More info on E3D, Keenovo, and Wanhao thermistors (#17561)

Marlin/Configuration.h

@@ -364,7 +364,7 @@
  *   202 : 200k thermistor - Copymaster 3D
  *     3 : Mendel-parts thermistor (4.7k pullup)
  *     4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
- *     5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup)
+ *     5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
  *   501 : 100K Zonestar (Tronxy X3A) Thermistor
  *   512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
  *     6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
@@ -373,7 +373,7 @@
  *     8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
  *     9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
  *    10 : 100k RS thermistor 198-961 (4.7k pullup)
- *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
+ *    11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
  *    15 : 100k thermistor calibration for JGAurora A5 hotend
@@ -395,7 +395,7 @@
  *    52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
  *    55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
  *
- *  1047 : Pt1000 with 4k7 pullup
+ *  1047 : Pt1000 with 4k7 pullup (E3D)
  *  1010 : Pt1000 with 1k pullup (non standard)
  *   147 : Pt100 with 4k7 pullup
  *   110 : Pt100 with 1k pullup (non standard)