diff --git a/Marlin/src/HAL/HAL_DUE/HAL_Due.h b/Marlin/src/HAL/HAL_DUE/HAL_Due.h
index ab12a11e97..f3c50927f2 100644
--- a/Marlin/src/HAL/HAL_DUE/HAL_Due.h
+++ b/Marlin/src/HAL/HAL_DUE/HAL_Due.h
@@ -41,15 +41,7 @@
// Defines
//
#define NUM_SERIAL 1
-
-//#undef SERIAL_PORT
-//#define SERIAL_PORT -1
-
-#if SERIAL_PORT == -1
- #define MYSERIAL0 SerialUSB
-#else
- #define MYSERIAL0 customizedSerial
-#endif
+#define MYSERIAL0 customizedSerial
// We need the previous define before the include, or compilation bombs...
#include "MarlinSerial_Due.h"
diff --git a/Marlin/src/HAL/HAL_DUE/HAL_spi_Due.cpp b/Marlin/src/HAL/HAL_DUE/HAL_spi_Due.cpp
index 0f31ac7f58..0f1aa47fc2 100644
--- a/Marlin/src/HAL/HAL_DUE/HAL_spi_Due.cpp
+++ b/Marlin/src/HAL/HAL_DUE/HAL_spi_Due.cpp
@@ -53,6 +53,7 @@
// --------------------------------------------------------------------------
#if ENABLED(SOFTWARE_SPI)
+
// --------------------------------------------------------------------------
// software SPI
// --------------------------------------------------------------------------
@@ -493,44 +494,77 @@
static pfnSpiTxBlock spiTxBlock = spiTxBlockX;
static pfnSpiRxBlock spiRxBlock = spiRxBlockX;
- void spiBegin() {
- SET_OUTPUT(SS_PIN);
- WRITE(SS_PIN, HIGH);
- SET_OUTPUT(SCK_PIN);
- SET_INPUT(MISO_PIN);
- SET_OUTPUT(MOSI_PIN);
- }
+ #if MB(ALLIGATOR) // control SDSS pin
+ void spiBegin() {
+ SET_OUTPUT(SS_PIN);
+ WRITE(SS_PIN, HIGH);
+ SET_OUTPUT(SCK_PIN);
+ SET_INPUT(MISO_PIN);
+ SET_OUTPUT(MOSI_PIN);
+ }
- uint8_t spiRec() {
- WRITE(SS_PIN, LOW);
- WRITE(MOSI_PIN, 1); /* Output 1s 1*/
- uint8_t b = spiTransferRx(0xFF);
- WRITE(SS_PIN, HIGH);
- return b;
- }
+ uint8_t spiRec() {
+ WRITE(SS_PIN, LOW);
+ WRITE(MOSI_PIN, 1); /* Output 1s 1*/
+ uint8_t b = spiTransferRx(0xFF);
+ WRITE(SS_PIN, HIGH);
+ return b;
+ }
- void spiRead(uint8_t* buf, uint16_t nbyte) {
- uint32_t todo = nbyte;
- if (todo == 0) return;
+ void spiRead(uint8_t* buf, uint16_t nbyte) {
+ uint32_t todo = nbyte;
+ if (todo == 0) return;
- WRITE(SS_PIN, LOW);
- WRITE(MOSI_PIN, 1); /* Output 1s 1*/
- spiRxBlock(buf,nbyte);
- WRITE(SS_PIN, HIGH);
- }
+ WRITE(SS_PIN, LOW);
+ WRITE(MOSI_PIN, 1); /* Output 1s 1*/
+ spiRxBlock(buf,nbyte);
+ WRITE(SS_PIN, HIGH);
+ }
- void spiSend(uint8_t b) {
- WRITE(SS_PIN, LOW);
- (void) spiTransferTx(b);
- WRITE(SS_PIN, HIGH);
- }
+ void spiSend(uint8_t b) {
+ WRITE(SS_PIN, LOW);
+ (void) spiTransferTx(b);
+ WRITE(SS_PIN, HIGH);
+ }
- void spiSendBlock(uint8_t token, const uint8_t* buf) {
+ void spiSendBlock(uint8_t token, const uint8_t* buf) {
+ WRITE(SS_PIN, LOW);
+ (void) spiTransferTx(token);
+ spiTxBlock(buf,512);
+ WRITE(SS_PIN, HIGH);
+
+ #else // let calling routine control SDSS
+ void spiBegin() {
+ SET_OUTPUT(SS_PIN);
+ SET_OUTPUT(SCK_PIN);
+ SET_INPUT(MISO_PIN);
+ SET_OUTPUT(MOSI_PIN);
+ }
- WRITE(SS_PIN, LOW);
- (void) spiTransferTx(token);
- spiTxBlock(buf,512);
- WRITE(SS_PIN, HIGH);
+ uint8_t spiRec() {
+ WRITE(MOSI_PIN, 1); /* Output 1s 1*/
+ uint8_t b = spiTransferRx(0xFF);
+ return b;
+ }
+
+ void spiRead(uint8_t* buf, uint16_t nbyte) {
+ uint32_t todo = nbyte;
+ if (todo == 0) return;
+
+ WRITE(MOSI_PIN, 1); /* Output 1s 1*/
+ spiRxBlock(buf,nbyte);
+ }
+
+ void spiSend(uint8_t b) {
+ (void) spiTransferTx(b);
+ }
+
+ void spiSendBlock(uint8_t token, const uint8_t* buf) {
+ (void) spiTransferTx(token);
+ spiTxBlock(buf,512);
+
+ #endif
+
}
/**
@@ -566,7 +600,9 @@
break;
}
- WRITE(SS_PIN, HIGH);
+ #if MB(ALLIGATOR)
+ WRITE(SS_PIN, HIGH);
+ #endif
WRITE(MOSI_PIN, HIGH);
WRITE(SCK_PIN, LOW);
}
@@ -574,211 +610,296 @@
/** Begin SPI transaction, set clock, bit order, data mode */
void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) {
// TODO: to be implemented
-
}
#pragma GCC reset_options
#else
- // --------------------------------------------------------------------------
- // hardware SPI
- // --------------------------------------------------------------------------
- // 8.4 MHz, 4 MHz, 2 MHz, 1 MHz, 0.5 MHz, 0.329 MHz, 0.329 MHz
- int spiDueDividors[] = { 10, 21, 42, 84, 168, 255, 255 };
- bool spiInitMaded = false;
-
- void spiBegin() {
- if(spiInitMaded == false) {
- // Configure SPI pins
- PIO_Configure(
- g_APinDescription[SCK_PIN].pPort,
- g_APinDescription[SCK_PIN].ulPinType,
- g_APinDescription[SCK_PIN].ulPin,
- g_APinDescription[SCK_PIN].ulPinConfiguration);
- PIO_Configure(
- g_APinDescription[MOSI_PIN].pPort,
- g_APinDescription[MOSI_PIN].ulPinType,
- g_APinDescription[MOSI_PIN].ulPin,
- g_APinDescription[MOSI_PIN].ulPinConfiguration);
- PIO_Configure(
- g_APinDescription[MISO_PIN].pPort,
- g_APinDescription[MISO_PIN].ulPinType,
- g_APinDescription[MISO_PIN].ulPin,
- g_APinDescription[MISO_PIN].ulPinConfiguration);
-
- // set master mode, peripheral select, fault detection
- SPI_Configure(SPI0, ID_SPI0, SPI_MR_MSTR | SPI_MR_MODFDIS | SPI_MR_PS);
- SPI_Enable(SPI0);
-
- #if MB(ALLIGATOR)
- SET_OUTPUT(DAC0_SYNC);
- #if EXTRUDERS > 1
- SET_OUTPUT(DAC1_SYNC);
- WRITE(DAC1_SYNC, HIGH);
- #endif
- SET_OUTPUT(SPI_EEPROM1_CS);
- SET_OUTPUT(SPI_EEPROM2_CS);
- SET_OUTPUT(SPI_FLASH_CS);
- WRITE(DAC0_SYNC, HIGH);
- WRITE(SPI_EEPROM1_CS, HIGH );
- WRITE(SPI_EEPROM2_CS, HIGH );
- WRITE(SPI_FLASH_CS, HIGH );
- WRITE(SS_PIN, HIGH );
- #endif // MB(ALLIGATOR)
-
- PIO_Configure(
- g_APinDescription[SPI_PIN].pPort,
- g_APinDescription[SPI_PIN].ulPinType,
- g_APinDescription[SPI_PIN].ulPin,
- g_APinDescription[SPI_PIN].ulPinConfiguration);
- spiInit(1);
- spiInitMaded = true;
+
+ #if MB(ALLIGATOR)
+
+ // slave selects controlled by SPI controller
+ // doesn't support changing SPI speeds for SD card
+
+ // --------------------------------------------------------------------------
+ // hardware SPI
+ // --------------------------------------------------------------------------
+ // 8.4 MHz, 4 MHz, 2 MHz, 1 MHz, 0.5 MHz, 0.329 MHz, 0.329 MHz
+ int spiDueDividors[] = { 10, 21, 42, 84, 168, 255, 255 };
+ bool spiInitMaded = false;
+
+ void spiBegin() {
+ if(spiInitMaded == false) {
+ // Configure SPI pins
+ PIO_Configure(
+ g_APinDescription[SCK_PIN].pPort,
+ g_APinDescription[SCK_PIN].ulPinType,
+ g_APinDescription[SCK_PIN].ulPin,
+ g_APinDescription[SCK_PIN].ulPinConfiguration);
+ PIO_Configure(
+ g_APinDescription[MOSI_PIN].pPort,
+ g_APinDescription[MOSI_PIN].ulPinType,
+ g_APinDescription[MOSI_PIN].ulPin,
+ g_APinDescription[MOSI_PIN].ulPinConfiguration);
+ PIO_Configure(
+ g_APinDescription[MISO_PIN].pPort,
+ g_APinDescription[MISO_PIN].ulPinType,
+ g_APinDescription[MISO_PIN].ulPin,
+ g_APinDescription[MISO_PIN].ulPinConfiguration);
+
+ // set master mode, peripheral select, fault detection
+ SPI_Configure(SPI0, ID_SPI0, SPI_MR_MSTR | SPI_MR_MODFDIS | SPI_MR_PS);
+ SPI_Enable(SPI0);
+
+ #if MB(ALLIGATOR)
+ SET_OUTPUT(DAC0_SYNC);
+ #if EXTRUDERS > 1
+ SET_OUTPUT(DAC1_SYNC);
+ WRITE(DAC1_SYNC, HIGH);
+ #endif
+ SET_OUTPUT(SPI_EEPROM1_CS);
+ SET_OUTPUT(SPI_EEPROM2_CS);
+ SET_OUTPUT(SPI_FLASH_CS);
+ WRITE(DAC0_SYNC, HIGH);
+ WRITE(SPI_EEPROM1_CS, HIGH );
+ WRITE(SPI_EEPROM2_CS, HIGH );
+ WRITE(SPI_FLASH_CS, HIGH );
+ WRITE(SS_PIN, HIGH );
+ #endif // MB(ALLIGATOR)
+
+ OUT_WRITE(SDSS,0);
+
+ PIO_Configure(
+ g_APinDescription[SPI_PIN].pPort,
+ g_APinDescription[SPI_PIN].ulPinType,
+ g_APinDescription[SPI_PIN].ulPin,
+ g_APinDescription[SPI_PIN].ulPinConfiguration);
+
+ spiInit(1);
+ spiInitMaded = true;
+ }
}
- }
- void spiInit(uint8_t spiRate) {
- if(spiInitMaded == false) {
- if(spiRate > 6) spiRate = 1;
+ void spiInit(uint8_t spiRate) {
+ if(spiInitMaded == false) {
+ if(spiRate > 6) spiRate = 1;
+
+ #if MB(ALLIGATOR)
+ // Set SPI mode 1, clock, select not active after transfer, with delay between transfers
+ SPI_ConfigureNPCS(SPI0, SPI_CHAN_DAC,
+ SPI_CSR_CSAAT | SPI_CSR_SCBR(spiDueDividors[spiRate]) |
+ SPI_CSR_DLYBCT(1));
+ // Set SPI mode 0, clock, select not active after transfer, with delay between transfers
+ SPI_ConfigureNPCS(SPI0, SPI_CHAN_EEPROM1, SPI_CSR_NCPHA |
+ SPI_CSR_CSAAT | SPI_CSR_SCBR(spiDueDividors[spiRate]) |
+ SPI_CSR_DLYBCT(1));
+ #endif//MB(ALLIGATOR)
- #if MB(ALLIGATOR)
- // Set SPI mode 1, clock, select not active after transfer, with delay between transfers
- SPI_ConfigureNPCS(SPI0, SPI_CHAN_DAC,
- SPI_CSR_CSAAT | SPI_CSR_SCBR(spiDueDividors[spiRate]) |
- SPI_CSR_DLYBCT(1));
// Set SPI mode 0, clock, select not active after transfer, with delay between transfers
- SPI_ConfigureNPCS(SPI0, SPI_CHAN_EEPROM1, SPI_CSR_NCPHA |
+ SPI_ConfigureNPCS(SPI0, SPI_CHAN, SPI_CSR_NCPHA |
SPI_CSR_CSAAT | SPI_CSR_SCBR(spiDueDividors[spiRate]) |
SPI_CSR_DLYBCT(1));
- #endif//MB(ALLIGATOR)
-
- // Set SPI mode 0, clock, select not active after transfer, with delay between transfers
- SPI_ConfigureNPCS(SPI0, SPI_CHAN, SPI_CSR_NCPHA |
- SPI_CSR_CSAAT | SPI_CSR_SCBR(spiDueDividors[spiRate]) |
- SPI_CSR_DLYBCT(1));
- SPI_Enable(SPI0);
- spiInitMaded = true;
+ SPI_Enable(SPI0);
+ spiInitMaded = true;
+ }
}
- }
- // Write single byte to SPI
- void spiSend(byte b) {
- // write byte with address and end transmission flag
- SPI0->SPI_TDR = (uint32_t)b | SPI_PCS(SPI_CHAN) | SPI_TDR_LASTXFER;
- // wait for transmit register empty
- while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
- // wait for receive register
- while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
- // clear status
- SPI0->SPI_RDR;
- //delayMicroseconds(1U);
- }
-
- void spiSend(const uint8_t* buf, size_t n) {
- if (n == 0) return;
- for (size_t i = 0; i < n - 1; i++) {
- SPI0->SPI_TDR = (uint32_t)buf[i] | SPI_PCS(SPI_CHAN);
+ // Write single byte to SPI
+ void spiSend(byte b) {
+ // write byte with address and end transmission flag
+ SPI0->SPI_TDR = (uint32_t)b | SPI_PCS(SPI_CHAN) | SPI_TDR_LASTXFER;
+ // wait for transmit register empty
while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
+ // wait for receive register
while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
+ // clear status
SPI0->SPI_RDR;
//delayMicroseconds(1U);
}
- spiSend(buf[n - 1]);
- }
- void spiSend(uint32_t chan, byte b) {
- uint8_t dummy_read = 0;
- // wait for transmit register empty
- while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
- // write byte with address and end transmission flag
- SPI0->SPI_TDR = (uint32_t)b | SPI_PCS(chan) | SPI_TDR_LASTXFER;
- // wait for receive register
- while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
- // clear status
- while ((SPI0->SPI_SR & SPI_SR_RDRF) == 1)
- dummy_read = SPI0->SPI_RDR;
- UNUSED(dummy_read);
- }
+ void spiSend(const uint8_t* buf, size_t n) {
+ if (n == 0) return;
+ for (size_t i = 0; i < n - 1; i++) {
+ SPI0->SPI_TDR = (uint32_t)buf[i] | SPI_PCS(SPI_CHAN);
+ while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
+ while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
+ SPI0->SPI_RDR;
+ //delayMicroseconds(1U);
+ }
+ spiSend(buf[n - 1]);
+ }
- void spiSend(uint32_t chan, const uint8_t* buf, size_t n) {
- uint8_t dummy_read = 0;
- if (n == 0) return;
- for (int i = 0; i < (int)n - 1; i++) {
+ void spiSend(uint32_t chan, byte b) {
+ uint8_t dummy_read = 0;
+ // wait for transmit register empty
while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
- SPI0->SPI_TDR = (uint32_t)buf[i] | SPI_PCS(chan);
+ // write byte with address and end transmission flag
+ SPI0->SPI_TDR = (uint32_t)b | SPI_PCS(chan) | SPI_TDR_LASTXFER;
+ // wait for receive register
while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
+ // clear status
while ((SPI0->SPI_SR & SPI_SR_RDRF) == 1)
dummy_read = SPI0->SPI_RDR;
UNUSED(dummy_read);
}
- spiSend(chan, buf[n - 1]);
- }
-
- // Read single byte from SPI
- uint8_t spiRec() {
- // write dummy byte with address and end transmission flag
- SPI0->SPI_TDR = 0x000000FF | SPI_PCS(SPI_CHAN) | SPI_TDR_LASTXFER;
- // wait for transmit register empty
- while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
-
- // wait for receive register
- while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
- // get byte from receive register
- //delayMicroseconds(1U);
- return SPI0->SPI_RDR;
- }
- uint8_t spiRec(uint32_t chan) {
- uint8_t spirec_tmp;
- // wait for transmit register empty
- while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
- while ((SPI0->SPI_SR & SPI_SR_RDRF) == 1)
- spirec_tmp = SPI0->SPI_RDR;
- UNUSED(spirec_tmp);
-
- // write dummy byte with address and end transmission flag
- SPI0->SPI_TDR = 0x000000FF | SPI_PCS(chan) | SPI_TDR_LASTXFER;
-
- // wait for receive register
- while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
- // get byte from receive register
- return SPI0->SPI_RDR;
- }
+ void spiSend(uint32_t chan, const uint8_t* buf, size_t n) {
+ uint8_t dummy_read = 0;
+ if (n == 0) return;
+ for (int i = 0; i < (int)n - 1; i++) {
+ while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
+ SPI0->SPI_TDR = (uint32_t)buf[i] | SPI_PCS(chan);
+ while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
+ while ((SPI0->SPI_SR & SPI_SR_RDRF) == 1)
+ dummy_read = SPI0->SPI_RDR;
+ UNUSED(dummy_read);
+ }
+ spiSend(chan, buf[n - 1]);
+ }
- // Read from SPI into buffer
- void spiRead(uint8_t*buf, uint16_t nbyte) {
- if (nbyte-- == 0) return;
+ // Read single byte from SPI
+ uint8_t spiRec() {
+ // write dummy byte with address and end transmission flag
+ SPI0->SPI_TDR = 0x000000FF | SPI_PCS(SPI_CHAN) | SPI_TDR_LASTXFER;
+ // wait for transmit register empty
+ while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
- for (int i = 0; i < nbyte; i++) {
- //while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
- SPI0->SPI_TDR = 0x000000FF | SPI_PCS(SPI_CHAN);
+ // wait for receive register
while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
- buf[i] = SPI0->SPI_RDR;
+ // get byte from receive register
//delayMicroseconds(1U);
+ return SPI0->SPI_RDR;
}
- buf[nbyte] = spiRec();
- }
- // Write from buffer to SPI
- void spiSendBlock(uint8_t token, const uint8_t* buf) {
- SPI0->SPI_TDR = (uint32_t)token | SPI_PCS(SPI_CHAN);
- while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
- //while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
- //SPI0->SPI_RDR;
- for (int i = 0; i < 511; i++) {
- SPI0->SPI_TDR = (uint32_t)buf[i] | SPI_PCS(SPI_CHAN);
+ uint8_t spiRec(uint32_t chan) {
+ uint8_t spirec_tmp;
+ // wait for transmit register empty
while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
+ while ((SPI0->SPI_SR & SPI_SR_RDRF) == 1)
+ spirec_tmp = SPI0->SPI_RDR;
+ UNUSED(spirec_tmp);
+
+ // write dummy byte with address and end transmission flag
+ SPI0->SPI_TDR = 0x000000FF | SPI_PCS(chan) | SPI_TDR_LASTXFER;
+
+ // wait for receive register
while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
- SPI0->SPI_RDR;
- //delayMicroseconds(1U);
+ // get byte from receive register
+ return SPI0->SPI_RDR;
}
- spiSend(buf[511]);
- }
- /** Begin SPI transaction, set clock, bit order, data mode */
- void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) {
- // TODO: to be implemented
- }
+ // Read from SPI into buffer
+ void spiRead(uint8_t*buf, uint16_t nbyte) {
+ if (nbyte-- == 0) return;
+
+ for (int i = 0; i < nbyte; i++) {
+ //while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
+ SPI0->SPI_TDR = 0x000000FF | SPI_PCS(SPI_CHAN);
+ while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
+ buf[i] = SPI0->SPI_RDR;
+ //delayMicroseconds(1U);
+ }
+ buf[nbyte] = spiRec();
+ }
+
+ // Write from buffer to SPI
+ void spiSendBlock(uint8_t token, const uint8_t* buf) {
+ SPI0->SPI_TDR = (uint32_t)token | SPI_PCS(SPI_CHAN);
+ while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
+ //while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
+ //SPI0->SPI_RDR;
+ for (int i = 0; i < 511; i++) {
+ SPI0->SPI_TDR = (uint32_t)buf[i] | SPI_PCS(SPI_CHAN);
+ while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
+ while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
+ SPI0->SPI_RDR;
+ //delayMicroseconds(1U);
+ }
+ spiSend(buf[511]);
+ }
+
+ /** Begin SPI transaction, set clock, bit order, data mode */
+ void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) {
+ // TODO: to be implemented
+ }
+
+ #else // U8G compatible hardware SPI
+
+ void spiInit(uint8_t spiRate = 6 ) { // default to slowest rate if not specified)
+ // 8.4 MHz, 4 MHz, 2 MHz, 1 MHz, 0.5 MHz, 0.329 MHz, 0.329 MHz
+ int spiDueDividors[] = { 10, 21, 42, 84, 168, 255, 255 };
+ if(spiRate > 6) spiRate = 1;
+
+ /* enable PIOA and SPI0 */
+ REG_PMC_PCER0 = (1UL << ID_PIOA) | (1UL << ID_SPI0);
+
+ /* disable PIO on A26 and A27 */
+ REG_PIOA_PDR = 0x0c000000;
+ OUT_WRITE(SDSS, 1);
+
+ /* reset SPI0 (from sam lib) */
+ SPI0->SPI_CR = SPI_CR_SPIDIS;
+ SPI0->SPI_CR = SPI_CR_SWRST;
+ SPI0->SPI_CR = SPI_CR_SWRST;
+ SPI0->SPI_CR = SPI_CR_SPIEN;
+
+
+ /* master mode, no fault detection, chip select 0 */
+ SPI0->SPI_MR = SPI_MR_MSTR | SPI_MR_PCSDEC | SPI_MR_MODFDIS;
+
+ /* SPI mode 0, 8 Bit data transfer, baud rate */
+ SPI0->SPI_CSR[0] = SPI_CSR_SCBR(spiDueDividors[spiRate]) | 1;
+ }
+
+ static uint8_t spiTransfer(uint8_t data) {
+
+ /* wait until tx register is empty */
+ while( (SPI0->SPI_SR & SPI_SR_TDRE) == 0 );
+ /* send data */
+ SPI0->SPI_TDR = (uint32_t)data; // | SPI_PCS(0xF);
+
+ // wait for transmit register empty
+ while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
+
+ // wait for receive register
+ while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
+ // get byte from receive register
+ return SPI0->SPI_RDR;
+ }
+
+ void spiBegin() {
+ spiInit();
+ }
+
+ uint8_t spiRec() {
+ uint8_t data = spiTransfer(0xff);
+ return data;
+ }
+
+ void spiRead(uint8_t*buf, uint16_t nbyte) {
+ if (nbyte == 0) return;
+ for (int i = 0; i < nbyte; i++) {
+ buf[i] = spiTransfer(0xff);
+ }
+ }
+
+ void spiSend(uint8_t data) {
+ spiTransfer(data);
+ }
+
+ void spiSend(const uint8_t* buf, size_t n) {
+ if (n == 0) return;
+ for (uint16_t i = 0; i < n; i++)
+ spiTransfer(buf[i]);
+ }
+ void spiSendBlock(uint8_t token, const uint8_t* buf) {
+ spiTransfer(token);
+ for (uint16_t i = 0; i < 512; i++)
+ spiTransfer(buf[i]);
+ }
+
+ #endif //MB(ALLIGATOR)
#endif // ENABLED(SOFTWARE_SPI)
#endif // ARDUINO_ARCH_SAM
diff --git a/Marlin/src/HAL/HAL_DUE/u8g_com_HAL_DUE_shared_hw_spi.cpp b/Marlin/src/HAL/HAL_DUE/u8g_com_HAL_DUE_shared_hw_spi.cpp
new file mode 100644
index 0000000000..98c065fba3
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/u8g_com_HAL_DUE_shared_hw_spi.cpp
@@ -0,0 +1,163 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016, 2017, 2018 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+
+/*
+
+ based on u8g_com_msp430_hw_spi.c
+
+ Universal 8bit Graphics Library
+
+ Copyright (c) 2012, olikraus@gmail.com
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without modification,
+ are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice, this list
+ of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or other
+ materials provided with the distribution.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*/
+
+
+#ifdef __SAM3X8E__
+
+// #include
+
+// #include "src/core/macros.h"
+// #include "Configuration.h"
+#include "../../Marlin.h"
+#include "../../inc/MarlinConfig.h"
+
+ #include
+
+ #define SPI_FULL_SPEED 0
+ #define SPI_HALF_SPEED 1
+ #define SPI_QUARTER_SPEED 2
+ #define SPI_EIGHTH_SPEED 3
+ #define SPI_SIXTEENTH_SPEED 4
+ #define SPI_SPEED_5 5
+ #define SPI_SPEED_6 6
+
+ void spiBegin();
+ void spiInit(uint8_t spiRate);
+ void spiSend(uint8_t b);
+ void spiSend(const uint8_t* buf, size_t n);
+
+ #include
+ #include "../../core/macros.h"
+ #include "fastio_Due.h"
+
+
+ void u8g_SetPIOutput_DUE_hw_spi(u8g_t *u8g, uint8_t pin_index) {
+ PIO_Configure(g_APinDescription[u8g->pin_list[pin_index]].pPort, PIO_OUTPUT_1,
+ g_APinDescription[u8g->pin_list[pin_index]].ulPin, g_APinDescription[u8g->pin_list[pin_index]].ulPinConfiguration); // OUTPUT
+ }
+
+ void u8g_SetPILevel_DUE_hw_spi(u8g_t *u8g, uint8_t pin_index, uint8_t level) {
+ volatile Pio* port = g_APinDescription[u8g->pin_list[pin_index]].pPort;
+ uint32_t mask = g_APinDescription[u8g->pin_list[pin_index]].ulPin;
+ if (level) port->PIO_SODR = mask;
+ else port->PIO_CODR = mask;
+ }
+
+ uint8_t u8g_com_HAL_DUE_shared_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+ {
+ switch(msg)
+ {
+ case U8G_COM_MSG_STOP:
+ break;
+
+ case U8G_COM_MSG_INIT:
+ u8g_SetPILevel_DUE_hw_spi(u8g, U8G_PI_CS, 1);
+ u8g_SetPILevel_DUE_hw_spi(u8g, U8G_PI_A0, 1);
+
+ u8g_SetPIOutput_DUE_hw_spi(u8g, U8G_PI_CS);
+ u8g_SetPIOutput_DUE_hw_spi(u8g, U8G_PI_A0);
+
+ u8g_Delay(5);
+
+ spiBegin();
+
+ #ifndef SPI_SPEED
+ #define SPI_SPEED SPI_FULL_SPEED // use same SPI speed as SD card
+ #endif
+ spiInit(2);
+
+ break;
+
+ case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
+ u8g_SetPILevel_DUE_hw_spi(u8g, U8G_PI_A0, arg_val);
+ break;
+
+ case U8G_COM_MSG_CHIP_SELECT:
+ u8g_SetPILevel_DUE_hw_spi(u8g, U8G_PI_CS, (arg_val ? 0 : 1));
+ break;
+
+ case U8G_COM_MSG_RESET:
+ break;
+
+ case U8G_COM_MSG_WRITE_BYTE:
+
+ spiSend((uint8_t)arg_val);
+ break;
+
+ case U8G_COM_MSG_WRITE_SEQ: {
+ uint8_t *ptr = (uint8_t*) arg_ptr;
+ while (arg_val > 0) {
+ spiSend(*ptr++);
+ arg_val--;
+ }
+ }
+ break;
+
+ case U8G_COM_MSG_WRITE_SEQ_P: {
+ uint8_t *ptr = (uint8_t*) arg_ptr;
+ while (arg_val > 0) {
+ spiSend(*ptr++);
+ arg_val--;
+ }
+ }
+ break;
+ }
+ return 1;
+ }
+
+#endif //__SAM3X8E__
diff --git a/Marlin/src/config/examples/MakerParts/Configuration.h b/Marlin/src/config/examples/MakerParts/Configuration.h
index 2530bfb0a4..d82f8c493b 100644
--- a/Marlin/src/config/examples/MakerParts/Configuration.h
+++ b/Marlin/src/config/examples/MakerParts/Configuration.h
@@ -125,7 +125,7 @@
*
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
*/
-#define SERIAL_PORT 0
+#define SERIAL_PORT -1
/**
* Select a secondary serial port on the board to use for communication with the host.
@@ -134,7 +134,7 @@
*
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
*/
-#define SERIAL_PORT_2 -1
+#define SERIAL_PORT_2 0
/**
* This setting determines the communication speed of the printer.
diff --git a/Marlin/src/gcode/queue.cpp b/Marlin/src/gcode/queue.cpp
index 67471cb80e..94b27abce2 100644
--- a/Marlin/src/gcode/queue.cpp
+++ b/Marlin/src/gcode/queue.cpp
@@ -517,7 +517,7 @@ void advance_command_queue() {
card.closefile();
SERIAL_PROTOCOLLNPGM(MSG_FILE_SAVED);
- #ifndef USBCON
+ #if !defined(__AVR__) || !defined(USBCON)
#if ENABLED(SERIAL_STATS_DROPPED_RX)
SERIAL_ECHOLNPAIR("Dropped bytes: ", customizedSerial.dropped());
#endif
@@ -525,7 +525,7 @@ void advance_command_queue() {
#if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
SERIAL_ECHOLNPAIR("Max RX Queue Size: ", customizedSerial.rxMaxEnqueued());
#endif
- #endif // !USBCON
+ #endif // !defined(__AVR__) || !defined(USBCON)
ok_to_send();
}
diff --git a/Marlin/src/inc/Conditionals_adv.h b/Marlin/src/inc/Conditionals_adv.h
index bfefb8991c..289f174373 100644
--- a/Marlin/src/inc/Conditionals_adv.h
+++ b/Marlin/src/inc/Conditionals_adv.h
@@ -28,7 +28,7 @@
#ifndef CONDITIONALS_ADV_H
#define CONDITIONALS_ADV_H
- #ifndef USBCON
+ #if !defined(__AVR__) || !defined(USBCON)
// Define constants and variables for buffering serial data.
// Use only 0 or powers of 2 greater than 1
// : [0, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, ...]
diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h
index 93fee1b4d7..fe7ca7553c 100644
--- a/Marlin/src/inc/SanityCheck.h
+++ b/Marlin/src/inc/SanityCheck.h
@@ -275,7 +275,7 @@
/**
* Serial
*/
-#ifndef USBCON
+#if !defined(__AVR__) || !defined(USBCON)
#if ENABLED(SERIAL_XON_XOFF) && RX_BUFFER_SIZE < 1024
#error "SERIAL_XON_XOFF requires RX_BUFFER_SIZE >= 1024 for reliable transfers without drops."
#elif RX_BUFFER_SIZE && (RX_BUFFER_SIZE < 2 || !IS_POWER_OF_2(RX_BUFFER_SIZE))
@@ -1308,7 +1308,7 @@ static_assert(1 >= 0
/**
* emergency-command parser
*/
-#if ENABLED(EMERGENCY_PARSER) && defined(USBCON)
+#if ENABLED(EMERGENCY_PARSER) && defined(__AVR__) && defined(USBCON)
#error "EMERGENCY_PARSER does not work on boards with AT90USB processors (USBCON)."
#endif
diff --git a/Marlin/src/lcd/dogm/u8g_dev_uc1701_mini12864_HAL.cpp b/Marlin/src/lcd/dogm/u8g_dev_uc1701_mini12864_HAL.cpp
new file mode 100644
index 0000000000..f7ff3aca0b
--- /dev/null
+++ b/Marlin/src/lcd/dogm/u8g_dev_uc1701_mini12864_HAL.cpp
@@ -0,0 +1,189 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016, 2017, 2018 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+
+/*
+
+ based on u8g_dev_uc1701_mini12864_HAL.c (dealextreme)
+
+ Universal 8bit Graphics Library
+
+ Copyright (c) 2011, olikraus@gmail.com
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without modification,
+ are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice, this list
+ of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or other
+ materials provided with the distribution.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+*/
+
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(DOGLCD)
+
+#include
+
+#include "HAL_LCD_com_defines.h"
+
+#define WIDTH 128
+#define HEIGHT 64
+#define PAGE_HEIGHT 8
+
+static const uint8_t u8g_dev_uc1701_mini12864_HAL_init_seq[] PROGMEM = {
+ U8G_ESC_CS(0), /* disable chip */
+ U8G_ESC_ADR(0), /* instruction mode */
+ U8G_ESC_RST(1), /* do reset low pulse with (1*16)+2 milliseconds */
+ U8G_ESC_CS(1), /* enable chip */
+
+ 0x0e2, /* soft reset */
+ 0x040, /* set display start line to 0 */
+ 0x0a0, /* ADC set to reverse */
+ 0x0c8, /* common output mode */
+ 0x0a6, /* display normal, bit val 0: LCD pixel off. */
+ 0x0a2, /* LCD bias 1/9 */
+ 0x02f, /* all power control circuits on */
+ 0x0f8, /* set booster ratio to */
+ 0x000, /* 4x */
+ 0x023, /* set V0 voltage resistor ratio to large */
+ 0x081, /* set contrast */
+ 0x027, /* contrast value */
+ 0x0ac, /* indicator */
+ 0x000, /* disable */
+ 0x0af, /* display on */
+
+ U8G_ESC_DLY(100), /* delay 100 ms */
+ 0x0a5, /* display all points, ST7565 */
+ U8G_ESC_DLY(100), /* delay 100 ms */
+ U8G_ESC_DLY(100), /* delay 100 ms */
+ 0x0a4, /* normal display */
+ U8G_ESC_CS(0), /* disable chip */
+ U8G_ESC_END /* end of sequence */
+};
+
+static const uint8_t u8g_dev_uc1701_mini12864_HAL_data_start[] PROGMEM = {
+ U8G_ESC_ADR(0), /* instruction mode */
+ U8G_ESC_CS(1), /* enable chip */
+ 0x010, /* set upper 4 bit of the col adr to 0 */
+ 0x000, /* set lower 4 bit of the col adr to 4 */
+ U8G_ESC_END /* end of sequence */
+};
+
+uint8_t u8g_dev_uc1701_mini12864_HAL_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+ switch(msg)
+ {
+ case U8G_DEV_MSG_INIT:
+ u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
+ u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1701_mini12864_HAL_init_seq);
+ break;
+ case U8G_DEV_MSG_STOP:
+ break;
+ case U8G_DEV_MSG_PAGE_NEXT:
+ {
+ u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+ u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1701_mini12864_HAL_data_start);
+ u8g_WriteByte(u8g, dev, 0x0b0 | pb->p.page); /* select current page */
+ u8g_SetAddress(u8g, dev, 1); /* data mode */
+ if ( u8g_pb_WriteBuffer(pb, u8g, dev) == 0 )
+ return 0;
+ u8g_SetChipSelect(u8g, dev, 0);
+ }
+ break;
+ case U8G_DEV_MSG_CONTRAST:
+ u8g_SetChipSelect(u8g, dev, 1);
+ u8g_SetAddress(u8g, dev, 0); /* instruction mode */
+ u8g_WriteByte(u8g, dev, 0x081);
+ u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2);
+ u8g_SetChipSelect(u8g, dev, 0);
+ return 1;
+ }
+ return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
+}
+
+uint8_t u8g_dev_uc1701_mini12864_HAL_2x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+ switch(msg)
+ {
+ case U8G_DEV_MSG_INIT:
+ u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
+ u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1701_mini12864_HAL_init_seq);
+ break;
+ case U8G_DEV_MSG_STOP:
+ break;
+ case U8G_DEV_MSG_PAGE_NEXT:
+ {
+ u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+
+ u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1701_mini12864_HAL_data_start);
+ u8g_WriteByte(u8g, dev, 0x0b0 | (2*pb->p.page)); /* select current page */
+ u8g_SetAddress(u8g, dev, 1); /* data mode */
+ u8g_WriteSequence(u8g, dev, pb->width, (uint8_t *)pb->buf);
+ u8g_SetChipSelect(u8g, dev, 0);
+
+ u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1701_mini12864_HAL_data_start);
+ u8g_WriteByte(u8g, dev, 0x0b0 | (2*pb->p.page+1)); /* select current page */
+ u8g_SetAddress(u8g, dev, 1); /* data mode */
+ u8g_WriteSequence(u8g, dev, pb->width, (uint8_t *)(pb->buf)+pb->width);
+ u8g_SetChipSelect(u8g, dev, 0);
+ }
+ break;
+ case U8G_DEV_MSG_CONTRAST:
+ u8g_SetChipSelect(u8g, dev, 1);
+ u8g_SetAddress(u8g, dev, 0); /* instruction mode */
+ u8g_WriteByte(u8g, dev, 0x081);
+ u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2);
+ u8g_SetChipSelect(u8g, dev, 0);
+ return 1;
+ }
+ return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
+}
+
+U8G_PB_DEV(u8g_dev_uc1701_mini12864_HAL_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_uc1701_mini12864_HAL_fn, U8G_COM_HAL_SW_SPI_FN);
+U8G_PB_DEV(u8g_dev_uc1701_mini12864_HAL_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_uc1701_mini12864_HAL_fn, U8G_COM_HAL_HW_SPI_FN);
+
+uint8_t u8g_dev_uc1701_mini12864_HAL_2x_buf[WIDTH*2] U8G_NOCOMMON ;
+u8g_pb_t u8g_dev_uc1701_mini12864_HAL_2x_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_uc1701_mini12864_HAL_2x_buf};
+u8g_dev_t u8g_dev_uc1701_mini12864_HAL_2x_sw_spi = { u8g_dev_uc1701_mini12864_HAL_2x_fn, &u8g_dev_uc1701_mini12864_HAL_2x_pb, U8G_COM_HAL_SW_SPI_FN };
+u8g_dev_t u8g_dev_uc1701_mini12864_HAL_2x_hw_spi = { u8g_dev_uc1701_mini12864_HAL_2x_fn, &u8g_dev_uc1701_mini12864_HAL_2x_pb, U8G_COM_HAL_HW_SPI_FN };
+
+#endif // DOGLCD
\ No newline at end of file
diff --git a/Marlin/src/pins/pins_DUE3DOM_MINI.h b/Marlin/src/pins/pins_DUE3DOM_MINI.h
index 7ea23835a1..9695e3ae42 100644
--- a/Marlin/src/pins/pins_DUE3DOM_MINI.h
+++ b/Marlin/src/pins/pins_DUE3DOM_MINI.h
@@ -156,5 +156,16 @@
#define BTN_ENC 37
#define BEEPER_PIN -1
+
+ #elif ENABLED(MINIPANEL)
+ #define BTN_EN1 52
+ #define BTN_EN2 50
+ #define BTN_ENC 48
+ #define LCD_SDSS 4
+ #define SD_DETECT_PIN 14
+ #define BEEPER_PIN 41
+ #define DOGLCD_A0 46
+ #define DOGLCD_CS 45
+
#endif // SPARK_FULL_GRAPHICS
#endif // ULTRA_LCD
diff --git a/Marlin/src/pins/pins_RAMPS_FD_V1.h b/Marlin/src/pins/pins_RAMPS_FD_V1.h
index 0a632cfb31..d5483f4ad2 100644
--- a/Marlin/src/pins/pins_RAMPS_FD_V1.h
+++ b/Marlin/src/pins/pins_RAMPS_FD_V1.h
@@ -125,7 +125,7 @@
#define HEATER_0_PIN 9
#define HEATER_1_PIN 10
#define HEATER_2_PIN 11
-#define HEATER_BED_PIN 8 // BED
+#define HEATER_BED_PIN 8
#define FAN_PIN 12
#define CONTROLLER_FAN_PIN -1
@@ -140,23 +140,58 @@
// LCD / Controller
//
#if ENABLED(ULTRA_LCD)
+ // ramps-fd lcd adaptor
+
+
+ #define BEEPER_PIN 37
+ #define BTN_EN1 33
+ #define BTN_EN2 31
+ #define BTN_ENC 35
+ #define SD_DETECT_PIN 49
+
+
#if ENABLED(NEWPANEL)
- // ramps-fd lcd adaptor
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
+ #endif
+
+ #if ENABLED(MINIPANEL)
+ #define DOGLCD_CS 25
+ #define DOGLCD_A0 27
+ #endif
+#endif // ULTRA_LCD
- #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
- #define BEEPER_PIN 37
-
- #define BTN_EN1 33
- #define BTN_EN2 31
- #define BTN_ENC 35
+#if ENABLED(HAVE_TMC2208)
+ /**
+ * TMC2208 stepper drivers
+ *
+ * Hardware serial communication ports.
+ * If undefined software serial is used according to the pins below
+ */
+ //#define X_HARDWARE_SERIAL Serial1
+ //#define X2_HARDWARE_SERIAL Serial1
+ //#define Y_HARDWARE_SERIAL Serial1
+ //#define Y2_HARDWARE_SERIAL Serial1
+ //#define Z_HARDWARE_SERIAL Serial1
+ //#define Z2_HARDWARE_SERIAL Serial1
+ //#define E0_HARDWARE_SERIAL Serial1
+ //#define E1_HARDWARE_SERIAL Serial1
+ //#define E2_HARDWARE_SERIAL Serial1
+ //#define E3_HARDWARE_SERIAL Serial1
+ //#define E4_HARDWARE_SERIAL Serial1
+#endif
- #define SD_DETECT_PIN 49
- #endif
+//
+// M3/M4/M5 - Spindle/Laser Control
+//
+#if ENABLED(SPINDLE_LASER_ENABLE) && !PIN_EXISTS(SPINDLE_LASER_ENABLE)
+ #if HOTENDS < 3
+ #define SPINDLE_LASER_ENABLE_PIN 45 // Use E2 ENA
+ #define SPINDLE_LASER_PWM_PIN 12 // MUST BE HARDWARE PWM
+ #define SPINDLE_DIR_PIN 47 // Use E2 DIR
#endif
-#endif // ULTRA_LCD
+#endif
diff --git a/Marlin/src/pins/pins_RAMPS_FD_V2.h b/Marlin/src/pins/pins_RAMPS_FD_V2.h
index 2d2375f060..f33546e637 100644
--- a/Marlin/src/pins/pins_RAMPS_FD_V2.h
+++ b/Marlin/src/pins/pins_RAMPS_FD_V2.h
@@ -36,3 +36,11 @@
#undef INVERTED_FAN_PINS
#define I2C_EEPROM
+
+#ifndef PS_ON_PIN
+ #define PS_ON_PIN 12
+#endif
+
+#ifndef FILWIDTH_PIN
+ #define FILWIDTH_PIN 5 // Analog Input on AUX2
+#endif