From b2cf253a13ba36baa681032e4e02639d23ff3774 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Fri, 23 Feb 2018 12:41:00 -0600 Subject: [PATCH 1/2] Add RESTORE_LEVELING_AFTER_G28 option --- .travis.yml | 4 ++-- Marlin/Configuration.h | 6 ++++++ Marlin/src/config/default/Configuration.h | 6 ++++++ Marlin/src/gcode/calibrate/G28.cpp | 8 ++++---- Marlin/src/inc/SanityCheck.h | 2 ++ 5 files changed, 20 insertions(+), 6 deletions(-) diff --git a/.travis.yml b/.travis.yml index 2048b649f1..a6348d9e4f 100644 --- a/.travis.yml +++ b/.travis.yml @@ -83,7 +83,7 @@ script: - opt_set TEMP_SENSOR_3 20 - opt_set TEMP_SENSOR_4 999 - opt_set TEMP_SENSOR_BED 1 - - opt_enable AUTO_BED_LEVELING_UBL DEBUG_LEVELING_FEATURE G26_MESH_EDITING ENABLE_LEVELING_FADE_HEIGHT EEPROM_SETTINGS EEPROM_CHITCHAT G3D_PANEL SKEW_CORRECTION + - opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_EDITING ENABLE_LEVELING_FADE_HEIGHT EEPROM_SETTINGS EEPROM_CHITCHAT G3D_PANEL SKEW_CORRECTION - opt_enable_adv CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING BABYSTEP_XY LIN_ADVANCE NANODLP_Z_SYNC QUICK_HOME - build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM} # @@ -299,7 +299,7 @@ script: # - use_example_configs delta/generic - opt_disable DISABLE_MIN_ENDSTOPS - - opt_enable AUTO_BED_LEVELING_UBL Z_PROBE_ALLEN_KEY EEPROM_SETTINGS EEPROM_CHITCHAT OLED_PANEL_TINYBOY2 MESH_EDIT_GFX_OVERLAY + - opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 Z_PROBE_ALLEN_KEY EEPROM_SETTINGS EEPROM_CHITCHAT OLED_PANEL_TINYBOY2 MESH_EDIT_GFX_OVERLAY - build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM} # # Delta Config (FLSUN AC because it's complex) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index f6db659878..02f2adb7b4 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -912,6 +912,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/default/Configuration.h b/Marlin/src/config/default/Configuration.h index a845122512..50b13189e8 100644 --- a/Marlin/src/config/default/Configuration.h +++ b/Marlin/src/config/default/Configuration.h @@ -912,6 +912,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/gcode/calibrate/G28.cpp b/Marlin/src/gcode/calibrate/G28.cpp index 5bc414b4ec..3ab978dc84 100644 --- a/Marlin/src/gcode/calibrate/G28.cpp +++ b/Marlin/src/gcode/calibrate/G28.cpp @@ -183,8 +183,8 @@ void GcodeSuite::G28(const bool always_home_all) { // Disable the leveling matrix before homing #if HAS_LEVELING - #if ENABLED(AUTO_BED_LEVELING_UBL) - const bool ubl_state_at_entry = planner.leveling_active; + #if ENABLED(RESTORE_LEVELING_AFTER_G28) + const bool leveling_state_at_entry = planner.leveling_active; #endif set_bed_leveling_enabled(false); #endif @@ -319,8 +319,8 @@ void GcodeSuite::G28(const bool always_home_all) { do_blocking_move_to_z(delta_clip_start_height); #endif - #if ENABLED(AUTO_BED_LEVELING_UBL) - set_bed_leveling_enabled(ubl_state_at_entry); + #if ENABLED(RESTORE_LEVELING_AFTER_G28) + set_bed_leveling_enabled(leveling_state_at_entry); #endif clean_up_after_endstop_or_probe_move(); diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index e0f7effff5..85d4d16158 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -834,6 +834,8 @@ static_assert(1 >= 0 #error "AUTO_BED_LEVELING_UBL requires EEPROM_SETTINGS. Please update your configuration." #elif !WITHIN(GRID_MAX_POINTS_X, 3, 15) || !WITHIN(GRID_MAX_POINTS_Y, 3, 15) #error "GRID_MAX_POINTS_[XY] must be a whole number between 3 and 15." + #elif DISABLED(RESTORE_LEVELING_AFTER_G28) + #error "AUTO_BED_LEVELING_UBL (<=1.1.8) always has RESTORE_LEVELING_AFTER_G28 enabled. To keep this behavior, #define RESTORE_LEVELING_AFTER_G28. To keep it disabled comment out this line in SanityCheck.h." #else static_assert(WITHIN(UBL_PROBE_PT_1_X, MIN_PROBE_X, MAX_PROBE_X), "UBL_PROBE_PT_1_X can't be reached by the Z probe."); static_assert(WITHIN(UBL_PROBE_PT_2_X, MIN_PROBE_X, MAX_PROBE_X), "UBL_PROBE_PT_2_X can't be reached by the Z probe."); From 17d984eab32d684fcd99544e59ba440527be9711 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Fri, 23 Feb 2018 12:41:12 -0600 Subject: [PATCH 2/2] Add RESTORE_LEVELING_AFTER_G28 to example configs --- .../src/config/examples/AlephObjects/TAZ4/Configuration.h | 6 ++++++ .../src/config/examples/AliExpress/CL-260/Configuration.h | 6 ++++++ Marlin/src/config/examples/Anet/A6/Configuration.h | 6 ++++++ Marlin/src/config/examples/Anet/A8/Configuration.h | 6 ++++++ Marlin/src/config/examples/Azteeg/X5GT/Configuration.h | 6 ++++++ .../src/config/examples/BIBO/TouchX/cyclops/Configuration.h | 6 ++++++ .../src/config/examples/BIBO/TouchX/default/Configuration.h | 6 ++++++ Marlin/src/config/examples/BQ/Hephestos/Configuration.h | 6 ++++++ Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h | 6 ++++++ Marlin/src/config/examples/BQ/WITBOX/Configuration.h | 6 ++++++ Marlin/src/config/examples/Cartesio/Configuration.h | 6 ++++++ Marlin/src/config/examples/Creality/CR-10/Configuration.h | 6 ++++++ Marlin/src/config/examples/Creality/CR-10S/Configuration.h | 6 ++++++ .../src/config/examples/Creality/CR-10mini/Configuration.h | 6 ++++++ Marlin/src/config/examples/Creality/Ender/Configuration.h | 6 ++++++ Marlin/src/config/examples/Felix/Configuration.h | 6 ++++++ Marlin/src/config/examples/Felix/DUAL/Configuration.h | 6 ++++++ .../src/config/examples/FolgerTech/i3-2020/Configuration.h | 6 ++++++ Marlin/src/config/examples/Geeetech/GT2560/Configuration.h | 6 ++++++ .../examples/Geeetech/I3_Pro_X-GT2560/Configuration.h | 6 ++++++ .../Geeetech/Prusa i3 Pro B/bltouch/Configuration.h | 6 ++++++ .../Geeetech/Prusa i3 Pro B/noprobe/Configuration.h | 6 ++++++ Marlin/src/config/examples/Infitary/i3-M508/Configuration.h | 6 ++++++ Marlin/src/config/examples/JGAurora/A5/Configuration.h | 6 ++++++ Marlin/src/config/examples/MakerParts/Configuration.h | 6 ++++++ Marlin/src/config/examples/Malyan/M150/Configuration.h | 6 ++++++ Marlin/src/config/examples/Malyan/M200/Configuration.h | 6 ++++++ .../src/config/examples/Micromake/C1/basic/Configuration.h | 6 ++++++ .../config/examples/Micromake/C1/enhanced/Configuration.h | 6 ++++++ Marlin/src/config/examples/Mks/Sbase/Configuration.h | 6 ++++++ .../config/examples/RepRapWorld/Megatronics/Configuration.h | 6 ++++++ Marlin/src/config/examples/RigidBot/Configuration.h | 6 ++++++ Marlin/src/config/examples/SCARA/Configuration.h | 6 ++++++ Marlin/src/config/examples/STM32F10/Configuration.h | 6 ++++++ Marlin/src/config/examples/Sanguinololu/Configuration.h | 6 ++++++ Marlin/src/config/examples/TheBorg/Configuration.h | 6 ++++++ Marlin/src/config/examples/TinyBoy2/Configuration.h | 6 ++++++ Marlin/src/config/examples/Tronxy/X1/Configuration.h | 6 ++++++ Marlin/src/config/examples/Tronxy/X5S/Configuration.h | 6 ++++++ Marlin/src/config/examples/Tronxy/XY100/Configuration.h | 6 ++++++ .../src/config/examples/UltiMachine/Archim2/Configuration.h | 6 ++++++ Marlin/src/config/examples/Velleman/K8200/Configuration.h | 6 ++++++ Marlin/src/config/examples/Velleman/K8400/Configuration.h | 6 ++++++ .../examples/Velleman/K8400/Dual-head/Configuration.h | 6 ++++++ .../src/config/examples/Wanhao/Duplicator 6/Configuration.h | 6 ++++++ Marlin/src/config/examples/adafruit/ST7565/Configuration.h | 6 ++++++ .../examples/delta/FLSUN/auto_calibrate/Configuration.h | 6 ++++++ .../src/config/examples/delta/FLSUN/kossel/Configuration.h | 6 ++++++ .../config/examples/delta/FLSUN/kossel_mini/Configuration.h | 6 ++++++ .../config/examples/delta/Hatchbox_Alpha/Configuration.h | 6 ++++++ Marlin/src/config/examples/delta/generic/Configuration.h | 6 ++++++ .../src/config/examples/delta/kossel_mini/Configuration.h | 6 ++++++ Marlin/src/config/examples/delta/kossel_pro/Configuration.h | 6 ++++++ Marlin/src/config/examples/delta/kossel_xl/Configuration.h | 6 ++++++ Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h | 6 ++++++ Marlin/src/config/examples/makibox/Configuration.h | 6 ++++++ Marlin/src/config/examples/stm32f103ret6/Configuration.h | 6 ++++++ Marlin/src/config/examples/tvrrug/Round2/Configuration.h | 6 ++++++ Marlin/src/config/examples/wt150/Configuration.h | 6 ++++++ 59 files changed, 354 insertions(+) diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h index 24404c8555..ce7becf047 100644 --- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h +++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h @@ -932,6 +932,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h index 59f42da893..8aacd1fa1a 100644 --- a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h +++ b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h @@ -912,6 +912,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Anet/A6/Configuration.h b/Marlin/src/config/examples/Anet/A6/Configuration.h index 4ac60c6e3f..4653910010 100644 --- a/Marlin/src/config/examples/Anet/A6/Configuration.h +++ b/Marlin/src/config/examples/Anet/A6/Configuration.h @@ -1022,6 +1022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Anet/A8/Configuration.h b/Marlin/src/config/examples/Anet/A8/Configuration.h index f1cead72ab..8cfb91e579 100644 --- a/Marlin/src/config/examples/Anet/A8/Configuration.h +++ b/Marlin/src/config/examples/Anet/A8/Configuration.h @@ -919,6 +919,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h index f0f67de4c1..3e7c40e88f 100644 --- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h +++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h @@ -912,6 +912,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h index aff6919772..0fb4a82286 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -912,6 +912,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h index de92833969..e9198a70da 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h +++ b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h @@ -912,6 +912,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h index 9a86568a68..b4b486d19d 100644 --- a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h +++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h @@ -900,6 +900,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h index 201a04ebe2..dde324069f 100644 --- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h +++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h @@ -898,6 +898,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h index 1a386a8b4b..4b800d8f5c 100644 --- a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h +++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h @@ -900,6 +900,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Cartesio/Configuration.h b/Marlin/src/config/examples/Cartesio/Configuration.h index 58eacfddd4..6589a25033 100644 --- a/Marlin/src/config/examples/Cartesio/Configuration.h +++ b/Marlin/src/config/examples/Cartesio/Configuration.h @@ -911,6 +911,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration.h b/Marlin/src/config/examples/Creality/CR-10/Configuration.h index 3a9834faff..71ea04793a 100755 --- a/Marlin/src/config/examples/Creality/CR-10/Configuration.h +++ b/Marlin/src/config/examples/Creality/CR-10/Configuration.h @@ -922,6 +922,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h index 5b5885370a..c86eaa18eb 100644 --- a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h +++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h @@ -904,6 +904,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h b/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h index 2cb789e80d..cea3412da5 100644 --- a/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h +++ b/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h @@ -931,6 +931,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Creality/Ender/Configuration.h b/Marlin/src/config/examples/Creality/Ender/Configuration.h index 9cda5a5210..7df048085f 100644 --- a/Marlin/src/config/examples/Creality/Ender/Configuration.h +++ b/Marlin/src/config/examples/Creality/Ender/Configuration.h @@ -907,6 +907,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Felix/Configuration.h b/Marlin/src/config/examples/Felix/Configuration.h index b46051d343..ce1494e84d 100644 --- a/Marlin/src/config/examples/Felix/Configuration.h +++ b/Marlin/src/config/examples/Felix/Configuration.h @@ -894,6 +894,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Felix/DUAL/Configuration.h b/Marlin/src/config/examples/Felix/DUAL/Configuration.h index 4434d5b09d..295459fcc5 100644 --- a/Marlin/src/config/examples/Felix/DUAL/Configuration.h +++ b/Marlin/src/config/examples/Felix/DUAL/Configuration.h @@ -894,6 +894,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h index 9065551290..36af811cf7 100644 --- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h @@ -918,6 +918,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h index f9fc66e2d3..100da5e4ba 100644 --- a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h @@ -927,6 +927,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index aa3e1608f7..929ea47c1f 100644 --- a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -912,6 +912,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index d9521fe21c..3e8389802f 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -919,6 +919,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index 49065f85b0..a0af8ee708 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -918,6 +918,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h index 9ad2cefbbd..35187d90ac 100644 --- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h +++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h @@ -916,6 +916,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration.h b/Marlin/src/config/examples/JGAurora/A5/Configuration.h index 1abc4f83b1..e3d0b66654 100644 --- a/Marlin/src/config/examples/JGAurora/A5/Configuration.h +++ b/Marlin/src/config/examples/JGAurora/A5/Configuration.h @@ -924,6 +924,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/MakerParts/Configuration.h b/Marlin/src/config/examples/MakerParts/Configuration.h index 4887deace9..8effde2169 100644 --- a/Marlin/src/config/examples/MakerParts/Configuration.h +++ b/Marlin/src/config/examples/MakerParts/Configuration.h @@ -932,6 +932,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration.h b/Marlin/src/config/examples/Malyan/M150/Configuration.h index b85ecbea10..692eb1a82d 100644 --- a/Marlin/src/config/examples/Malyan/M150/Configuration.h +++ b/Marlin/src/config/examples/Malyan/M150/Configuration.h @@ -940,6 +940,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration.h b/Marlin/src/config/examples/Malyan/M200/Configuration.h index b676c2b1a7..f84d120aad 100644 --- a/Marlin/src/config/examples/Malyan/M200/Configuration.h +++ b/Marlin/src/config/examples/Malyan/M200/Configuration.h @@ -911,6 +911,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h index de59235b22..c3de82d3e5 100644 --- a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h +++ b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h @@ -916,6 +916,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h index 452b42ea7d..1aa1c6f0ba 100644 --- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h @@ -916,6 +916,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration.h b/Marlin/src/config/examples/Mks/Sbase/Configuration.h index ae8ffda0c4..7fd2cf7b51 100644 --- a/Marlin/src/config/examples/Mks/Sbase/Configuration.h +++ b/Marlin/src/config/examples/Mks/Sbase/Configuration.h @@ -912,6 +912,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h index 348f4b82a6..a4d3606033 100644 --- a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -912,6 +912,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/RigidBot/Configuration.h b/Marlin/src/config/examples/RigidBot/Configuration.h index 4111793bc3..e00a92d60f 100644 --- a/Marlin/src/config/examples/RigidBot/Configuration.h +++ b/Marlin/src/config/examples/RigidBot/Configuration.h @@ -910,6 +910,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/SCARA/Configuration.h b/Marlin/src/config/examples/SCARA/Configuration.h index fcc2e7b415..de211ff10e 100644 --- a/Marlin/src/config/examples/SCARA/Configuration.h +++ b/Marlin/src/config/examples/SCARA/Configuration.h @@ -924,6 +924,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/STM32F10/Configuration.h b/Marlin/src/config/examples/STM32F10/Configuration.h index 4617dcee23..85d857797b 100644 --- a/Marlin/src/config/examples/STM32F10/Configuration.h +++ b/Marlin/src/config/examples/STM32F10/Configuration.h @@ -915,6 +915,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration.h b/Marlin/src/config/examples/Sanguinololu/Configuration.h index 538c600749..71e0363f55 100644 --- a/Marlin/src/config/examples/Sanguinololu/Configuration.h +++ b/Marlin/src/config/examples/Sanguinololu/Configuration.h @@ -943,6 +943,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/TheBorg/Configuration.h b/Marlin/src/config/examples/TheBorg/Configuration.h index 833715b1d9..3dbe58b366 100644 --- a/Marlin/src/config/examples/TheBorg/Configuration.h +++ b/Marlin/src/config/examples/TheBorg/Configuration.h @@ -912,6 +912,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration.h b/Marlin/src/config/examples/TinyBoy2/Configuration.h index 77f2437ed2..a0d98b0126 100644 --- a/Marlin/src/config/examples/TinyBoy2/Configuration.h +++ b/Marlin/src/config/examples/TinyBoy2/Configuration.h @@ -968,6 +968,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Tronxy/X1/Configuration.h b/Marlin/src/config/examples/Tronxy/X1/Configuration.h index fe494ae707..6d2466444e 100644 --- a/Marlin/src/config/examples/Tronxy/X1/Configuration.h +++ b/Marlin/src/config/examples/Tronxy/X1/Configuration.h @@ -903,6 +903,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h index 465d717abc..2d8e21bf86 100644 --- a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h +++ b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h @@ -912,6 +912,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h index dee561d480..d305200fd6 100644 --- a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h +++ b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h @@ -923,6 +923,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h index 286baaf570..ca6ed17565 100644 --- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h +++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h @@ -903,6 +903,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration.h b/Marlin/src/config/examples/Velleman/K8200/Configuration.h index 5984775eb5..22e0789861 100644 --- a/Marlin/src/config/examples/Velleman/K8200/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8200/Configuration.h @@ -942,6 +942,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Configuration.h index a6303c8d74..8573366ac8 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8400/Configuration.h @@ -912,6 +912,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h index fb7a34cf5d..341dd1367b 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -912,6 +912,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h index 2c900678f5..abd4c1a2fc 100644 --- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -913,6 +913,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h index 6338967a3d..43bbb54d01 100644 --- a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h +++ b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h @@ -912,6 +912,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index 26ee3f8250..cbc546cff2 100644 --- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -1042,6 +1042,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h index a15e885754..8abc72dc08 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h @@ -1033,6 +1033,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h index 1a9ab7101a..51d0d64edb 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -1042,6 +1042,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h b/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h index 0598a3a4d3..c79d6e8213 100644 --- a/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -1045,6 +1045,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/delta/generic/Configuration.h b/Marlin/src/config/examples/delta/generic/Configuration.h index d10edb2768..5e3de46512 100644 --- a/Marlin/src/config/examples/delta/generic/Configuration.h +++ b/Marlin/src/config/examples/delta/generic/Configuration.h @@ -1029,6 +1029,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h index 537ee791b1..f44de6ee0b 100644 --- a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h @@ -1032,6 +1032,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h index 865505eb53..d429fa0013 100644 --- a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h @@ -1032,6 +1032,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h index dd9ff1c651..a094fdc4ab 100644 --- a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h @@ -1041,6 +1041,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h index ce18c8ab9c..ba34d31538 100644 --- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h @@ -926,6 +926,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/makibox/Configuration.h b/Marlin/src/config/examples/makibox/Configuration.h index c6242369a1..9e9c6596a4 100644 --- a/Marlin/src/config/examples/makibox/Configuration.h +++ b/Marlin/src/config/examples/makibox/Configuration.h @@ -915,6 +915,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/stm32f103ret6/Configuration.h b/Marlin/src/config/examples/stm32f103ret6/Configuration.h index f89b6b002d..3de98375d2 100644 --- a/Marlin/src/config/examples/stm32f103ret6/Configuration.h +++ b/Marlin/src/config/examples/stm32f103ret6/Configuration.h @@ -913,6 +913,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h index ac058e2d28..8c56396532 100644 --- a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h +++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h @@ -907,6 +907,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/wt150/Configuration.h b/Marlin/src/config/examples/wt150/Configuration.h index 7c433eaed1..f63a474ede 100644 --- a/Marlin/src/config/examples/wt150/Configuration.h +++ b/Marlin/src/config/examples/wt150/Configuration.h @@ -917,6 +917,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'.