diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index f9db4f49ba..f2d6d47f2d 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -1409,6 +1409,9 @@ bool get_target_extruder_from_command(const uint16_t code) { soft_endstop_max[axis] = base_max_pos(axis) + offs; } } + #elif ENABLED(DELTA) + soft_endstop_min[axis] = base_min_pos(axis) + (axis == Z_AXIS ? 0 : offs); + soft_endstop_max[axis] = base_max_pos(axis) + offs; #else soft_endstop_min[axis] = base_min_pos(axis) + offs; soft_endstop_max[axis] = base_max_pos(axis) + offs; @@ -1806,13 +1809,9 @@ static void clean_up_after_endstop_or_probe_move() { } #endif - float z_dest = LOGICAL_Z_POSITION(z_raise); + float z_dest = z_raise; if (zprobe_zoffset < 0) z_dest -= zprobe_zoffset; - #if ENABLED(DELTA) - z_dest -= home_offset[Z_AXIS]; // Account for delta height adjustment - #endif - if (z_dest > current_position[Z_AXIS]) do_blocking_move_to_z(z_dest); } @@ -2106,7 +2105,7 @@ static void clean_up_after_endstop_or_probe_move() { safe_delay(BLTOUCH_DELAY); } - void set_bltouch_deployed(const bool deploy) { + bool set_bltouch_deployed(const bool deploy) { if (deploy && TEST_BLTOUCH()) { // If BL-Touch says it's triggered bltouch_command(BLTOUCH_RESET); // try to reset it. bltouch_command(BLTOUCH_DEPLOY); // Also needs to deploy and stow to @@ -2118,6 +2117,7 @@ static void clean_up_after_endstop_or_probe_move() { SERIAL_ERROR_START(); SERIAL_ERRORLNPGM(MSG_STOP_BLTOUCH); stop(); // punt! + return true; } } @@ -2130,6 +2130,8 @@ static void clean_up_after_endstop_or_probe_move() { SERIAL_EOL(); } #endif + + return false; } #endif // BLTOUCH @@ -2149,23 +2151,7 @@ static void clean_up_after_endstop_or_probe_move() { // Make room for probe do_probe_raise(_Z_CLEARANCE_DEPLOY_PROBE); - // When deploying make sure BLTOUCH is not already triggered - #if ENABLED(BLTOUCH) - if (deploy && TEST_BLTOUCH()) { // If BL-Touch says it's triggered - bltouch_command(BLTOUCH_RESET); // try to reset it. - bltouch_command(BLTOUCH_DEPLOY); // Also needs to deploy and stow to - bltouch_command(BLTOUCH_STOW); // clear the triggered condition. - safe_delay(1500); // wait for internal self test to complete - // measured completion time was 0.65 seconds - // after reset, deploy & stow sequence - if (TEST_BLTOUCH()) { // If it still claims to be triggered... - SERIAL_ERROR_START(); - SERIAL_ERRORLNPGM(MSG_STOP_BLTOUCH); - stop(); // punt! - return true; - } - } - #elif ENABLED(Z_PROBE_SLED) || ENABLED(Z_PROBE_ALLEN_KEY) + #if ENABLED(Z_PROBE_SLED) || ENABLED(Z_PROBE_ALLEN_KEY) #if ENABLED(Z_PROBE_SLED) #define _AUE_ARGS true, false, false #else @@ -2236,14 +2222,21 @@ static void clean_up_after_endstop_or_probe_move() { return false; } - static void do_probe_move(float z, float fr_mm_m) { + /** + * @brief Used by run_z_probe to do a single Z probe move. + * + * @param z Z destination + * @param fr_mm_s Feedrate in mm/s + * @return true to indicate an error + */ + static bool do_probe_move(const float z, const float fr_mm_m) { #if ENABLED(DEBUG_LEVELING_FEATURE) if (DEBUGGING(LEVELING)) DEBUG_POS(">>> do_probe_move", current_position); #endif // Deploy BLTouch at the start of any probe #if ENABLED(BLTOUCH) - set_bltouch_deployed(true); + if (set_bltouch_deployed(true)) return true; #endif #if QUIET_PROBING @@ -2251,15 +2244,24 @@ static void clean_up_after_endstop_or_probe_move() { #endif // Move down until probe triggered - do_blocking_move_to_z(LOGICAL_Z_POSITION(z), MMM_TO_MMS(fr_mm_m)); + do_blocking_move_to_z(z, MMM_TO_MMS(fr_mm_m)); + + // Check to see if the probe was triggered + const bool probe_triggered = TEST(Endstops::endstop_hit_bits, + #if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) + Z_MIN + #else + Z_MIN_PROBE + #endif + ); #if QUIET_PROBING probing_pause(false); #endif - // Retract BLTouch immediately after a probe + // Retract BLTouch immediately after a probe if it was triggered #if ENABLED(BLTOUCH) - set_bltouch_deployed(false); + if (probe_triggered && set_bltouch_deployed(false)) return true; #endif // Clear endstop flags @@ -2274,11 +2276,18 @@ static void clean_up_after_endstop_or_probe_move() { #if ENABLED(DEBUG_LEVELING_FEATURE) if (DEBUGGING(LEVELING)) DEBUG_POS("<<< do_probe_move", current_position); #endif + + return !probe_triggered; } - // Do a single Z probe and return with current_position[Z_AXIS] - // at the height where the probe triggered. - static float run_z_probe() { + /** + * @details Used by probe_pt to do a single Z probe. + * Leaves current_position[Z_AXIS] at the height where the probe triggered. + * + * @param short_move Flag for a shorter probe move towards the bed + * @return The raw Z position where the probe was triggered + */ + static float run_z_probe(const bool short_move=true) { #if ENABLED(DEBUG_LEVELING_FEATURE) if (DEBUGGING(LEVELING)) DEBUG_POS(">>> run_z_probe", current_position); @@ -2290,34 +2299,33 @@ static void clean_up_after_endstop_or_probe_move() { #if ENABLED(PROBE_DOUBLE_TOUCH) // Do a first probe at the fast speed - do_probe_move(-(Z_MAX_LENGTH) - 10, Z_PROBE_SPEED_FAST); + if (do_probe_move(-10, Z_PROBE_SPEED_FAST)) return NAN; #if ENABLED(DEBUG_LEVELING_FEATURE) float first_probe_z = current_position[Z_AXIS]; if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("1st Probe Z:", first_probe_z); #endif - // move up by the bump distance - do_blocking_move_to_z(current_position[Z_AXIS] + home_bump_mm(Z_AXIS), MMM_TO_MMS(Z_PROBE_SPEED_FAST)); + // move up to make clearance for the probe + do_blocking_move_to_z(current_position[Z_AXIS] + Z_CLEARANCE_BETWEEN_PROBES, MMM_TO_MMS(Z_PROBE_SPEED_FAST)); #else // If the nozzle is above the travel height then // move down quickly before doing the slow probe - float z = LOGICAL_Z_POSITION(Z_CLEARANCE_BETWEEN_PROBES); + float z = Z_CLEARANCE_DEPLOY_PROBE; if (zprobe_zoffset < 0) z -= zprobe_zoffset; - #if ENABLED(DELTA) - z -= home_offset[Z_AXIS]; // Account for delta height adjustment - #endif - - if (z < current_position[Z_AXIS]) - do_blocking_move_to_z(z, MMM_TO_MMS(Z_PROBE_SPEED_FAST)); + if (z < current_position[Z_AXIS]) { + // If we don't make it to the z position (i.e. the probe triggered), move up to make clearance for the probe + if (!do_probe_move(z, Z_PROBE_SPEED_FAST)) + do_blocking_move_to_z(current_position[Z_AXIS] + Z_CLEARANCE_BETWEEN_PROBES, MMM_TO_MMS(Z_PROBE_SPEED_FAST)); + } #endif // move down slowly to find bed - do_probe_move(-(Z_MAX_LENGTH) - 10, Z_PROBE_SPEED_SLOW); + if (do_probe_move(-10 + (short_move ? 0 : -(Z_MAX_LENGTH)), Z_PROBE_SPEED_SLOW)) return NAN; #if ENABLED(DEBUG_LEVELING_FEATURE) if (DEBUGGING(LEVELING)) DEBUG_POS("<<< run_z_probe", current_position); @@ -2330,6 +2338,7 @@ static void clean_up_after_endstop_or_probe_move() { SERIAL_ECHOLNPAIR(" Discrepancy:", first_probe_z - current_position[Z_AXIS]); } #endif + return RAW_CURRENT_POSITION(Z) + zprobe_zoffset #if ENABLED(DELTA) + home_offset[Z_AXIS] // Account for delta height adjustment @@ -2372,22 +2381,31 @@ static void clean_up_after_endstop_or_probe_move() { do_blocking_move_to_z(delta_clip_start_height); #endif - // Ensure a minimum height before moving the probe - do_probe_raise(Z_CLEARANCE_BETWEEN_PROBES); + #if HAS_SOFTWARE_ENDSTOPS + // Store the status of the soft endstops and disable if we're probing a non-printable location + static bool enable_soft_endstops = soft_endstops_enabled; + if (!printable) soft_endstops_enabled = false; + #endif feedrate_mm_s = XY_PROBE_FEEDRATE_MM_S; // Move the probe to the given XY do_blocking_move_to_xy(nx, ny); - if (DEPLOY_PROBE()) return NAN; + float measured_z = NAN; + if (!DEPLOY_PROBE()) { + measured_z = run_z_probe(printable); - const float measured_z = run_z_probe(); + if (!stow) + do_blocking_move_to_z(current_position[Z_AXIS] + Z_CLEARANCE_BETWEEN_PROBES, MMM_TO_MMS(Z_PROBE_SPEED_FAST)); + else + if (STOW_PROBE()) measured_z = NAN; + } - if (!stow) - do_probe_raise(Z_CLEARANCE_BETWEEN_PROBES); - else - if (STOW_PROBE()) return NAN; + #if HAS_SOFTWARE_ENDSTOPS + // Restore the soft endstop status + soft_endstops_enabled = enable_soft_endstops; + #endif if (verbose_level > 2) { SERIAL_PROTOCOLPGM("Bed X: "); @@ -2405,6 +2423,12 @@ static void clean_up_after_endstop_or_probe_move() { feedrate_mm_s = old_feedrate_mm_s; + if (isnan(measured_z)) { + LCD_MESSAGEPGM(MSG_ERR_PROBING_FAILED); + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM(MSG_ERR_PROBING_FAILED); + } + return measured_z; } @@ -3753,7 +3777,7 @@ inline void gcode_G4() { * A delta can only safely home all axes at the same time * This is like quick_home_xy() but for 3 towers. */ - inline void home_delta() { + inline bool home_delta() { #if ENABLED(DEBUG_LEVELING_FEATURE) if (DEBUGGING(LEVELING)) DEBUG_POS(">>> home_delta", current_position); #endif @@ -3762,10 +3786,21 @@ inline void gcode_G4() { sync_plan_position(); // Move all carriages together linearly until an endstop is hit. - current_position[X_AXIS] = current_position[Y_AXIS] = current_position[Z_AXIS] = (Z_MAX_LENGTH + 10); + current_position[X_AXIS] = current_position[Y_AXIS] = current_position[Z_AXIS] = (DELTA_HEIGHT + home_offset[Z_AXIS] + 10); feedrate_mm_s = homing_feedrate(X_AXIS); line_to_current_position(); stepper.synchronize(); + + // If an endstop was not hit, then damage can occur if homing is continued. + // This can occur if the delta height (DELTA_HEIGHT + home_offset[Z_AXIS]) is + // not set correctly. + if (!(Endstops::endstop_hit_bits & (_BV(X_MAX) | _BV(Y_MAX) | _BV(Z_MAX)))) { + LCD_MESSAGEPGM(MSG_ERR_HOMING_FAILED); + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM(MSG_ERR_HOMING_FAILED); + return false; + } + endstops.hit_on_purpose(); // clear endstop hit flags // At least one carriage has reached the top. @@ -3785,6 +3820,8 @@ inline void gcode_G4() { #if ENABLED(DEBUG_LEVELING_FEATURE) if (DEBUGGING(LEVELING)) DEBUG_POS("<<< home_delta", current_position); #endif + + return true; } #endif // DELTA @@ -4641,10 +4678,6 @@ void home_all_axes() { gcode_G28(true); } SYNC_PLAN_POSITION_KINEMATIC(); } - if (!faux) setup_for_endstop_or_probe_move(); - - //xProbe = yProbe = measured_z = 0; - #if HAS_BED_PROBE // Deploy the probe. Probe will raise if needed. if (DEPLOY_PROBE()) { @@ -4653,6 +4686,8 @@ void home_all_axes() { gcode_G28(true); } } #endif + if (!faux) setup_for_endstop_or_probe_move(); + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) #if ENABLED(PROBE_MANUALLY) @@ -4865,7 +4900,7 @@ void home_all_axes() { gcode_G28(true); } #endif // AUTO_BED_LEVELING_3POINT #else // !PROBE_MANUALLY - + { const bool stow_probe_after_each = parser.boolval('E'); #if ABL_GRID @@ -4873,7 +4908,7 @@ void home_all_axes() { gcode_G28(true); } bool zig = PR_OUTER_END & 1; // Always end at RIGHT and BACK_PROBE_BED_POSITION // Outer loop is Y with PROBE_Y_FIRST disabled - for (uint8_t PR_OUTER_VAR = 0; PR_OUTER_VAR < PR_OUTER_END; PR_OUTER_VAR++) { + for (uint8_t PR_OUTER_VAR = 0; PR_OUTER_VAR < PR_OUTER_END && !isnan(measured_z); PR_OUTER_VAR++) { int8_t inStart, inStop, inInc; @@ -4912,7 +4947,7 @@ void home_all_axes() { gcode_G28(true); } if (isnan(measured_z)) { planner.abl_enabled = abl_should_enable; - return; + break; } #if ENABLED(AUTO_BED_LEVELING_LINEAR) @@ -4948,12 +4983,12 @@ void home_all_axes() { gcode_G28(true); } measured_z = faux ? 0.001 * random(-100, 101) : probe_pt(xProbe, yProbe, stow_probe_after_each, verbose_level); if (isnan(measured_z)) { planner.abl_enabled = abl_should_enable; - return; + break; } points[i].z = measured_z; } - if (!dryrun) { + if (!dryrun && !isnan(measured_z)) { vector_3 planeNormal = vector_3::cross(points[0] - points[1], points[2] - points[1]).get_normal(); if (planeNormal.z < 0) { planeNormal.x *= -1; @@ -4971,9 +5006,9 @@ void home_all_axes() { gcode_G28(true); } // Raise to _Z_CLEARANCE_DEPLOY_PROBE. Stow the probe. if (STOW_PROBE()) { planner.abl_enabled = abl_should_enable; - return; + measured_z = NAN; } - + } #endif // !PROBE_MANUALLY // @@ -4986,9 +5021,6 @@ void home_all_axes() { gcode_G28(true); } // return or loop before this point. // - // Restore state after probing - if (!faux) clean_up_after_endstop_or_probe_move(); - #if ENABLED(DEBUG_LEVELING_FEATURE) if (DEBUGGING(LEVELING)) DEBUG_POS("> probing complete", current_position); #endif @@ -5001,114 +5033,91 @@ void home_all_axes() { gcode_G28(true); } #endif // Calculate leveling, print reports, correct the position - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + if (!isnan(measured_z)) { + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - if (!dryrun) extrapolate_unprobed_bed_level(); - print_bilinear_leveling_grid(); + if (!dryrun) extrapolate_unprobed_bed_level(); + print_bilinear_leveling_grid(); - refresh_bed_level(); + refresh_bed_level(); - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - bed_level_virt_print(); - #endif + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + bed_level_virt_print(); + #endif - #elif ENABLED(AUTO_BED_LEVELING_LINEAR) + #elif ENABLED(AUTO_BED_LEVELING_LINEAR) - // For LINEAR leveling calculate matrix, print reports, correct the position + // For LINEAR leveling calculate matrix, print reports, correct the position - /** - * solve the plane equation ax + by + d = z - * A is the matrix with rows [x y 1] for all the probed points - * B is the vector of the Z positions - * the normal vector to the plane is formed by the coefficients of the - * plane equation in the standard form, which is Vx*x+Vy*y+Vz*z+d = 0 - * so Vx = -a Vy = -b Vz = 1 (we want the vector facing towards positive Z - */ - float plane_equation_coefficients[3]; - - finish_incremental_LSF(&lsf_results); - plane_equation_coefficients[0] = -lsf_results.A; // We should be able to eliminate the '-' on these three lines and down below - plane_equation_coefficients[1] = -lsf_results.B; // but that is not yet tested. - plane_equation_coefficients[2] = -lsf_results.D; - - mean /= abl2; - - if (verbose_level) { - SERIAL_PROTOCOLPGM("Eqn coefficients: a: "); - SERIAL_PROTOCOL_F(plane_equation_coefficients[0], 8); - SERIAL_PROTOCOLPGM(" b: "); - SERIAL_PROTOCOL_F(plane_equation_coefficients[1], 8); - SERIAL_PROTOCOLPGM(" d: "); - SERIAL_PROTOCOL_F(plane_equation_coefficients[2], 8); - SERIAL_EOL(); - if (verbose_level > 2) { - SERIAL_PROTOCOLPGM("Mean of sampled points: "); - SERIAL_PROTOCOL_F(mean, 8); + /** + * solve the plane equation ax + by + d = z + * A is the matrix with rows [x y 1] for all the probed points + * B is the vector of the Z positions + * the normal vector to the plane is formed by the coefficients of the + * plane equation in the standard form, which is Vx*x+Vy*y+Vz*z+d = 0 + * so Vx = -a Vy = -b Vz = 1 (we want the vector facing towards positive Z + */ + float plane_equation_coefficients[3]; + + finish_incremental_LSF(&lsf_results); + plane_equation_coefficients[0] = -lsf_results.A; // We should be able to eliminate the '-' on these three lines and down below + plane_equation_coefficients[1] = -lsf_results.B; // but that is not yet tested. + plane_equation_coefficients[2] = -lsf_results.D; + + mean /= abl2; + + if (verbose_level) { + SERIAL_PROTOCOLPGM("Eqn coefficients: a: "); + SERIAL_PROTOCOL_F(plane_equation_coefficients[0], 8); + SERIAL_PROTOCOLPGM(" b: "); + SERIAL_PROTOCOL_F(plane_equation_coefficients[1], 8); + SERIAL_PROTOCOLPGM(" d: "); + SERIAL_PROTOCOL_F(plane_equation_coefficients[2], 8); SERIAL_EOL(); + if (verbose_level > 2) { + SERIAL_PROTOCOLPGM("Mean of sampled points: "); + SERIAL_PROTOCOL_F(mean, 8); + SERIAL_EOL(); + } } - } - - // Create the matrix but don't correct the position yet - if (!dryrun) - planner.bed_level_matrix = matrix_3x3::create_look_at( - vector_3(-plane_equation_coefficients[0], -plane_equation_coefficients[1], 1) // We can eliminate the '-' here and up above - ); - - // Show the Topography map if enabled - if (do_topography_map) { - - SERIAL_PROTOCOLLNPGM("\nBed Height Topography:\n" - " +--- BACK --+\n" - " | |\n" - " L | (+) | R\n" - " E | | I\n" - " F | (-) N (+) | G\n" - " T | | H\n" - " | (-) | T\n" - " | |\n" - " O-- FRONT --+\n" - " (0,0)"); - float min_diff = 999; - - for (int8_t yy = abl_grid_points_y - 1; yy >= 0; yy--) { - for (uint8_t xx = 0; xx < abl_grid_points_x; xx++) { - int ind = indexIntoAB[xx][yy]; - float diff = eqnBVector[ind] - mean, - x_tmp = eqnAMatrix[ind + 0 * abl2], - y_tmp = eqnAMatrix[ind + 1 * abl2], - z_tmp = 0; - - apply_rotation_xyz(planner.bed_level_matrix, x_tmp, y_tmp, z_tmp); + // Create the matrix but don't correct the position yet + if (!dryrun) + planner.bed_level_matrix = matrix_3x3::create_look_at( + vector_3(-plane_equation_coefficients[0], -plane_equation_coefficients[1], 1) // We can eliminate the '-' here and up above + ); - NOMORE(min_diff, eqnBVector[ind] - z_tmp); + // Show the Topography map if enabled + if (do_topography_map) { - if (diff >= 0.0) - SERIAL_PROTOCOLPGM(" +"); // Include + for column alignment - else - SERIAL_PROTOCOLCHAR(' '); - SERIAL_PROTOCOL_F(diff, 5); - } // xx - SERIAL_EOL(); - } // yy - SERIAL_EOL(); + SERIAL_PROTOCOLLNPGM("\nBed Height Topography:\n" + " +--- BACK --+\n" + " | |\n" + " L | (+) | R\n" + " E | | I\n" + " F | (-) N (+) | G\n" + " T | | H\n" + " | (-) | T\n" + " | |\n" + " O-- FRONT --+\n" + " (0,0)"); - if (verbose_level > 3) { - SERIAL_PROTOCOLLNPGM("\nCorrected Bed Height vs. Bed Topology:"); + float min_diff = 999; for (int8_t yy = abl_grid_points_y - 1; yy >= 0; yy--) { for (uint8_t xx = 0; xx < abl_grid_points_x; xx++) { int ind = indexIntoAB[xx][yy]; - float x_tmp = eqnAMatrix[ind + 0 * abl2], + float diff = eqnBVector[ind] - mean, + x_tmp = eqnAMatrix[ind + 0 * abl2], y_tmp = eqnAMatrix[ind + 1 * abl2], z_tmp = 0; apply_rotation_xyz(planner.bed_level_matrix, x_tmp, y_tmp, z_tmp); - float diff = eqnBVector[ind] - z_tmp - min_diff; + NOMORE(min_diff, eqnBVector[ind] - z_tmp); + if (diff >= 0.0) - SERIAL_PROTOCOLPGM(" +"); - // Include + for column alignment + SERIAL_PROTOCOLPGM(" +"); // Include + for column alignment else SERIAL_PROTOCOLCHAR(' '); SERIAL_PROTOCOL_F(diff, 5); @@ -5116,82 +5125,113 @@ void home_all_axes() { gcode_G28(true); } SERIAL_EOL(); } // yy SERIAL_EOL(); - } - } //do_topography_map - #endif // AUTO_BED_LEVELING_LINEAR + if (verbose_level > 3) { + SERIAL_PROTOCOLLNPGM("\nCorrected Bed Height vs. Bed Topology:"); + + for (int8_t yy = abl_grid_points_y - 1; yy >= 0; yy--) { + for (uint8_t xx = 0; xx < abl_grid_points_x; xx++) { + int ind = indexIntoAB[xx][yy]; + float x_tmp = eqnAMatrix[ind + 0 * abl2], + y_tmp = eqnAMatrix[ind + 1 * abl2], + z_tmp = 0; + + apply_rotation_xyz(planner.bed_level_matrix, x_tmp, y_tmp, z_tmp); + + float diff = eqnBVector[ind] - z_tmp - min_diff; + if (diff >= 0.0) + SERIAL_PROTOCOLPGM(" +"); + // Include + for column alignment + else + SERIAL_PROTOCOLCHAR(' '); + SERIAL_PROTOCOL_F(diff, 5); + } // xx + SERIAL_EOL(); + } // yy + SERIAL_EOL(); + } + } //do_topography_map - #if ABL_PLANAR + #endif // AUTO_BED_LEVELING_LINEAR - // For LINEAR and 3POINT leveling correct the current position + #if ABL_PLANAR - if (verbose_level > 0) - planner.bed_level_matrix.debug(PSTR("\n\nBed Level Correction Matrix:")); + // For LINEAR and 3POINT leveling correct the current position - if (!dryrun) { - // - // Correct the current XYZ position based on the tilted plane. - // + if (verbose_level > 0) + planner.bed_level_matrix.debug(PSTR("\n\nBed Level Correction Matrix:")); - #if ENABLED(DEBUG_LEVELING_FEATURE) - if (DEBUGGING(LEVELING)) DEBUG_POS("G29 uncorrected XYZ", current_position); - #endif + if (!dryrun) { + // + // Correct the current XYZ position based on the tilted plane. + // + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) DEBUG_POS("G29 uncorrected XYZ", current_position); + #endif - float converted[XYZ]; - COPY(converted, current_position); + float converted[XYZ]; + COPY(converted, current_position); - planner.abl_enabled = true; - planner.unapply_leveling(converted); // use conversion machinery - planner.abl_enabled = false; + planner.abl_enabled = true; + planner.unapply_leveling(converted); // use conversion machinery + planner.abl_enabled = false; + + // Use the last measured distance to the bed, if possible + if ( NEAR(current_position[X_AXIS], xProbe - (X_PROBE_OFFSET_FROM_EXTRUDER)) + && NEAR(current_position[Y_AXIS], yProbe - (Y_PROBE_OFFSET_FROM_EXTRUDER)) + ) { + const float simple_z = current_position[Z_AXIS] - measured_z; + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_ECHOPAIR("Z from Probe:", simple_z); + SERIAL_ECHOPAIR(" Matrix:", converted[Z_AXIS]); + SERIAL_ECHOLNPAIR(" Discrepancy:", simple_z - converted[Z_AXIS]); + } + #endif + converted[Z_AXIS] = simple_z; + } + + // The rotated XY and corrected Z are now current_position + COPY(current_position, converted); - // Use the last measured distance to the bed, if possible - if ( NEAR(current_position[X_AXIS], xProbe - (X_PROBE_OFFSET_FROM_EXTRUDER)) - && NEAR(current_position[Y_AXIS], yProbe - (Y_PROBE_OFFSET_FROM_EXTRUDER)) - ) { - const float simple_z = current_position[Z_AXIS] - measured_z; #if ENABLED(DEBUG_LEVELING_FEATURE) - if (DEBUGGING(LEVELING)) { - SERIAL_ECHOPAIR("Z from Probe:", simple_z); - SERIAL_ECHOPAIR(" Matrix:", converted[Z_AXIS]); - SERIAL_ECHOLNPAIR(" Discrepancy:", simple_z - converted[Z_AXIS]); - } + if (DEBUGGING(LEVELING)) DEBUG_POS("G29 corrected XYZ", current_position); #endif - converted[Z_AXIS] = simple_z; } - // The rotated XY and corrected Z are now current_position - COPY(current_position, converted); + #elif ENABLED(AUTO_BED_LEVELING_BILINEAR) - #if ENABLED(DEBUG_LEVELING_FEATURE) - if (DEBUGGING(LEVELING)) DEBUG_POS("G29 corrected XYZ", current_position); - #endif - } + if (!dryrun) { + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("G29 uncorrected Z:", current_position[Z_AXIS]); + #endif - #elif ENABLED(AUTO_BED_LEVELING_BILINEAR) + // Unapply the offset because it is going to be immediately applied + // and cause compensation movement in Z + current_position[Z_AXIS] -= bilinear_z_offset(current_position); - if (!dryrun) { - #if ENABLED(DEBUG_LEVELING_FEATURE) - if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("G29 uncorrected Z:", current_position[Z_AXIS]); - #endif + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR(" corrected Z:", current_position[Z_AXIS]); + #endif + } - // Unapply the offset because it is going to be immediately applied - // and cause compensation movement in Z - current_position[Z_AXIS] -= bilinear_z_offset(current_position); + #endif // ABL_PLANAR + #ifdef Z_PROBE_END_SCRIPT #if ENABLED(DEBUG_LEVELING_FEATURE) - if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR(" corrected Z:", current_position[Z_AXIS]); + if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("Z Probe End Script: ", Z_PROBE_END_SCRIPT); #endif - } + enqueue_and_echo_commands_P(PSTR(Z_PROBE_END_SCRIPT)); + stepper.synchronize(); + #endif - #endif // ABL_PLANAR + // Auto Bed Leveling is complete! Enable if possible. + planner.abl_enabled = dryrun ? abl_should_enable : true; + } // !isnan(measured_z) - #ifdef Z_PROBE_END_SCRIPT - #if ENABLED(DEBUG_LEVELING_FEATURE) - if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("Z Probe End Script: ", Z_PROBE_END_SCRIPT); - #endif - enqueue_and_echo_commands_P(PSTR(Z_PROBE_END_SCRIPT)); - stepper.synchronize(); - #endif + // Restore state after probing + if (!faux) clean_up_after_endstop_or_probe_move(); #if ENABLED(DEBUG_LEVELING_FEATURE) if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("<<< gcode_G29"); @@ -5201,9 +5241,6 @@ void home_all_axes() { gcode_G28(true); } KEEPALIVE_STATE(IN_HANDLER); - // Auto Bed Leveling is complete! Enable if possible. - planner.abl_enabled = dryrun ? abl_should_enable : true; - if (planner.abl_enabled) SYNC_PLAN_POSITION_KINEMATIC(); } @@ -5319,6 +5356,21 @@ void home_all_axes() { gcode_G28(true); } } } + void G33_cleanup( + #if HOTENDS > 1 + const uint8_t old_tool_index + #endif + ) { + #if ENABLED(DELTA_HOME_TO_SAFE_ZONE) + do_blocking_move_to_z(delta_clip_start_height); + #endif + STOW_PROBE(); + clean_up_after_endstop_or_probe_move(); + #if HOTENDS > 1 + tool_change(old_tool_index, 0, true); + #endif + } + inline void gcode_G33() { const int8_t probe_points = parser.intval('P', DELTA_CALIBRATION_DEFAULT_POINTS); @@ -5395,14 +5447,19 @@ void home_all_axes() { gcode_G28(true); } #if HAS_LEVELING reset_bed_level(); // After calibration bed-level data is no longer valid #endif + #if HOTENDS > 1 const uint8_t old_tool_index = active_extruder; tool_change(0, 0, true); + #define G33_CLEANUP() G33_cleanup(old_tool_index) + #else + #define G33_CLEANUP() G33_cleanup() #endif + setup_for_endstop_or_probe_move(); - DEPLOY_PROBE(); endstops.enable(true); - home_delta(); + if (!home_delta()) + return; endstops.not_homing(); // print settings @@ -5416,7 +5473,9 @@ void home_all_axes() { gcode_G28(true); } print_G33_settings(!_1p_calibration, _7p_calibration && towers_set); #if DISABLED(PROBE_MANUALLY) - home_offset[Z_AXIS] -= probe_pt(dx, dy, stow_after_each, 1, false); // 1st probe to set height + const float measured_z = probe_pt(dx, dy, stow_after_each, 1, false); // 1st probe to set height + if (isnan(measured_z)) return G33_CLEANUP(); + home_offset[Z_AXIS] -= measured_z; #endif do { @@ -5434,6 +5493,7 @@ void home_all_axes() { gcode_G28(true); } z_at_pt[0] += lcd_probe_pt(0, 0); #else z_at_pt[0] += probe_pt(dx, dy, stow_after_each, 1, false); + if (isnan(z_at_pt[0])) return G33_CLEANUP(); #endif } if (_7p_calibration) { // probe extra center points @@ -5442,7 +5502,8 @@ void home_all_axes() { gcode_G28(true); } #if ENABLED(PROBE_MANUALLY) z_at_pt[0] += lcd_probe_pt(cos(a) * r, sin(a) * r); #else - z_at_pt[0] += probe_pt(cos(a) * r + dx, sin(a) * r + dy, stow_after_each, 1, false); + z_at_pt[0] += probe_pt(cos(a) * r + dx, sin(a) * r + dy, stow_after_each, 1); + if (isnan(z_at_pt[0])) return G33_CLEANUP(); #endif } z_at_pt[0] /= float(_7p_double_circle ? 7 : probe_points); @@ -5462,7 +5523,8 @@ void home_all_axes() { gcode_G28(true); } #if ENABLED(PROBE_MANUALLY) z_at_pt[axis] += lcd_probe_pt(cos(a) * r, sin(a) * r); #else - z_at_pt[axis] += probe_pt(cos(a) * r + dx, sin(a) * r + dy, stow_after_each, 1, false); + z_at_pt[axis] += probe_pt(cos(a) * r + dx, sin(a) * r + dy, stow_after_each, 1); + if (isnan(z_at_pt[axis])) return G33_CLEANUP(); #endif } zig_zag = !zig_zag; @@ -5662,14 +5724,7 @@ void home_all_axes() { gcode_G28(true); } } while ((zero_std_dev < test_precision && zero_std_dev > calibration_precision && iterations < 31) || iterations <= force_iterations); - #if ENABLED(DELTA_HOME_TO_SAFE_ZONE) - do_blocking_move_to_z(delta_clip_start_height); - #endif - STOW_PROBE(); - clean_up_after_endstop_or_probe_move(); - #if HOTENDS > 1 - tool_change(old_tool_index, 0, true); - #endif + G33_CLEANUP(); } #endif // DELTA_AUTO_CALIBRATION @@ -6980,152 +7035,159 @@ inline void gcode_M42() { setup_for_endstop_or_probe_move(); + double mean = 0.0, sigma = 0.0, min = 99999.9, max = -99999.9, sample_set[n_samples]; + // Move to the first point, deploy, and probe const float t = probe_pt(X_probe_location, Y_probe_location, stow_probe_after_each, verbose_level); - if (isnan(t)) return; - - randomSeed(millis()); - - double mean = 0.0, sigma = 0.0, min = 99999.9, max = -99999.9, sample_set[n_samples]; + bool probing_good = !isnan(t); + + if (probing_good) { + randomSeed(millis()); + + for (uint8_t n = 0; n < n_samples; n++) { + if (n_legs) { + const int dir = (random(0, 10) > 5.0) ? -1 : 1; // clockwise or counter clockwise + float angle = random(0.0, 360.0); + const float radius = random( + #if ENABLED(DELTA) + 0.1250000000 * (DELTA_PROBEABLE_RADIUS), + 0.3333333333 * (DELTA_PROBEABLE_RADIUS) + #else + 5.0, 0.125 * min(X_BED_SIZE, Y_BED_SIZE) + #endif + ); - for (uint8_t n = 0; n < n_samples; n++) { - if (n_legs) { - const int dir = (random(0, 10) > 5.0) ? -1 : 1; // clockwise or counter clockwise - float angle = random(0.0, 360.0); - const float radius = random( - #if ENABLED(DELTA) - 0.1250000000 * (DELTA_PROBEABLE_RADIUS), - 0.3333333333 * (DELTA_PROBEABLE_RADIUS) - #else - 5.0, 0.125 * min(X_BED_SIZE, Y_BED_SIZE) - #endif - ); - - if (verbose_level > 3) { - SERIAL_ECHOPAIR("Starting radius: ", radius); - SERIAL_ECHOPAIR(" angle: ", angle); - SERIAL_ECHOPGM(" Direction: "); - if (dir > 0) SERIAL_ECHOPGM("Counter-"); - SERIAL_ECHOLNPGM("Clockwise"); - } + if (verbose_level > 3) { + SERIAL_ECHOPAIR("Starting radius: ", radius); + SERIAL_ECHOPAIR(" angle: ", angle); + SERIAL_ECHOPGM(" Direction: "); + if (dir > 0) SERIAL_ECHOPGM("Counter-"); + SERIAL_ECHOLNPGM("Clockwise"); + } - for (uint8_t l = 0; l < n_legs - 1; l++) { - double delta_angle; + for (uint8_t l = 0; l < n_legs - 1; l++) { + double delta_angle; - if (schizoid_flag) - // The points of a 5 point star are 72 degrees apart. We need to - // skip a point and go to the next one on the star. - delta_angle = dir * 2.0 * 72.0; + if (schizoid_flag) + // The points of a 5 point star are 72 degrees apart. We need to + // skip a point and go to the next one on the star. + delta_angle = dir * 2.0 * 72.0; - else - // If we do this line, we are just trying to move further - // around the circle. - delta_angle = dir * (float) random(25, 45); + else + // If we do this line, we are just trying to move further + // around the circle. + delta_angle = dir * (float) random(25, 45); - angle += delta_angle; + angle += delta_angle; - while (angle > 360.0) // We probably do not need to keep the angle between 0 and 2*PI, but the - angle -= 360.0; // Arduino documentation says the trig functions should not be given values - while (angle < 0.0) // outside of this range. It looks like they behave correctly with - angle += 360.0; // numbers outside of the range, but just to be safe we clamp them. + while (angle > 360.0) // We probably do not need to keep the angle between 0 and 2*PI, but the + angle -= 360.0; // Arduino documentation says the trig functions should not be given values + while (angle < 0.0) // outside of this range. It looks like they behave correctly with + angle += 360.0; // numbers outside of the range, but just to be safe we clamp them. - X_current = X_probe_location - (X_PROBE_OFFSET_FROM_EXTRUDER) + cos(RADIANS(angle)) * radius; - Y_current = Y_probe_location - (Y_PROBE_OFFSET_FROM_EXTRUDER) + sin(RADIANS(angle)) * radius; + X_current = X_probe_location - (X_PROBE_OFFSET_FROM_EXTRUDER) + cos(RADIANS(angle)) * radius; + Y_current = Y_probe_location - (Y_PROBE_OFFSET_FROM_EXTRUDER) + sin(RADIANS(angle)) * radius; - #if DISABLED(DELTA) - X_current = constrain(X_current, X_MIN_POS, X_MAX_POS); - Y_current = constrain(Y_current, Y_MIN_POS, Y_MAX_POS); - #else - // If we have gone out too far, we can do a simple fix and scale the numbers - // back in closer to the origin. - while (!position_is_reachable_by_probe_xy(X_current, Y_current)) { - X_current *= 0.8; - Y_current *= 0.8; - if (verbose_level > 3) { - SERIAL_ECHOPAIR("Pulling point towards center:", X_current); - SERIAL_ECHOLNPAIR(", ", Y_current); + #if DISABLED(DELTA) + X_current = constrain(X_current, X_MIN_POS, X_MAX_POS); + Y_current = constrain(Y_current, Y_MIN_POS, Y_MAX_POS); + #else + // If we have gone out too far, we can do a simple fix and scale the numbers + // back in closer to the origin. + while (!position_is_reachable_by_probe_xy(X_current, Y_current)) { + X_current *= 0.8; + Y_current *= 0.8; + if (verbose_level > 3) { + SERIAL_ECHOPAIR("Pulling point towards center:", X_current); + SERIAL_ECHOLNPAIR(", ", Y_current); + } } + #endif + if (verbose_level > 3) { + SERIAL_PROTOCOLPGM("Going to:"); + SERIAL_ECHOPAIR(" X", X_current); + SERIAL_ECHOPAIR(" Y", Y_current); + SERIAL_ECHOLNPAIR(" Z", current_position[Z_AXIS]); } - #endif - if (verbose_level > 3) { - SERIAL_PROTOCOLPGM("Going to:"); - SERIAL_ECHOPAIR(" X", X_current); - SERIAL_ECHOPAIR(" Y", Y_current); - SERIAL_ECHOLNPAIR(" Z", current_position[Z_AXIS]); - } - do_blocking_move_to_xy(X_current, Y_current); - } // n_legs loop - } // n_legs + do_blocking_move_to_xy(X_current, Y_current); + } // n_legs loop + } // n_legs - // Probe a single point - sample_set[n] = probe_pt(X_probe_location, Y_probe_location, stow_probe_after_each, 0); + // Probe a single point + sample_set[n] = probe_pt(X_probe_location, Y_probe_location, stow_probe_after_each, 0); - /** - * Get the current mean for the data points we have so far - */ - double sum = 0.0; - for (uint8_t j = 0; j <= n; j++) sum += sample_set[j]; - mean = sum / (n + 1); + // Break the loop if the probe fails + probing_good = !isnan(sample_set[n]); + if (!probing_good) break; - NOMORE(min, sample_set[n]); - NOLESS(max, sample_set[n]); + /** + * Get the current mean for the data points we have so far + */ + double sum = 0.0; + for (uint8_t j = 0; j <= n; j++) sum += sample_set[j]; + mean = sum / (n + 1); - /** - * Now, use that mean to calculate the standard deviation for the - * data points we have so far - */ - sum = 0.0; - for (uint8_t j = 0; j <= n; j++) - sum += sq(sample_set[j] - mean); + NOMORE(min, sample_set[n]); + NOLESS(max, sample_set[n]); - sigma = SQRT(sum / (n + 1)); - if (verbose_level > 0) { - if (verbose_level > 1) { - SERIAL_PROTOCOL(n + 1); - SERIAL_PROTOCOLPGM(" of "); - SERIAL_PROTOCOL((int)n_samples); - SERIAL_PROTOCOLPGM(": z: "); - SERIAL_PROTOCOL_F(sample_set[n], 3); - if (verbose_level > 2) { - SERIAL_PROTOCOLPGM(" mean: "); - SERIAL_PROTOCOL_F(mean, 4); - SERIAL_PROTOCOLPGM(" sigma: "); - SERIAL_PROTOCOL_F(sigma, 6); - SERIAL_PROTOCOLPGM(" min: "); - SERIAL_PROTOCOL_F(min, 3); - SERIAL_PROTOCOLPGM(" max: "); - SERIAL_PROTOCOL_F(max, 3); - SERIAL_PROTOCOLPGM(" range: "); - SERIAL_PROTOCOL_F(max-min, 3); + /** + * Now, use that mean to calculate the standard deviation for the + * data points we have so far + */ + sum = 0.0; + for (uint8_t j = 0; j <= n; j++) + sum += sq(sample_set[j] - mean); + + sigma = SQRT(sum / (n + 1)); + if (verbose_level > 0) { + if (verbose_level > 1) { + SERIAL_PROTOCOL(n + 1); + SERIAL_PROTOCOLPGM(" of "); + SERIAL_PROTOCOL((int)n_samples); + SERIAL_PROTOCOLPGM(": z: "); + SERIAL_PROTOCOL_F(sample_set[n], 3); + if (verbose_level > 2) { + SERIAL_PROTOCOLPGM(" mean: "); + SERIAL_PROTOCOL_F(mean, 4); + SERIAL_PROTOCOLPGM(" sigma: "); + SERIAL_PROTOCOL_F(sigma, 6); + SERIAL_PROTOCOLPGM(" min: "); + SERIAL_PROTOCOL_F(min, 3); + SERIAL_PROTOCOLPGM(" max: "); + SERIAL_PROTOCOL_F(max, 3); + SERIAL_PROTOCOLPGM(" range: "); + SERIAL_PROTOCOL_F(max-min, 3); + } + SERIAL_EOL(); } - SERIAL_EOL(); } - } - } // End of probe loop + } // n_samples loop + } + + STOW_PROBE(); - if (STOW_PROBE()) return; + if (probing_good) { + SERIAL_PROTOCOLLNPGM("Finished!"); - SERIAL_PROTOCOLPGM("Finished!"); - SERIAL_EOL(); + if (verbose_level > 0) { + SERIAL_PROTOCOLPGM("Mean: "); + SERIAL_PROTOCOL_F(mean, 6); + SERIAL_PROTOCOLPGM(" Min: "); + SERIAL_PROTOCOL_F(min, 3); + SERIAL_PROTOCOLPGM(" Max: "); + SERIAL_PROTOCOL_F(max, 3); + SERIAL_PROTOCOLPGM(" Range: "); + SERIAL_PROTOCOL_F(max-min, 3); + SERIAL_EOL(); + } - if (verbose_level > 0) { - SERIAL_PROTOCOLPGM("Mean: "); - SERIAL_PROTOCOL_F(mean, 6); - SERIAL_PROTOCOLPGM(" Min: "); - SERIAL_PROTOCOL_F(min, 3); - SERIAL_PROTOCOLPGM(" Max: "); - SERIAL_PROTOCOL_F(max, 3); - SERIAL_PROTOCOLPGM(" Range: "); - SERIAL_PROTOCOL_F(max-min, 3); + SERIAL_PROTOCOLPGM("Standard Deviation: "); + SERIAL_PROTOCOL_F(sigma, 6); + SERIAL_EOL(); SERIAL_EOL(); } - SERIAL_PROTOCOLPGM("Standard Deviation: "); - SERIAL_PROTOCOL_F(sigma, 6); - SERIAL_EOL(); - SERIAL_EOL(); - clean_up_after_endstop_or_probe_move(); // Re-enable bed level correction if it had been on @@ -11453,19 +11515,22 @@ void ok_to_send() { // DELTA_PRINTABLE_RADIUS from center of bed, but delta // now enforces is_position_reachable for X/Y regardless // of HAS_SOFTWARE_ENDSTOPS, so that enforcement would be - // redundant here. Probably should #ifdef out the X/Y - // axis clamps here for delta and just leave the Z clamp. + // redundant here. void clamp_to_software_endstops(float target[XYZ]) { if (!soft_endstops_enabled) return; #if ENABLED(MIN_SOFTWARE_ENDSTOPS) - NOLESS(target[X_AXIS], soft_endstop_min[X_AXIS]); - NOLESS(target[Y_AXIS], soft_endstop_min[Y_AXIS]); + #if DISABLED(DELTA) + NOLESS(target[X_AXIS], soft_endstop_min[X_AXIS]); + NOLESS(target[Y_AXIS], soft_endstop_min[Y_AXIS]); + #endif NOLESS(target[Z_AXIS], soft_endstop_min[Z_AXIS]); #endif #if ENABLED(MAX_SOFTWARE_ENDSTOPS) - NOMORE(target[X_AXIS], soft_endstop_max[X_AXIS]); - NOMORE(target[Y_AXIS], soft_endstop_max[Y_AXIS]); + #if DISABLED(DELTA) + NOMORE(target[X_AXIS], soft_endstop_max[X_AXIS]); + NOMORE(target[Y_AXIS], soft_endstop_max[Y_AXIS]); + #endif NOMORE(target[Z_AXIS], soft_endstop_max[Z_AXIS]); #endif } diff --git a/Marlin/endstops.cpp b/Marlin/endstops.cpp index 32541b675d..8ff6c7668a 100644 --- a/Marlin/endstops.cpp +++ b/Marlin/endstops.cpp @@ -247,7 +247,7 @@ void Endstops::update() { #define _ENDSTOP(AXIS, MINMAX) AXIS ##_## MINMAX #define _ENDSTOP_PIN(AXIS, MINMAX) AXIS ##_## MINMAX ##_PIN #define _ENDSTOP_INVERTING(AXIS, MINMAX) AXIS ##_## MINMAX ##_ENDSTOP_INVERTING - #define _ENDSTOP_HIT(AXIS) SBI(endstop_hit_bits, _ENDSTOP(AXIS, MIN)) + #define _ENDSTOP_HIT(AXIS, MINMAX) SBI(endstop_hit_bits, _ENDSTOP(AXIS, MINMAX)) // UPDATE_ENDSTOP_BIT: set the current endstop bits for an endstop to its status #define UPDATE_ENDSTOP_BIT(AXIS, MINMAX) SET_BIT(current_endstop_bits, _ENDSTOP(AXIS, MINMAX), (READ(_ENDSTOP_PIN(AXIS, MINMAX)) != _ENDSTOP_INVERTING(AXIS, MINMAX))) @@ -257,7 +257,7 @@ void Endstops::update() { #define UPDATE_ENDSTOP(AXIS,MINMAX) do { \ UPDATE_ENDSTOP_BIT(AXIS, MINMAX); \ if (TEST_ENDSTOP(_ENDSTOP(AXIS, MINMAX)) && stepper.current_block->steps[_AXIS(AXIS)] > 0) { \ - _ENDSTOP_HIT(AXIS); \ + _ENDSTOP_HIT(AXIS, MINMAX); \ stepper.endstop_triggered(_AXIS(AXIS)); \ } \ } while(0) @@ -267,9 +267,9 @@ void Endstops::update() { if (G38_move) { UPDATE_ENDSTOP_BIT(Z, MIN_PROBE); if (TEST_ENDSTOP(_ENDSTOP(Z, MIN_PROBE))) { - if (stepper.current_block->steps[_AXIS(X)] > 0) { _ENDSTOP_HIT(X); stepper.endstop_triggered(_AXIS(X)); } - else if (stepper.current_block->steps[_AXIS(Y)] > 0) { _ENDSTOP_HIT(Y); stepper.endstop_triggered(_AXIS(Y)); } - else if (stepper.current_block->steps[_AXIS(Z)] > 0) { _ENDSTOP_HIT(Z); stepper.endstop_triggered(_AXIS(Z)); } + if (stepper.current_block->steps[_AXIS(X)] > 0) { _ENDSTOP_HIT(X, MIN); stepper.endstop_triggered(_AXIS(X)); } + else if (stepper.current_block->steps[_AXIS(Y)] > 0) { _ENDSTOP_HIT(Y, MIN); stepper.endstop_triggered(_AXIS(Y)); } + else if (stepper.current_block->steps[_AXIS(Z)] > 0) { _ENDSTOP_HIT(Z, MIN); stepper.endstop_triggered(_AXIS(Z)); } G38_endstop_hit = true; } } diff --git a/Marlin/language_en.h b/Marlin/language_en.h index 5da9d96484..52d9aa49e7 100644 --- a/Marlin/language_en.h +++ b/Marlin/language_en.h @@ -717,7 +717,7 @@ #define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrate Center") #endif #ifndef MSG_DELTA_SETTINGS - #define MSG_DELTA_SETTINGS _UxGT("Show Delta Settings") + #define MSG_DELTA_SETTINGS _UxGT("Delta Settings") #endif #ifndef MSG_DELTA_AUTO_CALIBRATE #define MSG_DELTA_AUTO_CALIBRATE _UxGT("Auto Calibration") @@ -725,6 +725,15 @@ #ifndef MSG_DELTA_HEIGHT_CALIBRATE #define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Set Delta Height") #endif +#ifndef MSG_DELTA_DIAG_ROG + #define MSG_DELTA_DIAG_ROG _UxGT("Diag Rod") +#endif +#ifndef MSG_DELTA_HEIGHT + #define MSG_DELTA_HEIGHT _UxGT("Height") +#endif +#ifndef MSG_DELTA_RADIUS + #define MSG_DELTA_RADIUS _UxGT("Radius") +#endif #ifndef MSG_INFO_MENU #define MSG_INFO_MENU _UxGT("About Printer") #endif @@ -840,6 +849,12 @@ #ifndef MSG_FILAMENT_CHANGE_NOZZLE #define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Nozzle: ") #endif +#ifndef MSG_ERR_HOMING_FAILED + #define MSG_ERR_HOMING_FAILED _UxGT("Homing failed") +#endif +#ifndef MSG_ERR_PROBING_FAILED + #define MSG_ERR_PROBING_FAILED _UxGT("Probing failed") +#endif // // Filament Change screens show up to 3 lines on a 4-line display diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index baefcf97fe..23b807e3ba 100644 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -2537,15 +2537,23 @@ void kill_screen(const char* lcd_msg) { void _goto_tower_z() { _man_probe_pt(cos(RADIANS( 90)) * delta_calibration_radius, sin(RADIANS( 90)) * delta_calibration_radius); } void _goto_center() { _man_probe_pt(0,0); } - void lcd_delta_G33_settings() { + static float _delta_height = DELTA_HEIGHT; + void _lcd_set_delta_height() { + home_offset[Z_AXIS] = _delta_height - DELTA_HEIGHT; + update_software_endstops(Z_AXIS); + } + + void lcd_delta_settings() { START_MENU(); MENU_BACK(MSG_DELTA_CALIBRATE); - float delta_height = DELTA_HEIGHT + home_offset[Z_AXIS], Tz = 0.00; - MENU_ITEM_EDIT(float52, "Height", &delta_height, delta_height, delta_height); + float Tz = 0.00; + MENU_ITEM_EDIT(float52, MSG_DELTA_DIAG_ROG, &delta_diagonal_rod, DELTA_DIAGONAL_ROD - 5.0, DELTA_DIAGONAL_ROD + 5.0); + _delta_height = DELTA_HEIGHT + home_offset[Z_AXIS]; + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float52, MSG_DELTA_HEIGHT, &_delta_height, _delta_height - 10.0, _delta_height + 10.0, _lcd_set_delta_height); MENU_ITEM_EDIT(float43, "Ex", &endstop_adj[A_AXIS], -5.0, 5.0); MENU_ITEM_EDIT(float43, "Ey", &endstop_adj[B_AXIS], -5.0, 5.0); MENU_ITEM_EDIT(float43, "Ez", &endstop_adj[C_AXIS], -5.0, 5.0); - MENU_ITEM_EDIT(float52, "Radius", &delta_radius, DELTA_RADIUS - 5.0, DELTA_RADIUS + 5.0); + MENU_ITEM_EDIT(float52, MSG_DELTA_RADIUS, &delta_radius, DELTA_RADIUS - 5.0, DELTA_RADIUS + 5.0); MENU_ITEM_EDIT(float43, "Tx", &delta_tower_angle_trim[A_AXIS], -5.0, 5.0); MENU_ITEM_EDIT(float43, "Ty", &delta_tower_angle_trim[B_AXIS], -5.0, 5.0); MENU_ITEM_EDIT(float43, "Tz", &Tz, -5.0, 5.0); @@ -2556,7 +2564,7 @@ void kill_screen(const char* lcd_msg) { START_MENU(); MENU_BACK(MSG_MAIN); #if ENABLED(DELTA_AUTO_CALIBRATION) - MENU_ITEM(submenu, MSG_DELTA_SETTINGS, lcd_delta_G33_settings); + MENU_ITEM(submenu, MSG_DELTA_SETTINGS, lcd_delta_settings); MENU_ITEM(gcode, MSG_DELTA_AUTO_CALIBRATE, PSTR("G33")); MENU_ITEM(gcode, MSG_DELTA_HEIGHT_CALIBRATE, PSTR("G33 P1")); #if ENABLED(EEPROM_SETTINGS)