diff --git a/Marlin/src/HAL/HAL_LCD_defines.h b/Marlin/src/HAL/HAL_LCD_defines.h
new file mode 100644
index 0000000000..6b2a53d238
--- /dev/null
+++ b/Marlin/src/HAL/HAL_LCD_defines.h
@@ -0,0 +1,43 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+
+#ifndef HAL_LCD_DEFINES_H_
+#define HAL_LCD_DEFINES_H_
+
+#ifdef ARDUINO_ARCH_SAM
+// #include "HAL_DUE/HAL_DUE_LCD_defines.h"
+
+#elif defined(IS_32BIT_TEENSY)
+// #include "HAL_TEENSY35_36/HAL_TEENSY_LCD_defines.h"
+
+#elif defined(ARDUINO_ARCH_AVR)
+// #include "HAL_AVR/HAL_ARDUINO_LCD_defines.h"
+
+#elif defined(TARGET_LPC1768)
+ #include "HAL_LPC1768/HAL_LPC1768_LCD_defines.h"
+
+#else
+ #error "Unsupported Platform!"
+#endif
+
+#endif // HAL_LCD_DEFINES_H_
diff --git a/Marlin/src/HAL/HAL_LPC1768/HAL_LCD_I2C_routines.c b/Marlin/src/HAL/HAL_LPC1768/HAL_LCD_I2C_routines.c
new file mode 100644
index 0000000000..e43032b094
--- /dev/null
+++ b/Marlin/src/HAL/HAL_LPC1768/HAL_LCD_I2C_routines.c
@@ -0,0 +1,183 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+// adapted from I2C/master/master.c example
+// https://www-users.cs.york.ac.uk/~pcc/MCP/HAPR-Course-web/CMSIS/examples/html/master_8c_source.html
+
+
+
+#if defined(TARGET_LPC1768)
+
+ #ifdef __cplusplus
+ extern "C" {
+ #endif
+
+ #include
+ #include
+ #include
+
+ //////////////////////////////////////////////////////////////////////////////////////
+
+ // These two routines are exact copies of the lpc17xx_i2c.c routines. Couldn't link to
+ // to the lpc17xx_i2c.c routines so had to copy them into this file & rename them.
+
+ static uint32_t _I2C_Start (LPC_I2C_TypeDef *I2Cx)
+ {
+ // Reset STA, STO, SI
+ I2Cx->I2CONCLR = I2C_I2CONCLR_SIC|I2C_I2CONCLR_STOC|I2C_I2CONCLR_STAC;
+
+ // Enter to Master Transmitter mode
+ I2Cx->I2CONSET = I2C_I2CONSET_STA;
+
+ // Wait for complete
+ while (!(I2Cx->I2CONSET & I2C_I2CONSET_SI));
+ I2Cx->I2CONCLR = I2C_I2CONCLR_STAC;
+ return (I2Cx->I2STAT & I2C_STAT_CODE_BITMASK);
+ }
+
+ static void _I2C_Stop (LPC_I2C_TypeDef *I2Cx)
+ {
+
+ /* Make sure start bit is not active */
+ if (I2Cx->I2CONSET & I2C_I2CONSET_STA)
+ {
+ I2Cx->I2CONCLR = I2C_I2CONCLR_STAC;
+ }
+
+ I2Cx->I2CONSET = I2C_I2CONSET_STO|I2C_I2CONSET_AA;
+
+ I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
+ }
+
+
+ //////////////////////////////////////////////////////////////////////////////////////
+
+ #define U8G_I2C_OPT_FAST 16 // from u8g.h
+
+ #define USEDI2CDEV_M 1
+
+ #define I2CDEV_S_ADDR 0x78 // from SSD1306 //actual address is 0x3C - shift left 1 with LSB set to 0 to indicate write
+
+ #define BUFFER_SIZE 0x1 // only do single byte transfers with LCDs
+
+ #if (USEDI2CDEV_M == 0)
+ #define I2CDEV_M LPC_I2C0
+ #elif (USEDI2CDEV_M == 1)
+ #define I2CDEV_M LPC_I2C1
+ #elif (USEDI2CDEV_M == 2)
+ #define I2CDEV_M LPC_I2C2
+ #else
+ #error "Master I2C device not defined!"
+ #endif
+
+
+ PINSEL_CFG_Type PinCfg;
+ I2C_M_SETUP_Type transferMCfg;
+
+ #define I2C_status (LPC_I2C1->I2STAT & I2C_STAT_CODE_BITMASK)
+
+
+ uint8_t u8g_i2c_start(uint8_t sla) { // send slave address and write bit
+ // Sometimes TX data ACK or NAK status is returned. That mean the start state didn't
+ // happen which means only the value of the slave address was send. Keep looping until
+ // the slave address and write bit are actually sent.
+ do{
+ _I2C_Stop(I2CDEV_M); // output stop state on I2C bus
+ _I2C_Start(I2CDEV_M); // output start state on I2C bus
+ while ((I2C_status != I2C_I2STAT_M_TX_START)
+ && (I2C_status != I2C_I2STAT_M_TX_RESTART)
+ && (I2C_status != I2C_I2STAT_M_TX_DAT_ACK)
+ && (I2C_status != I2C_I2STAT_M_TX_DAT_NACK)); //wait for start to be asserted
+
+ LPC_I2C1->I2CONCLR = I2C_I2CONCLR_STAC; // clear start state before tansmitting slave address
+ LPC_I2C1->I2DAT = I2CDEV_S_ADDR & I2C_I2DAT_BITMASK; // transmit slave address & write bit
+ LPC_I2C1->I2CONSET = I2C_I2CONSET_AA;
+ LPC_I2C1->I2CONCLR = I2C_I2CONCLR_SIC;
+ while ((I2C_status != I2C_I2STAT_M_TX_SLAW_ACK)
+ && (I2C_status != I2C_I2STAT_M_TX_SLAW_NACK)
+ && (I2C_status != I2C_I2STAT_M_TX_DAT_ACK)
+ && (I2C_status != I2C_I2STAT_M_TX_DAT_NACK)); //wait for slaw to finish
+ }while ( (I2C_status == I2C_I2STAT_M_TX_DAT_ACK) || (I2C_status == I2C_I2STAT_M_TX_DAT_NACK));
+ return 1;
+ }
+
+
+ void u8g_i2c_init(uint8_t clock_option) {
+
+ /*
+ * Init I2C pin connect
+ */
+ PinCfg.OpenDrain = 0;
+ PinCfg.Pinmode = 0;
+ #if ((USEDI2CDEV_M == 0))
+ PinCfg.Funcnum = 1;
+ PinCfg.Pinnum = 27;
+ PinCfg.Portnum = 0;
+ PINSEL_ConfigPin(&PinCfg); // SDA0 / D57 AUX-1
+ PinCfg.Pinnum = 28;
+ PINSEL_ConfigPin(&PinCfg); // SCL0 / D58 AUX-1
+ #endif
+ #if ((USEDI2CDEV_M == 1))
+ PinCfg.Funcnum = 3;
+ PinCfg.Pinnum = 0;
+ PinCfg.Portnum = 0;
+ PINSEL_ConfigPin(&PinCfg); // SDA1 / D20 SCA
+ PinCfg.Pinnum = 1;
+ PINSEL_ConfigPin(&PinCfg); // SCL1 / D21 SCL
+ #endif
+ #if ((USEDI2CDEV_M == 2))
+ PinCfg.Funcnum = 2;
+ PinCfg.Pinnum = 10;
+ PinCfg.Portnum = 0;
+ PINSEL_ConfigPin(&PinCfg); // SDA2 / D38 X_ENABLE_PIN
+ PinCfg.Pinnum = 11;
+ PINSEL_ConfigPin(&PinCfg); // SCL2 / D55 X_DIR_PIN
+ #endif
+ // Initialize I2C peripheral
+ I2C_Init(I2CDEV_M, (clock_option & U8G_I2C_OPT_FAST) ? 400000: 100000); // LCD data rates
+
+ /* Enable Master I2C operation */
+ I2C_Cmd(I2CDEV_M, I2C_MASTER_MODE, ENABLE);
+
+ u8g_i2c_start(0); // send slave address and write bit
+ }
+
+ volatile extern uint32_t _millis;
+ uint8_t u8g_i2c_send_byte(uint8_t data) {
+ #define I2C_TIMEOUT 3
+ LPC_I2C1->I2DAT = data & I2C_I2DAT_BITMASK; // transmit data
+ LPC_I2C1->I2CONSET = I2C_I2CONSET_AA;
+ LPC_I2C1->I2CONCLR = I2C_I2CONCLR_SIC;
+ uint32_t timeout = _millis + I2C_TIMEOUT;
+ while ((I2C_status != I2C_I2STAT_M_TX_DAT_ACK) && (I2C_status != I2C_I2STAT_M_TX_DAT_NACK) && (timeout > _millis)); // wait for xmit to finish
+ // had hangs with SH1106 so added time out - have seen temporary screen corruption when this happens
+ return 1;
+ }
+
+ void u8g_i2c_stop(void) {
+ }
+
+
+ #ifdef __cplusplus
+ }
+ #endif
+#endif
diff --git a/Marlin/src/HAL/HAL_LPC1768/HAL_LCD_I2C_routines.h b/Marlin/src/HAL/HAL_LPC1768/HAL_LCD_I2C_routines.h
new file mode 100644
index 0000000000..f53161f6d0
--- /dev/null
+++ b/Marlin/src/HAL/HAL_LPC1768/HAL_LCD_I2C_routines.h
@@ -0,0 +1,35 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+#if defined(TARGET_LPC1768)
+
+ void u8g_i2c_init(uint8_t options);
+
+ uint8_t u8g_i2c_wait(uint8_t mask, uint8_t pos);
+
+ uint8_t u8g_i2c_start(uint8_t sla);
+
+ uint8_t u8g_i2c_send_byte(uint8_t data);
+
+ void u8g_i2c_stop(void);
+
+#endif
diff --git a/Marlin/src/HAL/HAL_LPC1768/HAL_LCD_delay.h b/Marlin/src/HAL/HAL_LPC1768/HAL_LCD_delay.h
new file mode 100644
index 0000000000..3a7b3a4839
--- /dev/null
+++ b/Marlin/src/HAL/HAL_LPC1768/HAL_LCD_delay.h
@@ -0,0 +1,46 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+/**
+ * LCD delay routines - used by all the drivers.
+ *
+ * These are based on the LPC1768 routines.
+ *
+ * Couldn't just call exact copies because the overhead resulted in the
+ * one microsecond delay being about 4uS.
+ */
+
+
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+void U8g_delay(int msec);
+
+void u8g_MicroDelay(void);
+
+void u8g_10MicroDelay(void);
+
+#ifdef __cplusplus
+ }
+#endif
\ No newline at end of file
diff --git a/Marlin/src/HAL/HAL_LPC1768/HAL_LCD_pin_routines.c b/Marlin/src/HAL/HAL_LPC1768/HAL_LCD_pin_routines.c
new file mode 100644
index 0000000000..35c02ffec1
--- /dev/null
+++ b/Marlin/src/HAL/HAL_LPC1768/HAL_LCD_pin_routines.c
@@ -0,0 +1,116 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+/**
+ * Low level pin manipulation routines - used by all the drivers.
+ *
+ * These are based on the LPC1768 pinMode, digitalRead & digitalWrite routines.
+ *
+ * Couldn't just call exact copies because the overhead killed the LCD update speed
+ * With an intermediate level the softspi was running in the 10-20kHz range which
+ * resulted in using about about 25% of the CPU's time.
+ */
+
+#if defined(TARGET_LPC1768)
+
+ #include
+ #include
+ #include "src/core/macros.h"
+// #include "pinmapping.h"
+
+ #define LPC_PORT_OFFSET (0x0020)
+ #define LPC_PIN(pin) (1UL << pin)
+ #define LPC_GPIO(port) ((volatile LPC_GPIO_TypeDef *)(LPC_GPIO0_BASE + LPC_PORT_OFFSET * port))
+
+ #define INPUT 0
+ #define OUTPUT 1
+ #define INPUT_PULLUP 2
+
+
+uint8_t LPC1768_PIN_PORT(const uint8_t pin);
+uint8_t LPC1768_PIN_PIN(const uint8_t pin);
+
+ #ifdef __cplusplus
+ extern "C" {
+ #endif
+
+// IO functions
+// As defined by Arduino INPUT(0x0), OUPUT(0x1), INPUT_PULLUP(0x2)
+void pinMode_LCD(uint8_t pin, uint8_t mode) {
+#define LPC1768_PIN_PORT(pin) ((uint8_t)((pin >> 5) & 0b111))
+#define LPC1768_PIN_PIN(pin) ((uint8_t)(pin & 0b11111))
+ PINSEL_CFG_Type config = { LPC1768_PIN_PORT(pin),
+ LPC1768_PIN_PIN(pin),
+ PINSEL_FUNC_0,
+ PINSEL_PINMODE_TRISTATE,
+ PINSEL_PINMODE_NORMAL };
+ switch(mode) {
+ case INPUT:
+ LPC_GPIO(LPC1768_PIN_PORT(pin))->FIODIR &= ~LPC_PIN(LPC1768_PIN_PIN(pin));
+ PINSEL_ConfigPin(&config);
+ break;
+ case OUTPUT:
+ LPC_GPIO(LPC1768_PIN_PORT(pin))->FIODIR |= LPC_PIN(LPC1768_PIN_PIN(pin));
+ PINSEL_ConfigPin(&config);
+ break;
+ case INPUT_PULLUP:
+ LPC_GPIO(LPC1768_PIN_PORT(pin))->FIODIR &= ~LPC_PIN(LPC1768_PIN_PIN(pin));
+ config.Pinmode = PINSEL_PINMODE_PULLUP;
+ PINSEL_ConfigPin(&config);
+ break;
+ default:
+ break;
+ }
+}
+
+
+ void u8g_SetPinOutput(uint8_t internal_pin_number) {
+ pinMode_LCD(internal_pin_number, 1); // OUTPUT
+ }
+
+ void u8g_SetPinInput(uint8_t internal_pin_number) {
+ pinMode_LCD(internal_pin_number, 0); // INPUT
+ }
+
+
+
+ void u8g_SetPinLevel(uint8_t pin, uint8_t pin_status) {
+#define LPC1768_PIN_PORT(pin) ((uint8_t)((pin >> 5) & 0b111))
+#define LPC1768_PIN_PIN(pin) ((uint8_t)(pin & 0b11111))
+ if (pin_status)
+ LPC_GPIO(LPC1768_PIN_PORT(pin))->FIOSET = LPC_PIN(LPC1768_PIN_PIN(pin));
+ else
+ LPC_GPIO(LPC1768_PIN_PORT(pin))->FIOCLR = LPC_PIN(LPC1768_PIN_PIN(pin));
+ }
+
+ uint8_t u8g_GetPinLevel(uint8_t pin) {
+#define LPC1768_PIN_PORT(pin) ((uint8_t)((pin >> 5) & 0b111))
+#define LPC1768_PIN_PIN(pin) ((uint8_t)(pin & 0b11111))
+ return (uint32_t)LPC_GPIO(LPC1768_PIN_PORT(pin))->FIOPIN & LPC_PIN(LPC1768_PIN_PIN(pin)) ? 1 : 0;
+ }
+
+
+ #ifdef __cplusplus
+ }
+ #endif
+
+#endif
diff --git a/Marlin/src/HAL/HAL_LPC1768/HAL_LCD_pin_routines.h b/Marlin/src/HAL/HAL_LPC1768/HAL_LCD_pin_routines.h
new file mode 100644
index 0000000000..eb4cb2e5e8
--- /dev/null
+++ b/Marlin/src/HAL/HAL_LPC1768/HAL_LCD_pin_routines.h
@@ -0,0 +1,47 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+/**
+ * Low level pin manipulation routines - used by all the drivers.
+ *
+ * These are based on the LPC1768 pinMode, digitalRead & digitalWrite routines.
+ *
+ * Couldn't just call exact copies because the overhead killed the LCD update speed
+ * With an intermediate level the softspi was running in the 10-20kHz range which
+ * resulted in using about about 25% of the CPU's time.
+ */
+
+
+
+
+
+void u8g_SetPinOutput(uint8_t internal_pin_number);
+
+void u8g_SetPinInput(uint8_t internal_pin_number);
+
+void u8g_SetPinLevel(uint8_t pin, uint8_t pin_status);
+
+uint8_t u8g_GetPinLevel(uint8_t pin);
+
+
+
+
diff --git a/Marlin/src/HAL/HAL_LPC1768/HAL_LPC1768_LCD_defines.h b/Marlin/src/HAL/HAL_LPC1768/HAL_LPC1768_LCD_defines.h
new file mode 100644
index 0000000000..ddc0c6bf49
--- /dev/null
+++ b/Marlin/src/HAL/HAL_LPC1768/HAL_LPC1768_LCD_defines.h
@@ -0,0 +1,58 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+/**
+* LPC1768 LCD specific defines
+*/
+
+#if defined(TARGET_LPC1768)
+
+ // pointers to low level routines - must always supply these
+// #define U8G_HAL_LINKS
+ #define HAL_LCD_pin_routines "HAL_LPC1768/HAL_LCD_pin_routines.h"
+ #define HAL_LCD_I2C_routines "HAL_LPC1768/HAL_LCD_I2C_routines.h"
+ #define HAL_LCD_delay "HAL_LPC1768/HAL_LCD_delay.h"
+
+ // The following are optional depending on the platform.
+
+ // definitions of HAL specific com and device drivers.
+ uint8_t u8g_com_HAL_LPC1768_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
+ uint8_t u8g_com_HAL_LPC1768_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
+ uint8_t u8g_com_HAL_LPC1768_ST7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
+ uint8_t u8g_com_HAL_LPC1768_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
+ uint8_t u8g_com_HAL_LPC1768_ssd_hw_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
+
+
+ // connect U8g com generic com names to the desired driver
+ #define U8G_COM_HW_SPI u8g_com_HAL_LPC1768_hw_spi_fn // use LPC1768 specific hardware SPI routine
+ #define U8G_COM_SW_SPI u8g_com_HAL_LPC1768_sw_spi_fn // use LPC1768 specific software SPI routine
+ #define U8G_COM_ST7920_HW_SPI u8g_com_HAL_LPC1768_ST7920_hw_spi_fn
+ #define U8G_COM_ST7920_SW_SPI u8g_com_HAL_LPC1768_ST7920_sw_spi_fn
+ #define U8G_COM_SSD_I2C u8g_com_HAL_LPC1768_ssd_hw_i2c_fn
+
+ // let these default for now
+ #define U8G_COM_PARALLEL u8g_com_null_fn
+ #define U8G_COM_T6963 u8g_com_null_fn
+ #define U8G_COM_FAST_PARALLEL u8g_com_null_fn
+ #define U8G_COM_UC_I2C u8g_com_null_fn
+
+#endif
diff --git a/Marlin/src/HAL/HAL_LPC1768/HAL_spi.cpp b/Marlin/src/HAL/HAL_LPC1768/HAL_spi.cpp
index 1d65a92034..1e28145348 100644
--- a/Marlin/src/HAL/HAL_LPC1768/HAL_spi.cpp
+++ b/Marlin/src/HAL/HAL_LPC1768/HAL_spi.cpp
@@ -104,14 +104,14 @@
else if (SPI_speed == 1) { // medium - about 1 MHz
for (int bits = 0; bits < 8; bits++) {
if (b & 0x80) {
- for (uint8_t i = 0; i < 8; i++) WRITE(MOSI_PIN, HIGH);
+ for (uint8_t i = 0; i < 9; i++) WRITE(MOSI_PIN, HIGH);
}
else {
- for (uint8_t i = 0; i < 8; i++) WRITE(MOSI_PIN, LOW);
+ for (uint8_t i = 0; i < 9; i++) WRITE(MOSI_PIN, LOW);
}
b <<= 1;
- for (uint8_t i = 0; i < 6; i++) WRITE(SCK_PIN, HIGH);
+ for (uint8_t i = 0; i < 7; i++) WRITE(SCK_PIN, HIGH);
if (READ(MISO_PIN)) {
b |= 1;
diff --git a/Marlin/src/HAL/HAL_LPC1768/HAL_temp.h b/Marlin/src/HAL/HAL_LPC1768/HAL_temp.h
new file mode 100644
index 0000000000..20d2cf8d05
--- /dev/null
+++ b/Marlin/src/HAL/HAL_LPC1768/HAL_temp.h
@@ -0,0 +1 @@
+// blank file needed until I get platformio to update it's copy of U8Glib-HAL
\ No newline at end of file
diff --git a/Marlin/src/HAL/HAL_LPC1768/u8g_com_HAL_LPC1768_hw_spi.cpp b/Marlin/src/HAL/HAL_LPC1768/u8g_com_HAL_LPC1768_hw_spi.cpp
new file mode 100644
index 0000000000..93974ac9c8
--- /dev/null
+++ b/Marlin/src/HAL/HAL_LPC1768/u8g_com_HAL_LPC1768_hw_spi.cpp
@@ -0,0 +1,146 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+
+/*
+
+ based on u8g_com_msp430_hw_spi.c
+
+ Universal 8bit Graphics Library
+
+ Copyright (c) 2012, olikraus@gmail.com
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without modification,
+ are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice, this list
+ of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or other
+ materials provided with the distribution.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*/
+
+
+#ifdef TARGET_LPC1768
+
+// #include
+
+// #include "src/core/macros.h"
+// #include "Configuration.h"
+
+ #include
+
+ #define SPI_FULL_SPEED 0
+ #define SPI_HALF_SPEED 1
+ #define SPI_QUARTER_SPEED 2
+ #define SPI_EIGHTH_SPEED 3
+ #define SPI_SIXTEENTH_SPEED 4
+ #define SPI_SPEED_5 5
+ #define SPI_SPEED_6 6
+
+ void spiBegin();
+ void spiInit(uint8_t spiRate);
+ void spiSend(uint8_t b);
+ void spiSend(const uint8_t* buf, size_t n);
+
+
+ uint8_t u8g_com_HAL_LPC1768_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+ {
+ switch(msg)
+ {
+ case U8G_COM_MSG_STOP:
+ break;
+
+ case U8G_COM_MSG_INIT:
+ u8g_SetPILevel(u8g, U8G_PI_CS, 1);
+ u8g_SetPILevel(u8g, U8G_PI_A0, 1);
+ u8g_SetPILevel(u8g, U8G_PI_RESET, 1);
+ u8g_SetPIOutput(u8g, U8G_PI_CS);
+ u8g_SetPIOutput(u8g, U8G_PI_A0);
+ u8g_SetPIOutput(u8g, U8G_PI_RESET);
+ u8g_Delay(5);
+ spiBegin();
+ #ifndef SPI_SPEED
+ #define SPI_SPEED SPI_FULL_SPEED // use same SPI speed as SD card
+ #endif
+ spiInit(SPI_SPEED);
+ break;
+
+ case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
+ u8g_SetPILevel(u8g, U8G_PI_A0, arg_val);
+ break;
+
+ case U8G_COM_MSG_CHIP_SELECT:
+ u8g_SetPILevel(u8g, U8G_PI_CS, (arg_val ? 0 : 1));
+ break;
+
+ case U8G_COM_MSG_RESET:
+ u8g_SetPILevel(u8g, U8G_PI_RESET, arg_val);
+ break;
+
+ case U8G_COM_MSG_WRITE_BYTE:
+ spiSend((uint8_t)arg_val);
+ break;
+
+ case U8G_COM_MSG_WRITE_SEQ:
+ {
+ uint8_t *ptr = (uint8_t*) arg_ptr;
+ while( arg_val > 0 )
+ {
+ spiSend(*ptr++);
+ arg_val--;
+ }
+ }
+ break;
+
+ case U8G_COM_MSG_WRITE_SEQ_P:
+ {
+ uint8_t *ptr = (uint8_t*) arg_ptr;
+ while( arg_val > 0 )
+ {
+ spiSend(*ptr++);
+ arg_val--;
+ }
+ }
+ break;
+ }
+ return 1;
+ }
+
+#endif //TARGET_LPC1768
diff --git a/Marlin/src/HAL/HAL_LPC1768/u8g_com_HAL_LPC1768_ssd_hw_i2c.cpp b/Marlin/src/HAL/HAL_LPC1768/u8g_com_HAL_LPC1768_ssd_hw_i2c.cpp
new file mode 100644
index 0000000000..ce5ac199f6
--- /dev/null
+++ b/Marlin/src/HAL/HAL_LPC1768/u8g_com_HAL_LPC1768_ssd_hw_i2c.cpp
@@ -0,0 +1,204 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+
+/*
+
+ based on u8g_com_arduino_ssd_i2c.c
+
+ com interface for arduino (AND atmega) and the SSDxxxx chip (SOLOMON) variant
+ I2C protocol
+
+ ToDo: Rename this to u8g_com_avr_ssd_i2c.c
+
+ Universal 8bit Graphics Library
+
+ Copyright (c) 2012, olikraus@gmail.com
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without modification,
+ are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice, this list
+ of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or other
+ materials provided with the distribution.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ Special pin usage:
+ U8G_PI_I2C_OPTION additional options
+ U8G_PI_A0_STATE used to store the last value of the command/data register selection
+ U8G_PI_SET_A0 1: Signal request to update I2C device with new A0_STATE, 0: Do nothing, A0_STATE matches I2C device
+ U8G_PI_SCL clock line (NOT USED)
+ U8G_PI_SDA data line (NOT USED)
+
+ U8G_PI_RESET reset line (currently disabled, see below)
+
+ Protocol:
+ SLA, Cmd/Data Selection, Arguments
+ The command/data register is selected by a special instruction byte, which is sent after SLA
+
+ The continue bit is always 0 so that a (re)start is equired for the change from cmd to/data mode
+*/
+
+#ifdef TARGET_LPC1768
+
+ #include
+
+ #define I2C_SLA (0x3c*2)
+ //#define I2C_CMD_MODE 0x080
+ #define I2C_CMD_MODE 0x000
+ #define I2C_DATA_MODE 0x040
+
+// #define U8G_I2C_OPT_FAST 16
+
+ uint8_t u8g_com_ssd_I2C_start_sequence(u8g_t *u8g)
+ {
+ /* are we requested to set the a0 state? */
+ if ( u8g->pin_list[U8G_PI_SET_A0] == 0 )
+ return 1;
+
+ /* setup bus, might be a repeated start */
+ if ( u8g_i2c_start(I2C_SLA) == 0 )
+ return 0;
+ if ( u8g->pin_list[U8G_PI_A0_STATE] == 0 )
+ {
+ if ( u8g_i2c_send_byte(I2C_CMD_MODE) == 0 )
+ return 0;
+ }
+ else
+ {
+ if ( u8g_i2c_send_byte(I2C_DATA_MODE) == 0 )
+ return 0;
+ }
+
+ u8g->pin_list[U8G_PI_SET_A0] = 0;
+ return 1;
+ }
+
+ uint8_t u8g_com_HAL_LPC1768_ssd_hw_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+ {
+ switch(msg)
+ {
+ case U8G_COM_MSG_INIT:
+ //u8g_com_arduino_digital_write(u8g, U8G_PI_SCL, HIGH);
+ //u8g_com_arduino_digital_write(u8g, U8G_PI_SDA, HIGH);
+ //u8g->pin_list[U8G_PI_A0_STATE] = 0; /* inital RS state: unknown mode */
+
+ u8g_i2c_init(u8g->pin_list[U8G_PI_I2C_OPTION]);
+ u8g_com_ssd_I2C_start_sequence(u8g);
+ break;
+
+ case U8G_COM_MSG_STOP:
+ break;
+
+ case U8G_COM_MSG_RESET:
+ /* Currently disabled, but it could be enable. Previous restrictions have been removed */
+ /* u8g_com_arduino_digital_write(u8g, U8G_PI_RESET, arg_val); */
+ break;
+
+ case U8G_COM_MSG_CHIP_SELECT:
+ u8g->pin_list[U8G_PI_A0_STATE] = 0;
+ u8g->pin_list[U8G_PI_SET_A0] = 1; /* force a0 to set again, also forces start condition */
+ if ( arg_val == 0 )
+ {
+ /* disable chip, send stop condition */
+ u8g_i2c_stop();
+ }
+ else
+ {
+ /* enable, do nothing: any byte writing will trigger the i2c start */
+ }
+ break;
+
+ case U8G_COM_MSG_WRITE_BYTE:
+ //u8g->pin_list[U8G_PI_SET_A0] = 1;
+// if ( u8g_com_arduino_ssd_start_sequence(u8g) == 0 )
+// return u8g_i2c_stop(), 0;
+ if ( u8g_i2c_send_byte(arg_val) == 0 )
+ return u8g_i2c_stop(), 0;
+ // u8g_i2c_stop();
+ break;
+
+ case U8G_COM_MSG_WRITE_SEQ:
+ //u8g->pin_list[U8G_PI_SET_A0] = 1;
+ if ( u8g_com_ssd_I2C_start_sequence(u8g) == 0 )
+ return u8g_i2c_stop(), 0;
+ {
+ register uint8_t *ptr = (uint8_t *)arg_ptr;
+ while( arg_val > 0 )
+ {
+ if ( u8g_i2c_send_byte(*ptr++) == 0 )
+ return u8g_i2c_stop(), 0;
+ arg_val--;
+ }
+ }
+ // u8g_i2c_stop();
+ break;
+
+ case U8G_COM_MSG_WRITE_SEQ_P:
+ //u8g->pin_list[U8G_PI_SET_A0] = 1;
+ if ( u8g_com_ssd_I2C_start_sequence(u8g) == 0 )
+ return u8g_i2c_stop(), 0;
+ {
+ register uint8_t *ptr = (uint8_t *)arg_ptr;
+ while( arg_val > 0 )
+ {
+ if ( u8g_i2c_send_byte(u8g_pgm_read(ptr)) == 0 )
+ return 0;
+ ptr++;
+ arg_val--;
+ }
+ }
+ // u8g_i2c_stop();
+ break;
+
+ case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
+ u8g->pin_list[U8G_PI_A0_STATE] = arg_val;
+ u8g->pin_list[U8G_PI_SET_A0] = 1; /* force a0 to set again */
+
+ u8g_i2c_start(0); // send slave address and write bit
+ if (arg_val)
+ u8g_i2c_send_byte(0x40); // write to graphics DRAM mode
+ else
+ u8g_i2c_send_byte(0x80); //command mode
+ break;
+ }
+ return 1;
+ }
+
+#endif // TARGET_LPC1768
diff --git a/Marlin/src/HAL/HAL_LPC1768/u8g_com_HAL_LPC1768_ssd_sw_i2c.cpp under construction b/Marlin/src/HAL/HAL_LPC1768/u8g_com_HAL_LPC1768_ssd_sw_i2c.cpp under construction
new file mode 100644
index 0000000000..11fd77f7c4
--- /dev/null
+++ b/Marlin/src/HAL/HAL_LPC1768/u8g_com_HAL_LPC1768_ssd_sw_i2c.cpp under construction
@@ -0,0 +1,283 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+/* based on U8G2 code
+
+ u8x8_byte.c
+
+ Universal 8bit Graphics Library (https://github.com/olikraus/u8g2/)
+
+ Copyright (c) 2016, olikraus@gmail.com
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without modification,
+ are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice, this list
+ of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or other
+ materials provided with the distribution.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+*/
+
+/*
+ software i2c,
+ ignores ACK response (which is anyway not provided by some displays)
+ also does not allow reading from the device
+*/
+
+#ifdef TARGET_LPC1768
+
+ #include
+
+void delayMicroseconds(uint32_t us);
+//void pinMode(int16_t pin, uint8_t mode);
+//void digitalWrite(int16_t pin, uint8_t pin_status);
+
+
+ #define I2C_SLA (0x3c*2)
+ //#define I2C_CMD_MODE 0x080
+ #define I2C_CMD_MODE 0x000
+ #define I2C_DATA_MODE 0x040
+
+//static uint8_t I2C_speed; // 3 - 400KHz, 13 - 100KHz
+//#define SPEED_400KHz 3
+//#define SPEED_100KHz 13
+
+
+// #define U8G_I2C_OPT_FAST 16
+
+
+
+uint8_t SCL_pin_HAL_LPC1768_sw_I2C, SCL_port_HAL_LPC1768_sw_I2C, SDA_pin_HAL_LPC1768_sw_I2C, SDA_port_HAL_LPC1768_sw_I2C;
+
+#define SPI_SPEED 2 //20: 200KHz 5:750KHz 2:3-4MHz
+
+uint8_t u8g_i2c_send_byte_sw(uint8_t data) {
+{
+ for (uint8_t i = 0; i < 9; i++) { // 1 extra bit for the ack/nak
+
+ if (val & 0x80)
+ for (uint8_t j = 0; j < SPI_SPEED; j++) {
+ LPC_GPIO(SDA_port_HAL_LPC1768_sw_I2C)->FIOSET = LPC_PIN(SDA_pin_HAL_LPC1768_sw_I2C);
+ LPC_GPIO(SDA_port_HAL_LPC1768_sw_I2C)->FIOSET = LPC_PIN(SDA_pin_HAL_LPC1768_sw_I2C);
+ LPC_GPIO(SDA_port_HAL_LPC1768_sw_I2C)->FIOSET = LPC_PIN(SDA_pin_HAL_LPC1768_sw_I2C);
+ }
+ else
+ for (uint8_t j = 0; j < SPI_SPEED; j++) {
+ LPC_GPIO(SDA_port_HAL_LPC1768_sw_I2C)->FIOCLR = LPC_PIN(SDA_pin_HAL_LPC1768_sw_I2C);
+ LPC_GPIO(SDA_port_HAL_LPC1768_sw_I2C)->FIOCLR = LPC_PIN(SDA_pin_HAL_LPC1768_sw_I2C);
+ LPC_GPIO(SDA_port_HAL_LPC1768_sw_I2C)->FIOCLR = LPC_PIN(SDA_pin_HAL_LPC1768_sw_I2C);
+ }
+
+ for (uint8_t j = 0; j < SPI_SPEED; j++) {
+ LPC_GPIO(SCL_port_HAL_LPC1768_sw_I2C)->FIOSET = LPC_PIN(SCL_pin_HAL_LPC1768_sw_I2C);
+ LPC_GPIO(SCL_port_HAL_LPC1768_sw_I2C)->FIOSET = LPC_PIN(SCL_pin_HAL_LPC1768_sw_I2C);
+ LPC_GPIO(SCL_port_HAL_LPC1768_sw_I2C)->FIOSET = LPC_PIN(SCL_pin_HAL_LPC1768_sw_I2C);
+ LPC_GPIO(SCL_port_HAL_LPC1768_sw_I2C)->FIOSET = LPC_PIN(SCL_pin_HAL_LPC1768_sw_I2C);
+ LPC_GPIO(SCL_port_HAL_LPC1768_sw_I2C)->FIOSET = LPC_PIN(SCL_pin_HAL_LPC1768_sw_I2C);
+ }
+
+ for (uint8_t j = 0; j < SPI_SPEED; j++) {
+ LPC_GPIO(SCL_port_HAL_LPC1768_sw_I2C)->FIOCLR = LPC_PIN(SCL_pin_HAL_LPC1768_sw_I2C);
+ LPC_GPIO(SCL_port_HAL_LPC1768_sw_I2C)->FIOCLR = LPC_PIN(SCL_pin_HAL_LPC1768_sw_I2C);
+ }
+ val = val << 1;
+ }
+ return 1;
+}
+
+
+uint8_t u8g_i2c_start_sw(uint8_t sla) { // assert start condition and then send slave address with write bit
+{
+ /* send the start condition, both lines go from 1 to 0 */
+
+ LPC_GPIO(SDA_port_HAL_LPC1768_sw_I2C)->FIOCLR = LPC_PIN(SDA_pin_HAL_LPC1768_sw_I2C);
+ LPC_GPIO(SCL_port_HAL_LPC1768_sw_I2C)->FIOCLR = LPC_PIN(SCL_pin_HAL_LPC1768_sw_I2C);
+ delayMicroseconds(2);
+ LPC_GPIO(SCL_port_HAL_LPC1768_sw_I2C)->FIOSET = LPC_PIN(SCL_pin_HAL_LPC1768_sw_I2C);
+ delayMicroseconds(2);
+ LPC_GPIO(SDA_port_HAL_LPC1768_sw_I2C)->FIOSET = LPC_PIN(SDA_pin_HAL_LPC1768_sw_I2C);
+ delayMicroseconds(2);
+ LPC_GPIO(SDA_port_HAL_LPC1768_sw_I2C)->FIOCLR = LPC_PIN(SDA_pin_HAL_LPC1768_sw_I2C);
+ delayMicroseconds(2);
+ LPC_GPIO(SCL_port_HAL_LPC1768_sw_I2C)->FIOCLR = LPC_PIN(SCL_pin_HAL_LPC1768_sw_I2C);
+
+ u8g_i2c_send_byte_sw(I2C_SLA); // send slave address with write bit
+}
+
+
+void u8g_i2c_stop_sw(void) {
+}
+
+void u8g_i2c_init_sw(uint8_t clock_option) {
+ u8g_i2c_start(0); // send slave address and write bit
+}
+
+
+
+ uint8_t u8g_com_ssd_I2C_start_sequence_sw(u8g_t *u8g)
+ {
+ /* are we requested to set the a0 state? */
+ if ( u8g->pin_list[U8G_PI_SET_A0] == 0 )
+ return 1;
+
+ /* setup bus, might be a repeated start */
+ if ( u8g_i2c_start(I2C_SLA) == 0 )
+ return 0;
+ if ( u8g->pin_list[U8G_PI_A0_STATE] == 0 )
+ {
+ if ( u8g_i2c_send_byte(I2C_CMD_MODE) == 0 )
+ return 0;
+ }
+ else
+ {
+ if ( u8g_i2c_send_byte(I2C_DATA_MODE) == 0 )
+ return 0;
+ }
+
+ u8g->pin_list[U8G_PI_SET_A0] = 0;
+ return 1;
+ }
+
+ uint8_t u8g_com_HAL_LPC1768_ssd_sw_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+ {
+ switch(msg)
+ {
+ case U8G_COM_MSG_INIT:
+
+ #define LPC1768_PIN_PORT(pin) ((uint8_t)((pin >> 5) & 0b111))
+ #define LPC1768_PIN_PIN(pin) ((uint8_t)(pin & 0b11111))
+ SCL_pin_HAL_LPC1768_sw_I2C = LPC1768_PIN_PIN(u8g->pin_list[U8G_PI_SCL]);
+ SCL_port_HAL_LPC1768_sw_I2C = LPC1768_PIN_PORT(u8g->pin_list[U8G_PI_SCL]);
+ SDA_pin_HAL_LPC1768_sw_I2C = LPC1768_PIN_PIN(u8g->pin_list[U8G_PI_SDA]);
+ SDA_port_HAL_LPC1768_sw_I2C = LPC1768_PIN_PORT(u8g->pin_list[U8G_PI_SDA]);
+ // As defined by Arduino INPUT(0x0), OUPUT(0x1), INPUT_PULLUP(0x2)
+ #define OUPUT 0x1
+ u8g_SetPIOutput(u8g, U8G_PI_SCL);
+ u8g_SetPIOutput(u8g, U8G_PI_SDA);
+ if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_CS]) u8g_SetPIOutput(u8g, U8G_PI_CS);
+ if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_A0]) u8g_SetPIOutput(u8g, U8G_PI_A0);
+ if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_RESET]) u8g_SetPIOutput(u8g, U8G_PI_RESET);
+
+ //u8g_com_arduino_digital_write(u8g, U8G_PI_SCL, HIGH);
+ //u8g_com_arduino_digital_write(u8g, U8G_PI_SDA, HIGH);
+ //u8g->pin_list[U8G_PI_A0_STATE] = 0; /* inital RS state: unknown mode */
+
+ u8g_i2c_init_sw(u8g->pin_list[U8G_PI_I2C_OPTION]);
+ u8g_com_ssd_I2C_start_sequence_sw((u8g);
+ break;
+
+ case U8G_COM_MSG_STOP:
+ break;
+
+ case U8G_COM_MSG_RESET:
+ break;
+
+ case U8G_COM_MSG_CHIP_SELECT:
+ u8g->pin_list[U8G_PI_A0_STATE] = 0;
+ u8g->pin_list[U8G_PI_SET_A0] = 1; /* force a0 to set again, also forces start condition */
+ if ( arg_val == 0 )
+ {
+ /* disable chip, send stop condition */
+ u8g_i2c_stop_sw();
+ }
+ else
+ {
+ /* enable, do nothing: any byte writing will trigger the i2c start */
+ }
+ break;
+
+ case U8G_COM_MSG_WRITE_BYTE:
+ //u8g->pin_list[U8G_PI_SET_A0] = 1;
+// if ( u8g_com_arduino_ssd_start_sequence(u8g) == 0 )
+// return u8g_i2c_stop(), 0;
+ if ( u8g_i2c_send_byte_sw(arg_val) == 0 )
+ return u8g_i2c_stop_sw(), 0;
+ // u8g_i2c_stop();
+ break;
+
+ case U8G_COM_MSG_WRITE_SEQ:
+ //u8g->pin_list[U8G_PI_SET_A0] = 1;
+ if ( u8g_com_ssd_I2C_start_sequence_sw(u8g) == 0 )
+ return u8g_i2c_stop_sw(), 0;
+ {
+ register uint8_t *ptr = (uint8_t *)arg_ptr;
+ while( arg_val > 0 )
+ {
+ if ( u8g_i2c_send_byte_sw(*ptr++) == 0 )
+ return u8g_i2c_stop_sw(), 0;
+ arg_val--;
+ }
+ }
+ // u8g_i2c_stop();
+ break;
+
+ case U8G_COM_MSG_WRITE_SEQ_P:
+ //u8g->pin_list[U8G_PI_SET_A0] = 1;
+ if ( u8g_com_ssd_I2C_start_sequence_sw(u8g) == 0 )
+ return u8g_i2c_stop_sw(), 0;
+ {
+ register uint8_t *ptr = (uint8_t *)arg_ptr;
+ while( arg_val > 0 )
+ {
+ if ( u8g_i2c_send_byte_sw(u8g_pgm_read(ptr)) == 0 )
+ return 0;
+ ptr++;
+ arg_val--;
+ }
+ }
+ // u8g_i2c_stop();
+ break;
+
+ case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
+ u8g->pin_list[U8G_PI_A0_STATE] = arg_val;
+ u8g->pin_list[U8G_PI_SET_A0] = 1; /* force a0 to set again */
+
+ u8g_i2c_start_sw(0); // send slave address and write bit
+ if (arg_val)
+ u8g_i2c_send_byte_sw(0x40); // write to graphics DRAM mode
+ else
+ u8g_i2c_send_byte_sw(0x80); //command mode
+ break;
+ }
+ return 1;
+ }
+
+#endif // TARGET_LPC1768
diff --git a/Marlin/src/HAL/HAL_LPC1768/u8g_com_HAL_LPC1768_st7920_hw_spi.cpp b/Marlin/src/HAL/HAL_LPC1768/u8g_com_HAL_LPC1768_st7920_hw_spi.cpp
new file mode 100644
index 0000000000..f9b0890f78
--- /dev/null
+++ b/Marlin/src/HAL/HAL_LPC1768/u8g_com_HAL_LPC1768_st7920_hw_spi.cpp
@@ -0,0 +1,164 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+/*
+
+ based on u8g_com_LPC1768_st7920_hw_spi.c
+
+ Universal 8bit Graphics Library
+
+ Copyright (c) 2011, olikraus@gmail.com
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without modification,
+ are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice, this list
+ of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or other
+ materials provided with the distribution.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*/
+
+#ifdef TARGET_LPC1768
+
+// #include
+
+// #include "src/core/macros.h"
+// #include "Configuration.h"
+
+ #include
+
+ #define SPI_FULL_SPEED 0
+ #define SPI_HALF_SPEED 1
+ #define SPI_QUARTER_SPEED 2
+ #define SPI_EIGHTH_SPEED 3
+ #define SPI_SIXTEENTH_SPEED 4
+ #define SPI_SPEED_5 5
+ #define SPI_SPEED_6 6
+
+
+ void spiBegin();
+ void spiInit(uint8_t spiRate);
+ void spiSend(uint8_t b);
+ void spiSend(const uint8_t* buf, size_t n);
+
+
+ static uint8_t rs_last_state = 255;
+
+ static void u8g_com_LPC1768_st7920_write_byte_hw_spi(uint8_t rs, uint8_t val)
+ {
+ uint8_t i;
+
+ if ( rs != rs_last_state) { // time to send a command/data byte
+ rs_last_state = rs;
+
+ if ( rs == 0 )
+ /* command */
+ spiSend(0x0f8);
+ else
+ /* data */
+ spiSend(0x0fa);
+
+ for( i = 0; i < 4; i++ ) // give the controller some time to process the data
+ u8g_10MicroDelay(); // 2 is bad, 3 is OK, 4 is safe
+ }
+
+ spiSend(val & 0x0f0);
+ spiSend(val << 4);
+ }
+
+
+ uint8_t u8g_com_HAL_LPC1768_ST7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+ {
+ switch(msg)
+ {
+ case U8G_COM_MSG_INIT:
+ u8g_SetPILevel(u8g, U8G_PI_CS, 0);
+ u8g_SetPIOutput(u8g, U8G_PI_CS);
+ u8g_Delay(5);
+ spiBegin();
+ spiInit(SPI_EIGHTH_SPEED); // ST7920 max speed is about 1.1 MHz
+ u8g->pin_list[U8G_PI_A0_STATE] = 0; /* inital RS state: command mode */
+ break;
+
+ case U8G_COM_MSG_STOP:
+ break;
+
+ case U8G_COM_MSG_RESET:
+ u8g_SetPILevel(u8g, U8G_PI_RESET, arg_val);
+ break;
+
+ case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
+ u8g->pin_list[U8G_PI_A0_STATE] = arg_val;
+ break;
+
+ case U8G_COM_MSG_CHIP_SELECT:
+ u8g_SetPILevel(u8g, U8G_PI_CS, arg_val); //note: the st7920 has an active high chip select
+ break;
+
+ case U8G_COM_MSG_WRITE_BYTE:
+ u8g_com_LPC1768_st7920_write_byte_hw_spi(u8g->pin_list[U8G_PI_A0_STATE], arg_val);
+ break;
+
+ case U8G_COM_MSG_WRITE_SEQ:
+ {
+ uint8_t *ptr = (uint8_t*) arg_ptr;
+ while( arg_val > 0 )
+ {
+ u8g_com_LPC1768_st7920_write_byte_hw_spi(u8g->pin_list[U8G_PI_A0_STATE], *ptr++);
+ arg_val--;
+ }
+ }
+ break;
+
+ case U8G_COM_MSG_WRITE_SEQ_P:
+ {
+ uint8_t *ptr = (uint8_t*) arg_ptr;
+ while( arg_val > 0 )
+ {
+ u8g_com_LPC1768_st7920_write_byte_hw_spi(u8g->pin_list[U8G_PI_A0_STATE], *ptr++);
+ arg_val--;
+ }
+ }
+ break;
+ }
+ return 1;
+ }
+
+#endif // TARGET_LPC1768
diff --git a/Marlin/src/HAL/HAL_LPC1768/u8g_com_HAL_LPC1768_st7920_sw_spi.cpp b/Marlin/src/HAL/HAL_LPC1768/u8g_com_HAL_LPC1768_st7920_sw_spi.cpp
new file mode 100644
index 0000000000..47a4f443f2
--- /dev/null
+++ b/Marlin/src/HAL/HAL_LPC1768/u8g_com_HAL_LPC1768_st7920_sw_spi.cpp
@@ -0,0 +1,198 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+/*
+
+ based on u8g_com_st7920_hw_spi.c
+
+ Universal 8bit Graphics Library
+
+ Copyright (c) 2011, olikraus@gmail.com
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without modification,
+ are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice, this list
+ of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or other
+ materials provided with the distribution.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*/
+
+#ifdef TARGET_LPC1768
+
+ #include
+
+ #include
+
+ #define LPC_PORT_OFFSET (0x0020)
+ #define LPC_PIN(pin) (1UL << pin)
+ #define LPC_GPIO(port) ((volatile LPC_GPIO_TypeDef *)(LPC_GPIO0_BASE + LPC_PORT_OFFSET * port))
+
+
+ uint8_t SCK_pin_ST7920_HAL, SCK_port_ST7920_HAL, MOSI_pin_ST7920_HAL_HAL, MOSI_port_ST7920_HAL;
+
+
+ #define SPI_SPEED 4 //20: 200KHz 5:750KHz 4:1MHz 3:1.5MHz 2:3-4MHz
+
+ static void spiSend_sw(uint8_t val)
+ {
+ for (uint8_t i = 0; i < 8; i++) {
+
+ if (val & 0x80)
+ for (uint8_t j = 0; j < SPI_SPEED; j++) {
+ LPC_GPIO(MOSI_port_ST7920_HAL)->FIOSET = LPC_PIN(MOSI_pin_ST7920_HAL_HAL);
+ LPC_GPIO(MOSI_port_ST7920_HAL)->FIOSET = LPC_PIN(MOSI_pin_ST7920_HAL_HAL);
+ LPC_GPIO(MOSI_port_ST7920_HAL)->FIOSET = LPC_PIN(MOSI_pin_ST7920_HAL_HAL);
+ }
+ else
+ for (uint8_t j = 0; j < SPI_SPEED; j++) {
+ LPC_GPIO(MOSI_port_ST7920_HAL)->FIOCLR = LPC_PIN(MOSI_pin_ST7920_HAL_HAL);
+ LPC_GPIO(MOSI_port_ST7920_HAL)->FIOCLR = LPC_PIN(MOSI_pin_ST7920_HAL_HAL);
+ LPC_GPIO(MOSI_port_ST7920_HAL)->FIOCLR = LPC_PIN(MOSI_pin_ST7920_HAL_HAL);
+ }
+
+ for (uint8_t j = 0; j < SPI_SPEED; j++) {
+ LPC_GPIO(SCK_port_ST7920_HAL)->FIOSET = LPC_PIN(SCK_pin_ST7920_HAL);
+ LPC_GPIO(SCK_port_ST7920_HAL)->FIOSET = LPC_PIN(SCK_pin_ST7920_HAL);
+ LPC_GPIO(SCK_port_ST7920_HAL)->FIOSET = LPC_PIN(SCK_pin_ST7920_HAL);
+ LPC_GPIO(SCK_port_ST7920_HAL)->FIOSET = LPC_PIN(SCK_pin_ST7920_HAL);
+ LPC_GPIO(SCK_port_ST7920_HAL)->FIOSET = LPC_PIN(SCK_pin_ST7920_HAL);
+ }
+
+ for (uint8_t j = 0; j < SPI_SPEED; j++) {
+ LPC_GPIO(SCK_port_ST7920_HAL)->FIOCLR = LPC_PIN(SCK_pin_ST7920_HAL);
+ LPC_GPIO(SCK_port_ST7920_HAL)->FIOCLR = LPC_PIN(SCK_pin_ST7920_HAL);
+ }
+ val = val << 1;
+ }
+ }
+
+ static uint8_t rs_last_state = 255;
+
+ static void u8g_com_LPC1768_st7920_write_byte_sw_spi(uint8_t rs, uint8_t val)
+ {
+ uint8_t i;
+
+ if ( rs != rs_last_state) { // time to send a command/data byte
+ rs_last_state = rs;
+
+ if ( rs == 0 )
+ /* command */
+ spiSend_sw(0x0f8);
+ else
+ /* data */
+ spiSend_sw(0x0fa);
+
+ for( i = 0; i < 4; i++ ) // give the controller some time to process the data
+ u8g_10MicroDelay(); // 2 is bad, 3 is OK, 4 is safe
+ }
+
+ spiSend_sw(val & 0x0f0);
+ spiSend_sw(val << 4);
+ }
+
+
+ uint8_t u8g_com_HAL_LPC1768_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+ {
+ switch(msg)
+ {
+ case U8G_COM_MSG_INIT:
+ #define LPC1768_PIN_PORT(pin) ((uint8_t)((pin >> 5) & 0b111))
+ #define LPC1768_PIN_PIN(pin) ((uint8_t)(pin & 0b11111))
+ SCK_pin_ST7920_HAL = LPC1768_PIN_PIN(u8g->pin_list[U8G_PI_SCK]);
+ SCK_port_ST7920_HAL = LPC1768_PIN_PORT(u8g->pin_list[U8G_PI_SCK]);
+ MOSI_pin_ST7920_HAL_HAL = LPC1768_PIN_PIN(u8g->pin_list[U8G_PI_MOSI]);
+ MOSI_port_ST7920_HAL = LPC1768_PIN_PORT(u8g->pin_list[U8G_PI_MOSI]);
+
+ u8g_SetPILevel(u8g, U8G_PI_CS, 0);
+ u8g_SetPIOutput(u8g, U8G_PI_CS);
+ u8g_SetPILevel(u8g, U8G_PI_SCK, 0);
+ u8g_SetPIOutput(u8g, U8G_PI_SCK);
+ u8g_SetPILevel(u8g, U8G_PI_MOSI, 0);
+ u8g_SetPIOutput(u8g, U8G_PI_MOSI);
+ u8g_Delay(5);
+ u8g->pin_list[U8G_PI_A0_STATE] = 0; /* inital RS state: command mode */
+ break;
+
+ case U8G_COM_MSG_STOP:
+ break;
+
+ case U8G_COM_MSG_RESET:
+ if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_RESET]) u8g_SetPILevel(u8g, U8G_PI_RESET, arg_val);
+ break;
+
+ case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
+ u8g->pin_list[U8G_PI_A0_STATE] = arg_val;
+ break;
+
+ case U8G_COM_MSG_CHIP_SELECT:
+ if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_CS]) u8g_SetPILevel(u8g, U8G_PI_CS, arg_val); //note: the st7920 has an active high chip select
+ break;
+
+ case U8G_COM_MSG_WRITE_BYTE:
+ u8g_com_LPC1768_st7920_write_byte_sw_spi(u8g->pin_list[U8G_PI_A0_STATE], arg_val);
+ break;
+
+ case U8G_COM_MSG_WRITE_SEQ:
+ {
+ uint8_t *ptr = (uint8_t*) arg_ptr;
+ while( arg_val > 0 )
+ {
+ u8g_com_LPC1768_st7920_write_byte_sw_spi(u8g->pin_list[U8G_PI_A0_STATE], *ptr++);
+ arg_val--;
+ }
+ }
+ break;
+
+ case U8G_COM_MSG_WRITE_SEQ_P:
+ {
+ uint8_t *ptr = (uint8_t*) arg_ptr;
+ while( arg_val > 0 )
+ {
+ u8g_com_LPC1768_st7920_write_byte_sw_spi(u8g->pin_list[U8G_PI_A0_STATE], *ptr++);
+ arg_val--;
+ }
+ }
+ break;
+ }
+ return 1;
+ }
+
+#endif //TARGET_LPC1768
diff --git a/Marlin/src/HAL/HAL_LPC1768/u8g_com_HAL_LPC1768_sw_spi.cpp b/Marlin/src/HAL/HAL_LPC1768/u8g_com_HAL_LPC1768_sw_spi.cpp
new file mode 100644
index 0000000000..eca12685a7
--- /dev/null
+++ b/Marlin/src/HAL/HAL_LPC1768/u8g_com_HAL_LPC1768_sw_spi.cpp
@@ -0,0 +1,184 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+/*
+
+ adapted from u8g_com_std_sw_spi.c
+
+ Universal 8bit Graphics Library
+
+ Copyright (c) 2015, olikraus@gmail.com
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without modification,
+ are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice, this list
+ of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or other
+ materials provided with the distribution.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*/
+
+
+
+#if defined (TARGET_LPC1768)
+
+
+#include
+#include
+
+#include
+
+#define LPC_PORT_OFFSET (0x0020)
+#define LPC_PIN(pin) (1UL << pin)
+#define LPC_GPIO(port) ((volatile LPC_GPIO_TypeDef *)(LPC_GPIO0_BASE + LPC_PORT_OFFSET * port))
+
+void delayMicroseconds(uint32_t us);
+void pinMode(int16_t pin, uint8_t mode);
+void digitalWrite(int16_t pin, uint8_t pin_status);
+
+
+uint8_t SCK_pin, SCK_port, MOSI_pin, MOSI_port;
+
+#define SPI_SPEED 2 //20: 200KHz 5:750KHz 2:3-4MHz
+
+static void u8g_sw_spi_HAL_LPC1768_shift_out(uint8_t dataPin, uint8_t clockPin, uint8_t val)
+{
+ for (uint8_t i = 0; i < 8; i++) {
+
+ if (val & 0x80)
+ for (uint8_t j = 0; j < SPI_SPEED; j++) {
+ LPC_GPIO(MOSI_port)->FIOSET = LPC_PIN(MOSI_pin);
+ LPC_GPIO(MOSI_port)->FIOSET = LPC_PIN(MOSI_pin);
+ LPC_GPIO(MOSI_port)->FIOSET = LPC_PIN(MOSI_pin);
+ }
+ else
+ for (uint8_t j = 0; j < SPI_SPEED; j++) {
+ LPC_GPIO(MOSI_port)->FIOCLR = LPC_PIN(MOSI_pin);
+ LPC_GPIO(MOSI_port)->FIOCLR = LPC_PIN(MOSI_pin);
+ LPC_GPIO(MOSI_port)->FIOCLR = LPC_PIN(MOSI_pin);
+ }
+
+ for (uint8_t j = 0; j < SPI_SPEED; j++) {
+ LPC_GPIO(SCK_port)->FIOSET = LPC_PIN(SCK_pin);
+ LPC_GPIO(SCK_port)->FIOSET = LPC_PIN(SCK_pin);
+ LPC_GPIO(SCK_port)->FIOSET = LPC_PIN(SCK_pin);
+ LPC_GPIO(SCK_port)->FIOSET = LPC_PIN(SCK_pin);
+ LPC_GPIO(SCK_port)->FIOSET = LPC_PIN(SCK_pin);
+ }
+
+ for (uint8_t j = 0; j < SPI_SPEED; j++) {
+ LPC_GPIO(SCK_port)->FIOCLR = LPC_PIN(SCK_pin);
+ LPC_GPIO(SCK_port)->FIOCLR = LPC_PIN(SCK_pin);
+ }
+ val = val << 1;
+ }
+}
+
+
+uint8_t u8g_com_HAL_LPC1768_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+
+
+ switch(msg)
+ {
+ case U8G_COM_MSG_INIT:
+ #define LPC1768_PIN_PORT(pin) ((uint8_t)((pin >> 5) & 0b111))
+ #define LPC1768_PIN_PIN(pin) ((uint8_t)(pin & 0b11111))
+ SCK_pin = LPC1768_PIN_PIN(u8g->pin_list[U8G_PI_SCK]);
+ SCK_port = LPC1768_PIN_PORT(u8g->pin_list[U8G_PI_SCK]);
+ MOSI_pin = LPC1768_PIN_PIN(u8g->pin_list[U8G_PI_MOSI]);
+ MOSI_port = LPC1768_PIN_PORT(u8g->pin_list[U8G_PI_MOSI]);
+ // As defined by Arduino INPUT(0x0), OUPUT(0x1), INPUT_PULLUP(0x2)
+ #define OUPUT 0x1
+ pinMode(u8g->pin_list[U8G_PI_SCK], OUPUT);
+ pinMode(u8g->pin_list[U8G_PI_MOSI], OUPUT);
+ pinMode(u8g->pin_list[U8G_PI_CS], OUPUT);
+ pinMode(u8g->pin_list[U8G_PI_A0], OUPUT);
+ if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_RESET]) pinMode(u8g->pin_list[U8G_PI_RESET], OUPUT);
+ digitalWrite(u8g->pin_list[U8G_PI_SCK], 0);
+ digitalWrite(u8g->pin_list[U8G_PI_MOSI], 0);
+ break;
+
+ case U8G_COM_MSG_STOP:
+ break;
+
+ case U8G_COM_MSG_RESET:
+ digitalWrite(u8g->pin_list[U8G_PI_RESET], arg_val);
+ break;
+
+ case U8G_COM_MSG_CHIP_SELECT:
+ digitalWrite(u8g->pin_list[U8G_PI_CS], !arg_val);
+ break;
+
+ case U8G_COM_MSG_WRITE_BYTE:
+ u8g_sw_spi_HAL_LPC1768_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK], arg_val);
+ break;
+
+ case U8G_COM_MSG_WRITE_SEQ:
+ {
+ uint8_t *ptr = (uint8_t *)arg_ptr;
+ while( arg_val > 0 )
+ {
+ u8g_sw_spi_HAL_LPC1768_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK], *ptr++);
+ arg_val--;
+ }
+ }
+ break;
+
+ case U8G_COM_MSG_WRITE_SEQ_P:
+ {
+ uint8_t *ptr = (uint8_t *)arg_ptr;
+ while( arg_val > 0 )
+ {
+ u8g_sw_spi_HAL_LPC1768_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK], u8g_pgm_read(ptr));
+ ptr++;
+ arg_val--;
+ }
+ }
+ break;
+
+ case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
+ digitalWrite(u8g->pin_list[U8G_PI_A0], arg_val);
+ break;
+ }
+ return 1;
+}
+
+#endif // TARGET_LPC1768
diff --git a/Marlin/src/lcd/dogm/HAL_LCD_class_defines.h b/Marlin/src/lcd/dogm/HAL_LCD_class_defines.h
new file mode 100644
index 0000000000..98c061cac8
--- /dev/null
+++ b/Marlin/src/lcd/dogm/HAL_LCD_class_defines.h
@@ -0,0 +1,82 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+
+// use this file to create the public interface for device drivers that are NOT in the U8G library
+
+extern u8g_dev_t u8g_dev_st7565_64128n_HAL_2x_sw_spi;
+extern u8g_dev_t u8g_dev_st7565_64128n_HAL_2x_hw_spi;
+class U8GLIB_64128N_2X_HAL : public U8GLIB
+{
+ public:
+ U8GLIB_64128N_2X_HAL(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
+ : U8GLIB(&u8g_dev_st7565_64128n_HAL_2x_sw_spi, sck, mosi, cs, a0, reset)
+ { }
+ U8GLIB_64128N_2X_HAL(uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
+ : U8GLIB(&u8g_dev_st7565_64128n_HAL_2x_hw_spi, cs, a0, reset)
+ { }
+};
+
+
+extern u8g_dev_t u8g_dev_st7920_128x64_HAL_4x_sw_spi;
+extern u8g_dev_t u8g_dev_st7920_128x64_HAL_4x_hw_spi;
+class U8GLIB_ST7920_128X64_4X_HAL : public U8GLIB
+{
+ public:
+ U8GLIB_ST7920_128X64_4X_HAL(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t reset = U8G_PIN_NONE)
+ : U8GLIB(&u8g_dev_st7920_128x64_HAL_4x_sw_spi, sck, mosi, cs, U8G_PIN_NONE, reset) // a0 = U8G_PIN_NONE
+ { }
+ U8GLIB_ST7920_128X64_4X_HAL(uint8_t cs, uint8_t reset = U8G_PIN_NONE)
+ : U8GLIB(&u8g_dev_st7920_128x64_HAL_4x_hw_spi, cs, U8G_PIN_NONE, reset) // a0 = U8G_PIN_NONE
+ { }
+};
+
+
+
+extern u8g_dev_t u8g_dev_st7920_128x64_rrd_sw_spi;
+class U8GLIB_ST7920_128X64_RRD : public U8GLIB
+{
+ public:
+ U8GLIB_ST7920_128X64_RRD(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t reset = U8G_PIN_NONE)
+ : U8GLIB(&u8g_dev_st7920_128x64_rrd_sw_spi, sck, mosi, cs, U8G_PIN_NONE, reset) // a0 = U8G_PIN_NONE
+ { }
+};
+
+
+
+extern u8g_dev_t u8g_dev_sh1106_128x64_2x_i2c_2_wire;
+class U8GLIB_SH1106_128X64_2X_I2C_2_WIRE : public U8GLIB {
+ public:
+ U8GLIB_SH1106_128X64_2X_I2C_2_WIRE(uint8_t options = U8G_I2C_OPT_NONE)
+ : U8GLIB(&u8g_dev_sh1106_128x64_2x_i2c_2_wire, options)
+ { }
+};
+
+
+
+extern u8g_dev_t u8g_dev_ssd1306_128x64_2x_i2c_2_wire;
+class U8GLIB_SSD1306_128X64_2X_I2C_2_WIRE : public U8GLIB {
+ public:
+ U8GLIB_SSD1306_128X64_2X_I2C_2_WIRE(uint8_t options = U8G_I2C_OPT_NONE)
+ : U8GLIB(&u8g_dev_ssd1306_128x64_2x_i2c_2_wire, options)
+ { }
+};
diff --git a/Marlin/src/lcd/dogm/HAL_LCD_com_defines.h b/Marlin/src/lcd/dogm/HAL_LCD_com_defines.h
new file mode 100644
index 0000000000..5175c5d43c
--- /dev/null
+++ b/Marlin/src/lcd/dogm/HAL_LCD_com_defines.h
@@ -0,0 +1,66 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+// use this file to select the com driver for device drivers that are NOT in the U8G library
+
+
+#ifndef U8G_HAL_LINKS
+
+ uint8_t u8g_com_arduino_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
+ #define U8G_COM_HAL_SW_SPI_FN u8g_com_arduino_sw_spi_fn
+
+ uint8_t u8g_com_arduino_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
+ #define U8G_COM_HAL_HW_SPI_FN u8g_com_arduino_hw_spi_fn
+
+ uint8_t u8g_com_arduino_st7920_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
+ #define U8G_COM_ST7920_HAL_SW_SPI u8g_com_arduino_st7920_spi_fn
+
+ uint8_t u8g_com_arduino_st7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
+ #define U8G_COM_ST7920_HAL_HW_SPI u8g_com_arduino_st7920_hw_spi_fn
+
+ uint8_t u8g_com_HAL_LPC1768_ssd_hw_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
+ #define U8G_COM_SSD_I2C_HAL u8g_com_arduino_ssd_i2c_fn
+
+#elif TARGET_LPC1768
+ uint8_t u8g_com_HAL_LPC1768_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
+ #define U8G_COM_HAL_SW_SPI_FN u8g_com_HAL_LPC1768_sw_spi_fn
+
+ uint8_t u8g_com_HAL_LPC1768_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
+ #define U8G_COM_HAL_HW_SPI_FN u8g_com_HAL_LPC1768_hw_spi_fn
+
+ uint8_t u8g_com_HAL_LPC1768_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
+ #define U8G_COM_ST7920_HAL_SW_SPI u8g_com_HAL_LPC1768_ST7920_sw_spi_fn
+
+ uint8_t u8g_com_HAL_LPC1768_ST7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
+ #define U8G_COM_ST7920_HAL_HW_SPI u8g_com_HAL_LPC1768_ST7920_hw_spi_fn
+
+ uint8_t u8g_com_HAL_LPC1768_ssd_hw_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
+ #define U8G_COM_SSD_I2C_HAL u8g_com_HAL_LPC1768_ssd_hw_i2c_fn
+
+#else // need to give them some definition or else get compiler errors
+ uint8_t u8g_com_null_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
+ #define U8G_COM_HAL_SW_SPI_FN u8g_com_null_fn
+ #define U8G_COM_HAL_HW_SPI_FN u8g_com_null_fn
+ #define U8G_COM_ST7920_HAL_SW_SPI u8g_com_null_fn
+ #define U8G_COM_ST7920_HAL_HW_SPI u8g_com_null_fn
+ #define U8G_COM_SSD_I2C_HAL u8g_com_null_fn
+#endif
\ No newline at end of file
diff --git a/Marlin/src/lcd/dogm/u8g_dev_ssd1306_sh1106_128x64_I2C.cpp b/Marlin/src/lcd/dogm/u8g_dev_ssd1306_sh1106_128x64_I2C.cpp
new file mode 100644
index 0000000000..8d0221fc89
--- /dev/null
+++ b/Marlin/src/lcd/dogm/u8g_dev_ssd1306_sh1106_128x64_I2C.cpp
@@ -0,0 +1,320 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+
+/*
+
+ u8g_dev_ssd1306_128x64.c
+
+ Universal 8bit Graphics Library
+
+ Copyright (c) 2011, olikraus@gmail.com
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without modification,
+ are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice, this list
+ of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or other
+ materials provided with the distribution.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+*/
+
+/**
+ * These routines are meant for two wire I2C interfaces.
+ *
+ * Three and four wire I2C interfaces have an A0 line. That line is
+ * used to switch between command and data modes.
+ *
+ * The two wire LCDs use an instruction byte to signal if data or
+ * command info is to follow. The command stream needs the instruction
+ * byte between eack command byte. The data stream needs one at the
+ * beginning.
+ */
+
+#include
+#include
+
+#define WIDTH 128
+#define HEIGHT 64
+#define PAGE_HEIGHT 8
+
+uint8_t u8g_WriteEscSeqP_2_wire(u8g_t *u8g, u8g_dev_t *dev, const uint8_t *esc_seq);
+
+// The sh1106 is compatible to the ssd1306, but is 132x64. 128x64 display area is centered within
+// the 132x64.
+
+
+static const uint8_t u8g_dev_sh1106_128x64_data_start_2_wire[] PROGMEM = {
+ 0x010, // set upper 4 bit of the col adr to 0
+ 0x002, // set lower 4 bit of the col adr to 2 (centered display with ssd1306)
+ U8G_ESC_END // end of sequence
+};
+
+
+static const uint8_t u8g_dev_sh1106_128x64_init_seq_2_wire[] PROGMEM = {
+ U8G_ESC_ADR(0), // initiate command mode
+ 0x0ae, /* display off, sleep mode */
+ 0x0a8, 0x03f, /* mux ratio */
+ 0x0d3, 0x00, /* display offset */
+ 0x040, /* start line */
+ 0x0a1, /* segment remap a0/a1*/
+ 0x0c8, /* c0: scan dir normal, c8: reverse */
+ 0x0da, 0x012, /* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5) */
+ 0x081, 0x0cf, /* [2] set contrast control */
+ 0x020, 0x002, /* 2012-05-27: page addressing mode */
+ 0x21, 2, 0x81, // set column range from 0 through 131
+ 0x22, 0, 7, // set page range from 0 through 7
+ 0x0d9, 0x0f1, /* [2] pre-charge period 0x022/f1*/
+ 0x0db, 0x040, /* vcomh deselect level */
+ 0x0a4, /* output ram to display */
+ 0x0a6, /* none inverted normal display mode */
+ 0x0d5, 0x080, /* clock divide ratio (0x00=1) and oscillator frequency (0x8) */
+ 0x08d, 0x014, /* [2] charge pump setting (p62): 0x014 enable, 0x010 disable */
+ 0x02e, /* 2012-05-27: Deactivate scroll */
+ 0x0af, /* display on */
+ U8G_ESC_END /* end of sequence */
+};
+
+
+uint8_t u8g_dev_sh1106_128x64_2x_2_wire_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+ switch(msg)
+ {
+ case U8G_DEV_MSG_INIT:
+ u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
+ u8g_WriteEscSeqP_2_wire(u8g, dev, u8g_dev_sh1106_128x64_init_seq_2_wire);
+ break;
+ case U8G_DEV_MSG_STOP:
+ break;
+ case U8G_DEV_MSG_PAGE_NEXT:
+ {
+ u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+ u8g_SetAddress(u8g, dev, 0); // instruction mode
+ u8g_WriteEscSeqP_2_wire(u8g, dev, u8g_dev_sh1106_128x64_data_start_2_wire);
+ u8g_WriteByte(u8g, dev, 0x0b0 | (pb->p.page*2)); // select current page
+ u8g_SetAddress(u8g, dev, 1); // data mode
+ u8g_WriteSequence(u8g, dev, pb->width, (uint8_t *) pb->buf);
+ u8g_SetChipSelect(u8g, dev, 0);
+ u8g_SetAddress(u8g, dev, 0); // instruction mode
+ u8g_WriteEscSeqP_2_wire(u8g, dev, u8g_dev_sh1106_128x64_data_start_2_wire);
+ u8g_WriteByte(u8g, dev, 0x0b0 | (pb->p.page*2+1)); // select current page
+ u8g_SetAddress(u8g, dev, 1); // data mode
+ u8g_WriteSequence(u8g, dev, pb->width, (uint8_t *)(pb->buf)+pb->width);
+ u8g_SetChipSelect(u8g, dev, 0);
+ }
+ break;
+ case U8G_DEV_MSG_SLEEP_ON:
+ return 1;
+ case U8G_DEV_MSG_SLEEP_OFF:
+ return 1;
+ }
+ return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
+}
+
+
+uint8_t u8g_dev_sh1106_128x64_2x_buf[WIDTH*2] U8G_NOCOMMON ;
+u8g_pb_t u8g_dev_sh1106_128x64_2x_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_sh1106_128x64_2x_buf};
+u8g_dev_t u8g_dev_sh1106_128x64_2x_i2c = { u8g_dev_sh1106_128x64_2x_2_wire_fn, &u8g_dev_sh1106_128x64_2x_pb, U8G_COM_SSD_I2C_HAL };
+
+
+uint8_t u8g_dev_sh1106_128x64_2x_i2c_2_wire_buf[WIDTH*2] U8G_NOCOMMON ;
+u8g_pb_t u8g_dev_sh1106_128x64_2x_i2c_2_wire_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_sh1106_128x64_2x_i2c_2_wire_buf};
+u8g_dev_t u8g_dev_sh1106_128x64_2x_i2c_2_wire = { u8g_dev_sh1106_128x64_2x_2_wire_fn, &u8g_dev_sh1106_128x64_2x_i2c_2_wire_pb, U8G_COM_SSD_I2C_HAL };
+
+/////////////////////////////////////////////////////////////////////////////////////////////
+
+static const uint8_t u8g_dev_ssd1306_128x64_data_start_2_wire[] PROGMEM = {
+ 0x010, // set upper 4 bit of the col adr to 0
+ 0x000, // set lower 4 bit of the col adr to 0
+ U8G_ESC_END // end of sequence
+};
+
+
+static const uint8_t u8g_dev_ssd1306_128x64_init_seq_2_wire[] PROGMEM = {
+ U8G_ESC_ADR(0), // initiate command mode
+ 0x0ae, /* display off, sleep mode */
+ 0x0a8, 0x03f, /* mux ratio */
+ 0x0d3, 0x00, /* display offset */
+ 0x040, /* start line */
+ 0x0a1, /* segment remap a0/a1*/
+ 0x0c8, /* c0: scan dir normal, c8: reverse */
+ 0x0da, 0x012, /* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5) */
+ 0x081, 0x0cf, /* [2] set contrast control */
+ 0x020, 0x002, /* 2012-05-27: page addressing mode */
+ 0x21, 0, 0x7f, // set column range from 0 through 127
+ 0x22, 0, 7, // set page range from 0 through 7
+ 0x0d9, 0x0f1, /* [2] pre-charge period 0x022/f1*/
+ 0x0db, 0x040, /* vcomh deselect level */
+ 0x0a4, /* output ram to display */
+ 0x0a6, /* none inverted normal display mode */
+ 0x0d5, 0x080, /* clock divide ratio (0x00=1) and oscillator frequency (0x8) */
+ 0x08d, 0x014, /* [2] charge pump setting (p62): 0x014 enable, 0x010 disable */
+ 0x02e, /* 2012-05-27: Deactivate scroll */
+ 0x0af, /* display on */
+ U8G_ESC_END /* end of sequence */
+};
+
+
+uint8_t u8g_dev_ssd1306_128x64_2x_2_wire_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+ switch(msg)
+ {
+ case U8G_DEV_MSG_INIT:
+ u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
+ u8g_WriteEscSeqP_2_wire(u8g, dev, u8g_dev_ssd1306_128x64_init_seq_2_wire);
+ break;
+ case U8G_DEV_MSG_STOP:
+ break;
+ case U8G_DEV_MSG_PAGE_NEXT:
+ {
+ u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+ u8g_SetAddress(u8g, dev, 0); // instruction mode
+ u8g_WriteEscSeqP_2_wire(u8g, dev, u8g_dev_ssd1306_128x64_data_start_2_wire);
+ u8g_WriteByte(u8g, dev, 0x0b0 | (pb->p.page*2)); // select current page
+ u8g_SetAddress(u8g, dev, 1); // data mode
+ u8g_WriteSequence(u8g, dev, pb->width, (uint8_t *) pb->buf);
+ u8g_SetChipSelect(u8g, dev, 0);
+ u8g_SetAddress(u8g, dev, 0); // instruction mode
+ u8g_WriteEscSeqP_2_wire(u8g, dev, u8g_dev_ssd1306_128x64_data_start_2_wire);
+ u8g_WriteByte(u8g, dev, 0x0b0 | (pb->p.page*2+1)); // select current page
+ u8g_SetAddress(u8g, dev, 1); // data mode
+ u8g_WriteSequence(u8g, dev, pb->width, (uint8_t *)(pb->buf)+pb->width);
+ u8g_SetChipSelect(u8g, dev, 0);
+ }
+ break;
+ case U8G_DEV_MSG_SLEEP_ON:
+ return 1;
+ case U8G_DEV_MSG_SLEEP_OFF:
+ return 1;
+ }
+ return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
+}
+
+
+uint8_t u8g_dev_ssd1306_128x64_2x_buf[WIDTH*2] U8G_NOCOMMON ;
+u8g_pb_t u8g_dev_ssd1306_128x64_2x_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_ssd1306_128x64_2x_buf};
+u8g_dev_t u8g_dev_ssd1306_128x64_2x_i2c = { u8g_dev_ssd1306_128x64_2x_2_wire_fn, &u8g_dev_ssd1306_128x64_2x_pb, U8G_COM_SSD_I2C_HAL };
+
+
+uint8_t u8g_dev_ssd1306_128x64_2x_i2c_2_wire_buf[WIDTH*2] U8G_NOCOMMON ;
+u8g_pb_t u8g_dev_ssd1306_128x64_2x_i2c_2_wire_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_ssd1306_128x64_2x_i2c_2_wire_buf};
+u8g_dev_t u8g_dev_ssd1306_128x64_2x_i2c_2_wire = { u8g_dev_ssd1306_128x64_2x_2_wire_fn, &u8g_dev_ssd1306_128x64_2x_i2c_2_wire_pb, U8G_COM_SSD_I2C_HAL };
+
+
+/////////////////////////////////////////////////////////////////////////////////////////////
+
+// This routine adds the instruction byte in between the command bytes. This makes the init
+// sequences a lot easier to read.
+
+#define I2C_CMD_MODE 0x080
+
+uint8_t u8g_WriteEscSeqP_2_wire(u8g_t *u8g, u8g_dev_t *dev, const uint8_t *esc_seq)
+{
+ uint8_t is_escape = 0;
+ uint8_t value;
+ for(;;)
+ {
+ value = u8g_pgm_read(esc_seq);
+ if ( is_escape == 0 )
+ {
+ if ( value != 255 )
+ {
+ if ( u8g_WriteByte(u8g, dev, value) == 0 )
+ return 0;
+ if ( u8g_WriteByte(u8g, dev, I2C_CMD_MODE) == 0 )
+ return 0;
+ }
+ else
+ {
+ is_escape = 1;
+ }
+ }
+ else
+ {
+ if ( value == 255 )
+ {
+ if ( u8g_WriteByte(u8g, dev, value) == 0 )
+ return 0;
+ if ( u8g_WriteByte(u8g, dev, I2C_CMD_MODE) == 0 )
+ return 0;
+ }
+ else if ( value == 254 )
+ {
+ break;
+ }
+ else if ( value >= 0x0f0 )
+ {
+ /* not yet used, do nothing */
+ }
+ else if ( value >= 0xe0 )
+ {
+ u8g_SetAddress(u8g, dev, value & 0x0f);
+ }
+ else if ( value >= 0xd0 )
+ {
+ u8g_SetChipSelect(u8g, dev, value & 0x0f);
+ }
+ else if ( value >= 0xc0 )
+ {
+ u8g_SetResetLow(u8g, dev);
+ value &= 0x0f;
+ value <<= 4;
+ value+=2;
+ u8g_Delay(value);
+ u8g_SetResetHigh(u8g, dev);
+ u8g_Delay(value);
+ }
+ else if ( value >= 0xbe )
+ {
+ /* not yet implemented */
+ /* u8g_SetVCC(u8g, dev, value & 0x01); */
+ }
+ else if ( value <= 127 )
+ {
+ u8g_Delay(value);
+ }
+ is_escape = 0;
+ }
+ esc_seq++;
+ }
+ return 1;
+}
+
diff --git a/Marlin/src/lcd/dogm/u8g_dev_st7565_64128n_HAL.cpp b/Marlin/src/lcd/dogm/u8g_dev_st7565_64128n_HAL.cpp
new file mode 100644
index 0000000000..6019b82282
--- /dev/null
+++ b/Marlin/src/lcd/dogm/u8g_dev_st7565_64128n_HAL.cpp
@@ -0,0 +1,229 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+
+/*
+
+ u8g_dev_st7565_64128n_HAL.c (Displaytech)
+
+ Universal 8bit Graphics Library
+
+ Copyright (c) 2011, olikraus@gmail.com
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without modification,
+ are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice, this list
+ of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or other
+ materials provided with the distribution.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+*/
+
+#include
+
+#include
+
+#define WIDTH 128
+#define HEIGHT 64
+#define PAGE_HEIGHT 8
+
+/* init sequence from https://github.com/adafruit/ST7565-LCD/blob/master/ST7565/ST7565.cpp */
+static const uint8_t u8g_dev_st7565_64128n_HAL_init_seq[] PROGMEM = {
+ U8G_ESC_CS(0), /* disable chip */
+ U8G_ESC_ADR(0), /* instruction mode */
+ U8G_ESC_CS(1), /* enable chip */
+ U8G_ESC_RST(15), /* do reset low pulse with (15*16)+2 milliseconds (=maximum delay)*/
+
+ 0x0A2, /* 0x0a2: LCD bias 1/9 (according to Displaytech 64128N datasheet) */
+ 0x0A0, /* Normal ADC Select (according to Displaytech 64128N datasheet) */
+
+ 0x0c8, /* common output mode: set scan direction normal operation/SHL Select, 0x0c0 --> SHL = 0, normal, 0x0c8 --> SHL = 1 */
+ 0x040, /* Display start line for Displaytech 64128N */
+
+ 0x028 | 0x04, /* power control: turn on voltage converter */
+ U8G_ESC_DLY(50), /* delay 50 ms */
+
+ 0x028 | 0x06, /* power control: turn on voltage regulator */
+ U8G_ESC_DLY(50), /* delay 50 ms */
+
+ 0x028 | 0x07, /* power control: turn on voltage follower */
+ U8G_ESC_DLY(50), /* delay 50 ms */
+
+ 0x010, /* Set V0 voltage resistor ratio. Setting for controlling brightness of Displaytech 64128N */
+
+ 0x0a6, /* display normal, bit val 0: LCD pixel off. */
+
+ 0x081, /* set contrast */
+ 0x01e, /* Contrast value. Setting for controlling brightness of Displaytech 64128N */
+
+
+ 0x0af, /* display on */
+
+ U8G_ESC_DLY(100), /* delay 100 ms */
+ 0x0a5, /* display all points, ST7565 */
+ U8G_ESC_DLY(100), /* delay 100 ms */
+ U8G_ESC_DLY(100), /* delay 100 ms */
+ 0x0a4, /* normal display */
+ U8G_ESC_CS(0), /* disable chip */
+ U8G_ESC_END /* end of sequence */
+};
+
+static const uint8_t u8g_dev_st7565_64128n_HAL_data_start[] PROGMEM = {
+ U8G_ESC_ADR(0), /* instruction mode */
+ U8G_ESC_CS(1), /* enable chip */
+ 0x010, /* set upper 4 bit of the col adr to 0x10 */
+ 0x000, /* set lower 4 bit of the col adr to 0x00. Changed for DisplayTech 64128N */
+ U8G_ESC_END /* end of sequence */
+};
+
+static const uint8_t u8g_dev_st7565_64128n_HAL_sleep_on[] PROGMEM = {
+ U8G_ESC_ADR(0), /* instruction mode */
+ U8G_ESC_CS(1), /* enable chip */
+ 0x0ac, /* static indicator off */
+ 0x000, /* indicator register set (not sure if this is required) */
+ 0x0ae, /* display off */
+ 0x0a5, /* all points on */
+ U8G_ESC_CS(0), /* disable chip, bugfix 12 nov 2014 */
+ U8G_ESC_END /* end of sequence */
+ };
+
+static const uint8_t u8g_dev_st7565_64128n_HAL_sleep_off[] PROGMEM = {
+ U8G_ESC_ADR(0), /* instruction mode */
+ U8G_ESC_CS(1), /* enable chip */
+ 0x0a4, /* all points off */
+ 0x0af, /* display on */
+ U8G_ESC_DLY(50), /* delay 50 ms */
+ U8G_ESC_CS(0), /* disable chip, bugfix 12 nov 2014 */
+ U8G_ESC_END /* end of sequence */
+};
+
+uint8_t u8g_dev_st7565_64128n_HAL_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+ switch(msg)
+ {
+ case U8G_DEV_MSG_INIT:
+ u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_400NS);
+ u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_64128n_HAL_init_seq);
+ break;
+ case U8G_DEV_MSG_STOP:
+ break;
+ case U8G_DEV_MSG_PAGE_NEXT:
+ {
+ u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+ u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_64128n_HAL_data_start);
+ u8g_WriteByte(u8g, dev, 0x0b0 | pb->p.page); /* select current page (ST7565R) */
+ u8g_SetAddress(u8g, dev, 1); /* data mode */
+ if ( u8g_pb_WriteBuffer(pb, u8g, dev) == 0 )
+ return 0;
+ u8g_SetChipSelect(u8g, dev, 0);
+ }
+ break;
+ case U8G_DEV_MSG_CONTRAST:
+ u8g_SetChipSelect(u8g, dev, 1);
+ u8g_SetAddress(u8g, dev, 0); /* instruction mode */
+ u8g_WriteByte(u8g, dev, 0x081);
+ u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2);
+ u8g_SetChipSelect(u8g, dev, 0);
+ return 1;
+ case U8G_DEV_MSG_SLEEP_ON:
+ u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_64128n_HAL_sleep_on);
+ return 1;
+ case U8G_DEV_MSG_SLEEP_OFF:
+ u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_64128n_HAL_sleep_off);
+ return 1;
+ }
+ return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
+}
+
+uint8_t u8g_dev_st7565_64128n_HAL_2x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+ switch(msg)
+ {
+ case U8G_DEV_MSG_INIT:
+ u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_400NS);
+ u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_64128n_HAL_init_seq);
+ break;
+ case U8G_DEV_MSG_STOP:
+ break;
+ case U8G_DEV_MSG_PAGE_NEXT:
+ {
+ u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+
+ u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_64128n_HAL_data_start);
+ u8g_WriteByte(u8g, dev, 0x0b0 | (2*pb->p.page)); /* select current page (ST7565R) */
+ u8g_SetAddress(u8g, dev, 1); /* data mode */
+ u8g_WriteSequence(u8g, dev, pb->width, (uint8_t *)pb->buf);
+ u8g_SetChipSelect(u8g, dev, 0);
+
+ u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_64128n_HAL_data_start);
+ u8g_WriteByte(u8g, dev, 0x0b0 | (2*pb->p.page+1)); /* select current page (ST7565R) */
+ u8g_SetAddress(u8g, dev, 1); /* data mode */
+ u8g_WriteSequence(u8g, dev, pb->width, (uint8_t *)(pb->buf)+pb->width);
+ u8g_SetChipSelect(u8g, dev, 0);
+ }
+ break;
+ case U8G_DEV_MSG_CONTRAST:
+ u8g_SetChipSelect(u8g, dev, 1);
+ u8g_SetAddress(u8g, dev, 0); /* instruction mode */
+ u8g_WriteByte(u8g, dev, 0x081);
+ u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2);
+ u8g_SetChipSelect(u8g, dev, 0);
+ return 1;
+ case U8G_DEV_MSG_SLEEP_ON:
+ u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_64128n_HAL_sleep_on);
+ return 1;
+ case U8G_DEV_MSG_SLEEP_OFF:
+ u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_64128n_HAL_sleep_off);
+ return 1;
+ }
+ return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
+}
+
+
+U8G_PB_DEV(u8g_dev_st7565_64128n_HAL_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_64128n_HAL_fn, U8G_COM_HAL_SW_SPI_FN);
+
+uint8_t u8g_dev_st7565_64128n_HAL_2x_buf[WIDTH*2] U8G_NOCOMMON ;
+u8g_pb_t u8g_dev_st7565_64128n_HAL_2x_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_st7565_64128n_HAL_2x_buf};
+u8g_dev_t u8g_dev_st7565_64128n_HAL_2x_sw_spi = { u8g_dev_st7565_64128n_HAL_2x_fn, &u8g_dev_st7565_64128n_HAL_2x_pb, U8G_COM_HAL_SW_SPI_FN };
+
+
+U8G_PB_DEV(u8g_dev_st7565_64128n_HAL_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_64128n_HAL_fn, U8G_COM_HAL_HW_SPI_FN);
+u8g_dev_t u8g_dev_st7565_64128n_HAL_2x_hw_spi = { u8g_dev_st7565_64128n_HAL_2x_fn, &u8g_dev_st7565_64128n_HAL_2x_pb, U8G_COM_HAL_HW_SPI_FN };
\ No newline at end of file
diff --git a/Marlin/src/lcd/dogm/u8g_dev_st7920_128x64_HAL.cpp b/Marlin/src/lcd/dogm/u8g_dev_st7920_128x64_HAL.cpp
new file mode 100644
index 0000000000..d3f7f66eeb
--- /dev/null
+++ b/Marlin/src/lcd/dogm/u8g_dev_st7920_128x64_HAL.cpp
@@ -0,0 +1,202 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+/*
+
+ u8g_dev_st7920_128x64_HAL.c
+
+ Universal 8bit Graphics Library
+
+ Copyright (c) 2011, olikraus@gmail.com
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without modification,
+ are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice, this list
+ of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or other
+ materials provided with the distribution.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+*/
+
+#include
+
+#include
+
+#define WIDTH 128
+#define HEIGHT 64
+#define PAGE_HEIGHT 8
+
+
+/* init sequence from https://github.com/adafruit/ST7565-LCD/blob/master/ST7565/ST7565.cpp */
+static const uint8_t u8g_dev_st7920_128x64_HAL_init_seq[] PROGMEM = {
+ U8G_ESC_CS(0), /* disable chip */
+ U8G_ESC_ADR(0), /* instruction mode */
+ U8G_ESC_RST(15), /* do reset low pulse with (15*16)+2 milliseconds (=maximum delay)*/
+ U8G_ESC_DLY(100), /* 8 Dez 2012: additional delay 100 ms because of reset*/
+ U8G_ESC_CS(1), /* enable chip */
+ U8G_ESC_DLY(50), /* delay 50 ms */
+
+ 0x038, /* 8 Bit interface (DL=1), basic instruction set (RE=0) */
+ 0x00c, /* display on, cursor & blink off; 0x08: all off */
+ 0x006, /* Entry mode: Cursor move to right ,DDRAM address counter (AC) plus 1, no shift */
+ 0x002, /* disable scroll, enable CGRAM adress */
+ 0x001, /* clear RAM, needs 1.6 ms */
+ U8G_ESC_DLY(100), /* delay 100 ms */
+
+ U8G_ESC_CS(0), /* disable chip */
+ U8G_ESC_END /* end of sequence */
+};
+
+uint8_t u8g_dev_st7920_128x64_HAL_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+ switch(msg)
+ {
+ case U8G_DEV_MSG_INIT:
+ u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_400NS);
+ u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7920_128x64_HAL_init_seq);
+ break;
+ case U8G_DEV_MSG_STOP:
+ break;
+ case U8G_DEV_MSG_PAGE_NEXT:
+ {
+ uint8_t y, i;
+ uint8_t *ptr;
+ u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+
+ u8g_SetAddress(u8g, dev, 0); /* cmd mode */
+ u8g_SetChipSelect(u8g, dev, 1);
+ y = pb->p.page_y0;
+ ptr = (uint8_t *)pb->buf;
+ for( i = 0; i < 8; i ++ )
+ {
+ u8g_SetAddress(u8g, dev, 0); /* cmd mode */
+ u8g_WriteByte(u8g, dev, 0x03e ); /* enable extended mode */
+
+ if ( y < 32 )
+ {
+ u8g_WriteByte(u8g, dev, 0x080 | y ); /* y pos */
+ u8g_WriteByte(u8g, dev, 0x080 ); /* set x pos to 0*/
+ }
+ else
+ {
+ u8g_WriteByte(u8g, dev, 0x080 | (y-32) ); /* y pos */
+ u8g_WriteByte(u8g, dev, 0x080 | 8); /* set x pos to 64*/
+ }
+
+ u8g_SetAddress(u8g, dev, 1); /* data mode */
+ u8g_WriteSequence(u8g, dev, WIDTH/8, ptr);
+ ptr += WIDTH/8;
+ y++;
+ }
+ u8g_SetChipSelect(u8g, dev, 0);
+ }
+ break;
+ }
+ return u8g_dev_pb8h1_base_fn(u8g, dev, msg, arg);
+}
+
+uint8_t u8g_dev_st7920_128x64_HAL_4x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+ switch(msg)
+ {
+ case U8G_DEV_MSG_INIT:
+ u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_400NS);
+ u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7920_128x64_HAL_init_seq);
+ break;
+
+ case U8G_DEV_MSG_STOP:
+ break;
+
+ case U8G_DEV_MSG_PAGE_NEXT:
+ {
+ uint8_t y, i;
+ uint8_t *ptr;
+ u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+
+ u8g_SetAddress(u8g, dev, 0); /* cmd mode */
+ u8g_SetChipSelect(u8g, dev, 1);
+ y = pb->p.page_y0;
+ ptr = (uint8_t *)pb->buf;
+ for( i = 0; i < 32; i ++ )
+ {
+ u8g_SetAddress(u8g, dev, 0); /* cmd mode */
+ u8g_WriteByte(u8g, dev, 0x03e ); /* enable extended mode */
+
+ if ( y < 32 )
+ {
+ u8g_WriteByte(u8g, dev, 0x080 | y ); /* y pos */
+ u8g_WriteByte(u8g, dev, 0x080 ); /* set x pos to 0*/
+ }
+ else
+ {
+ u8g_WriteByte(u8g, dev, 0x080 | (y-32) ); /* y pos */
+ u8g_WriteByte(u8g, dev, 0x080 | 8); /* set x pos to 64*/
+ }
+
+ u8g_SetAddress(u8g, dev, 1); /* data mode */
+ u8g_WriteSequence(u8g, dev, WIDTH/8, ptr);
+ ptr += WIDTH/8;
+ y++;
+ }
+ u8g_SetChipSelect(u8g, dev, 0);
+ }
+ break;
+ }
+ return u8g_dev_pb32h1_base_fn(u8g, dev, msg, arg);
+}
+
+U8G_PB_DEV(u8g_dev_st7920_128x64_HAL_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7920_128x64_HAL_fn, U8G_COM_ST7920_HAL_SW_SPI);
+
+#define QWIDTH (WIDTH*4)
+uint8_t u8g_dev_st7920_128x64_HAL_4x_buf[QWIDTH] U8G_NOCOMMON ;
+u8g_pb_t u8g_dev_st7920_128x64_HAL_4x_pb = { {32, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_st7920_128x64_HAL_4x_buf};
+u8g_dev_t u8g_dev_st7920_128x64_HAL_4x_sw_spi = { u8g_dev_st7920_128x64_HAL_4x_fn, &u8g_dev_st7920_128x64_HAL_4x_pb, U8G_COM_ST7920_HAL_SW_SPI };
+
+
+U8G_PB_DEV(u8g_dev_st7920_128x64_HAL_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7920_128x64_HAL_fn, U8G_COM_ST7920_HAL_HW_SPI);
+u8g_dev_t u8g_dev_st7920_128x64_HAL_4x_hw_spi = { u8g_dev_st7920_128x64_HAL_4x_fn, &u8g_dev_st7920_128x64_HAL_4x_pb, U8G_COM_ST7920_HAL_HW_SPI };
+
+
+#ifdef U8G_HAL_LINKS
+ // Also use this device for HAL version of rrd class. This results in the same device being used
+ // for the ST7920 for HAL systems no matter what is selected in ultralcd_impl_DOGM.h.
+ u8g_dev_t u8g_dev_st7920_128x64_rrd_sw_spi = { u8g_dev_st7920_128x64_HAL_4x_fn, &u8g_dev_st7920_128x64_HAL_4x_pb, U8G_COM_ST7920_HAL_SW_SPI };
+#endif
diff --git a/Marlin/src/lcd/dogm/ultralcd_st7565_u8glib_VIKI.h b/Marlin/src/lcd/dogm/ultralcd_st7565_u8glib_VIKI.h
deleted file mode 100644
index f36dec8061..0000000000
--- a/Marlin/src/lcd/dogm/ultralcd_st7565_u8glib_VIKI.h
+++ /dev/null
@@ -1,259 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see .
- *
- */
-
-#ifndef ULCDST7565_H
-#define ULCDST7565_H
-
-#include "../../Marlin.h"
-
-#if ENABLED(U8GLIB_ST7565_64128N)
-
-#define ST7565_CLK_PIN DOGLCD_SCK
-#define ST7565_DAT_PIN DOGLCD_MOSI
-#define ST7565_CS_PIN DOGLCD_CS
-#define ST7565_A0_PIN DOGLCD_A0
-
-#include
-
-#define WIDTH 128
-#define HEIGHT 64
-#define PAGE_HEIGHT 8
-
-//set optimization so ARDUINO optimizes this file
-#pragma GCC optimize (3)
-
-// If you want you can define your own set of delays in Configuration.h
-//#define ST7565_DELAY_1 DELAY_0_NOP
-//#define ST7565_DELAY_2 DELAY_0_NOP
-//#define ST7565_DELAY_3 DELAY_0_NOP
-
-/*
-#define ST7565_DELAY_1 u8g_10MicroDelay()
-#define ST7565_DELAY_2 u8g_10MicroDelay()
-#define ST7565_DELAY_3 u8g_10MicroDelay()
-*/
-
-#if F_CPU >= 20000000
- #define CPU_ST7565_DELAY_1 DELAY_0_NOP
- #define CPU_ST7565_DELAY_2 DELAY_0_NOP
- #define CPU_ST7565_DELAY_3 DELAY_1_NOP
-#elif MB(3DRAG) || MB(K8200) || MB(K8400)
- #define CPU_ST7565_DELAY_1 DELAY_0_NOP
- #define CPU_ST7565_DELAY_2 DELAY_3_NOP
- #define CPU_ST7565_DELAY_3 DELAY_0_NOP
-#elif MB(MINIRAMBO)
- #define CPU_ST7565_DELAY_1 DELAY_0_NOP
- #define CPU_ST7565_DELAY_2 DELAY_4_NOP
- #define CPU_ST7565_DELAY_3 DELAY_0_NOP
-#elif MB(RAMBO)
- #define CPU_ST7565_DELAY_1 DELAY_0_NOP
- #define CPU_ST7565_DELAY_2 DELAY_0_NOP
- #define CPU_ST7565_DELAY_3 DELAY_0_NOP
-#elif F_CPU == 16000000
- #define CPU_ST7565_DELAY_1 DELAY_0_NOP
- #define CPU_ST7565_DELAY_2 DELAY_0_NOP
- #define CPU_ST7565_DELAY_3 DELAY_1_NOP
-#else
- #error "No valid condition for delays in 'ultralcd_st7565_u8glib_VIKI.h'"
-#endif
-
-#ifndef ST7565_DELAY_1
- #define ST7565_DELAY_1 CPU_ST7565_DELAY_1
-#endif
-#ifndef ST7565_DELAY_2
- #define ST7565_DELAY_2 CPU_ST7565_DELAY_2
-#endif
-#ifndef ST7565_DELAY_3
- #define ST7565_DELAY_3 CPU_ST7565_DELAY_3
-#endif
-
-#if ENABLED(SHARED_SPI) // Re-ARM requires that the LCD and the SD card share a single SPI
-
- #define ST7565_WRITE_BYTE(a) { spiSend((uint8_t)a); U8G_DELAY; }
- #define ST7560_WriteSequence(count, pointer) { uint8_t *ptr = pointer; for (uint8_t i = 0; i < count; i++) {spiSend( *ptr++);} DELAY_10US; }
-
-#else
- #define ST7565_SND_BIT \
- WRITE(ST7565_CLK_PIN, LOW); ST7565_DELAY_1; \
- WRITE(ST7565_DAT_PIN, val & 0x80); ST7565_DELAY_2; \
- WRITE(ST7565_CLK_PIN, HIGH); ST7565_DELAY_3; \
- WRITE(ST7565_CLK_PIN, LOW);\
- val <<= 1
-
- static void ST7565_SWSPI_SND_8BIT(uint8_t val) {
- ST7565_SND_BIT; // 1
- ST7565_SND_BIT; // 2
- ST7565_SND_BIT; // 3
- ST7565_SND_BIT; // 4
- ST7565_SND_BIT; // 5
- ST7565_SND_BIT; // 6
- ST7565_SND_BIT; // 7
- ST7565_SND_BIT; // 8
- }
-
- #define ST7565_WRITE_BYTE(a) { ST7565_SWSPI_SND_8BIT((uint8_t)a); U8G_DELAY; }
- #define ST7560_WriteSequence(count, pointer) { uint8_t *ptr = pointer; for (uint8_t i = 0; i < count; i++) {ST7565_SWSPI_SND_8BIT( *ptr++);} DELAY_10US; }
-#endif
-
-#if defined(DOGM_SPI_DELAY_US) && DOGM_SPI_DELAY_US > 0
- #define U8G_DELAY delayMicroseconds(DOGM_SPI_DELAY_US)
-#else
- #define U8G_DELAY u8g_10MicroDelay()
-#endif
-
-#define ST7565_CS() { WRITE(ST7565_CS_PIN,1); U8G_DELAY; }
-#define ST7565_NCS() { WRITE(ST7565_CS_PIN,0); }
-#define ST7565_A0() { WRITE(ST7565_A0_PIN,1); U8G_DELAY; }
-#define ST7565_NA0() { WRITE(ST7565_A0_PIN,0); }
-
-
-uint8_t u8g_dev_st7565_64128n_2x_VIKI_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg) {
- switch (msg) {
- case U8G_DEV_MSG_INIT: {
- OUT_WRITE(ST7565_CS_PIN, LOW);
- #if ENABLED(SHARED_SPI)
- u8g_Delay(250);
- spiBegin();
- #ifndef SPI_SPEED
- #define SPI_SPEED SPI_FULL_SPEED // use same SPI speed as SD card
- #endif
- spiInit(SPI_SPEED);
- #else
- OUT_WRITE(ST7565_DAT_PIN, LOW);
- OUT_WRITE(ST7565_CLK_PIN, LOW);
- #endif
- OUT_WRITE(ST7565_A0_PIN, LOW);
-
- ST7565_CS(); /* disable chip */
- ST7565_NA0(); /* instruction mode */
- ST7565_NCS(); /* enable chip */
-
- ST7565_WRITE_BYTE(0x0A2); /* 0x0A2: LCD bias 1/9 (according to Displaytech 64128N datasheet) */
- ST7565_WRITE_BYTE(0x0A0); /* Normal ADC Select (according to Displaytech 64128N datasheet) */
-
- ST7565_WRITE_BYTE(0x0C8); /* common output mode: set scan direction normal operation/SHL Select; 0x0C0 --> SHL = 0; normal; 0x0C8 --> SHL = 1 */
- ST7565_WRITE_BYTE(0x040); /* Display start line for Displaytech 64128N */
-
- ST7565_WRITE_BYTE(0x028 | 0x04); /* power control: turn on voltage converter */
- //U8G_ESC_DLY(50); /* delay 50 ms - hangs after a reset if used */
-
- ST7565_WRITE_BYTE(0x028 | 0x06); /* power control: turn on voltage regulator */
- //U8G_ESC_DLY(50); /* delay 50 ms - hangs after a reset if used */
-
- ST7565_WRITE_BYTE(0x028 | 0x07); /* power control: turn on voltage follower */
- //U8G_ESC_DLY(50); /* delay 50 ms - hangs after a reset if used */
-
- ST7565_WRITE_BYTE(0x010); /* Set V0 voltage resistor ratio. Setting for controlling brightness of Displaytech 64128N */
-
- ST7565_WRITE_BYTE(0x0A6); /* display normal, bit val 0: LCD pixel off. */
-
- ST7565_WRITE_BYTE(0x081); /* set contrast */
- ST7565_WRITE_BYTE(0x01E); /* Contrast value. Setting for controlling brightness of Displaytech 64128N */
-
- ST7565_WRITE_BYTE(0x0AF); /* display on */
-
- U8G_ESC_DLY(100); /* delay 100 ms */
- ST7565_WRITE_BYTE(0x0A5); /* display all points; ST7565 */
- U8G_ESC_DLY(100); /* delay 100 ms */
- U8G_ESC_DLY(100); /* delay 100 ms */
- ST7565_WRITE_BYTE(0x0A4); /* normal display */
- ST7565_CS(); /* disable chip */
- } /* end of sequence */
- break;
-
- case U8G_DEV_MSG_STOP: break;
-
- case U8G_DEV_MSG_PAGE_NEXT: {
- u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
- ST7565_CS(); /* disable chip */
- ST7565_NA0(); /* instruction mode */
- ST7565_NCS(); /* enable chip */
- ST7565_WRITE_BYTE(0x010); /* set upper 4 bit of the col adr to 0x10 */
- ST7565_WRITE_BYTE(0x000); /* set lower 4 bit of the col adr to 0x00. Changed for DisplayTech 64128N */
- /* end of sequence */
- ST7565_WRITE_BYTE(0x0B0 | (2*pb->p.page));; /* select current page (ST7565R) */
- ST7565_A0(); /* data mode */
- ST7560_WriteSequence( (uint8_t) pb->width, (uint8_t *)pb->buf);
- ST7565_CS(); /* disable chip */
- ST7565_NA0(); /* instruction mode */
- ST7565_NCS(); /* enable chip */
- ST7565_WRITE_BYTE(0x010); /* set upper 4 bit of the col adr to 0x10 */
- ST7565_WRITE_BYTE(0x000); /* set lower 4 bit of the col adr to 0x00. Changed for DisplayTech 64128N */
- /* end of sequence */
- ST7565_WRITE_BYTE(0x0B0 | (2*pb->p.page+1)); /* select current page (ST7565R) */
- ST7565_A0(); /* data mode */
- ST7560_WriteSequence( (uint8_t) pb->width, (uint8_t *)(pb->buf)+pb->width);
- ST7565_CS(); /* disable chip */
- }
- break;
-
- case U8G_DEV_MSG_CONTRAST:
- ST7565_NCS();
- ST7565_NA0(); /* instruction mode */
- ST7565_WRITE_BYTE(0x081);
- ST7565_WRITE_BYTE((*(uint8_t *)arg) >> 2);
- ST7565_CS(); /* disable chip */
- return 1;
-
- case U8G_DEV_MSG_SLEEP_ON:
- ST7565_NA0(); /* instruction mode */
- ST7565_NCS(); /* enable chip */
- ST7565_WRITE_BYTE(0x0AC); /* static indicator off */
- ST7565_WRITE_BYTE(0x000); /* indicator register set (not sure if this is required) */
- ST7565_WRITE_BYTE(0x0AE); /* display off */
- ST7565_WRITE_BYTE(0x0A5); /* all points on */
- ST7565_CS(); /* disable chip , bugfix 12 nov 2014 */
- /* end of sequence */
- return 1;
-
- case U8G_DEV_MSG_SLEEP_OFF:
- ST7565_NA0(); /* instruction mode */
- ST7565_NCS(); /* enable chip */
- ST7565_WRITE_BYTE(0x0A4); /* all points off */
- ST7565_WRITE_BYTE(0x0AF); /* display on */
- U8G_ESC_DLY(50); /* delay 50 ms */
- ST7565_CS(); /* disable chip , bugfix 12 nov 2014 */
- /* end of sequence */
- return 1;
- }
- return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
-}
-
-uint8_t u8g_dev_st7565_64128n_2x_VIKI_buf[WIDTH*2] U8G_NOCOMMON ;
-u8g_pb_t u8g_dev_st7565_64128n_2x_VIKI_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_st7565_64128n_2x_VIKI_buf};
-u8g_dev_t u8g_dev_st7565_64128n_2x_VIKI_sw_spi = { u8g_dev_st7565_64128n_2x_VIKI_fn, &u8g_dev_st7565_64128n_2x_VIKI_pb, &u8g_com_null_fn};
-
-
-class U8GLIB_ST7565_64128n_2x_VIKI : public U8GLIB {
- public:
- U8GLIB_ST7565_64128n_2x_VIKI(uint8_t dummy)
- : U8GLIB(&u8g_dev_st7565_64128n_2x_VIKI_sw_spi)
- { }
- U8GLIB_ST7565_64128n_2x_VIKI(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
- : U8GLIB(&u8g_dev_st7565_64128n_2x_VIKI_sw_spi)
- { }
-};
-
-#pragma GCC reset_options
-
-#endif // U8GLIB_ST7565
-#endif // ULCDST7565_H
diff --git a/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd.h b/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.cpp
similarity index 57%
rename from Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd.h
rename to Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.cpp
index ff0057b543..261b72607f 100644
--- a/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd.h
+++ b/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.cpp
@@ -1,6 +1,6 @@
/**
* Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
@@ -20,16 +20,25 @@
*
*/
-#ifndef ULCDST7920_H
-#define ULCDST7920_H
+// NOTE - the HAL version of the rrd device uses a generic ST7920 device. See the
+// file u8g_dev_st7920_128x64_HAL.cpp for the HAL version.
-#include "../../Marlin.h"
+#ifndef U8G_HAL_LINKS
-#if ENABLED(U8GLIB_ST7920)
+#include
+//#if ENABLED(U8GLIB_ST7920)
+//#if ( ENABLED(SHARED_SPI) || !ENABLED(SHARED_SPI) && (defined(LCD_PINS_D4) && LCD_PINS_D4 >= 0) && (defined(LCD_PINS_ENABLE) && LCD_PINS_ENABLE >= 0))
+
+#define ST7920_CLK_PIN 23
+#define ST7920_DAT_PIN 17
+#define ST7920_CS_PIN 16
+
+/*
#define ST7920_CLK_PIN LCD_PINS_D4
#define ST7920_DAT_PIN LCD_PINS_ENABLE
#define ST7920_CS_PIN LCD_PINS_RS
+*/
//#define PAGE_HEIGHT 8 //128 byte framebuffer
#define PAGE_HEIGHT 16 //256 byte framebuffer
@@ -52,15 +61,15 @@
#define CPU_ST7920_DELAY_1 DELAY_0_NOP
#define CPU_ST7920_DELAY_2 DELAY_0_NOP
#define CPU_ST7920_DELAY_3 DELAY_1_NOP
-#elif MB(3DRAG) || MB(K8200) || MB(K8400) || MB(SILVER_GATE)
+#elif (MOTHERBOARD == BOARD_3DRAG) || (MOTHERBOARD == BOARD_K8200) || (MOTHERBOARD == BOARD_K8400)
#define CPU_ST7920_DELAY_1 DELAY_0_NOP
#define CPU_ST7920_DELAY_2 DELAY_3_NOP
#define CPU_ST7920_DELAY_3 DELAY_0_NOP
-#elif MB(MINIRAMBO)
+#elif (MOTHERBOARD == BOARD_MINIRAMBO)
#define CPU_ST7920_DELAY_1 DELAY_0_NOP
#define CPU_ST7920_DELAY_2 DELAY_4_NOP
#define CPU_ST7920_DELAY_3 DELAY_0_NOP
-#elif MB(RAMBO)
+#elif (MOTHERBOARD == BOARD_RAMBO)
#define CPU_ST7920_DELAY_1 DELAY_0_NOP
#define CPU_ST7920_DELAY_2 DELAY_0_NOP
#define CPU_ST7920_DELAY_3 DELAY_0_NOP
@@ -88,37 +97,23 @@
#define U8G_DELAY() u8g_10MicroDelay()
#endif
-#if ENABLED(SHARED_SPI) // Re-ARM requires that the LCD and the SD card share a single SPI
- #define ST7920_SET_CMD() { spiSend(0xF8); U8G_DELAY(); }
- #define ST7920_SET_DAT() { spiSend(0xFA); U8G_DELAY(); }
- #define ST7920_WRITE_BYTE(a) { spiSend((uint8_t)((a)&0xF0u)); U8G_DELAY(); spiSend((uint8_t)((a)<<4u)); U8G_DELAY(); }
- #define ST7920_WRITE_BYTES(p,l) { for (uint8_t i = l + 1; --i;) { spiSend(*p&0xF0); spiSend(*p<<4); p++; } U8G_DELAY(); }
-
-#else
- #define ST7920_SND_BIT \
- WRITE(ST7920_CLK_PIN, LOW); ST7920_DELAY_1; \
- WRITE(ST7920_DAT_PIN, val & 0x80); ST7920_DELAY_2; \
- WRITE(ST7920_CLK_PIN, HIGH); ST7920_DELAY_3; \
- val <<= 1
-
- static void ST7920_SWSPI_SND_8BIT(uint8_t val) {
- ST7920_SND_BIT; // 1
- ST7920_SND_BIT; // 2
- ST7920_SND_BIT; // 3
- ST7920_SND_BIT; // 4
- ST7920_SND_BIT; // 5
- ST7920_SND_BIT; // 6
- ST7920_SND_BIT; // 7
- ST7920_SND_BIT; // 8
+static void ST7920_WRITE_BYTE(uint8_t val) {
+ for (uint8_t i = 0; i < 8; i++) {
+ WRITE(ST7920_DAT_PIN, val & 0x80);
+ WRITE(ST7920_CLK_PIN, HIGH);
+ WRITE(ST7920_CLK_PIN, LOW);
+ val = val << 1;
}
+}
+
+
+#define ST7920_SET_CMD() { ST7920_WRITE_BYTE(0xF8); U8G_DELAY(); }
+#define ST7920_SET_DAT() { ST7920_WRITE_BYTE(0xFA); U8G_DELAY(); }
+#define ST7920_WRITE_NIBBLES(a) { ST7920_WRITE_BYTE((uint8_t)((a)&0xF0u)); ST7920_WRITE_BYTE((uint8_t)((a)<<4u)); U8G_DELAY(); }
+#define ST7920_WRITE_NIBBLES_P(p,l) { for (uint8_t i = l + 1; --i;) { ST7920_WRITE_BYTE(*p&0xF0); ST7920_WRITE_BYTE(*p<<4); p++; } U8G_DELAY(); }
- #define ST7920_SET_CMD() { ST7920_SWSPI_SND_8BIT(0xF8); U8G_DELAY(); }
- #define ST7920_SET_DAT() { ST7920_SWSPI_SND_8BIT(0xFA); U8G_DELAY(); }
- #define ST7920_WRITE_BYTE(a) { ST7920_SWSPI_SND_8BIT((uint8_t)((a)&0xF0u)); ST7920_SWSPI_SND_8BIT((uint8_t)((a)<<4u)); U8G_DELAY(); }
- #define ST7920_WRITE_BYTES(p,l) { for (uint8_t i = l + 1; --i;) { ST7920_SWSPI_SND_8BIT(*p&0xF0); ST7920_SWSPI_SND_8BIT(*p<<4); p++; } U8G_DELAY(); }
-#endif
#define ST7920_CS() { WRITE(ST7920_CS_PIN,1); U8G_DELAY(); }
#define ST7920_NCS() { WRITE(ST7920_CS_PIN,0); }
@@ -131,47 +126,35 @@ uint8_t u8g_dev_rrd_st7920_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, vo
case U8G_DEV_MSG_INIT: {
OUT_WRITE(ST7920_CS_PIN, LOW);
- #if ENABLED(SHARED_SPI)
- u8g_Delay(250);
- spiBegin();
- spiInit(SPI_EIGHTH_SPEED); // run LCD at 1 MHz - garbled display if run at 2 MHz
- #else
+
OUT_WRITE(ST7920_DAT_PIN, LOW);
- OUT_WRITE(ST7920_CLK_PIN, HIGH);
- #endif
+ OUT_WRITE(ST7920_CLK_PIN, LOW);
ST7920_CS();
u8g_Delay(120); //initial delay for boot up
ST7920_SET_CMD();
- ST7920_WRITE_BYTE(0x08); //display off, cursor+blink off
- ST7920_WRITE_BYTE(0x01); //clear CGRAM ram
+ ST7920_WRITE_NIBBLES(0x08); //display off, cursor+blink off
+ ST7920_WRITE_NIBBLES(0x01); //clear CGRAM ram
u8g_Delay(15); //delay for CGRAM clear
- ST7920_WRITE_BYTE(0x3E); //extended mode + GDRAM active
+ ST7920_WRITE_NIBBLES(0x3E); //extended mode + GDRAM active
for (y = 0; y < (LCD_PIXEL_HEIGHT) / 2; y++) { //clear GDRAM
- ST7920_WRITE_BYTE(0x80 | y); //set y
- ST7920_WRITE_BYTE(0x80); //set x = 0
+ ST7920_WRITE_NIBBLES(0x80 | y); //set y
+ ST7920_WRITE_NIBBLES(0x80); //set x = 0
ST7920_SET_DAT();
for (i = 0; i < 2 * (LCD_PIXEL_WIDTH) / 8; i++) //2x width clears both segments
- ST7920_WRITE_BYTE(0);
+ ST7920_WRITE_NIBBLES(0);
ST7920_SET_CMD();
}
- ST7920_WRITE_BYTE(0x0C); //display on, cursor+blink off
- #if ENABLED(SHARED_SPI)
- #ifndef SPI_SPEED
- #define SPI_SPEED SPI_FULL_SPEED // switch SPI speed back to SD card speed
- #endif
- spiInit(SPI_SPEED);
- #endif
+ ST7920_WRITE_NIBBLES(0x0C); //display on, cursor+blink off
+
ST7920_NCS();
}
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_NEXT: {
- #if ENABLED(SHARED_SPI)
- spiInit(SPI_EIGHTH_SPEED); // run LCD at 1 MHz - garbled display if run at 2 MHz
- #endif
+
uint8_t* ptr;
u8g_pb_t* pb = (u8g_pb_t*)(dev->dev_mem);
y = pb->p.page_y0;
@@ -181,20 +164,18 @@ uint8_t u8g_dev_rrd_st7920_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, vo
for (i = 0; i < PAGE_HEIGHT; i ++) {
ST7920_SET_CMD();
if (y < 32) {
- ST7920_WRITE_BYTE(0x80 | y); //y
- ST7920_WRITE_BYTE(0x80); //x=0
+ ST7920_WRITE_NIBBLES(0x80 | y); //y
+ ST7920_WRITE_NIBBLES(0x80); //x=0
}
else {
- ST7920_WRITE_BYTE(0x80 | (y - 32)); //y
- ST7920_WRITE_BYTE(0x80 | 8); //x=64
+ ST7920_WRITE_NIBBLES(0x80 | (y - 32)); //y
+ ST7920_WRITE_NIBBLES(0x80 | 8); //x=64
}
ST7920_SET_DAT();
- ST7920_WRITE_BYTES(ptr, (LCD_PIXEL_WIDTH) / 8); //ptr is incremented inside of macro
+ ST7920_WRITE_NIBBLES_P(ptr, (LCD_PIXEL_WIDTH) / 8); //ptr is incremented inside of macro
y++;
}
- #if ENABLED(SHARED_SPI)
- spiInit(SPI_SPEED); // switch SPI speed back to SD card speed
- #endif
+
ST7920_NCS();
}
break;
@@ -212,12 +193,8 @@ uint8_t u8g_dev_st7920_128x64_rrd_buf[(LCD_PIXEL_WIDTH) * (PAGE_HEIGHT) / 8] U
u8g_pb_t u8g_dev_st7920_128x64_rrd_pb = {{PAGE_HEIGHT, LCD_PIXEL_HEIGHT, 0, 0, 0}, LCD_PIXEL_WIDTH, u8g_dev_st7920_128x64_rrd_buf};
u8g_dev_t u8g_dev_st7920_128x64_rrd_sw_spi = {u8g_dev_rrd_st7920_128x64_fn, &u8g_dev_st7920_128x64_rrd_pb, &u8g_com_null_fn};
-class U8GLIB_ST7920_128X64_RRD : public U8GLIB {
- public:
- U8GLIB_ST7920_128X64_RRD(uint8_t dummy) : U8GLIB(&u8g_dev_st7920_128x64_rrd_sw_spi) { UNUSED(dummy); }
-};
-
#pragma GCC reset_options
-#endif // U8GLIB_ST7920
-#endif // ULCDST7920_H
+//#endif //( ENABLED(SHARED_SPI) || !ENABLED(SHARED_SPI) && (defined(LCD_PINS_D4) && LCD_PINS_D4 >= 0) && (defined(LCD_PINS_ENABLE) && LCD_PINS_ENABLE >= 0))
+//#endif // U8GLIB_ST7920
+#endif // AVR
diff --git a/Marlin/src/lcd/ultralcd.cpp b/Marlin/src/lcd/ultralcd.cpp
index 043380def3..9a3f513ed2 100644
--- a/Marlin/src/lcd/ultralcd.cpp
+++ b/Marlin/src/lcd/ultralcd.cpp
@@ -4758,6 +4758,11 @@ void lcd_update() {
#if ENABLED(DOGLCD) // Changes due to different driver architecture of the DOGM display
if (!drawing_screen) {
+#if defined(TARGET_LPC1768)
+digitalWrite(P1_4, !digitalRead(P1_4)); //re-arm (was 77 in the old system)
+#else
+digitalWrite(29, !digitalRead(29)); //2560
+#endif
u8g.firstPage();
drawing_screen = 1;
}
diff --git a/Marlin/src/lcd/ultralcd_impl_DOGM.h b/Marlin/src/lcd/ultralcd_impl_DOGM.h
index 5d3f15ab40..bb6fddfd85 100644
--- a/Marlin/src/lcd/ultralcd_impl_DOGM.h
+++ b/Marlin/src/lcd/ultralcd_impl_DOGM.h
@@ -44,11 +44,13 @@
*/
#include "ultralcd.h"
+/*
#if ENABLED(U8GLIB_ST7565_64128N)
#include "dogm/ultralcd_st7565_u8glib_VIKI.h"
#elif ENABLED(U8GLIB_ST7920)
#include "dogm/ultralcd_st7920_u8glib_rrd.h"
#endif
+*/
#include "dogm/dogm_bitmaps.h"
@@ -57,6 +59,7 @@
#endif
#include
+#include
#if ENABLED(AUTO_BED_LEVELING_UBL)
#include "../feature/bedlevel/ubl/ubl.h"
@@ -161,53 +164,52 @@
// LCD selection
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
- U8GLIB_ST7920_128X64_4X u8g(LCD_PINS_RS); // 2 stripes
- // U8GLIB_ST7920_128X64 u8g(LCD_PINS_RS); // 8 stripes
-#elif ENABLED(U8GLIB_ST7920)
- //U8GLIB_ST7920_128X64_4X u8g(LCD_PINS_D4, LCD_PINS_ENABLE, LCD_PINS_RS); // Original u8glib device. 2 stripes
- // No 4 stripe device available from u8glib.
- //U8GLIB_ST7920_128X64_1X u8g(LCD_PINS_D4, LCD_PINS_ENABLE, LCD_PINS_RS); // Original u8glib device. 8 stripes
- U8GLIB_ST7920_128X64_RRD u8g(0); // Number of stripes can be adjusted in ultralcd_st7920_u8glib_rrd.h with PAGE_HEIGHT
+ U8GLIB_ST7920_128X64_4X u8g(LCD_PINS_RS); // 2 stripes, HW SPI
+ //U8GLIB_ST7920_128X64_4X u8g(LCD_PINS_D4, LCD_PINS_ENABLE, LCD_PINS_RS); // Original u8glib device. 2 stripes, SW SPI
+#elif ENABLED(U8GLIB_ST7920)
+ // RepRap Discount Full Graphics Smart Controller
+ //U8GLIB_ST7920_128X64_4X u8g(LCD_PINS_RS); // 2 stripes, HW SPI
+ //U8GLIB_ST7920_128X64_4X u8g(LCD_PINS_D4, LCD_PINS_ENABLE, LCD_PINS_RS); // Original u8glib device. 2 stripes, SW SPI
+ U8GLIB_ST7920_128X64_RRD u8g(LCD_PINS_D4, LCD_PINS_ENABLE, LCD_PINS_RS); // Number of stripes can be adjusted in ultralcd_st7920_u8glib_rrd.h with PAGE_HEIGHT
+ // AVR version ignores these pin settings
+ // HAL version uses these pin settings
#elif ENABLED(CARTESIO_UI)
// The CartesioUI display
- #if DOGLCD_MOSI != -1 && DOGLCD_SCK != -1
- // using SW-SPI
- //U8GLIB_DOGM128 u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0); // 8 stripes
- U8GLIB_DOGM128_2X u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0); // 4 stripes
- #else
- //U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0); // 8 stripes
+ //U8GLIB_DOGM128_2X u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0); // 4 stripes
U8GLIB_DOGM128_2X u8g(DOGLCD_CS, DOGLCD_A0); // 4 stripes
- #endif
+
#elif ENABLED(U8GLIB_LM6059_AF)
// Based on the Adafruit ST7565 (http://www.adafruit.com/products/250)
- //U8GLIB_LM6059 u8g(DOGLCD_CS, DOGLCD_A0); // 8 stripes
- U8GLIB_LM6059_2X u8g(DOGLCD_CS, DOGLCD_A0); // 4 stripes
+ //U8GLIB_LM6059 u8g(DOGLCD_CS, DOGLCD_A0); // 8 stripes
+ U8GLIB_LM6059_2X u8g(DOGLCD_CS, DOGLCD_A0); // 4 stripes
#elif ENABLED(U8GLIB_ST7565_64128N)
// The MaKrPanel, Mini Viki, and Viki 2.0, ST7565 controller
- //U8GLIB_ST7565_64128n_2x_VIKI u8g(0); // using SW-SPI DOGLCD_MOSI != -1 && DOGLCD_SCK
- U8GLIB_ST7565_64128n_2x_VIKI u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0); // using SW-SPI
- //U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0); // 8 stripes
- //U8GLIB_NHD_C12864_2X u8g(DOGLCD_CS, DOGLCD_A0); // 4 stripes HWSPI
+ //U8GLIB_64128N_2X_HAL u8g(DOGLCD_CS, DOGLCD_A0); // using HW-SPI
+ U8GLIB_64128N_2X_HAL u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0); // using SW-SPI
+
#elif ENABLED(U8GLIB_SSD1306)
// Generic support for SSD1306 OLED I2C LCDs
- //U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST); // 8 stripes
- U8GLIB_SSD1306_128X64_2X u8g(U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST); // 4 stripes
+ //U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST); // 8 stripes
+ U8GLIB_SSD1306_128X64_2X_I2C_2_WIRE u8g(U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST); // 4 stripes
+ //U8GLIB_SSD1306_128X64_2X u8g(U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST); // 4 stripes
+
#elif ENABLED(MKS_12864OLED)
// MKS 128x64 (SH1106) OLED I2C LCD
- U8GLIB_SH1106_128X64 u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0); // 8 stripes
- //U8GLIB_SH1106_128X64_2X u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0); // 4 stripes
+ U8GLIB_SH1106_128X64 u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0); // 8 stripes
+ //U8GLIB_SH1106_128X64_2X u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0); // 4 stripes
#elif ENABLED(U8GLIB_SH1106)
// Generic support for SH1106 OLED I2C LCDs
- //U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST); // 8 stripes
- U8GLIB_SH1106_128X64_2X u8g(U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST); // 4 stripes
+ //U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST); // 8 stripes
+ U8GLIB_SH1106_128X64_2X_I2C_2_WIRE u8g(U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST); // 4 stripes
+ //U8GLIB_SH1106_128X64_2X u8g(U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST); // 4 stripes
#elif ENABLED(MINIPANEL)
// The MINIPanel display
- //U8GLIB_MINI12864 u8g(DOGLCD_CS, DOGLCD_A0); // 8 stripes
- U8GLIB_MINI12864_2X u8g(DOGLCD_CS, DOGLCD_A0); // 4 stripes
+ //U8GLIB_MINI12864 u8g(DOGLCD_CS, DOGLCD_A0); // 8 stripes
+ U8GLIB_MINI12864_2X u8g(DOGLCD_CS, DOGLCD_A0); // 4 stripes
#else
// for regular DOGM128 display with HW-SPI
- //U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0); // HW-SPI Com: CS, A0 // 8 stripes
- U8GLIB_DOGM128_2X u8g(DOGLCD_CS, DOGLCD_A0); // HW-SPI Com: CS, A0 // 4 stripes
+ //U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0); // HW-SPI Com: CS, A0 // 8 stripes
+ U8GLIB_DOGM128_2X u8g(DOGLCD_CS, DOGLCD_A0); // HW-SPI Com: CS, A0 // 4 stripes
#endif
#ifndef LCD_PIXEL_WIDTH
@@ -311,6 +313,8 @@ void lcd_printPGM_utf(const char *str, uint8_t n=LCD_WIDTH) {
const uint8_t offx = (u8g.getWidth() - (START_BMPWIDTH)) / 2,
txt1X = (u8g.getWidth() - (sizeof(STRING_SPLASH_LINE1) - 1) * (DOG_CHAR_WIDTH)) / 2;
+ static bool show_bootscreen = true;
+
u8g.firstPage();
do {
u8g.drawBitmapP(offx, offy, START_BMPBYTEWIDTH, START_BMPHEIGHT, start_bmp);
@@ -354,6 +358,7 @@ static void lcd_implementation_init() {
#elif ENABLED(LCD_SCREEN_ROT_270)
u8g.setRot270(); // Rotate screen by 270°
#endif
+
}
// The kill screen is displayed for unrecoverable conditions
diff --git a/platformio.ini b/platformio.ini
index a918a94be4..66b3dd134a 100644
--- a/platformio.ini
+++ b/platformio.ini
@@ -19,13 +19,15 @@ env_default = megaatmega2560
[common]
lib_deps =
- U8glib@1.19.1
+
LiquidCrystal_I2C@1.1.2
https://github.com/lincomatic/LiquidTWI2.git
https://github.com/teemuatlut/TMC2130Stepper.git
https://github.com/trinamic/TMC26XStepper.git
https://github.com/adafruit/Adafruit_NeoPixel.git
https://github.com/ameyer/Arduino-L6470.git
+ U8glib-HAL
+
default_src_filter = + -
@@ -47,6 +49,7 @@ platform = atmelavr
framework = arduino
board = megaatmega2560
build_flags = -I $BUILDSRC_DIR
+ -fmax-errors=5
board_f_cpu = 16000000L
lib_deps = ${common.lib_deps}
src_filter = ${common.default_src_filter}
@@ -145,11 +148,14 @@ src_filter = ${common.default_src_filter}
platform = nxplpc
board_f_cpu = 100000000L
build_flags = !python Marlin/src/HAL/HAL_LPC1768/lpc1768_flag_script.py
+ -DU8G_HAL_LINKS
src_build_flags = -Wall
build_unflags = -Wall
lib_ldf_mode = off
lib_extra_dirs = frameworks
-lib_deps = U8glib-ARM, CMSIS-LPC1768
+#lib_deps = U8glib-ARM, CMSIS-LPC1768
+lib_deps = CMSIS-LPC1768
+ U8glib-HAL
extra_scripts = Marlin/src/HAL/HAL_LPC1768/lpc1768_flag_script.py
src_filter = ${common.default_src_filter}
@@ -163,9 +169,11 @@ platform = nxplpc
board = lpc1768
board_f_cpu = 100000000L
build_flags = !python Marlin/src/HAL/HAL_LPC1768/lpc1768_flag_script.py
+ -DU8G_HAL_LINKS
lib_ldf_mode = off
lib_extra_dirs = frameworks
-lib_deps = U8glib-ARM, CMSIS-LPC1768
+lib_deps = CMSIS-LPC1768
+ U8glib-HAL
src_filter = ${common.default_src_filter}
extra_scripts = Marlin/src/HAL/HAL_LPC1768/debug_extra_script.py, Marlin/src/HAL/HAL_LPC1768/lpc1768_flag_script.py
debug_tool = custom
@@ -190,4 +198,3 @@ board = genericSTM32F103RE
build_flags = !python Marlin/src/HAL/HAL_STM32F1/stm32f1_flag_script.py
lib_deps = ${common.lib_deps}
src_filter = ${common.default_src_filter}
-