[XYZE] = { xdiff * inv_segments, ydiff * inv_segments, @@ -599,7 +599,7 @@ float soft_endstop_min[XYZ] = { X_MIN_BED, Y_MIN_BED, Z_MIN_POS }, // SCARA needs to scale the feed rate from mm/s to degrees/s // i.e., Complete the angular vector in the given time. const float segment_length = cartesian_mm * inv_segments, - inv_segment_length = 1.0 / segment_length, // 1/mm/segs + inv_segment_length = 1.0f / segment_length, // 1/mm/segs inverse_secs = inv_segment_length * _feedrate_mm_s; float oldA = planner.position_float[A_AXIS], @@ -756,7 +756,7 @@ float soft_endstop_min[XYZ] = { X_MIN_BED, Y_MIN_BED, Z_MIN_POS }, NOLESS(segments, 1U); // The approximate length of each segment - const float inv_segments = 1.0 / float(segments), + const float inv_segments = 1.0f / float(segments), cartesian_segment_mm = cartesian_mm * inv_segments, segment_distance[XYZE] = { xdiff * inv_segments, @@ -1335,7 +1335,7 @@ void homeaxis(const AxisEnum axis) { #if ENABLED(DEBUG_LEVELING_FEATURE) if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("Home 1 Fast:"); #endif - do_homing_move(axis, 1.5 * max_length(axis) * axis_home_dir); + do_homing_move(axis, 1.5f * max_length(axis) * axis_home_dir); // When homing Z with probe respect probe clearance const float bump = axis_home_dir * ( diff --git a/Marlin/src/module/motion.h b/Marlin/src/module/motion.h index 71288cb032..78646a9f45 100644 --- a/Marlin/src/module/motion.h +++ b/Marlin/src/module/motion.h @@ -71,7 +71,7 @@ extern float feedrate_mm_s; * Feedrate scaling and conversion */ extern int16_t feedrate_percentage; -#define MMS_SCALED(MM_S) ((MM_S)*feedrate_percentage*0.01) +#define MMS_SCALED(MM_S) ((MM_S)*feedrate_percentage*0.01f) extern uint8_t active_extruder; @@ -141,7 +141,7 @@ void line_to_current_position(); void buffer_line_to_destination(const float fr_mm_s); #if IS_KINEMATIC - void prepare_uninterpolated_move_to_destination(const float fr_mm_s=0.0); + void prepare_uninterpolated_move_to_destination(const float fr_mm_s=0); #endif void prepare_move_to_destination(); @@ -149,10 +149,10 @@ void prepare_move_to_destination(); /** * Blocking movement and shorthand functions */ -void do_blocking_move_to(const float rx, const float ry, const float rz, const float &fr_mm_s=0.0); -void do_blocking_move_to_x(const float &rx, const float &fr_mm_s=0.0); -void do_blocking_move_to_z(const float &rz, const float &fr_mm_s=0.0); -void do_blocking_move_to_xy(const float &rx, const float &ry, const float &fr_mm_s=0.0); +void do_blocking_move_to(const float rx, const float ry, const float rz, const float &fr_mm_s=0); +void do_blocking_move_to_x(const float &rx, const float &fr_mm_s=0); +void do_blocking_move_to_z(const float &rz, const float &fr_mm_s=0); +void do_blocking_move_to_xy(const float &rx, const float &ry, const float &fr_mm_s=0); void setup_for_endstop_or_probe_move(); void clean_up_after_endstop_or_probe_move(); @@ -268,8 +268,8 @@ void homeaxis(const AxisEnum axis); // Return true if the given position is within the machine bounds. inline bool position_is_reachable(const float &rx, const float &ry) { // Add 0.001 margin to deal with float imprecision - return WITHIN(rx, X_MIN_POS - 0.001, X_MAX_POS + 0.001) - && WITHIN(ry, Y_MIN_POS - 0.001, Y_MAX_POS + 0.001); + return WITHIN(rx, X_MIN_POS - 0.001f, X_MAX_POS + 0.001f) + && WITHIN(ry, Y_MIN_POS - 0.001f, Y_MAX_POS + 0.001f); } #if HAS_BED_PROBE @@ -282,8 +282,8 @@ void homeaxis(const AxisEnum axis); */ inline bool position_is_reachable_by_probe(const float &rx, const float &ry) { return position_is_reachable(rx - (X_PROBE_OFFSET_FROM_EXTRUDER), ry - (Y_PROBE_OFFSET_FROM_EXTRUDER)) - && WITHIN(rx, MIN_PROBE_X - 0.001, MAX_PROBE_X + 0.001) - && WITHIN(ry, MIN_PROBE_Y - 0.001, MAX_PROBE_Y + 0.001); + && WITHIN(rx, MIN_PROBE_X - 0.001f, MAX_PROBE_X + 0.001f) + && WITHIN(ry, MIN_PROBE_Y - 0.001f, MAX_PROBE_Y + 0.001f); } #endif diff --git a/Marlin/src/module/planner.cpp b/Marlin/src/module/planner.cpp index 7da5403c6b..ccac328e4e 100644 --- a/Marlin/src/module/planner.cpp +++ b/Marlin/src/module/planner.cpp @@ -150,11 +150,11 @@ float Planner::max_feedrate_mm_s[XYZE_N], // (mm/s) M203 XYZE - Max speeds int16_t Planner::flow_percentage[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(100); // Extrusion factor for each extruder -float Planner::e_factor[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(1.0); // The flow percentage and volumetric multiplier combine to scale E movement +float Planner::e_factor[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(1.0f); // The flow percentage and volumetric multiplier combine to scale E movement #if DISABLED(NO_VOLUMETRICS) float Planner::filament_size[EXTRUDERS], // diameter of filament (in millimeters), typically around 1.75 or 2.85, 0 disables the volumetric calculations for the extruder - Planner::volumetric_area_nominal = CIRCLE_AREA((DEFAULT_NOMINAL_FILAMENT_DIA) * 0.5), // Nominal cross-sectional area + Planner::volumetric_area_nominal = CIRCLE_AREA((float(DEFAULT_NOMINAL_FILAMENT_DIA)) * 0.5f), // Nominal cross-sectional area Planner::volumetric_multiplier[EXTRUDERS]; // Reciprocal of cross-sectional area of filament (in mm^2). Pre-calculated to reduce computation in the planner #endif @@ -188,7 +188,7 @@ float Planner::e_factor[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(1.0); // The flow perce #if ENABLED(AUTOTEMP) float Planner::autotemp_max = 250, Planner::autotemp_min = 210, - Planner::autotemp_factor = 0.1; + Planner::autotemp_factor = 0.1f; bool Planner::autotemp_enabled = false; #endif @@ -236,7 +236,7 @@ void Planner::init() { ZERO(position_float); #endif ZERO(previous_speed); - previous_nominal_speed_sqr = 0.0; + previous_nominal_speed_sqr = 0; #if ABL_PLANAR bed_level_matrix.set_to_identity(); #endif @@ -859,7 +859,7 @@ void Planner::reverse_pass_kernel(block_t* const current, const block_t * const const float new_entry_speed_sqr = TEST(current->flag, BLOCK_BIT_NOMINAL_LENGTH) ? max_entry_speed_sqr - : MIN(max_entry_speed_sqr, max_allowable_speed_sqr(-current->acceleration, next ? next->entry_speed_sqr : sq(MINIMUM_PLANNER_SPEED), current->millimeters)); + : MIN(max_entry_speed_sqr, max_allowable_speed_sqr(-current->acceleration, next ? next->entry_speed_sqr : sq(float(MINIMUM_PLANNER_SPEED)), current->millimeters)); if (current->entry_speed_sqr != new_entry_speed_sqr) { // Need to recalculate the block speed - Mark it now, so the stepper @@ -1076,7 +1076,7 @@ void Planner::recalculate_trapezoids() { // NOTE: Entry and exit factors always > 0 by all previous logic operations. const float current_nominal_speed = SQRT(current->nominal_speed_sqr), - nomr = 1.0 / current_nominal_speed; + nomr = 1.0f / current_nominal_speed; calculate_trapezoid_for_block(current, current_entry_speed * nomr, next_entry_speed * nomr); #if ENABLED(LIN_ADVANCE) if (current->use_advance_lead) { @@ -1115,8 +1115,8 @@ void Planner::recalculate_trapezoids() { // Block is not BUSY, we won the race against the Stepper ISR: const float next_nominal_speed = SQRT(next->nominal_speed_sqr), - nomr = 1.0 / next_nominal_speed; - calculate_trapezoid_for_block(next, next_entry_speed * nomr, (MINIMUM_PLANNER_SPEED) * nomr); + nomr = 1.0f / next_nominal_speed; + calculate_trapezoid_for_block(next, next_entry_speed * nomr, float(MINIMUM_PLANNER_SPEED) * nomr); #if ENABLED(LIN_ADVANCE) if (next->use_advance_lead) { const float comp = next->e_D_ratio * extruder_advance_K * axis_steps_per_mm[E_AXIS]; @@ -1162,7 +1162,7 @@ void Planner::recalculate() { float t = autotemp_min + high * autotemp_factor; t = constrain(t, autotemp_min, autotemp_max); - if (t < oldt) t = t * (1 - (AUTOTEMP_OLDWEIGHT)) + oldt * (AUTOTEMP_OLDWEIGHT); + if (t < oldt) t = t * (1 - float(AUTOTEMP_OLDWEIGHT)) + oldt * float(AUTOTEMP_OLDWEIGHT); oldt = t; thermalManager.setTargetHotend(t, 0); } @@ -1317,7 +1317,7 @@ void Planner::check_axes_activity() { * Return 1.0 with volumetric off or a diameter of 0.0. */ inline float calculate_volumetric_multiplier(const float &diameter) { - return (parser.volumetric_enabled && diameter) ? 1.0 / CIRCLE_AREA(diameter * 0.5) : 1.0; + return (parser.volumetric_enabled && diameter) ? RECIPROCAL(CIRCLE_AREA(diameter * 0.5f)) : 1; } /** @@ -1341,11 +1341,11 @@ void Planner::check_axes_activity() { */ void Planner::calculate_volumetric_for_width_sensor(const int8_t encoded_ratio) { // Reconstitute the nominal/measured ratio - const float nom_meas_ratio = 1.0 + 0.01 * encoded_ratio, + const float nom_meas_ratio = 1 + 0.01f * encoded_ratio, ratio_2 = sq(nom_meas_ratio); volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM] = parser.volumetric_enabled - ? ratio_2 / CIRCLE_AREA(filament_width_nominal * 0.5) // Volumetric uses a true volumetric multiplier + ? ratio_2 / CIRCLE_AREA(filament_width_nominal * 0.5f) // Volumetric uses a true volumetric multiplier : ratio_2; // Linear squares the ratio, which scales the volume refresh_e_factor(FILAMENT_SENSOR_EXTRUDER_NUM); @@ -1690,7 +1690,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move, if (de < 0) SBI(dm, E_AXIS); const float esteps_float = de * e_factor[extruder]; - const uint32_t esteps = ABS(esteps_float) + 0.5; + const uint32_t esteps = ABS(esteps_float) + 0.5f; // Clear all flags, including the "busy" bit block->flag = 0x00; @@ -1957,7 +1957,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move, // Slow down when the buffer starts to empty, rather than wait at the corner for a buffer refill #if ENABLED(SLOWDOWN) || ENABLED(ULTRA_LCD) || defined(XY_FREQUENCY_LIMIT) // Segment time im micro seconds - uint32_t segment_time_us = LROUND(1000000.0 / inverse_secs); + uint32_t segment_time_us = LROUND(1000000.0f / inverse_secs); #endif #if ENABLED(SLOWDOWN) @@ -1965,7 +1965,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move, if (segment_time_us < min_segment_time_us) { // buffer is draining, add extra time. The amount of time added increases if the buffer is still emptied more. const uint32_t nst = segment_time_us + LROUND(2 * (min_segment_time_us - segment_time_us) / moves_queued); - inverse_secs = 1000000.0 / nst; + inverse_secs = 1000000.0f / nst; #if defined(XY_FREQUENCY_LIMIT) || ENABLED(ULTRA_LCD) segment_time_us = nst; #endif @@ -2005,7 +2005,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move, while (filwidth_delay_dist >= MMD_MM) filwidth_delay_dist -= MMD_MM; // Convert into an index into the measurement array - filwidth_delay_index[0] = int8_t(filwidth_delay_dist * 0.1); + filwidth_delay_index[0] = int8_t(filwidth_delay_dist * 0.1f); // If the index has changed (must have gone forward)... if (filwidth_delay_index[0] != filwidth_delay_index[1]) { @@ -2021,7 +2021,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move, #endif // Calculate and limit speed in mm/sec for each axis - float current_speed[NUM_AXIS], speed_factor = 1.0; // factor <1 decreases speed + float current_speed[NUM_AXIS], speed_factor = 1.0f; // factor <1 decreases speed LOOP_XYZE(i) { const float cs = ABS((current_speed[i] = delta_mm[i] * inverse_secs)); #if ENABLED(DISTINCT_E_FACTORS) @@ -2069,7 +2069,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move, #endif // XY_FREQUENCY_LIMIT // Correct the speed - if (speed_factor < 1.0) { + if (speed_factor < 1.0f) { LOOP_XYZE(i) current_speed[i] *= speed_factor; block->nominal_rate *= speed_factor; block->nominal_speed_sqr = block->nominal_speed_sqr * sq(speed_factor); @@ -2142,7 +2142,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move, // Check for unusual high e_D ratio to detect if a retract move was combined with the last print move due to min. steps per segment. Never execute this with advance! // This assumes no one will use a retract length of 0mm < retr_length < ~0.2mm and no one will print 100mm wide lines using 3mm filament or 35mm wide lines using 1.75mm filament. - if (block->e_D_ratio > 3.0) + if (block->e_D_ratio > 3.0f) block->use_advance_lead = false; else { const uint32_t max_accel_steps_per_s2 = MAX_E_JERK / (extruder_advance_K * block->e_D_ratio) * steps_per_mm; @@ -2177,7 +2177,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move, block->acceleration_steps_per_s2 = accel; block->acceleration = accel / steps_per_mm; #if DISABLED(S_CURVE_ACCELERATION) - block->acceleration_rate = (uint32_t)(accel * (4096.0 * 4096.0 / (STEPPER_TIMER_RATE))); + block->acceleration_rate = (uint32_t)(accel * (4096.0f * 4096.0f / (STEPPER_TIMER_RATE))); #endif #if ENABLED(LIN_ADVANCE) if (block->use_advance_lead) { @@ -2250,12 +2250,12 @@ bool Planner::_populate_block(block_t * const block, bool split_move, ; // NOTE: Computed without any expensive trig, sin() or acos(), by trig half angle identity of cos(theta). - if (junction_cos_theta > 0.999999) { + if (junction_cos_theta > 0.999999f) { // For a 0 degree acute junction, just set minimum junction speed. - vmax_junction_sqr = sq(MINIMUM_PLANNER_SPEED); + vmax_junction_sqr = sq(float(MINIMUM_PLANNER_SPEED)); } else { - NOLESS(junction_cos_theta, -0.999999); // Check for numerical round-off to avoid divide by zero. + NOLESS(junction_cos_theta, -0.999999f); // Check for numerical round-off to avoid divide by zero. // Convert delta vector to unit vector float junction_unit_vec[XYZE] = { @@ -2267,13 +2267,13 @@ bool Planner::_populate_block(block_t * const block, bool split_move, normalize_junction_vector(junction_unit_vec); const float junction_acceleration = limit_value_by_axis_maximum(block->acceleration, junction_unit_vec), - sin_theta_d2 = SQRT(0.5 * (1.0 - junction_cos_theta)); // Trig half angle identity. Always positive. + sin_theta_d2 = SQRT(0.5f * (1.0f - junction_cos_theta)); // Trig half angle identity. Always positive. - vmax_junction_sqr = (junction_acceleration * junction_deviation_mm * sin_theta_d2) / (1.0 - sin_theta_d2); - if (block->millimeters < 1.0) { + vmax_junction_sqr = (junction_acceleration * junction_deviation_mm * sin_theta_d2) / (1.0f - sin_theta_d2); + if (block->millimeters < 1) { // Fast acos approximation, minus the error bar to be safe - const float junction_theta = (RADIANS(-40) * sq(junction_cos_theta) - RADIANS(50)) * junction_cos_theta + RADIANS(90) - 0.18; + const float junction_theta = (RADIANS(-40) * sq(junction_cos_theta) - RADIANS(50)) * junction_cos_theta + RADIANS(90) - 0.18f; // If angle is greater than 135 degrees (octagon), find speed for approximate arc if (junction_theta > RADIANS(135)) { @@ -2287,7 +2287,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move, vmax_junction_sqr = MIN3(vmax_junction_sqr, block->nominal_speed_sqr, previous_nominal_speed_sqr); } else // Init entry speed to zero. Assume it starts from rest. Planner will correct this later. - vmax_junction_sqr = 0.0; + vmax_junction_sqr = 0; COPY(previous_unit_vec, unit_vec); @@ -2378,11 +2378,11 @@ bool Planner::_populate_block(block_t * const block, bool split_move, block->max_entry_speed_sqr = vmax_junction_sqr; // Initialize block entry speed. Compute based on deceleration to user-defined MINIMUM_PLANNER_SPEED. - const float v_allowable_sqr = max_allowable_speed_sqr(-block->acceleration, sq(MINIMUM_PLANNER_SPEED), block->millimeters); + const float v_allowable_sqr = max_allowable_speed_sqr(-block->acceleration, sq(float(MINIMUM_PLANNER_SPEED)), block->millimeters); // If we are trying to add a split block, start with the // max. allowed speed to avoid an interrupted first move. - block->entry_speed_sqr = !split_move ? sq(MINIMUM_PLANNER_SPEED) : MIN(vmax_junction_sqr, v_allowable_sqr); + block->entry_speed_sqr = !split_move ? sq(float(MINIMUM_PLANNER_SPEED)) : MIN(vmax_junction_sqr, v_allowable_sqr); // Initialize planner efficiency flags // Set flag if block will always reach maximum junction speed regardless of entry/exit speeds. diff --git a/Marlin/src/module/planner.h b/Marlin/src/module/planner.h index c3a912b46c..c362bf0f4b 100644 --- a/Marlin/src/module/planner.h +++ b/Marlin/src/module/planner.h @@ -324,7 +324,7 @@ class Planner { static void refresh_positioning(); FORCE_INLINE static void refresh_e_factor(const uint8_t e) { - e_factor[e] = (flow_percentage[e] * 0.01 + e_factor[e] = (flow_percentage[e] * 0.01f #if DISABLED(NO_VOLUMETRICS) * volumetric_multiplier[e] #endif @@ -362,19 +362,19 @@ class Planner { * Returns 0.0 if Z is past the specified 'Fade Height'. */ inline static float fade_scaling_factor_for_z(const float &rz) { - static float z_fade_factor = 1.0; + static float z_fade_factor = 1; if (z_fade_height) { - if (rz >= z_fade_height) return 0.0; + if (rz >= z_fade_height) return 0; if (last_fade_z != rz) { last_fade_z = rz; - z_fade_factor = 1.0 - rz * inverse_z_fade_height; + z_fade_factor = 1 - rz * inverse_z_fade_height; } return z_fade_factor; } - return 1.0; + return 1; } - FORCE_INLINE static void force_fade_recalc() { last_fade_z = -999.999; } + FORCE_INLINE static void force_fade_recalc() { last_fade_z = -999.999f; } FORCE_INLINE static void set_z_fade_height(const float &zfh) { z_fade_height = zfh > 0 ? zfh : 0; @@ -390,7 +390,7 @@ class Planner { FORCE_INLINE static float fade_scaling_factor_for_z(const float &rz) { UNUSED(rz); - return 1.0; + return 1; } FORCE_INLINE static bool leveling_active_at_z(const float &rz) { UNUSED(rz); return true; } @@ -831,9 +831,9 @@ class Planner { #if ENABLED(JUNCTION_DEVIATION) FORCE_INLINE static void normalize_junction_vector(float (&vector)[XYZE]) { - float magnitude_sq = 0.0; + float magnitude_sq = 0; LOOP_XYZE(idx) if (vector[idx]) magnitude_sq += sq(vector[idx]); - const float inv_magnitude = 1.0 / SQRT(magnitude_sq); + const float inv_magnitude = RSQRT(magnitude_sq); LOOP_XYZE(idx) vector[idx] *= inv_magnitude; } diff --git a/Marlin/src/module/planner_bezier.cpp b/Marlin/src/module/planner_bezier.cpp index caf2528895..407d8a0670 100644 --- a/Marlin/src/module/planner_bezier.cpp +++ b/Marlin/src/module/planner_bezier.cpp @@ -40,12 +40,12 @@ #include "../gcode/queue.h" // See the meaning in the documentation of cubic_b_spline(). -#define MIN_STEP 0.002 -#define MAX_STEP 0.1 -#define SIGMA 0.1 +#define MIN_STEP 0.002f +#define MAX_STEP 0.1f +#define SIGMA 0.1f // Compute the linear interpolation between two real numbers. -inline static float interp(float a, float b, float t) { return (1.0 - t) * a + t * b; } +inline static float interp(float a, float b, float t) { return (1 - t) * a + t * b; } /** * Compute a Bézier curve using the De Casteljau's algorithm (see @@ -114,7 +114,7 @@ void cubic_b_spline(const float position[NUM_AXIS], const float target[NUM_AXIS] first1 = position[Y_AXIS] + offset[1], second0 = target[X_AXIS] + offset[2], second1 = target[Y_AXIS] + offset[3]; - float t = 0.0; + float t = 0; float bez_target[4]; bez_target[X_AXIS] = position[X_AXIS]; @@ -123,7 +123,7 @@ void cubic_b_spline(const float position[NUM_AXIS], const float target[NUM_AXIS] millis_t next_idle_ms = millis() + 200UL; - while (t < 1.0) { + while (t < 1) { thermalManager.manage_heater(); millis_t now = millis(); @@ -136,16 +136,16 @@ void cubic_b_spline(const float position[NUM_AXIS], const float target[NUM_AXIS] // close to a linear interpolation. bool did_reduce = false; float new_t = t + step; - NOMORE(new_t, 1.0); + NOMORE(new_t, 1); float new_pos0 = eval_bezier(position[X_AXIS], first0, second0, target[X_AXIS], new_t), new_pos1 = eval_bezier(position[Y_AXIS], first1, second1, target[Y_AXIS], new_t); for (;;) { if (new_t - t < (MIN_STEP)) break; - const float candidate_t = 0.5 * (t + new_t), + const float candidate_t = 0.5f * (t + new_t), candidate_pos0 = eval_bezier(position[X_AXIS], first0, second0, target[X_AXIS], candidate_t), candidate_pos1 = eval_bezier(position[Y_AXIS], first1, second1, target[Y_AXIS], candidate_t), - interp_pos0 = 0.5 * (bez_target[X_AXIS] + new_pos0), - interp_pos1 = 0.5 * (bez_target[Y_AXIS] + new_pos1); + interp_pos0 = 0.5f * (bez_target[X_AXIS] + new_pos0), + interp_pos1 = 0.5f * (bez_target[Y_AXIS] + new_pos1); if (dist1(candidate_pos0, candidate_pos1, interp_pos0, interp_pos1) <= (SIGMA)) break; new_t = candidate_t; new_pos0 = candidate_pos0; @@ -156,12 +156,12 @@ void cubic_b_spline(const float position[NUM_AXIS], const float target[NUM_AXIS] // If we did not reduce the step, maybe we should enlarge it. if (!did_reduce) for (;;) { if (new_t - t > MAX_STEP) break; - const float candidate_t = t + 2.0 * (new_t - t); - if (candidate_t >= 1.0) break; + const float candidate_t = t + 2 * (new_t - t); + if (candidate_t >= 1) break; const float candidate_pos0 = eval_bezier(position[X_AXIS], first0, second0, target[X_AXIS], candidate_t), candidate_pos1 = eval_bezier(position[Y_AXIS], first1, second1, target[Y_AXIS], candidate_t), - interp_pos0 = 0.5 * (bez_target[X_AXIS] + candidate_pos0), - interp_pos1 = 0.5 * (bez_target[Y_AXIS] + candidate_pos1); + interp_pos0 = 0.5f * (bez_target[X_AXIS] + candidate_pos0), + interp_pos1 = 0.5f * (bez_target[Y_AXIS] + candidate_pos1); if (dist1(new_pos0, new_pos1, interp_pos0, interp_pos1) > (SIGMA)) break; new_t = candidate_t; new_pos0 = candidate_pos0; diff --git a/Marlin/src/module/printcounter.cpp b/Marlin/src/module/printcounter.cpp index 66c6f2fbc4..44adcf45f2 100644 --- a/Marlin/src/module/printcounter.cpp +++ b/Marlin/src/module/printcounter.cpp @@ -53,7 +53,7 @@ millis_t PrintCounter::deltaDuration() { return lastDuration - tmp; } -void PrintCounter::incFilamentUsed(double const &amount) { +void PrintCounter::incFilamentUsed(float const &amount) { #if ENABLED(DEBUG_PRINTCOUNTER) debug(PSTR("incFilamentUsed")); #endif diff --git a/Marlin/src/module/printcounter.h b/Marlin/src/module/printcounter.h index db6f74606f..fa2f036314 100644 --- a/Marlin/src/module/printcounter.h +++ b/Marlin/src/module/printcounter.h @@ -37,13 +37,13 @@ #define STATS_EEPROM_ADDRESS 0x32 #endif -struct printStatistics { // 16 bytes (20 with real doubles) +struct printStatistics { // 16 bytes //const uint8_t magic; // Magic header, it will always be 0x16 uint16_t totalPrints; // Number of prints uint16_t finishedPrints; // Number of complete prints uint32_t printTime; // Accumulated printing time uint32_t longestPrint; // Longest successful print job - double filamentUsed; // Accumulated filament consumed in mm + float filamentUsed; // Accumulated filament consumed in mm }; class PrintCounter: public Stopwatch { @@ -128,7 +128,7 @@ class PrintCounter: public Stopwatch { * * @param amount The amount of filament used in mm */ - static void incFilamentUsed(double const &amount); + static void incFilamentUsed(float const &amount); /** * @brief Reset the Print Statistics diff --git a/Marlin/src/module/probe.cpp b/Marlin/src/module/probe.cpp index 3cf79708dd..f9eb04c409 100644 --- a/Marlin/src/module/probe.cpp +++ b/Marlin/src/module/probe.cpp @@ -625,7 +625,7 @@ static float run_z_probe() { #if MULTIPLE_PROBING > 2 // Return the average value of all probes - const float measured_z = probes_total * (1.0 / (MULTIPLE_PROBING)); + const float measured_z = probes_total * (1.0f / (MULTIPLE_PROBING)); #elif MULTIPLE_PROBING == 2 diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp index 925032a9ec..78e0b0e204 100644 --- a/Marlin/src/module/temperature.cpp +++ b/Marlin/src/module/temperature.cpp @@ -393,13 +393,13 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS]; SERIAL_PROTOCOLPAIR(MSG_T_MIN, min); SERIAL_PROTOCOLPAIR(MSG_T_MAX, max); if (cycles > 2) { - Ku = (4.0 * d) / (M_PI * (max - min) * 0.5); - Tu = ((float)(t_low + t_high) * 0.001); + Ku = (4.0f * d) / (float(M_PI) * (max - min) * 0.5f); + Tu = ((float)(t_low + t_high) * 0.001f); SERIAL_PROTOCOLPAIR(MSG_KU, Ku); SERIAL_PROTOCOLPAIR(MSG_TU, Tu); - workKp = 0.6 * Ku; + workKp = 0.6f * Ku; workKi = 2 * workKp / Tu; - workKd = workKp * Tu * 0.125; + workKd = workKp * Tu * 0.125f; SERIAL_PROTOCOLLNPGM("\n" MSG_CLASSIC_PID); SERIAL_PROTOCOLPAIR(MSG_KP, workKp); SERIAL_PROTOCOLPAIR(MSG_KI, workKi); @@ -644,7 +644,7 @@ float Temperature::get_pid_output(const int8_t e) { #if ENABLED(PIDTEMP) #if DISABLED(PID_OPENLOOP) pid_error[HOTEND_INDEX] = target_temperature[HOTEND_INDEX] - current_temperature[HOTEND_INDEX]; - dTerm[HOTEND_INDEX] = PID_K2 * PID_PARAM(Kd, HOTEND_INDEX) * (current_temperature[HOTEND_INDEX] - temp_dState[HOTEND_INDEX]) + PID_K1 * dTerm[HOTEND_INDEX]; + dTerm[HOTEND_INDEX] = PID_K2 * PID_PARAM(Kd, HOTEND_INDEX) * (current_temperature[HOTEND_INDEX] - temp_dState[HOTEND_INDEX]) + float(PID_K1) * dTerm[HOTEND_INDEX]; temp_dState[HOTEND_INDEX] = current_temperature[HOTEND_INDEX]; #if HEATER_IDLE_HANDLER if (heater_idle_timeout_exceeded[HOTEND_INDEX]) { @@ -1098,7 +1098,7 @@ void Temperature::updateTemperaturesFromRawValues() { // Convert raw Filament Width to millimeters float Temperature::analog2widthFil() { - return current_raw_filwidth * 5.0 * (1.0 / 16383.0); + return current_raw_filwidth * 5.0f * (1.0f / 16383.0f); } /** @@ -1111,7 +1111,7 @@ void Temperature::updateTemperaturesFromRawValues() { */ int8_t Temperature::widthFil_to_size_ratio() { if (ABS(filament_width_nominal - filament_width_meas) <= FILWIDTH_ERROR_MARGIN) - return int(100.0 * filament_width_nominal / filament_width_meas) - 100; + return int(100.0f * filament_width_nominal / filament_width_meas) - 100; return 0; } diff --git a/Marlin/src/module/temperature.h b/Marlin/src/module/temperature.h index bc9aa9a766..08c5e508a9 100644 --- a/Marlin/src/module/temperature.h +++ b/Marlin/src/module/temperature.h @@ -100,14 +100,14 @@ enum ADCSensorState : char { #define ACTUAL_ADC_SAMPLES MAX(int(MIN_ADC_ISR_LOOPS), int(SensorsReady)) #if HAS_PID_HEATING - #define PID_K2 (1.0-PID_K1) + #define PID_K2 (1-float(PID_K1)) #define PID_dT ((OVERSAMPLENR * float(ACTUAL_ADC_SAMPLES)) / TEMP_TIMER_FREQUENCY) // Apply the scale factors to the PID values - #define scalePID_i(i) ( (i) * PID_dT ) - #define unscalePID_i(i) ( (i) / PID_dT ) - #define scalePID_d(d) ( (d) / PID_dT ) - #define unscalePID_d(d) ( (d) * PID_dT ) + #define scalePID_i(i) ( float(i) * PID_dT ) + #define unscalePID_i(i) ( float(i) / PID_dT ) + #define scalePID_d(d) ( float(d) / PID_dT ) + #define unscalePID_d(d) ( float(d) * PID_dT ) #endif class Temperature {