@ -20,13 +20,6 @@
*
*/
/**
* Sample configuration file for Vellemann K8200
* tested on K8200 with VM8201 ( Display )
* and Arduino 1.6 .8 ( Mac ) by @ CONSULitAS , 2016 - 02 - 21
* https : //github.com/CONSULitAS/Marlin-K8200/archive/K8200_stable_2016-02-21.zip
*/
/**
* Configuration . h
*
@ -58,6 +51,22 @@
*/
# define CONFIGURATION_H_VERSION 010100
/**
* Sample configuration file for Vellemann K8200
* tested on K8200 with VM8201 ( Display )
* and Arduino 1.6 .12 ( Mac OS X ) by @ CONSULitAS , 2016 - 11 - 18
* https : //github.com/CONSULitAS/Marlin-K8200/archive/K8200_stable_2016-11-18.zip
*
* Please choose your hardware options for the K8200 :
*/
// VM8201 Display unit
# define K8200_VM8201
// K8204 Z axis upgrade rod and coupler -> TODO
// #define K8200_K8204
// K8203 direct drive extruder -> TODO
// #define K8200_K8203
//===========================================================================
//============================= Getting Started =============================
//===========================================================================
@ -146,7 +155,11 @@
// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
# define MACHINE_UUID "2b7dea3b-844e-4ab1-aa96-bb6406607d6e" // K8200 standard config with VM8201 (Display)
# if ENABLED(K8200_VM8201)
# define MACHINE_UUID "2b7dea3b-844e-4ab1-aa96-bb6406607d6e" // K8200 standard config with VM8201 (Display)
# else
# define MACHINE_UUID "92f72de1-c211-452e-9f2b-61ef88a4751e" // K8200 standard config without VM8201 (Display)
# endif
// This defines the number of extruders
// :[1, 2, 3, 4]
@ -194,7 +207,7 @@
*
* : { 0 : ' No power switch ' , 1 : ' ATX ' , 2 : ' X - Box 360 ' }
*/
# define POWER_SUPPLY 1
# define POWER_SUPPLY 0
# if POWER_SUPPLY > 0
// Enable this option to leave the PSU off at startup.
@ -274,7 +287,7 @@
# define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early.
// Bed temperature must be close to target for this long before M190 returns success
# define TEMP_BED_RESIDENCY_TIME 0 // (seconds)
# define TEMP_BED_RESIDENCY_TIME 1 0 // (seconds)
# define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one
# define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early.
@ -378,11 +391,11 @@
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
// Vellemann K8200 PCB heatbed with standard PCU at 60 degreesC - calculated with PID Autotune and tested
// from pidautotune
# define DEFAULT_bedKp 341.88
# define DEFAULT_bedKi 25.32
# define DEFAULT_bedKd 1153.89
// Vellemann K8200 PCB heatbed with standard PCU at 60 degreesC - calculated with PID Autotune and tested
// from pidautotune
# define DEFAULT_bedKp 341.88
# define DEFAULT_bedKi 25.32
# define DEFAULT_bedKd 1153.89
# endif // PIDTEMPBED
// @section extruder
@ -466,9 +479,9 @@
# define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
# define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
# define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
# define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
# define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
# define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
# define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
# define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
# define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
# define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
// Enable this feature if all enabled endstop pins are interrupt-capable.
@ -492,13 +505,12 @@
* Default Axis Steps Per Unit ( steps / mm )
* Override with M92
*/
# define DEFAULT_AXIS_STEPS_PER_UNIT { 64.25, 64.25, 2560, 600 } // default steps per unit for K8200
# define DEFAULT_AXIS_STEPS_PER_UNIT { 64.25, 64.25, 2560, 600} // for K8200
/**
* Default Max Feed Rate ( mm / s )
* Override with M203
*/
# define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 500 }
# define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 2 5 }
/**
* Default Max Acceleration ( change / s ) change = mm / s
@ -583,9 +595,9 @@
// | |
// O-- FRONT --+
// (0,0)
# define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle]
# define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle]
# define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle]
# define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
# define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]
# define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle]
// X and Y axis travel speed (mm/m) between probes
# define XY_PROBE_SPEED 8000
@ -660,7 +672,7 @@
* Example : ` M851 Z - 5 ` with a CLEARANCE of 4 = > 9 mm from bed to nozzle .
* But : ` M851 Z + 1 ` with a CLEARANCE of 2 = > 2 mm from bed to nozzle .
*/
# define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow
# define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
# define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
//
@ -680,7 +692,7 @@
// WARNING: When motors turn off there is a chance of losing position accuracy!
# define DISABLE_X false
# define DISABLE_Y false
# define DISABLE_Z false // not for K8200 -> looses Steps
# define DISABLE_Z false
// Warn on display about possibly reduced accuracy
//#define DISABLE_REDUCED_ACCURACY_WARNING
@ -693,7 +705,7 @@
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
# define INVERT_X_DIR false
# define INVERT_Y_DIR false // was true -> why for K8200?
# define INVERT_Y_DIR false // K8200: false
# define INVERT_Z_DIR false
// @section extruder
@ -705,9 +717,9 @@
# define INVERT_E3_DIR true
// @section homing
//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
// Be sure you have this distance over your Z_MAX_POS in case.
// K8200: it is usual to have clamps for the glass plate on the heatbed
# define Z_HOMING_HEIGHT 4
// Be sure you have this distance over your Z_MAX_POS in case.
// ENDSTOP SETTINGS:
// Sets direction of endstops when homing; 1=MAX, -1=MIN
@ -883,7 +895,7 @@
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable EEPROM support
# define EEPROM_SETTINGS
# define EEPROM_SETTINGS // K8200: uses EEPROM by default
# if ENABLED(EEPROM_SETTINGS)
// To disable EEPROM Serial responses and decrease program space by ~1700 byte: comment this out:
@ -917,12 +929,12 @@
// @section temperature
// Preheat Constants
# define PREHEAT_1_TEMP_HOTEND 19 0
# define PREHEAT_1_TEMP_BED 50 // K8200: set back to 70 if you have an upgraded heatbed power supply
# define PREHEAT_1_TEMP_HOTEND 18 0
# define PREHEAT_1_TEMP_BED 50 // K8200: PLA / set back to 70 if you have an upgraded heatbed power supply
# define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
# define PREHEAT_2_TEMP_HOTEND 240
# define PREHEAT_2_TEMP_BED 60 // K8200: set back to 110 if you have an upgraded heatbed power supply
# define PREHEAT_2_TEMP_BED 60 // K8200: ABS / set back to 110 if you have an upgraded heatbed power supply
# define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
//
@ -1024,7 +1036,7 @@
// - Total time printing
//
// This information can be viewed by the M78 command.
//#define PRINTCOUNTER
# define PRINTCOUNTER
//=============================================================================
//============================= LCD and SD support ============================
@ -1032,6 +1044,9 @@
// @section lcd
// K8200: for Display VM8201 with SD slot
# if ENABLED(K8200_VM8201)
//
// LCD LANGUAGE
//
@ -1066,7 +1081,7 @@
//
// :['JAPANESE', 'WESTERN', 'CYRILLIC']
//
# define DISPLAY_CHARSET_HD44780 JAPANESE // K8200: for Display VM8201
# define DISPLAY_CHARSET_HD44780 JAPANESE // K8200: for Display VM8201 // this is the most common hardware
//
// LCD TYPE
@ -1104,7 +1119,7 @@
//
// Use CRC checks and retries on the SD communication.
//
//#define SD_CHECK_AND_RETRY
# define SD_CHECK_AND_RETRY
//
// ENCODER SETTINGS
@ -1112,13 +1127,13 @@
// This option overrides the default number of encoder pulses needed to
// produce one step. Should be increased for high-resolution encoders.
//
//#define ENCODER_PULSES_PER_STEP 1
# define ENCODER_PULSES_PER_STEP 4 // K8200_VM8201: four steps per encoder step
//
// Use this option to override the number of step signals required to
// move between next/prev menu items.
//
//#define ENCODER_STEPS_PER_MENU_ITEM 5
# define ENCODER_STEPS_PER_MENU_ITEM 1 // K8200_VM8201: One step per menu item
/**
* Encoder Direction Options
@ -1143,14 +1158,14 @@
// If CLOCKWISE normally moves DOWN this makes it go UP.
// If CLOCKWISE normally moves UP this makes it go DOWN.
//
//#define REVERSE_MENU_DIRECTION
# define REVERSE_MENU_DIRECTION // K8200: for Display VM8201 encoder on right side
//
// Individual Axis Homing
//
// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu.
//
//#define INDIVIDUAL_AXIS_HOMING_MENU
# define INDIVIDUAL_AXIS_HOMING_MENU
//
// SPEAKER/BUZZER
@ -1180,7 +1195,7 @@
//
// ULTIMAKER Controller.
//
//#define ULTIMAKERCONTROLLER
# define ULTIMAKERCONTROLLER // K8200: for Display VM8201
//
// ULTIPANEL as seen on Thingiverse.
@ -1338,6 +1353,8 @@
//
//#define SAV_3DLCD
# endif // K8200_VM8201
//=============================================================================
//=============================== Extra Features ==============================
//=============================================================================
Scott Lahteine
8 years ago
GitHub