chzj333
5 years ago
committed by
Scott Lahteine
Scott Lahteine
6 changed files with 358 additions and 11 deletions
@ -0,0 +1,254 @@ |
|||
/**
|
|||
* Marlin 3D Printer Firmware |
|||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|||
* |
|||
* Based on Sprinter and grbl. |
|||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm |
|||
* |
|||
* This program is free software: you can redistribute it and/or modify |
|||
* it under the terms of the GNU General Public License as published by |
|||
* the Free Software Foundation, either version 3 of the License, or |
|||
* (at your option) any later version. |
|||
* |
|||
* This program is distributed in the hope that it will be useful, |
|||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
|||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
|||
* GNU General Public License for more details. |
|||
* |
|||
* You should have received a copy of the GNU General Public License |
|||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
* |
|||
*/ |
|||
#pragma once |
|||
|
|||
#ifndef TARGET_STM32F4 |
|||
#error "Oops! Select an STM32F4 board in 'Tools > Board.'" |
|||
#elif HOTENDS > 3 || E_STEPPERS > 3 |
|||
#error "BIGTREE SKR Pro V1.1 supports up to 3 hotends / E-steppers." |
|||
#endif |
|||
|
|||
#define BOARD_NAME "BIGTREE Btt002 1.0" |
|||
|
|||
#define SRAM_EEPROM_EMULATION |
|||
|
|||
// Ignore temp readings during development.
|
|||
//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000
|
|||
|
|||
//
|
|||
// Servos
|
|||
//
|
|||
#define SERVO0_PIN PC3 |
|||
|
|||
//
|
|||
// Limit Switches
|
|||
//
|
|||
#define X_MIN_PIN PD3 |
|||
#define X_MAX_PIN PD3 |
|||
#define Y_MIN_PIN PD2 |
|||
#define Y_MAX_PIN PD2 |
|||
#define Z_MIN_PIN PD1 |
|||
#define Z_MAX_PIN PD1 |
|||
|
|||
//
|
|||
// Z Probe must be this pins ##
|
|||
//
|
|||
#ifndef Z_MIN_PROBE_PIN |
|||
#define Z_MIN_PROBE_PIN PD1 |
|||
#endif |
|||
|
|||
//
|
|||
// Steppers
|
|||
//
|
|||
#define X_STEP_PIN PA9 |
|||
#define X_DIR_PIN PA10 |
|||
#define X_ENABLE_PIN PA8 |
|||
#ifndef X_CS_PIN |
|||
#define X_CS_PIN PE2 |
|||
#endif |
|||
|
|||
#define Y_STEP_PIN PC8 |
|||
#define Y_DIR_PIN PC9 |
|||
#define Y_ENABLE_PIN PC7 |
|||
#ifndef Y_CS_PIN |
|||
#define Y_CS_PIN PE3 |
|||
#endif |
|||
|
|||
#define Z_STEP_PIN PD15 |
|||
#define Z_DIR_PIN PC6 |
|||
#define Z_ENABLE_PIN PD14 |
|||
#ifndef Z_CS_PIN |
|||
#define Z_CS_PIN PE4 |
|||
#endif |
|||
|
|||
#define E0_STEP_PIN PD12 |
|||
#define E0_DIR_PIN PD13 |
|||
#define E0_ENABLE_PIN PD11 |
|||
#ifndef E0_CS_PIN |
|||
#define E0_CS_PIN PD7 |
|||
#endif |
|||
|
|||
/*
|
|||
//SKR_PRO_V1.1
|
|||
#define E1_STEP_PIN PD15 |
|||
#define E1_DIR_PIN PE7 |
|||
#define E1_ENABLE_PIN PA3 |
|||
#ifndef E1_CS_PIN |
|||
#define E1_CS_PIN PG15 |
|||
#endif |
|||
|
|||
#define E2_STEP_PIN PD13 |
|||
#define E2_DIR_PIN PG9 |
|||
#define E2_ENABLE_PIN PF0 |
|||
#ifndef E2_CS_PIN |
|||
#define E2_CS_PIN PG12 |
|||
#endif |
|||
*/ |
|||
//
|
|||
// Software SPI pins for TMC2130 stepper drivers
|
|||
//
|
|||
#if ENABLED(TMC_USE_SW_SPI) |
|||
#ifndef TMC_SW_MOSI |
|||
#define TMC_SW_MOSI PB15 |
|||
#endif |
|||
#ifndef TMC_SW_MISO |
|||
#define TMC_SW_MISO PB14 |
|||
#endif |
|||
#ifndef TMC_SW_SCK |
|||
#define TMC_SW_SCK PB13 |
|||
#endif |
|||
#endif |
|||
|
|||
#if HAS_TMC220x |
|||
/**
|
|||
* TMC2208/TMC2209 stepper drivers |
|||
* |
|||
* Hardware serial communication ports. |
|||
* If undefined software serial is used according to the pins below |
|||
*/ |
|||
//#define X_HARDWARE_SERIAL Serial1
|
|||
//#define X2_HARDWARE_SERIAL Serial1
|
|||
//#define Y_HARDWARE_SERIAL Serial1
|
|||
//#define Y2_HARDWARE_SERIAL Serial1
|
|||
//#define Z_HARDWARE_SERIAL Serial1
|
|||
//#define Z2_HARDWARE_SERIAL Serial1
|
|||
//#define E0_HARDWARE_SERIAL Serial1
|
|||
//#define E1_HARDWARE_SERIAL Serial1
|
|||
//#define E2_HARDWARE_SERIAL Serial1
|
|||
//#define E3_HARDWARE_SERIAL Serial1
|
|||
//#define E4_HARDWARE_SERIAL Serial1
|
|||
|
|||
//
|
|||
// Software serial ##
|
|||
//
|
|||
#define X_SERIAL_TX_PIN PE2 |
|||
#define X_SERIAL_RX_PIN PE2 |
|||
|
|||
#define Y_SERIAL_TX_PIN PE3 |
|||
#define Y_SERIAL_RX_PIN PE3 |
|||
|
|||
#define Z_SERIAL_TX_PIN PE4 |
|||
#define Z_SERIAL_RX_PIN PE4 |
|||
|
|||
#define E0_SERIAL_TX_PIN PD7 |
|||
#define E0_SERIAL_RX_PIN PD7 |
|||
|
|||
//#define E1_SERIAL_TX_PIN PD1
|
|||
//#define E1_SERIAL_RX_PIN PD1
|
|||
|
|||
//#define E2_SERIAL_TX_PIN PD6
|
|||
//#define E2_SERIAL_RX_PIN PD6
|
|||
#endif |
|||
|
|||
//
|
|||
// Temperature Sensors
|
|||
//
|
|||
#define TEMP_0_PIN PA2 // T1 <-> E0
|
|||
#define TEMP_1_PIN PA0 // T2 <-> E1
|
|||
//#define TEMP_2_PIN PC2 // T3 <-> E2 SKR_PRO
|
|||
#define TEMP_BED_PIN PA1 // T0 <-> Bed
|
|||
|
|||
//
|
|||
// Heaters / Fans
|
|||
//
|
|||
#define HEATER_0_PIN PE6 // Heater0
|
|||
//#define HEATER_1_PIN PD14 // Heater1
|
|||
//#define HEATER_2_PIN PB0 // Heater1
|
|||
#define HEATER_BED_PIN PE5 // Hotbed
|
|||
#define FAN_PIN PB9 // Fan0
|
|||
#define FAN1_PIN PB8 // Fan1
|
|||
//#define FAN2_PIN PE6 // Fan2
|
|||
|
|||
// HAL SPI pins group
|
|||
#define SCK_PIN PA5 // SPI SCLK
|
|||
#define MYSSEL PA4 // SPI SSEL
|
|||
#define MISO_PIN PA6 // SPI MISO
|
|||
#define MOSI_PIN PA7 // SPI MOSI
|
|||
|
|||
//
|
|||
// Misc. Functions
|
|||
//
|
|||
#define SDSS PA4 |
|||
|
|||
/**
|
|||
* -------------------------------------SKR_MK3----------------------------------------------- |
|||
* _____ _____ | |
|||
* PA3 | · · | GND 5V | · · | GND | |
|||
* NRESET | · · | PC4(SD_DET) (LCD_D7) PE13 | · · | PE12 (LCD_D6) | |
|||
* (MOSI)PA7 | · · | PB0(BTN_EN2) (LCD_D5) PE11 | · · | PE10 (LCD_D4) | |
|||
* (SD_SS)PA4 | · · | PC5(BTN_EN1) (LCD_RS) PE8 | · · | PE9 (LCD_EN) | |
|||
* (SCK)PA5 | · · | PA6(MISO) (BTN_ENC) PB1 | · · | PE7 (BEEPER) | |
|||
* ￣￣ ￣￣ | |
|||
* EXP2 EXP1 | |
|||
* --------------------------------------------------------------------------------------------- |
|||
*/ |
|||
//
|
|||
// LCDs and Controllers
|
|||
//
|
|||
#if HAS_SPI_LCD |
|||
#define BEEPER_PIN PE7 |
|||
#define BTN_ENC PB1 |
|||
|
|||
#if ENABLED(CR10_STOCKDISPLAY) |
|||
#define LCD_PINS_RS PE12 |
|||
|
|||
#define BTN_EN1 PE9 |
|||
#define BTN_EN2 PE10 |
|||
|
|||
#define LCD_PINS_ENABLE PE13 |
|||
#define LCD_PINS_D4 PE11 |
|||
|
|||
#else |
|||
|
|||
#define LCD_PINS_RS PE8 |
|||
|
|||
#define BTN_EN1 PC5 |
|||
#define BTN_EN2 PB0 |
|||
#define SD_DETECT_PIN PC4 |
|||
|
|||
#define LCD_SDSS PA4 |
|||
|
|||
#define LCD_PINS_ENABLE PE9 |
|||
#define LCD_PINS_D4 PE10 |
|||
|
|||
#if ENABLED(ULTIPANEL) |
|||
#define LCD_PINS_D5 PE11 |
|||
#define LCD_PINS_D6 PE12 |
|||
#define LCD_PINS_D7 PE13 |
|||
#endif |
|||
|
|||
#endif |
|||
|
|||
// Alter timing for graphical display
|
|||
#if HAS_GRAPHICAL_LCD |
|||
#ifndef ST7920_DELAY_1 |
|||
#define ST7920_DELAY_1 DELAY_NS(96) |
|||
#endif |
|||
#ifndef ST7920_DELAY_2 |
|||
#define ST7920_DELAY_2 DELAY_NS(48) |
|||
#endif |
|||
#ifndef ST7920_DELAY_3 |
|||
#define ST7920_DELAY_3 DELAY_NS(600) |
|||
#endif |
|||
#endif |
|||
|
|||
#endif // HAS_SPI_LCD
|
|||
@ -0,0 +1,65 @@ |
|||
{ |
|||
"build": { |
|||
"core": "stm32", |
|||
"cpu": "cortex-m4", |
|||
"extra_flags": "-DSTM32F407xx", |
|||
"f_cpu": "168000000L", |
|||
"hwids": [ |
|||
[ |
|||
"0x1EAF", |
|||
"0x0003" |
|||
], |
|||
[ |
|||
"0x0483", |
|||
"0x3748" |
|||
] |
|||
], |
|||
"ldscript": "stm32f407xg.ld", |
|||
"mcu": "stm32f407vet6", |
|||
"variant": "BIGTREE_GENERIC_STM32F407_5X" |
|||
}, |
|||
"debug": { |
|||
"jlink_device": "STM32F407VE", |
|||
"openocd_target": "stm32f4x", |
|||
"svd_path": "STM32F40x.svd", |
|||
"tools": { |
|||
"stlink": { |
|||
"server": { |
|||
"arguments": [ |
|||
"-f", |
|||
"scripts/interface/stlink.cfg", |
|||
"-c", |
|||
"transport select hla_swd", |
|||
"-f", |
|||
"scripts/target/stm32f4x.cfg", |
|||
"-c", |
|||
"reset_config none" |
|||
], |
|||
"executable": "bin/openocd", |
|||
"package": "tool-openocd" |
|||
} |
|||
} |
|||
} |
|||
}, |
|||
"frameworks": [ |
|||
"arduino", |
|||
"stm32cube" |
|||
], |
|||
"name": "STM32F407VE (64k RAM. 512k Flash)", |
|||
"upload": { |
|||
"disable_flushing": false, |
|||
"maximum_ram_size": 65536, |
|||
"maximum_size": 524288, |
|||
"protocol": "stlink", |
|||
"protocols": [ |
|||
"stlink", |
|||
"dfu", |
|||
"jlink" |
|||
], |
|||
"require_upload_port": true, |
|||
"use_1200bps_touch": false, |
|||
"wait_for_upload_port": false |
|||
}, |
|||
"url": "http://www.st.com/en/microcontrollers/stm32f407zg.html", |
|||
"vendor": "Generic" |
|||
} |
|||
Loading…
Reference in new issue